Scribd
Upload
52 views

Systems and Processes

The document discusses different types of systems and processes in thermodynamics. A system is the part of the universe being studied, while a process describes changes within the system. The surroundings are everything outside the system boundary. Systems can be homogeneous, with uniform properties throughout, or heterogeneous with distinct phases and discontinuities at boundaries. Closed systems exchange energy but not matter, while open systems exchange both. Isolated systems are unaffected by their environment.

Uploaded by

jokish
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
52 views

Systems and Processes

The document discusses different types of systems and processes in thermodynamics. A system is the part of the universe being studied, while a process describes changes within the system. The surroundings are everything outside the system boundary. Systems can be homogeneous, with uniform properties throughout, or heterogeneous with distinct phases and discontinuities at boundaries. Closed systems exchange energy but not matter, while open systems exchange both. Isolated systems are unaffected by their environment.

Uploaded by

jokish
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Systems and Processes

System. In thermodynamics, a substance or group of


substances in which we have special interest is called a
system. It is that part of the universe which is set apart for
our special consideration. It may be a reaction vessel, a
distillation column, or a heat engine.
Process. The changes taking place within the system is
referred to as a process. Thus, hydrocarbon fuel and oxygen
in a combustion chamber constitute the system and the
combustion of fuel to form water and carbon dioxide
constitutes a process.
Surroundings. The part of the universe outside the system
and separated from the system by boundaries is called
surroundings. The boundaries may be either physical or
imaginary; they may be rigid or movable. For practical
reasons, the surroundings are usually restricted to that
portion of the universe which is in the immediate vicinity of
the system and are affected by changes occurring in the
system. For example, when the steam condensing in a shelland-tube heat exchanger is treated as the system, the
cooling water to which the latent heat of vaporisation is
transferred may be treated as the surroundings.

Homogeneous and Heterogeneous Systems

Homogeneous system. This system is also called a phase.


Here the properties are the same throughout or the
properties vary smoothly without showing any surface of
discontinuity. Liquid water in a beaker and a column of dustfree air above the earths surface are examples of
homogeneous system.
Heterogeneous system. This is a system which consists of
two or more distinct homogeneous regions or phases. There
is a sudden change in properties at the phase boundaries. A
liquid mixture of benzene and water forms a heterogeneous
system made up of two immiscible liquid phases. Water and
water vapour taken in a closed container is another example
of a heterogeneous system. Systems consisting of only gases

and vapours are always homogeneous. With liquids, two


phases are common, and with solids any number of different
phases are possible.

Closed and Open Systems

Closed system and open system. Systems that can


exchange energy with the surroundings but which cannot
transfer matter across the boundaries are known as closed
systems. Open systems, on the other hand, can exchange
both energy and matter with their environment. In a
multiphase system, each phase is open since material is free
to enter and leave each phase, although the system as a
whole may be closed to the flow of matter. A batch reactor is
a closed system while a tubular flow reactor is an open
system. Cyclical processes, like power and refrigeration
cycles are closed systems when considered as a whole,
whereas each component of the cycle such as compressor,
pump, and heat exchanger is open.
Isolated system. This is a system, which is totally
unaffected by the changes in its environment. Neither energy
nor matter can cross the boundaries of an isolated system. A
closed system is thermally isolated, when the enclosing walls
are impervious to the flow of heat; it is mechanically isolated,
when enclosed by rigid walls, and is completely isolated,
when neither material nor energy in any form can be added
to it or removed from it. A perfectly isolated system is an
ideal concept that cannot be attained in practice. The system
and surroundings considered together constitute an isolated
system. Thus, the universe can be treated as an isolated
system.

You might also like