The Linux Tips HOWTO

The Linux Tips HOWTO

Table of Contents
The Linux Tips HOWTO...................................................................................................................................1
Paul Anderson, paul@geeky1.ebtech.net................................................................................................1
1.Introduction...........................................................................................................................................1
2.Short Tips..............................................................................................................................................1
3.Detailed Tips.........................................................................................................................................2
1.Introduction...........................................................................................................................................2
2.Short Tips..............................................................................................................................................2
2.1 Handy Syslog Trick Paul Anderson, Tips−HOWTO maintainer......................................................2
2.2 Script to view those compressed HOWTOs. Didier Juges,[email protected]
2.3 Is there enough free space??? Hans Zoebelein,zocki@goldfish.cube.net.........................................3
2.4 Util to clean up your logfiles. Paul Anderson, Tips−HOWTO Maintainer>.....................................5
2.5 Handy Script to Clean Up Corefiles. Otto Hammersmith,ohammers@cu−online.com....................5
2.6 Moving directories between filesystems. Alan Cox,[email protected]
2.7 Finding out which directories are the largest. Mick Ghazey,[email protected]
2.8 The Linux Gazette..............................................................................................................................6
2.9 Pointer to patch for GNU Make 3.70 to change VPATH behavior.Ted Stern,[email protected]
2.10 How do I stop my system from fscking on each reboot? Dale Lutz,[email protected]
2.11 How to avoid fscks caused by "device busy" at reboot time. Jon Tombs,[email protected]
2.12 How to find the biggest files on your hard−drive............................................................................7
2.13 How to print pages with a margin for hole punching. Mike Dickey,[email protected]
2.14 A way to search through trees of files for a particular regular expression.Raul Deluth Miller,rockwell@no
2.15 A script for cleaning up after programs that create autosave and backup files.Barry Tolnas,tolnas@nestor.
2.16 How to find out what process is eating the most memory. Simon Amor,[email protected]
2.17 Rigging vi for C programming, Paul Anderson,Tips−HOWTO Maintainer...................................9
2.18 Using ctags to ease programming..................................................................................................10
2.19 Why does sendmail hang for 5 minutes on startup with RedHat? Paul Anderson,[email protected] 0
2.20 How do I configure RedHat for using color−ls? Paul Anderson,[email protected]
2.21 How do I find which library in /usr/lib holds a certain function? Pawel Veselow,[email protected]. 1
2.22 I compiled a small test program in C, but when I run it, I get no output!......................................11
3.Detailed Tips.......................................................................................................................................12
3.1 Sharing swap partitions between Linux and Windows. Tony Acero,[email protected]
3.2 Desperate Undelete. Michael Hamilton,michael@actrix.gen.nz.....................................................13
3.3 How to use the immutable flag. Jim Dennis,jadestar@rahul.net.....................................................14
3.4 A suggestion for where to put new stuff.Jim Dennis,[email protected]
3.5 Converting all files in a directory to lowercase. Justin Dossey,[email protected]
3.6 How To Upgrade SendmailPaul Anderson,paul@geeky1.ebtech.net.............................................16
3.7 Some tips for new sysadmins.Jim Dennis,jadestar@rahul.net........................................................17
3.8 How to configure xdm's chooser for host selection. Arrigo Triulzi,[email protected]

i
The Linux Tips HOWTO

Paul Anderson, [email protected]

v3.6, June 1998

This HOWTO contains those hard to find hints and tweekings that make Linux a bit nicer.

1.Introduction

2.Short Tips
• 2.1 Handy Syslog Trick Paul Anderson, Tips−HOWTO maintainer
• 2.2 Script to view those compressed HOWTOs. Didier Juges,[email protected]
• 2.3 Is there enough free space??? Hans Zoebelein,[email protected]
• 2.4 Util to clean up your logfiles. Paul Anderson, Tips−HOWTO Maintainer>
• 2.5 Handy Script to Clean Up Corefiles. Otto Hammersmith,
• 2.6 Moving directories between filesystems. Alan Cox,[email protected]
• 2.7 Finding out which directories are the largest. Mick Ghazey,
• 2.8 The Linux Gazette
• 2.9 Pointer to patch for GNU Make 3.70 to change VPATH behavior.
• 2.10 How do I stop my system from fscking on each reboot? Dale Lutz,[email protected]
• 2.11 How to avoid fscks caused by "device busy" at reboot time. Jon Tombs,[email protected]
• 2.12 How to find the biggest files on your hard−drive.
• 2.13 How to print pages with a margin for hole punching. Mike
Dickey,[email protected]
• 2.14 A way to search through trees of files for a particular regular expression.
• 2.15 A script for cleaning up after programs that create autosave and backup files.
• 2.16 How to find out what process is eating the most memory. Simon Amor,
• 2.17 Rigging vi for C programming, Paul Anderson,Tips−HOWTO Maintainer
• 2.18 Using ctags to ease programming.
• 2.19 Why does sendmail hang for 5 minutes on startup with RedHat? Paul Anderson,
• 2.20 How do I configure RedHat for using color−ls? Paul Anderson,[email protected]
• 2.21 How do I find which library in /usr/lib holds a certain function? Pawel Veselow,
• 2.22 I compiled a small test program in C, but when I run it, I get no output!

The Linux Tips HOWTO 1

 The Linux Tips HOWTO

3.Detailed Tips
• 3.1 Sharing swap partitions between Linux and Windows. Tony
Acero,[email protected]
• 3.2 Desperate Undelete. Michael Hamilton,[email protected]
• 3.3 How to use the immutable flag. Jim Dennis,[email protected]
• 3.4 A suggestion for where to put new stuff.
• 3.5 Converting all files in a directory to lowercase. Justin Dossey,[email protected]
• 3.6 How To Upgrade Sendmail
• 3.7 Some tips for new sysadmins.
• 3.8 How to configure xdm's chooser for host selection. Arrigo Triulzi,[email protected]

1.Introduction
Welcome to the Linux Tips HOWTO, a list of neato tricks and optimizations that make Linux more fun. All
I have in here right now are tips off of the top of my head, and tips from the old Tips−HOWTO (Why take
out decent tips, right?). So send all your favorite hints and tips to me so I can put them in the next
Tips−HOWTO.

Paul Anderson Maintainer−−Linux TIPS HOWTO

[email protected]

2.Short Tips

2.1 Handy Syslog Trick Paul Anderson, Tips−HOWTO

maintainer
Edit your /etc/syslog.conf, and put in the following line:

# Dump everything on tty8

*.* /dev/tty8

One caveat: REMEMBER TO USE TABS! syslog doesn't like spaces...

3.Detailed Tips 2
 The Linux Tips HOWTO

2.2 Script to view those compressed HOWTOs. Didier

Juges,[email protected]

From a newbie to another, here is a short script that eases looking for and viewing howto documents. My
howto's are in /usr/doc/faq/howto/ and are gzipped. The file names are XXX−HOWTO.gz, XXX being the
subject. I created the following script called "howto" in the /usr/local/sbin directory:

#!/bin/sh
if [ "$1" = "" ]; then
ls /usr/doc/faq/howto | less
else
gunzip −c /usr/doc/faq/howto/$1−HOWTO.gz | less
fi

When called without argument, it displays a directory of the available howto's. Then when entered with the
first part of the file name (before the hyphen) as an argument, it unzips (keeping the original intact) then
displays the document.

For instance, to view the Serial−HOWTO.gz document, enter:

$ howto Serial

2.3 Is there enough free space??? Hans

Zoebelein,[email protected]
Here comes a short script which will check from time to time that there is enough free space available on
anything which shows up in mount (disks, cdrom, floppy...)

If space runs out, a message is printed every X seconds to the screen and 1 mail message per filled device is
fired up.

#!/bin/sh

#
# $Id: check_hdspace,v 1.18 1996/12/11 22:33:29 root Exp root $
#

#
# Since I got mysterious error messages during compile when
# tmp files filled up my disks, I wrote this to get a warning
# before disks are full.
#
# If this stuff saved your servers from exploding,
# send praising email to [email protected].

2.2 Script to view those compressed HOWTOs. Didier Juges,[email protected] 3

 The Linux Tips HOWTO

# If your site burns down because of this, sorry but I

# warned you: no comps.
# If you really know how to handle sed, please forgive me :)
#

#
# Shoot and forget: Put 'check_hdspace &' in rc.local.
# Checks for free space on devices every $SLEEPTIME sec.
# You even might check your floppies or tape drives. :)
# If free space is below $MINFREE (kb), it will echo a warning
# and send one mail for each triggering device to $MAIL_TO_ME.
# If there is more free space than trigger limit again,
# mail action is also armed again.
#

# TODO: Different $MINFREE for each device.

# Free /*tmp dirs securely from old junk stuff if no more free space.

DEVICES='/dev/sda2 /dev/sda8 /dev/sda9' # device; your put disks here

MINFREE=20480 # kb; below this do warning
SLEEPTIME=10 # sec; sleep between checks
MAIL_TO_ME='root@localhost' # fool; to whom mail warning

# −−−−−−− no changes needed below this line (hopefully :) −−−−−−−

MINMB=0
ISFREE=0
MAILED=""
let MINMB=$MINFREE/1024 # yep, we are strict :)

while [ 1 ]; do
DF="`/bin/df`"
for DEVICE in $DEVICES ; do
ISFREE=`echo $DF | sed s#.\*$DEVICE" "\*[0−9]\*""\*[0−9]\*" "\*## | sed s#"

if [ $ISFREE −le $MINFREE ] ; then

let ISMB=$ISFREE/1024
echo "WARNING: $DEVICE only $ISMB mb free." >&2
#echo "more stuff here" >&2
echo −e "\a\a\a\a"

if [ −z "`echo $MAILED | grep −w $DEVICE`" ] ; then

echo "WARNING: $DEVICE only $ISMB mb free. (Trigger is
| mail −s "WARNING: $DEVICE only $ISMB mb free!" $MAIL_TO_M
MAILEDH="$MAILED $DEVICE"
MAILED=$MAILEDH
# put further action here like cleaning
# up */tmp dirs...
fi
elif [ −n "`echo $MAILED | grep −w $DEVICE`" ] ; then
# Remove mailed marker if enough disk space
# again. So we are ready for new mailing action.
MAILEDH="`echo $MAILED | sed s#$DEVICE##`"
MAILED=$MAILEDH
fi

done
sleep $SLEEPTIME

done

2.2 Script to view those compressed HOWTOs. Didier Juges,[email protected] 4

 The Linux Tips HOWTO

2.4 Util to clean up your logfiles. Paul Anderson,

Tips−HOWTO Maintainer>
If you're like me, you have a list with 430 subscribers, plus 100+ messages per day coming in over UUCP.
Well, what's a hacker to do with these huge logs? Install chklogs, that's what. Chklogs is written by Emilio
Grimaldo, [email protected], and the current version 1.8 available from
ftp.iaehv.nl:/pub/users/grimaldo/chklogs−1.8.tar.gz. It's pretty self explanatory to install(you will, of course,
check out the info in the doc subdirectory). Once you've got it installed, add a crontab entry like this:

# Run chklogs at 9:00PM daily.

00 21 * * * /usr/local/sbin/chklogs −m

While you're at it, mention to the author how nice a peice of software this is:)

2.5 Handy Script to Clean Up Corefiles. Otto

Hammersmith,ohammers@cu−online.com
Create a file called rmcores(the author calls it handle−cores) with the following in it:

#!/bin/sh
USAGE="$0 <directory> <message−file>"

if [ $# != 2 ] ; then
echo $USAGE
exit
fi

echo Deleting...
find $1 −name core −atime 7 −print −type f −exec rm {} \;

echo e−mailing
for name in `find $1 −name core −exec ls −l {} \; | cut −c16−24`
do
echo $name
cat $2 | mail $name
done

And have a cron job run it every so often.

2.4 Util to clean up your logfiles. Paul Anderson, Tips−HOWTO Maintainer> 5

 The Linux Tips HOWTO

2.6 Moving directories between filesystems. Alan

Cox,[email protected]
Quick way to move an entire tree of files from one disk to another

(cd /source/directory && tar cf − . ) | (cd /dest/directory && tar xvfp −)

[ Change from cd /source/directory; tar....etc. to prevent possibility of trashing directory in case of disaster.
Thanks to Jim Dennis, [email protected], for letting me know. −Maint. ]

2.7 Finding out which directories are the largest. Mick

Ghazey,[email protected]
Ever wondered which directories are the biggest on your computer? Here's how to find out.

du −S | sort −n

2.8 The Linux Gazette

Kudos go to John Fisk, creator of the Linux Gazette. This is an excellent e−zine plus, it's FREE!!! Now what
more could you ask? Check it out at:

http://www.linuxgazette.com

BTW, It turns out that (1) LG is now out on a monthly basis, and (2) John Fisk no longer maintains it, the
fellows at SSC do.

2.9 Pointer to patch for GNU Make 3.70 to change VPATH

behavior.Ted Stern,[email protected]
I don't know if many people have this problem, but there is a "feature" of GNU make version 3.70 that I don't
like. It is that VPATH acts funny if you give it an absolute pathname. There is an extremely solid patch that
fixes this, which you can get from Paul D. Smith <[email protected]>. He also posts the
documentation and patch after every revision of GNU make on the newsgroup "gnu.utils.bug" Generally, I
apply this patch and recompile gmake on every system I have access to.

2.6 Moving directories between filesystems. Alan Cox,[email protected] 6

 The Linux Tips HOWTO

2.10 How do I stop my system from fscking on each

reboot? Dale Lutz,[email protected]
Q: How do I stop e2fsck from checking my disk every time I boot up.

A: When you rebuild the kernel, the filesystem is marked as 'dirty' and so your disk will be checked with each
boot. The fix is to run:

rdev −R /zImage 1

This fixes the kernel so that it is no longer convinced that the filesystem is dirty.

Note: If using lilo, then add read−onlyto your linux setup in your lilo config file (Usually /etc/lilo.conf)

2.11 How to avoid fscks caused by "device busy" at reboot

time. Jon Tombs,[email protected]
If you often get device busy errors on shutdown that leave the filesystem in need of an fsck upon reboot, here
is a simple fix:

To /etc/rc.d/init.d/halt or /etc/rc.d/rc.0, add the line

mount −o remount,ro /mount.dir

for all your mounted filesystems except /, before the call to umount −a. This means if, for some reason,
shutdown fails to kill all processes and umount the disks they will still be clean on reboot. Saves a lot of time
at reboot for me.

2.12 How to find the biggest files on your hard−drive.

Simon Amor,[email protected]

ls −l | sort +4n

Or, for those of you really scrunched for space this takes awhile but works great:

cd /
ls −lR | sort +4n

2.10 How do I stop my system from fscking on each reboot? Dale Lutz,[email protected] 7
 The Linux Tips HOWTO

2.13 How to print pages with a margin for hole punching.

Mike Dickey,[email protected]

#!/bin/sh
# /usr/local/bin/print
# a simple formatted printout, to enable someone to
# 3−hole punch the output and put it in a binder

cat $1 | pr −t −o 5 −w 85 | lpr

2.14 A way to search through trees of files for a particular

regular expression.Raul Deluth
Miller,[email protected]
I call this script 'forall'. Use it like this:

forall /usr/include grep −i ioctl

forall /usr/man grep ioctl

Here's forall:

#!/bin/sh
if [ 1 = `expr 2 \> $#` ]
then
echo Usage: $0 dir cmd [optargs]
exit 1
fi
dir=$1
shift
find $dir −type f −print | xargs "$@"

2.15 A script for cleaning up after programs that create

autosave and backup files.Barry
Tolnas,[email protected]
Here is a simple two−liner which recursively descends a directory hierarchy removing emacs auto−save (#)
and backup (~) files, .o files, and TeX .log files. It also compresses .tex files and README files. I call it
'squeeze' on my system.

2.13 How to print pages with a margin for hole punching. Mike Dickey,[email protected]
8
 The Linux Tips HOWTO

#!/bin/sh
#SQUEEZE removes unnecessary files and compresses .tex and README files
#By Barry tolnas, [email protected]
#
echo squeezing $PWD
find $PWD \( −name \*~ −or −name \*.o −or −name \*.log −or −name \*\#\) −exec
rm −f {} \;
find $PWD \( −name \*.tex −or −name \*README\* −or −name \*readme\* \) −exec gzip −9 {} \;

2.16 How to find out what process is eating the most

memory. Simon Amor,[email protected]

ps −aux | sort +4n

−OR−

ps −aux | sort +5n

2.17 Rigging vi for C programming, Paul

Anderson,Tips−HOWTO Maintainer
I do a lot of C programming in my spare time, and I've taken the time to rig vi to be C friendly. Here's my
.exrc:

set autoindent
set shiftwidth=4
set backspace=2
set ruler

What does this do? autoindent causes vi to automatically indent each line following the first one indented,
shiftwidth sets the distance of ^T to 4 spaces, backspace sets the backspace mode, and ruler makes it display
the line number. Remember, to go to a specific line number, say 20, use:

vi +20 myfile.c

2.16 How to find out what process is eating the most memory. Simon Amor,[email protected] 9
 The Linux Tips HOWTO

2.18 Using ctags to ease programming.

Most hackers already have ctags on their computers, but don't use it. It can be very handy for editing specific
functions. Suppose you have a function, in one of many source files in a directory for a program you're
writing, and you want to edit this function for updates. We'll call this function foo(). You don't where it is in
the source file, either. This is where ctags comes in handy. When run, ctags produces a file named tags in the
current dir, which is a listing of all the functions, which files they're in and where they are in said files. The
tags file looks like this:

ActiveIconManager iconmgr.c /^void ActiveIconManager(active)$/

AddDefaultBindings add_window.c /^AddDefaultBindings ()$/
AddEndResize resize.c /^AddEndResize(tmp_win)$/
AddFuncButton menus.c /^Bool AddFuncButton (num, cont, mods, func, menu, item)$/
AddFuncKey menus.c /^Bool AddFuncKey (name, cont, mods, func, menu, win_name, action)$
AddIconManager iconmgr.c /^WList *AddIconManager(tmp_win)$/
AddIconRegion icons.c /^AddIconRegion(geom, grav1, grav2, stepx, stepy)$/
AddStartResize resize.c /^AddStartResize(tmp_win, x, y, w, h)$/
AddToClientsList workmgr.c /^void AddToClientsList (workspace, client)$/
AddToList list.c /^AddToList(list_head, name, ptr)$/

To edit, say AddEndResize() in vim, run:

vim −t AddEndResize

This will bring the appropriate file up in the editor, with the cursor located at the beginning of the function.

2.19 Why does sendmail hang for 5 minutes on startup with

RedHat? Paul Anderson,[email protected]
This is a fairly common problem, almost to the point of being a FAQ. I don't know if RedHat has fixed this
bug in their distribution, but you can repair it yourself. If you look in your /etc/hosts file, you will find it
looks something like:

127.0.0.1 localhost yourbox

When sendmail starts, it does a lookup on your hostname(in this example, yourbox). It then finds that the IP
for yourbox is 127.0.0.1, sendmail doesn't like this, so it does the lookup again. It continues with this for a
while until it eventually gives up and exits. Fixing the problem is extremely easy, edit your /etc/hosts file and

2.18 Using ctags to ease programming. 10

 The Linux Tips HOWTO

change it to something like this:

127.0.0.1 localhost
10.56.142.1 yourbox

2.20 How do I configure RedHat for using color−ls? Paul

Anderson,[email protected]
RedHat's distribution comes with color−ls, however why they don't configure it for colour use by default is
beyond me. Here's to fix it.

First, type eval `DIRCOLORS`

Next, alias ls='ls −−color=auto'

And put the 'alias.....' in your /etc/bashrc

2.21 How do I find which library in /usr/lib holds a certain

function? Pawel Veselow,[email protected]
What if you're compiling and you've missed a library that needed linking in? All gcc reports are function
names... Here's a simple command that'll find what you're looking for:

for i in *; do echo $i:;nm $i|grep tgetnum 2>/dev/null;done

Where tgetnum is the name of the function you're looking for.

2.22 I compiled a small test program in C, but when I run it,

I get no output!
You probably compiled the program into a binary named test, didn't you? Linux has a program called test,
which tests if a certain condition is true, it never produces any output on the screen. Instead of just typing test,
try: ./test

2.20 How do I configure RedHat for using color−ls? Paul Anderson,[email protected] 11

 The Linux Tips HOWTO

3.Detailed Tips

3.1 Sharing swap partitions between Linux and Windows.

Tony Acero,[email protected]

1. Format the partition as a dos partition, and create the Windows swap file on it, but don't run windows
yet. (You want to keep the swap file completely empty for now, so that it compresses well).
2. Boot linux and save the partition into a file. For example if the partition was /dev/hda8:

dd if=/dev/hda8 of=/etc/dosswap

3. Compress the dosswap file; since it is virtually all 0's it will compress very well

gzip −9 /etc/dosswap

4. Add the following to the /etc/rc file to prepare and install the swap space under Linux: XXXXX is the
number of blocks in the swap partition

mkswap /dev/hda8 XXXXX

swapon −av

Make sure you add an entry for the swap partition in your /etc/fstab file
5. If your init/reboot package supports /etc/brc or /sbin/brc add the following to /etc/brc, else do this by
hand when you want to boot to dos|os/2 and you want to convert the swap partition back to the
dos/windows version:

swapoff −av
zcat /etc/dosswap.gz | dd of=/dev/hda8 bs=1k count=100

# Note that this only writes the first 100 blocks back to the partition. I've found empirically that this is
sufficient

>> What are the pros and cons of doing this?

Pros: you save a substantial amount of disk space.

Cons: if step 5 is not automatic, you have to remember to do it by hand, and it slows the reboot process by a
nanosecond :−)

3.Detailed Tips 12
 The Linux Tips HOWTO

3.2 Desperate Undelete. Michael

Hamilton,[email protected]
Here's a trick I've had to use a few times.

Desperate person's text file undelete.

If you accidentally remove a text file, for example, some email, or the results of a late night programming
session, all may not be lost. If the file ever made it to disk, ie it was around for more than 30 seconds, its
contents may still be in the disk partition.

You can use the grep command to search the raw disk partition for the contents of file.

For example, recently, I accidentally deleted a piece of email. So I immediately ceased any activity that could
modify that partition: in this case I just refrained from saving any files or doing any compiles etc. On other
occasions, I've actually gone to the trouble of bring the system down to single user mode, and unmounted the
filesystem.

I then used the egrep command on the disk partition: in my case the email message was in
/usr/local/home/michael/, so from the output from df, I could see this was in /dev/hdb5

sputnik3:~ % df
Filesystem 1024−blocks Used Available Capacity Mounted on
/dev/hda3 18621 9759 7901 55% /
/dev/hdb3 308852 258443 34458 88% /usr
/dev/hdb5 466896 407062 35720 92% /usr/local

sputnik3:~ % su
Password:
[michael@sputnik3 michael]# egrep −50 'ftp.+COL' /dev/hdb5 > /tmp/x

Now I'm ultra careful when fooling around with disk partitions, so I paused to make sure I understood the
command syntax BEFORE pressing return. In this case the email contained the word 'ftp' followed by some
text followed by the word 'COL'. The message was about 20 lines long, so I used −50 to get all the lines
around the phrase. In the past I've used −3000 to make sure I got all the lines of some source code. I directed
the output from the egrep to a different disk partition − this prevented it from over writing the message I was
looking for.

I then used strings to help me inspect the output

strings /tmp/x | less

Sure enough the email was in there.

This method can't be relied on, all, or some, of the disk space may have already been re−used.

This trick is probably only useful on single user systems. On multi−users systems with high disk activity, the
space you free'ed up may have already been reused. And most of use can't just rip the box out from under our

3.2 Desperate Undelete. Michael Hamilton,[email protected] 13

 The Linux Tips HOWTO

users when ever we need to recover a file.

On my home system this trick has come in handy on about three occasions in the past few years − usually
when I accidentally trash some of the days work. If what I'm working survives to a point where I feel I made
significant progress, it get's backed up onto floppy, so I haven't needed this trick very often.

3.3 How to use the immutable flag. Jim

Dennis,[email protected]
Use the Immutable Flag

Right after you install and configure your system go through the /bin, /sbin/, /usr/bin, /usr/sbin and /usr/lib
(and a few of the other usual suspects and make liberal use of the 'chattr +i command'. Also add that to the
the kernel files in root. Now 'mkdir /etc/.dist/' copy everything from /etc/ on down (I do this in two steps
using /tmp/etcdist.tar to avoid recursion) into that directory. (Optionally you can just create /etc/.dist.tar.gz)
−− and mark that as immutable.

The reason for all of this is to limit the damage that you can do when logged in as root. You won't overwrite
files with a stray redirection operator, and you won't make the system unusable with a stray space in an 'rm
−fr' command (you might still do alot of damage to your data −− but your libs and bins will be safer.

This also makes a variety of security and denial of service exploits either impossible or more difficult (since
many of them rely on overwriting a file through the actions of some SUID program that *isn't providing an
arbitrary shell command*).

The only inconvenience of this is when building and doing your 'make install' on various sorts of system
binaries. On the other hand it also prevents the 'make install' from over−writing the files. When you forget to
read the Makefile and chattr −i the files that are to be overwritten (and the directories to which you want to
add files) −− the make fails, you just use the chattr command and rerun it. You can also take that opportunity
to move your old bin's, libs, or whatever into a .old/ directory or rename or tar them or whatever.

3.4 A suggestion for where to put new stuff.Jim

Dennis,[email protected]
All new stuff starts under /usr/local! or /usr/local/`hostname`

If your distribution is one that leaves /usr/local empty then just create your /usr/local/src, /usr/local/bin etc
and use that. If your distribution puts things in the /usr/local tree than you may want to 'mkdir
/usr/local/`hostname`' and give the 'wheel' group +w to it (I also make it SUID and SGID to insure that each
member of the wheel group can only mess with their own files thereunder, and that all files created will
belong to the 'wheel' group.

Now discipline yourself to *ALWAYS! ALWAYS! ALWAYS!* put new packages under
/usr/local/src/.from/$WHEREVER_I_GOT_IT/ (for the .tar or whatever files) and build them under

3.3 How to use the immutable flag. Jim Dennis,[email protected] 14

 The Linux Tips HOWTO

/usr/local/src (or .../$HOSTNAME/src). Make sure that it installs under the local hierarchy. If it *absolutely
must* be installed back in /bin or /usr/bin or somewhere else −− put a symlink from the local heirarchy to
each element that when anywhere else.

The reason for this −− even though it's more work −− is that it helps isolate what has to be backed up and
restored or reinstalled in the event of a full re−install from the distribution medio (usually CD these days). By
using a /usr/local/.from directory you also keep an informal log of where your sources are coming from −−
which helps when you're looking for new updates −− and may be critical when monitoring the security
announcement lists.

One of my systems at home (the one I'm calling from) was put together before I adopted these policies for
myself. I still don't "know" all the ways that it differs from the stock "as installed" system. This is despite the
fact that I've done very little with my home system's configuration and I'm the *only* person who ever uses
it.

By contrast the systems I've set up at work (when I was thrust into the role of system administrator there)
have all been configured this way −− have been administered by many contractors and other MIS people, and
have had a large number of upgrades and package installations. Nonetheless I have a very good idea which
precise elements were put in *after* the initial installation and configuration.

3.5 Converting all files in a directory to lowercase. Justin

Dossey,[email protected]

I noticed a few overly difficult or unnecessary procedures recommended in the 2c tips section of Issue 12.
Since there is more than one, I'm sending it to you:

#!/bin/sh
# lowerit
# convert all file names in the current directory to lower case
# only operates on plain files−−does not change the name of directories
# will ask for verification before overwriting an existing file
for x in `ls`
do
if [ ! −f $x ]; then
continue
fi
lc=`echo $x | tr '[A−Z]' '[a−z]'`
if [ $lc != $x ]; then
mv −i $x $lc
fi
done

Wow. That's a long script. I wouldn't write a script to do that; instead, I would use this command:

for i in * ; do [ −f $i ] && mv −i $i `echo $i | tr '[A−Z]' '[a−z]'`;

done;

3.5 Converting all files in a directory to lowercase. Justin Dossey,[email protected] 15

 The Linux Tips HOWTO

on the command line.

The contributor says he wrote the script how he did for understandability (see below).

On the next tip, this one about adding and removing users, Geoff is doing fine until that last step. Reboot?
Boy, I hope he doesn't reboot every time he removes a user. All you have to do is the first two steps. What
sort of processes would that user have going, anyway? An irc bot? Killing the processes with a simple

kill −9 `ps −aux |grep ^<username> |tr −s " " |cut −d " " −f2`

Example, username is foo

kill −9 `ps −aux |grep ^foo |tr −s " " |cut −d " " −f2`

That taken care of, let us move to the forgotten root password.

The solution given in the Gazette is the most universal one, but not the easiest one. With both LILO and
loadlin, one may provide the boot parameter "single" to boot directly into the default shell with no login or
password prompt. From there, one may change or remove any passwords before typing "init 3" to start
multiuser mode. Number of reboots: 1 The other way Number of reboots: 2

Justin Dossey

3.6 How To Upgrade SendmailPaul

Anderson,[email protected]
We're starting from raw, clean source. First, obtain the sendmail source code. I've d/led version 8.9.0, which
is, as you will notice, bleeding edge. I grabbed it from ftp.sendmail.org:/pub/sendmail/sendmail.8.9.0.tar.gz

It's about 1Meg, and considering I'm running 8.7.6, I think it's worth the effort. If this works, you'll
undoubtedly hear about it, elsewise I can't get the new HOWTO versions out without e−mail:)

Now, once you've got the source d/led, unpack it. It'll create a dir called sendmail−8.9.0 in the current
directory. Change into that directory, read the README and RELEASE_NOTES files(and be amazed at the
updates they've done). Now, cd in src. This is where most of your work will be done.

A quick note: Sendmail is a small, powerful and well−written program. The sendmail binary itself compiled
in less than 5 minutes on my 5x86 133 with 32Megs RAM! The entire compile and install(sans config) took
under 15 minutes!

I don't normally run BIND on my system, so I found the lines:

# ifndef NAMED_BIND

3.6 How To Upgrade SendmailPaul Anderson,[email protected] 16

 The Linux Tips HOWTO

# define NAMED_BIND 1 /* use Berkeley Internet Domain Server */

# endif

and changed the 1 to a 0, ala:

# ifndef NAMED_BIND
# define NAMED_BIND 0 /* use Berkeley Internet Domain Server */
# endif

On Debian 1.3.1, db.h is by default installed in /usr/include/db, instead of /usr/include, where sendmail hopes
to find it. Change to the src, mailstats, makemap, praliases, rmail and smrsh directories and execute the
following command:

./Build −I/usr/include/db

Once you've done that, cd .. and type make install. There! Sendmail version 8.9.0 should now be installed!
This is, of course, assuming you already have your original configuration. For everything to work smoothly
on my system, since I host free mailing lists for people using majordomo, I had to add the following to the
beginning of my /etc/sendmail.cf:

O DontBlameSendmail=forwardfileinunsafedirpath, forwardfileinunsafedirpathsafe

Sendmail 8.9.0 is rather pedantic about directory and file permissions these days, and will complain about
dirs and files in aliases or .forward files that are group or world writeable. While it's not a good idea to
disable this pedantry, I am only running with a single person at the console and I felt it was okay to allow this
minor security hole. YMMV.

3.7 Some tips for new sysadmins.Jim

Dennis,[email protected]
Create and maintain a /README.`hostname` and/or a /etc/README.`hostname` [Or possibly
/usr/local/etc/README.`hostname` −Maint. ]

3.7 Some tips for new sysadmins.Jim Dennis,[email protected] 17

 The Linux Tips HOWTO

Absolutely, from *day one* of administering a system take notes in an online log file. You might make "vi
/README.$(hostname)" a line in root's /bash_logout. Another way to do this is to write an su or a sudo
script that does something like:

function exit \
{ unset exit; exit; \
cat ~/tmp/session.$(date +%y%m%d) \
>> /README.$(hostname) && \
vi /README.$(hostname)
}
script −a ~/tmp/session.$(date +%y%m%d)
/bin/su.org −

(use the typescript command to create a session log and create a function to automate appending and updating
the log).

I'll admit that I haven't implemented this automation of policy −− I've just relied on self−discipline so far.
However I have been toying with the idea (even to the point of prototyping the scripts and shell functions as
you see them). One thing that holds me back on this is the 'script' command itself. I think I'll have to grab the
sources and add a couple of command line parameters (to pause/stop the script recording from the command
line) before I commit to using this).

My last suggestion (for this round):

Root's path should consist of 'PATH= /bin'

That's it. Nothing else on root's path. Everything root does is provided by a symlink from /bin or by an alias
or shell function, or is a script or binary in /bin, or is typed out with an explicit path.

This makes anyone running as root aware (sometimes painfully so) of how he or she is trusting binaries. The
wise admin of a multi−user host will periodically look through his or here /bin and /.*history files to look
for patterns and loopholes.

The really motivated admin will spot sequences that can be automated, places where sanity checks can be
inserted, and tasks for which "root" privileges should be temporarily eschewed (launching editors, MTA's and
other large interactive programs with elaborate scripting features that *might* be embedded in transparent or
data files −− like the infamous vi ./.exrc and emacs ./.emacs and the even more insidous $EXINIT and the
embedded header/footer macros). Naturally those sorts of commands can be run with something like:

cp $data $some_users_home/tmp
su −c $origcommand $whatever_switches
cp $some_users_home/tmp $data

(...where the specifics depend on the command).

Mostly these last sorts of precautions are overboard for the home or "single" user workstation −− but they are
very good policy the admin of a multi−user −− particular a publicly exposed system (like the one's at
netcom).

3.7 Some tips for new sysadmins.Jim Dennis,[email protected] 18

 The Linux Tips HOWTO

3.8 How to configure xdm's chooser for host selection.

Arrigo Triulzi,[email protected]

1. Edit the file that launches xdm most likely /etc/rc/rc.6 or /etc/rc.local) so that it contains the
following lines in the xdm startup section.

/usr/bin/X11/xdm
exec /usr/bin/X11/X −indirect hostname

2. Edit /usr/lib/X11/xdm/Xservers and comment out the line which starts the server on the local
machine (i.e. starting 0:)
3. Reboot the machine and you're home and away.

I add this because when I was, desperately, trying to set it up for my own subnet over here it took me about a
week to suss out all the problems.

Caveat: with old SLS (1.1.1) for some reason you can leave a −nodaemon after the xdm line −− this does
NOT work for later releases.

3.8 How to configure xdm's chooser for host selection. Arrigo Triulzi,[email protected] 19