Scribd
Upload
130 views

Smile Design With Composites: A Case Study: Clinical

This document describes a clinical case study where direct composite veneers were used to address a patient's esthetic concerns. A digital smile design was used to analyze the patient's smile and identify asymmetries in tooth proportions and gingival display. Direct composite veneers using IPS Empress Direct composite were placed on teeth #21-22 to improve their color and shape based on the digital smile design analysis. Crown lengthening was also performed to level the gingival zeniths. The result was a natural looking smile with improved esthetics and symmetry.

Uploaded by

David Colon
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
130 views

Smile Design With Composites: A Case Study: Clinical

This document describes a clinical case study where direct composite veneers were used to address a patient's esthetic concerns. A digital smile design was used to analyze the patient's smile and identify asymmetries in tooth proportions and gingival display. Direct composite veneers using IPS Empress Direct composite were placed on teeth #21-22 to improve their color and shape based on the digital smile design analysis. Crown lengthening was also performed to level the gingival zeniths. The result was a natural looking smile with improved esthetics and symmetry.

Uploaded by

David Colon
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Clinical

Smile design with composites:


A case study
Eduardo Mahn1 and Christian Coachman2

Adhesive dentistry has improved dramatically over the last


decade. Not only are adhesives more reliable and easier to
use, but composites have also changed significantly. With
the addition of nano fillers and improvements in the optical
properties, a large range of indications was created for direct
restorations. Composites have become almost as esthetic as
modern ceramics and it is easier and faster to achieve a
natural gloss, which lasts longer than previously.
Several new indications have therefore presented for
composites. Minimal invasive diastema closures,
reconstructions of peg laterals and direct veneers are now
possible, in some cases, without preparation.
A basic pre-requisite for those indications is a deep
understanding of facial and dental esthetic parameters. The
clinician needs to understand the challenges that each
clinical case presents and to design an appropriate treatment
plan which approaches the case from a multidisciplinary
point of view. Tooth proportions need to be considered in
relation to gingival esthetics and both in relation to the facial
appearance of the patient. It is pointless to make the most
beautiful direct veneer if the contours or the texture do not
match the adjacent teeth or the gingival zeniths are clearly
not symmetric and visible. If, for example, we add a tilted
occlusal plane or an upper teeth midline shift in relation to

Dr. Eduardo Mahn, DDS, DMD, PhD


Universidad de los Andes
Clinica CIPO
Santiago-Chile

16

DMD. Private Practice, So Paulo-SP, Brazil

INTERNATIONAL DENTISTRY AFRICAN EDITION VOL. 3, NO. 6

the facial midline, the results can be frustrating.


For this reason, treatment needs to start from a facial
perspective. Average facial parameters are analized and the
display is evaluated. Asymmetries are detected and the
relationship between the gingiva, teeth and the lips with
the rest of the face is diagnosed. After the challenges are
understood, a treatment plan that will probably involve
periodontal, endodontic and prosthetic aspects is designed..
Finally, the decision of the use of ceramic or composite
restorative materials is considered depending on different
factors. Our philosophy is based on the minimal invasive
concept. As long as we can provide the patient with the
same esthetics, durability and predictability of ceramics, we
will select composites. In cases where many teeth are
involved, multiple diastemas are present or occlusal
imbalances can jeopardize a successful outcome and major
changes need to be made, our choice leans towards
ceramics. Cost can also play a role at times, since there are
no laboratory costs with composites.
Whenever a direct approach is chosen, it is of paramount
importance for the clinician to understand the system he is
using. In the clinical case shown in this article, the system
IPS Empress Direct (Ivoclar Vivadent, Schaan, Liechtenstein)
was chosen, because of its simple layering concept, its
natural looking shades and long lasting gloss. The system is
based on 32 dentin, enamel and effect shades that cover
most of the possible opacity, shades and special effects
present in the majority of patients. Dentin shades are opaque
enough to block what is needed and the enamel shades are
very close to natural enamel, making the shade matching an
easy task.

Clinical

Clinical case
A 24-year-old patient came to our office concerned about
her smile. Her chief complaints were her discolored left
central incisor and left lateral which had an insufficient
composite filling (Figure 1). The digital smile design (DSD)
concept diagnoses esthetic problems from a facial
perspective and, based on a simplified digital analysis from
a few photographs, proposes treatment options and assists
with the interaction between the different specialists on the
team.
The first step was to draw a horizontal and a vertical line.

The picture is centered, moved and rotated until the


bipupilar line becomes horizontal. The facial midline is
subsequently ascertained (Figure 2). Once the picture was
analysed it was obvious that her gingival display was clearly
asymmetric with the gingival zeniths as well as the incisal
borders of the incisors at different levels (Figure 2).
A close-up picture of the smile was superimposed and
used for the next steps (Figures 3 and 4). The correct
proportions were measured (Figure 5) and lines drawn at the
margins of each anterior tooth. The tooth axis and lip
margins were also drawn (Figure 6). The isolated situation is

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

Figure 6

INTERNATIONAL DENTISTRY AFRICAN EDITION VOL. 3, NO. 6

17

Mahn / Coachman

18

Figure 7

shown in Figure 7. Considering the ideal tooth proportions


and positions, lines were drawn starting from the better side
- the right one (Figures 8 and 9). The contours were then
copied, mirrored and pasted on the other side with the ideal
inclination (Figures 10 and 11). The isolated situation is
shown in Figure 12. A close-up photograph using a
contraster was taken. Tooth 21 is obviously discolored and,
as well as tooth 22, shows a deficient composite at the
cervical region (Figure 13). Internal bleaching was performed

Figure 8

Figure 9

Figure 10

Figure 11

Figure 12

Figure 13

INTERNATIONAL DENTISTRY AFRICAN EDITION VOL. 3, NO. 6

Mahn / Coachman

Figure 14

20

Figure 15

Figure 16

Figure 17

Figure 18

with Hydrogen Peroxide at 38% for 20 minutes (Figure 14).


The restorative treatment commenced after a period of ten
days. A direct mock-up with composite was made in order
to check the right length and tooth proportions (Figure 15).
A silicon guide was created with Virtual Putty, based on
the impression of the corrected mock-up. After composite
removal, etching and bonding with Excite F, the silicon guide
was used during the layering process (Figure 16). IPS Empress
Direct Dentin Bleach L and Enamel Bleach L were placed with

the help of a novel composite spatula Optrapad (Ivoclar


Vivadent). The newly design foam helps to adapt the
composite far more efficiently (Figure 17). In order to
achieve the opalescent effect, OPAL shade from IPS Empress
direct was used in combination with the shade Trans 30. The
direct veneers (teeth 21 and 22) were finished first with burs
in order to give natural texture and then polished with
Astropol/Astrobrush for the final gloss (Figure 18). Crown
lengthening was then performed on tooth 11 and 12 with

INTERNATIONAL DENTISTRY AFRICAN EDITION VOL. 3, NO. 6

Mahn / Coachman

Figure 19

Figure 20

an oscillating instrument (Komet, Brasseler) with the purpose


of leveling the gingival zeniths (Figure 19). Figure 20 shows
the clinicians view of the natural integration of the
composite material in comparison with untouched teeth.
Thanks to proper diagnosis with the help of the Digital

Smile Design (DSD) concept, the understanding of the


esthetic challenges and the optical properties of IPS Empress
Direct an excellent esthetic result can be appreciated, with a
confident and happy patient at the end of the treatment
(Figure 21).

Figure 21

22

INTERNATIONAL DENTISTRY AFRICAN EDITION VOL. 3, NO. 6

You might also like