Scribd
Upload
110 views

ICU Patient Monitoring System With Automatic SMS System Using GSMZIGBEE Wireless Technology

The document describes an ICU patient monitoring system that uses wireless technology to continuously display a patient's heartbeat on a graphical LCD display and send SMS alerts via GSM. The system uses a heart rate sensor consisting of an LED and LDR circuit to detect blood circulation and calculate heart rate. The microcontroller interfaces with the sensor and displays the heart rate on the LCD. It can also send SMS alerts through GSM when necessary to efficiently provide medical services to patients in a timely manner.

Uploaded by

RambhupalReddy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
110 views

ICU Patient Monitoring System With Automatic SMS System Using GSMZIGBEE Wireless Technology

The document describes an ICU patient monitoring system that uses wireless technology to continuously display a patient's heartbeat on a graphical LCD display and send SMS alerts via GSM. The system uses a heart rate sensor consisting of an LED and LDR circuit to detect blood circulation and calculate heart rate. The microcontroller interfaces with the sensor and displays the heart rate on the LCD. It can also send SMS alerts through GSM when necessary to efficiently provide medical services to patients in a timely manner.

Uploaded by

RambhupalReddy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

ICU Patient Monitoring System with Automatic SMS system using

GSM / ZIGBEE wireless Technology.


The project aims in designing a system which is capable of continuously
displaying the heart beat of a person on GLCD. Technology is being used everywhere in
our daily life to fulfill our requirements. We are employing different sensors for different
applications sometimes we may even use same sensors differently for different
applications. Whatever it may be the final output is life has increased its speed with the
technology boosters. We can not only increase the speed of life but also increase security
with good ideas to make use of this technology. One of the ideal ways of using
technology is to employ it to sense serious health problems so that efficient medical
services can be provided to the patient in correct time. This idea to provide efficient
health service to patients has given birth to the project heart beat monitoring system with
voice alerts and display on LCD.
Heart beat monitor and display system is a portable and a best replacement for the old
model stethoscope which is less efficient. The heart beat rate is calculated manually using
stethoscope where the probability of error is high because the heart beat rate lies in the
range of 70 to 90 per minute whose occurrence is less than 1 sec, so this device can be
considered as a very good alternative instead of a stethoscope.
The functioning of this device is based on the truth that the blood circulates for every one
heart beat which can be sensed by using a circuit formed by the combination of an LDR
and LED. Depending upon the rate of circulation of blood per second the heart beat rate
per minute is calculated. This device consists of a micro controller which takes the input
from the heart beat sensor and calculates the heart rate of the patient. The micro
controller also takes the responsibility to display the same on the Graphical LCD which is
interfaced to it through LCD drivers.

The main objective of this project is:


1. Monitoring the heart beat.
2. Produces voice based alerts whenever necessary.
The project provides learnings on the fallowing
advancements:
1. Developing a sensor based on LED and LDR.
2. LDR characteristics.
3. Design of voice based IC circuit.
4. Conversion of AC supply to DC supply.
5. Embedded C programming.
6. PCB design.
The major building blocks of this project are:
1.
2.
3.
4.
5.
6.
7.

Regulated power supply.


Micro controller.
Heart beat sensor.
Reset.
Graphical LCD
Crystal oscillator.
LED indicators.

Regulated Power Supply:

BLOCK DIAGRAM :

Max232

POM

MICROCONTROLLER

AT89S52
RPS

GLCD
Crystal

GSM

You might also like