Video | VideoJet X10/X20/X40 Rugged Video Encoder

VideoJet X10/X20/X40 Rugged Video

Encoder
www.boschsecurity.com

u Ruggedized for extended environmental conditions

u High-quality MPEG‑4 video over IP

u H.264 Baseline Profile encoding

u Units with one, two, or four video inputs

u Built-in Intelligence-at-the-Edge

The Bosch VideoJet X encoders belong to a family of Flexibility

industrial, high-performance, single-, dual-, or quad- VideoJet X encoders offer unparalleled recording
input CCTV video encoders. They are built into a flexibility. Stream video across the network and store
rugged housing and constructed to withstand extreme it using Network Video Recorders (NVRs). Record
environmental conditions. The VideoJet X encoders locally on CompactFlash, an external USB hard drive,
may be used at extreme temperatures, operating from or use an optional automotive-grade internal hard
-30 °C to +60 °C (-22 °F to +140 °F). These powerful drive. Network-attached RAID iSCSI storage devices
and flexible devices represent the cutting edge of high- can also be used. The built-in iSCSI support enables
performance Video-over-IP for CCTV today. the VideoJet X encoders to act as conventional DVRs
while streaming high-performance live video across the
Functions network.
Rugged Environments Dual Streaming
VideoJet X encoders are ideal for outdoor applications The VideoJet X encoders use Dual Streaming to
such as perimeter, border, and fence control, as well generate two independent IP video streams per
as for industrial applications where they are tolerant of channel if sufficient computational power is available.
harsh environments. This allows viewing and recording at two different
When used at remote locations you benefit from their quality levels to save disk space and bandwidth. On
wide 10 to 30 VDC power input range, so that they can alarm, they can send an e‑mail with JPEG images
be battery or solar powered. You also benefit from attached.
their SFP (small form-factor pluggable) slot that allows
Dual Recording
a direct connection to a fiber interface module without You can record the streams independently on different
the need for external fiber hardware. media. Thus video can be recorded centrally on iSCSI
Their industrial-grade vibration resistance makes these drives managed by VRM Video Recording Manager and
encoders extremely suitable for use in mobile redundantly on the local media. If necessary, for
applications such as trains, busses, or other vehicles.
2 | VideoJet X10/X20/X40 Rugged Video Encoder

example in case of a network failure VRM can fill up RADIUS server for identification. You can secure Web
the gap in the central recording (ANR, Automatic browser access by HTTPS using a SSL certificate that
Network Replenishment). is stored in the unit. For total data protection, each
communication channel—video, audio, or serial I/O—
Recording Profiles
can be independently AES encrypted with 128‑bit
The encoders feature a highly flexible recording
keys, once the Encryption Site License has been
scheduler, providing up to ten programmable
applied.
recording profiles and allowing individually assigned
camera profiles. With these profiles, you can Intelligence
accelerate the frame rate as well as increase the With built-in video content analysis, VideoJet X
resolution on alarm, saving recording space during encoders reinforce the Intelligence-at-the-Edge
non-alarm periods. concept where edge devices become increasingly
intelligent. The VideoJet X comes with built-in MOTION
H.264 Baseline Profile Encoding
+ video motion detection. This motion detection
Firmware 4.0 enables the Bosch VideoJet X encoders
algorithm is based on pixel change and includes object
to use H.264 Baseline Profile to encode the video
size filtering capabilities and sophisticated tamper
signal. This allows reducing the required bit rate for a
detection capabilities.
given quality setting, or increasing the quality when
Bosch offers more advanced video content analysis
keeping the bit rate setting.
(VCA) applications with its Intelligent Video Analysis
Frame Rates and Resolution (IVA). A licensable option, it bases the IVA algorithm
When one or two inputs are used, the encoders deliver on digital imaging technology that uses multi-level
MPEG‑4 video over IP at a full frame rate of 25 (PAL) image analysis of pixel, texture, and motion
or 30 (NTSC) images per second with up to 4CIF (trajectory) changes.
resolution on every channel. If four inputs are used the
maximum frame rate is 12.5/15 images per second at Viewing
View the VideoJet X encoder video on a PC using a
4CIF resolution and no Dual Streaming is possible.
Web browser, in the Bosch Video Management
Because H.264 Baseline Profile does not support field
System, or integrate it into another video management
encoding, interlaced video is not possible, thus
system. By routing the IP video to a high-performance
resolution is limited to a maximum of 2CIF. H.264
VIP XD video decoder or a VIDOS Monitor Wall, you
encoding requires the double performance in respect
can present the video with ultimate clarity.
to MPEG‑4. Frame rate values must therefore be
divided by two. Camera control
The maximum frame rates listed in the tables below Configure and control your camera or dome using one
depend on the resolution, picture content and of the various pre-defined control protocols.
movement, and the number of inputs used. VideoJet X encoders provide a serial interface and
alternatively support Bilinx communication over coax
MPEG‑4 4 inputs 2 inputs 1 input cable.
4CIF 12.5/15 ips 25/30 ips 25/30 ips Easy Upgrade
Remotely upgrade the VideoJet X encoders whenever
2/3 D1 25/30 ips 25/30 ips 25/30 ips
new firmware becomes available. This ensures up-to-
2CIF 25/30 ips 25/30 ips 25/30 ips date products, thus protecting investment with little
ips = frame rate in images per second effort.
ONVIF conformance
H.264 4 inputs 2 inputs 1 input Firmware 4.10 introduces conformance to the ONVIF
2CIF 12.5/15 ips 25/30 ips 25/30 ips (Open Network Video Interface Forum) specification
guaranteeing interoperability between network video
ips = frame rate in images per second products regardless of manufacturer. ONVIF
Reliability conformant devices are able to exchange live video,
Designed for reliability, the VideoJet X encoders audio, metadata and control information and ensure
feature a wide temperature range power supply, dual- that they are automatically discovered and connected
redundant Ethernet network ports, a third SFP to network applications such as video management
network slot with switching capability between the systems.
network ports, dual USB ports, and fault-tolerant mass
storage via iSCSI. Certifications and approvals

Access Security Approvals

The VideoJet X encoders offer various security levels
for accessing the network, the unit, and the data
channels. As well as password protection with three
levels, they support 802.1x authentication using a
3 | VideoJet X10/X20/X40 Rugged Video Encoder

Safety Installation/configuration notes

Region Number Front Connectors and Indicators
IEC 60950

System

Region Number

IEC 62676-2

EN50132-5-2

Electromagnetic Compatibility

Region Number

EU EN55103-1 Video and audio equipment 1 2 3 4 5 6

VideoJet X40—front
EN50130-4 Alarm systems

EN55022 ITE 1 USB 1 and 2

EN55024 ITE 2 Video input 1 (2, 3, and 4 where applicable)

EN50121-4 Railway applications 3 2‑channel audio input (1‑channel for X10)

4 1‑channel audio output
EN61000-3-2
5 LED HDD (only operates on HDD versions)
EN61000-3-3
6 LED Connect
AUS/NZ AS/NZS 3548 Class B

US FCC 47 CFR Chapter 1 Part 15 Rear Connectors and Indicators

Environment

Region Number

EU EN60068-2-6 Fc Sinusoidal vibration

EN60068-2-30 Db Damp heat

EN60068-2-1 Ab Cold storage

EN60068-2-2 Bb Hot storage

EN60068-2-14 Na Change of temperature

1 2 3 4 5
Region Certification
VideoJet X series—rear
Europe CE VideoJet X10/X20/X40
1 SFP GBIC slot
USA UL VideoJet X10/X20/X40, X40 SN
2 Compact Flash slot
UL Bosch UL online certifications directory
(link) 3 Ethernet 1 and 2
4 Alarm input, relay output, serial interface, and power input on
separate connector blocks
5 LED Power On

Parts included

Quantit Component
y
1 VideoJet X10 encoder with 1 video input, or
VideoJet X20 encoder with 2 video inputs, or
VideoJet X40 encoder with 4 video inputs
4 | VideoJet X10/X20/X40 Rugged Video Encoder

1 Quick Installation Guide Resolution Horizontal x vertical PAL/NTSC

1 CD-ROM with software and documentation • 4CIF (MPEG‑4 X10/X20: 704 x 576/480 (25/30 ips*)
only)
1 Drilling template
X40: 704 x 576/480 (12.5/15 ips*; all
1 Set of spring clamp contact connectors
inputs used)
An optional extended temperature range power supply
• 2CIF 704 x 288/240 (25/30 ips*)
can be ordered separately with power cord versions
for the EU/US, UK, and AUS regions. • 2/3 D1 464 x 576/480 (25/30 ips*)

Technical specifications • 1/2 D1 352 x 576/480 (25/30 ips*)

• CIF 352 x 288/240 (25/30 ips*)

Electrical
• QCIF 176 x 144/120 (25/30 ips*)
Power supply Via external unit or external battery
* Depending on encoding algorithm, picture
Input voltage 10 to 30 VDC
content and movement
Power consumption X10: approx. 16 VA, fully equipped
GOP structure I, IP
X20/X40: approx. 22 VA, fully equipped
Overall IP delay 120 ms

Input/output Frame rate 1 to 50/60 (PAL/NTSC)

Video X10: 1 x input

Audio
X20: 2 x input
Standard G.711; 300 Hz to 3.4 kHz
X40: 4 x input
Data rate 80 kbps at 8 kHz sampling rate
• connector BNC
Network
• impedance 75 ohm, switchable
Ethernet Dual port 10/100 Base‑T, auto-sensing,
• signal Analog composite, 0.7 to 1.2 Vpp, NTSC or half/full duplex, RJ45
PAL
SFP 1 x 1 Gbps SFP (small form-factor
Audio X10: 1 x mono line in, 1 x mono line out pluggable) slot for optional standard SFP
GBIC module
X20/X40: 2 x mono line in, 1 x mono line
out Protocols RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS,
FTP, DHCP, IGMP V2/V3, ICMP, ARP, RTSP,
• connector 2 x 3.5 mm stereo jack
SMTP, SNTP, SNMP (V1, MIB‑II), 802.1x
• signal line in 9 kohm typical, 5.5 Vpp max
Encryption TLS 1.0, SSL, AES (optional)
• signal line out 3.0 Vpp at 10 kohm / 1.7 Vpp at 16 ohm
typical Control
Alarm 4 x input Software update Flash ROM, remote programmable
• connector Clamp (non-isolated closing contact) Configuration Configuration Manager or Web browser
• activation 10 ohm max Camera control Via serial interface;
resistance supported* protocols and devices:
Relay 4 x output • Bosch Autodome, HSPT, MIC1-300 IP, TC8x00
• connector Clamp • Canon VCC1, VC-C4R
• signal 30 Vpp (SELV), 2 A • CBC SMD 12P/12PII/20P
COM port Clamp, RS‑232/422/485 • JVC TK-C676

• Panasonic WV-CS850
Video
• Pelco Spectra D/P
Standards H.264 Baseline Profile (ISO/IEC 14496‑10)
MPEG‑4, M‑JPEG, JPEG • Sensomatic SpeedDome Ultra
Data rates 9.6 kbps to 6 Mbps per channel • Sony EVI D30/31/D100
5 | VideoJet X10/X20/X40 Rugged Video Encoder

• Ultrak KD6 VJT‑X40S‑H008

VideoJet X40 with 4 video inputs and a 80 GB hard
• VT VPT4x
disk
• * Basic functions only, no claim for full Order number VJT-X40S-H008
functionality valid. Bosch may not be made
Accessories
responsible if functions are not
implemented or not working under all VJT‑XACC‑PS
circumstances. VJX10/20/40 wide‑range extended-temperature power
supply
Connections Order number VJT-XACC-PS
CompactFlash 1 x CF slot for optional standard Type I/II VJT‑XACC‑PSUK
CompactFlash memory card
VJX10/20/40 wide‑range extended-temperature power
USB ports 2 x USB 2.0 high-speed ports, 2.5 W max supply for UK
feed each Order number VJT-XACC-PSUK

VJT‑XACC‑PSAU
Mechanical
VJX10/20/40 wide‑range extended-temperature power
Dimensions (H x W x D) 61 x 160 x 178 mm (2.4 x 6.3 x 7.01 in) supply for AUS
Order number VJT-XACC-PSAU
Weight Approx. 1.5 kg (3.3 lb) with HDD
DVA-12T-04100RA iSCSI Diskarray 12-bay
Environmental 4 HDD, 4 TB
Order number DVA-12T-04100RA
Operating temperature -30 °C to +60 °C (-22 °F to +140 °F)
ambient temperature
DVA-12T-12100RA iSCSI Diskarray 12-bay
Storage temperature -40 °C to +70 °C (-40 °F to +158 °F) 12 HDD, 12 TB
ambient temperature Order number DVA-12T-12100RA

Relative humidity 0 to 95% atmospheric humidity, non- DSA-N2B20-06AT

condensing iSCSI disk array, base unit with 6 x 1 TB SATA hard
Thermal value X10: 55 BTU/h max, fully equipped disk
Order number DSA-N2B20-06AT
X20/X40: 75 BTU/h max, fully equipped
DSA-N2B20-12AT
Altitude X10/X20/X40 with hard disk: iSCSI disk array, base unit with 12 x 1 TB SATA hard
• Operating -300 m to 5,000 m (-1,000 ft to 16,400 ft) disk
Order number DSA-N2B20-12AT
• Non-operating -300 m to 12,100 m (-1,000 ft to
40,000 ft) DSA-N2B50-20AT
Base unit with 20 x 1 TB SATA hard disk
Ordering information Order number DSA-N2B50-20AT

VJT‑X10S Software Options

VideoJet X10 with 1 video input IVA license single channel encoder
Order number VJT-X10S IVA 4.xx/5.xx VCA software license for single channel
encoder (e‑license)
VJT‑X10S‑H008 Order number MVC-FIVA4-ENC1
VideoJet X10 with 1 video input and a 80 GB hard disk
Order number VJT-X10S-H008 MVC-FIVA4-ENC2
IVA 4.xx/5.xx VCA software license for dual channel
VJT‑X20S encoder (e‑license)
VideoJet X20 with 2 video inputs Order number MVC-FIVA4-ENC2
Order number VJT-X20S
IVA license quad channel encoder
VJT‑X20S‑H008 IVA 4.xx/5.xx VCA software license for quad channel
VideoJet X20 with 2 video inputs and a 80 GB hard encoder (e‑license)
disk Order number MVC-FIVA4-ENC4
Order number VJT-X20S-H008

VJT‑X40S
VideoJet X40 with 4 video inputs
Order number VJT-X40S
 6 | VideoJet X10/X20/X40 Rugged Video Encoder

BVIP AES 128 Bit Encryption

One-time installation licence for BVIP AES 128‑bit
encryption site. Enables encrypted communication
between BVIP devices and management stations.
Order number MVS-FENC-AES

Represented by:

Americas: Europe, Middle East, Africa: Asia-Pacific: China: America Latina:

Bosch Security Systems, Inc. Bosch Security Systems B.V. Robert Bosch (SEA) Pte Ltd, Security Bosch (Shanghai) Security Systems Ltd. Robert Bosch Ltda Security Systems Division
130 Perinton Parkway P.O. Box 80002 Systems 201 Building, No. 333 Fuquan Road Via Anhanguera, Km 98
Fairport, New York, 14450, USA 5617 BA Eindhoven, The Netherlands 11 Bishan Street 21 North IBP CEP 13065-900
Phone: +1 800 289 0096 Phone: + 31 40 2577 284 Singapore 573943 Changning District, Shanghai Campinas, Sao Paulo, Brazil
Fax: +1 585 223 9180 Fax: +31 40 2577 330 Phone: +65 6571 2808 200335 China Phone: +55 19 2103 2860
[email protected] [email protected] Fax: +65 6571 2699 Phone +86 21 22181111 Fax: +55 19 2103 2862
www.boschsecurity.us www.boschsecurity.com [email protected] Fax: +86 21 22182398 [email protected]
www.boschsecurity.asia www.boschsecurity.com.cn www.boschsecurity.com

© Bosch Security Systems 2013 | Data subject to change without notice

1552995979 | en, V1, 04. Oct 2013