Scribd
Upload
3K views

Alphion AONT-100C (SFU) User Guide

Alphion AONT-100C (SFU) User Guide

Uploaded by

Vishwanath Elechithaya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
3K views

Alphion AONT-100C (SFU) User Guide

Alphion AONT-100C (SFU) User Guide

Uploaded by

Vishwanath Elechithaya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 16

Alphion AONT-100C (SFU)

Catalog Number: AONT-100C-DOC-03


Part Number: 196-0000002 Rev 02

Alphion AONT-100C
(SFU) User Guide
Catalog Number: AONT-100C-DOC-03
Part Number: 196-0000002 Rev 02

PART NUMBER: 196-0000002 REVISION 02


PUBLISHED: MARCH 2008
ALPHION CORPORATION
196 PRINCETON HIGHTSTOWN ROAD
BUILDING 1A
PRINCETON JUNCTION, NJ 08550
WWW.ALPHION.COM

COPYRIGHT
Copyright 2008 Alphion Corporation, Inc.
All Rights Reserved. Printed in U.S.A.
Alphion AONT-100C (SFU) User Guide
Catalog Number: AONT-100C-DOC-03
Part Number: 196-0000002 Revision 02
March 2008

TRADEMARKS
All of the Alphion names, brand names, and product names referred to in this
Document, in particular, the name Alphion and its logo, are either registered
trademarks or trademarks of the Alphion Corporation. All other registered
trademarks or trademarks are the property of their respective owners.

LIMITED WARRANTY
Alphion warrants that this Document has been delivered free of all rightful
claims of any third person by way of infringement or the like of any copyright,
trade secret, or trademark. THIS DOCUMENT AND THE PRODUCTS
DESCRIBED THEREIN (COLLECTIVELY, THE DELIVERABLES) ARE
PROVIDED AS IS AND ALPHION MAKES NO OTHER WARRANTIES,
EXPRESS OR IMPLIED, AND DISCLAIMS ANY AND ALL OTHER
WARRANTIES WITH RESPECT TO THE DELIVERABLES, OR ANY
MODIFICATIONS THERETO, IN WHOLE OR IN PART, INCLUDING,
WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO
EVENT SHALL ALPHION OR ANY ALPHION EMPLOYEE BE LIABLE FOR
THE ACCURACY OR COMPLETENESS OF THE DELIVERABLES.

EXCLUSION OF CONSEQUENTIAL DAMAGES; LIMITATION OF


LIABILITY
ALPHION SHALL NOT, UNDER ANY CIRCUMSTANCES, BE LIABLE TO
BUYER FOR CONSEQUENTIAL, INCIDENTAL, SPECIAL OR INDIRECT
DAMAGES ARISING OUT OF OR RELATED TO THE DELIVERABLES,
EVEN IF ALPHION HAS BEEN APPRISED OF THE LIKELIHOOD OF SUCH
DAMAGES. IN NO EVENT SHALL ALPHION'S LIABILITY TO BUYER FOR
DAMAGES ARISING OUT OF OR RELATED TO THE DELIVERABLES
EXCEED THE AGGREGATE PRICE OF THE DELIVERABLES.

In this guide
Before you begin, please read all safety information on page 10.
This guide covers information on the following:

Connecting the AONT-100C on page 6

Verifying Connections on page 9

Troubleshooting on page 10

Safety on page 12

Figure 1

Alphion AONT-100C

Connecting the AONT-100C


To set up the connections for the AONT-100C, follow the
instructions below:

Connect the Network


The network connection should already be established. If it is not,
please contact your service provider.

Connect Power
Connect the power adapter to the power connector on the side of
the unit.
Plug the power adapter into an electrical outlet.
Verify that the POWER LED on the front of the unit is solid green.
Verify that the FIBER LED on the front of the unit is solid green
(not flashing).

Connect Data Service


Connect Ethernet cables to the Ethernet ports on the side of the unit.

Connecting the AONT-100C

Configure PPPoE on a Client in Windows XP


From your desktop, click Start. Choose Connect To>>
Show All Connections.
2
In the left panel, click Create a New Connection. The New
Connection Wizard opens.
3
Click Next.
4
Select Option 1, Connect to the Internet. Click Next.
5
Select Option 2, Set Up My Connection Manually. Click Next.
6
The Wizard asks How do you want to connect to the Internet?
Selection Option 2, Connect Using a Broadband connection that
requires a user name and password. Click Next.
7 Enter a name for the connection. Click Next.
8
Enter the Username and Password as configured in the server
(/etc/ppp/pap-secrets.)
9
Click Finish. A new connection now exists in the Network
Connections box.
10 To establish a PPPoE connection, right-click the Newly Created
Network Connection and select Connect.
11 Click Connect. The client dials the PPPoE Connection.
For instructions on how to configure PPPoE in a Microsoft Vista
operating environment, go to www.microsoft.com and search on the
term PPPoE.
1

Connecting the AONT-100C

Connect Phone Service


Connect phone wires to the phone ports on the side of the unit.
Link LED
(green)
ETH1
ETH2

Activity LED
(amber)

ETH3

Ethernet Ports

ETH4
TEL1
TEL2

Phone Ports
Reset

PWR

Figure 2

Reset
Power 12VDC

Connection Ports on Side of Unit

Connecting the AONT-100C

Verifying Connections
To verify that all the connections are active, check the LEDs on the
front of the unit.

Figure 3

LEDs on Front of Unit

They should appear as follows:


POWER

Green

FIBER

Green

DATA

Green (if data service is enabled)

UPDATE

Off (unless software upgrade is in progress)

TEST

Off

PHONE

Off (or green if phone is off the hook)

Verifying Connections

Troubleshooting
Below are the LED states with an explanation of each. If a problem is
indicated, see Getting Support.
POWER

FIBER

10

Solid green

Operating from AC power

Flashing green

Operating from battery power

Red

Operating from battery power


and battery is low

Solid green

Network is fully operational

Flashing green

Network is in ranging and


synchronizing processshould
change to solid green within
approximately 1 minute

Red

Unrecoverable failure of
hardware or software self test

Off

Unit is not operational

Troubleshooting

DATA

UPDATE

PHONE

Troubleshooting

Solid green

At least one Ethernet link is


active

Flashing green

At least one Ethernet link is


active and receiving/
transferring data

Off

Ethernet service is not enabled


or Ethernet link is not
established

Flashing green

Software download is in
progress. Do not turn power off
while flashing

Off

No software update in progress

Solid green

At least one phone is in use/off


the hook

Flashing green

At least one phone has been in


use/off the hook for more than
one hour

Off

Telephone service not


established or all phones
connected to unit are on the
hook

11

Getting Support
Please contact your local service provider for support. Be prepared to
provide the model and serial number of your unit.

Safety
Read the information below for important safety reminders.

Electrical Safety

Always use caution when handling electrical connections.


Never install electrical equipment in wet or damp conditions.
Be sure that the power source for the system is adequately rated
to assure safe operation and provides current overload protection.
Ensure nothing is allowed to rest on the power cable.
Ensure the power cable will not be walked or stepped on.
To avoid electric shock caused by over-voltage from the public
telephone network, do not connect this unit to an external
telephone connection.
Use only the power adapter supplied with this unit.

Caution: This unit does not contain any user-serviceable parts. Opening the
housing on this unit will void the warranty.

12

Safety

Laser Safety
Caution: Do not use controls, adjustments, or procedures other than specified.
This could result in hazardous laser radiation exposure.
Never look directly into an unterminated cable or connection.
Invisible laser radiation may be emitted from the ends of
unterminated fiber cables or connectors.
The AONT-100 uses a Class I laser device.

Safety

13

14

Safety

Catalog Number: AONT-100C-DOC-03


Part Number: 196-0000002 Rev 02
April 2008

You might also like