G Ul F G Rill

ES C O.

LINEAR SLOT
DIFFUSERS

LINEAR SLOT SUPPLY AIR DIFFUSER

LINEAR SLOT DIFFUSER WITH DEFLECTION BLADES
AND VOLUME CONTROL DAMPER .

... ------

-------t

--------c

--

--------

PRODUCT DESCRIPTION
The linear slot diffuser with deflection blades and
control
damper
is constructed
of extruded
aluminium alloy and are polyester powder coated
finish.

The volume control damper consists of two strips of

extruded aluminium, one fixed and one movable.
They both have 5/8" x 7/8" rectangular holes on
1-3/4" center, for 3/4" and 1" slot opening.

The fully adjustable deflection blades allow for the air

pattern to be controlled along the ceiling, straight
down or at some intermediate setting.

By offsetting the holes the air flow rate can be reduced.

Damper works also as equalizing grid.

The deflecting blades are designed so that when in

the closed position, the air pressure tends to
form a tight seal.

Maximum length supplied - 10 feet.

Standard finish is white calor for slot diffuser and
deflection blades. Damper in black calor. Painted
under electrostatic polyester powder coated system.
Other colors available on request. The polyester
powder of highest quality are used to enhance the
appearance of the units.

The slots are available in 3/4" or 1" width.

The air flow rate can be varied without changing the
air pattern by the use of the volume control damper
attached to the rear side of the diffuser.

Listed Sizes
3/4" Slot Width
No. of

1.65
1.42

2.99

4.33

B (in.)

2.76

4.09

5.67
5.43

C (in.)

3.31

4.61

5.94

7.28

CFM/FT

10-100

20-125

30-150

Slots
A (in.)

7.01

8.35
8.15

9.65
9.41

10.94

6.81
8.58

9.96

11.38

12.64

40-200

50-250

60-300

70-350

80-400

10.71

1" Slot Width

No. of
Slots

A (in.)

1.94

3.58

5.23

6.88

8.52

10.17

11.81

13.46

B (in.)

3.35

6.64
8.42

9.93

11.58

13.22

5.13

4.99
6.77

8.28

C (in.)

1.70
3.48

10.06

11.71

13.36

15.00

CFM/FT

10-100

20-125

30-150

40-200

50-250

60-300

70-350

80-400

7-1

LS3-A

LINEAR SLOT RETURN AIR DIFFUSER

LINEAR SLOT DIFFUSER WITH DEFLECTION BLADES
AND WITHOUT VOLUME CONTROL DAMPER.

-I

I'"

-I

PRODUCT DESCRIPTION
The linear slot diffuser with deflection blades is
constructed of extruded aluminium alloy and are
polyester powder coated finish.

The slots are available in 3/4" or 1" width.

Maximum length supplied - 10 feet.

The fully adjustable deflection blades allow for the air

p.attern to be controlled along the ceiling, straight
down or at some intermediate setting.

Standard finish is white calor for slot diffuser and

deflection blades.
Painted under electrostatic
polyester powder coated system.
Other
colors
available on request. The polyester powder of highest
quality are used to enhance the appearance of the
units.

The deflecting blades are designed so that when in

the closed position, the air pressure tends to form a
tight seal.

Listed Sizes
3/4" Slot Width
No. of

B (in.)

1.65
1.42

2.99

4.33

8.35

6.81

8.15

9.65
9.41

10.94

4.09

5.67
5.43

7.01

2.76

C (in.)

3.31

4.61

5.94

7.28

8.58

11.38

12.64

10-100

20-125

30-150

40-200

50-250

9.96
60-300

70-350

80-400

A (in.)

1.94

3.58

5.23

6.88

8.52

10.17

11.81

13.46

B (in.)

1.70

3.35

4.99

8.28

9.93

11.58

13.22

C(in.)

3.48

6.77

10.06

11.71

13.36

15.00

CFM/ft.

10-100

5.13
20-125

6.64
8.42

30-150

40-200

50-250

60-300

70-350

80400

Slots
A (in.)

CFM/ft.

10.71

1" Slot Width

No. of
Slots

7-2

-0

LINEAR SLOT RETURN AIR DIFFUSER

LINEAR SLOT DIFFUSER WITHOUT DEFLECTION BLADES
AND WITH VOLUME CONTROL DAMPER.

~------

2-3/8"

A -------.1

I"J-----;-I~---:__--____I'

[:1-1/4,,-1

-----1J

PRODUCT DESCRIPTION
The linear slot diffuser with volume control damper
and no deflection blades is constructed of extruded
aluminium alloy and are polyester powder coated
finish.

They both have a series of 5/8" x 7/8" rectangular holes

on 1-3/4" center, for 3/4" and 1" slot opening.
By offsetting the holes the airflow rate can be reduced.

The air flow rate can be varied by the use of the volume
control damper attached to the rear side of the diffuser.

Maximum length supplied - 10 feet.

Standard finish is white color for slot diffuser. Damper
in black calor. Painted under electrostatic polyester
powder coated system. Other colors available on
request. The polyester powder of highest quality are
used to enhance the appearance of the units.

The volume control damper consists of two strips of

extruded aluminium, one fixed and one movable.

Listed Sizes
3/4" Slot Width
No. of
Slots
A (in.)
B (in.)
C (in.)
CFM/FT.

1.65
1.42

2.99

4.33

5.67

2.76

4.09

5.43

7.01

8.35
8.15

9.65
9.41

10.94

6.81

3.31

4.61

5.94

7.28

8.58

9.96

11.38

12.64

10-100

20-125

30-150

40-200

50-250

60-300

70-350

80-400

10.71

1" Slot Width

No. of

A (in.)

1.94

3.58

5.23

6.88

8.52

10.17

11.81

13.46

B (in.)

1.70

3.35

4.99

8.28

9.93

11.58

13.22

C(in)

3.48

5.13

6.77

6.64
8.42

10.06

11.71

13.36

CFM/FT.

10-100

20-125

30-150

40-200

50-250

60-300

70-350

15.00
80-400

Slots

7-3

END CAP ARRANGEMENTS

SLOT DIFFUSER WITHOUT END CAP

I.. -----

L = NOMINAL

SIZE ------.

SLOT DIFFUSER WITH ONE END CAP: RIGHT OR

LEFT

1+-----

= NOMINAL

SIZE

---------+

END CAP BOTH ENDS

11

11

11

11

11

11

11

11

END CAP LEFT

-11

WITHOUT END CAP

-11

END CAP RIGHT

-I

7-4

- ear Slot Supply Diffuser Featuring Fully Adjustable Deflection

a es. The Deflection Blades Provide Combination Air-Pattern, Flow
ate Control and Blank-Off.

Si gle Slot Adjustments

Horizontal Right

Horizontal Left

Fully Vertical

Fully Closed

Multiple Slot Adjustments, Up to 8 Slots Wide

One - Way

Opposed

IMPORTANT

Imbalance

Two - Way

Vertical and Horizontal

NOTE:

In all air-slot type diffusers, constriction of free area by blade

relationships must be set carefully so as not to throttle airstream,
with resultant increase in static pressure and noise level criteria.
It is recommended that care be exercised in setting blades to
prevent such excessive constriction of air passageway.
2-Way throw may be obtained by staggering each length
of deflection blades alternately from right to left.

7-5

MITERED CORNERS

SIDE WALL -INSIDE

CORNER

SIDE WALL - OUTSIDE CORNER

...-----

!.--

11-13/16"

11-13/16" -----+I

--..!

CEILING CORNER PIECES (Available in one through eight slots)

7-6

LINEAR SLOT AIR

ENGINEERING

Blade Settings T e deflection blades

of the supply

slot linear

diffuser can be adjusted to give either a horizontal

or vertical air pattern.
The horizontal air flow
adjustment may be set for either left or right hand
throw.

DIFFUSERS
DATA

Sound DataSound data (NC values) shown in the Performance

Tables are based on a room absorption of 10dB,
re 10-12 Watts and a 4-feet unit test length.
To
determine NC values for other lengths, add NC value
to catalog data as follows:

Diffuser Active Length (ft.)

Add NC Value (dB)

"
I

" -""

_/

'.... ..

I
I
I
\

,'

\
\
\

----

I
,

," ... _-_

I
I
/

/'

Changing the blade setting also changes the

noise and total pressure.
Throw DataAll throw data is based on the results of tests of
4-feet length diffusers.
To determine throws for
other diffuser lengths, use correction factors as
follows:

Diffuser Active Length(ft.

Throw Correction Factor

0.6

6-8

0.8

0.9

1.0

1.3

2
-3.0

-1.5

6-8

1.0 2.0

Selection Procedure
The horizontal throw data is presented in the
performance data pages with all slots supplying air
in a given direction. To determine two-way throw,
use the catalog throw data for the desired quantity
of air from the number of slots in each direction
and reduce the throw by twenty percent.
Example
Determine the throw for an LS3-AD (3/4" Slot Width)
2 ft. long, 3-slot diffuser with 250 CFM in one
direction and 120 CFM in the other.
A. 250 CFM, 2', 2-slots = 125 CFM/ft
Catalog throws = 31 - 37
Throws x 0.80 = 25 - 30
B. 120 CFM, 2', t-slot = 60-CFM/ft
Catalog throws = 22 - 26
Throw x 0.80 = 18 - 21

Area Factor Summary

Slot
Width

3/4"

1"

Number of
Slots
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8

Horizontal

Vertical

Return

0.073
0.135
0.201
0.265
0.330
0.395
0.455

0.121
0.180
0.237
0.295
0.355
0.413
0.470

0.123
0.184
0.242
0.301
0.362
0.421
0.479

0.520
0.088
0.162
0.241
0.318
0.396
0.474

0.530
0.184
0.274
0.360
0.448
0.540
0.628
0.714
0.806

0.539
0.188
0.281
0.367
0.457

0.546
0.631

0.551
0.641
0.732
0.822

7-7

SUPPLY LINEAR SLOT AIR DIFFUSERS

PERFORMANCE DATA

Model : LS3 - AD
Linear Diffuser 3/4" Slot Width
No. 01
Slots

CFM/FT.

30

90

100

125

.200

.356

.557

.802

1.092

1.426

. 1.804

2.228

15-19

18-21

20-24

22-26

23-28

25-30

27-32

28-33

NC

<20

<20

30

39

41

47

>50

>50

>50

>50

VERT. SP

.010

.039

.088

.157

.245

.353

.480

.627

.794

.. 980

2-5

9-15

16-23

22-27

25-30

27-32

29-35

31-37

33-39

35-42

<20

<20

<20

20

27

33

38

42

46

49

HOR. SP

.022

.050

.089

.139

.200

.273

.356

.451

.557

.870

THROW

9-13

14-19

18-21

20-24

22-26

23-28

25-30

27-32

28-33

31-37

150

NC

<20

<20

<20

28

33

38

42

46

>50

>50

VERT. SP

.010

.022

.039

.061

.088

.120

.157

.199

.245

.383

THROW

3-6

7-13

12-21

19-26

23-31

27-35

30-37

33-39

35-42

39-46

NC

<20

<20

<20

<20

<20

<20

23

27

30

37

HOR. SP

.022

.040

.062

.089

.121

.158

.200

.248

.387

.557

THROW

11-16

15-21

19-24

23-26

23-28

25-30

27-32

28-33

31-37

34-41

200

NC

<20

<20

<20

22

27

31

35

38

46

50

VERT. SP

.010

.017

.027

.039

.053

.070

.088

.109

.170

.245

THROW

4-8

7-13

10-20

15-26

20-30

25-34

28-38

31-42

39-46

43-51

NC

<20

<20

<20

<20

<20

<20

<20

<20

26

32

.022

.035

.050

.068

.089

.113

.139

.218

.313

.557

13-18

16-23

20-27

23-28

26-30

27-32

28-33

31-37

34-41

40-47

250

NC

<20

<20

<20

<20

24

27

31

38

43

>50

VERT. SP

.010

.015

.022

.030

.039

.050

.061

.096

.138

.245

4-9

7-13

10-18

13-25

17-30

22-33

27-36

34-46

40-51

50-58

<20

<20

<20

<20

<20

<20

<20

<20

24

33

.022

.032

.044

.057

.072

.089

.139

.200

.356

.557

15-20

18-24

20-28

23-30

26-32

29-33

31-37

34-41

40-46

44-52

HOR. SP
THROW

300

NC

<20

<20

<20

<20

21

24

32

37

46

>50

VERT. SP

.010

.014

.019

.025

.032

.039

.061

.088

.157

.245

THROW

5-10

7-13

9-18

12-23

16-29

19-33

30-41

36-49

48-58

56-65

<20

<20

<20

<20

<20

<20

<20

<20

27

34

.022

.030

.040

.050

.062

.097

.139

.248

.387

.557

16-22

19-26

21-29

24-33

27-35

31-37

34-41

40-47

44-52

48-57

NC
HOR. SP
THROW

350

NC

<20

<20

<20

<20

<20

27

32

41

49

>50

VERT. SP

.010

.013

.017

.022

.027

.043

.061

.109

.170

.245

THROW

5-10

7-14

9-18

12-22

15-27

23-38

33-45

44-58

55-65

61-71

NC

<20

<20

<20

<20

<20

<20

<20

22

29

35

HOR. SP

.022

.029

.037

.045

.071

.102

.182

.284

.409

.557

THROW

17-24

20-27

22-31

25-34

31"-37

34-41

40-47

44-52

48-56

52-61

400

NC

<20

<20

<20

<20

22

28

37

44

50

>50

VERT. SP

.010

.013

.016

.020

.031

.045

.080

.125

.180

.245

THROW

6-11

7-14

9-18

12-22

18-33

26-42

41-55

51-65

61-70

66-77

NC

<20

<20

<20

<20

<20

<20

<20

25

31

37

.022

.028

.035

.054

.078

.139

.218

.313

.426

.557

18-26

21-29

23-32

29-37

35-41

40-47

44-52

48-56

52-61

56-66

HOR. SP
THROW

80

.089

NC

70

13-15

THROW

60

.022

THROW

50

7-10

HOR. SP

40

HOR.SP

NC

20

THROW

THROW

10

NC

<20

<20

<20

<20

24

34

41

46

50

>50

VERT. SP

.010

.012

.015

.024

.034

.061

.096

.138

.188

.245

THROW

6-12

8-15

10-18

15-28

22-39

38-52

48-64

57-70

66-77

70-82

<20

<20

<20

<20

<20

<20

21

27

32

36

NC

Ne Data based on 1OdB room attenuation.

Throw Data based on isothermal air at 100 and 50 fpm terminal velocity.
Horizontal Throw is 1 way pattern.
Static Pressure (SP) in inches w.g.

7-8

SUPPLY LINEAR SLOT AIR DIFFUSERS

PERFORMANCE DATA

Model: LS3 - AD
Linear Diffuser 1" Slot Width
No. cl
SIols

CFM/FT.

10

HOR. SP

.010

.040

.090

.160

.250

.360

.490

.640

.810

1.000

THROW

4-8

10-15

15-19

18-21

2024

2226

23-28

2530

27-32

28-33

80

90

100

125

<20

25

34

41

47

>50

>50

>50

>50

.066

.117

.183

.263

.358

.468

.592

.731

2-4

815

16-22

21-27

2529

2732

2935

3137

33-39

3542

<20

<20

<20

<20

21

27

32

36

40

43

HOR. SP

.010

.023

.040

.063

.090

.122

.160

.203

.250

.391

THROW

6-11

1115

1420

1824

22-26

2328

2530

2732

2833

3137

150

NC

<20

<20

<20

22

28

33

37

41

44

50

VERT. SP

.007

.016

.029

.046

.066

.089

.117

.148

.183

.285

THROW

3-6

612

1121

1725

22-30

26-35

29-37

33-39

35-42

3946

NC

<20

<20

<20

<20

<20

<20

<20

21

24

31

HOR. SP

.010

.018

.028

.040

.054

.071

.090

.111

.174

.250

THROW

713

12-17

15-21

1824

2128

23-30

26-32

2833

3137

34-41

200

Ne

<20

<20

<20

<20

22

26

30

33

40

46

VERT. SP

.007

.013

.020

.029

.040

.052

.066

.081

.127

.183

THROW

37

612

918

13-24

1829

2433

27-37

30-41

3746

4351

Ne

<20

<20

<20

<20

<20

<20

<20

<20

<20

26

HOR.SP

010

.016

.023

.031

.040

.051

.063

.098

.141

.250

THROW

8-15

1318

1521

1825

2028

2332

2533

3237

3441

40-47

250

Ne

<20

<20

<20

<20

<20

22

25

32

38

47

VERT. SP

.007

.011

.016

.022

.029

.037

.046

.071

.103

.183

4-8

6-12

9-17

12-22

16-29

20-32

24-36

32-44

39-51

50-58

<20

<20

<20

<20

<20

<20

<20

<20

<20

27

HOR. SP

.010

.014

.020

.026

.032

.040

.063

.090

.160

.250

TH,ROW

9-16

13-19

1622

18-25

20-28

23-31

2837

34-41

40-47

44-51

300

Ne

<20

<20

<20

<20

<20

<20

26

32

41

48

VERT. SP

.007

.011

.014

.019

.024

.029

.046

.066

.117

.183

4-9

6-12

916

1121

14-26

17-32

27-40

3547

46-58

5665

<20

<20

<20

<20

<20

<20

<20

<20

21

28

.010

.014

.018

.023

.028

.043

.063

.111

.174

.250

10-18

14-20

1723

19-26

21-29

29-36

31-41

40-47

44-52

48-57

Ne
HOR. SP
THROW

350

NC

<20

<20

<20

<20

<20

21

27

36

43

49

VERT. SP

.007

.010

.013

.016

.020

.032

.046

.081

.127

.183

THROW

59

6-13

816

1120

1325

21-36

20-43

4258

53-65

61-71

Ne

<20

<20

<20

<20

<20

<20

<20

<20

23

29

.Q10

.013

.017

.020

.032

.046

.082

.128

.184

.250

1119

1422

1724

19-27

2433

29-39

38-47

44-52

48-57

52-61

HOR. SP
THROW

70

.029

THROW

60

<20

Ne

50

.007

THROW

40

NC

NC

30

VERT. SP
THROW

20

400

Ne

<20

<20

<20

<20

<20

23

32

39

45

50

VERT.SP

.007

.010

.012

.015

.023

.034

.060

.093

.134

.183

THROW

510

7-13

9-16

11-20

1630

2440

39-53

4965

5971

6677

Ne

<20

<20

<20

<20

<20

<20

<20

<20

25

30

HOR. SP

.010

.013

.016

.024

.035

.063

.098

.141

.191

.250

THROW

1220

1523

1825

22-31

27-37

3647

45-52

48-57

52-61

56-66

NC

<20

<20

<20

<20

<20

28

35

41

46

50

VERT. SP

.007

.009

.011

.018

.026

.046

.071

.103

.140

.183

THROW

6-11

713

916

13-25

19-35

3450

4662

5571

64-77

70-82

<20

<20

<20

<20

<20

<20

<20

21

26

30

NC

Ne Data based on 1OdS room attenuation.

Throw Data based on isothermal air at 100 and 50 fpm terminal velocity.
Horizontal Throw is 1 way pattern.
Static Pressure (SP) in inches w.g.

7-9

RETURN LINEAR SLOT AIR DIFFUSERS

PERFORMANCE DATA

Model : LS3 - A
Linear slot diffuser with deflection blades and without volume control damper (3/4" Slot Width).
o. of

Negative SP

.005

.022

.048

.086

.133

.196

.270

.354

Slots

CFM/Foot
NC

CFM/Foot
NC
CFM/Foot

3
4

NC
CFM/Foot
NC

CFM/Foot
NC
CFM/Foot

NC
CFM/Foot

10

20

30

40

50

60

70

80

<20

<20

<20

<20

25

31

36

40

20

40

60

80

100

120

140

160

<20

<20

<20

23

27

33

38

42

30

60

90

120

150

180

210

240

<20

<20

23

29

33

39

44

46

40

80

120

160

200

240

280

320

<20

<20

26

32

36

42

47

50

50

100

150

200

250

300

350

400

<20

<20

28

34

38

44

49

>50

60

120

180

240

300

360

420

480

<20

23

31

36

40

46

>50

>50

70

140

210

280

350

420

490

560

<20

23

31

37

42

48

>50

>50

80

160

240

320

400

480

560

640

38

44

>50

>50

>50

7
NC
CFM/Foot

NC

<20

24

32

Model : LS3 - 0
Linear slot diffuser without deflection blades and with volume control damper (3/4" Slot Width).
No. of

Negative SP

.015

.062

.134

.241

.372

.549

.756

.991

10

20

30

40

50

60

70

80

<20

<20

<20

22

27

32

37

42

20

40

60

80

100

120

140

160

<20

<20

24

32

38

43

48

>50

30

60

90

120

150

180

210

240

<20

<20

30

38

42

49

>50

>50

40

80

120

160

'200

240

280

320

Slots

CFM/Foot
NC

CFM/Foot
NC
CFM/Foot

3
4

NC
CFM/Foot
NC
CFM/Foot

NC
CFM/Foot

NC
CFM/Foot

<20

23

34

43

48

>50

>50

>50

50

100

150

200

250

300

350

400

<20

26

38

46

>50

>50

>50

>50

60

120

180

240

300

360

420

480

<20

29

40

48

>50

>50

>50

>50

70

140

210

280

350

420

490

560

7
NC
CFM/Foot

NC

<20

31

43

>50

>50

>50

>50

>50

80

160

240

320

400

480

560

640

<20

33

45

>50

>50

>50

>50

>50

NC Data based on 1OdB room attenuation.

Static Pressure (SP) in inches w.g.

7-10

RETURN LINEAR SLOT AIR DIFFUSERS

PERFORMANCE DATA

Model : LS3 - A
Linear slot diffuser with deflection
o. of

Negative SP

blades and without volume control damper (1" Slot Width).

.016

.034

.055

.086

.123

.161

.205

.354

20

30

40

50

60

70

80

100

<20

<20

<20

<20

24

27

30

35

40

60

80

100

120

140

160

200

<20

<20

<20

22

26

29

33

37

60

90

120

150

180

210

240

300

<20

<20

<20

24

28

31

34

39

80

120

160

200

240

280

320

400

Slots

CFM/Foot
NC

CFM/Foot
NC
CFM/Foot

NC
CFM/Foot

5
6
7

NC

<20

<20

<20

25

29

32

35

40

CFM/Foot

100

150

200

250

300

350

400

500

NC

<20

<20

21

26

30

33

36

41

CFM/Foot

120

180

240

300

360

420

480

600

NC

<20

<20

22

27

31

34

37

42

CFM/Foot

140

210

280

350

420

490

560

700

NC

<20

<20

23

28

32

35

38

43

CFM/Foot

160

240

320

400

480

560

640

800

NC

<20

<20

24

29

33

36

39

45

Model : LS3 - 0
Linear slot diffuser without deflection blades and with volume control damper (1" Slot Width).
No. of

Negative SP

.026

.095

.154

.240

.344

.451

.574

.991

20

30

40

50

60

70

80

100

<20

<20

<20

21

26

30

32

38

40

60

80

100

120

140

160

200

<20

<20

23

29

31

37

41

44

150

180

210

240

300

Slots

CFM/Foot
NC

CFM/Foot
NC
CFM/Foot

3
4

NC
CFM/Foot
NC

60

90

120

<20

<20

25

32

36

40

45

50

200

240

280

320

400

80

120

160

<20

22

26

34

39

43

48

>50

300

350

400

500

42

45

50

>50

480

600

CFM/Foot

100

150

200

250

NC

<20

24

29

36

CFM/Foot

120

180

240

300

360

420

NC

<20

26

32

39

45

49

>50

>519

CFM/Foot

140

210

280

350

420

490

560

700

NC

<20

29

36

43

48

>50

>50

>50
800
>50

CFM/Foot

160

240

320

400

480

560

640

NC

<20

31

40

46

>50

>50

>50

NC Data based on 1OdB room attenuation.

Static Pressure (SP) in inches w.g.

7-11

BALANCING OAT A

AIR FLOW
Supply Air Testing
Step 1 : Place an Alnor jet # 2220A as per sketch, and take velocity
readings at frequent intervals along one slot of a group of
slots having the same blade settings.
Take readings at approximately
intervals,

6" from end and at 1 foot

being careful to avoid readings

spacer bars which are at 18" intervals.

directly

below

Take atleast four

readings on units under 4 feet long.

Average the readings to obtain Average Velocity (Vk).
Fig. (1)
Step 2 : From table select the Ak for number of slots which have the
same blade settings.
AIR FLOW
Step 3 : Determine L as the length in feet of the section of slots having
the same settings.
Step 4 : Calculate CFM.
a. For Horizontal
Measure Vk on the side of slot as shown in Fig (1).
Take Ak from table.
Total CFM = Ak x Vk x L.
b. For Vertical
Fig. (2)
Measure Vk on one side of the slot as shown in Fig (2).
Take Ak from table.
Total CFM

AIR FLOW

Ak x Vk x L.

Return Air Testing

Measure Vk in the open side of the slot as shown in Fig (3).
Take Ak from table.
Total CFM = Ak x Vk x L.
Fig. (3)

7-12

INSTALLATION

DETAILS

Duct Width

0+1/16"
-0
B

I~
I~

1-5/8"

-l

.I

0+3/8"
Ceiling Opening
C

Ceiling Opening
No_ of

for 3/4" Slot Width

1

1.65
1.42

2.99

4.33

5.67

7.01

8.35

2.76

4.09

5.43

6.81

8.15

9.65
9.41

10.94

B (in.)

C (in.)

3.31

4.61

5.94

7.28

8.58

9.96

11.38

12.64

D (in.)

2.28

3.62

4.95

6.29

7.67

9.01

10.27

11.57

Slots
A (in.)

10.71

Ceiling Opening for 1" Slot Width

No. of
Slots

A (in.)

1.94

3.58

5.23

6.88

8.52

10.17

11.81

13.46

B (in.)

3.35

4.99

9.93

11.58

13.22

5.13

6.77

6.64
8.42

8.28

C (in.)

1.70
3.48

10.06

11.71

13.36

15.00

D (in.)

2.57

4.21

5.86

7.50

9.15

10.80

12.44

14.09

7-13

LINEAR SLOT DIFFUSERS

E GINEERING CALCULATION

R - Radius up to grille inside.

GRILLE'S SEGMENT
Grille Arch Length. (AIL).

= e x (11/180) x R
e -Angle, R - Radius

AIL

h = Segment Height.
R x (1 - COS (9/2.

L = Segment Length.
2 x R x (SIN (9/2.

1800

_mm--_m_.mmmmmmF==R--mm.m--.--m--~
Semi-Circular

Grille;

Arch Length = 11x R.

Full-Circular

Grille;

Arch Length

= 2 x 11x R.

NOTES:

All Curved Linear Slot Diffusers are ceiling mount.

The least radius of curvature is 1.5 meters.
Hit & miss damper for above diffusers will not be provided.
Full function of deflector (pattern controllers) may not be obtained
in above diffusers.

7-14