MILITARY INSTITUTE OF SCIENCE AND TECHNOLOGY (MIST)

COURSE OUTLINES FOR MASTER DEGREE PROGRAM IN CIVIL ENGINEERING

Introduction

1. Civil Engineering (CE) Department is the pioneer department of MIST. 10th batch of
undergraduate CE students have already graduated on 06 March 2012. Graduate students from this
institute are proving their worth in the fields of higher studies and professional assignments both at
Govt. and private sectors. It may be mentioned that this institute possesses the required facilities for
both infrastructural and academic to meet the requisite criteria of a technical education centre.

2. Research and higher studies are the prime requirements of an educational institute. With this
end in view, in the 12th Meeting (25 November 2010) of ‘Council of MIST’ a decision was taken to
introduce M.Sc. in CE program at MIST and appoint senior experienced teachers of the related field
on contractual basis. 36th Meeting of ‘Academic Council’ of MIST on 21 April 2011 accepted
initially ‘Structure’ and ‘Transportation’ division for the program. As a follow-on program, M.Sc. in
Geotechnical Engg, Environmental Engg and Water Resources Engg shall also be introduced in the
forthcoming sessions. Bangladesh University of Professionals (BUP) has published the ‘Committee
of Courses’ on 09 October 2011 and amended the same on 18 January 2012 for finalizing the courses
curriculum. This committee is presided over by the Head, CE Dept. of MIST along with three
internal members and four external members from BUET.

3. In the 13th Meeting of ‘Council of MIST’ on 20 November 2011, the matter was again
deliberately discussed and decision was taken to launch the M.Sc. in CE Program from 2012.
Financial involvement and other administrative issues were also finalized in the meeting. Two retired
senior professors of BUET (1xStructure & 1xTransportation) have already been appointed for the
session 2012 with effect from 29 January 2012. Presently they are also conducting undergraduate
courses in MIST.

Scope

4. The proceedings of the committee of courses will include the following:

a. General Overview of Master Degree Programme.

b. List of Courses and Course Codes. Maximum courses are included in the proceedings
keeping in mind that in future with the availability of experienced and capable teachers,
course options can be wide and open. Courses of following fields are included:

(1) General Division.

(2) Structural Division.

(3) Environment Division

(4) Geotechnical Division

(5) Transportation Division.

1
 c. Detail Contents of Masters/Postgraduate Courses:

(1) General Division.

(2) Structural Division.

(3) Environment Division

(4) Geotechnical Division

(5) Transportation Division.

d. Ordinance for Masters/Postgraduate Programmes.

5. General Overview of Master Degree Programme. All enrolled students for the M.Sc.
Programme shall have to complete minimum 36 credit hours that will include 18 credit hours of
theory courses and 18 credit hours of thesis. For M.Engg Programme, the students shall have to
complete 27 credit hours of theory and 9 credit hours of thesis/project. Students of both the
programmes need to earn minimum CGPA of 2.65 in the theory courses and complete the
thesis/project satisfactorily under the supervision of a designated supervisor within the stipulated
time duration. All the theory courses will be of three credit hours i.e. three hours of engagement in a
week with a total of 14 weeks in a semester. Students may enroll as full time or part time. For full
time, a student needs to take minimum 12 credits to maximum 15 credits in a semester whereas a
part time student can take three to nine credits in a semester. Student enrolled for a particular
division is expected to take theory courses from his own division. However, students are also
allowed to register some of the courses from rest of the divisions. Detail guidelines and requirements
are enumerated in the ordinance for the master/postgraduate programme attached with this
proceeding.

6. List of Masters/Postgraduate Courses

a. General Division.

CE 6011 Boundary Element Method

CE 6012 Statistics in Civil Engineering

b. Structural Division.

CE 6101 Theory of Elasticity

CE 6103 Theory of Plates
CE 6105 Plastic Design of Structures
CE 6106 Elastic Stability of Structures
CE 6108 Analysis and Design of Shells
CE 6109 Finite Element Methods I
CE 6111 Advanced Design of Concrete Structures
CE 6114 Analysis and Design of Tall Buildings
CE 6115 Bridge Engineering
CE 6116 Finite Element Methods II
CE 6117 Structural Dynamics and Seismic Design of Structures
CE 6118 Structural Brick Work
2
CE 6119 Advanced Theory and Design of Steel Structures
CE 6201 Advanced Concrete Technology
CE 6203 Theory and Design of Structural Concrete
CE 6207 Wave Motion and Soil Structure Interaction

c. Environmental Division.

CE 6301 Theory of Water Treatment

CE 6302 Environmental Modeling and GIS Application
CE 6304 Theory of Sewage Treatment
CE 6309 Environmental Sanitation
CE 6319 Environmental Management
CE 6321 Environmental Impact Assessment
CE 6323 Surface water Quality Modeling
CE 6325 Environmental Fluid Dynamics
CE 6327 Aquatic Chemistry for Environmental Engineers
CE 6333 Air Pollution

d. Geotechnical Division

CE 6401 Soil Mechanics I

CE 6402 Soil Mechanics II
CE 6403 Foundation Analysis Methods
CE 6404 Earth Pressure and Retaining Structures
CE 6405 Earth Dams and Stability of Slopes
CE 6407 Soil Dynamics
CE 6408 Advanced Engineering geology
CE 6409 Reinforced Earth
CE 6410 Constitutive Modeling in Soil Mechanics
CE 6411 Earthquake Engineering

e. Transportation Division

CE 6502 Geometric Design of Highways

CE 6503 Highway Materials
CE 6504 Advanced Surveying
CE 6505 Structural Design of Pavements
CE 6507 Traffic Engineering
CE 6508 Railway Engineering
CE 6509 Water ways
CE 6510 Planning and Design of Airports
CE6511 Transportation Planning
CE 6512 Transportation Engineering Economics
CE 6513 Traffic Simulation
CE 6514 GIS and Remote Sensing in Transportation
CE 6516 Road Safety Engineering

3
7. Detail Contents of Master/Postgraduate Courses.

a. General Division.

CE 6011 Boundary Element Method

3.0 Credits

Introduction; One-dimensional problems: potential flow, beam bending; Two-

dimensional problems of potential flow; Two-dimensional problems of elasto-statics;
Axisymmetric analysis; Three-dimensional formulations; Parametric representations of
functions and geometry; Time-dependent analysis: elasto-dynamics, transient groundwater
flow; Non-linear analysis: problems of elasto-plasticity; Combination of Boundary
Element Method with other numerical methods.

CE 6012 Statistics in Civil Engineering

3.0 Credits

Descriptive statistics, probability concepts and laws, sample spaces; random variables;
binomial, uniform, normal, and Poisson; expected values; confidence intervals; median,
mean, and variance; testing simple hypotheses, goodness of fit; Central Limit Theorem;
statistical inference; Analysis of Variance; multiple regression and correlation concepts and
methods.

b. Structural Division.

CE 6101 Theory of Elasticity

3.0 Credits

Stress-strain relationship; Plane-stress and plane-strain; Stress functions; Two dimensional

problems in rectangular and polar coordinates; Torsion; Energy principles; Stress and strain
in three dimensions; General theorems; Three dimensional problems; Theories of failure;
Computer solutions of elasticity problem.

CE 6103 Theory of Plates

3.0 Credits

Rectangular plates with various edge conditions; Circular plates; Energy methods;
Approximate methods; Orthotropic plates; Numerical methods in the solution of plate
problems, Non-liner analyses of plates.

CE 6105 Plastic Design of Structures

3.0 Credits

Review of fundamental concepts. Plastic hinges, collapse of beams and frames; Effects of
4
axial load and shear forces; investigation of plastic collapse mechanisms and calculation of
collapse loads; Upper and lower bounds; Plastic analyses and design of beams, frames
and grillages; Plastic collapse of reinforced concrete and masonry structures; Elastic-plastic
analysis; Repeated loading; Shakedown theorems; Minimum weight design; numerical
analysis; Design of multistory frames.

CE 6106 Elastic Stability of Structures

3.0 Credits

Stability of struts and beam-columns; Initial imperfections; Inelastic bucking; Stability

functions; Stiffness matrix; Fixed and moments; Energy method; Elastic instability of plane
frames; Critical load; Buckling modes; Failure load analysis. Torsional buckling under
various conditions of end loads; Buckling by combined torsion and flexure. Lateral buckling
of beams; local buckling phenomenon; Buckling of thin plates and membrane shells;
Buckling of built-up sections.

CE 6108 Analysis and Design of Shells

3.0 Credits

Review of membrane theory of shells, Bending theory of cylindrical shells and shells of
revolution; Synclastic and anticlastic shells; Design of shell roof of various shapes. Finite
difference and finite element methods, Model analysis.

CE 6109 Finite Element Methods I

3.0 Credits

Introduction to finite element concepts, basic techniques, shape functions. Finite element
formulation of various elastic problems-plane stress, plane strain, axisymmetric and three
dimensional cases. Isoparametric elements, the elastic membrane, thick shell and plate
elements, body of revolution with pressure and sinusoidal loading, Local loads from shape
function routines. Bending of plates, axisymmetric shells, shells-the semiloof beam and
shell. Developing and implementing elements. Convergence the patch test. Solution
techniques. front and band solutions, element assembly and equation solving, round off
errors. Variational principles in finite element analysis.

CE 6111 Advanced Design of Concrete Structures

3.0 Credits

Review of principles; beams, slabs and columns, Design of columns; long columns,
two way slab systems, grids, waffle slabs, ribbed slab, deep beams, curved beams shear
walls, building frames, Design for torsion. Bulk storage structures, creep and temperature
5
effects. Details of reinforced concrete members, Advanced problems in foundations of
structures, Codes and specifications and their influence in design. An individual or group
project to design a complete structural system. Prestressed concrete structures.

CE 6114 Analysis and Design of Tall Buildings

3.0 Credits

Structural forms of tall buildings-floor system, vertical load resisting systems, lateral load
resisting systems. Choice of systems optimum design. Coupled shear walls-continuous
medium, wide-column analogy, and finite element solutions. Interaction of walls and
frames-approximate methods, analysis. Tubular structures-approximate methods, computer
analysis. Masonry high- rise buildings. The future of high-rise building. Numerical
Modeling and substructure method.

CE 6115 Bridge Engineering

3.0 Credits

Planning concepts, various types of bridges and their suitability for different span ranges.
Bridge loadings, Orthotropic plate decks, Grillage, space frame, finite element and finite
strip methods of bridge deck analysis. Long span bridges, box girder bridges, cable stayed
bridges, suspension bridges. Substructures; Design and construction.

CE 6116 Finite Element Methods II

3.0 Credits

General sources of nonlinearity in structures. Solution of nonlinear equations, incremental,

Iterative. Newton-Raphson and Modified Newton Raphson solution procedures. Geometric
Nonlinearity-Large displacement and structural instability, Lagrangian approach-both total
and updated, Eulerian approach, Material Nonlinearity- Material modeling. Yield criteria,
plasticity, creep, elasto-plasticity, visco-plasticity, elasto visco-plasticity, modeling of
reinforced concrete. Combined geometric and material nonlinearity. Modeling of dynamic
problems and solution procedure. Finite element analysis of non-structural problems fluid
flow, heat conduction, electro-magnetic field analysis etc.

CE 6117 Structural Dynamics and Seismic Design of Structures

3.0 Credits

Fundamentals of structural dynamics. SDOF, Free vibration response, response to harmonic,

periodic, impulsive and general dynamic loading. MDOF, undamped free vibrations.
Analysis of dynamic response. Beam: vibrations, random vibrations. Probability theory.
Deterministic and nondeterministic analysis of earthquake response. Earthquake resistant
design of buildings, bridges and dams.
6
CE 6118 Structural Brickwork
3.0 Credits

Properties of bricks and mortar: Strength compression element; Analysis and

brickwork; Strength of brick masonry compression element; Analysis and design of
unreinforced brickwork structures; Reinforced and prestressed brickwork structures;
Composite action of brick masonry walls.

CE 6119 Advanced Theory and Design of Steel Structure

3.0 Credits

Tension members - Design criteria; Compression members - Buckling of Column;

Residual Stress; Column Strength curves; AISC design formulas for working stress
design; Buckling of plates; Design of column as affected by local buckling. Design of
laterally supported beam; Shear on beams; Biaxial bending; Stresses due to torsions;
Analogy between torsion and plane bending; Design for combined procedures for laterally
unsupported beams. Beam column; AISC working stress design criteria for combined
bending and axial load; Connections.

CE 6201 Advanced Concrete Technology

3.0 Credits

Properties of plain concrete, physico-chemical aspects of behaviour; Constituent materials;

Cements, aggregates and admixtures; Influence of material properties on stress
distribution in structural members. Durability, permeability and porosity; physical and
chemical deterioration. Mix design, manufacture, transportation and placing. Form works.
Field control and acceptance. Testing destructive and nondestructive. Concrete for special
purposes.

CE 6203 Theory and Design of Structural Concrete

3.0 Credits

Introduction to the limit state design concept. Ultimate limit state design of sections in
bending, shear, torsion and combination of axial load and bending. Comparison of design
recommendations of different codes (viz. American, British, Canadian etc). Evaluation of
the impact of traditional concepts describing structural concrete behaviour on its analysis
and design. Introduction to compressive field theory, strut-and-tie model and compressive-
force path concept. Design in compliance with these concepts. Prospects and problems of
applying finite element method in the analysis and design of structural concrete.

7
CE 6207 Wave Motion and Soil Structure Interaction
3.0 Credits

Waves in strings; Longitudinal and flexural waves in thin rods; Stress waves developed
during pile driving; Shear wave propagation in buildings; Waves in membranes, thin plates
and shells; Waves in infinite and semi-infinite media and their classification; Scattering and
diffraction; Basic concept of soil-structure interaction; Basic equation of motion of soil-
structure interaction; Modeling of structure; Modeling of soil.

c. Environmental Division.

CE 6301 Theory of Water Treatment

3.0 Credits

Water and its impurities. Criteria of water quality; Physical, chemical and biological
treatment processes. Desalinization and demineralization processes. Control of aquatic
growths. Control of taste and odour.

CE 6302 Environmental Modeling and GIS Application

3.0 Credits

Introduction to environmental modeling; introductory concepts of GIS; Need for integrating

GIS with environmental modeling; application of GIS to environmental problem solving;
Application of GIS to cartographic modeling, broad-category environmental modeling,
atmospheric modeling, hydrological modeling, land surface and subsurface modeling, bio-
ecological systems modeling, integrated modeling; GIS and risk analysis; spatial analysis in
GIS for hazard assessment; role of modeling in policy formulation; Spatial information
analyses: sources of and issues related to spatial database; sample databases; Statistical
analyses of spatial data related to environmental and ecological systems; Geo-statistics.

CE 6304 Theory of Sewage Treatment

3.0 Credits

Composition, properties and analysis of sewage. Biology and bio-chemistry of sewage

treatment. Principles of physical, chemical and biological treatment processes. Tertiary
treatment of effluents. Sludge digestion. Sludge dewatering and disposal.

CE 6309 Environmental Sanitation

3.0 Credits

Application of engineering principles to the control of communicable diseases; Vector

control; Insecticides and bactericides; Collection and disposal of municipal refuse;

8
Housing; Milk and food sanitation; Industrial and personal hygiene; Air pollution;
Plumbing; Ventilation, air-conditioning; Hospital sanitation; Camp sanitation.

CE 6319 Environmental Management

3.0 Credits

Environment and sustainable development; Global and regional approach to

environmental management; Environmental implications of sectoral development:
Infrastructure, water resources, industry, agriculture, transport and communication,
energy, health and population, mineral resources, tourism, Land use and urbanization;
Environmental management at project level; Environmental resource management and
conservation strategies; Environmental policy and legislation; Environmental Quality
Standards (EQS); Economics of Environmental Management.

CE 6321 Environmental Impact Assessment (EIA)

3.0 Credits

Historical development; Definition, aims and objectives of Environmental Impact

Assessment (EIA); Environmental issues related to development projects; Project
screening, Initial Environmental Examination (IEE); Impact identification, prediction
analysis and evaluation; EIA methodologies: Adhoc, Checklists, Matrices, Network,
Simulation Modeling Workshops (SMW), Environmental Evaluation System (EES),
Overlays, Geographical Information System Guidelines; Environmental Impact
Statement (EIS); Impact mitigation plan; Environmental monitoring and post-
development audits; Organization of EIA: Scope, Work plan, resource requirements
and costs of EIA, TOR for EIA; EIA in developing countries; Case studies.

CE 6323 Surface Water Quality Modeling

3.0 Credits

Principal components of dissolved oxygen (DO) analysis, sources and sinks of DO kinetics,
DO analysis for water bodies, engineering control of DO; Basic mechanisms of
eutrophication, significance of N/P ratio, sources and sinks of N and P, phytoplankton and
nutrient interactions, phytoplankton-DO relationships, simplified river-stream utrophication
analysis for phytoplankton and rooted aquatic plants; Objectives of modeling,
applications; Mass loading range estimations: point source, tributary and intermittent
sources; Low flow estimates, travel time and velocity estimates; Steady state stream
equations; Estuarine hydrology; Distribution of water quality in rivers and estuaries,
dispersion coefficients, hydraulic transport processes, mathematical formulations, water

9
quality parameters, solution techniques, multi-dimensional models; Physical and
hydrologic characteristics of lakes, lakeside response to inputs, finite segment steady
state lake models, model calibration and verification, sensitivity analysis, parameter
estimation; Case studies.

CE 6325 Environmental Fluid Dynamics

3.0 Credits

Governing laws of motion for a viscous fluid: Review of laminar and turbulent
flows; Fickian diffusion; Turbulent diffusion, Mass transport equation; Shear flow
dispersion; Mixing in rivers and estuaries; Jets and buoyant jets; Reservoir dynamics;
Pollutant movement in porous media; Computation of environmental flows.

CE 6327 Aquatic Chemistry for Environmental Engineers

3.0 Credits

Review of some fundamentals of Chemistry; Approaches to equilibrium problem

solving: numerical solution, graphical solution, the 'tableau method'; Natural weak
acids and bases, alkalinity and pH in natural waters, buffer capacity; Dissolved
carbonate equilibria (closed system), dissolution of CO2 (open system); Solubility of
solids, coexistence of phases in equilibrium; Metal ions and ligands in natural waters,
aqueous complexes, ion association among major aquatic constituents, inorganic and
organic complexation of trace elements; Redox equilibria and electron activity, pe-pH
diagrams, redox conditions in natural waters; Aquatic particles and coordinative
properties of surfaces, adsorption of metals and ligands on aquatic particles, surface
complexation models; Fate of organic compounds in natural environment:
volatilization, sorption/partitioning, transformation reactions, structure-activity and
property-activity relationships.

CE 6333 Air Pollution

3.0 Credits

Sources and classification of air pollutants; Effects of air pollution; Air pollution regulations,
air quality standards, emission standards, pollution indices; Sources of pollutants in
combustion process; Air pollution and meteorology: properties of atmosphere, atmospheric
lapse rates and atmospheric stability, atmospheric diffusion theories, Gaussian plume models;
Air pollution statistics: probability distribution of air pollutant concentrations and estimation
of parameters in distribution, order statistics of air quality data, exceedances of critical levels;
Air quality management and control measures: atmospheric removal processes, engineered
10
systems for air pollution control; Global atmospheric change: global warming, stratospheric
ozone layer depletion; Indoor air quality; Air pollution measurements.

d. Geotechnical Division.

CE 6401 Soil Mechanics I

3.0 Credits

Identifying characteristics of soils, clay minerals, clay-water relation, fabric, Compression.

One and three dimensional consolidation, swelling, collapse and rheological properties.
Soil shear strength, concept of cohesion and internal friction. Failure theories, bearing
capacity equations and factors. Subsoil exploration programme, interpretation of
topographic, geological and agricultural soil maps. Laboratory testing of soils and their
interpretation for engineering purposes.

CE 6402 Soil Mechanics II

3.0 Credits

Soil porosity and moisture effects relative to effective stress principles, capillarity,
permeability and frost action. Hydraulic fracturing. Principles governing flow of water
through soils. Soil seepage analysis for isotropic and anisotropic conditions. Numerical
techniques for vertical and radial drainage. Description, design procedure and usage of
current site improvement techniques, preloading, earth reinforcement, dynamic
consolidation, vibro-compaction, blasting densification, lime treatment, drains and
geotechnical fabrics.

CE 6403 Foundation Analysis Methods

3.0 Credits

Elastic foundations, loads on infinite slabs, subgrade coefficient, settlement on non-

homogeneous half space, linearly-elastic pile and soil, laterally loaded pile, soil
foundation interaction for footing and mat designs. Analysis of simple pile and pile
group foundations. Exact and numerical solutions to above problems.

CE 6404 Earth pressure and Retaining Structures

3.0 Credits

Fundamentals of lateral earth pressure and classical methods of analysis. Analysis of

braced excavations, retaining walls and design of sheet piling system. Principles of
cofferdam design. Bearing capacity theories related to shallow and deep foundations.

11
CE 6405 Earth dams and Stability of Slopes
3.0 Credits

Seepage in composite sections. Methods of stability analysis, stability of slopes.

Compaction, Measurement of performance, construction and control of embankment.

CE 6407 Soil Dynamics

3.0 Credits

Sources and types of dynamic loading. Vibration of elementary systems, Wave propagation
in soils. Dynamic solid properties and methods of their determination, liquefaction, shear
modulus and damping effects. Vibrations of foundations on elastic media, machine
foundations, earthquake response, blast effects including nuclear weapon effects.

CE 6408 Advanced Engineering Geology

3.0 Credits

Advanced physical geology concerning transported and residual soils. Erosion and
deposition. Geomorphology. Study of the formation of delta. Engineering geology of soft
clays. Engineering properties of rocks. Geologic structures. Historical geology. Geology
of Bengal Basin. Earthquake zones of Bangladesh. Geological considerations for
engineering designs.

CE 6409 Reinforced Earth

3.0 Credits

Materials used in reinforced earth; constitutive laws; Design parameters and testing
techniques; Conceptual performance of reinforced soil; Analysis, design and construction of
reinforced earth retaining structures; Reinforced slopes; Design and construction of
reinforced paved and unpaved road; Analysis, design and construction of granular in-
situ stabilized columns; Soil nailing, root or micro-piles. Random (non-oriented) fibre
reinforced soil.

CE 6410 Constitutive Modeling in Soil Mechanics

3.0 Credits

Elasto-plastic modeling of soils; Model development process; Models for different types of
soils; Monotonic, cyclic and repetitive loading models; Modern approach of constitutive
modeling in soil mechanics; Thermodynamic approach of modeling; Application of soil
models with small and large strain theories; Application of soil models in Finite Element
Method, Distinct Element Method and Finite Difference Method.

12
CE 6411 Earthquake Engineering
3.0 Credits

Historical background; Plate tectonics; Various types of earthquakes and faulting;

Wave types and their characteristics; Characteristics of seismometers and micro-tremor
instruments; Characteristics of magnitude and intensity scales; Earthquake time
histories; Fourier and response spectra; Historical seismicity and earthquake catalogues:
data acquisition, sources, magnitude rescaling, application to hazard analysis; Site
characterization: amplification and responses; Experimental simulation and shaking
tables; Introduction to lifeline engineering: electricity, water, natural gas,
telecommunication and transportation systems; Post earthquake damage survey;
Mitigation strategies; Case studies of major earthquakes.

e. Transportation Division.

CE 6502 Geometric Design of Highways

3.0 Credits

Highway classification; Design controls and criteria; Traffic, vehicle characteristics,

speed capacity; Elements of design; Sight distance, horizontal and vertical alignment;
Cross-section elements; Road intersections, grade separation and interchanges; Highway
drainage.

CE 6503 Highway Materials

3.0 Credits

Origin, production, specifications properties and uses of bituminous materials; binder

mixtures; design and analysis of bituminous paving mixes; field operations, surface
treatments, stabilization methods; aggregates, base, subbase and subgrade; cement
concrete in pavement constructions.

CE 6504 Advanced Surveying

3.0 Credits

Triangulation; Classification and schemes, instruments, linear and angular

measurements, field works errors and corrections, computations; Geometric leveling;
Field astronomy; Motions of earth, and other stars, time, coordinate systems, errors and
corrections; Hydrographic surveying; determination of depth under water, measurement
of discharge and stream current; Terrestrial and aerial photogrammetry; Instruments,
field works, plotting of maps, analysis and interpretation of photographs, stereo-
photogrammetry, remote sensing and its application in civil engineering.
13
CE 6505 Structural Design of Pavements
3.0 Credits

Pavement types, wheel loads, stresses in flexible pavements, stresses in rigid

pavements, pavement performance, evaluation of subgrade and base support, design
theories and practices, construction methods and maintenance, pavement rehabilitation.

CE 6507 Traffic Engineering

3.0 Credits

Characteristics of vehicles and driver, traffic stream characteristics, traffic control and
operation, traffic surveys, accidents and road safety, parking, roadway lighting, traffic
management and administration.

CE 6508 Railway Engineering

3.0 Credits

General requirements, permanent way, alignments, gradient and curves, points and
crossings, signaling and interlocking, tunneling, construction and maintenance.

CE 6509 Waterways
3.0 Credits

Historical development of navigation, navigational channels, survey of waterways,

classification of waterways, traffic, vessels, ports and harbours, navigational aids,
maintenance of waterways.

CE 6510 Planning and Design of Airports

3.0 Credits

Growth and demand of air transport, airport site selection and configuration, geometric
design of runways and taxiways, terminal areas, capacity analysis, lighting and marking, air
traffic control systems, structural design, construction and maintenance of airport pavements,
airport drainage.

CE 6511 Transportation Planning

3.0 Credits

Techniques and processes used in solving transportation problems, relationship

between trip generation and land use, collection and characteristics of base year data,
formulation of mathematical models to simulate existing travel patterns, forecasting
procedures and evaluation of transportation systems.

14
CE 6512 Transportation Engineering Economics
3.0 Credits

Introduction to basic economic theories; principles and methodologies appropriate to

transportation engineering; identification and measurement of transportation costs and
benefits; Road user charges and principles of road pricing; Evaluation of transportation
proposals in terms of their economic, social and environmental consequences; Techniques of
cost benefit analysis; Selected case studies - application of economic principles to one
or more current issues in transportation policy and planning.

CE 6513 Traffic Simulation

3.0 Credits

Introduction to simulation techniques; Review of Monte Carlo simulation, macroscopic

and microscopic simulation, deterministic and stochastic simulation; Simulation in
traffic engineering, review of traffic simulation models, lane-based and non-lane-based
mixed traffic simulation; Simulation system components, introduction to statistical
distributions, sampling from distributions, random number generation techniques, vehicle
representation and processing techniques, simulation warm up and update procedures;
Development of traffic simulation model, logical aspects of modeling traffic flow
components, elements of systems analysis and synthesis; Model verification, refinements
and parameter estimation, calibration and validation; Application of simulation models.

CE 6514 GIS and Remote Sensing in Transportation

3.0 Credits

Concepts of Geographic Information Systems (GIS): definition, data structure, data

processing and management, spatial analysis; GIS software; Basic principles of remote
sensing (RS) and global positioning systems (GPS): definition, data acquisition,
spectral characteristics of land cover, multi-spectral analysis, image interpretation,
geometric corrections, classification techniques; Integration of RS and GPS with GIS; GIS
applications in the field of transportation planning and traffic engineering: digitized mapping
of land use and transport network, transport infrastructure development and management,
analysis and prediction of impacts, strategy planning, monitoring and evaluation of
transport systems and environment, route selection, traffic management and accident
analysis, public transport information systems; Integration of GIS packages with
transport modeling software.

15
CE 6516 Road Safety Engineering
3.0 Credits

Introduction to road safety engineering; safety management systems; factors in road traffic
accidents; analysis of accident situation in Bangladesh, impact of mixed mode traffic,
international comparison; accident classifications, locations, types and clusters; accident
data- needs, collection, analysis, presentation, limitations; diagnosis of road accident
problems; hazardous road locations; development of road safety countermeasures; road
safety engineering strategies; low-cost road safety and traffic engineering measures; traffic
calming; accident costing and evaluation; studies of the effects of accident remedial
measures; vulnerable and non-motorized road users; new approaches to road safety-
introduction to safety software, road safety audit, safety awareness and community based
road safety; road safety program appraisal, monitoring and evaluation.

16