Piping and Instrumentation

Drawings

Version: V7.3.1
March 2011
Copyright (c) 2001-2011 by Aspen Technology, Inc. All rights reserved.
Aspen Capital Cost Estimator, Aspen Process Economic Analyzer, and the aspen leaf logo are trademarks or registered trademarks of Aspen Technology, Inc.,
Burlington, MA.
All other brand and product names are trademarks or registered trademarks of their respective companies.
This manual is intended as a guide to using AspenTech's software. This documentation contains AspenTech proprietary and confidential information and may not
be disclosed, used, or copied without the prior consent of AspenTech or as set forth in the applicable license agreement. Users are solely responsible for the
proper use of the software and the application of the results obtained.
Although AspenTech has tested the software and reviewed the documentation, the sole warranty for the software may be found in the applicable license
agreement between AspenTech and the user. ASPENTECH MAKES NO WARRANTY OR REPRESENTATION, EITHER EXPRESSED OR IMPLIED,
WITH RESPECT TO THIS DOCUMENTATION, ITS QUALITY, PERFORMANCE, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR
PURPOSE.

Corporate
Aspen Technology, Inc.
200 Wheeler Road
Burlington, MA 01803-5501
Phone: 781-221-6400
Toll Free: 888-996-7100
URL: http://www.aspentech.com

Contents

Introduction ............................... V
Drawings ....................................1
Appendix A: Symbols .............185
Appendix B: Abbreviations .....187
Index ......................................191

Introduction

Note: The drawings represented in the following document are

superseded by the drawings contained in the
AspenTech\Economic Evaluation V7.3.1\Program\Docs\PIDs
folder. Please refer to this location for the latest drawing
revisions. This document should be used solely as a drawing
reference for internal volumetric models not depicted
elsewhere.

example, a towers pipe diameter and length is determined by

the diameter, height, pressure, temperature, number of trays,
and estimated flow rates. Each run of pipe is consistent with
the tower materials, and of a specific length, diameter,
schedule, valve, and fitting count, and so on, to fulfill the
functionality assigned to that line of pipe. Thus, the Volumetric
Models create materials to be installed.
P&IDs come in either a standard (STD) or a more fully
instrumented (FULL) configuration that may be specified at the
Project and Area levels. Both the standard and full versions are
shown in this book. The 600 series drawings represent the full
versions.

This book contains piping and instrumentation drawings

(P&IDs) representing Aspen Icarus Volumetric Models.
Volumetric Models develop material quantities and are based
on recognized design methods and construction standards.
Volumetric Models are the key components behind Aspen
Icarus unique method of designing and estimating.
Volumetric Models determine the field materials (type,
quantity, weights, and sizes) required to install an equipment
item. Volumetric Models generate the material takeoff for
equipment handling and setting, piping, civil, structural steel,
instrumentation, electrical, insulation and paint materials. For

Icarus Piping and Instrumentation Drawings

How Project Instrumentation is Developed

Aspen Icarus systems develop the cost of project
instrumentation based upon the direct costs of materials and
manpower for the following major items:
Primary element hook-up
Signal transmission
Field/panel hook-up
Final element hook-up
Control Center
Operator Center
Primary Element Hook-Up

The primary element is a field-mounted component with all the

necessary accessories for process connection and signal
transmission to a centrally located field junction box. For
pneumatic systems, it includes all the piping, tubing, fittings,
valves, and filter-regulators necessary for connecting the
impulse piping and air supply to the transmitter, and the
process signal tubing to the field junction box. Aspen Icarus
systems group this process signal tubing into one or more field
junction boxes. For electronic systems, the system assumes a
two-wire control loop where power for the transmitter is taken
from a power supply in the Control Center. A 4-20 ma DC
signal is assumed. Aspen Icarus systems calculate material and
manpower costs for fabricating and installing all pipe, valves,
and fittings for the impulse piping connection to the
transmitter, and all wiring and electrical fittings to the field
junction box. Single or multiple twisted pairs of insulated

vi

stranded copper wire are used for the control system. You may
specify the type of wiring in the Area date. If IM is selected,
the complete control wiring system is costed using control wire
and multi-conductor cable. The twisted pair consists of
stranded copper wire with a mylar tape separator and an
extruded PVC jacket.
Signal Transmission

At each junction box, the system differentiates between

Control and Indicating function for grouping into multi-tube
bundles to be sent to the Control Building for connection to the
back of the control panel. For example, two tubes are required
for the transmission signal of a control loop from a junction
box: one tube for the process transmitter signal to the control
and another tube for the control signal from the controller to
the final element, as opposed to an indicating loop that is
deadended at the indicating instrument in the control panel
and requires only one tube for signal transmission. Pneumatic
transmission tubing is 0.25 INCHES [8 MM] OD, singly or
bundled. If the transmission distance between Control Center
and the field junction box exceeds 300 FEET [90 M], the
system provides a WARNing message. In such an instance,
you should consider using an electronic system rather than a
pneumatic control system to improve dynamic response. The
type of control system, electronic or pneumatic, is specified in
the Area data.
Like pneumatic systems, electronic systems differentiate
between the different types of instrumentation loops. For
example, in control loops, two pairs of signal transmission wire
are required: one pair for the transmitter signal and the other
pair for the control signal. Both pairs tie-in in the junction box

Icarus Piping and Instrumentation Drawings

back of the control panel to the field junction box located in the
Area. At the field junction box, the transmission wires are
collected and sent to the control room in multi-conductor cable
in conduit or on cable trays. Aspen Icarus systems allow the
user to select three different types of cables for transmission:
multi-conductor wire; cable with interlocked armor; and cable
pulled in rigid conduit.
Field/Panel Hook-Up

Aspen Icarus systems calculate the material and man-power

cost for connecting each tube from the multi-tube bundle to the
bulkhead plate in back of the control panel in the main control
building. For an electronic control system, the system
calculates the cost of material and manpower to connect all
signal wiring to and from the field junction box to the field
tie-in terminal blocks on the back of the panel.
Final Element Hook-Up

For pneumatic systems, system calculates the material and

manpower cost to fabricate and assemble the piping, valves,
and fittings required for the air supply and control signal from
the junction box.
Aspen Icarus systems make the same calculations for electronic
systems, with the exception that the control signal is wired
from the junction box to an electopneumatic transducer
mounted on the valve positioner valve.

Icarus Piping and Instrumentation Drawings

vii

Analog Control Center

Thermocouple Wiring

The cost of the control panel is developed from:

On temperature control loops where thermocouples are used as

sensing devices, the transmitter is assumed to be mounted on
the thermocouple head.

The list of instruments, either electronic, pneumatic, or

a combination of these control systems.
The type of display: conventional, semi-graphic, or full
graphic type.

Aspen Icarus systems assume straight type panels and

conventional miniature instruments with an instrument density
of 4.75 per linear foot [15.6 per meter] for conventional
displays, 3.75 per linear foot [12.3 per meter] for semi-graphic
displays, and 2.5 per linear foot [8.2 per meter] for full graphic
displays. The total number and cost of panel-mounted
instruments is reported apart from the size and cost of the
control panel. The cost of the control panel includes the
hardware cost of all switches, relays, alarms, power supplies,
etc., required for all designated Areas in the facility, It also
includes the cost of sheet metal fabrication, piping and/or
wiring, and the cost of shipping and installation at the job site.
Local Equipment Panels

Aspen Icarus systems calculate the cost of material and

manpower for the fabrication and installation of each local
equipment panel and any wiring or pneumatic piping
connections for alarms, switches, indicators, etc., to the main
control panel.

viii

Icarus Piping and Instrumentation Drawings

Icarus Piping and Instrumentation Drawings

ix

Drawings

The piping and instrumentation drawings that follow are arranged in numeric order. For easy reference, the 600 series drawings, representing fully
instrumented models, immediately follow the corresponding standard models. For example, Drawing 603 immediately follows Drawing 3.

Icarus Piping and Instrumentation Drawings

3 Kettle Reboiler

Icarus Piping and Instrumentation Drawings

603 Kettle Reboiler

Icarus Piping and Instrumentation Drawings

Horizontal Pressure Vessel Continuous

Icarus Piping and Instrumentation Drawings

604 Horizontal Pressure Vessel Continuous

Icarus Piping and Instrumentation Drawings

Horizontal Jacketed Pressure Vessel - Continuous

Icarus Piping and Instrumentation Drawings

604 Horizontal Jacketed

cketed Pressure Vessel Continuous

Icarus Piping and Instrumentation Drawings

Horizontal Pressure Vessel Batch

Icarus Piping and Instrumentation Drawings

Horizontal Jacketed Pressure Vessel Batch

Icarus Piping and Instrumentation Drawings

10

Vertical Pressure Vessel Batch

Icarus Piping and Instrumentation Drawings

Vertical Jacketed Pressure

re Vessel Batch

Icarus Piping and Instrumentation Drawings

11

12

Vertical Pressure Vessel Continuous

Icarus Piping and Instrumentation Drawings

606 Vertical Pressure Vessel Continuous

Icarus Piping and Instrumentation Drawings

13

14

Vertical Jacketed Pressure Vessel Continuous

Icarus Piping and Instrumentation Drawings

606 Vertical Jacketed

acketed Pressure Vessel Continuous

Icarus Piping and Instrumentation Drawings

15

16

Utility Boiler Unit

Icarus Piping and Instrumentation Drawings

7A Utility Boiler Unit

Icarus Piping and Instrumentation Drawings

17

7B Utility Boiler Unit

18

Icarus Piping and Instrumentation Drawings

7C Utility Boiler Unit

Icarus Piping and Instrumentation Drawings

19

20

Compressor

Icarus Piping and Instrumentation Drawings

8A Compressor

Icarus Piping and Instrumentation Drawings

21

22

Air Cooled Heat Exchanger

Icarus Piping and Instrumentation Drawings

609 Air Cooled Heat Exchanger

Icarus Piping and Instrumentation Drawings

23

10 Horizontal Pressure Vessel Receiver

24

Icarus Piping and Instrumentation Drawings

10 Horizontal Jacketed Pressure Vessel Receiver

Icarus Piping and Instrumentation Drawings

25

10 Vertical Pressure Vessel Receiver

26

Icarus Piping and Instrumentation Drawings

10 Vertical Jacketed Pressure Vessel Receiver

Icarus Piping and Instrumentation Drawings

27

11 Shell & Tube Heat Exchanger

28

Icarus Piping and Instrumentation Drawings

611 Shell & Tube Heat Exchanger

Icarus Piping and Instrumentation Drawings

29

12 Process Heater Furnace

30

Icarus Piping and Instrumentation Drawings

612 Process Heater Furnace

Icarus Piping and Instrumentation Drawings

31

13 Waste Heat Boiler

32

Icarus Piping and Instrumentation Drawings

14 Water Chiller

Icarus Piping and Instrumentation Drawings

33

614 Water Chiller

34

Icarus Piping and Instrumentation Drawings

15 Cooling Tower

Icarus Piping and Instrumentation Drawings

35

615 Cooling Tower

36

Icarus Piping and Instrumentation Drawings

16 Motor Driven Centrifugal Pump

Icarus Piping and Instrumentation Drawings

37

616 Motor Driven Centrifugal Pump

38

Icarus Piping and Instrumentation Drawings

616 Motor Driven Spare Centrifugal Pump

Icarus Piping and Instrumentation Drawings

39

17 Turbine (>500 HP, 375 KW)

40

Icarus Piping and Instrumentation Drawings

18 Storage Vessel

Icarus Piping and Instrumentation Drawings

41

19 Horizontal Pressure Vessel Storage

42

Icarus Piping and Instrumentation Drawings

619 Horizontal Pressure Vessel Storage

Icarus Piping and Instrumentation Drawings

43

19 Horizontal Jacketed Pressure Vessel Storage

44

Icarus Piping and Instrumentation Drawings

619 Horizontal Jacketed Pressure Vessel Storage

Icarus Piping and Instrumentation Drawings

45

19 Vertical Pressure Vessel Storage

46

Icarus Piping and Instrumentation Drawings

619 Vertical Pressure Vessel Storage

Icarus Piping and Instrumentation Drawings

47

19 Vertical Jacketed Pressure Vessel Storage

48

Icarus Piping and Instrumentation Drawings

619 Vertical Jacketed Pressure Vessel Storage

Icarus Piping and Instrumentation Drawings

49

20 Pumps Gear & Positive Displacement

50

Icarus Piping and Instrumentation Drawings

21 Reciprocating Compressor

Icarus Piping and Instrumentation Drawings

51

621 Reciprocating Compressor

52

Icarus Piping and Instrumentation Drawings

22 Horizontal Pressure Vessel Knockout

Icarus Piping and Instrumentation Drawings

53

622 Horizontal Pressure Vessel Knockout

54

Icarus Piping and Instrumentation Drawings

22 Horizontal Jacketed Pressure Vessel Knockout

Icarus Piping and Instrumentation Drawings

55

622 Horizontal Jacketed Pressure Vessel Knockout

56

Icarus Piping and Instrumentation Drawings

22 Vertical Pressure Knockout

Icarus Piping and Instrumentation Drawings

57

622 Vertical Pressure Vessel Knockout

58

Icarus Piping and Instrumentation Drawings

22 Vertical Jacketed Pressure Vessel Knockout

Icarus Piping and Instrumentation Drawings

59

622 Vertical Jacketed Pressure Vessel Knockout

60

Icarus Piping and Instrumentation Drawings

23 Enclosed Jacket Reactor Continuous

Icarus Piping and Instrumentation Drawings

61

623 Enclosed Jacket Reactor Continuous

62

Icarus Piping and Instrumentation Drawings

23 Open Top Jacket Reactor Continuous

Icarus Piping and Instrumentation Drawings

63

623 Open Top Jacket Reactor Continuous

64

Icarus Piping and Instrumentation Drawings

24 Refrigeration Compressor

Icarus Piping and Instrumentation Drawings

65

26 Vessel Heater

66

Icarus Piping and Instrumentation Drawings

27 Motor Driven In-Line Pump

Icarus Piping and Instrumentation Drawings

67

627 Motor Driven In-Line Pump

68

Icarus Piping and Instrumentation Drawings

28 Particulate Scrubber

Icarus Piping and Instrumentation Drawings

69

29 Screw Conveyor

70

Icarus Piping and Instrumentation Drawings

30 Plate and Frame Filter

Icarus Piping and Instrumentation Drawings

71

31 Water-Sealed Vacuum Pump

72

Icarus Piping and Instrumentation Drawings

32 Fans and Blowers

Icarus Piping and Instrumentation Drawings

73

33 Cloth Bay Baghouse Dust Collector

74

Icarus Piping and Instrumentation Drawings

34 Cyclone Dust Collector

Icarus Piping and Instrumentation Drawings

75

36 Live Bottom Bin

76

Icarus Piping and Instrumentation Drawings

37 Cone Bottom Vessel

Icarus Piping and Instrumentation Drawings

77

38 Centrifuge Precipitator

78

Icarus Piping and Instrumentation Drawings

39 Horizontal Plate Filter

Icarus Piping and Instrumentation Drawings

79

40 Automatic Batch Centrifuge

80

Icarus Piping and Instrumentation Drawings

41 Manually Operated Centrifuge

Icarus Piping and Instrumentation Drawings

81

45 Fabric Cartridge Filter

82

Icarus Piping and Instrumentation Drawings

46 Tubular Fabric Filter

Icarus Piping and Instrumentation Drawings

83

48 Smokeless Flare

84

Icarus Piping and Instrumentation Drawings

51 DDT Gas Adsorption Service

Icarus Piping and Instrumentation Drawings

85

51 Tower Gas Adsorption Service

86

Icarus Piping and Instrumentation Drawings

52 DDT Liquid Adsorption Service

Icarus Piping and Instrumentation Drawings

87

52 Tower Liquid Adsorption Service

88

Icarus Piping and Instrumentation Drawings

53 DDT Extraction Service

Icarus Piping and Instrumentation Drawings

89

53 Tower Extraction Service

90

Icarus Piping and Instrumentation Drawings

54 DDT Absorber Service

Icarus Piping and Instrumentation Drawings

91

54 Tower Absorber Service

92

Icarus Piping and Instrumentation Drawings

55 DDT Stripper with Therm. RB

Icarus Piping and Instrumentation Drawings

93

55 Tower Stripper with Therm. RB

94

Icarus Piping and Instrumentation Drawings

56 DDT Desorber Service

Icarus Piping and Instrumentation Drawings

95

56 Tower Desorber Service

96

Icarus Piping and Instrumentation Drawings

57 Horizontal Thermosiphon Reboiler

Icarus Piping and Instrumentation Drawings

97

57 Vertical Thermosiphon Reboiler

98

Icarus Piping and Instrumentation Drawings

59 DDT Distillation with Therm. RB

Icarus Piping and Instrumentation Drawings

99

659 DDT Distillation with Therm. RB

100

Icarus Piping and Instrumentation Drawings

59 Tower Distillation with Therm. RB

Icarus Piping and Instrumentation Drawings

101

659 Tower Distillation with Therm. RB

102

Icarus Piping and Instrumentation Drawings

60 Continuous Centrifuge

Icarus Piping and Instrumentation Drawings

103

61 Mill

104

Icarus Piping and Instrumentation Drawings

62 Liquid Cyclone Separator

Icarus Piping and Instrumentation Drawings

105

63 Flotation Cell

106

Icarus Piping and Instrumentation Drawings

64 Conditioning Cell

Icarus Piping and Instrumentation Drawings

107

65 Crusher

108

Icarus Piping and Instrumentation Drawings

66 Scale

Icarus Piping and Instrumentation Drawings

109

67 Turbine (<500 HP, 375 KW)

110

Icarus Piping and Instrumentation Drawings

68 Enclosed Reactor Vessel Continuous

Jacket: See Drawing 23 and 623

Icarus Piping and Instrumentation Drawings

111

668 Enclosed Reactor Vessel Continuous

Jacket: See Drawing 23 and 623

112

Icarus Piping and Instrumentation Drawings

68 Open Top Reactor Vessel Continuous

Icarus Piping and Instrumentation Drawings

113

668 Open Top Reactor Vessel Continuous

Jacket: See Drawing 23 and 623

114

Icarus Piping and Instrumentation Drawings

69 Non-Smokeless Flare

Icarus Piping and Instrumentation Drawings

115

70 DDT Distillation with Kettle RB

116

Icarus Piping and Instrumentation Drawings

670 DDT Distillation with Kettle RB

Icarus Piping and Instrumentation Drawings

117

70 Tower Distillation with Kettle RB

118

Icarus Piping and Instrumentation Drawings

670 Tower Distillation with Kettle RB

Icarus Piping and Instrumentation Drawings

119

71 DDT Stripper with Kettle RB

120

Icarus Piping and Instrumentation Drawings

71 Tower Stripper with Kettle RB

Icarus Piping and Instrumentation Drawings

121

72 Air Compressor

122

Icarus Piping and Instrumentation Drawings

73 Graphite Heat Exchanger

Icarus Piping and Instrumentation Drawings

123

74 Reactor Vessel Batch

124

Icarus Piping and Instrumentation Drawings

74AReactor Vessel Batch

Icarus Piping and Instrumentation Drawings

125

74BReactor Vessel Batch

126

Icarus Piping and Instrumentation Drawings

74C Reactor Vessel Batch

Icarus Piping and Instrumentation Drawings

127

74D

128

Reactor Vessel Batch

Icarus Piping and Instrumentation Drawings

75 Motor Water to Air Cooling

Icarus Piping and Instrumentation Drawings

129

76 Motor Driven Magnetic Drive Pipe

130

Icarus Piping and Instrumentation Drawings

676 Motor Driven Magnetic Drive Pump

Icarus Piping and Instrumentation Drawings

131

79 Storage Tank Cryogenic

132

Icarus Piping and Instrumentation Drawings

80 Rectangular Tile Chest

Icarus Piping and Instrumentation Drawings

133

81 Cylindrical Tile Chest

134

Icarus Piping and Instrumentation Drawings

82 Vibrating Pressure Screen

Icarus Piping and Instrumentation Drawings

135

83 Bow Screen Low Consistency Stock Screen

136

Icarus Piping and Instrumentation Drawings

84 Deflaker

Icarus Piping and Instrumentation Drawings

137

85 Refiner

138

Icarus Piping and Instrumentation Drawings

88 Static Mixer

Icarus Piping and Instrumentation Drawings

139

88S Static Mixer With 316PS Pipe Material

140

Icarus Piping and Instrumentation Drawings

92 Off Machine Pulper

Icarus Piping and Instrumentation Drawings

141

93 On Machine Pulper

142

Icarus Piping and Instrumentation Drawings

99 Rotary Blender

Icarus Piping and Instrumentation Drawings

143

100 Culinary Air Filter

144

Icarus Piping and Instrumentation Drawings

101 Culinary (Sterile) Steam Filter F-6

Icarus Piping and Instrumentation Drawings

145

102 Sanitary Pipe Filter

146

Icarus Piping and Instrumentation Drawings

103 Sanitary Pipe Strainer

Icarus Piping and Instrumentation Drawings

147

104 Sanitary Filter Press

148

Icarus Piping and Instrumentation Drawings

105 In-Line Metal Trap

Icarus Piping and Instrumentation Drawings

149

106 Fluming Reclaim Reel

150

Icarus Piping and Instrumentation Drawings

107 Shear Pump Homogenizer

Icarus Piping and Instrumentation Drawings

151

108 Homogenizer Piston Head

152

Icarus Piping and Instrumentation Drawings

109 High-Speed Mixer (Norman)

Icarus Piping and Instrumentation Drawings

153

110 Rotary Bowl/Mixer Blender

154

Icarus Piping and Instrumentation Drawings

111 Kettle Blender Without Steam Jacket

Icarus Piping and Instrumentation Drawings

155

111 Kettle Blender With Steam Jacket

156

Icarus Piping and Instrumentation Drawings

112 Horizontal Ribbon Blender

Icarus Piping and Instrumentation Drawings

157

112 Jacket Horizontal Ribbon Blender

158

Icarus Piping and Instrumentation Drawings

113 Reversing Anchor Agitator

Icarus Piping and Instrumentation Drawings

159

114 Double Motion Agitator

160

Icarus Piping and Instrumentation Drawings

115 Fluming Pump

Icarus Piping and Instrumentation Drawings

161

116 Air Diaphragm Sanitary Pump

162

Icarus Piping and Instrumentation Drawings

117 Sanitary Rotary Lobe Pump

Icarus Piping and Instrumentation Drawings

163

118 Sanitary Centrifugal Pump With Flow Control

164

Icarus Piping and Instrumentation Drawings

119 Sanitary Horizontal Tank

Icarus Piping and Instrumentation Drawings

165

119 Jacket Sanitary Horizontal Tank

166

Icarus Piping and Instrumentation Drawings

120 Sanitary Vertical Tank Atmospheric Surge

Icarus Piping and Instrumentation Drawings

167

120 Jacket Sanitary Vertical Tank Atmospheric Surge

168

Icarus Piping and Instrumentation Drawings

121 Sanitary Vertical Tank Atmospheric Mixing

Icarus Piping and Instrumentation Drawings

169

121 Jacket Sanitary Vertical Tank Atmospheric Mixing

170

Icarus Piping and Instrumentation Drawings

122 Super Sack Unloader With Screw Conveyor Discharge

Icarus Piping and Instrumentation Drawings

171

123 Super Sack Unloader With Pneumatic Conveyance Discharge

172

Icarus Piping and Instrumentation Drawings

124 Container Dumper Column

Icarus Piping and Instrumentation Drawings

173

125 Container Dumper Hydraulic Drum

174

Icarus Piping and Instrumentation Drawings

126 Container Dumper Hydraulic Bin

Icarus Piping and Instrumentation Drawings

175

127 Double Pipe Corrugated Exchanger

176

Icarus Piping and Instrumentation Drawings

128 Direct Steam Injection (DSI) Exchanger

Icarus Piping and Instrumentation Drawings

177

129 Plate & Frame Multizone Heat Exchanger

178

Icarus Piping and Instrumentation Drawings

130 Hotwater Set With Shell & Tube Heat Exchanger

Icarus Piping and Instrumentation Drawings

179

131 Fluming Dewatering Shaker

180

Icarus Piping and Instrumentation Drawings

135 Sanitary Weight Belt Feeder

Icarus Piping and Instrumentation Drawings

181

136 Sanitary Floor Scale

182

Icarus Piping and Instrumentation Drawings

137 Sanitary Screw Feeder

Icarus Piping and Instrumentation Drawings

183

138 Rotary Drum Cooker-Cooler

184

Icarus Piping and Instrumentation Drawings

140 Gas Turbine With Combustion Chamber

Icarus Piping and Instrumentation Drawings

185

141 Horizontal Pressure Vessel With Boot

186

Icarus Piping and Instrumentation Drawings

141 Horizontal Jacketed Pressure Vessel With Boot

Icarus Piping and Instrumentation Drawings

187

142 Jacketed HT Three Phase Separator With Boot

188

Icarus Piping and Instrumentation Drawings

143 Jacketed Three Phase Horizontal Separator With Baffles

Icarus Piping and Instrumentation Drawings

189

144 Pressure Vessel Continuous Liquid/Liquid Separator

190

Icarus Piping and Instrumentation Drawings

144 Pressure Vessel Continuous Liquid/Liquid Separator With Boot

Icarus Piping and Instrumentation Drawings

191

150 Crude Oil Desalter

192

Icarus Piping and Instrumentation Drawings

151 Multi-Diameter Tower w/Therm. RB

Icarus Piping and Instrumentation Drawings

193

Appendix A: Symbols

The symbols represented in Appendix A are superseded by the symbols depicted in the Radpfs program. See the Radpfs drawing
application for the latest and most complete drawing symbols.

Piping Symbols
Regulating Valve

Check Valve

or

194

Icarus Piping and Instrumentation Drawings

Pressure Safety Valve

Flanged Connection

Spectacle Blind

Reducer

Rupture Disk

Drain

Expansion Joint

Icarus Piping and Instrumentation Drawings

195

Instrument Symbols

Note: Displayed on Operator Center CRT

with Digital Controls

196

Icarus Piping and Instrumentation Drawings

Appendix B:
Abbreviations

Icarus Piping and Instrumentation Drawings

197
197

198

Icarus Piping and Instrumentation Drawings

Index

0
003 Kettle Reboiler, 2
004 Horizontal Jacketed Pressure Vessel Continuous, 6
004 Horizontal Pressure Vessel Continuous, 4
005 Horizontal Jacketed Pressure Vessel Batch,
9
005 Horizontal Pressure Vessel Batch, 8
005 Vertical Jacketed Pressure Vessel Batch, 11
005 Vertical Pressure Vessel Batch, 10
006 Vertical Jacketed Pressure Vessel
Continuous, 14
006 Vertical Pressure Vessel Continuous, 12
007 Utility Boiler Unit, 16
007A Utility Boiler Unit, 17
007B Utility Boiler Unit, 18
007C Utility Boiler Unit, 19
008 Compressor, 20

Icarus Piping and Instrumentation Drawings

008A Compressor, 21
009 Air Cooled Heat Exchanger, 22
010 Horizontal Jacketed Pressure Vessel
Receiver, 25
010 Horizontal Pressure Vessel Receiver, 24
010 Vertical Jacketed Pressure Vessel Receiver,
27
010 Vertical Pressure Vessel Receiver, 26
011 Shell & Tube Heat Exchanger, 28
012 Process Heater Furnace, 30
013 Waste Heat Boiler, 32
014 Water Chiller, 33
015 Cooling Tower, 35
016 Motor Driven Centrifugal Pump, 37
017 Turbine (>500 HP, 375 KW, 40
018 Storage Vessel, 41
019 Horizontal Jacketed Pressure Vessel
Storage, 44
199
199

019 Horizontal Pressure Vessel Storage, 42

019 Vertical Jacketed Pressure Vessel Storage,
48
019 Vertical Pressure Vessel Storage, 46
020 Pumps Gear & Positive Displacement, 50
021 Reciprocating Compressor, 51
022 Horizontal Jacketed Pressure Vessel
Knockout, 55
022 Horizontal Pressure Vessel Knockout, 53
022 Vertical Jacketed Pressure Vessel Knockout,
59
022 Vertical Pressure Knockout, 57
023 Enclosed Jacket Reactor Continuous, 61
023 Open Top Jacket Reactor Continuous, 63
024 Refrigeration Compressor, 65
026 Vessel Heater, 66
027 Motor Driven In-Line Pump, 67
028 Particulate Scrubber, 69
029 Screw Conveyor, 70
030 Plate and Frame Filter, 71
031 Water-Sealed Vacuum Pump, 72
032 Fans and Blowers, 73
033 Cloth Bay Baghouse Dust Collector, 74
034 Cyclone Dust Collector, 75
036 Live Bottom Bin, 76
037 Cone Bottom Vessel, 77
038 Centrifuge Precipitator, 78
039 Horizontal Plate Filter, 79
040 Automatic Batch Centrifuge, 80

200

041
045
046
048
051
051
052
052
053
053
054
054
055
055
056
056
057
057
059
059
060
061
062
063
064
065
066
067
068

Manually Operated Centrifuge, 81

Fabric Cartridge Filter, 82
Tubular Fabric Filter, 83
Smokeless Flare, 84
DDT Gas Adsorption Service, 85
Tower Gas Adsorption Service, 86
DDT Liquid Adsorption Service, 87
Tower Liquid Adsorption Service, 88
DDT Extraction Service, 89
Tower Extraction Service, 90
DDT Absorber Service, 91
Tower Absorber Service, 92
DDT Stripper with Therm. RB, 93
Tower Stripper with Therm. RB, 94
DDT Desorber Service, 95
Tower Desorber Service, 96
Horizontal Thermosiphon Reboiler, 97
Vertical Thermosiphon Reboiler, 98
DDT Distillation with Therm. RB, 99
Tower Distillation with Therm. RB, 101
Continuous Centrifuge, 103
Mill, 104
Liquid Cyclone Separator, 105
Flotation Cell, 106
Conditioning Cell, 107
Crusher, 108
Scale, 109
Turbine (<500 HP, 375 KW), 110
Enclosed Reactor Vessel Continuous, 111

Icarus Piping and Instrumentation Drawings

068 Open Top Reactor Vessel Continuous, 113

069 Non-Smokeless Flare, 115
070 DDT Distillation with Kettle RB, 116
070 Tower Distillation with Kettle RB, 118
071 DDT Stripper with Kettle RB, 120
071 Tower Stripper with Kettle RB, 121
072 Air Compressor, 122
073 Graphite Heat Exchanger, 123
074 Reactor Vessel Batch, 124
074A Reactor Vessel Batch, 125
074B Reactor Vessel Batch, 126
074C Reactor Vessel Batch, 127
074D Reactor Vessel Batch, 128
075 Motor Water to Air Cooling, 129
076 Motor Driven Magnetic Drive Pipe, 130
080 Rectangular Tile Chest, 133
081 Cylindrical Tile Chest, 134
082 Vibrating Pressure Screen, 135
083 Bow Screen Low Consistency Stock Screen,
136
084 Deflaker, 137
085 Refiner, 138
088 Static Mixer, 139
088S Static Mixer With 316PS Pipe Material, 140
092 Off Machine Pulper, 141
093 On Machine Pulper, 142
099 Rotary Blender, 143
1
100 Culinary Air Filter, 144

Icarus Piping and Instrumentation Drawings

101 Culinary (Sterile) Steam Filter F-6, 145

102 Sanitary Pipe Filter, 146
103 Sanitary Pipe Strainer, 147
104 Sanitary Filter Press, 148
105 In-Line Metal Trap, 149
106 Fluming Reclaim Reel, 150
107 Shear Pump Homogenizer, 151
108 Homogenizer Piston Head, 152
109 High-Speed Mixer (Norman), 153
110 Rotary Bowl/Mixer Blender, 154
111 Kettle Blender Without Steam Jacket, 155
112 Horizontal Ribbon Blender, 157
112 Jacket Horizontal Ribbon Blender, 158
113 Reversing Anchor Agitator, 159
114 Double Motion Agitator, 160
115 Fluming Pump, 161
116 Air Diaphragm Sanitary Pump, 162
117 Sanitary Rotary Lobe Pump, 163
118 Sanitary Centrifugal Pump With Flow Control,
164
119 Jacket Sanitary Horizontal Tank, 166
119 Sanitary Horizontal Tank, 165
120 Jacket Sanitary Vertical Tank Atmospheric
Surge, 168
120 Sanitary Vertical Tank Atmospheric Surge,
167
121 Jacket Sanitary Vertical Tank Atmospheric
Mixing, 170

201
201

121 Sanitary Vertical Tank Atmospheric Mixing,

169
122 Super Sack Unloader With Screw Conveyor
Discharge, 171
123 Super Sack Unloader With Pneumatic
Conveyance Discharge, 172
124 Container Dumper Column, 173
125 Container Dumper Hydraulic Drum, 174
126 Container Dumper Hydraulic Bin, 175
127 Double Pipe Corrugated Exchanger, 176
128 Direct Steam Injection (DSI) Exchanger, 177
129 Plate & Frame Multizone Heat Exchanger, 178
131 Fluming Dewatering Shaker, 180
136 Sanitary Floor Scale, 182
137 Sanitary Screw Feeder, 183
138 Rotary Drum Cooker-Cooler, 184
140 Gas Turbine With Combustion Chamber, 185
141 Horizontal Jacketed Pressure Vessel With
Boot, 187
141 Horizontal Pressure Vessel With Boot, 186
142 Jacketed HT Three Phase Separator With
Boot, 188
143 Jacketed Three Phase Horizontal Separator
With Baffles, 189
144 Pressure Vessel Continuous Liquid/Liquid
Separator, 190
144 Pressure Vessel Continuous Liquid/Liquid
Separator With Boot, 191
150 Crude Oil Desalter, 192

202

151 Multi-Diameter Tower w/Therm. RB, 193

6
603 Kettle Reboiler, 3
604 Horizontal Jacketed Pressure Vessel
Continuous, 7
604 Horizontal Pressure Vessel Continuous, 5
606 Vertical Jacketed Pressure Vessel
Continuous, 15
606 Vertical Pressure Vessel Continuous, 13
609 Air Cooled Heat Exchanger, 23
611 Shell & Tube Heat Exchanger, 29
612 Process Heater Furnace, 31
614 Water Chiller, 34
615 Cooling Tower, 36
616 Motor Driven Centrifugal Pump, 38
616 Motor Driven Spare Centrifugal Pump, 39
619 Horizontal Jacketed Pressure Vessel
Storage, 45
619 Horizontal Pressure Vessel Storage, 43
619 Vertical Jacketed Pressure Vessel Storage,
49
619 Vertical Pressure Vessel Storage, 47
621 Reciprocating Compressor, 52
622 Horizontal Jacketed Pressure Vessel
Knockout, 56
622 Horizontal Pressure Vessel Knockout, 54
622 Vertical Jacketed Pressure Vessel Knockout,
60
622 Vertical Pressure Vessel Knockout, 58

Icarus Piping and Instrumentation Drawings

623 Enclosed Jacket Reactor Continuous, 62

623 Open Top Jacket Reactor Continuous, 64
627 Motor Driven In-Line Pump, 68
659 DDT Distillation with Therm. RB, 100
659 Tower Distillation with Therm. RB, 102
668 Enclosed Reactor Vessel Continuous, 112
668 Open Top Reactor Vessel Continuous, 114
670 DDT Distillation with Kettle RB, 117
670 Tower Distillation with Kettle RB, 119
676 Motor Driven Magnetic Drive Pump, 131
7
79 Vertical Tank Cryogenic, 132
A
Absorber service
double diameter tower, 91
single diameter tower, 92
AC. See Air Compressors (AC)
Agitated Tanks (AT)
COND CELL, 107
FLOAT CELL, 106
MACH PULP, 142
MIXER, 113, 114, 124, 125, 126, 127, 128
OFF MACH, 141
OPEN TOP, 63, 64, 113, 114
REACTOR, 61, 62
Air Compressor, 122
Air Compressors (AC)
CENTRIF M, 20

Icarus Piping and Instrumentation Drawings

CENTRIF T (See Drawings 17 and 67 for

turbines), 20
RECIP GAS, 51, 52
RECIP MOTOR, 51, 52
SINGLE 1 S, 122
SINGLE 2 S, 122
Air Cooled Heat Exchanger, 22, 23
Air Diaphragm Sanitary Pump, 162
ANSI magnetic drive pump, 130, 131
AT. See Agitated Tanks (AT), See Agitated Tanks
(AT)
Automatic Batch Centrifuge, 80
B
Bin, live bottom storage, 76
BL. See Blenders (BL), See Blenders (BL)
Blenders (BL)
ROTARY, 143
Boiler unit, 16, 17, 18, 19
Boiler, waste heat, 32
Bottom bin, live storage, 76
Bow Screen Low Consistency Stock Screen, 136
C
C. See Condensers (C)
Centrifugal Pumps (CP)
ANSI, 37, 38
ANSI PLAST, 37, 38
API 610, 37, 38
AXIAL FLOW, 37, 38
CANNED, 37, 38

203
203

CENTRIF, 37, 38
FLUME PUMP, 161
GEN SERVE, 37, 38
IN LINE, 67, 68
MAG DRIVE, 131
SAN PUMP, 164
Centrifuge Precipitator, 78
Centrifuges (CT)
ATM SUSPEN, 81
BATCH AUTO, 80
BATCH BOTM, 81
BATCH TOP, 81
BOT UNLOAD, 81
SCREEN BWL, continuous, 103
SOLID BOWL, 103
TOP UNLOAD, 81
VIBRATORY, continuous, 103
Check valve
piping symbol, 194
Cloth Bay Baghouse Dust Collector, 74
CO. See Conveyors (CO)
Compressor, 20, 21
Condensers (C)
BAROMETRIC, 28
Conditioning Cell, 107
Cone Bottom Vessel, 77
Container Dumper Column, 173
Container Dumper Hydraulic Bin, 175
Container Dumper Hydraulic Drum, 174

204

Continuous Centrifuge, 103

Conveyors (CO)
SCREW, 70
Cooling Tower, 35, 36
Cooling Towers (CTW)
COOLING, 35, 36
COOLING WP, 35, 36
CP. See Centrifugal Pumps (CP)
CR. See Crushers (CR)
Crude Oil Desalter, 192
Crusher, 108
Crushers (CR)
CONE, 108
GYRATORY, 108
CT. See Centrifuges (CT)
CTW. See Cooling Towers (CTW)
Culinary (Sterile) Steam Filter F-6, 145
Culinary Air Filter, 144
Cyclone Dust Collector, 75
Cylindrical Tile Chest, 134
D
DC. See Dust Collectors (DC)
DDT. See Double Diameter Towers (DDT),
PACKED/TRAYED
DDT Absorber Service, 91
DDT Desorber Service, 95
DDT Distillation with Kettle RB, 116, 117
DDT Distillation with Therm. RB, 99, 100
DDT Extraction Service, 89

Icarus Piping and Instrumentation Drawings

DDT Gas Adsorption Service, 85

DDT Liquid Adsorption Service, 87
DDT Stripper with Kettle RB, 120
DDT Stripper with Therm. RB, 93
Deflaker, 137
Direct connection
instrument symbol, 196
Direct Steam Injection (DSI) Exchanger, 177
Double Diameter Towers (DDT), PACKED/TRAYED
adsorber, 91
desorber, 95
distillation with kettle reboiler, 116, 117
distillation with therm. reboiler, 99, 100
extraction, 89
gas adsorption, 85
liquid adsorption, 87
stripper with kettle reboiler, 120
stripper with therm. reboiler, 93
Double Motion Agitator, 160
Double Pipe Corrugated Exchanger, 176
Drain
piping symbol, 194
Dust Collectors (DC)
CENTRIF PRE, 78
CLOTH BAY, 74
CYCLONE, 75
MULT CYCLO, 75
PULSE SHKR, 74
WASHERS, 69

Icarus Piping and Instrumentation Drawings

E
Electronic signal
instrument symbol, 196
Enclosed Jacket Reactor Continuous, 61, 62
Enclosed Reactor Vessel Continuous, 111, 112
Expansion joint
piping symbols, 195
Extraction service
double diameter tower, 89
single diameter tower, 90
F
F. See Filters (F)
Fabric Cartridge Filter, 82
Fans (FN)
CENTRIF, 73
PROPELLER, 73
ROT BLOWER, 73
VANEAXIAL, 73
Fans and Blowers, 73
Field erected boiler unit, 16, 17, 18, 19
Filters (F)
CARTRIDGE, 82
PLATE FRAME, 71
SAN AIR, 144
SAN PRESS, 148
SAN STEAM, 145
SAN STRAIN, 146
SPARKLER, 79
TUBULAR, 83

205
205

Flanged connection
piping symbol, 194
Flares (FLR)
DERRICK, non-smokeless, 115
DERRICK, smokeless, 84
GUYED, non-smokeless, 115
GUYED, smokeless, 84
HORIZONTAL, non-smokeless, 115
HORIZONTAL, smokeless, 84
SELF SUPP, non-smokeless, 115
SELF SUPP, smokeless, 84
Flotation Cell, 106
Flow indicator (gauge and rotometer)
instrument symbol, 196
FLR. See Flares (FLR)
Fluming Dewatering Shaker, 180
Fluming Pump, 161
Fluming Reclaim Reel, 150
FN. See Fans (FN)
FU. See Furnaces (FU)
Furnaces (FU)
BOX, 30, 31
HEATER, 30, 31
PYROLYSIS, 30, 31
REFORMER, 30, 31
VERTICAL, 30, 31
G
Gas adsorption service
double diameter tower, 85

206

single diameter tower, 86

Gas Compressors (GC)
CENTRIF (See Drawings 17 and 67 for turbines),
20
RECIP GAS. See
RECIP MOTOR. See
Gas Turbine With Combustion Chamber, 185
Gauge
flow indicator symbol, 196
GC. See Gas Compressors (GC)
Gear Pumps (GP)
CANNED RTR, 50
GEAR, 50
MECH SEAL, 50
GP. See Gear Pumps (GP)
Graphite heat exchanger, 123
H
HE. See Heat Exchangers (HE)
Heat Exchangers (HE)
AIR COOLED, 22, 23
CORRUGATED, 176
graphite heat exchanger, 123
HOT WATER, 179
MULTI PF, 178
SHELL TUBE (See Drawing 26 for
instrumentation), 28, 29
STM HE MOD, 177
WASTE HEAT, 32
High-Speed Mixer (Norman), 153

Icarus Piping and Instrumentation Drawings

Homogenizer Piston Head, 152

Horizontal Jacketed Pressure Vessel Batch, 9
Horizontal Jacketed Pressure Vessel - Continuous,
6
Horizontal Jacketed Pressure Vessel Continuous,
7
Horizontal Jacketed Pressure Vessel Knockout,
55, 56
Horizontal Jacketed Pressure Vessel Receiver,
25
Horizontal Jacketed Pressure Vessel Storage,
44, 45
Horizontal Jacketed Pressure Vessel With Boot,
187
Horizontal Plate Filter, 79
Horizontal Pressure Vessel Batch, 8
Horizontal Pressure Vessel Continuous, 4, 5
Horizontal Pressure Vessel Knockout, 53, 54
Horizontal Pressure Vessel Receiver, 24
Horizontal Pressure Vessel Storage, 42, 43
Horizontal Pressure Vessel With Boot, 186
Horizontal Ribbon Blender, 157
Horizontal Tanks (HT)
HORIZ DRUM, batch, 8
HORIZ DRUM, continuous, 4, 5
HORIZ DRUM, receiver, 24
HORIZ DRUM, storage, 41, 42, 53, 54
JACKETED, batch, 9
JACKETED, continuous, 6, 7

Icarus Piping and Instrumentation Drawings

JACKETED, receiver, 25
JACKETED, storage, 44, 45
Horizontal Thermosiphon Reboiler, 97
Hotwater Set With Shell & Tube Heat Exchanger,
179
HT. See Horizontal Tanks (HT)
I
In-Line Metal Trap, 149
In-line pump, motor driven, 67, 68
Interlock
instrument symbol, 196
J
Jacket Horizontal Ribbon Blender, 158
Jacket Sanitary Horizontal Tank, 166
Jacket Sanitary Vertical Tank Atmospheric
Mixing, 170
Jacket Sanitary Vertical Tank Atmospheric
Surge, 168
K
Kettle Blender With Steam Jacket, 156
Kettle Blender Without Steam Jacket, 155
Kettle Reboiler, 2, 3
L
Liquid adsorption service
double diameter tower, 87
single diameter tower, 88
Liquid Cyclone Separator, 105
Live Bottom Bin, 76

207
207

M
M. See Mills (M)
Manually Operated Centrifuge, 81
Mill, 104
Mills (M)
AUTOGENOUS, 104
BALL MILL, 104
ROD MILL, 104
Mixers (MX)
STATIC, 139, 140
Motor Driven Centrifugal Pump, 37, 38
Motor Driven In-Line Pump, 67, 68
Motor Driven Magnetic Drive Pipe, 130
Motor Driven Magnetic Drive Pump, 131
Motor Driven Spare Centrifugal Pump, 39
Motor Water to Air Cooling, 129
MX. See Mixers (MX), See Mixers (MX)
N
Non-Smokeless Flare, 115
O
Off Machine Pulper, 141
On Machine Pulper, 142
Open Top Jacket Reactor Continuous, 63, 64
Open Top Reactor Vessel Continuous, 113, 114
Orifice plate
instrument symbol, 196
P
Packaged boiler unit, 16, 17, 18, 19
Particulate Scrubber, 69

208

Plate & Frame Multizone Heat Exchanger, 178

Plate and Frame Filter, 71
Pneumatic signal
instrument symbol, 196
Precipitator, centrifuge, 78
Pressure safety valve
piping symbol, 194
Pressure screen, 135
Pressure vessel
horizontal - batch, 8
horizontal - continuous, 4, 5
horizontal - knockout, 53, 54
horizontal - receiver, 24
horizontal - storage, 42, 43
horizontal - with boot, 186
horizontal jacketed - batch, 9
horizontal jacketed - continuous, 6, 7
horizontal jacketed - knockout, 55, 56
horizontal jacketed - receiver, 25
horizontal jacketed - storage, 44, 45
horizontal jacketed - with boot, 187
vertical - batch, 10
vertical - continuous, 12, 13
vertical - knockout, 57, 58
vertical - receiver, 26, 27
vertical - storage, 46, 47, 48
vertical jacketed - batch, 11
vertical jacketed - continuous, 14, 15
vertical jacketed - knockout, 59, 60

Icarus Piping and Instrumentation Drawings

vertical jacketed - storage, 49

Process Heater Furnace, 30, 31
Pumps. See also Centrifugal Pumps (CP); Gear
Pumps (GP); Vacuum Pumps (VP)
DIAPHRAGM, 50
DUPLEX, 50
HD STOCK, 50
RECIP MOTR, 50
ROTARY, 50
SIMPLEX, 50
SLURRY, 50
TRIPLEX, 50
Pumps Gear & Positive Displacement, 50
R
RB. See Reboilers (RB)
Reactor
enclosed jacket - continuous, 61, 62
open top - continuous, 63, 64
Reactor vessel
batch, 124, 125, 126, 127, 128
enclosed - continuous, 111, 112
open top - continuous, 113, 114
Reboilers (RB)
KETTLE, 2, 3
THERMOSIPH - horizontal, 97
THERMOSIPH - vertical, 98
Reciprocating Compressor, 51, 52
Rectangular Tile Chest, 133
Reducer

Icarus Piping and Instrumentation Drawings

piping symbol, 194

Refrigeration Compressor, 65
Refrigeration Units (RU)
CENT COMPR, 33, 34
MECHANICAL, 65
Regulating valve
piping symbol, 194
Relay function
instrument symbol, 196
Reversing Anchor Agitator, 159
Rotary Blender, 143
Rotary Bowl/Mixer Blender, 154
Rotary Drum Cooker-Cooler, 184
Rotometer
flow indicator symbol, 196
RU. See Refrigeration Units (RU)
Rupture disk
piping symbol, 194
S
S. See Scales (S)
Sanitary Centrifugal Pump With Flow Control, 164
Sanitary direct steam heat module, 177
Sanitary double pipe corrugated exchanger, 176
Sanitary Filter Press, 148
Sanitary Floor Scale, 182
Sanitary Horizontal Tank, 165
Sanitary multi-zone plate & frame exchanger, 178
Sanitary Pipe Filter, 146
Sanitary Pipe Strainer, 147

209
209

Sanitary Rotary Lobe Pump, 163

Sanitary Screw Feeder, 183
Sanitary Vertical Tank - Atmospheric Mixing, 170
Sanitary Vertical Tank Atmospheric Mixing, 169
Sanitary Vertical Tank - Atmospheric Surge, 168
Sanitary Vertical Tank Atmospheric Surge, 167
Sanitary Weight Belt Feeder, 181
Scale, 109
Scales (S)
BELT, 109
SAN FLOOR, 182
TRACK, 109
TRUCK, 109
Screens (VS)
PRESSURE, 135
STOCK, 136
Screw Conveyor, 70
Scrubber, particulate, 69
SE. See Separation Equipment (SE)
Separation Equipment (SE)
WATER CYCL, 105
Shear Pump Homogenizer, 151
Shell & Tube Heat Exchanger, 28, 29
Single Diameter Towers (TW), PACKED/TRAYED
absorber, 92
desorber, 96
distillation with kettle reboiler, 118, 119
distillation with therm. reboiler, 101, 102
extraction, 90

210

gas adsorption, 86
liquid adsorption, 88
stripper with kettle reboiler, 121
stripper with therm. reboiler, 94
Smokeless Flare, 84
Solenoid
instrument symbol, 196
Spectacle blind
piping symbol, 194
ST. See Stock Treatments (ST)
Static Mixer, 139
Static Mixer With 316PS Pipe Material, 140
STB. See Steam Boilers (STB)
Steam Boilers (STB)
BOILER, 16, 17, 18, 19
STM BOILER, 16, 17, 18, 19
Stock Treatments (ST)
DEFLAKER CN, 137
DEFLAKER DK, 137
REFINER, 138
Storage Vessel, 41
Super Sack Unloader With Pneumatic Conveyance
Discharge, 172
Super Sack Unloader With Screw Conveyor
Discharge, 171
Symbols
instrumentation, 196
piping, 194

Icarus Piping and Instrumentation Drawings

T
Tower
Multi-Diameter with Therm RB, 193
Tower Absorber Service, 92
Tower Desorber Service, 96
Tower Distillation with Kettle RB, 118, 119
Tower Distillation with Therm. RB, 101, 102
Tower Extraction Service, 90
Tower Gas Adsorption Service, 86
Tower Liquid Adsorption Service, 88
Tower Stripper with Kettle RB, 121
Tower Stripper with Therm. RB, 94
Tubular Fabric Filter, 83
TUR. See Turbines (TUR)
Turbine (<500 HP, 375 KW), 110
Turbine (>500 HP, 375 KW, 40
Turbines (TUR)
CONDENSING, 40, 110
GAS, 110
NON COND, 40, 110
TW. See Single Diameter Towers (TW),
PACKED/TRAYED
U
Utility Boiler Unit, 16, 17, 18, 19
V
Vacuum Pumps (VP)
MECH BOOST, 72
MECHANICAL, 72
WATER SEAL, 72

Icarus Piping and Instrumentation Drawings

Vertical Jacketed Pressure Vessel Batch, 11

Vertical Jacketed Pressure Vessel Continuous,
14, 15
Vertical Jacketed Pressure Vessel Knockout, 59,
60
Vertical Jacketed Pressure Vessel Receiver, 27
Vertical Jacketed Pressure Vessel Storage, 48,
49
Vertical Pressure Knockout, 57
Vertical Pressure Vessel Batch, 10
Vertical Pressure Vessel Continuous, 12, 13
Vertical Pressure Vessel Knockout, 58
Vertical Pressure Vessel Receiver, 26
Vertical Pressure Vessel Storage, 46, 47
Vertical Tank Cryogenic, 132
Vertical Tanks (VT)
Cryogenic, 132
JACKETED, batch, 11
JACKETED, continuous, 14, 15
JACKETED, knockout, 59, 60
JACKETED, storage, 48, 49
MULTI WALL, batch, 10
MULTI WALL, continuous, 12, 13
MULTI WALL, knockout, 58
MULTI WALL, receiver, 26, 27
MULTI WALL, storage, 57
SAN TANK, 167, 168, 170
STORAGE, 46, 47
WOOD TANK, 46, 47

211
211

Vertical Thermosiphon Reboiler, 98

Vessel Heater, 66
Vibrating Pressure Screen, 135
VP. See Vacuum Pumps (VP)
VS. See Screens (VS)

212

VT. See Vertical Tanks (VT)

W
Waste Heat Boiler, 32
Water Chiller, 33, 34
Water-Sealed Vacuum Pump, 72

Icarus Piping and Instrumentation Drawings