JVC UX-G48 Micro Component System
Uploaded by
desJVC UX-G48 Micro Component System
Uploaded by
desUX-G48[U].
book Page 1 Friday, July 13, 2007 5:01 PM
MICRO COMPONENT SYSTEM
UX-G48
Consists of CA-UXG48 and SP-UXG48
SUPER VIDEO
INSTRUCTIONS
GVT0226-006A
[US/UN/UB/UG/UX/UH/A/UW]
UX-G48[U].book Page 1 Friday, July 13, 2007 5:01 PM
Warnings, Cautions and Others
CAUTION
(Standby/on) button!
Disconnect the mains plug to shut the power off completely
(the STANDBY lamp goes off). When installing the apparatus,
ensure that the plug is easily accessible. The
(Standby/
on) button in any position does not disconnect the mains line.
When the System is on standby, the STANDBY lamp lights
red.
When the System is turned on, the STANDBY lamp goes off.
The power can be remote controlled.
CAUTION
To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover or cabinet. There are
no user serviceable parts inside the unit; leave all servicing
to qualified service personnel.
3. CAUTION: Visible and/or invisible class 1M laser radiation
when open. Do not view directly with optical instruments.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED
INSIDE THE UNIT.
CAUTION
Do not block the ventilation openings or holes. (If the
ventilation openings or holes are blocked by a newspaper
or cloth, etc., the heat may not be able to get out.)
Do not place any naked flame sources, such as lighted
candles, on the apparatus.
When discarding batteries, environmental problems must
be considered and local rules or laws governing the
disposal of these batteries must be followed strictly.
Do not expose this apparatus to rain, moisture, dripping or
splashing and that no objects filled with liquids, such as
vases, shall be placed on the apparatus.
G-1
UX-G48[U].book Page 2 Friday, July 13, 2007 5:01 PM
CAUTION:
Excessive sound pressure from earphones or headphones
can cause hearing loss.
[European Union only]
Caution: Proper Ventilation
To avoid risk of electric shock and fire, and to prevent
damage, locate the apparatus as follows:
1. Front: No obstructions and open spacing.
2. Sides/Top/ Back: No obstructions should be placed in the
areas shown by the dimensions below.
3. Bottom: Place on the level surface. Maintain an adequate
air path for ventilation by placing on a stand with a height
of 10 cm or more.
Front view
SP-UXG48 CA-UXG48
SP-UXG48
Side view
CA-UXG48
G-2
UX-G48[U].book Page 1 Friday, July 13, 2007 5:01 PM
Introduction
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete
understanding and to obtain the best possible performance from the System.
Precautions
Playable Disc/File Types
Installation
Install the System in a location with adequate ventilation to
prevent internal heat build-up in the System.
DO NOT install the System in a location near
heat sources, or in a place subject to direct
sunlight, excessive dust or vibration.
Install in a place which is level, dry and neither too hot nor
too coldbetween 5C and 35C.
Leave sufficient distance between the System and the TV.
Keep the speakers away from the TV to avoid interference
with the TV.
Power sources
When unplugging the System from the wall outlet, always
pull on the plug, not the power cord.
DO NOT handle the power cord with wet
hands.
Moisture condensation
Moisture may condense on the lenses inside the System in
the following cases:
After starting to heat the room
In a damp room
If the System is brought directly from a cold to a warm
place.
Should this occur, the System may malfunction. In this case,
leave the System turned on for a few hours until the moisture
evaporates, unplug the power cord, then plug it in again.
Internal heat
Make sure there is good ventilation around the System.
Poor ventilation could overheat and damage the System.
DO NOT block the ventilation openings or
holes. If they are blocked by a newspaper or
cloth, etc., the heat may not be able to get out.
Others
Should any metallic object or liquid fall into the System,
unplug the power cord and consult your dealer before
operating any further.
DO NOT disassemble the System since there
are no user serviceable parts inside.
If you are not going to operate the System for an extended
period of time, unplug the power cord from the wall outlet.
If anything goes wrong, unplug the power cord and consult
your dealer.
COMPACT
DIGITAL VIDEO
SUPER VIDEO
DIGITAL AUDIO
CD-R/-RW: Recorded in the Audio CD, Video CD, and
SVCD formats. MP3, WMA, WAV, JPEG, MPEG-1,
MPEG-2 and DivX files written in accordance with the
ISO 9660 format can also be played.
DVD-R/-RW, +R/+RW: Recorded in the DVD Video
format. MP3, WMA, WAV, JPEG, MPEG-1, MPEG-2
and DivX files written in the UDF-Bridge format can
also be played.
DVD-R/-RW: Recorded in the DVD Video Recording
(VR) format.
DVD-ROM: Recorded in the MP3, WMA, WAV,
JPEG, MPEG-1, MPEG-2 and DivX format.
USB mass storage class device: MP3, WMA, WAV,
JPEG, MPEG-1, MPEG-2 and DivX files.
In addition to the above discs/files, this System can play
back audio data recorded on CD-Extra.
The following discs cannot be played back:
DVD-RAM, CD-I (CD-I Ready), CD-ROM, Photo CD,
CD-G (CD-Graphics) and DVD/CD Text.
Playing back these discs will generate noise and damage
the speakers.
In this manual, file and track are used interchangeably
for MP3/WMA/WAV/JPEG/MPEG-1/MPEG-2/DivX
operations.
It is possible to play back finalized +R/+RW (DVD Video
format only) discs. DVD lights on the front display panel
when a +R/+RW disc is loaded.
DVD Logo is a trademark of DVD Format/Logo
Licensing Corporation.
About color system
This System accommodates both NTSC and PAL system
and can play back discs/files recorded in either system.
To change the color system, see page 15.
UX-G48[U].book Page 2 Friday, July 13, 2007 5:01 PM
Note on Region Code
DVD players and DVD Video have their own Region Code
numbers. This System can play back only DVD Video with
an appropriate Region Code number.
For details, see Specifications on page 39.
EX.: For Southeast Asia and Hong Kong region
Contents
Connections .............................................................. 3
Display Indicators.................................................... 6
Daily OperationsPlayback .................................. 7
Listening to the Radio ......................................................... 8
Playing Back a Disc/USB mass storage class device ......... 9
Playing Back a Digital Audio Player ................................ 12
Caution for DualDisc playback
The Non-DVD side of a DualDisc does not comply with
the Compact Disc Digital Audio standard. Therefore, the
use of the Non-DVD side of a DualDisc in this product may
not be recommended.
About multi-channel playback
When playing a multi-channel encoded software, the System
properly converts the multi-channel signals into 2 channels,
and emits the downmixed sound from the speakers. To enjoy
the powerful sound of these multi-channel encoded
software, connect a proper decoder or an amplifier with a
proper built-in decoder to the OPTICAL DIGITAL OUT
terminal on the rear.
How to Read This Manual
Button and control operations are explained in the table
below.
Some related tips and notes are explained later in the
sections Learning More about This System and
Troubleshooting, but not in the same section
explaining the operations ( INFO indicates that the
content has some information).
Indicates that you press the button briefly.
Daily OperationsSound & Other Adjustments ..... 13
Adjusting the Volume ....................................................... 13
Adjusting the Sound.......................................................... 13
Creating 3-Dimensional Sound Field3D Phonic........... 14
Using Headphone Surround .............................................. 14
Making Dialogues ClearClear Voice ............................ 14
Presetting Automatic DVD Sound Increase Level ........... 14
Changing the Display Brightness...................................... 14
Changing the Color System and Scanning Mode ............. 15
Changing the Picture Tone................................................ 15
Setting the Clock............................................................... 16
Turning Off the Power Automatically .............................. 16
Unique Video Disc/File Operations...................... 17
Selecting the Audio Track................................................. 17
Selecting the Subtitle Language........................................ 18
Selecting the View Angle ................................................. 18
Special Effect Playback .................................................... 19
Advanced Playback Operations ........................... 20
Programming the Playing OrderProgram Play ............. 20
Playing at RandomRandom Play .................................. 21
Playing Repeatedly ........................................................... 21
Prohibiting Disc EjectionChild Lock............................ 22
On-Screen Operations ........................................... 23
On-screen Bar Operations ................................................. 23
Operations on the Control Screen ..................................... 26
Daily Timer Operations ........................................ 28
Indicates that you press the button briefly and
repeatedly until the option you want is
selected.
Indicates that you press one of the buttons.
2 sec.
Indicates that you press and hold the button
for a specified period.
Indicates that you turn the control in the
specified direction(s).
Remote
ONLY
Main Unit
ONLY
Setup Menu Operations ........................................ 30
Additional Information ......................................... 32
Learning More about This System.................................... 32
Maintenance ...................................................................... 35
Troubleshooting ................................................................ 36
Language Code List .......................................................... 37
OPTICAL DIGITAL OUT Signals................................... 38
Operating JVCs TVs Using the Remote Control............. 38
Specifications .................................................................... 39
Parts Index ............................................................ 40
Indicates that this operation is only possible
using the remote control.
Indicates that this operation is only possible
using the main unit.
UX-G48[U].book Page 3 Friday, July 13, 2007 5:01 PM
Connections
Do not connect the power cord until all other
connections have been made.
Supplied accessories
Connect VIDEO OUT directly to the video input of your
TV. Connecting VIDEO OUT to a TV via a VCR may
interfere with your viewing when playing back copyprotected discs/files. Connecting VIDEO OUT to an
integrated TV/VCR system may also interfere with your
viewing.
Check to be sure that you have all the following items.
FM antenna (x1)
AM loop antenna (x1)
Composite video cord (x1)
Remote control (x1)
Batteries (x2)
AC plug adapter (x1) (not supplied for Australia,
Thailand, Hong Kong region and the Middle East)
If any items are missing, consult your dealer
immediately.
Rear panel
~ From AM/FM antenna
See page 4.
From the speakers
See page 4.
! From the digital input of digital audio component
See page 4.
From the powered subwoofer
See page 5.
@ From the input of TV/monitor
See page 5.
To a wall outlet
Plug in the power cord only after all connections
have been completed.
If the wall outlet does not match the AC plug, use the
supplied AC plug adapter (not supplied for
Australia, Thailand, Hong Kong region and the
Middle East).
Front panel
From the digital audio player
See page 5.
From the USB mass storage class device
See page 5.
From the headphones
See page 7.
UX-G48[U].book Page 4 Friday, July 13, 2007 5:01 PM
~ AM/FM antenna
Speakers
To assemble the AM loop antenna
When connecting the speaker cords, match the polarity of
the speaker terminals: red to (+) and black to ().
Press and hold
To connect AM/FM antenna
AM loop antenna (supplied)
Turn it until the best reception is obtained.
Insert
Release
If the cords are covered with vinyl, remove
the vinyl to expose the tip of the cord by
twisting the vinyl.
Red
From right
speaker
Black
From left
speaker
FM antenna (supplied)
Extend it so that you can obtain the
best reception.
For better FM reception
FM outdoor antenna
(not supplied)
DO NOT connect more than one speaker to
each terminal.
DO NOT push or pull the speakers as this
will damage the foot spacers at the bottom
of the speakers.
! Digital audio component
Protective cap
Disconnect the supplied FM antenna, and connect to an
outdoor FM antenna using a 75 wire with coaxial type
connector.
Optical digital
cord (not
supplied)
Set DIGITAL AUDIO OUTPUT in the AUDIO menu
correctly according to the connected digital audio
equipment (see page 31).
The digital signal through the OPTICAL DIGITAL OUT
terminal is transmitted only when DVD/CD is selected as
the source.
UX-G48[U].book Page 5 Friday, July 13, 2007 5:01 PM
To connect the powered subwoofer
From the powered subwoofer
(not supplied)
The connected subwoofer can reproduce the bass sounds
recorded in front left and right channels, but cannot
reproduce the LFE signals encoded in multi-channel
software.
Before plugging the System to the power supply, make sure
that the powered subwoofer is turned off.
You can connect a USB mass storage class device such as a
USB flash memory device, hard disk drive, multimedia card
reader, etc. to this System.
You cannot connect a computer to the USB MEMORY
terminal of the System.
When connecting a digital audio player
For listening to a digital audio player
On the front
panel
Stereo mini plug
(not supplied)
From audio output (or
headphone out, etc.)
For recording on a digital audio player
@ TV/monitor
Connect the COMPONENT jacks, S-VIDEO jack, or
VIDEO jack; whichever you want to use.
You can get better picture quality in the order of
Composite video ] S-Video ] Component video.
On the front
panel
Stereo mini plug
(not supplied)
From audio input
Green
Red
Blue
Component video
cord (not supplied)
This connection allows you to use the progressive scanning
mode. To select progressive scanning mode (see page 15),
use COMPONENT VIDEO OUT jacks.
Composite video cord
(supplied)
Do not connect the same digital audio player to both the
LINE IN and LINE OUT jacks at the same time; otherwise,
the sound will be distorted.
If an external device is not equipped with a stereo mini plug
audio output, use a plug adapter to convert the stereo mini
plug to the corresponding plug of the audio output.
By using QP Link (Quick Portable Link), you can easily
start playing back a digital audio player on this System. See
page 12 for details.
Preparing the remote control
S-Video cord
(not supplied)
After connecting a TV, select the appropriate video signal
output according to the connection method. See Changing
the Color System and Scanning Mode on page 15.
When connecting a USB mass storage class device
On the front
panel
USB cable
(not supplied)
When connecting with a USB cable, use the USB 2.0 cable
whose length is less than 1 m.
R6(SUM-3)/AA(15F)
If the range or effectiveness of the remote control decreases,
replace both batteries.
Caution
Do not expose batteries to heat or flame.
When using the remote control
Point the top of the remote control towards the remote sensor
as directly as possible. If you operate it from a diagonal
position, the operating range (approx. 5 m) may be shorter.
UX-G48[U].book Page 6 Friday, July 13, 2007 5:01 PM
Display Indicators
The indications on the display tell you a lot of things while you are operating the System.
Before operating the System, be familiar with when and how the indicators illuminate on the display.
12
34
er
1 HP SUR (Headphone Surround) indicator
Lights when Headphone Surround is activated.
2 USB indicator
Lights when USB MEM is selected as the source.
3 Disc format indicators
SVCD: lights when playing back an SVCD.
VCD: lights when playing back a VCD.
CD: lights when playing back a CD.
DVD: lights when playing back a DVD.
4 (Clear Voice) indicator
Lights when Clear Voice is activated.
5 Playback mode indicators
Repeat Mode indicators:
1 : lights when One Track/File/Chapter/Step
Repeat is activated.
: lights when One Group/Title/Program/Play List
Repeat is activated.
: lights when All Track/File/Title/Program
Repeat is activated.
RND: lights when Random Play is activated.
PRGM: lights when Program Play is activated.
6 Audio format indicators
MP3: lights when an MP3 file is detected.
WMA: lights when a WMA file is detected.
7 RESUME indicator
Lights when the System memorizes the position where
the playback is interrupted.
8 S.TURBO (Sound Turbo) indicator
Lights when Sound Turbo II is activated.
9 AHB indicator
Lights when AHB Pro (Active Hyper Bass Pro) is
activated.
67 8
9 p q
u i
p Radio band indicators
AM: lights when tuning in to an AM station.
FM: lights when tuning in to an FM station.
q FM reception indicators
ST (stereo): lights while an FM stereo station with
sufficient signal strength is tuned in.
MONO: lights while receiving an FM stereo station in
monaural.
w Daily Timer indicators
: lights when Daily Timer is on standby or is being
set; flashes while it is working.
1/2/3: lights when a Daily Timer (1, 2, or 3) is on
standby or is working; flashes while being set.
e 3D P. indicator
Lights when 3D Phonic is activated.
r QPL (QP Link) indicator
Lights when QP Link is activated.
t (Progressive) indicator
Lights when the progressive scanning mode is selected.
y Main display
While listening to the radio: band (or preset number)
and station frequency appear.
While LINE is selected: LINE appears.
While playing a disc or file: current status appears.
u A.STBY (Auto Standby) indicator
Lights when Auto Standby is activated.
Flashes when playback stops with Auto Standby
activated.
i SLEEP indicator
Lights when the Sleep Timer is activated.
UX-G48[U].book Page 7 Friday, July 13, 2007 5:01 PM
Daily OperationsPlayback
In this manual, operations using the remote control are
mainly explained; however, you can use the buttons
and controls on the main unit if they have the same (or
similar) name and marks.
Remote control
DIMMER
Number
buttons
RETURN
ENTER/SET
TOP MENU/PG
MENU/PL
, , ,
The STANDBY lamp on the main unit turns off.
Instead of pressing
AUDIO, the System is turned
on by pressing one of the source buttons.
When QP Link is activated, the System turns on and
automatically changes the source to LINE as the
source by starting playback on an external device.
(See page 12 for details.)
2 Select the source.
Playback automatically starts if the selected source is
ready.
You can change the display information by pressing
DISPLAY. For details, see page 16.
3 Adjust the volume.
To turn off (standby) the System
GROUP/TITLE
7
GROUP/TITLE SKIP
4,
FM/PLAY MODE
8
1,
QP LINK
DVD/LINE
LEVEL
SHIFT
The STANDBY lamp on the main unit lights
in red.
A small amount of power is always
consumed even while on standby.
You can reduce power consumption by turning off the
display. To turn off the display, select DISP OFF by
pressing DIMMER (while holding SHIFT) when on
standby.
To restore the display indication, select DISP ON by
pressing DIMMER (while holding SHIFT) again.
For private listening
Connect a pair of headphones to the PHONES jack on the
main unit. The sound will no longer come out of the
speakers. Be sure to turn down the volume before
connecting or putting on the headphones.
Disconnecting the headphones will activate the speakers
again.
2
DVD/CD
3
TV VOL
AUDIO VOL
1 Turn on the power.
USB
MEMORY
LINE
DO NOT turn off (standby) the System with the
volume set at an extremely high level;
otherwise, the sudden blast of sound may
damage your hearing, speakers and/or
headphones when you turn on the System or
start playback.
UX-G48[U].book Page 8 Friday, July 13, 2007 5:01 PM
To select the band (FM or AM)
How to select a number
DIMMER
SLEEP
A.STANDBY
3D P/HP S C.VOICE CLOCK/TIMER
4
ZOOM
ANGLE SCAN MODE
RETURN
CANCEL
VFP
10
10
Examples:
To select number 5, press 5.
To select number 10, press 10.
To select number 15, press 10, 1,
then 5.
To select number 30, press 10, 3,
then 0.
To select number 125, press 10,
10, 1, 2, then 5.
Listening to the Radio
FM
AM
To tune in to a station
While FM or AM is selected...
2 sec.
GROUP/TITLE SKIP
INFO
To select the AM tuner interval spacing
Main Unit
ONLY
Some countries space AM stations 9 kHz apart, and other
countries use 10 kHz spacing. Before operating the tuner,
select the appropriate AM tuner interval spacing used for
your area.
1 Select AM, then turn off (standby) the System.
FM
Frequency starts changing on the display.
When a station (frequency) with sufficient signal strength is
tuned in, the frequency stops changing.
When you repeatedly press the button, the frequency
changes step by step.
To manually stop the search, press either button.
If the FM reception is poor
Remote
ONLY
FM/PLAY
MODE
AM
2 Select the AM tuner interval spacing.
To select 9 kHz:
The MONO indicator lights on the display. Reception will
improve though stereo effect is lostMonaural reception.
To restore the stereo effect, press the button again (the
MONO indicator disappears).
If the beats are heard while listening to
AM station
FM/PLAY
MODE
(while holding...)
To select 10 kHz:
Remote
ONLY
BCUT ON
BCUT OFF
(Canceled)
If you change to another station, this setting is
automatically canceled.
(while holding...)
UX-G48[U].book Page 9 Friday, July 13, 2007 5:01 PM
To preset the stations
Remote
ONLY
You can preset 30 FM and 15 AM stations.
1 Tune in to a station you want to preset.
2
You can also store the monaural reception mode for
FM preset stations if it is selected.
Activate the preset number entry mode.
ENTER/SET
Finish the following process while the indication on the
display is flashing.
Select a preset number for the station you store.
To select a number, see How to
DIMMER
SLEEP A.STANDBY
3
1
2
select a number on page 8.
3D P/HP S C.VOICE CLOCK/TIMER
You can also use the or 1
6
4
5
button.
ZOOM
Playing Back a Disc/USB mass storage
class device INFO
IMPORTANT: Before playing a disc/file, make sure
of the following...
Turn on the TV and select an appropriate input mode on
the TV to view the pictures or on-screen displays.
For disc/file playback, you can change the initial setting
to your preference. See Setup Menu Operations on
page 30.
If
appears on the TV screen when you press a
button, the disc/file cannot perform the operation you
have tried to do.
To insert a disc
Main Unit
ONLY
ANGLE SCAN MODE
RETURN
CANCEL
VFP
10
10
When using an 8 cm disc, place it on the inner circle of the
disc tray.
To close the disc tray, press 0 again.
If you press DVD/CD 3, disc tray closes automatically
and playback starts (depending on how the disc is
programmed internally).
4 Store the station.
ENTER/SET
To connect a USB mass storage class device
To tune in to a preset station
Remote
ONLY
1 Select the band (FM or AM).
FM
AM
2 Select the preset number for the station you stored.
DIMMER
SLEEP
A.STANDBY
3D P/HP S C.VOICE CLOCK/TIMER
4
ZOOM
ANGLE SCAN MODE
RETURN
CANCEL
VFP
10
10
To select a number, see How to
select a number on page 8.
You can also use the or 1
button.
For connecting a USB mass storage class device, see
page 5.
Always set volume level to the minimum level when
connecting or disconnecting a USB mass storage class
device.
To disconnect a USB mass storage class device safely, turn
off the System before disconnecting it.
UX-G48[U].book Page 10 Friday, July 13, 2007 5:01 PM
To play back a disc/USB mass storage class
device
To start:
Disc
USB mass storage class device
DVD/CD
USB
MEMORY
On-screen guide icons
During playback, the following icons may appear on the
TV:
At the beginning of a scene containing
multi-angle views.
At the beginning of a scene containing
multi-audio sounds.
To pause:
To stop:
To release, press DVD/CD 3 or
USB MEMORY 3.
For MP3/WMA/WAV/JPEG/MPEG-1/MPEG-2/DivX
files:
If different types of playable files (audio/still picture/
moving picture) are recorded on a disc or USB mass
storage class device, select a file type to play (see FILE
TYPE in PICTURE menu on page 30).
When the System detects MP3/WMA/WAV/JPEG/
MPEG-1/MPEG-2/DivX files, the control screen appears
on the TV. (For still/moving picture files, it appears while
playback is stopped.) For details, see page 27.
The System can store the stop point, and when you start
playback again by pressing DVD/CD 3 or USB
MEMORY 3 (even while on standby), it starts from the
position where you have stoppedResume Play.
(RESUME indicator lights on the display when you stop
playback.)
To stop completely while Resume is activated, press 7
twice. (To cancel Resume, see RESUME in OTHERS
menu on page 31.)
.
At the beginning of a scene containing
multi-subtitles.
The following icons will also be shown on the TV to
indicate your current operation.
,
,
,
,
,
To deactivate the on-screen guide icon, see ON
SCREEN GUIDE in OTHERS menu on page 31.
To select a title/group
Remote
ONLY
While playing...
GROUP/TITLE SKIP
(while holding...)
You can select a title/group directly by pressing the
number buttons after pressing GROUP/TITLE (not
applicable for DVD-VR). To select a number, see How to
select a number on page 8.
10
UX-G48[U].book Page 11 Friday, July 13, 2007 5:01 PM
To select a chapter/track/file
To play back using the disc menu
For VCD/SVCD, cancel PBC (see the right column).
While playing...
When you press 4 for the
GROUP/TITLE SKIP
first time, you will go back to
the beginning of the current
chapter/track/file.
7 For DVD Video:
1 Show the disc menu.
TOP MENU/PG
MENU/PL
2 Select an item on the disc menu.
TV CH
Remote
ONLY
To locate a particular portion
This does not function for JPEG files.
While playing...
ENTER/SET
SLOW +
TV CH
x2
x5
x10
x20
x60
x2
x5
x10
x20
x60
For MP3/WMA/WAV/DivX files, the search speed and
indications on the TV are different from those above.
No sound comes out if searching is carried out while
showing the moving picture.
To return to normal playback, press DVD/CD 3 or USB
MEMORY 3 (depending on the current source).
For DivX/MPEG-1/MPEG-2 files, each time you press the
> or < button, you can skip to a scene by 30 seconds or
5 minutes depending on the files.
For some discs, you can also select items by entering the
number using the number buttons.
7 For SVCD/VCD with PBC:
While playing a disc with PBC, PBC appears on the
display.
When disc menu appears on the TV, select an item on the
menu. Playback of the selected item starts.
To select a number, see How to
DIMMER
SLEEP A.STANDBY
3
1
2
select a number on page 8.
3D P/HP S C.VOICE CLOCK/TIMER
4
ZOOM
To locate an item directly
3D P/HP S C.VOICE CLOCK/TIMER
ZOOM
ANGLE SCAN MODE
RETURN
CANCEL
VFP
10
10
Remote
ONLY
You can select a title/chapter/track/file directly and start
playback.
For DVD Video, you can select a title before starting
playback, while you can select a chapter after starting
playback.
To select a number, see How to
DIMMER
SLEEP A.STANDBY
3
1
2
select a number on page 8.
4
Remote
ONLY
To move to the next or previous page of the current
menu:
GROUP/TITLE SKIP
Moves to the next page.
Moves to the previous page.
To return to the previous menu:
ANGLE SCAN MODE
RETURN
RETURN
CANCEL
VFP
10
10
10
(while holding...)
To cancel PBC, press 7, then select a track by using the
number buttons (see page 8). Playback starts with the
selected track.
To reactivate PBC, press 7 (twice if Resume is turned
ON), then press DVD/CD 3.
11
UX-G48[U].book Page 12 Friday, July 13, 2007 5:01 PM
Playing Back a Digital Audio Player
INFO
While QP Link is playing the device...
For connecting a digital audio player, see page 5.
Bubbles appear when
QP Link is working.
To listen to digital audio player
You can listen to the digital audio player connected to the
LINE IN jack.
Make sure to turn down the volume on the System to
minimum level before starting playback.
Bubbles disappear
when the sound signal
stops or is too weak.
LINE
To record on a digital audio player
You can record the sound from the System to the digital
audio player connected to the LINE OUT jack.
Remote
To adjust the audio input level ONLY
If the sound from the device connected to the
LINE IN jack is too loud or too quiet, you can change the
audio input level through the LINE IN jack (without
changing the volume level).
While LINE is selected as a source...
DVD/LINE
LEVEL
IN_LVL1
IN_LVL2
It may be unlawful to record or play back copyrighted
material without the consent of the copyright owner.
1 Start recording on the digital audio player.
2 Start playing the disc, USB mass storage class device,
or tune in to the station you want to record.
DVD/CD
USB
MEMORY
IN_LVL3
(Initial setting)
As the number of the level increases, the input level is
increased.
To activate QP Link
Remote
ONLY
By using QP Link (Quick Portable Link), you can easily start
playing back a digital audio player connected to the LINE IN
jack.
Make sure to set the volume of your digital audio player
loud enough so that the System can detect the sound signal.
AHB PRO
QP LINK
QPL ON
(Initial setting)
QPL OFF
(Canceled)
When QP Link is activated, connecting a digital audio player
to the LINE IN jack and starting playback performs the
following:
While the System is turned on...
Changes the source to LINE automatically. (If you
change from LINE to another source, QP Link will be
canceled.)
While the System is on standby...
Turns on the System and automatically changes the source
to LINE, except when the display is turned off (see
page 7).
Before recording on a digital audio player, deactivate QP
Link or do not connect the digital audio player to the LINE
IN jack; otherwise, LINE will be selected as the source
and the recording will stop.
Sound adjustments (see pages 13 and 14) do not affect
recording on the digital audio player.
Remote
To adjust the audio output level ONLY
If the recorded sound on the digital audio player connected
to the LINE OUT jack is too loud or too quiet, you can
change the audio output level through the LINE OUT jack
(without changing the volume level).
While LINE is selected as a source...
3 sec.
DVD/LINE
LEVEL
OUT_LVL1
OUT_LVL2
(Initial setting)
As the number of the level increases, the output level is
increased.
12
UX-G48[U].book Page 13 Friday, July 13, 2007 5:01 PM
Daily OperationsSound & Other Adjustments
To drop the volume in a moment
Remote control
SLEEP
A.STANDBY
CLOCK/TIMER
SCAN MODE
VFP
DISPLAY
DIMMER
3D P/HP S
C.VOICE
CANCEL
, , ,
ENTER/SET
FADE
MUTING
Remote
ONLY
To restore the volume, press again, or
adjust the volume level.
Adjusting the Sound
INFO
To reinforce the heavy sound
This boosts the low and high frequency soundSound
Turbo II.
SOUND
TURBO
TURBO ON
AHB PRO
TURBOOFF
BASS/TREBLE
DVD/LINE
LEVEL
AUDIO VOL
+,
SHIFT
SOUND
TURBO
FADE
MUTING
Main unit
(Canceled)
When Sound Turbo II is turned on:
AHB Pro (see below) is automatically turned on, and
cannot be turned off. (The AHB indicator does not light
even though the function is turned on.)
The bass and treble level (see below) is set to +2.
To reinforce the bass sound
Remote
ONLY
While Sound Turbo II is off, the richness and fullness of the
bass sound is clearly maintained regardless of how you set
the volumeAHB Pro (Active Hyper Bass Pro).
AHB PRO
QP LINK
SOUND
TURBO
DIMMER
AHB ON
AHB OFF
(Canceled)
(while holding...)
VOLUME
+,
To adjust the tone
Remote
ONLY
You can adjust the bass and treble level from 3 to +3.
To adjust the bass
BASS/
TREBLE
Adjusting the Volume
You can adjust the volume level from VOL MIN to level 40
(VOL MAX).
Remote control:
Main unit:
BASS TREBLE
Canceled
TV VOL
AUDIO VOL
To adjust the treble
VOLUME
BASS/
TREBLE
BASS TREBLE
Canceled
TV VOL
AUDIO VOL
TV VOL
AUDIO VOL
13
UX-G48[U].book Page 14 Friday, July 13, 2007 5:01 PM
Creating 3-Dimensional Sound Field
3D Phonic
Remote
ONLY
This only functions while listening to disc/USB mass
storage class device.
This does not function for MPEG-1/MPEG-2/DivX files.
While playing...
3D P/HP S
ACTION
Making Dialogues ClearClear Voice
When you play back a disc or USB mass storage class
device, you can make the singers voices or dialogues of the
movie clearClear Voice. When Clear Voice is in use, the
(Clear Voice) indicator lights on the display.
This function works for multi-channel software which
contains a center channel signal and for 2-channel software
with 3D Phonic activated.
DRAMA
On
C.VOICE
3D OFF
Remote
ONLY
THEATER
Canceled
(Canceled)
(while holding...)
(while holding...)
ACTION
Suitable for action movies and sports
programs.
DRAMA
Creates natural and warm sound. Enjoy
movies in a relaxed mood.
THEATER Enjoy sound effects like in a major theater.
Using Headphone Surround
Remote
ONLY
You can enjoy a surround effect while listening through
headphones.
This only functions while listening to disc/USB mass
storage class device playback.
This does not function for MPEG-1/MPEG-2/DivX files.
While playing...
3D P/HP S
SURR ON
Presetting Automatic DVD Sound
Increase Level
Remote
ONLY
DVD sound is sometimes recorded at a lower level than
other discs and sources. You can set the increase level for the
currently loaded DVD, so you do not have to adjust the
volume when you change the source.
This only functions for DVD Video and DVD-VR.
DVD/LINE
LEVEL
NORMAL MIDDLE
HIGH
NORMAL
Original recording level.
MIDDLE
Output level is increased (less than HIGH).
HIGH
Output level is increased (more than
MIDDLE). (initial setting)
SURR OFF
(Canceled)
(while holding...)
If you plug in the headphones while 3D Phonic is in use,
Headphone Surround is turned on automatically.
When 3D Phonic is not in use and Headphone Surround is
turned on, unplugging the headphones turns 3D Phonic to
ACTION.
Changing the Display Brightness
You can dim the display window.
DIMMER
DIM OFF
DIM ON
(Canceled)
AUTO DIM
(while holding...)
DIM ON
Dims the display.
AUTO
DIM
Dims the display during playback of still/
moving pictures.
Dimmer is canceled when playback stops.
14
UX-G48[U].book Page 15 Friday, July 13, 2007 5:01 PM
2 Select a preset picture tone.
Changing the Color System and
INFO
Scanning Mode
Remote
ONLY
You can select the video output to match it to the color
system of your TV (NTSC or PAL).
If you connect a progressive TV through the
COMPONENT VIDEO OUT jacks, you can enjoy a high
quality picture by selecting progressive scanning mode.
Before playback...
SCAN MODE
PAL
PAL PRG
NTSC PRG
NTSC
NORMAL
CINEMA
USER2
USER1
NORMAL
Normally select this.
CINEMA
Suitable for a movie source.
USER1/USER2
You can adjust parameters and can
store the settings.
To clear the screen, press VFP again while holding SHIFT.
To adjust the picture tone
1 Select USER1 or USER2.
(while holding...)
ENTER/SET
Follow steps 1 and 2 explained in To select a preset
picture tone.
Select a parameter you want to adjust.
TV CH
ENTER/SET
PAL / NTSC
Select for a conventional PAL or NTSC
TV.
TV CH
PAL PRG /
NTSC PRG
Select for a PAL or NTSC progressive TV.
The
(Progressive) indicator lights on
the display.
GAMMA
Adjust if the neutral color is bright
or dark (3 to +3).
BRIGHTNESS
Adjust if the entire picture is bright
or dark (8 to +8).
CONTRAST
Adjust if the brightness ratio is
unnatural (7 to +7).
SATURATION
Adjust if the picture is whitish or
blackish (7 to +7).
TINT
Adjust if the human skin color is
unnatural (7 to +7).
SHARPNESS
Adjust if the picture is indistinct
(8 to +8).
Changing the Picture Tone
Remote
ONLY
While showing a playback picture on the TV, you can select
a preset picture tone, or adjust it and store your own
preference.
To select a preset picture tone
1 While playing, display VFP setting screen.
NORMAL
VFP
10
(while holding...)
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
3 Adjust the parameter.
TV CH
ENTER/SET
On the TV
TV CH
4 Repeat steps 2 and 3 to adjust other parameters.
To clear the screen, press VFP again while holding SHIFT.
15
UX-G48[U].book Page 16 Friday, July 13, 2007 5:01 PM
Setting the Clock
Remote
ONLY
INFO
Without setting the built-in clock, you cannot use Daily
Timers (see page 28).
To exit the clock settings, press CLOCK/TIMER (while
holding SHIFT) as required.
To correct a mis-entry during the process, press CANCEL
(while holding SHIFT). You can return to the previous
step.
Turning Off the Power Automatically
Remote
ONLY
Auto Standby
This only functions while playing a disc/USB mass storage
class device/digital audio player (with QP Link activated).
A.STANDBY
On
Canceled
1 Activate the clock setting mode.
(while holding...)
CLOCK/TIMER
(while holding...)
If you have already adjusted the clock before, press the
button repeatedly until the clock setting mode is
selected.
Adjust the hour, then the minute.
ENTER/SET
When Auto Standby is in use, the A.STBY indicator lights
on the display.
When the playback stops, the A.STBY indicator starts
flashing. If no operation is done for about 3 minutes while
the indicator is flashing, the System turns off (standby)
automatically.
Auto Standby works for DVD/CD, USB MEM and
LINE.
Changing the source to FM or AM temporarily
deactivates Auto Standby.
Sleep Timer
You can set the shut-off time so that you can go to bed
without turning off the System yourself.
1 Specify the time (in minutes).
SLEEP
2
Now the built-in clock starts working.
To check the current clock time during playback
Ex.: While playing a disc...
DISPLAY
Source information Disc/file type*
Title and chapter
Clock
number**
Only while playing back a disc or USB mass storage
class device.
** Only while playing back the following discs/files:
DVD-VR: Program number/Play List number and
chapter number.
MP3/WMA/WAV/JPEG/MPEG-1/MPEG-2/DivX files:
Group and file number.
DVD Video: Title and chapter number.
(while holding...)
10
20
30
60
90
120
150 180
Canceled
2 Wait until the set time disappears.
To check the time remaining until the shut-off time, press
SLEEP while holding SHIFT.
If you press the button repeatedly, you can change the shutoff time.
16
UX-G48[U].book Page 17 Friday, July 13, 2007 5:01 PM
Unique Video Disc/File Operations
Remote
ONLY
Selecting the Audio Track
Remote control
INFO
For DivX files/DVD Video: While playing back a chapter/
file containing several audio languages, you can select the
language to listen to.
For DVD-VR/SVCD/VCD: While playing back a track, you
can select the audio channel to listen to.
For DVD Video/DVD-VR/SVCD/VCD: You can also
select the audio track using the on-screen bar (see page 23).
ZOOM
ANGLE
, ,
AUDIO/MPX
,
While playing a DVD Video...
DVD/CD 3
8
SLOW ,
AUDIO/MPX
USB
MEMORY 3
Ex.:
1/3
ENGLISH
FRENCH
JAPANESE
SUBTITLE
1/3
SHIFT
3/3
2/3
2/3
ENGLISH
3/3
FRENCH
JAPANESE
While playing a DivX file...
Ex.:
2/3
1/3
1
3/3
While playing a DVD-VR or SVCD/VCD...
SVCD
AUDIO/MPX
ST1
R2
DVD-VR/VCD
ST
ST2
L2
L1
R1
ST1/ST2/ To listen to normal stereo
ST
(2-channel) playback.
L1/L2/L
To listen to the left audio channel.
R1/R2/R
To listen to the right audio channel.
SVCD can have 4 audio channels. SVCD usually uses
these 4 channels to record two 2-channel recordings (ST1/
ST2).
17
UX-G48[U].book Page 18 Friday, July 13, 2007 5:01 PM
Remote
ONLY
Selecting the Subtitle Language
For DivX files/DVD Video: While playing back a chapter/
file containing subtitles in different languages, you can
select the subtitle language to display on the TV.
For DVD-VR: While playing, you can turn the subtitles on
or off.
For SVCD: While playing, you can select the subtitles even
if no subtitles are recorded on the disc.
For DVD Video/DVD-VR/SVCD: You can also select the
subtitle language using the on-screen bar (see page 23).
Remote
ONLY
Selecting the View Angle
For DVD Video only: While playing back a chapter
containing multi-view angles, you can view the same scene
from different angles.
You can also select the multi-view angles using the onscreen bar (see page 23).
While playing...
ANGLE
While playing a DivX file/DVD Video...
(while holding...)
SUBTITLE
1/3
1/3
Ex.:
ENGLISH
ENGLISH
3/3
2/3
1/3
1
TV CH
1/3
1
2/3
2
3/3
3
TV CH
Ex.:
1/3
ENGLISH
1/3
ENGLISH
2/3
FRENCH
2/3
3/3
JAPANESE
3/3
FRENCH
JAPANESE
While playing a DVD-VR...
SUBTITLE
ON
ON
OFF
OFF
While playing an SVCD...
SUBTITLE
18
UX-G48[U].book Page 19 Friday, July 13, 2007 5:01 PM
Special Effect Playback
To replay the previous scenes
(One-Touch Replay)
INFO
Still picture playback
To display the still
picture:
To resume normal playback:
While playing...
Disc
USB mass storage
class device
DVD/CD
USB
MEMORY
Remote
ONLY
This function is only used while playing DVD Video/
DVD-VR.
While playing....
The playback position moves
back about 10 seconds before the
current position (only within the
same title).
Zoom
Remote
ONLY
1 While playing...
Remote
ONLY
Frame-by-frame playback
ZOOM
1 While playing...
Still picture playback starts.
(while holding...)
While playing a DVD Video/DVD-VR/SVCD/VCD
and MPEG-1/MPEG-2/DivX file:
2 Advance the still picture frame by frame.
ZOOM 1
ZOOM 2
ZOOM OFF
To resume normal playback, press DVD/CD 3 or USB
MEMORY 3 (depending on the current source).
ZOOM 3
ZOOM 6
While playing a JPEG file (not available during
slide-show):
ZOOM 1
Slow-motion playback
Remote
ONLY
This function is used only while playing DVD Video/
DVD-VR/SVCD/VCD.
ZOOM 4
ZOOM 5
ZOOM 2
ZOOM OFF
2 Move the zoomed-in position.
TV CH
1 While playing...
Still picture playback starts.
TV CH
2 Select slow motion speed.
SLOW +
Forward slow motion starts.
1/32
1/16
1/8
1/4
1/2
Reverse slow motion* starts.
1/32
1/16
1/8
1/4
* Only available for DVD Video.
To resume normal playback, press DVD/CD 3.
19
1/2
To cancel Zoom, press ZOOM (while holding SHIFT)
repeatedly until ZOOM OFF appears on the TV.
UX-G48[U].book Page 20 Friday, July 13, 2007 5:01 PM
Advanced Playback Operations
2 Select chapters/tracks/files you want for Program
Remote control
Number
buttons
CANCEL
,
DVD/CD 3
8
3
4
Play.
1 For DVD Video and MP3/WMA/WAV files: Select
a title or group number.
2 Select a chapter or track/file number.
To select a number, see How to select a number on
page 8.
Repeat step 2 until you complete your program.
Start playback.
Playback starts in the order
DVD/CD
you have programmed.
4,
FM/PLAY
MODE
REPEAT A-B
REPEAT
SHIFT
To skip:
To pause:
To stop:
GROUP/TITLE SKIP
Main unit
To release, press
DVD/CD 3.
DVD/CD #/8
4, 7,
To check the programmed contents
Before or after playback...
TV CH
In the reverse order.
TV CH
Programming the Playing Order
Program Play
Remote
ONLY
INFO
You can arrange the playing order of the chapters/tracks/
files (up to 99) before you start playback.
Program play cannot be used for the USB mass storage
class device, DVD-VR and JPEG/MPEG-1/MPEG-2/
DivX files on a disc.
Resume does not work for Program Play.
In the programmed order.
You can also use 4 or to check the programmed
contents.
1 Before starting playback, activate Program Play.
FM/PLAY
MODE
PROGRAM
RANDOM
Canceled
PROGRAM
On the display
No
1
2
3
4
5
6
7
8
9
10
Group/Title
Track/Chapter
On the TV
20
UX-G48[U].book Page 21 Friday, July 13, 2007 5:01 PM
To modify the program
To skip a chapter/
track:
Before or after playback...
To pause:
To stop:
To erase the last step:
To release, press
DVD/CD 3.
CANCEL
To exit Random Play
Before or after playback...
(while holding...)
To erase the entire program: To add another step in
the program:
2 sec.
FM/PLAY
MODE
Repeat step 2 on page 20.
PROGRAM
RANDOM
Canceled
CANCEL
Playing Repeatedly
To exit Program Play
Repeat Play
Before or after playback...
PROGRAM
RANDOM
Canceled
Playing at RandomRandom Play
1 Before starting playback, activate Random Play.
21
REPEAT A-B
REPEAT
REP CHAP *
REP TTL
REP OFF
(Canceled)
For CD/SVCD/VCD:
While playing (without PBC for SVCD/VCD) or before
playback...
REPEAT A-B
REPEAT
REP TRK*
REP ALL
REP OFF
PROGRAM
RANDOM
Canceled
2 Start playback.
DVD/CD
You can repeat playback.
For DVD Video:
While playing...
Remote
ONLY
You can play all chapters or tracks at random.
Random Play cannot be used for the USB mass storage
class device, DVD-VR and JPEG/MPEG-1/MPEG-2/
DivX files on a disc.
FM/PLAY
MODE
INFO
For DVD Video/DVD-VR/SVCD/VCD/CD: You can also
select the repeat mode using the on-screen bar (see pages
24 and 25).
(while holding...)
FM/PLAY
MODE
Remote
ONLY
Playback starts in random order.
Random Play ends when the
entire disc has been played.
(Canceled)
* See the next page.
UX-G48[U].book Page 22 Friday, July 13, 2007 5:01 PM
For DVD-VR:
While playing an Original Program...
REPEAT A-B
REPEAT
A-B Repeat
REP CHAP
REP PG
REP OFF
REP ALL
(Canceled)
1 While playing (without PBC for SVCD/VCD), select
the start point (A).
While playing a Play List...
REPEAT A-B
REPEAT
You can repeat playback of a desired portion by specifying
the beginning (point A) and the ending (point B).
A-B Repeat cannot be used for MP3/WMA/WAV/JPEG/
MPEG-1/MPEG-2/DivX files and some DVDs.
REP CHAP
REPEAT A-B
REPEAT
REP PL
REP OFF
(Canceled)
For MPEG-1/MPEG-2/DivX/MP3/WMA/WAV files:
While playing or before playback...
REPEAT A-B
REPEAT
REP TRK*
REP GRP
REP OFF
REP ALL
(Canceled)
(while holding...)
2 Select the end point (B).
REPEAT A-B
REPEAT
For JPEG files during slide-show:
While playing or before playback...
REPEAT A-B
REPEAT
REP GRP
REP ALL
REP OFF
(Canceled)
REP CHAP* Repeats the current chapter.
REP TTL
starts flashing on the
display.
A
appears on the
TV if the TV is turned on.
(while holding...)
stops flashing.
A-B appears on the
TV.
You can search for the
end point using the
button.
To cancel A-B Repeat, press REPEAT A-B again while
holding SHIFT.
A-B Repeat will also be canceled when you stop play or
skip the chapter or track.
Repeats the current title.
REP TRK* Repeats the current track/file.
REP GRP
Repeats the current group.
REP PG
Repeats the current program.
REP PL
Repeats the current Play List.
REP ALL
Repeats all the contents or programmed
tracks/files.
Prohibiting Disc EjectionChild Lock
Main Unit
ONLY
You can lock the disc tray so that no one can eject the loaded
disc.
This function is available only while the System is on
standby.
While the disc tray is closed...
* During Program Play and Random Play, REP STEP
appears instead of these indications, and the repeat mode
changes as follows for all discs.
REP STEP
REP ALL
REP OFF
(Canceled)
(while holding...)
To cancel the prohibition, repeat the same procedure.
UNLOCKED appears on the display.
22
UX-G48[U].book Page 23 Friday, July 13, 2007 5:01 PM
On-Screen Operations
VCD
Remote control
VCD
TIME
TIME
2
PROGRAM
TIME 1:25:58
0:00:58
TRACK
233 TOTAL
TITLE 14 CHAP
1/3
1/3
ST
OFF
OFF
3
1/3
Number
buttons
CD
TOP MENU/PG
, , ,
MENU/PL
ENTER/SET
USB MEMORY 3
DVD/CD 3
ON SCREEN
CD
TIME
TIME
2
RANDOM
OFF
OFF
TIME 1:25:58
0:00:58
TRACK
233 TOTAL
TITLE 14 CHAP
1/3
1/3
1/3
4
MPEG-1/MPEG-2/DivX files on a disc
1
FILE
Time 1:25:58
00:00:58
CHAP 23 TOTAL
MPEG-1/MPEG-2/DivX files in a USB mass storage class
device
1
USB
On-screen Bar Operations
Remote
ONLY
INFO
You can check the source information (disc/USB mass
storage class device) and playback status by using the onscreen bar (not applicable for MP3/WMA/WAV/JPEG
files). You can also use some functions when playing back
DVD Video/DVD-VR/SVCD/VCD/CD.
On-screen Bar Information
DVD Video
Dolby D
DVD-VIDEO 3/2.1ch
TIME
TIME
OFF
OFF
TIME 1:25:58
0:00:58
CHAP233 TOTAL
TITLE
TITLE
14 2CHAP
1/3
1/3
CHAP.
1/3
1/3
1/3
1/1
4
DVD-VR
SVCD
1
SVCD
TIME
TIME
2
PROGRAM
23
TIME 1:25:58
0:00:58
TRACK
233 TOTAL
TITLE 14 CHAP
1/3
ST1
OFF
OFF
1/3
-/4
1/3
1/3
Time 1:25:58
00:00:58
CHAP 23 TOTAL
1 Disc/source type
2 Playback information
Dolby D
Audio format
3/2.1ch, 2/0.0 ch Channel number
PROGRAM,
RANDOM
Current play mode
TITLE 2
Current title
Current chapter
CHAP 3
TRACK 14
Current track
Current program
Current Play List
Time indications
TIME 0:00:58
3 Operation modes
Playback
/
Forward/Reverse search
/
Forward/Reverse slow-motion
Pause
Stop
4 Function icons (on the pull-down menu)
TIME
Select to change the time indication.
Select to repeat playback.
OFF
Select for time search.
CHAP.
Select for chapter search.
Select to change the audio language or
1/3
channel (see also page 17).
Select to change subtitle language
1/3
(see also page 18).
Select to change the view angle (see
1/3
also page 18).
UX-G48[U].book Page 24 Friday, July 13, 2007 5:01 PM
To operate using the On-screen Bar
To change the time information
Ex.: Selecting a subtitle (French) for DVD Video
While DVD/CD is selected as the source...
You can change the time information on the on-screen bar
and the display window on the main unit.
1 Display the entire on-screen bar.
1 While playing, display the entire on-screen bar.
Dolby D
DVD-VIDEO 3/2.1ch
TIME
OFF
TIME
OFF
ON SCREEN
DVD-VIDEO
Dolby D
3/2.1ch
TITLE 2 CHAP 3 TIME 0:00:58
*
Dolby D
DVD-VIDEO 3/2.1ch
TIME
OFF
TIME
OFF
TIME 1:25:58
0:00:58
CHAP233 TOTAL
TITLE
TITLE
14 2CHAP
CHAP.
1/3
1/3
1/1/3
3
1/3
1/1
1/3
1/3
1/3
1/3
1/3
1/1
2 Make sure TIME is selected (highlighted).
3 Change the time indication.
ENTER/SET
disappears
TIME 1:25:58
0:00:58
CHAP233 TOTAL
TITLE
TITLE
14 2CHAP
CHAP.
TIME
* This does not appear for MPEG-1/MPEG-2/DivX files.
0:00:58
T. REM 0:35:24
REM
0:11:23
TOTAL 1:01:58
2 Select (highlight) the item you want.
Dolby D
DVD-VIDEO 3/2.1ch
TIME
OFF
TIME
OFF
Elapsed playing time of the current
chapter/track (not applicable for DVDVR).
REM
Remaining time of the current chapter/
track (not applicable for DVD-VR).
TOTAL
Elapsed disc time.
T. REM
Remaining time of title (DVD Video)/
program (DVD VR)/disc (SVCD/
VCD).
TIME 1:25:58
0:00:58
CHAP233 TOTAL
TITLE
TITLE
14 2CHAP
1/3
1/3
CHAP.
1/3
1/3
1/3
1/1
3 Display the pop-up window.
ENTER/SET
TIME
TOTAL 1:25:58
1:01:58
CHAP233 TOTAL
TITLE 2CHAP
1/3
1/3
1/3
1/3
1/3
1/1
ENGLISH
To remove the on-screen bar
ON SCREEN
4 Select the desired option in the pop-up window.
TV CH
TOTAL 1:25:58
1:01:58
CHAP233 TOTAL
TITLE
TITLE
14 2CHAP
1/3
1/3
TV CH
1/3
2/3
1/3
1/1
FRENCH
See also page 21.
1 While playing (without PBC for SVCD/VCD), display
5 Finish the setting.
ENTER/SET
Repeat Play
Pop-up window disappears.
the entire on-screen bar.
Repeat mode can also be selected before starting
playback (not applicable for DVD Video/DVD-VR).
Select
OFF .
2
3 Display the pop-up window.
To remove the on-screen bar
ON SCREEN
DVD-VIDEO
TIME
TIME
Dolby D
3/2.1ch
OFF
OFF
TOTAL 1:25:58
1:01:58
CHAP233 TOTAL
TITLE
TITLE
14 2CHAP
CHAP.
1/3
1/3
1/3
1/3
1/3
1/1
OFF
Continued on the next page.
24
UX-G48[U].book Page 25 Friday, July 13, 2007 5:01 PM
4 Select the repeat mode you want.
Time Search
A-B
TITLE*
ALL
Repeats a desired portion (see below).
Repeats the current title.
Repeats the disc (not applicable for
DVD) or programmed track.
CHAPTER** Repeats the current chapter.
TRACK** Repeats the current track.
OFF
Cancels Repeat Play.
* While playing a DVD-VR, PG appears, and while
playing a Play List, PL appears.
** During Program Play and Random Play, STEP
appears.
Finish the setting.
You can move to a particular point by specifying the elapsed
playing time from the beginning.
This function is not available during Program Play and
Random Play.
1 While playing (without PBC for SVCD/VCD), display
the entire on-screen bar.
Time Search can also be used before starting playback
(not applicable for DVD Video/DVD-VR).
Select
.
2
3 Display the pop-up window.
Dolby D
TIME 1:25:58
0:00:58
CHAP233 TOTAL
TITLE
TITLE
14 2CHAP
DVD-VIDEO 3/2.1ch
TIME
OFF
TIME
OFF
ENTER/SET
1/3
1/3
CHAP.
1/3
1/3
1/3
1/1
TIME _ : _ _ : _ _
4 Enter the time.
You can specify the time in hours/minutes/seconds.
A-B Repeat
See also page 22.
DIMMER
SLEEP
A.STANDBY
3D P/HP S C.VOICE CLOCK/TIMER
1 While playing, display the entire on-screen bar.
2 Select OFF .
3 Display the pop-up window.
Dolby D
3/2.1ch
DVD-VIDEO
TIME
TIME
OFF
OFF
ZOOM
1/3
1/3
1/3
1/3
1/3
1/1
OFF
4 Select A-B.
TV CH
DVD-VIDEO
TIME
TIME
TV CH
Dolby D
3/2.1ch
OFF
OFF
5 Select the start point (A).
Dolby D
DVD-VIDEO 3/2.1ch
TIME
TIME
A-
TITLE
TITLE
14 2CHC
CHAP.
1/3
1/3
6 Select the end point (B).
ENTER/SET
A-B Repeat starts. The selected
portion plays repeatedly.
Before pressing ENTER/SET, you
can search for the end point using
the button.
To cancel A-B Repeat, repeat steps 1 to 3, and select OFF
in step 4.
25
6
9
To move to a point of 54
(minutes): 00 (seconds), press
0, 5, 4, 0, then 0.
It is always required to enter the hour digit (even 0
hours), but it is not required to enter the final zeros (the
last two digits in the examples above).
To correct a mis-entry, press < to erase the last entry.
Confirm your entry.
ENTER/SET
CHAP.
AB
ENTER/SET
8
CANCEL
TOTAL 1:25:58
1:01:58
CHAP233 TOTAL
TITLE
TITLE
14 2CHAP
CHAP.
ANGLE SCAN MODE
Examples:
To move to a point of 1
(hours): 02 (minutes): 00
(seconds), press 1, 0, 2, 0, then
0.
The System starts playing the disc
from the selected playing time.
UX-G48[U].book Page 26 Friday, July 13, 2007 5:01 PM
Chapter Search
Ex.: When Original Program is selected.
For DVD Video/DVD-VR: You can search for the chapter
number to play.
This function is not available during Program Play and
Random Play.
ORIGINAL PROGRAM
No
1
2
3
4
5
6
1 While playing, display the entire on-screen bar.
2 Select CHAP. .
3 Display the pop-up window.
Dolby D
3/2.1ch
DVD-VIDEO
TIME
TIME
1 2
TOTAL 1:25:58
1:01:58
CHAP233 TOTAL
TITLE
TITLE
14 2CHAP
OFF
1/3
1/3
CHAP.
CHAPTER
1/3
1/3
1/3
1/1
SLEEP
A.STANDBY
3D P/HP S C.VOICE CLOCK/TIMER
4
ZOOM
ANGLE SCAN MODE
CANCEL
Time
12:15
23:05
08:17
07:47
19:38
14:20
Title
La fleur
The last struggle
free flyer
BOOM!
Mr. Lawrence
Satisfy U
PLAY LIST
Examples:
To select chapter 5, press 5.
To select chapter 10, press 1,
then 0.
To select chapter 15, press 1,
then 5.
To select chapter 30, press 3,
then 0.
To correct a mis-entry, press the number buttons until
the desired number is shown in the pop-up window.
Confirm your entry.
ENTER/SET
Ch
L
L
L
L
L
L
Ex.: When Play List is selected.
4 Enter the desired chapter number.
DIMMER
Date
03/12/06
09/12/06
18/12/06
20/12/06
25/12/06
28/12/06
The System starts playing the selected
chapter.
No
1
2
3
4
Date
03/12/06
15/12/06
24/12/06
27/12/06
1 2
1
2
3
4
5
6
7
8
Chap
002
004
013
017
Length
0:23:24
1:04:39
0:41:26
0:09:08
Title
Nebula G.
CDJ
Secret Garden
S. Walker
Listed number
Recording/creating date
Recording channels
Recording time
Title
Highlight bar (current selection)
Chapters included
Playback time
To select an item in the list and start playback
Operations on the Control Screen
Remote
ONLY
You can search for and play the desired items through the
control screen for DVD-VR and MP3/WMA/WAV/JPEG/
MPEG-1/MPEG-2/DivX files.
Control screen for DVD-VR
The control screen is superimposed onto the TV screen when
you call up Original Program (PG) or Play List (PL).
TV CH
ENTER/SET
TV CH
If you move the highlight bar while playing back, the
selected item starts playback automatically.
To select playback type
To display the Original
Program:
TOP MENU/PG
To display the Play List:
MENU/PL
To remove the list, press the same button again.
26
UX-G48[U].book Page 27 Friday, July 13, 2007 5:01 PM
Control screen for MP3/WMA/WAV/JPEG/MPEG1/MPEG-2/DivX files
The control screen automatically appears on the TV screen
when the System detects MP3/WMA/WAV/JPEG/MPEG1/MPEG-2/DivX files on the loaded disc or connected USB
mass storage class device.
For still/moving picture, it appears when playback is
stopped.
RANDOM
2
3
4
5
Group : 2 / 3
Spring
Summer
Fall
Winter
Track Information
Title
Rain
Artist
Album
REPEAT STEP
TIME : 00:00:14
Track : 6 / 14 (Total 41)
Cloudy.mp3
Fair.mp3
Fog.mp3
Hail.mp3
Indian summer.mp3
Rain.mp3
Shower.mp3
Snow.mp3
Thunder.mp3
Typhoon.mp3
Wind.mp3
Winter sky.mp3
Moves the bar to the file list.
Moves the bar to the group
list.
To select an item in the list
TV CH
Ex.: While playing an MP3 file on a disc.
To move the highlight bar between group list and file list
7
8
9
0
-
TV CH
To start playback
=
~
For JPEG:
ENTER/SET
6
1 Current source
FILE: Current source is DVD/CD.
USB: Current source is USB MEM.
2 Current group number/total group number
3 Current group
4 Group list
5 File information (only for MP3/WMA/WAV files)
6 Current file
7 Random Play/Program Play setting (not applicable for
the files in the USB mass storage class device)
8 Repeat Play setting
9 Elapsed playing time of the current file (not applicable
for JPEG files)
0 Operation mode icon
- Current file number/total number of files in the current
group (total number of files on the loaded disc/USB
mass storage class device)
= Highlight bar (current selection)
~ File list
If different types of playable files (audio/still picture/
moving picture) are recorded on a disc or USB mass
storage class device, select a file type to play (see FILE
TYPE in PICTURE menu on page 30).
27
Move the highlight bar to the
desired item.
If you move the highlight bar
while playing back an MP3/
WMA/WAV file, the selected
track starts playback
automatically.
Disc
DVD/CD
USB mass storage
class device
USB
MEMORY
The selected file (still picture) is
displayed until you change it.
Press one of the buttons
depending on the current source.
Slide-show playback starts.
Each file (still picture) is shown
on the screen for about
3 seconds, then changes one
after another.
To cancel slide-show and
display the current still picture,
press 8.
For the other files:
ENTER/SET
Playback starts with the selected
file.
Pressing DVD/CD 3 or USB
MEMORY 3 also starts
playback.
Once you start to play back a picture, the control screen
disappears. To show the control screen, press TOP MENU/
PG or MENU/PL.
UX-G48[U].book Page 28 Friday, July 13, 2007 5:01 PM
Daily Timer Operations
1 Select one of the timer setting modes you want to set
DAILY 1 ON time, DAILY 2 ON time, or DAILY 3
ON time.
Remote control
CLOCK/TIMER
6
AUDIO
CLOCK/TIMER
(while holding...)
CANCEL
Daily Timer 1
Daily Timer 2
Daily Timer 3
DAILY 1 ON (Time) DAILY 2 ON (Time) DAILY 3 ON (Time)
Canceled
Clock setting
ENTER/SET
,
(see page 16)
Ex. When Daily Timer 1 setting mode is selected
SHIFT
Setting the Daily Timer
Remote
ONLY
When the clock has not been set, pressing CLOCK/
TIMER (while holding SHIFT) makes the System enter
the clock setting mode (see page 16).
Set the timer as you like.
Repeat the procedure for the following settings until
finished.
ENTER/SET
INFO
Using Daily Timer, you can wake up with your favorite
music.
You can store three Daily Timer settings; however, you can
activate only one of the timers at any one time.
To exit the timer settings, press CLOCK/TIMER (while
holding SHIFT) as required.
To correct a mis-entry during process, press CANCEL
(while holding SHIFT). You can go back to the previous
step.
Initial Daily Timer settings when shipped from the
factory:
DAILY 1: ON Time (6:00)/OFF Time (8:00)/Source
(TUNER FM 1)/Volume level ( )
DAILY 2: ON Time (7:00)/OFF Time (9:00)/Source
(TUNER FM 1)/Volume level ( )
DAILY 3: ON Time (10:00)/OFF Time (12:00)/Source
(TUNER FM 1)/Volume level ( )
1 Set the hour then the minute for on-time.
2 Set the hour then the minute for off-time.
3 Select the playback sourceTUNER FM,
TUNER AM, DISC, LINE, or USB MEM.
4 For TUNER FM and TUNER AM: Select a
preset channel.
For DISC: Select the title/group number, then
the chapter/track/file number.
For USB MEM: Select the group number, then
the track/file number.
5 Select the volume level.
You can adjust the volume level (1 to 40
and VOL ).
If you select VOL , the volume is set to the
same level as when the System was last turned off.
Once settings are completed, the timer setting
information appears in sequence.
Continued on the next page.
28
UX-G48[U].book Page 29 Friday, July 13, 2007 5:01 PM
3 Turn off the System (on standby), if you have set the
timer with the System turned on.
To turn on or off the Daily Timer
Since Daily Timer is activated at the same time everyday,
you may need to cancel it on some particular days.
To cancel the Daily Timer
1 Select the Timer (DAILY 1, DAILY 2, or DAILY 3)
you want to cancel.
CLOCK/TIMER
How Daily Timer works
Once the Daily Timer has been set, the timer indicator
(
) and timer number indicator (1/2/3) are lit on the
display. Daily Timer is activated at the same time
everyday until the timer is turned off manually (see the
next column) or another timer is activated.
When the on-time comes
The System turns on, tunes in to the specified station or
starts playing from the specified source, and gradually
increases the volume level to the preset level after for 30
seconds.
While Daily Timer is working, the timer indicator (
)
flashes on the display.
When the off-time comes
The System stops playback, and turns off (on standby)
automatically.
The timer setting remains in memory until you change
it.
(while holding...)
Daily Timer 1
Daily Timer 2
Daily Timer 3
DAILY 1 ON (Time) DAILY 2 ON (Time) DAILY 3 ON (Time)
Canceled
Clock setting
(see page 16)
Ex. To cancel Daily
Timer 1
2 Turn off the selected Timer.
CANCEL
(while holding...)
To turn on the Daily Timer
1 Select the Timer (DAILY 1, DAILY 2, or DAILY 3)
you want to activate.
CLOCK/TIMER
(while holding...)
Daily Timer 1
Daily Timer 2
Daily Timer 3
DAILY 1 ON (Time) DAILY 2 ON (Time) DAILY 3 ON (Time)
Canceled
Clock setting
(see page 16)
2 Activate the selected Timer.
ENTER/SET
Ex. When Daily Timer 1 (DAILY 1) is
activated
3 Wait until the indication disappears.
29
UX-G48[U].book Page 30 Friday, July 13, 2007 5:01 PM
Setup Menu Operations
Initial settings
Remote Control
INFO
Remote
ONLY
You can change the settings of the System.
The Setup Menu can be used only when DVD/CD or
USB MEM is selected as the source.
1 Press SET UP while playback is stopped.
LANGUAGE
, , ,
SET UP
MENU LANGUAGE
ENGLISH
AUDIO LANGUAGE
ENGLISH
SUBTITLE
ENGLISH
ON SCREEN LANGUAGE
ENGLISH
ENTER/SET
2
3
4
5
Press (or
)to select the menu.
Press
(or ) to move to select the item.
Press ENTER/SET.
Press
(or ) to select the options, then press
ENTER/SET.
To remove a preference display
Press SET UP.
LANGUAGE menu
Item
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ON SCREEN LANGUAGE
Contents
You can select the initial menu language for DivX files/DVD Video. (See page 37.)
You can select the initial audio language for DivX files/DVD Video. (See page 37.)
You can select the initial subtitle language for DivX files/DVD Video. (See page 37.)
You can select ENGLISH, CHINESE, or SPANISH as the on-screen language.
PICTURE menu
Item
MONITOR TYPE
16:9
4:3 LB
4:3 PS
PICTURE SOURCE
SCREEN SAVER
FILE TYPE
Contents
You can select the monitor type to match your TV when you play back picture recorded for widescreen televisions.
16:9 NORMAL/16:9 MULTI NORMAL (Wide-screen television): Select this when the aspect ratio
of your wide-screen TV is fixed to 16:9.
16:9 AUTO/16:9 MULTI AUTO (Wide-screen television): Select this when your TV is an ordinary
wide-screen TV.
4:3 LB/4:3 MULTI LB (Letter Box conversion): For a conventional (4:3) TV. Displays a widescreen picture to fit the width of the TV screen keeping the aspect ratio.
4:3 PS/4:3 MULTI PS (Pan Scan conversion): For a conventional (4:3) TV. The picture is zoomed
in to fill the screen vertically and the left and right sides of the picture are cut off.
For multi-color system TVs, select the MULTI option.
You can obtain optimal picture quality by selecting the source type of the video source.
AUTO: Normally, select this option. The System recognizes the picture type (film or video source) of
the current picture according to its information.
FILM: For a film source picture.
VIDEO: For a video source picture.
You can set the screen saver function (ON or OFF). If no operation is done for about 5 minutes, the
TV screen dims.
You can select the file type to play.
AUDIO: To play MP3/WMA/WAV files.
STILL PICTURE: To play JPEG files.
VIDEO: To play MPEG-1/MPEG-2/DivX files.
30
UX-G48[U].book Page 31 Friday, July 13, 2007 5:01 PM
AUDIO menu
Item
Contents
DIGITAL AUDIO OUTPUT
Set this item correctly when using the OPTICAL DIGITAL OUT terminal on the rear.
PCM ONLY: When connecting to audio equipment which is compatible with only linear PCM
signals.
DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or an amplifier with a builtin Dolby Digital decoder.
STREAM/PCM: When connecting to a DTS decoder or an amplifier with a built-in DTS decoder.
DOWN MIX
This setting is effective for digital audio output if DIGITAL AUDIO OUTPUT is set to PCM
ONLY.
DOLBY SURROUND: Select this when connecting to a surround decoder.
STEREO: Select this when connecting to a stereo receiver, MD player, etc.
D. RANGE COMPRESSION
You can enjoy powerful audio even at a low volume level while playing Dolby Digital software.
AUTO: You can enjoy powerful playback sound with full dynamic range.
ON: Select this when you want to fully apply the compression effect to make the sound at lower
volume clear (useful at midnight).
OTHERS menu
Item
Contents
RESUME
You can select Resume.
ON: The System resumes playback from the position where playback has been stopped.
OFF: Resume is deactivated.
ON SCREEN GUIDE
Activate (ON) or deactivate (OFF) the on-screen guide.
DivX REGISTRATION
The System has its own Registration Code.
If necessary, you can confirm it.
Once you have played back a DivX file in which the Registration Code is recorded, the Systems
Registration Code is overwritten for copyright protection.
31
UX-G48[U].book Page 32 Friday, July 13, 2007 5:01 PM
Additional Information
Learning More about This System
Connections (see pages 3 to 5)
Make sure the antenna conductors do not touch any other
terminals, connecting cords or the power cord. Also, keep
the antennas away from metallic parts of the System,
connecting cords, and the power cord. These could cause
poor reception.
Use only speakers with the same speaker impedance as
indicated by the speaker terminals on the rear of the
System.
The speakers are magnetically shielded to avoid color
distortions on TVs. However, if not installed properly, it
may cause color distortions. So, pay attention to the
following when installing the speakers.
When placing the speakers near a TV set, turn off the
TVs main power switch or unplug it before installing the
speakers.
Then wait at least 30 minutes before turning on the TVs
main power switch again.
Some TVs may still be affected even though you have
followed the above instructions. If this happens, move
the speakers away from the TV.
Daily OperationsPlayback (see pages 7 to 12)
Listening to the Radio:
If you store a new station into an occupied preset number,
the previously stored station in that number will be erased.
When you unplug the power cord or if a power failure
occurs, the preset stations will be erased in a few days. If
this happens, preset the stations again.
Playing Back a Disc/USB mass storage class device:
When you change the source to DVD/CD or USB
MEM, it may take a while to activate the source.
While the System is reading a disc, the source may not
change to USB MEM properly. In this case, press 7, then
reselect USB MEM as the source.
On some discs, the actual operations may be different from
what is explained in this manual due to the programming
and disc structure; such differences are not a malfunction
of this System.
The System recognizes up to 150 tracks (files) per group,
and 99 groups per disc/USB mass storage class device. The
total number of tracks (files) that the System can detect is
4000.
If there are any unplayable files in a folder, those files are
also counted in the total file number.
Playable files which do not belong to any groups are
handled as GROUP 1.
For playback of files in the USB mass storage class
device...
When connecting a USB mass storage class device, refer
also to its manual.
Connect one USB mass storage class device to the
System at a time. Do not use a USB hub.
You cannot charge any USB mass storage class device
through the USB MEMORY
terminal.
While playing back a file in a USB mass storage class
device, do not disconnect the device. It may cause
malfunction on both the System and the device.
JVC bears no responsibility for any loss of data in the
USB mass storage class device while using this System.
This System is compatible with USB 2.0 Full Speed.
You can play back the following types of files in a USB
mass storage class device (maximum data transfer rate:
2 Mbps):
Music: MP3, WMA, WAV
Picture: JPEG
Movie: MPEG-1, MPEG-2, DivX (maximum frame
rate of 30 fps for progressive)
This System may not play back some files even though
their formats are listed above.
You cannot play back a file larger than 2 Gigabytes.
When playing a file of a large transfer rate, frames or
sounds may be dropped during playback.
This System cannot recognize a USB mass storage class
device whose rating is other than 5 V and does not
exceed 500 mA.
This System may not play back some USB mass storage
class devices and does not support DRM (Digital Rights
Management).
It will take some time to start up a digital audio player
whose contents are larger than 1 Gigabyte.
32
UX-G48[U].book Page 33 Friday, July 13, 2007 5:01 PM
For DVD-VR playback...
This System can play only a disc of UDF-Bridge format.
For details about DVD-VR format and Play List, refer to
the manual of the recording equipment.
For MP3/WMA/WAV playback...
MP3/WMA/WAV discs require a longer readout time
than regular CDs. (It depends on the complexity of the
group/file configuration.)
Some MP3/WMA/WAV files cannot be played back and
will be skipped. This results from their recording
processes and conditions.
This System can play only a disc of ISO 9660 Level 1 or
Level 2.
This System can play back MP3/WMA/WAV files with
the extension code <.mp3>, <.wma>, or <.wav>
(regardless of the letter caseupper/lower).
It is recommended that you make each MP3/WMA/
WAV files as following conditions:
For MP3/WMA files: At a sample rate of 44.1 kHz and
at a data transfer rate of 128 kbps. This System cannot
play back files made at a bit rate of less than 64 kbps.
For WAV files: At a sample rate of 44.1 kHz and at a
quantization rate of 16 bit Linear PCM.
For JPEG files playback...
It is recommended that you record a file at 640 x 480
resolution. (If a file has been recorded at a resolution of
more than 640 x 480, it will take a long time to be
shown.)
This System can play only baseline JPEG files*.
Progressive JPEG files* or lossless JPEG files* cannot
be played.
* Baseline JPEG format:
Used for digital cameras,
web, etc.
Progressive JPEG format: Used for web.
Lossless JPEG format:
An old type and rarely used
now.
This System can play back JPEG files with the extension
code <.jpg> or <.jpeg> (regardless of the letter case
upper/lower).
This System may not play back JPEG files properly if
they are recorded from a device other than a digital
camera.
33
For MPEG-1/MPEG-2 playback...
This System can play back MPEG-1/MPEG-2 files with
the extension code <.mpg> or <.mpeg> (regardless of the
letter caseupper/lower).
The stream format should conform to MPEG system/
program stream.
720 x 576 pixels (25 fps)/720 x 480 pixels (30 fps) is
recommended for the highest resolution.
This System also supports the resolutions of 352 x 576/
480 x 576/ 352 x 288 pixels (25 fps) and 352 x 480/ 480
x 480/ 352 x 240 pixels (30 fps).
The file format should be MP@ML (Main Profile at
Main Level)/SP@ML (Simple profile at Main Level)/
MP@LL (Main Profile at Low Level).
Audio streams should conform to MPEG1 Audio Layer2 or MPEG2 Audio Layer-2.
For DivX playback...
This System can play only a disc of UDF-Bridge format.
Multi-border is not supported.
The System supports all versions of DivXR video
(including DivXR 6).
The System supports DivX files whose resolution is 720
x 480 pixels or less (30 fps), and 720 x 576 pixels or less
(25 fps).
Audio stream should conform to Dolby Digital, MPEG1
Audio Layer-2 or MPEG Audio Layer-3 (MP3).
This System can play back DivX files with the extension
code <.divx> <.div> <.avi> (regardless of the letter
caseupper/lower).
The System does not support GMC (Global Motion
Compression).
The file encoded in the interlaced scanning mode may
not be played back correctly.
UX-G48[U].book Page 34 Friday, July 13, 2007 5:01 PM
Playing Back a Digital Audio Player:
When QP Link fails due to a weak sound signal from the
LINE IN jack, Auto Standby may turn the System off even
if you can hear the sound from the speakers.
In such cases, adjust the volume level of the component
louder so that the System can detect the sound signal
properly.
Changing from LINE to another source while QP Link
works will deactivate QP Link temporarily.
In this case, the following reactivates QP Link:
Pressing QP LINK on the remote control twice.
Unplugging the component from the LINE IN jack, then
plugging back it in again.
(Standby/on) to turn the System off or if
If you press
preset Timer turns the System off while QP Link works,
the System will deactivate QP Link temporarily.
In such cases, the following reactivates QP Link:
When the sound signal from the LINE IN jack stops or is
too weak for about 30 seconds after the System is turned
off.
When you turn on the power again.
QP Link may start working when you just connect the
component to the LINE IN jack or disconnect it. This is not
a malfunction.
QP Link does not work when the display is turned off (see
page 7).
Daily OperationsSound & Other Adjustments
(see pages 13 to 16)
Adjusting the Sound:
This function also affects the sound through the
headphones.
Changing the Color System and Scanning Mode:
If you play back an NTSC disc/file with the color system
set to PAL (PRG), the disc/file will be reproduced using
PAL 60 format; however, if the TV does not support this
format, the screen may not display properly.
If you play back a PAL disc/file with the color system set
to NTSC (PRG), you can watch the playback pictures,
but the following symptoms may occur:
The items on the menu will be blurred, and be shown
slightly shifted when highlighted.
The aspect ratio of the picture may differ from the
original aspect ratio.
The picture movement is not smooth.
You cannot change the scanning mode to progressive in the
following cases:
When your TV does not support the progressive video
input.
When you have not connected your TV to the unit using
a component video cord.
When you play back an NTSC disc/file in progressive
scanning mode either NTSC PRG or PAL PRG, the System
outputs the NTSC signal regardless of the color system
settings.
Setting the Clock:
0:00 will flash on the display until you set the clock.
The clock may gain or lose 1 to 2 minutes per month. If this
happens, reset the clock.
Unique Video Disc/File Operations (see pages 17
to 19)
Selecting the Audio Track:
On some discs/files, you cannot change audio language
during playback.
Special Effect Playback:
During slow-motion playback, no sound will be emitted.
While zoomed in, the picture may look coarse.
Advanced Playback Operations (see pages 20
to 22)
Programming the Playing OrderProgram Play:
While programming steps...
Your entry will be ignored if you have tried to program an
item number that does not exist (for example, selecting
track 14 on a disc that only has 12 tracks).
Playing Repeatedly:
A-B Repeat is available only within the same title/
program/track.
34
UX-G48[U].book Page 35 Friday, July 13, 2007 5:01 PM
On-Screen Operations (see pages 23 to 27)
On-screen Bar Operations:
For DVD-VR, PG or PL appears instead of TITLE
on the on-screen bar.
Daily Timer Operations (see pages 28 and 29)
Maintenance
To get the best performance of the System, keep your discs
and mechanism clean.
Handling discs
Setting the Daily Timer:
If you do not specify the preset station or track number
correctly while setting a timer, the currently selected
station or the first track will be played when the timer is
activated.
When you unplug the power cord or if a power failure
occurs, the timer will be canceled. You need to set the
clock first, then the timer again.
If you set DVD Video as the source, Daily Timer will not
work correctly.
If you set the Sleep Timer after Daily Timer starts playing
the selected source, Daily Timer is canceled.
Remove the disc from its case by holding it at the edge
while pressing the center hole lightly.
Do not touch the shiny surface of the disc, or bend the disc.
Put the disc back in its case after use to prevent warping.
Be careful not to scratch the surface of the disc when
placing it back in its case.
Avoid exposure to direct sunlight, extreme temperature,
and moisture.
To clean the disc:
Wipe the disc with a soft cloth in a straight line from center
to edge.
Setup Menu Operations (see pages 30 and 31)
Stains should be wiped off with a soft cloth. If the System
is heavily stained, wipe it with a cloth soaked in waterdiluted neutral detergent and wrung well, then wipe clean
with a dry cloth.
Since the System may deteriorate in quality, become
damaged or get its paint peeled off, be careful about the
following:
DO NOT wipe it with a hard cloth.
DO NOT wipe it forcefully.
DO NOT wipe it with thinner or benzine.
DO NOT apply any volatile substance such as
insecticides to it.
DO NOT allow any rubber or plastic to remain in contact
for a long time.
General:
If the upper and lower parts of the menu are cut off, adjust
the picture size control of the TV.
LANGUAGE menu:
When the language you have selected for MENU
LANGUAGE, AUDIO LANGUAGE, or
SUBTITLE is not recorded, the original language is used
as the initial language.
PICTURE menuMONITOR TYPE:
Even if 4:3 PS/4:3 MULTI PS is selected, the screen size
may become 4:3 letter box while playing a disc/file. This
depends on how they are recorded.
When you select 16:9 NORMAL/16:9 MULTI
NORMAL or 16:9 AUTO/16:9 MULTI AUTO for a
picture whose aspect ratio is 4:3, the picture slightly
changes due to the process for converting the picture width.
OTHERS menuON SCREEN GUIDE:
The setup menu and on-screen bar will be displayed (and
recorded) even if this function is set to OFF.
Subtitles and the information for zoom-in always appear on
the display regardless of this setting.
Cleaning the System
To remove the speaker grilles:
Holes
Projection
Speaker grille
35
UX-G48[U].book Page 36 Friday, July 13, 2007 5:01 PM
Troubleshooting
General:
Adjustments or settings are suddenly canceled before
you finish.
] There is a time limit. Repeat procedure again.
Operations are disabled.
] The built-in microprocessor may malfunction due to
external electrical interference. Unplug the power cord
and then plug it back in.
Unable to operate the System from the remote control.
] The path between the remote control and the remote
sensor on the System is blocked.
] The batteries are exhausted.
No sound is heard.
] Speaker connections are incorrect or loose.
] Headphones are connected.
No picture appears on the TV screen.
] The video cord connections are incorrect or loose.
No picture is displayed on the TV screen, the picture is
blurred, or the picture is divided into two parts.
] The System is connected to a TV which does not support
progressive video input.
] Incorrect color system is selected (see page 15).
The left and right edges of the picture are missing on the
screen.
] Select 4:3 LB/4:3 MULTI LB for MONITOR TYPE
(see page 30).
Radio Operations:
Hard to hear broadcasts because of noise.
] Antenna connections are incorrect or loose.
] The AM loop antenna is too close to the System.
] The FM antenna is not properly extended and
positioned.
Disc/USB mass storage class device Playback
Operations:
The disc does not play.
] You have inserted a disc whose Region Code is not
correct. (RG ERROR appears on the display.)
] The disc is placed upside down. Place the disc with the
label side facing up.
ID3 Tag on an MP3 file cannot be shown.
] There are two types of ID3 TagVersion 1 and Version 2.
This System can only show ID3 Tag Version 1.
Groups and tracks are not played back as you expect.
] The playing order is determined when the groups and
tracks were recorded. It depends on the writing
application.
MP3, WMA, WAV, JPEG, MPEG-1, MPEG-2 or DivX
files are not played back.
] The disc or the USB mass storage class device may
contain different types of files (ex. MP3/WMA/WAV/
JPEG). In this case, you can only play back the files
selected by the FILE TYPE setting (see page 30).
] You have changed the FILE TYPE setting after the
System read the disc or the USB mass storage class
device. In this case, reload the disc or disconnect the
USB mass storage class device and connect it again.
The disc sound is discontinuous.
] The disc is scratched or dirty.
No subtitle appears on the display though you have
selected the initial subtitle language.
] Some DVDs/DivX files are programmed not to display
any subtitle initially. If this happens, press SUBTITLE
after starting play back (see page 18).
Audio language is different from the one you have
selected as the initial audio language.
] Some DVDs/DivX files are programmed to always use
the original language initially. If this happens, press
AUDIO/MPX after starting playback (see page 17).
The disc tray does not open or close.
] The power cord is not plugged in.
] Child Lock is in use. LOCKED appears in the display
window (see page 22).
QP Link Operations:
The System automatically turns on even if the Timer
turns the System to standby or if you turn the System to
standby while playback is going on the digital audio
player.
] In this case, deactivate QP Link or stop playback on the
digital audio player connected to the LINE IN jack.
Timer Operations:
Daily Timer does not work.
] The System has been turned on when the on-time came.
Timer starts working only when the System is turned off.
Daily Timer does not start playback.
] The loaded disc is a DVD Video. Change the disc.
36
UX-G48[U].book Page 37 Friday, July 13, 2007 5:01 PM
Language Code List
AA
Afar
KK
Kazakh
SR
Serbian
AB
Abkhazian
KL
Greenlandic
SS
Siswati
AF
Afrikaans
KM
Cambodian
ST
Sesotho
AM
Ameharic
KN
Kannada
SU
Sundanese
AR
Arabic
KO
Korean (KOR)
SV
Swedish
AS
Assamese
KS
Kashmiri
SW
Swahili
AY
Aymara
KU
Kurdish
TA
Tamil
AZ
Azerbaijani
KY
Kirghiz
TE
Telugu
BA
Bashkir
LA
Latin
TG
Tajik
BE
Byelorussian
LN
Lingala
TH
Thai
BG
Bulgarian
LO
Laothian
TI
Tigrinya
BH
Bihari
LT
Lithuanian
TK
Turkmen
BI
Bislama
LV
Latvian, Lettish
TL
Tagalog
BN
Bengali, Bangla
MG
Malagasy
TN
Setswana
BO
Tibetan
MI
Maori
TO
Tonga
BR
Breton
MK
Macedonian
TR
Turkish
CA
Catalan
ML
Malayalam
TS
Tsonga
CO
Corsican
MN
Mongolian
TT
Tatar
CY
Welsh
MO
Moldavian
TW
Twi
DA
Danish
MR
Marathi
UK
Ukrainian
DZ
Bhutani
MS
Malay (MAY)
UR
Urdu
EL
Greek
MT
Maltese
UZ
Uzbek
EO
Esperanto
MY
Burmese
VI
Vietnamese
ET
Estonian
NA
Nauru
VO
Volapuk
EU
Basque
NE
Nepali
WO
Wolof
FA
Persian
NL
Dutch
XH
Xhosa
FI
Finnish
NO
Norwegian
YO
Yoruba
FJ
Fiji
OC
Occitan
ZU
Zulu
FO
Faroese
OM
(Afan) Oromo
FY
Frisian
OR
Oriya
GA
Irish
PA
Panjabi
GD
Scots Gaelic
PS
Pashto, Pushto
GL
Galician
PT
Portuguese
GN
Guarani
QU
Quechua
GU
Gujarati
RM
Rhaeto-Romance
HA
Hausa
RN
Kirundi
HI
Hindi
RO
Rumanian
HR
Croatian
RW
Kinyarwanda
HY
Armenian
SA
Sanskrit
IA
Interlingua
SD
Sindhi
IE
Interlingue
SG
Sangho
IK
Inupiak
SH
Serbo-Croatian
IN
Indonesian
SI
Singhalese
IS
Icelandic
SL
Slovenian
IW
Hebrew
SM
Samoan
JI
Yiddish
SN
Shona
JW
Javanese
SO
Somali
KA
Georgian
SQ
Albanian
37
UX-G48[U].book Page 38 Friday, July 13, 2007 5:01 PM
OPTICAL DIGITAL OUT Signals
DIGITAL AUDIO
OUTPUT
Playback disc/file
DVD Video
with 48 kHz, 16 bit/20 bit/24 bit
Linear PCM
with 96 kHz, Linear PCM
Output Signals
STREAM/PCM
PCM ONLY
48 kHz, 16 bit Linear PCM*
48 kHz, 16 bit Linear PCM
with Dolby Digital
with DTS
DVD-R/-RW in DVD-VR format
with 48 kHz, 16 bit/20 bit/24 bit
Linear PCM
with Dolby Digital
SVCD/VCD/CD
CD with DTS
MP3/WMA/WAV/MPEG-1/MPEG-2
DivX disc/file
with MP2, MP3
DOLBY DIGITAL/PCM
Dolby Digital bitstream
DTS bitstream
48 kHz, 16 bit Linear PCM
48 kHz, 16 bit Linear PCM
48 kHz, 16 bit Linear PCM*
Dolby Digital bitstream
48 kHz, 16 bit Linear PCM
44.1 kHz, 16 bit Linear PCM/48 kHz, 16 bit Linear PCM
DTS bitstream
44.1 kHz, 16 bit Linear PCM
32 kHz/44.1 kHz/48 kHz, 16 bit Linear PCM
32 kHz/44.1 kHz/48 kHz, 16 bit Linear PCM
32 kHz/44.1 kHz/48 kHz,
Dolby Digital bitstream
16 bit Linear PCM
with Dolby Digital
* While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the OPTICAL DIGITAL
OUT terminal if the discs are not copy-protected.
Operating JVCs TVs Using the Remote Control
You can use the remote control to operate JVCs TVs.
Remote control
Turn on/off TV.
TV
TV/VIDEO
TV
TV/VIDEO
TV CH ,
SHIFT
Change the input mode.
While holding SHIFT, press...
TV VOL +,
Adjust the volume.
TV CH
Change the channel.
TV VOL
+,
38
UX-G48[U].book Page 39 Friday, July 13, 2007 5:01 PM
Specifications
Amplifier sectionCA-UXG48
USB section
Playable files:
MP3/WMA/WAV/JPEG/MPEG-1/
MPEG-2/DivX format
Compatible with USB 2.0 Full Speed
Mass storage class
FAT16, FAT32
500 mA/5 V
Output Power: 40 W (20 W + 20 W) at 6 (10% THD)
Audio Input LINE IN:
500 mV/50 k (at IN_LVL1)
250 mV/50 k (at IN_LVL2)
125 mV/50 k (at IN_LVL3)
Audio output LINE OUT:
1.0 Vrms (47 k) (at OUT_LVL1)
2.0 Vrms (47 k) (at OUT_LVL2)
Digital output OPTICAL DIGITAL OUT:
21 dBm to 15 dBm (660 nm 30 nm)
Digital input: USB MEMORY
Video Out:
Color system:
NTSC or PAL (interlaced/progressive)
VIDEO (composite):
1 V(p-p)/75
S-VIDEO: Y (luminance)
1 V(p-p)/75
C (chrominance, burst)
PAL
0.3 V(p-p)/75
NTSC
0.286 V(p-p)/75
COMPONENT: (Y)
1 V(p-p)/75
0.7 V(p-p)/75
(PB/PR)
Speaker impedance:
6 16
USB specification:
Compatible device:
Compatible system:
Bus power supply:
Tuner section
Supplied Accessories
FM tuning range:
87.50 MHz 108.00 MHz
AM (MW) tuning range:
For Saudi Arabia:
531 kHz 1 602 kHz (at 9 kHz intervals)
530 kHz 1 600 kHz (at 10 kHz intervals)
For other countries:
531 kHz 1 710 kHz (at 9 kHz intervals)
530 kHz 1 710 kHz (at 10 kHz intervals)
Disc player section
Region codes: Middle East: 2
South East Asia, Hong Kong region: 3
Central and South America, Australia: 4
Playable disc: DVD Video/CD/VCD/SVCD/
CD-R/CD-RW (CD/SVCD/VCD/MP3/
WMA/WAV/JPEG/MPEG-1/MPEG-2/
DivX format)
DVD-R/-RW (DVD-VR/DVD Video/MP3/
WMA/WAV/JPEG/MPEG-1/MPEG-2/
DivX format)
+R/+RW (DVD Video/MP3/WMA/WAV/
JPEG/MPEG-1/MPEG-2/DivX format)
DVD-ROM (MP3/WMA/WAV/JPEG/
MPEG-1/MPEG-2/DivX format)
Dynamic range:
80 dB
Horizontal resolution:
500 lines
Wow and flutter:
Immeasurable
39
General
Power requirements:
AC 110 - 240 V
, 50/60 Hz
For Australia:
AC 240 V
, 50 Hz
For Hong Kong region and Thailand:
AC 220 V
, 50 Hz
Power consumption:
26 W (at operation)
7 W (at standby)
1 W (at display-off mode)
Dimensions (approx.):175 mm x 251 mm x 247 mm (W/H/D)
Mass (approx.):
2.6 kg
SpeakersSP-UXG48
Speaker units:
Tweeter:
Woofer:
1.5 cm dome x 1
10 cm cone x 1
Impedance:
6
Dimensions (approx.):145 mm x 251 mm x 175 mm (W/H/D)
Mass (approx.):
1.7 kg each
See page 3.
Design and specifications are subject to change without notice.
Manufactured under license from Dolby Laboratories. Dolby,
Pro Logic, and the double-D symbol are trademarks of Dolby
Laboratories.
DTS is a registered trademark of DTS, Inc. and
DTS2.0+Digital Out is a trademark of DTS, Inc.
Official DivX Ultra Certified product Plays all versions of
DivX video (including DivX 6) with enhanced playback of
DivX media files and the DivX Media Format DivX, DivX
Ultra Certified, and associated logos are trademarks of DivX, Inc.
and are used under licence.
Microsoft and Windows Media are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or
other countries.
This product incorporates copyright protection technology that is
protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by
Macrovision, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE
OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS,
IT IS RECOMMENDED THAT THE USER SWITCH THE
CONNECTION TO THE STANDARD DEFINITION
OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR
TV SET COMPATIBILITY WITH THIS MODEL 525p AND
625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER
SERVICE CENTER.
UX-G48[U].book Page 40 Friday, July 13, 2007 5:01 PM
Parts Index
Remote control
Button
AUDIO
TV
7
, 1
,4
8
, , ,
, ENTER/SET
(One-Touch Replay)
3D P/HP S
A.STANDBY
AHB PRO
ANGLE
AUDIO/MPX
AUDIO VOL + ,
BASS/TREBLE
C.VOICE
CANCEL
CLOCK/TIMER
DIMMER
DISPLAY
DVD/CD 3
DVD/LINE LEVEL
FADE MUTING
FM/AM
FM/PLAY MODE
GROUP/TITLE
GROUP/TITLE SKIP
LINE
MENU/PL
Number buttons
ON SCREEN
QP LINK
REPEAT
REPEAT A-B
RETURN
SCAN MODE
SET UP
SHIFT
SLEEP
SLOW 9 , (
SOUND TURBO II
SUBTITLE
TOP MENU/PG
TV CH 9 , (
TV/VIDEO
TV VOL + ,
USB MEMORY 3
VFP
ZOOM
g
h
t
u
,
y
q
n
5
f
;
7
o
Q
E
4
9
j
3
/
r
a
W
v
.
m
,
b
x
1
c
;
P
P
8
l
w
s
2
u
d
i
p
q
k
Q
e
z
6
Page
7, 29
38
10, 11, 20, 21
9, 11
8, 11, 20, 21
10, 19 21, 27
9, 11, 15, 16, 18 20, 24 30
19
14
16
13
18
17
7, 13
13
14
16, 21, 28, 29
16, 28, 29
7, 14
16
7, 9 12, 19 21, 27
12, 14
13
7 9, 12
8, 20, 21
10
10
7, 12
11, 26, 27
8, 9, 11, 25, 26
24
12
21
22
11
15
30
7, 10, 11, 13 16, 18, 19, 21, 22, 28, 29, 38
16
19
13
18
11, 26, 27
38
38
38
7, 10 12, 19, 27
15
19
Main unit
Button
& STANDBY lamp
7
0
UP, DOWN 4
DIMMER
Display
DVD/CD #/8
FM/AM
LINE IN/OUT
LINE
PHONES
Remote sensor
SOUND TURBO II
USB MEMORY jack
USB MEMORY #/8
VOLUME + ,
3
6
#
7@
2
1
5
~
$
!
9
0
8
4
=
Page
7, 8, 22
10, 22
9
8, 11, 20
7, 14
6
7, 10, 12, 19, 27
7, 8, 12
5
7, 12
7
5
13
5
7, 10, 12, 19, 27
13
Remote control
1
2
3
4
5
6
7
8
9
p
q
w
e
r
t
y
10
10
f
g
h
j
k
l
/
z
x
c
v
b
n
m
,
.
P
Q
u
i
o
;
a
s
d
W
E
This remote control can also operate JVCs TVs
(see page 38).
Main unit
1
2
3
4
5
6
7
8
9
0
=
~
!
@
#
40
UX-G48[U].book Page 2 Friday, July 13, 2007 5:01 PM
UX-G48
MICRO COMPONENT SYSTEM
EN
2007 Victor Company of Japan, Limited
0707WMKMDCJMM
You might also like
- 2007-2014 Mercedes-Benz W204 (C-Class) Fuse Diagram Fuse Diagram92% (24)2007-2014 Mercedes-Benz W204 (C-Class) Fuse Diagram Fuse Diagram11 pages
- Masterplug Electronic Timer Instruction (E)No ratings yetMasterplug Electronic Timer Instruction (E)1 page
- AIWA CS-P700 Stereo Radio Cassette RecorderNo ratings yetAIWA CS-P700 Stereo Radio Cassette Recorder8 pages
- Tecsun PL 880 Hidden Features Firmware 8820 v1.0100% (1)Tecsun PL 880 Hidden Features Firmware 8820 v1.01 page
- CD Stereo System Sistema Estéreo Con Reproductor de Discos Compactos SC-AKX200No ratings yetCD Stereo System Sistema Estéreo Con Reproductor de Discos Compactos SC-AKX2002 pages
- Digital Home Entertainment System: User ManualNo ratings yetDigital Home Entertainment System: User Manual36 pages
- User Manual Samsung MX E750 E760 E770 0424 ENG CMSNo ratings yetUser Manual Samsung MX E750 E760 E770 0424 ENG CMS16 pages
- Sony UBP X800 UBP X1000ES Fitting InstructionsNo ratings yetSony UBP X800 UBP X1000ES Fitting Instructions3 pages
- JVC CD Receiver Instructionsinstallation Manual For JVC KD s16 Car Stereo SystemNo ratings yetJVC CD Receiver Instructionsinstallation Manual For JVC KD s16 Car Stereo System0 pages
- TV Media Player BPR-101 - MANUAL - English Portable Media DriveNo ratings yetTV Media Player BPR-101 - MANUAL - English Portable Media Drive26 pages
- DVD Receiver With Monitor KW-AVX810: InstructionsNo ratings yetDVD Receiver With Monitor KW-AVX810: Instructions243 pages
- user-manual-EMTEC-HDD MOVIE CUBE Q800-E PDFNo ratings yetuser-manual-EMTEC-HDD MOVIE CUBE Q800-E PDF16 pages
- LG Ras375bf Ras375bw Rat375 Ras375f mfl63284608No ratings yetLG Ras375bf Ras375bw Rat375 Ras375f mfl6328460823 pages
- MINI-Compact System: MP3-CD/WMA-CD/CD-R/RW Playback User ManualNo ratings yetMINI-Compact System: MP3-CD/WMA-CD/CD-R/RW Playback User Manual18 pages
- Personal Audio System: Listening To The Radio Recording On A TapeNo ratings yetPersonal Audio System: Listening To The Radio Recording On A Tape2 pages
- Radio Shack TRS-80 Expansion Interface: Operator's Manual Catalog Numbers: 26-1140, 26-1141, 26-1142From EverandRadio Shack TRS-80 Expansion Interface: Operator's Manual Catalog Numbers: 26-1140, 26-1141, 26-1142No ratings yet
- Behringer PRO-800 Synthesizer Power: A Comprehensive User Guide and Reference ManualFrom EverandBehringer PRO-800 Synthesizer Power: A Comprehensive User Guide and Reference ManualNo ratings yet
- Administrator & Helpdesk Interview Questions You'll Most Likely Be AskedFrom EverandAdministrator & Helpdesk Interview Questions You'll Most Likely Be AskedNo ratings yet
- Sanyo Micro Component System DC-DA370 Instruction ManualNo ratings yetSanyo Micro Component System DC-DA370 Instruction Manual12 pages
- Panasonic MP3 Digital Audio Player SV-MP100v 110v 120v Operating InstructionNo ratings yetPanasonic MP3 Digital Audio Player SV-MP100v 110v 120v Operating Instruction8 pages
- Programmable Digital Timer EF700ET Manual (E)No ratings yetProgrammable Digital Timer EF700ET Manual (E)5 pages
- Analog Servo Drive: Description Power RangeNo ratings yetAnalog Servo Drive: Description Power Range9 pages
- 9553 Sony HCD-RG490 RG590 Sistema de Audio CD-casette Manual de ServicioNo ratings yet9553 Sony HCD-RG490 RG590 Sistema de Audio CD-casette Manual de Servicio108 pages
- KEH-P5900R KEH-P4930R KEH-P4900R: ManualNo ratings yetKEH-P5900R KEH-P4930R KEH-P4900R: Manual48 pages
- Service Manual: Mini Hi-Fi Component SystemNo ratings yetService Manual: Mini Hi-Fi Component System89 pages
- Service Manual: AM/FM Radio CD CombinationNo ratings yetService Manual: AM/FM Radio CD Combination12 pages
