Scribd
Upload
114 views

Lecture 9: Water For Life: SCCH 100 Integrated Chemistry

This document provides an overview of a lecture on water. It discusses the fundamental nature and properties of water, including its unique structure and ability to form hydrogen bonds. It also covers topics like the water cycle, water usage, water treatment, and water scarcity. Examples are given of different techniques for obtaining potable water, like desalination, distillation, and reverse osmosis. Key terms are defined, like electrolytes, molarity, and maximum contaminant levels. The document aims to educate about the essential role and characteristics of water.

Uploaded by

Nutt Chanchalit
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
114 views

Lecture 9: Water For Life: SCCH 100 Integrated Chemistry

This document provides an overview of a lecture on water. It discusses the fundamental nature and properties of water, including its unique structure and ability to form hydrogen bonds. It also covers topics like the water cycle, water usage, water treatment, and water scarcity. Examples are given of different techniques for obtaining potable water, like desalination, distillation, and reverse osmosis. Key terms are defined, like electrolytes, molarity, and maximum contaminant levels. The document aims to educate about the essential role and characteristics of water.

Uploaded by

Nutt Chanchalit
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 39

Lecture 9: Water for Life

SCCH 100 Integrated Chemistry


Instructor: Assist. Prof. Pasit Pakawatpanurut
Department of Chemistry
Faculty of Science, Mahidol University
Email: [email protected]
Textbook:
Chemistry in Context: Applying Chemistry to Society,
7th edition, C.H.Middlecamp (ed.), 2012.

Water has never lost its mystery. After at least two and a half
millennia of philosophical and scientific inquiry, the most vital of
the worlds substances remains surrounded by deep uncertainties.
Without too much poetic license, we can reduce these questions to
a single bare essential: What exactly is water?
Philip Ball, in Lifes Matrix: A Biography of Water,
University of California Press,
Berkeley, CA, 2001, p. 115

Do you know where your drinking water comes from?


Do you know if your drinking water is safe to drink?
How would you know?

Different Representations of Water

Lewis structures

Space-filling

Electronegativity is a measure of an atoms attraction for


the electrons it shares in a covalent bond.

On periodic
table, EN
increases

EN Values assigned by Linus Pauling,


winner of TWO Nobel Prizes.

A difference in the electronegativities


of the atoms in a bond creates a
polar bond.

O
H

Partial charges result from


bond polarization.

A polar covalent bond is a


covalent bond in which the
electrons are not equally shared,
but rather displaced toward the
more electronegative atom.

H2 has a nonpolar
covalent bond.

A water molecule is polar due to


polar covalent bonds and the shape of
the molecule.

NaCl
NaCl has an ionic
bond look at the
EN difference.
Na = 1.0

Cl = 2.9
DEN = 1.9

Polarized bonds
allow hydrogen
bonding to occur.

A hydrogen bond is an electrostatic attraction between an atom


bearing a partial positive charge in one molecule and an atom
bearing a partial negative charge in a neighboring molecule. The
H atom must be bonded to an O, N, or F atom.

Hydrogen bonds typically are only about one-fifteenth as strong


as the covalent bonds that connect atoms together within
molecules.
Hbonds are intermolecular bonds.
Covalent bonds are intramolecular bonds.

The boiling point is the temperature at which the (equilibrium) vapor


pressure of a liquid is equal to the external pressure.
The normal boiling point is the temperature at which a liquid boils when
the external pressure is 1 atm.

Water is a Unique Substance

Maximum Density
40 C
Density of Water

Ice is less dense than water

Hydrogen Bonding
in Water

The hydrogen-bonded lattice structure of the common form of ice. Notice the open channels
between layers of water molecules.

Water Footprint
Water is necessary to produce food:

Water Footprint
Water is necessary for products:

International Water Footprint (per capita)

Where Does Potable


(fit for consumption)
Drinking Water Come From?

Surface water: from lakes, rivers, reservoirs


Ground water: pumped from wells drilled into
underground aquifers

The average American uses


almost 100 gallons of water a day.
Nearly of the water entering
our homes goes down the drain.
Much of our clean water comes from
underground aquifers.
The Ogallala Aquifer is shown in dark blue.

While normally free of pollutants, groundwater can be contaminated


by a number of sources:
Abandoned mines
Runoff from fertilized fields
Poorly constructed landfills and septic systems
Household chemicals poured down the drain or on the ground

Access to safe drinking water varies widely across the world.

A solution is a homogeneous mixture of uniform composition.


Solutions are made up of solvents and solutes.

Substances capable of
dissolving other substances
usually present in the greater
amount.

Substances dissolved in a
solvent usually present in
the lesser amount.

When water is the solvent, you have an aqueous solution.

Concentration Terms
Parts per hundred (percent)

20 g of NaCl in 100 g of water is a 20% NaCl solution


Parts per million (ppm)

Parts per billion (ppb)


2 g Hg
2 10-6 g Hg 2 g Hg
2 ppb Hg

9
3
110 g H 2O 110 g H2 O 1 L H 2 O

Molarity (M) = moles solute


liter of solution
[ ] = concentration of
1.0 M NaCl solution
[NaCl] = 1.0 M = 1.0 mol NaCl/L solution

Also this solution is 1.0 M in Na+ and 1.0 M in Cl


[Na+] = 1.0 M and [Cl] = 1.0 M

How to prepare a 1.00 M NaCl solution:

solute
M = Lmol
of solution
Note you do NOT add
58.5 g NaCl to 1.00 L of
water.
The 58.5 g will take up
some volume, resulting in
slightly more than 1.00 L
of solution and the
molarity would be lower.

What is the concentration (in M and mass %) of


the resulting solution when you add 5 grams of
NaOH to 95 mL of water?

What is the molarity of glucose (C6H12O6) in a solution


containing 126 mg glucose per 100.0 mL solution?

When ions (charged particles) are in aqueous solutions,


the solutions are able to conduct electricity.

(a) Pure distilled water (nonconducting)


(b) Sugar dissolved in water (nonconducting): a nonelectrolyte
(c) NaCl dissolved in water (conducting): an electrolyte

Forming ions

Na

Na

Na+ ion

Na atom

Cl

Cl atom

+ 1 e-

+ 1 e-

Cl

Cl- ion

Some atoms form more than one stable ion.

Naming simple ionic compounds is easy.

Name the metallic element (cation) first, followed


by the nonmetallic element (the anion) second, but
with an ide suffix.

MgO

Mg is the metal; O is the nonmetal.

magnesium oxide
NaBr

Na is the metal; Br is the nonmetal.

sodium bromide

Ions that are themselves made up of more than one


atom or element are called polyatomic ions.

NaSO4 (sodium sulfate) dissociates in water to form:


Na+

The sulfate group


stays together in
solution.

and

Sodium ions
Sulfate ions

Naming polyatomic ionic compounds is also easy.

Name the cation first, followed by the anion second.


MgOH

Mg+ is the cation; OH is the anion.

magnesium
hydroxide

NH4Br
ammonium
bromide

NH4+ is the cation; Br is the anion.

Substances that will dissociate in


solution are called electrolytes.
Ions are simply charged
particles atoms or groups of
atoms.
They may be positively
charged cations.
Or negatively charged
anions.
Dissolution of NaCl in Water
NaCl(s)

H2O

Na+(aq) + Cl(aq)

The polar water molecules stabilize the ions


as they break apart (dissociate).

Simple generalizations about ionic compounds


allow us to predict their water solubility.

*Insoluble means that the compounds have extremely low solubility in water (less than 0.01 M).
All ionic compounds have at least a very small solubility in water.

Covalent molecules in solution

A sucrose molecule when dissolved in water,


sugar molecules interact with and become
surrounded by water molecules, but the sucrose
molecules do not dissociate like ionic
compounds do; covalent molecules remain
intact when dissolved in solution.
They will not conduct electricity; they are
nonelectrolytes.

Maximum Contaminant Level Goal (MCLG)


and Maximum Contaminant Level (MCL)

Schematic drawing of a typical municipal water treatment facility.

Making freshwater from saltwater

Desalinization a process that removes ions from saltwater

Making freshwater from saltwater continued


Distillation a separation process in which a liquid solution is
heated and the vapors are condensed and collected

Either perform distillation in laboratory (left) or use solar power (right).

Making freshwater from saltwater continued


Osmosis the passage of water through a semipermeable membrane from a
solution that is less concentrated to a solution that is more concentrated
Reverse Osmosis uses pressure to force the movement of water through a
semipermeable membrane from a solution that is more concentrated to a
solution that is less concentrated

LifeStraw created for developing countries to remove bacteria,


viruses, and parasites from water to use for drinking

Water, water, every where,


And all the boards did shrink;
Water, water, every where,
Nor any drop to drink.
And every tongue, through utter drought,
Was withered at the root;
We could not speak, no more than if
We had been choked with soot.
The Rime of the Ancient Mariner, excerpt
Samuel Taylor Coleridge

You might also like