Scribd
Upload
2K views

SS7 Protocol Layers

The SS7 protocol is layered and consists of multiple protocol layers that each provide different functions to support telecommunications. The physical layer defines signaling link characteristics and carries raw data. The message transfer part layers provide link functionality, ensure inter-node message delivery, and include capabilities like routing and congestion control. The signaling connection control part and transaction capabilities application part allow messages to be addressed and routed to specific applications within nodes. The operations, maintenance, and administration part defines messages for network administration tasks.

Uploaded by

pnvsridhar86
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
2K views

SS7 Protocol Layers

The SS7 protocol is layered and consists of multiple protocol layers that each provide different functions to support telecommunications. The physical layer defines signaling link characteristics and carries raw data. The message transfer part layers provide link functionality, ensure inter-node message delivery, and include capabilities like routing and congestion control. The signaling connection control part and transaction capabilities application part allow messages to be addressed and routed to specific applications within nodes. The operations, maintenance, and administration part defines messages for network administration tasks.

Uploaded by

pnvsridhar86
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

SS7 Protocol layers:

The SS7 network is an interconnected set of network elements that is used to exchange messages in support
of telecommunications functions. The SS7 protocol is designed to both facilitate these functions and to
maintain the network over which they are provided. Like most modern protocols, the SS7 protocol is
layered.

Physical Layer (MTP-1)

This defines the physical and electrical characteristics of the signaling links of the SS7 network. Signaling
links utilize DS–0 channels and carry raw signaling data at a rate of 56 kbps or 64 kbps (56 kbps is the
more common implementation).

Message Transfer Part—Level 2 (MTP-2)

The level 2 portion of the message transfer part (MTP Level 2) provides link-layer functionality. It ensures
that the two end points of a signaling link can reliably exchange signaling messages. It incorporates such
capabilities as error checking, flow control, and sequence checking.

Message Transfer Part—Level 3 (MTP-3)

The level 3 portion of the message transfer part (MTP Level 3) extends the functionality provided by MTP
level 2 to provide network layer functionality. It ensures that messages can be delivered between signaling
points across the SS7 network regardless of whether they are directly connected. It includes such
capabilities as node addressing, routing, alternate routing, and congestion control.
SS7 layer architecture diagram

Signaling Connection Control Part (SCCP)

The signaling connection control part (SCCP) provides two major functions that are lacking in the MTP.
The first of these is the capability to address applications within a signaling point. The MTP can only
receive and deliver messages from a node as a whole; it does not deal with software applications within a
node.

While MTP network-management messages and basic call-setup messages are addressed to a node as a
whole, other messages are used by separate applications (referred to as subsystems) within a node.
Examples of subsystems are 800 call processing, calling-card processing, advanced intelligent network
(AIN), and custom local-area signaling services (CLASS) services (e.g., repeat dialing and call return). The
SCCP allows these subsystems to be addressed explicitly.

ISDN User Part (ISUP)

ISUP user part defines the messages and protocol used in the establishment and tear down of voice and data
calls over the public switched network (PSN), and to manage the trunk network on which they rely. Despite
its name, ISUP is used for both ISDN and non–ISDN calls. In the North American version of SS7, ISUP
messages rely exclusively on MTP to transport messages between concerned nodes.

Transaction Capabilities Application Part (TCAP)

TCAP defines the messages and protocol used to communicate between applications (deployed as
subsystems) in nodes. It is used for database services such as calling card, 800, and AIN as well as switch-
to-switch services including repeat dialing and call return. Because TCAP messages must be delivered to
individual applications within the nodes they address, they use the SCCP for transport.

Operations, Maintenance, and Administration Part (OMAP)

OMAP defines messages and protocol designed to assist administrators of the SS7 network. To date, the
most fully developed and deployed of these capabilities are procedures for validating network routing
tables and for diagnosing link troubles. OMAP includes messages that use both the MTP and SCCP for
routing.

You might also like