Scribd
Upload
31 views

Valves Type

df

Uploaded by

Nacho.p
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
31 views

Valves Type

df

Uploaded by

Nacho.p
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Pumps India : India's only exclusive bi-monthly magazine on PUMP industry......

The Complete Magazine on Pump Industry


Home | About Us | Circulation | Advertisement | Directory | Product Database | New Articles

TYPES OF VALVES
Specimen Copy of
Pumps India

1. Throttling Valves

Specimen Copy of
Valves India

Types

Advantages

Disadvantages

1. Diaphragm valve

The interior of this valve is very smooth,


and can be easily cleaned.

The valve leaks upon the failure of the diaphragm.

2. Butterfly valve

The rubber-lined valve is a good, cheap


valve for all types of low pressure, noncritical services. This valve can also be
lined with a resistant polymer for very
corrosive service.

Rubber lined valve has pressure limitations.

For advertisement and


subscription contact :
[email protected]

3. Needle valve

It gives good flow control; It can have


very high pressure ratings.

It causes a high pressure drop & presents a


greater risk of clogging due to entrained solids.

For any Query related to


Pumps.Click Here

4. Pinch valve

This valve can be tightly shut off, and


will even close when entrained solids
are present in the flowing fluid.

The pressure rating of this valve is low. The


compatibility of the hose material with the process
stream is critical.

5. Globe valve

It can be used to modulate flow or to


stay partially open to impose a certain
pressure drop.

It passes flow in only one direction.

6. Stop check valve

Besides throttling like a globe valve, this


valve also prevents reverse flow.

It's design is more complex than that of globe and


check valves.

7. Angle valve

Pressure drop is slightly less than a


conventional globe valve.

It complicates that piping layout.

8. Y-pattern globe valve

It can throttle and is often used in high


pressure service.

It complicates the piping design.

2. On-off valves
Types

Advantages

Disadvantages

1. Ball valve

Pressure drop is very low; it is suitable


for handling erosive fluids & slurries.

Fluids that set up or polymerize could freeze the


ball.

2. Plug valve

Pressure drop is fairly low; lubricated


type is very good for slurry and catalyst
service; plastic-sleeved plug is used for
highly corrosive services.

Lubricated plug valve should be lubricated every


time it is operated; plastic valves have a limited
operating temperature (400F)

3. Hydrant valve

Useful in freezing climates.

-------------

4. Gate valve

Pressure drop is low; this valve weighs


and costs less than other comparable
size valves.

It is almost completely incapable of throttling.

5. Ram valve/
Displacement valve

It is very useful for taking accurate


samples of solid bearing streams.

These valves are custom designed to some


exact, correct valve should be chosen for each
application.

Types

Advantages

Disadvantages

1. Split disc-check valve

It is generally the least expensive check


valve in medium to large sizes. Shutoff
is somewhat better in this valve.

It is not suitable for large material.

3. Non - return valves

file:///C|/Documents%20and%20Settings/Administrator/My%20Documents/Tech%20Data%201/Valve_Types.htm (1 of 2)2/13/2007 3:57:08 PM

PUMPING LIFE TO INDUSTRIES

Pumps India : India's only exclusive bi-monthly magazine on PUMP industry......

2. Lift-check valve

In small sizes, it is also one of the


cheapest check valve. In large sizes, it
can be used in pulsating flows.

The pressure drop is fairly high.

3. Swing-check valve

It will operate well whether installed


horizontally or vertically. The body can
be equipped with drain or bypass taps.

It is large & heavy compared with other types of


such valves. This valve is not suitable for
pulsating flows containing entrained material.

4. Tilting-disc-check valve

The pressure drop is lower than that of


the swing-check valve.

IT is large & heavier than the swing-check valve.


An over-sized valve is prone to flutter or
slamming.
Back

105, AHINSA TOWER, M.G. Road, Indore, PIN - 452001,M.P. INDIA


Phone : 91-731-4066745, 2512002 FAX : 91-731-2512002 , e mail : [email protected]

Site Developed & Maintained by INFOCRATS Web Solutions P. Ltd.

file:///C|/Documents%20and%20Settings/Administrator/My%20Documents/Tech%20Data%201/Valve_Types.htm (2 of 2)2/13/2007 3:57:08 PM

You might also like