If you would like to print-out catalog, we've included covers at end of this file

Index

Page

Introduction

Multi-Clamp System

Cutaway
Planning
Mounting Methods
Junction Adapters
Multi-Clamp Bulkhead Spacer
Junction Adapters
Clamping Unit
Clamping Unit with Outside Holes
Single Clamping Unit
Double Clamping Unit
Split Bushings for Tube & Pipe
Split Bushings for Hose
Mounting Adapters

4
5
6-7
8
8
9
10
10
11
11
11
12
13

Reduces line noise by as much as 80%

Line sizes from 1/4" to 2" pipe
Easy channel mounting installation
High-quality materials of construction

Hydro-Strut

14

A rail mounted clamp with Multi-Clamp's

ability to clamp the line at the fitting
Installation is a snap - clamp, fitting, and
cushion are all in one package

Strut-Adapter

15

Vibration and shock-free rail mounting

Easily snap hose or tubing into elastomer
cushion
Space saving design

Walker-Strut

Easy channel mounting installation

Line sizes from 1/4" to 2" tube
High-quality materials of construction
Greatly reduces line noise

Silent-Strut

16-17

18

ED

Perfect for Mobile, Pneumatic,

Hydraulic, Electrical, HVAC, Fuel Line
Line sizes from 1/8" through 8"
Interchangeable with other brands

Hydro-Clamp

High-quality Styrene Butadiene Rubber

Easy mounting using pipe straps
Line sizes from 1/4" tube or pipe to
1-1/2" pipe or 2-1/8" tube

Econo-Isolator

U
TIN

O
ISC

19

20

HYDRO-CRAFT FOR ORDERS CALL 702-566-8798 (WEST COAST) OR 248-652-8100 (EAST COAST)

Index

Special fittings, lower operating pressures, and fewer

vibrating components may help prevent leaks; however,
this is not the complete answer.
One of the most crucial requirements is to clamp the
hydraulic lines and properly secure the fittings where
leaks can occur. Unclamped hydraulic tubing will reverberate as does a tuning fork. Fluid velocity, pressure, and
improper line size all contribute to high frequency vibration, shock, surge, and noise. Far more damaging is the
resultant flexing and coldworking of tubing, particularly
around couplings, resulting in split lines and fittings.
Now in our 56th year, Hydro-Craft is proud to present this
catalog of seven separate and unique clamping systems.
48 years ago, Hydro-Craft engineered and patented a
system for clamping hydraulic lines and securing
breakpoint fittings. This system is called the MULTICLAMP and is the industry standard in clamped
breakpoint systems.
Now, Hydro-Craft applies its expertise to include a full
range of clamping systems, including the WALKER-STRUT
channel-mounted system, the only clamp in the world
with this exclusive breakpoint feature. Also available are
the HYDRO-STRUT, SILENT-STRUT, Econo-Isolator, and
Hydro-Clamp channel mounting systems.
All systems are available in steel or 304 stainless steel.
MULTI-CLAMP is also available in aluminum.

Strut-Adapter, Hydro-Strut, Silent-Strut, and

Walker-Strut, are registered trademarks.
Multi-Clamp System U.S. Patent No. 3,397,431 & 3,414,220
Weld Adapter U.S. Patent No. 5,016,461
Strut-Adapter U.S. Patent No. 4,934,635 & 4,997,148

HC-CC/01A
Copyright 2006 Hydro-Craft Inc.

MULTI-CLAMP APPLICATIONS

HYDRO-CRAFT FOR ORDERS CALL 702-566-8798 (WEST COAST) OR 248-652-8100 (EAST COAST)

Index

The Multi-Clamp System

The MULTI-CLAMP SYSTEM enables you to route single
line runs, multiple runs of the same line diameters, or
multiple runs of various diameters. Multiple line runs
can be stacked to conserve space and make installations more rigid. Center line dimensions between all
lines remain the same, both horizontal and vertical,
when MULTI-CLAMPS are stacked. Mount an additional CLAMPING UNIT upon the existing MULTI-CLAMP
and attach it by threading a thread adapter into the
stacking nut. MULTI-CLAMPS are progressively built up
this way with the last being secured by a standard bolt
threaded into the STACKING NUT.
The MULTI-CLAMP SYSTEM provides definite reference
for measuring . . . so important in laying out line runs.
Quite an advantage over clamping devices that
change center distance both vertically and horizontally
with each change in line diameter. This advantage
can be fully realized when stacking line runs, because
with MULTI-CLAMP, both vertical and horizontal center
line distances remain specifically designed to give you
exact spacing and ease of installation.
MULTI-CLAMP is available in steel, stainless steel and
aluminum. The standard bushing material is Styrene
Butadiene.
Using the following charts, determine the series of
MULTI-CLAMP required and the number of clamps
required. Then refer to the dimensional data and
mounting instructions on the following pages.
LINE SIZE

MULTI-CLAMP SERIES

3/16- THRU 3/4-INCH O.D.

1/4- THRU 1-INCH O.D.
3/8- THRU 2-INCH O.D.

HC-10
HC-16
HC-32

1- THRU 2-1/2-INCH I.D.

2- THRU 4-INCH I.D.
5- THRU 6-INCH I.D.

HC-46
HC-72
HC-96

RECOMMENDED SUPPORT CLAMP SPACING*

TUBE O.D.
1/4-, 5/16-, 3/8-, 1/2- INCH
5/8-, 3/4-, 7/8-INCH
1-INCH
1-1/4-, 1-1/2-INCH
2-INCH & UP

APPROX. SPACE
BETWEEN SUPPORTS
3-FEET
4-FEET
5-FEET
7-FEET
7- TO 10-FEET

*From Fluid Power Handbook

HYDRO-CRAFT FOR ORDERS CALL 702-566-8798 (WEST COAST) OR 248-652-8100 (EAST COAST)

Index

A Socket-head stacking nut,

is used in combination with either

Multi-Clamp Exploded View

B a thread adapter,

C a self-tapping adapter, or

D a weld adapter, to secure

the lower Clamping Unit
directly to a mounting
surface. The Stacking
Nut is also used in
combination with
E a thread adapter,
lockwasher, and
standard nut
to attach the lower
Clamping Unit through a
drilled hole in mounting to
a plate of 3/8 inch (or less) thickness.
After inserting Junction Adapters
or Split Bushings and Lines into the
lower Clamping Unit, the upper
Clamping Unit is attached by positioning it
over the Lower Clamping Unit and placing
F a standard bolt and lockwasher,
through each mounting hole and
threading the bolt securely into
its corresponding Stacking Nut.
This completes the assembly
of a basic MULTI-CLAMP.
In bridge mounting between two
columns, or when a MULTI-CLAMP
is suspended from a column, either the

G
D
C

E thread adapter, lockwasher, and

standard nut, combination or
G a standard bolt and lockwasher,
can be used to secure the Stacking Nut
to the lower Clamping Unit.
H Mounting adapters are placed into
appropriate holes, the lines or Junction
Adapters installed, the upper Clamping
Unit attached, and the complete assembly
then secured by the Mounting Adapters
and standard bolts.
II Split bushings are placed into
appropriate holes, available with or
without ridge.

HYDRO-CRAFT FOR ORDERS CALL 702-566-8798 (WEST COAST) OR 248-652-8100 (EAST COAST)

Index

PLANNING GUIDE

Multi-Clamp

THE MULTI-CLAMP SYSTEM PROVIDES FOR VISUAL

PLANNING OF LINE INSTALLATIONS
This is a very important part of the total system. Line
diameters and routes, bend angles, places and types of
mounting, couplings, overhead suspension, and modulation of the installation with JUNCTION ADAPTERS can all be
visually pre-planned.
The first step in planning is visually determining the most
desirable route. You would want to avoid obstructions,
moving parts, service openings, and complex contours.
Plan around them. Then follow this procedure:
1. LINES AND DIRECTIONS
Determine the number of lines required and the directions
they must go. Determine the maximum O.D. of the lines.
This will enable you to select the proper CLAMPING UNIT
series.
2. EXAMINE CHARACTERISTICS OF PRODUCT
If the product to be piped consists of more than one
component . . . such as a machine tool with hydraulic and
coolant tanks . . . plan with the JUNCTION ADAPTER.
Remember each unit of the machine tool can then be
easily separated at one MULTI-CLAMP and just as easily
reconnected.
3. ROUTING
First, consider routing the line runs along the base of the
product, being cautious of the obstructions, moving parts,
service openings, and contours previously mentioned. If
these are prohibitive, consider attaching upright spars to
the product for overhead runs, or routing the runs overhead in suspension.
4. INSTALLATION
Having determined the route, select the proper CLAMPING
UNIT for the maximum O.D. of the required lines. Then,
cut lengths to provide sufficient line openings.
Mount the lower CLAMPING UNIT. (Refer to mounting
methods shown on pages 6-7.) An excellent feature of this
system is the mounted CLAMPING UNIT becomes a reference point for measuring line runs . . . eliminates trying to
measure "in-the-air".
Now, position the first line and use this line as a basic guide
for measurement; merely add the center distance to the
next line opening for the next line, and so on.
Add JUNCTION ADAPTER, when applicable, or slip appropriate sized SPLIT BUSHING over each line and seat into
lower CLAMPING UNIT.
Position the upper CLAMPING UNIT and secure it to the
lower CLAMPING UNIT. (Refer to exploded view.)

NOTE: If a large number of lines are to be run,

the following procedure is recommended:
Cut lower CLAMPING UNIT in lengths for total
number of lines to be installed. Next, cut
upper CLAMPING UNIT in lengths for 2 lines
only. Installation is then completed by securing
only two lines at a time as the run progresses.

HYDRO-CRAFT FOR ORDERS CALL 702-566-8798 (WEST COAST) OR 248-652-8100 (EAST COAST)

Index

Multi-Clamp
Multi-Clamp

WELD ADAPTER

SUGGESTED
MOUNTING METHODS

1. Insert Weld Adapter into mounting hole

of lower Clamping Unit.

Actual installation of a line run,

using the MULTI-CLAMP SYSTEM,
begins with the mounting of the
lower Clamping unit. Various
methods are available to the
installer for securing the lower
Clamping Unit to the machine
base, pillar, upright spar,
mounting plate, etc.

Secure Weld Adapter to lower Clamping Unit

with socket head stacking nut (finger tight).
Repeat Steps 1 and 2 for each hole of
Clamping Unit.
Weld Adapter attached to lower clamping
unit provides the basis of this method.
2. Position assembled unit onto
mounting surface.
3. Weld base of each Weld Adapter
to mounting surface.
4. Tighten all Stacking Nuts securely and
proceed with remainder of installation.

MULTI-CLAMP CLAMPING UNITS ARE AVAILABLE IN LENGTHS UP TO 48-INCHES THAT YOU CAN CUT TO LENGTH

THREAD ADAPTER FOR TAPPED HOLE

SELF-TAPPING ADAPTER

1. Using a scale, or the Clamping Unit itself,

measure and mark location on mounting
surface for each mounting hole on the lower
Clamping Unit. Note that all mounting holes
are spaced at even increments.

1. Using a scale, or the Clamping Unit itself,

measure and mark location on mounting
surface for each mounting hole of the lower
Clamping Unit. Note that all mounting holes
are spaced at even increments.

2. Drill appropriate size hole for the particular

MULTI-CLAMP series being installed.

2. Drill appropriate size hole for particular

MULTI-CLAMP series being installed.

3. Using tapping tool, tap each hole with

appropriate size thread for series being
installed.

3. Place Self-tapping Adapter into speed

wrench and insert into each hole until
seated securely.

4. Assemble required number of Stacking

Nuts and Thread Adapters for each mounting
hole.

4. Align lower Clamping Unit over Selftapping Adapters and position by placing
the Adapters through mounting holes.

5. Position lower Clamping Unit over tapped

holes and thread assembled Thread AdapterStacking Nut into each until finger tight.

5. Thread Stacking Nut onto each Selftapping Adapter until finger tight.

6. Tighten all Stacking Nuts securely and

proceed with remainder of installation.

6. Tighten all Stacking Nuts securely and

proceed with remainder of installation.

HYDRO-CRAFT FOR ORDERS CALL 702-566-8798 (WEST COAST) OR 248-652-8100 (EAST COAST)

Index

STANDARD BOLT, LOCKWASHER AND

STACKING NUT FOR DRILLED HOLE

Multi-Clamp

1. Using a scale, or the Clamping Unit itself,

measure and mark location on mounting
surface for each mounting hole of the lower
Clamping Unit. Note that all mounting holes
are spaced at even increments.
2. Drill appropriate size hole for particular
MULTI-CLAMP series being installed.
3. Position lower Clamping Unit over tapped
holes. Place standard bolt and lockwasher
through drilled hole and through lower
Clamping Unit. Attach with stacking nut
finger tight.

THREAD ADAPTER FOR DRILLED HOLE

1. Using a scale, or the Clamping Unit itself,
measure and mark location on mounting
surface for each mounting hole of the lower
Clamping Unit. Note that all mounting holes
are spaced at even increments.
2. Drill appropriate size hole for particular
MULTI-CLAMP series being installed.
3. Assemble required number of Stacking
Nuts and Thread Adapters for each mounting hole.
4. Position lower Clamping Unit over drilled
holes. Place threaded portion of assembled
Thread Adapter-Stacking Nut through both
lower clamping unit mounting hole and
drilled hole.
5. Attach lockwasher and nut.

HYDRO-CRAFT FOR ORDERS CALL 702-566-8798 (WEST COAST) OR 248-652-8100 (EAST COAST)

Multi-Clamp

Index
The Hydro-Craft line of patented junction adapters
are designed to eliminate traditional union problems.
They are engineered to fit securely into the
MULTI-CLAMP and STRUT-ADAPTER systems.
Offered in a wide range of standard sizes in JIC,
NPT, SAE, and O-Ring Face Seal style, they are
manufactured of 12L14 Leadloy.
They are a critical element in both junction clamping
systems, and are available in sizes as listed in the chart
below. (See page 9 for dimensions).

Hydro-Craft
Junction
Adapters
A Fitting Solution

JIC MALE
37 FLARE

FEMALE
NPT

FEMALE
SAE

O-RING
FACE SEAL

1/4"
3/8"
1/2"
5/8"
3/4"
7/8"
1"

3/8"
3/4"
1-1/4"

3/4-16
1-1/6-12
1-5/8-12

3/8"
1/2"
5/8"
3/4"
1"
1-1/4"
1-1/2"

Call for information and quantity requirements on

special junction adapters for Strut-Adapter and MULTICLAMP, such as inverted flare, Japanese and BSP sizes.
Fittings are available in a wide range of materials also,
including stainless steel and brass.

The MULTI-CLAMP Bulkhead Spacer is designed to

allow adapters for the 2" HC-16 Series MULTI-CLAMP to
be applied to the 3" HC-32 Series MULTI-CLAMP. The
Bulkhead is a rugged molded thermoplastic elastomer
that can withstand the effects of most oils, chemicals,
and cleaning compounds from -48F to 275F.
All of the HC-16 Series Junction Adapters can be
used in the HC-32 Series MULTI-CLAMPS
The need for bulky and heavy adapters and
bushing reducers is eliminated

Multi-Clamp
Bulkhead Spacer

The cost to apply the junction adapters is reduced to approximately 1/6 of the previous cost
Metal to metal contact is replaced by a cushion
.42

How To
Order
Specify the
Bulkhead Spacer
by part number
HC-32-BS-16

1.20

.10 R
1.50
1.75
2.12
2.25

.70

.58

.06 R

.25 .22

HYDRO-CRAFT FOR ORDERS CALL 702-566-8798 (WEST COAST) OR 248-652-8100 (EAST COAST)

Index

37 FLARE MALE JUNCTION ADAPTER

PART
NO.
SERIES 1-1/2"
B-10-4
B-10-6
B-10-8
B-10-10
SERIES 2"
B-16-4
B-16-6
B-16-8
B-16-10
B-16-12
B-16-14
B-16-16

TUBE
SIZE

1/4
3/8
1/2
5/8

.76
.76
.87
.96

.56

1/4
3/8
1/2
5/8
3/4
7/8
1

.76
.76
.87
.96
1.07
1.10
1.10

.56

1-1/2

Multi-Clamp

F
THREAD

1-9/64

27/32

1-23/32 1-13/64

7/16-20
9/16-18
3/4-16
7/8-14

.09 R

7/16-20
9/16-18
3/4-16
7/8-14
1-1/6-12
1-3/16-12
1-5/16-12

E D
C

FEMALE JUNCTION ADAPTER

PART
NO.

G
THREAD

BSAE-10-8
BSAE-16-12
BSAE-32-20

1
1-1/2
2-1/4

2-13/16
3-1/8
2-5/8

.843
1.20
2.12

.84
.93
.56

.28
.34
.25

.56
.56
.68

3/4-16 SAE
1-1/16-12 SAE
1-5/8-12 SAE

FEMALE JUNCTION ADAPTER-PIPE

PART
NO.

D E F E D

THREAD

BFM-10-6-P
BFM-16-12-P
BFM-32-20-P

1
1-1/2
2-1/4

2-13/16
3-1/8
2-5/8

.843
1.20
2.12

.84
.93
.56

.28
.34
.25

.56
.56
.68

3/8 N.P.T.
3/4 N.P.T.
1-1/4 N.P.T.

O-RING FACE SEAL MALE JUNCTION ADAPTER

PART
NO.

TUBE
SIZE

FB-10-6
FB-10-8
FB-10-10
FB-16-6
FB-16-8
FB-16-10
FB-16-12
FB-16-16
FB-32-20
FB-32-24

3/8
1/2
5/8
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2

1
1
1
1.5
1.5
1.5
1.5
1.5
2.25
2.25

H
THREAD

1.98
2.12
2.32
1.98
2.12
2.32
2.42
2.48
2.98
2.98

.43
.50
.60
.43
.50
.60
.65
.68
.68
.68

.28
.28
.28
.34
.34
.34
.34
.34
.437
.437

.56
.56
.56
.56
.56
.56
.56
.56
.75
.75

.26
.38
.48
.26
.38
.48
.61
.81
1.02
1.26

.84 11/16-16
.84 13/16-16
.84
1-14
1.20 11/16-16
1.20 13/16-16
1.20
1-14
1.20 1-3/16-12
1.20 1-7/16-12
2.12 1-11/16-12
2.12
2-12

G F
A

C D EDC

All dimensions are approximate in inches

HYDRO-CRAFT FOR ORDERS CALL 702-566-8798 (WEST COAST) OR 248-652-8100 (EAST COAST)

Index

Multi-Clamp
How To Order
Choose the part number, select no symbol for
plated steel, SS for stainless steel, or A for aluminum.
Clamps and bushings can be ordered separately.
Example: HC-16-3-4 - SS
This example would provide you with a 2" clamping
unit, with 4 mounting holes, in stainless steel.
Clamps can be ordered in special sizes, please call.

CLAMPING UNIT
PART
NO.

1-1/2

3/4

47/64

5/32

14 GA.

11/32

27/64

No. of
Holes

SERIES HC-10 1-1/2"

HC-10-2
2-15/16
HC-10-3
4-13/32
HC-10-4
5-15/16
HC-10-5
7-9/64
HC-10-6
8-15/16
HC-10-7
10-3/16
HC-10-32
48
SERIES HC-16 2"
HC-16-2
3-7/8
HC-16-3
5-41/64
HC-16-4
7-57/64
HC-16-5
9-43/64
HC-16-6
11-43/64
HC-16-7
13-5/8
HC-16-24
48
SERIES HC-32 3"
HC-32-2
6-49/64
HC-32-3
8-45/64
HC-32-4
11-45/64
HC-32-5
14-45/64
HC-32-6
17-45/64
HC-32-16
48

2
3
4
5
6
7
32

23/32
23/32
23/32
19/32
23/32
19/32

1-1/2 1-15/32
1-15/32
1-15/32
1-11/32
1-15/32
1-11/32

2
3
4
5
6
7
24

15/16
27/32
15/16
27/32
13/16
13/16

1-15/16
1-27/32
1-15/16
1-27/32
1-13/16
1-13/16

3/4

5/32

14 GA.

11/32

19/32

2
3
4
5
6
16

1-7/8
1-13/32
1-13/32
1-13/32
1-13/32

3-3/8
2-63/64
2-51/64
2-55/64
2-55/64

1-1/2

1/4

11 GA.

13/32

1-1/16

K
DIA

CLAMPING UNIT WITH OUTSIDE MOUNTING HOLES

PART
NO.

SERIES HC-10
HC-10-1-2
HC-10-2-3
HC-10-3-4
HC-10-4-5
HC-10-5--6
SERIES HC-16
HC-16-1-2
HC-16-2-3
HC-16-3-4
HC-16-4-5
SERIES HC-32
HC-32-1-2
HC-32-2-3
HC-32-3-4
HC-32-4-5

B
NO. OF HOLES

L
RADIUS

L
RADIUS

No. of
Holes

J
C

D
A

1-1/2"
2-3/16
3-51/64
5-19/64
6-51/64
8-19/64

1
2
3
4
5

11/32
25/64
25/64
25/64
25/64

1-1/2
1-1/2
1-1/2
1-1/2
1-1/2

2-21/32
4-49/64
6-51/64
8-51/64

1
2
3
4

21/64
25/64
25/64
25/64

2
2
2
2

4
6-55/64
9-55/64
12-55/64

1
2
3
4

1/2
27/64
27/64
27/64

3
3
3
3

2"
B
NO. OF HOLES

3"

10

HYDRO-CRAFT FOR ORDERS CALL 702-566-8798 (WEST COAST) OR 248-652-8100 (EAST COAST)

I
DOUBLE
METAL
THICKNESS

Index

Multi-Clamp

SINGLE CLAMPING UNIT WITH OUTSIDE MOUNTING HOLES

PART
NO.

SERIES HC-46
HC-46-1
3
SERIES HC-72
HC-72-1
3-3/4
SERIES HC-96
HC-96-1
5-1/2

1-3/4

2-1/2

1/2

3/8 R
TYP

2-1/2

6-1/2

3-1/4

1/2

7-1/2

3/16
STOCK

6-1/2
E

3-3/4

9-3/16

4-9/16

3/4

11

3/4

G
F

1
2-1/2

9-1/2

17/32 DIA-2 HOLES- 1-3/8

IN LINE- 3 PLACES 11/16

3/8 R
TYP

1-3/4

1-3/4

11

10

2-1/2

6-1/2

2-1/2

2-1/2

6-1/2

14

13

3-1/4

6-1/2

D
RADIUS

C
RADIUS

SERIES HC-46
HC-46-2
3
SERIES HC-72
HC-72-2
3-3/4

1-3/8
11/16

B
RADIUS

DOUBLE CLAMPING UNIT

PART
NO.

17/32 DIA-2 HOLESIN LINE- 2 PLACES

3/4

E
G
F

1/2
3/16 STOCK

1
2-1/2

NEW! HC-46-4 now available!!

SPLIT BUSHING FOR TUBE AND PIPE APPLICATIONS

PART
NO.
SERIES HC-10
G-10-3
G-10-4
G-10-5
G-10-6
G-10-8
G-10-10
G-10-12
SERIES HC-16
G-16-4
G-16-5
G-16-6
G-16-8
G-16-10
G-16-12
G-16-14
G-16-16

TUBE
SIZE

B
DIA.

C
LENGTH

1-1/2"
3/16
1/4
5/16
3/8
1/2
5/8
3/4

.172
.234
.297
.359
.484
.609
.734

4.4
5.9
7.5
9.1
12.3
15.5
18.6

7/8

1-5/16

1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
PIPE SIZE
1/4
3/8
1/2
3/4

.234
.297
.359
.484
.609
.734
.859
.984

5.9
7.5
9.1
12.3
15.5
18.6
21.8
25.0

1-1/4

1-5/16

.516
.656
.813
1.031

13.1
16.7
20.7
26.2

1-1/4

1-5/16

.234
.359
.484
.609
.734
.859
.984
1.234
1.484
1.734
1.984

5.9
9.1
12.3
15.5
18.6
21.8
25.0
31.3
37.7
44.0
50.4

2-3/16

1-3/4

.516
.656
.813
1.031
1.297
1.641
1.875

13.1
16.7
20.7
26.2
32.9
41.7
47.6

2-3/16

2"

G-16-4-P
G-16-6-P
G-16-8-P
G-16-12-P
SERIES HC-32 3"
G-32-4
G-32-6
G-32-8
G-32-10
G-32-12
G-32-14
G-32-16
G-32-20
G-32-24
G-32-28
G-32-32
G-32-4-P
G-32-6-P
G-32-8-P
G-32-12-P
G-32-16-P
G-32-20-P
G-32-24-P

A
A-1
INCHES (mm)

1/4
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
PIPE SIZE
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2

1-3/4

How To Order

Select by
part number. Call for pricing and
quantity requirements.

All dimensions are approximate in inches

HYDRO-CRAFT FOR ORDERS CALL 702-566-8798 (WEST COAST) OR 248-652-8100 (EAST COAST)

11

Index

SPLIT BUSHING FOR HOSE APPLICATIONS

Multi-Clamp

PART
NO.
SERIES HC-10 1-1/2"
SG-10-6
SG-10-4-P
SG-10-9
SG-10-11
SG-10-12
SERIES HC-16 2"
SG-16-4
SG-16-6
SG-16-7
SG-16-8
SG-16-4-P
SG-16-9
SG-16-10
SG-16-6-P
SG-16-12
SG-16-8-P
SG-16-14
SG-16-15
SG-16-16
SG-16-12-P
SERIES HC-32 3"
G-32-17
G-32-19
G-32-23
G-32-25
G-32-26
G-32-27
G-32-29
G-32-31
SERIES HC-46 5"
G-46-25
G-46-27
G-46-31
G-46-32
G-46-33
G-46-34
G-46-40
G-46-43
G-46-39

For HOSE
applications

A
INCHES

A-1
(mm)

.359
.516
.562
.656
.734

9.1
13.1
14.3
16.7
18.6

1-5/16

.234
.359
.400
.484
.516
.562
.609
.656
.734
.813
.859
.922
.984
1.031

5.9
9.1
10.2
12.3
13.1
14.3
15.5
16.7
18.6
20.7
21.8
23.4
25.0
26.2

1-1/2

1-5/16

1.125
1.200
1.406
1.453
1.560
1.703
1.750
1.906

28.6
30.5
35.7
36.9
39.6
43.3
44.5
48.4

2-23/64

1-3/4

1.453
1.703
1.785
2.00
2.040
2.169
2.500
2.688
2.825

36.9
43.3
45.3
50.8
51.8
55.1
63.5
68.3
71.8

3-7/8

2-53/64

SPLIT BUSHING FOR PIPE APPLICATIONS

For TUBE or PIPE
applications

SERIES HC-46
G-46-16-P
G-46-20-P
G-46-24-P
G-46-32-P
G-46-40-P
SERIES HC-72
G-72-32-P
G-72-40-P
G-72-48-P
G-72-56-P
G-72-64-P
SERIES HC-96
G-96-80-P
G-96-96-P

12

PART
NO.

PIPE
SIZE

A
INCHES

A-1
(mm)

1
1-1/4
1-1/2
2
2-1/2

1.297
1.644
1.884
2.359
2.859

32.9
41.8
47.9
59.9
72.6

3-55/64

2-3/4

2
2-1/2
3
3-1/2
4

2.359
2.859
3.484
3.984
4.484

59.9
72.6
88.5
101.2
113.9

5-5/16

2-3/4

5
6

5.547
6.609

140.9
167.9

7-7/8

2-3/4

HYDRO-CRAFT FOR ORDERS CALL 702-566-8798 (WEST COAST) OR 248-652-8100 (EAST COAST)

Index

Multi-Clamp

MOUNTING ADAPTER (for pillar or spar mounting)

MULTI-CLAMP
SERIES

PART
NO.

A
DIA.

B
DIA.

C
DIA.

F
( .003)

HC-10-1-1/2"

B-10-MO

11/32

9/32

1-1/16

.510

HC-16-2"

B-16-MO

1-3/8

11/32

9/32

1-1/16

.510

HC-32-3"

B-32-MO

2-1/4

.8390 MAX
.8350 MIN
1.193 MAX
1.187 MIN
2.128 MAX
2.122 MIN

13/32

27/64

1-9/16

.687

A B C

F
E

SOCKET-HEAD STACKING NUT (one required for each mounting hole)*

PART
NO.

MULTI-CLAMP
SERIES
HC-10
HC-16
HC-32
HC-46
HC-72
HC-96

N-10
N-16
N-32
N-46
N-72
N-96

B
DIA.

1.335
1.800
2.780
4.500
6.00
8.750

1/2
1/2
11/16
1
1
1

C
D
THREAD CHAMFER
5/16-18
5/16-18
3/8-16
1/2-13
1/2-13
1/2-13

1/32x45
1/32x45
1/16x30
1/16x30
1/16x30
1/16x30

5/16
5/16
3/8
1/2
1/2
1/2

7/32
7/32
9/32

D
B

E
F

THREAD ADAPTER (for installing or stacking)*

MULTI-CLAMP
SERIES

PART
NO.

D
THREAD

HC-10 & HC-16

HC-32
HC-46,72 & 96

T-10
T-32
T-72

.62
.88
.50

.62
.88
.62

1.38
2
1.50

5/16-18
3/8-16
1/2-13

D
B

SELF-TAPPING ADAPTER (for drilled hole mounting)

MULTI-CLAMP
SERIES

PART
NO.

A
THREAD

HC-10 & HC-16

ST-10

5/16-18

3/4

E
E

D
5/8

1/2

.577

1.50

C
D

MULTI-CLAMP
SERIES

PART
NO.

C
THREAD

HC-10 & HC-16

HC-32
HC-46,72 & 96

W-10 W-16
W-32
W-72

.44
.47
.53

.75
1
1.5

5/16-18
3/8-16
1/2-13

1
1.25
1.375

REDUCER ADAPTER (for stacking HC-10 on HC-32 series clamp)

PART
NO.

A
THREAD

B
THREAD

R-32

5/16-18

3/8-16

.75

.50

F
G

E
HC-32

.575

PART
NO.

MULTI-CLAMP
SERIES

A
THREAD

HB-10
HN-10
HB-32
HN-32
HB-72
HN-72
LOCKWASHER
HW-10
HW-32
HW-72

HC-10 & HC-16

5/16-18
5/16-18
3/8-16
3/8-16
1/2-13
1/2-13
A
5/16
3/8
1/2

7/32
17/64
1/4
21/64

1/2
1/2
9/16
9/16

0.577
0.577
0.650
0.650

3/4

HC-46, 72 & 96
HC-10 & HC-16
HC-32
HC-46, 72 & 96

2.25

STANDARD PARTS*

HC-32

3/8

WELD ADAPTER (for weld mounting)

MULTI-CLAMP
SERIES

D
C

1
1-1/2

How To Order

Select by
part number. *Add SS to end of part
number for stainless steel

HYDRO-CRAFT FOR ORDERS CALL 702-566-8798 (WEST COAST) OR 248-652-8100 (EAST COAST)

13

Index

The Hydro-Strut Clamping System is the most

effective clamp available - greatly reducing noise
due to line shock and vibration!
The Hydro-Strut clamping system is designed
for hydraulic, pneumatic, electrical, and fuel line
applications, where it retains, guides, protects, and
spaces line runs uniformly. This design can easily
maintain equal centers, even when the line size varies.
Lines are rigid, have a neat appearance, and install
easily through channel mounting.
Independent testing shows the Hydro-Strut clamping
system, using Styrene Butadiene Rubber (SBR) bushings, to be 80 percent more efficient at reducing noise
than conventional cushion clamping systems. The
SBR bushing, which provides the cushion for the
reduced line noise, is compression molded, and
selected for its excellent compatibility with industrial
solvents, fuels, and hydraulic fluids. The clamp is
available in either stainless or plated steel.

Hydro-Strut
Clamping System

Available standard sizes for tube, hose and pipe range

from 1/4-inch through 2-inch. Special sizes are available, please contact the factory for more information.

Reduces line noise by as

much as 80%
Available in wide range of
line sizes from 1/4" to 2"
Easy installation through
channel mounting
High-quality materials of
construction

How To Order
Simply choose the clamp size, select no symbol for steel or SS for
stainless steel, and the appropriate bushing size. Clamps and
bushings are ordered separately.
Example: Clamp HCS-32-M - SS and Bushing RSG-32-10
This example would provide you with our larger, stainless steel
clamp, and a bushing for 5/8 tube.

CLAMP NO.
HCS-16-M
BUSHING
No.
RSG-16-4
RSG-16-6
RSG-16-8
RSG-16-10
RSG-16-12
RSG-16-14
RSG-16-16
RSG-16-20

1.250
1.625

14

CLAMP NO.

1.95

1.20

2.80

TUBE
SIZE

1/4
3/8
1/2
5/8
3/4
7/8
1
1-1/4
Pipe Size
RSG-16-4P
1/4
RSG-16-6P
3/8
RSG-16-8P
1/2
RSG-16-12P
3/4
RSG-16-16P
1

D
D-1
INCHES (mm)
.234
.359
.484
.609
.734
.859
.984
1.234

5.9
9.1
12.3
15.5
18.6
21.8
25.0
31.3

.516
.656
.813
1.031
1.297

13.1
16.7
20.7
26.2
32.9

HCS-32-M

2.95

1.70

3.77

BUSHING
No.

TUBE
SIZE

RSG-32-6
RSG-32-8
RSG-32-10
RSG-32-12
RSG-32-14
RSG-32-16
RSG-32-20
RSG-32-24
RSG-32-32

3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
2
Pipe Size
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2

RSG-32-4P
RSG-32-6P
RSG-32-8P
RSG-32-12P
RSG-32-16P
RSG-32-20P
RSG-32-24P
RSG-32-32P

D
D-1
INCHES (mm)
.359
.484
.609
.734
.859
.984
1.234
1.484
1.984

9.1
12.3
15.5
18.6
21.8
25.0
31.3
37.7
50.4

.516
656
.813
1.031
1.297
1.640
1.870
2.350

13.1
16.7
20.7
26.2
32.9
41.7
47.5
59.7

HYDRO-CRAFT FOR ORDERS CALL 702-566-8798 (WEST COAST) OR 248-652-8100 (EAST COAST)

Index

A Critical Junction . . .
. . . in any hydraulic system is the connection
point between tube and hose, hose and pipe, etc.
Improperly secured, they will coldwork, loosen, and
LEAK. The MULTI-CLAMP SYSTEM'S exclusive ability
to clamp the line AT THE FITTING is widely used and
approved in thousands of plants worldwide. Now,
this exclusive advantage is available with Strut-Adapter.
The specially designed bushing (shown below), securely
accommodates the following Hydro-Craft junction
adapters: (see page 9 for dimensions)
FEMALE S.A.E. straight thread size:
3/4"-16.
FEMALE NPT pipe thread size:
3/8".

Strut-Adapter

MALE 37 Flared Junction Adapters:

1/4", 3/8", 1/2", 5/8".

Installation is a snap clamp, fitting, and cushion

are all packaged together
and clearly labeled

MALE O-RING FACE SEAL, Tube Junction Adapters:

3/8", 1/2", 5/8", 3/4".
Clamp available in plated steel and stainless steel.

How To Order
Select by part number.
WS-BFM-10-6P
Example:
This example would provide you with our female NPT junction
adapter with a 3/8" fitting size. Add SS to end of part number for
stainless steel clamp.
FITTING SIZE

PART NO.

FEMALE NPT JUNCTION ADAPTERS, HC-10 & HC-16 SERIES

3/8" FEMALE NPT
WS-BFM-10-6P
3/8

2.07

2.60

FEMALE SAE JUNCTION ADAPTERS, HC-10 & HC-16 SERIES

3/4"-16 FEMALE SAE
WS-BSAE-10-8
3/4

2.07

2.60

MALE 37 FLARED JUNCTION ADAPTERS, HC-10 SERIES

1/4" MALE 37 FLARE
WS-B-10-4
3/8" MALE 37 FLARE
WS-B-10-6
1/2" MALE 37 FLARE
WS-B-10-8
5/8" MALE 37 FLARE
WS-B-10-10

2.07
2.07
2.07
2.07

2.60
2.60
2.60
2.60

2.07
2.07
2.07
2.07

2.60
2.60
2.60
2.60

1/4
3/8
1/2
5/8

MALE O-RING FACE SEAL, TUBE JUNCTION ADAPTERS, HC-10 SERIES

3/8" MALE
WS-FB-10-6
3/8
1/2" MALE
WS-FB-10-8
1/2
5/8" MALE
WS-FB-10-10
5/8
3/4" MALE
WS-FB-10-12
3/4

1.250
B

1.625

All dimensions are approximate in inches

HYDRO-CRAFT FOR ORDERS CALL 702-566-8798 (WEST COAST) OR 248-652-8100 (EAST COAST)

15

Index

The WALKER-STRUT CLAMPING SYSTEM is ideal for

line runs through 6" where space is at a premium,
or where severe shock and vibration is not present.
Used now for several years in the fluid power
industry, it has been proven time and again as the
most sensible, most economical, most trouble-free
rail-mounted clamp available. The Walker-Strut is
also widely used in the refrigeration and mobile
industries.
The WALKER-STRUT Clamp
Clamps are available in plated steel and stainless steel.
The Bushing
Manufactured from a thermoplastic elastomer,
it's built tough to withstand the effects of most oils,
chemicals and industrial cleaning compounds, in
temperatures from 20oF to 275oF.

Walker-Strut
The Channel Mounted
Clamp from Hydro-Craft
Reduces:

VIBRATION
SHOCK
SURGE
EXPANSION AND
CONTRACTION

Installation
One man, one tool time savings. Retrofits can be
added without disassembling your present system.
Despite its exclusive benefits, the Walker-Strut System
from Hydro-Craft is priced competitively. Installation is
a snap: simply mount the base channel, position the
clamp, and tighten!
WALKER-STRUT assemblies are available 5 sets per
bag. Larger quantities can be shipped in bulk.

Hydro-Craft WALKER-STRUT Channel

Channel is used to mount Strut-Adapter, Hydro-Strut,
Silent-Strut, and Walker-Strut Clamps.
Steel SingleAnchor Channel, 14 ga. x 13/16 x 1-5/8" with green
baked-on finish. Also available in 304 stainless steel.
Available in precut lengths: 3', 4', and 10'. Special cut
sizes available, please call for quote.
PLEASE NOTE: Long channel shipped with a combined length and girth of
120" or more must ship by common carrier. Cut-to-size orders may therefore cost less due to shipping via U.P. S.

16

HYDRO-CRAFT FOR ORDERS CALL 702-566-8798 (WEST COAST) OR 248-652-8100 (EAST COAST)

Index

Walker-Strut

How To Order
Simply choose the clamp size, select no symbol for
plated steel or SS for stainless steel, and the appropriate
bushing size.
Example: WS-06-P - SS
This example would provide you with a stainless steel
clamp, and a cushion for a 3/8 pipe.

CLAMP
NO.

TUBE SIZE
A
A-1
COPPER
COPPER INCHES (mm)
& STEEL
WATER
TUBING PIPE(NOM)

WS-04
WS-06
WS-08
WS-10
WS-12
WS-14
WS-16
WS-18
WS-20
WS-22
WS-24
WS-26
WS-28
WS-30
WS-32
WS-34
WS-36
WS-38
WS-40
WS-42
WS-46
WS-48
WS-50
WS-56
WS-58
WS-64
WS-66
WS-72

1/4
3/8
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
2-5/8
2-7/8
3
3-1/8
3-1/2
3-5/8
4
4-1/8
4-1/2

1/4
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2

.25
.37
.50
.62
.75
.87
1
1.12
1.25
1.37
1.50
1.62
1.75
1.87
2
2.12
2.25
2.37
2.50
2.62
2.87
3
3.12
3.50
3.82
4
4.12
4.50

6.4
9.4
12.7
15.8
19.1
22.1
25.4
28.5
31.8
34.8
38.1
41.2
44.5
47.5
50.8
53.9
57.2
60.2
63.5
66.6
72.9
76.2
79.3
88.9
97.0
101.6
104.7
114.3

.62
.82
.94
1.06
1.20
1.31
1.44
1.57
1.70
1.82
1.95
2.07
2.20
2.32
2.45
2.57
2.69
2.82
2.94
3.07
3.32
3.44
3.57
3.95
4.20
4.45
4.57
4.95

.27
.33
.40
.46
.52
.58
.65
.70
.77
.83
.90
.96
1.02
1.09
1.15
1.27
1.34
1.41
1.46
1.53
1.66
1.72
1.78
1.97
2.03
2.28
2.34
2.53

1.11
1.24
1.36
1.50
1.78
1.91
2.03
2.16
2.30
2.75
2.75
3.03
3.03
3.28
3.28
3.53
3.65
3.78
4.03
4.03
4.27
4.52
4.52
4.91
5.03
5.53
5.66
6.03

D
A
C

WS-04 through WS-58 packed 5 units per bag. WS-64 through WS-72 packed 1 per bag.
CLAMP NO.

PIPE
SIZE

A
INCHES

A-1
(mm)

1.25
B

WS-04P
WS-06P
WS-08P
WS-12P
WS-16P
WS-20P
WS-24P
WS-32P
WS-40P
WS-48P
WS-56P
WS-64P
WS-80P
WS-96P

1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6

.54
.67
.84
1.05
1.31
1.66
1.90
2.37
2.87
3.50
4
4.50
5.58
6.62

13.7
17.0
21.3
26.7
33.3
42.2
48.3
60.2
72.9
88.9
101.6
114.3
141.7
168.2

.98
1.13
1.29
1.50
1.76
2.17
2.35
2.82
3.32
3.95
4.45
4.95
6.01
7.07

.43
.49
.58
.70
.81
.99
1.09
1.41
1.66
1.97
2.28
2.53
3.06
3.59

1.62

1.41
1.59
1.91
2.16
2.75
3.03
3.28
3.78
4.27
4.91
5.53
6.03
7.03
8.03

HYDRO-CRAFT FOR ORDERS CALL 702-566-8798 (WEST COAST) OR 248-652-8100 (EAST COAST)

17

Index

The Silent-Strut clamping system is excellent for use in

refrigeration, HVAC and electrical applications, but is
also effective on hydraulic, pneumatic and fuel line
applications. In addition to its low cost, it offers
excellent noise reduction due to the materials of
construction and design of the channel mounting
system. This channel mounting makes for a quick and
easy installation. The superior design will maintain
equal centers, even when the line size varies.
Lines remain rigid and have a neat appearance.
The clamp is made from Zytel (glass-filled nylon) that
is very resistant to corrosion, and much lower in cost
than stainless steel. Two clamp sizes are available. All
the bushings are made from Styrene Butadiene Rubber
(SBR). The bushing is secured in the clamp using
stainless steel nuts and bolts. The SBR bushing is
compression molded, selected for its compatibility with
most oils, chemicals, and cleaning compounds, and
provides the cushion for the noise reduction.

Silent-Strut
Clamping System

Available standard sizes for tube and pipe range from

1/4-inch through 2-inch. Please contact the factory
for more information.

EXCLUSIVE TO HYDRO-CRAFT

How To Order

Easy channel mounting

installation
Wide range of line sizes from
1/4" to 2"
High-quality materials of
construction
Greatly reduces line noise

D
C
B

1.250
A

1.625

All dimensions are approximate in inches

18

Simply choose the clamp size and the appropriate bushing size.
Clamps and bushings are ordered separately.
Example: Clamp HC-SS-16 and Bushing G-16-10
This example would provide you with our smaller Zytel glassfilled nylon clamp and a bushing for 5/8" tube.

CLAMP NO.

CLAMP NO.

HC-SS-16

1.50

1.25

3 3/8

HC-SS-32

2.82

1.87

4 5/8

Bushing
No.

TUBE
SIZE

G-16-4
G-16-5
G-16-6
G-16-8
G-16-10
G-16-12
G-16-14
G-16-16

1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
Pipe Size
1/4
3/8
1/2
3/4

G-16-4-P
G-16-6-P
G-16-8-P
G-16-12-P

D
D-1
INCHES (mm)
.234
.297
.359
.484
.609
.734
.859
.984

5.9
7.5
9.1
12.3
15.5
18.6
21.8
25.0

.516
.656
.813
1.031

13.1
16.7
20.7
26.2

Bushing
No,

TUBE
SIZE

G-32-4
G-32-6
G-32-8
G-32-10
G-32-12
G-32-14
G-32-16
G-32-20
G-32-24
G-32-28
G-32-32

1/4
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
Pipe Size
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2

G-32-4-P
G-32-6-P
G-32-8-P
G-32-12-P
G-32-16-P
G-32-20-P
G-32-24-P

D
D-1
INCHES (mm)
.234
.359
.484
.609
.734
.859
.984
1.234
1.484
1.734
1.984

5.9
9.1
12.3
15.5
18.6
21.8
25.0
31.3
37.7
44.0
50.4

.516
.656
.813
1.031
1.297
1.641
1.875

13.1
16.7
20.7
26.2
32.9
41.7
47.6

HYDRO-CRAFT FOR ORDERS CALL 702-566-8798 (WEST COAST) OR 248-652-8100 (EAST COAST)

Index

Tube (Inches)
(OD)

Pipe (Inches)
(Nominal Bore)

Metric
(OD)

1/4 to 3-1/2

Standard Series
1/8 to 2

6 to 102

1/4 to 8

Heavy Series
1/8 to 8

6 to 324

1/4 to 1-1/2

Twin Series
1/4 to 1-1/4

6 to 42

DIN Rails - Order Separately

28 x 14 x 2 Meters
= D-RAIL-S
40 x 22 x 2 Meters
= D-RAIL-H
How to Order

Build an ordering code as follows:

Example:
A-H-P-24P-OC-HS-SS
Hydro-Clamp
Clamp Series
Heavy
Standard
Twin
Standard with one
mounting hole
Insert Material

=A
=H
=S
=T
=O

Polypropylene
=P
Polyamide*
= PM
Aluminum*
=A
None
=X
Size (Specify size, then type)
Tube
= No Symbol
Pipe
=P
Metric
=M
Mounting Hardware
Weld Plate
=W
DIN Rail Nut
=R
Top Cover Plate Only
= OC
Weld with Top Cover Plate
= WC
No Mounting Hardware
=X
Hardware Components (Metric)
Hex Bolt
=H
Hex Bolt with Spacers
= HS
Stacking Bolts
=S
Stacking Bolts with Lock Plate = SL
Allen Bolts
=A
Locking Plate Only
=L
Spacer Only
= SP
No Hardware Components = X
Stainless Steel Clamp
Stainless Steel Clamp*
= SS
None
= No Symbol

D
UE

TIN

O
ISC

Hydro-Clamp System
Routes Line Runs Simply
and Inexpensively
Easy to use, modular
clamping system
Interchangeable with
other major brands
Wide range of sizes, from
1/4 through 8
Available in standard, heavy,
and twin configurations, in
polypropylene, aluminum*,
and polyamide*
Optional stainless steel
clamp available
For use with tube, pipe,
and metric sizes
Meets DIN SPEC 3015
DIN rails are available to
complete your system

Insert
DIN Rail

Weld Plate
DIN Rail Nut
Stacking Bolt
Top Cover Plate

*Special order
HYDRO-CRAFT FOR ORDERS CALL 702-566-8798 (WEST COAST) OR 248-652-8100 (EAST COAST)

19

Index

Inexpensive Cushions To Fit Standard Pipe Straps

The Econo-Isolator not only meets the requirements for
plumbing, mechanical, and HVAC/R applications, but
performs well in hydraulic, pneumatic, fuel line, and
electrical applications.
The Econo-Isolator, using standard pipe straps that are
readily available, retains, guides, protects and spaces line
runs uniformly. Lines are rigid, have a neat appearance,
and install easily. The bushing is made from Styrene
Butadiene Rubber. It is compression molded and selected
for its excellent compatibility with industrial solvents, fuels,
hydraulic fluids, other liquids and gases.
How To Order

Econo-Isolator
Clamping System
The Econo-Isolator clamping
system offers a low-cost, highquality solution for use in
plumbing, mechanical, and
HVAC/R applications.
Easy mounting using readilyavailable brackets
Made from high-quality Styrene
Butadiene Rubber (SBR)

1-Hole Straps

2-Hole Straps

B
A

All dimensions are approximate in inches

20

Simply choose the bushing number and appropriate strap

number that corresponds to the tube or pipe size you need.
Bushings and pipe straps are ordered separately.
Example: Bushing EI-10-12 and Strap EIM-10
This would provide you with the bushing and strap to fit a 3/4" tube.
Bushing
No.

Tube
Size

EI-10-4
EI-10-6
EI-10-8
EI-10-10
EI-10-12

1/4
3/8
1/2
5/8
3/4

.870

.835

1.0

EI-10-4P
EI-10-6P

Pipe Size
1/4
3/8

EI-16-14
EI-16-16

Tube Size
7/8
1.30
1

EI-16-8P
EI-16-12P

Pipe Size
1/2
3/4

1.24

1.0

Bushing
No.

Tube
Size

EI-32-18
EI-32-20
EI-32-22
EI-32-24
EI-32-26
EI-32-28
EI-32-30
EI-32-32
EI-32-34

1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8

2.38

2.37

1.50

EI-32-16P
EI-32-20P
EI-32-24P

Pipe Size
1
1-1/4
1-1/2

D
D-1
(Inches) (mm)
.235
.360
.485
.610
.735

5.9
9.1
12.3
15.5
19.6

.525
.660

13.3
16.7

.860
.985

21.8
25.6

.825
1.035

21.0
26.2

D
D-1
(Inches) (mm)
1.110
1.235
1.360
1.485
1.610
1.735
1.860
1.985
2.110

28.2
31.3
34.5
37.7
40.9
44.0
47.2
50.4
53.6

1.300
1.645
1.885

33.0
41.8
47.8

1 Hole Strap
No.

Size
(Inches)

EIM-10-1
EIM-16-1
EIM-32-1

1/2"
1"
2"

1.85
2.7
4.7

0.9
1.4
2.325

2 Hole Strap
No.

Size
(Inches)

EIM-10
EIM-16
EIM-32

1/2"
1"
2"

2.438
3.375
4.7

0.81
1.285
2.325

* Add -SS to strap part numbers for stainless steel straps.

HYDRO-CRAFT FOR ORDERS CALL 702-566-8798 (WEST COAST) OR 248-652-8100 (EAST COAST)

Front Cover

HYDRO-CRAFT
CATALOG

42

Line
Clamping
Systems

Inside Front Cover

Check Out Our Products & Accessories Catalog

Back Cover

HYDRO-CRAFT INC.
Hydro-Craft was established in 1958 in
a small shop in Detroit, Michigan as a
manufacturer of quality hydraulic tanks.
Over the years we have expanded our
product line and our facilities. We currently
have two state-of- the art plants located in
Rochester Hills, Michigan and Henderson,
Nevada. From these two points, we can
ship our product conveniently to any
location worldwide.
In addition to our line clamp systems,
the Hydro-Craft product line includes
stock and custom hydraulic reservoirs,
filler breather caps, sight level gages,
flange kits, shock mounts, pump/motor
mounts, manifolds, and many more
hydraulic accessories.
The dedication to providing our customers
with quality parts and service has only
grown stronger over the years. We thank
you for your interest in our products.

320 Sunpac Ct.

Henderson, Nevada 89011
Tel (702) 566-8798
Fax (702) 566-9285
1821 Rochester Industrial Drive,
Rochester Hills, Michigan 48309
Tel (248) 652-8100
Fax (248) 652-0343
WWW: http://www.hydro-craft.com
E-mail: [email protected]

MasterCard