Scribd
Upload
148 views

57.design & Development of GSM Based Vehicle Theft Control System

This document describes the design and development of a GPS and GSM-based vehicle theft control system. The system uses a microcontroller connected to a GSM modem and GPS modem installed in the vehicle. When the vehicle is stolen, the owner can call the GSM modem to remotely lock the engine and receive an SMS with the vehicle's location from the GPS. The owner is then the only one who can restart the engine by entering a password. The low-cost system aims to prevent vehicle theft using embedded GSM and GPS technology.

Uploaded by

Satish Reddy
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
148 views

57.design & Development of GSM Based Vehicle Theft Control System

This document describes the design and development of a GPS and GSM-based vehicle theft control system. The system uses a microcontroller connected to a GSM modem and GPS modem installed in the vehicle. When the vehicle is stolen, the owner can call the GSM modem to remotely lock the engine and receive an SMS with the vehicle's location from the GPS. The owner is then the only one who can restart the engine by entering a password. The low-cost system aims to prevent vehicle theft using embedded GSM and GPS technology.

Uploaded by

Satish Reddy
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Design & Development Of GSM Based Vehicle

Theft Control System


ABSTRACT
In recent years, vehicle thefts are increasing at an alarming
rate around the world. People have started to use the theft control systems installed in their
vehicles. The commercially available anti-theft vehicular systems are very expensive. This paper
deals with the design & development of a theft control system for an automobile, which is being
used to prevent / control the theft of a vehicle. The developed system makes Use of an embedded
system based on GSM /GPS technology (GPS technology is further enhancement of the base
paper). The designed & developed System is installed in the vehicle. An interfacing GSM
MODEM (SIMCOMs SIM300 GSM operates in the 900MHz and 1.8GHz bands GSM supports
data transfer speeds of up to 9.6 kbps) and the GPS which are connected to the microcontroller,
which is in turn, connected to the engine.
Once , the vehicle is being stolen, the information is being
used by the vehicle owner for further processing. Where by sitting at a remote place, a particular
number is dialed by them to the interfacing GSM MODEM that is with the hardware kit which is
installed in the vehicle. By reading the signals received by the mobile, the engine is locked
automatically and sends the SMS to the dialed no stating the exact position using GPS modem.
Again it will come to the normal condition only after entering a secured password. The owner of
the vehicle.
The main concept in this design is introducing the GSM
and GPS Technologies into the embedded system. The designed unit is very simple & low cost.
The entire designed unit is on a single chip. When the vehicle is stolen, owner will give a call to
the kit placed in vehicle engine automatically stop which is indicated by the DC motor in turn
sends the SMS to the authorized person showing the exact location using GPS. The car will
unlock until the password is entered with help of 4x3 key pad interfaced to LPC 2148 by the
authorized person.

BLOCK DESIGN PROPOSAL FOR THE

SYSTEM

POWER SUPPLY
UNIT
GSM

LCD
CONTROLLER

GPS

ON/OFF
BUTTON

ENGINE OF
VEHICLE
(DC
MOTOR)

HARDWARE REQUIREMENT FOR IMPLEMENTATION OF THE


FUNCTION MODULE

CONTROLLER (AT89S52).
GSM MODEM (SIM900A).
GPS MODEM (GPS 634R).
LCD MODULE.
RELAY.
DC MOTOR.
POWER SUPPLY UNIT.
MAX 232 IC.
MISCELLINOIUS COMPONENTS.

SOFTWARE REQUIREMENT FOR IMPLEMENTATION OF THE


FUNCTION MODULE
TOOL:

FOR AT89S52 BASED:


The KEIL U version IDE which Keil C51 Product is a complete software development
environment for the 8051 microcontroller family.
Us Flash+ Ver. 4.0.0 programmer for MCS51 microcontrollers developed by UC micro
systems.
LANGUAGE:

All editions provide a complete Embedded C/C++ development environment and KEIL
includes extensive middleware libraries.
PLATFORM:

WINDOWS XP.

You might also like