Scribd
Upload
1K views

Radio Building Blocks

The document discusses Radio Building Blocks (RBBs) which combine radio units in a sector. RBBs are named based on the number of TX branches, RX branches, CPRI links, and version. Examples of common RBB configurations are provided.

Uploaded by

amirfiroozi87
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
1K views

Radio Building Blocks

The document discusses Radio Building Blocks (RBBs) which combine radio units in a sector. RBBs are named based on the number of TX branches, RX branches, CPRI links, and version. Examples of common RBB configurations are provided.

Uploaded by

amirfiroozi87
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Generated by Foxit PDF Creator Foxit Software

http://www.foxitsoftware.com For evaluation only.

Radio building blocks


A Radio Building Block (RBB) is a unique way of combining RUs or RRUs in one sector.
The RBB defines the capacity for a sector and the connections to the antenna system
and the DUs.
RBBs are named as follows:
RBB[Tx][Rx]_[C][V],
where: Tx
Rx
C
V

: Number of TX branches
: Number of RX branches (excluding co-siting RX ports)
: Number of CPRI links
: Version

Example:

RBB12_1A One TX branch


Two RX branches
One CPRI-link between DU and RU or RRU
Version A

RBB11_1A

RBB12_1A

RBB22_1A

RBB22_2A

RBB32_3A

RBB32_3B

RBB22_1B

RBB22_2B

RBB24_2A

RBB43_4A

RBB11_1A
RBB11_1A is used for sectors with one TX branch, one RX branches, one external RX
branch, and one CPRI connection. This RBB is used for co-siting and RX sharing.

Generated by Foxit PDF Creator Foxit Software


http://www.foxitsoftware.com For evaluation only.

RBB12_1A
RBB12_1A is used for sectors with two RX branches, one TX branch, and one CPRI
connection.

RBB22_1A
RBB22_1A is used for sectors with two TX branches, two RX branches, andone CPRI
connection. There is an analog cross-connection between the RUs or RRUs.

Generated by Foxit PDF Creator Foxit Software


http://www.foxitsoftware.com For evaluation only.

RBB22_1B
RBB22_1B is used for sectors with two TX branches, two RX branches, and one CPRI
connection.

RBB22_2A
RBB22_2A is used for sectors with two TX branches, two RX branches, and two CPRI
connections. This RBB uses a digital RX cross connection.

Generated by Foxit PDF Creator Foxit Software


http://www.foxitsoftware.com For evaluation only.

RBB22_2B
RBB22_2B is used for sectors with two TX branches, two RX branches, and two CPRI
connections. There is an analog cross-connection between the RUs or RRUs.

RBB24_2A
RBB24_2A is used for sectors with two TX branches, four RX branches, and two CPRI
connections. This RBB uses a digital RX cross connection.

Generated by Foxit PDF Creator Foxit Software


http://www.foxitsoftware.com For evaluation only.

RBB32_3A
RBB32_3A is used for sectors with three TX branches, two RX branches, and three
CPRI connections. There is an analog cross-connection between the RUs or RRUs.
This RBB is used for TMA minimization.

RBB32_3B
RBB32_3B is used for sectors with three TX branches, two RX branches and one
external RX cross connection, and three CPRI connections. There is an analog crossconnection between the RUs or RRUs.

Generated by Foxit PDF Creator Foxit Software


http://www.foxitsoftware.com For evaluation only.

RBB43_4A
RBB43_4A is used for sectors with four TX branches, three RX branches, and four CPRI
connections. There is an analog cross-connection between the RUs or RRUs.

You might also like