KOM206 Module 3

ARITHMETIC AND BOOLEAN OPERATORS

Lecturers: ARD, SWJ

Lab Tutors: VDE, WUL

OBJECTIVES
1.
2.
3.
4.

Able to use Arithmetic and Boolean operators

Able to define flags in assembly language
Able to create a simple program using arithmetic and Boolean operators
Able to use assembly instructions, such as: INC, DEC, SUB, ADD, MUL, DIV, NEG, NOT, OR,
XOR

THEORITICAL REVIEW
INC and DEC Operation
The INC (increment) and DEC (decrement) instructions, respectively, add 1 and
subtract 1 from a register or memory operand. The syntax is
INC reg/mem
DEC reg/mem

Following are some examples:

.data
myWord WORD 1000h
.code
inc myWord ; myWord = 1001h
mov bx, myWord
dec bx

; BX = 1000h

The Overflow, Sign, Zero, Auxiliary Carry, and Parity flags are changed according to
the value of the destination operand. The INC and DEC instructions do not affect the Carry
flag.
ADD Instruction
The ADD instruction adds a source operand to a destination operand of the same size.
The syntax is
ADD dest, source

Source is unchanged by the operation, and the sum is stored in the destination
operand. Here is a short code example that adds two 32-bit integers:
.data
var1 DWORD 10000h
var2 DWORD 20000h
.code
mov eax,var1 ; EAX = 10000h
add eax,var2 ; EAX = 30000h106
1

KOM206 Module 3

The Carry, Zero, Sign, Overflow, Auxiliary Carry, and Parity flags are changed
according to the value that is placed in the destination operand.
SUB Instruction
The SUB instruction subtracts a source operand from a destination operand. The set
of possible operands is the same as for the ADD and MOV instructions. The syntax is
SUB dest,source

Here is a short code example that subtracts two 32-bit integers:

.data
var1 DWORD 30000h
var2 DWORD 10000h
.code
mov eax,var1 ; EAX = 30000h
sub eax,var2 ; EAX = 20000h

Flags The Carry, Zero, Sign, Overflow, Auxiliary Carry, and Parity flags are changed
according to the value that is placed in the destination operand.
NEG Instruction
The NEG (negate) instruction reverses the sign of a number by converting the
number to its twos complement. The following operands are permitted:
NEG reg
NEG mem

MUL/IMUL Instruction
There are two instructions for multiplying binary data. The MUL (Multiply)
instruction handles unsigned data and the IMUL (Integer Multiply) handles signed data. Both
instructions affect the Carry and Overflow flag.
Multiplicand

Multiplier

Product

AL

reg/mem8

AX

AX

reg/mem16

DX:AX

EAX

reg/mem32

EDX:EAX

The following statements multiply AL by BL, storing the product in AX. The Carry
flag is clear (CF = 0) because AH (the upper half of the product) equals zero:
mov al,5h
mov bl,10h
mul bl ; AX = 0050h, CF = 0

DIV/IDIV Instruction
The division operation generates two elements - a quotient and a remainder. In case
of multiplication, overflow does not occur because double-length registers are used to keep
the product. However, in case of division, overflow may occur. The processor generates an
interrupt if overflow occurs. The DIV (Divide) instruction is used or unsigned data and the
2

KOM206 Module 3

IDIV (Integer Divide) is used or signed data.

Dividend

Divisor

Quotient

Remainder

AX

reg/mem8

AL

AH

DX:AX

reg/mem16

AX

DX

EDX:EAX

reg/mem32

EAX

EDX

The following instructions perform 16-bit unsigned division (8003h/100h),

producing a quotient of 80h and a remainder of 3. DX contains the high part of the dividend,
so it must be cleared before the DIV instruction executes:
mov dx,0 ; clear dividend, high
mov ax,8003h ; dividend, low
mov cx,100h ; divisor
div cx ; AX = 0080h, DX = 0003h

AND Instruction
The AND instruction performs a boolean (bitwise) AND operation between each pair
of matching bits in two operands and places the result in the destination operand: AND
destination,source The following operand combinations are permitted, although immediate
opperands can be no larger than 32 bits:
AND reg,reg
AND reg,mem
AND reg,imm
AND mem,reg
AND mem,imm

For example, suppose AL is initially set to 10101110 binary. After ANDing it with
11110110, AL equals 10100110:
mov al,10101110b
and al,11110110b ; result in AL = 10100110

OR Instruction
The OR instruction performs a boolean OR operation between each pair of matching
bits in two operands and places the result in the destination operand:
OR destination,source

The OR instruction uses the same operand combinations as the AND instruction:
OR reg,reg
OR reg,mem
OR reg,imm
OR mem,reg
OR mem,imm

For example, if AL is initially equal to 11100011 binary and then we OR it with

00000100, the result equals 11100111:
3

KOM206 Module 3
mov al,11100011b
or al,00000100b

; result in AL = 11100111

The OR instruction always clears the Carry and Overflow flags. It modifies the Sign,
Zero, and Parity flags in a way that is consistent with the value assigned to the destination
operand.
XOR Instruction
The XOR instruction performs a boolean exclusive-OR operation between each pair
of matching bits in two operands and stores the result in the destination operand:
XOR destination,source

The XOR instruction always clears the Overflow and Carry flags. XOR modifies the
Sign, Zero, and Parity flags in a way that is consistent with the value assigned to the
destination operand.
NOT Instruction
The NOT instruction toggles (inverts) all bits in an operand. The result is called the
ones complement. The following operand types are permitted: NOT reg NOT mem For
example, the ones complement of F0h is 0Fh:
mov al,11110000b
not al

; AL = 00001111b

No flags are affected by the NOT instruction.

FLAGS
The Carry flag indicates unsigned integer overflow. For example, if an instruction has an
8-bit destination operand but the instruction generates a result larger than 11111111 binary,
the Carry flag is set.
The Overflow flag indicates signed integer overflow. For example, if an instruction has a
16- bit destination operand but it generates a negative result smaller than 32,768 decimal,
the Overflow flag is set.
The Zero flag indicates that an operation produced zero. For example, if an operand is

subtracted from another of equal value, the Zero flag is set.

The Sign flag indicates that an operation produced a negative result. If the most
significant bit (MSB) of the destination operand is set, the Sign flag is set.
The Parity flag indicates whether or not an even number of 1 bits occurs in the least
signifi- cant byte of the destination operand, immediately after an arithmetic or boolean
instruction has executed.
The Auxiliary Carry flag is set when a 1 bit carries out of position 3 in the least
significant byte of the destination operand.

KOM206 Module 3

Here is sample code for adding and subtracting:

section

.text

global _start
_start:

;must be declared for using gcc

;tell linker entry point

mov

eax,'3'

sub

eax, '0'

mov

ebx, '4'

sub

ebx, '0'

add

eax, ebx

add

eax, '0'

mov

[sum], eax

mov

ecx,msg

mov

edx, len

mov

ebx,1

;file descriptor (stdout)

mov

eax,4

;system call number (sys_write)

int

0x80

;call kernel

mov

ecx,sum

mov

edx, 1

mov

ebx,1

;file descriptor (stdout)

mov

eax,4

;system call number (sys_write)

int

0x80

;call kernel

mov

eax,1

;system call number (sys_exit)

int

0x80

;call kernel

section .data
msg db "The sum is:", 0xA,0xD
len equ $ - msg
segment .bss
sum resb 1

TASKS
1. What will be the value of BX and flags affected after the following instructions execute?
mov bx,0FFFFh
and bx,6Bh
2. Create a program for calculating this formula:

C = (A+B)/D
with A= 3, B= 7, D= 4
3. Create a program for calculating this formula:
5

KOM206 Module 3

C = (A-B)/(D+A)
with A= 3, B= 7, D= 4
4. Write code using byte operands that adds two negative integers and causes the Overflow
flag to be set.
5. Write an assembly language program to compute the average of 4 grades. Use memory
locations for the 4 grades. Make the grades all different numbers from 0 to 100. Store the
average of the 4 grades in memory and also store the remainder from the division in
memory
6. Write an assembly language program to compute the distance squared between 2 points
in the plane identified as 2 integer coordinates each, stored in memory. Remember the
Pythagorean Theorem!
REFERENCES
[1] Seyfarth R. 2012. Introduction to 64 Bit Intel Assembly Language Programming for
Linux. CreateSpace
[2] Irvine K. 2011. Assembly Language for X86 Processors. Pearson Education, Limited
[Online]. Available: http://books.google.co.id/books?id=0k20RAAACAAJ
[3] Cavanagh J. 2013, X86 Assembly Language and C Fundamentals. CRC Press, 2013.
[4] http://www.tutorialspoint.com/assembly_programming