SMD/BLOCK Type

EMI Suppression Filters EMIFIL

Introduction
Murata Manufacturing Co., Ltd. has been developing the EMI suppression
device market since the invention of 3 terminal capacitor DS310 series in
1979. Also, we have been striving to develop and popularize new noise
countermeasure technologies as well as new products in the concept of
"Develop unique products," to become our customers best solution partner.
We hope you can find the key solution to your noise problem.

Explanation of symbols
in this catalog

Features of each series

Features of each item

New product

All Products
Flow soldering available

Exist in design kit

Flow OK

Rated current 1A or more

Reflow

Reflow soldering available

OK

Rated current 3A or more

Rated current 10A or more
Meets large current lines

Chip Ferrite Bead

Meets high frequency noise

up to 1-2GHz

Meets ultra high frequency noise

up to 10GHz

LC Combined Type Filter

Low cut-off frequency type for UHF band

noise, which affects digital TV tuner

Chip Common Mode Choke Coil

For high speed differential signal lines

(USB2.0/LVDS/IEEE1394 etc.)
For ultra high speed differential signal lines
(HDMI/DVI/Display Port/USB3.0 etc.)
Line impedance has been matched to
transmission lines

EU RoHS Compliant
s
s

All the products in this catalog comply with EU RoHS.

EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use of Certain
Hazardous Substances in Electrical and Electronic Equipment."
For more details, please refer to our website 'Murata's Approach for EU RoHS'
(http://www.murata.com/info/rohs.html).

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

CONTENTS

Selection Guide for Noise Suppression Filters

EMI Filter Selection by Application

aDigital Still Camera 4

aBlu-ray/DVD 6

aSmartphone 5
aLCD-TV 7

EMI Filter Selection by Circuits and Noise Frequency

BL

p Chip Ferrite Bead

Series Introduction
Part Numbering
Series Line Up
Product Detail
!Caution/Notice
Soldering and Mounting
Packaging
Design Kits

14
16
18
24
99
100
104
105

Chip Ferrite Bead

Product Guide 10

p Chip Common Mode Choke Coil

Series Introduction
Part Numbering
Series Line Up
Product Detail
!Caution/Notice
Soldering and Mounting
Packaging
Design Kits

BNX Block Type EMIFILr

Series Line Up
Function Example
Product Detail
!Caution/Notice
Soldering and Mounting
Packaging
Design Kits

170
172
174
177
203
205
212
214

Chip Common Mode Choke Coil

DL p/PL

112
114
117
121
154
156
163
165

218
218
221
225
227
231
232

Block Type EMIFILr

Series Introduction
Part Numbering
Series Line Up
Product Detail
!Caution/Notice
Soldering and Mounting
Packaging
Design Kits

Chip EMIFILr

NFp Chip EMIFILr

Part Numbering 234

Product Detail 235
Notice 238
Product Guide by Size 239
Part Number Quick Reference 240
Alphabetic Product Name Index 240
Introduction of Related Catalogs 241
Introduction of EMI/MLCC/Inductor
special web site "EMICON-FUN!" 242
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Microwave Absorber

EA Microwave Absorber

Selection Guide for Noise Suppression Filters

oFeatures & Suitable Circuits

Type

Features

Suitable Circuits

Ferrite Bead
BLM/BLA Series

Miniaturized
GND connection unnecessary
Effective at low impedance line

Application set with less

noise radiation
Low impedance line

Great noise suppression effect

With effect as By-Pass capacitor (Lineup for Power)
Good noise separation from signal (LC filter for Signal)
Effective at high impedance line

Application set with higher

noise radiation
High impedance line
Circuit with By-Pass capacitor
Circuit driven by high
frequency

Possible to suppress noise with less affect of ultra

high speed signal
Great effect for common mode noise
Less magnetic saturation by current

High speed differential

signal line
I/F cable driver
Power line

Capacitor Type
NFM/NFA/NFE/NFR/
NFL/NFW Series

Common Mode
Choke Coil

oExample

Common Mode Choke Coil

Suppresses common mode noise.

Ferrite Bead Inductor

Suppresses differential mode noise.

Common Mode Choke Coil

Suppresses common mode noise.
Vcc
DC power supply
input section

USB/IEEE1394

GND

Three-terminal Capacitor
Suppresses differential mode noise.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Selection Guide for Noise Suppression Filters

oAdvantages to Using Common Mode Choke Coils

1. Great Effect for Common Mode Noise
Differential mode inductors work as a half
impedance for common mode noise.
Common Mode Choke Coils are effective for
common mode noise.

Ex) 2pcs of differential mode inductor

Noise source

Load

~
Z

Stray
capacitance

N
Stray
capacitance
Reference ground surface

2. Possible to Suppress Noise with Less Affect of Ultra High Speed Signal
Common Mode Choke Coils can suppress Noise with less affect of Signal,
even if the frequency range of Signal and Noise are the same, because
they separate each conductive mode of current.

Signal spectrum
(Differential mode)

Noise spectrum
(Common mode)

Using differential mode

inductor

Signal is attenuated
with Noise suppression

Frequency

Frequency

Noise is suppressed
with less effect on
Signal

Using Common Mode

Choke Coil

Frequency

3. Less Magnetic Saturation by Current

Common Mode Choke Coils are effective for noise suppression of DC
power lines, due to their less magnetic saturation at high power current,
that comes from their construction of cancelling magnetic flux of differential
mode current at each coil.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

EMI Filter Selection by Application

Digital Still Camera

Application Sample

IC Power Line

Data Line

Data Line

BLM**B/BLA**B

BLM**P/BLM**AX

DLP0NS

NFM**P*

BLM**B/BLA**B

p24
p27

p26
p80

p187

p26
p80

p123

Flash
Memory

Lens
Image Sensor
Controller
A/D Converter

Image
Sensor

LCD
Panel

LCD
Controler
CPU
(DSP,JPEG)

Speaker
Lens
Motor

Motor
Driver

Audio
Processer
MCU

USB I/F
Microphone

Card
Slot

AC
Adapter
Power Unit

USB Differential Data Line

DLM11S

p185

Battery
Storage
Media

DLP0QS/DLP0NS/11S

Power Line
BLM**P/BLM**AX

p24
p27

NFM**P*

p186
p187
p189

AC Adapter Input
DLW5

p123

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

p179
p181

EMI Filter Selection by Application

Smartphone
Application Sample

RF Module
BLM03/BLM15

LCD/Camera
p27
p36

NFA18SL

p145

DLP0QS

p186

DLP0NS/DLP1ND/DLP11S
p187
p189
p193

WiFi

BT

Touch
Panel

LCD
Monitor

SIM Slot
Micro SD Slot

GPS
LCD
Driver
Camera Module
Cellular RF

ACPU

Cellular BB

Audio IC
Speaker
D/D
Converter

Mic
Flash
Memory
Power
Management IC

NFC

DRAM
USB
Battery

IC Power Line

Audio Line

USB

NFM15PC/NFM18PC

BLM02/03

DLP0QS

p186

DLP0NS

p187

p123
p126

BLM15P/BLM18KG
p36
p52

p24
p27

DLM11G
p184

DLP11S/11R/11T
p189
p190
p191

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

EMI Filter Selection by Application

Blu-ray/DVD
Application Sample

IC Power Line
BLM18P/18K/18EG/21P

Data Line

p50
p52
p66
p96

BLM15B/15H/15G

p44
p88
p91

NFM18PS/18PC
p125
p126

Control Panel

BLA

p80

Optical
Drive

Clock Line

Digital Board

BLM**B

Panel Controller

NFL18ST/18SP/NFL21SP

System
Control

Memory

p26

p141
p144

CLK
System
Processor

Imaging
Processor
to Power Supply
Power Line

CLK

Audio Line
Video Line
Data Line
Power Line

Audio
AD/DAC

Video
Encoder
Decoder
1394
Transceiver

Demodulatio
IC

Power Line
BLM18P/18K/18EG

HDMI
Transmitter

Analog Board
NFM**P*

p123

DLW5

p179
p181

TV Tuner
Head Phone

IEEE1394
DLM11S

HDMI
p185

DLP11S/DLP2AD
p189
p194

DLP11S/DLP2AD
p189
p194

DLW21

p197

Video

DLW21

p197

Audio

BLM**B/BLA**B

DLM11G

p26
p80

NFL18ST/18SP/NFL21SP
p141
p144

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

p50
p52
p96

p184

EMI Filter Selection by Application

LCD-TV
Application Sample

RSDS Line
DLM11S

p185

LVDS
RSDS

DLP11S/DLP2AD
p189
p194

Display

Signal Processing

LVDS Line

Resalution Convert
Gray-Scale
Voltage
Generater

Timing
Controller

Scaler

DLM11S

p185

Frame
Memory

IP Convert

DLP11S/DLP2AD
p189
p194

Source Driver

Gate Driver

Display

Audio
Processor

Picture Processing
Engine

Audio IN/OUT

Audio
Power Amp
A/D
Convert

Back
Light

Video
Decoder

Backlight Up
Convert Panel
AC
Converter

Audio Line

Picture Processing
Environment IC

Tuner
(BS/CS/UHF)

Analog I/O
(RGB Composite)

Digital I/O
(DVI, iLink/HDMI)

DLW5

p179
p181

Power Line
Digital I/O

IC Power Line
NFM18PS/18PC

DLM11S
p125
p126

AC IN

DLP11S/DLP2AD
p189
p194

BLM18P/18K/18EG
p50
p52
p96

p185

DLW21S

p197

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

EMI Filter Selection by Circuits and Noise Frequency

oChip Ferrite Bead / Chip EMIFILr
Circuit Type?
General Signal Line

Power Line

High Speed Signal Line

Under 10MHz

Over 10MHz

BLM02BX

p24

BLM02AX
BLM03AX

BLM03B

p30

p27

0201(0603)/0.75-0.9A/Imp.22-33
Low DC Resistance / High Current Type
p28

Inductor Type
(Suppression Effect: Normal)

Noise Frequency: Under 1GHz

0201(0603)/1-1.8A/Imp.22-80

BLM03AG

p32

BLM15AG

p42

0402(1005)/Imp.10-1000

p36

0402(1005)/0.9-3A/Imp.33-600

BLM15PG/PD

BLM21A

p66

BLM21R

p75

0805(2012)/Imp.120-1000
Array Type

1206(3216)/1.5-6A/Imp.33-600

BLA2AA
p77

BLM41P

p79

BLE32P

0805(2012)/Imp.5-2700
Array Type
p80

BLA2AB
p63

0804(2010)/Imp.10-1000
p83

BLA31B
p68

1206(3216)/Imp.120-1000

0805(2012)/Imp.120-1000

0805(2012)/1.5-6A/Imp.22-330

BLM31P

BLM18R

p50

0603(1608)/0.5-3A/Imp.30-470

BLM21P

p62

0603(1608)/Imp.120-1000

0402(1005)/1-2.2A/Imp.10-120

BLM18P

BLM18T

p70

BLM21B

p40

0603(1608)/Imp.120-1000
p38

p58

BLM18B
0603(1608)/Imp.5-2500

0402(1005)/0.35-1.74A/Imp.10-1000

BLM15PX

p46

BLM15B
0402(1005)/Imp.5-1800

p56

0603(1608)/Imp.120-1000

BLM15AX

p44

BLM15BX

0402(1005)/0.25-0.6A/Imp.75-1800

0201(0603)/Imp.10-1000

BLM18A

1806(4516)/1.5-6A/Imp.60-1000

p73

p80

0804(2010)/Imp.120-1000

BLA31A

p83

1206(3216)/Imp.30-1000

1210(3225)/10A/Imp.30
Low DC Resistance Type

BLM18K

p52

0603(1608)/1.3-6A/Imp.26-600
p54

BLM18S
0603(1608)/1.5-6A/Imp.26-330

NFM15PC

p123

0402(1005)/Cap.0.047-4.3F

NFM18PC

p126

0603(1608)/2-4A/Cap.0.1-2.2F

Capacitor Type
(Suppression Effect: High)

Noise Frequency?

BLM03PX

p34

0201(0603)/Imp.10-600

0201(0603)/0.2-1A/Imp.10-1000

BLM03PG

p26

01005(0402)/Imp.150

01005(0402)/Imp.10-120

NFM21PC

NFM31KC

p130

NFM3DCC

p131

NFM41CC

p132

1806(4516)/Cap.22-22000pF
Array Type

p133

NFA31CC

NFE61PT
p122

p121

p152

p153

1206(3216)/6.8-100/Cap.10-100pF

NFA18SL/NFA18SD

p145

NFA21SL

p148

0603(1608)/Cut off 50-480MHz p147

2706(6816)/2A/Cap.33-4700pF
Block Type

0805(2012)/Cut off 50-330MHz

p221

BNX022/023

p150

0805(2012)/22-100/Cap.10-100pF
Array Type (RC/LC Combined)

NFA31GD
p122

2706(6816)/Cap.33-4700pF

p144

1206(3216)/Cut off 10-500MHz

RC Combined

NFR21GD

1206(3216)/Cap.22-2200pF

p143

0805(2012)/Cut off 10-500MHz

NFW31SP
p139

p141

0603(1608)/Cut off 150-500MHz

NFL21SP
p138

p140

0603(1608)/Cut off 50-500MHz

NFL18SP
p137

1206(3216)/Cap.22-22000pF
T Circuit Filter Feed Through Type

NFE31PT
p121

1206(3216)/6A/Cap.22-2200pF

NFE61PT

NFL18ST
p136

1205(3212)/Cap.22-22000pF

1806(4516)/2-6A/Cap.0.2-1.5F
T Circuit Filter Feed Through Type

NFE31PT

p135

0805(2012)/Cap.22-22000pF

1206(3216)/6-10A/Cap.0.01-0.1F

NFM41PC

NFM18CC

0402(1005)/Cut off 150-500MHz

NFM21CC

1206(3216)/6A/Cap.27F

LC Combined

NFL15ST

p129

1205(3212)/2A/Cap.0.022F

NFM31PC

p134

0402(1005)/Cap.2200-22000pF
0603(1608)/Cap.22-22000pF

0805(2012)/2-6A/Cap.0.1-4.7F

NFM3DPC

NFM15CC

10-15A
p85

Inductor Type
(Suppression Effect: Normal)

0201(0603)/Imp.600-1200

BLM15HG
BLM18HG

p88
p92

BLM03HB

p85

BLM15HD

p88

0402(1005)/Imp.600-1800
p92

0603(1608)/Imp.330-1000

BLM15HB

p88

0402(1005)/Imp.120-220

BLM18HD

p92

0603(1608)/Imp.470-1000

BLM18HE

BLM18HE

p92

BLM03E

BLM18HB

p87

0201(0603)/0.4-0.6A/Imp.25-50

BLM15E

p92

0603(1608)/Imp.600-1500

0603(1608)/0.5-0.8A/Imp.600-1500

p92

0603(1608)/Imp.120-330
p90

0402(1005)/0.7-1.5A/Imp.120-220
p96

0603(1608)/0.5-2A/Imp.100-600

NFM18PS

LC Combined

p125

NFL18ST

0603(1608)/2A/Cap.0.47-1.0F

NFM21PS

p141

0603(1608)/Cut off 50-500MHz

Array Type (LC Combined)

p128

0805(2012)/4A/Cap.10F

NFA18SL/NFA18SD

p145

NFA21SL

p148

0603(1608)/Cut off 50-480MHz p147

0805(2012)/Cut off 50-330MHz

BLM15GG

p91

0402(1005)/Imp.220-470

BLM18G

BLM15GA
0402(1005)/Imp.75

p98

0603(1608)/Imp.470

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

p85

0201(0603)/Imp.190

0603(1608)/Imp.470-1000

BLM18HK

BLM03HD
0201(0603)/Imp.330-1000

0402(1005)/Imp.600-1000

BLM18E

Inductor Capacitor Type

Type (Suppression Effect: High)

Noise Frequency:
High-GHz Band
(1GHz to 10GHz)

Noise Frequency: GHz Band (800MHz to 2.5GHz)

BLM03HG

p91

EMI Filter Selection by Circuits and Noise Frequency

oChip Common Mode Choke Coil

Circuit Type?
High Speed Differential Signal Line
DC Power Line

High Speed Signal Line

Ultra High Speed Signal Line

(USB/LVDS/IEEE1394/mipi etc.)

(HDMI/DVI/Display Port etc.)

p177

DLW5AH

2014(5036)/0.2A/Imp.4000
p179

DLW5AT

2014(5036)/1-6A/Imp.50-2700
p177

DLW5BS

2020(5050)/0.5-5A/Imp.190-3000
p179

DLW5BT

2020(5050)/1.5-6A/Imp.100-1400
High Current Type Automotive Available
p202

PLT10HH

12.9mmx6.6mm
/6-18A/Imp.45-1000

DLM11S

p185

DLP0QSN

025020(0605)/Imp.7-35
p186

03025(0806)/Imp.7-15
p187

DLP11SN

0504(1210)/Imp.35-90
p189

p189

p179

2020(5050)/1.5-6A/Imp.100-1400

0504(1210)/Imp.80
p199

DLW21S_HQ

p197

0805(2012)/Imp.67-120
Array Type

p197

0805(2012)/Imp.67-500

DLP31S

DLW5BT

p189

DLP11TB

0805(2012)/Imp.67-180

DLW21S_S/X

p179

0504(1210)/Imp.15-40

0504(1210)/Imp.45

DLW21H

DLW5AT

p189

DLP11RB

0504(1210)/Imp.67-330

DLP11RN

p184

2014(5036)/1-6A/Imp.50-2700
p189

DLP11SA

03025(0806)/Imp.28-120

DLM11G
0504(1210)/Imp.600

p187

DLP0NSA

025020(0605)/Imp.60

DLP0NSC/SN

p186

DLP0QSA

0504(1210)/Imp.45-90

Audio Line

p194

DLP2ADA

p192

0804(2010)/Imp.35-90

1206(3216)/Imp.120-550

DLW31S

p200

1206(3216)/Imp.90-2200
Automotive Available

DLW43S

p201

1812(4532)
Array Type

DLP1ND

p193

05025(1506)/Imp.35-90

DLP2ADN

p194

0804(2010)/Imp.67-280

DLP31D

p196

1206(3216)/Imp.90-440

Guide of Digits in this Chart:

ofor BLM03P

ofor NFA18S

0201(0603)/0.75-0.9A/Imp.22-33
Size

(inch)

Size Rated Current

(mm)

Impedance

0603(1608)/Cut off 50-480MHz

Size
(inch)

ofor BNX022/023

Size
(mm)

Cut-off Frequency

ofor DLW5BS

10-15A/Range1MHz-2GHz
Rated Current Effective Frequency Range

2020(5050)/0.5-5A/Imp.190-3000
Size
(inch)

Size Rated Current Impedance

(mm)

ofor NFR21GD

0805(2012)/22-100/Cap.10-100pF
Size
(inch)

Size
(mm)

Resistance

Capacitance

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Product Guide

BL p
Inductor Type

For General Signal Lines

Signal Lines Type

BLM02AX
BLM03AX
BLM15AX
BLM03AG
BLM15AG
BLM18A
BLM21A
BLM18T

p24

p30

p40

p32

p42

p56

p68

p62

BLA2AA

p80

BLA31A

p83

(4 circuits array)
(4 circuits array)

For Digital
Interface For High Speed Signal Lines
Lines

For General Band Noise

Universal
Type
[ Power
Lines /
Signal
Lines ]

Series

BLM02BX
BLM03B
BLM15B
BLM18B
BLM21B

p34

p44

p58

p70

BLA2AB

p80

BLA31B

p83

(4 circuits array)
(4 circuits array)

BLM18R
BLM21R
BLM03PX*
BLM03PG
BLM15P*

Power Lines Type

p26

BLM18P*
BLM21P*
BLM31P*
BLM41P*

p63

p73

p28

p27

p36

p50

p66

p75

p77

BLM18K*

p52

BLM18S*

p54

(Low DC Resistance Type)

(Low DC Resistance Type)

BLM03E*
BLM15E*
BLM18EG*
BLM18HE*
BLM03HG
BLM03HD
BLM03HB

Signal Lines Type

For GHz Band Noise

Universal Type
[ Power Lines /
Signal Lines ]

BLE32P

BLM15HG
BLM15HD
BLM15HB
BLM18HG
BLM18HD
BLM18HB

Signal Lines
Type

For High-GHz
Band Noise

BLM18HK
BLM15GG
BLM15GA
BLM18G

p79

p87

p90

p96

p92

p85

p85

p85

p88

p88

p88

p92

p92

p92

p92

p91

p91

p98

Effective Frequency Range

Impedance () at 100MHz

Size Code
in inch (in mm)

10

01005 (0402)

10

0201 (0603)

10

0402 (1005)

10

0201 (0603)
0402 (1005)

100
70

120

80 120
70

30

(Applicable Frequency Ranges are only for reference.)

1000

240

120

10

80
70 120

10

70

600 1000
600 1000

220
240

120

600 1000
600 1000

220

220
470
330
120 150
600 1000
220
470
120 150
330
600 1000

0603 (1608)
0805 (2012)
0603 (1608)

120

220

600 1000

0804 (2010)

120

220

600 1000

120

220

600 1000

1206 (3216)

30

60

150

01005 (0402)
33

0201 (0603)
0402 (1005)
0603 (1608)
0805 (2012)
0804 (2010)

56 80
75 120

10

22

5 10

22

5 10

22

75
75
47 60
75
60

22

47

47
47
33

5
10

75

1206 (3216)
0603 (1608)
0805 (2012)
0201 (0603)
0201 (0603)
0402 (1005)
0603 (1608)
0805 (2012)
1206 (3216)
1806 (4516)
0603 (1608)
0603 (1608)
1210 (3225)
0201 (0603)

120

600
470
1000
600
470
1000

220

120 220
33 (1.5A)
22 (1.8A)
80 (1A)
33 (0.75A)
22 (0.9A)
33 (3A) 80 (1.5A/2.3A)180 (1.5A) 220 (1.4A) 470 (1A)
10 (1A)
30 (2.2A) 60 (1.7A/2.5A) 120 (1.3A/2A) 330 (1.2A) 600 (0.9A)
33 (3A)
120 (2A) 220 (1.4A) 470 (1A)
30 (1A) 60 (0.5A) 180 (1.5A) 330 (1.2A)
30 (4A)
220 (2A)
22 (6A)
60 (3.5A) 120 (3A) 330 (1.5A)
50 (3.5A)
390 (2A)
33 (6A)
120 (3.5A)
600 (1.5A)
75 (3.5A)
470 (2A)
60 (6A) 180 (3.5A)
1000 (1.5A)
220 (2.2A) 470 (1.5A)
30 (5A) 70 (3.5A)
26 (6A)
100 (3A) 120 (3A) 330 (1.7A) 600 (1.3A)
70 (4A)
220 (2.5A)
26 (6A)
120 (3A) 330 (1.5A)
30
25 (0.6A) 50 (0.4A)
220 (0.7A)
120 (1.5A)

0402 (1005)
0603 (1608)

600
240
470
600
1800
240
470
1000
120 220
420 600
1500 2200
140 220
330 470
120 150
1000 1800 2500
200 330 470 750 1500 2200 2700
120 150 220
420 600 1000 1800 2250
600
120 220
470
1000
600
470
1000
120 220

120 (2A) 330 (0.5A) 470 (0.5A)

100 (2A) 220 (2A/1A) 390 (0.5A) 600 (0.5A)
1000 (0.6A)
600 (0.8A) 1500 (0.5A)
1000
600 1200

0603 (1608)
0201 (0603)

600
330 470
1000

0201 (0603)
0201 (0603)

190

0402 (1005)

600 1000

0402 (1005)

600 1000 1800

120

0402 (1005)

220

0603 (1608)

600
470
1000

0603 (1608)

600
470
1000

0603 (1608)

120

220 330
600
330 470
1000

0603 (1608)
220

0402 (1005)
0402 (1005)
0603 (1608)

470

75
470

* The derating of rated current is required for some items according to the operating temperature on each product page.
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

10

10kHz 100kHz 1MHz 10MHz 100MHz 1GHz 10GHz

Product Guide

NFp
Capacitor Type

Signal Lines Type

NFM15CC
NFM18CC
NFM21CC
NFM3DCC
NFM41CC
NFA31CC

p134

p135

p136

p137

p138

p139

(4 circuits array)

NFM15PC

Power Lines Type

NFM18PS
NFM18PC
NFM21PS
NFM21PC
NFM3DPC*
NFM31PC
NFM31KC*

Universal
Type
[ Power
Lines /
Signal
Lines ]

NFM41PC
NFE31PT
NFE61PT

p123

p125

p126

p128

p129

p130

p131

p132

p133

p121

p122

NFp
LC(RC) Combined Type

NFL18ST

Signal Lines Type

NFL18SP
NFL21SP

p140

p141

p143

p144

NFA18SL

p145

NFA18SD

p147

NFA21SL

p148

(4 circuits array)
(4 circuits array)
(4 circuits array)

NFW31SP
NFR21GD
NFA31GD

(4 circuits array)

p150

p152

p153

1000p

10000p

2200
22 47

0805 (2012)

22 47

1205 (3212)

22 47

1806 (4516)

22 47

1206 (3216)

22 47

(Applicable Frequency Ranges are only for reference.)

0.1

22000
22000
22000
22000
47000 0.22 1.0
0.47
4.3
0.1
1.0
0.47
0.22 1.0
0.1
0.47
2.2

0603 (1608)
0603 (1608)

10

0805 (2012)
0.22 1.0
4.7
0.47
0.1
2.2

0805 (2012)
22000

1205 (3212)

27

1206 (3216)
10000 22000
0.1
15000

1206 (3216)

0.2

1806 (4516)

1.5

470 2200
1500
22 47 100 220
100 360 1000
33 68 180 680
4700

1206 (3216)
2706 (6816)

50

0603 (1608)

70

500

100
150

0603 (1608)
20

0603 (1608)

50
50

0603 (1608)
0805 (2012)

50
10

(Applicable Frequency Ranges are only for reference.)

100
150

10

Effective Frequency Range

Cut-off Frequency (MHz)

0402 (1005)

1206 (3216)

10kHz 100kHz 1MHz 10MHz 100MHz 1GHz 10GHz

22000

0402 (1005)

0805 (2012)

10

22000

470 2200
100 220 1000
470 2200
100 220 1000
470 2200
100 220 1000
470 2200
100 220 1000
470 2200
100 220 1000

Size Code
in inch (in mm) 10

Series

NFL15ST

100p

0402 (1005)
0603 (1608)

Effective Frequency Range

Capacitance (F)

Size Code
in inch (in mm) 10p

Series

20

50

200

300

10kHz 100kHz 1MHz 10MHz 100MHz 1GHz 10GHz

500

200

300

500

200

300

500

500
200 300 400
400
200
130 180 220 300 350 480
200
180
280 310
80
200 300 330
400
100 150 200 300
500

70

100 150

0805 (2012)
1206 (3216)

* The derating of rated current is required for some items according to the operating temperature on each product page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

11

Product Guide

DL p

For Audio
Lines

Common Mode Choke Coils

DLM11G

DLP0QSN
DLP0QSA
DLP0NSC
DLP0NSN

Signal Lines Type

For Ultra High Speed Signal Lines

DLP0NSA
DLP11SN
DLP11SA
DLP11RN
DLP11RB
DLP11TB
DLP31S

p185

p186

p186

p187

p187

p187

p189

p189

p190

p190

p191

p192

DLP1NDN

p193

DLP2ADA

p194

DLP2ADN

p194

DLP31DN

p196

(2 circuits array)
(2 circuits array)

(2 circuits array)

DLW21S
DLW21H
DLW31SN

Universal
Type
[ Power
Lines /
Signal
Lines ]

DLW43SH

p197

p199

p200

p201

p177

DLW5AH / DLW5BS*
p179

DLW5AT*/DLW5BT*

PL p

Large
Current
Type
for Automotive
Available

BNX022*
SMD Type

100kHz 1MHz 10MHz 100MHz 1GHz

BNX023*
BNX024*
BNX025*
BNX002
BNX003
BNX005
BNX012*
BNX016*

45 90

0504 (1210)

60

025020 (0605)
15
025020 (0605)
7 35
03025 (0806)

28

03025 (0806)

35

90
120

67

15
03025 (0806)
7

0504 (1210)
0504 (1210)

240
200 280 330

67

0504 (1210)

90 120 160
35

90
67

45

0504 (1210) 15 40
80

0504 (1210)

120

1206 (3216)
05025 (1506)
0804 (2010)
0804 (2010)

35

0805 (2012)

550

67
35

90
67
240
200 280

90
120 160

67
90

1206 (3216)
0805 (2012)

220

90

200

130

320

440

90
67

120

180

260

370

490
500

90
120

67
90

1206 (3216)

180
160

260

600

1000

2200

1812 (4532)
2014 2020
(5036) (5050)
2014 2020
(5036) (5050)

190
50

110
100 150

230
250

500
350
600
330
500
400

1500 4000
1000
3000
1000 1400
850 1100 2700

800

Common Mode Impedance () at 10MHz

100

500

1000

500

900
1000

Effective Frequency Range

(Applicable Frequency Ranges are only for reference.)

100kHz 1MHz 10MHz 100MHz 1GHz 10GHz

p221

p221

p221

p221

p223

p223

p223

p224

p224

45

400
100

Height
(mm)

Rated Voltage
(Vdc)

Rated Current
(A)

3.1

50

10

3.1

100

15

3.5

50

15

3.5

25

15

13 max.

50

10

13 max.

150

10

13.5 max.

50

15

8.5 max.

50

15

8.5 max.

25

15

Effective Frequency Range

(Applicable Frequency Ranges are only for reference.)

* The derating of rated current is required for some items according to the operating temperature on each product page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

12

10GHz

p202

PLT10HH*

Series

Lead Type

Effective Frequency Range

(Applicable Frequency Ranges are only for reference.)

1000
600

Size Code
in inch (in mm)

Series

BNX
Power Lines Type

500

0504 (1210)

(2 circuits array)

Block EMIFILr

100

p184

DLM11S

Large Current Common Mode Choke Coil

for Automotive Available

Common Mode Impedance () at 100MHz

Size Code
in inch (in mm)

Series

10kHz 100kHz 1MHz 10MHz 100MHz 1GHz 10GHz

Chip Ferrite Bead

BL

Series Introduction

14

Part Numbering

16

Series Line Up

18

Product Detail

24

!Caution/Notice

99
100

Packaging

104

Design Kits

105

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Soldering and Mounting

Chip EMIFILr

Chip Ferrite Bead

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

BL p

Series Introduction

sExample of Chip Ferrite Bead BLM Series Structure

Inner Electrode

Chip Ferrite Bead

Outer Electrode
Ferrite Sheet
Through Hole

Chip EMIFILr

Cross Section

Up Classification of
sLine
Chip Ferrite Bead

Meets High-GHz
Band Noise

1600

High-GHz Band

Impedance ()

Chip Common Mode Choke Coil

1400

BLM_G Series

1200
1000
800
600
400

High

s'!FORHIGHSPEEDSIGNALLINES
s''FORGENERALSIGNALLINES

200
0
1

10

100

1000

Frequency (MHz)

BLM_H Series
GHz Band
Block Type EMIFILr

Noise
Frequency Band

BLM_E Series

s("($(%FORHIGHSPEEDSIGNALLINES
s('(+FORGENERALSIGNALLINES

s%'FORGENERALSIGNALLINES
s%"FORGENERALSIGNALLINESFORPOWERLINES

BLM standard line up

BLE/BLM_P/BLM_K Series
(for Power Lines)

s2+FORDIGITALINTERFACES
s!'FORGENERALSIGNALLINES
s"pFORHIGHSPEEDSIGNALLINES

s!8 FORGENERALSIGNALLINESPOWERLINES

Low

Microwave Absorber

s",-?0+,ARGECURRENTAVAILABLEUPTO!
s",%,ARGECURRENTAVAILABLEUPTO!

Small

Rated Current

(Less than 1A)

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

14

Large
(1A and more)

10000

BLp Series Introduction

sDifference between BLM A type and B type (HG type vs HD/HB/HE type)
cComparison of Resistance Element

cComparison of Impedance Curve

1200

1200

600

900
R ()

BLM18AG601SN1

300

600

BLM18AG601SN1

300
1

10

100

1000

Frequency (MHz)

10

100

1000

Chip EMIFILr

Z ()

BLM18BD601SN1

BLM18BD601SN1

900

Chip Ferrite Bead

A type: Impedance curve rises from low frequency range. Suppresses noise in a wide frequency range.
B type: Impedance curve rises sharply. Less damage to signal waveforms.

Frequency (MHz)

cComparison of Test Effect (25MHz)

29.7cm

1cm
Ferrite Bead

7cm

25MHz
OSC
74HC04

Waveform test point

Chip Common Mode Choke Coil

Test Circuit

74HC04

Pattern width 0.15cm

Line impedance 127

74HC00

Both side glass epoxy PCB(4.7)

All of back side is GND PCB thickness=0.6mm

BLM_B Series has less damage to high speed signal waveform.

BLM18AG601SN1

BLM18BD601SN1 Small Distortion

Spectrum has been reduced from low

frequency range.

Noise frequency has been reduced without

reducing signals of low frequency.

Block Type EMIFILr

No filter

Waveform

Microwave Absorber

Spectrum

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

15

BL p
(Part Number)

Part Numbering

Chip Ferrite Bead

BL

18

AG

102

1 D

y u i o
tImpedance
Expressed by three figures. The unit is in ohm () at 100MHz. The
first and second figures are significant digits, and the third figure
expresses the number of zeros that follow the two figures.

qProduct ID
Product ID

Chip Ferrite Bead

BL

Chip Ferrite Beads

yElectrode

wType

Expressed by a letter.

Code

Type

Array Type

Code

Electrode

DC Bias Characteristics Improved Type

S/T

Sn Plating

Ferrite Bead Single Type

Au Plating

Ex.)

Chip Common Mode Choke Coil

Chip EMIFILr

eDimensions (LgW)

uCategory

Code

Dimensions (LgW)

EIA

Code

Category

02

0.4g0.2mm

01005

Standard Type

03

0.6g0.3mm

0201

15

1.0g0.5mm

0402

18

1.6g0.8mm

0603

Code

2A

2.0g1.0mm

0804

1 Circuit

21

2.0g1.25mm

0805

4 Circuits

31

3.2g1.6mm

1206

32

3.2g2.5mm

1210

41

4.5g1.6mm

1806

iNumber of Circuits
Number of Circuits

rCharacteristics/Applications
Code *1

Characteristics/Applications

AG
AX

For General Use

TG

BLM18
BLM15/18

BC

BLM03/15/18/21, BLA2A
For High-speed Signal Lines

BLM03/15

BD

BLM03/15/18/21, BLA2A/31

BX

BLM02/15

PD

BLM15

PG

Block Type EMIFILr

BLM02/03/15

BA
BB

PN

For Power Lines

PX
KG
SG

BLM03/15/18/21/31/41
BLE32
BLM03/15

For Power Lines (Low DC Resistance Type)

BLM18
BLM18/21

RK

For Digital Interface

HG

For GHz Band General Use

EB

For GHz Band High-speed Signal Lines (Low Direct Current Type)

BLM03

EG

For GHz Band General Use (Low DC Resistance Type)

BLM15/18

HB
HD

Microwave Absorber

Series
BLM03/15/18/21, BLA2A/31

BLM03/15/18

BLM03/15/18
For GHz Band High-speed Signal Lines

HE

BLM03/15/18
BLM18

HK

For GHz Band Digital Interface

BLM18

GA

For High-GHz Band High-speed Signal Lines

BLM15

GG

For High-GHz Band General Use

BLM15/18

*1 Frequency characteristics vary with each code.

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

16

BLp Chip Ferrite Bead Part Numbering

oPackaging
Packaging

Embossed Taping (330mm Reel)

Embossed Taping (180mm Reel)

Series
BLE, BLM21 *1/31/41

Bulk

Paper Taping (330mm Reel)

BLM03/15/18 *3/21 *2, BLA2A/31

Paper Taping (180mm Reel)

BLM02/03/15/18/21 *2, BLA2A/31

All Series

Chip Ferrite Bead

Code

*1

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Chip EMIFILr

BLM21BD222SN1/BLM21BD272SN1 only.
*2 Except for BLM21BD222SN1/BLM21BD272SN1
*3 Except for BLM18T

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

17

BL p
Size
Code Thickness
in inch
(in mm) (mm)

Chip EMIFILr

Chip Ferrite Bead

01005
(0402)

Block Type EMIFILr

Chip Common Mode Choke Coil

0201
(0603)

Microwave Absorber

0402
(1005)

0.2
0.2
0.2
0.2
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5

Series Line Up

Chip Ferrite Bead

Type

Part Number
p24

Universal Type
[Power lines/Signal lines]
For High Speed Signal Lines

p26
p32

For General Signal Lines

p30

Universal Type
[Power lines/Signal lines]

p34

For High Speed Signal Lines

(Sharp Impedance Curve)

p27

For Power Lines

p28

p85

For General
Signal Lines

For GHz
Band Noise

Universal Type p87

[Power lines/Signal lines]
p85

For High Speed

Signal Lines

p42

For General Signal Lines

p40

Universal Type
[Power lines/Signal lines]

BLM02AX100SN1
BLM02AX700SN1
BLM02AX121SN1
BLM02BX151SN1
BLM03AG100SN1
BLM03AG700SN1
BLM03AG800SN1
BLM03AG121SN1
BLM03AG241SN1
BLM03AG601SN1
BLM03AG102SN1
BLM03AX100SN1
BLM03AX800SN1
BLM03AX121SN1
BLM03AX241SN1
BLM03AX601SN1
BLM03AX102SN1
BLM03BD750SN1
BLM03BD121SN1
BLM03BD241SN1
BLM03BD471SN1
BLM03BD601SN1
BLM03BB100SN1
BLM03BB220SN1
BLM03BB470SN1
BLM03BB750SN1
BLM03BB121SN1
BLM03BC330SN1
BLM03BC560SN1
BLM03BC800SN1
BLM03PG220SN1
BLM03PG330SN1
BLM03PX220SN1
BLM03PX330SN1
BLM03PX800SN1
BLM03HG601SN1
BLM03HG102SN1
BLM03HG122SN1
BLM03EB250SN1
BLM03EB500SN1
BLM03HD331SN1
BLM03HD471SN1
BLM03HD601SN1
BLM03HD102SN1
BLM03HB191SN1
BLM15AG100SN1
BLM15AG700SN1
BLM15AG121SN1
BLM15AG221SN1
BLM15AG601SN1
BLM15AG102SN1
BLM15AX100SN1
BLM15AX300SN1
BLM15AX700SN1
BLM15AX121SN1
BLM15AX221SN1
BLM15AX601SN1
BLM15AX102SN1

Impedance
at 100MHz/20C
at 1GHz/20C
10ohm5ohm
70ohm25%
120ohm25%
150ohm25%
10ohm(Typ.)
70ohm(Typ.)
80ohm25%
120ohm25%
240ohm25%
600ohm25%
1000ohm25%
10ohm(Typ.)
80ohm25%
120ohm25%
240ohm25%
600ohm25%
1000ohm25%
75ohm25%
120ohm25%
240ohm25%
470ohm25%
600ohm25%
10ohm25%
22ohm25%
47ohm25%
75ohm25%
120ohm25%
33ohm25%
56ohm25%
80ohm25%
22ohm25%
33ohm25%
22ohm25%
33ohm25%
80ohm25%
600ohm25%
1000ohm40%
1000ohm25%
1800ohm40%
1200ohm25%
2000ohm40%
25ohm25%
105ohm40%
50ohm25%
255ohm40%
750ohm40%
330ohm25%
1000ohm40%
470ohm25%
1500ohm40%
600ohm25%
2300ohm40%
1000ohm25%
1150ohm40%
190ohm25%
10ohm(Typ.)
70ohm(Typ.)
120ohm25%
220ohm25%
600ohm25%
1000ohm25%
10ohm5ohm
30ohm25%
70ohm25%
120ohm25%
220ohm25%
600ohm25%
1000ohm25%

Rated
Current
750mA
300mA
250mA
200mA
500mA
200mA
200mA
200mA
200mA
100mA
100mA
1000mA
500mA
450mA
350mA
250mA
200mA
300mA
250mA
200mA
215mA
200mA
300mA
200mA
200mA
200mA
100mA
150mA
100mA
100mA
900mA
750mA
1800mA
1500mA
1000mA
150mA
125mA
100mA
600mA
400mA
200mA
175mA
150mA
120mA
150mA
1000mA
600mA
550mA
450mA
300mA
300mA
1740mA
1100mA
780mA
700mA
600mA
500mA
350mA
Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

18

BLp Chip Ferrite Bead Series Line Up

Chip Ferrite Bead

BLM15BX750SN1
BLM15BX121SN1
BLM15BX221SN1
BLM15BX471SN1
BLM15BX601SN1
BLM15BX102SN1
BLM15BX182SN1
p46
BLM15BD750SN1
BLM15BD121SN1
BLM15BD221SN1
BLM15BD471SN1
BLM15BD601SN1
BLM15BD102SN1
BLM15BD182SN1
For High Speed Signal Lines
BLM15BB050SN1
(Sharp Impedance Curve)
BLM15BB100SN1
BLM15BB220SN1
BLM15BB470SN1
BLM15BB750SN1
BLM15BB121SN1
BLM15BB221SN1
BLM15BC121SN1
BLM15BC241SN1
BLM15BA050SN1
BLM15BA100SN1
BLM15BA220SN1
BLM15BA330SN1
BLM15BA470SN1
BLM15BA750SN1
p36
BLM15PX330SN1
BLM15PX600SN1
BLM15PX800SN1
BLM15PX121SN1
BLM15PX181SN1
BLM15PX221SN1
BLM15PX331SN1
For Power Lines
BLM15PX471SN1
BLM15PX601SN1
p38
BLM15PG100SN1
BLM15PD300SN1
BLM15PD600SN1
BLM15PD800SN1
BLM15PD121SN1
p88
BLM15HG601SN1
For General Signal Lines BLM15HG102SN1
p88
BLM15HD601SN1
BLM15HD102SN1
For High Speed
For GHz
Signal Lines
BLM15HD182SN1
Band Noise (Sharp Impedance Curve) BLM15HB121SN1
BLM15HB221SN1
p90
BLM15EG121SN1
Universal Type
[Power Lines/Signal Lines] BLM15EG221SN1
p91
BLM15GG221SN1
For High-GHz For General Signal Lines
BLM15GG471SN1
Band Noise
For High Speed Signal Lines p91 BLM15GA750SN1

Rated
Current
600mA
600mA
450mA
350mA
350mA
300mA
250mA
300mA
300mA
300mA
200mA
200mA
200mA
100mA
500mA
300mA
300mA
300mA
300mA
300mA
200mA
350mA
250mA
300mA
300mA
300mA
300mA
200mA
200mA
3000mA
2500mA
2300mA
2000mA
1500mA
1400mA
1200mA
1000mA
900mA
1000mA
2200mA
1700mA
1500mA
1300mA
300mA
250mA
300mA
250mA
200mA
300mA
250mA
1500mA
700mA
300mA
200mA
200mA

Chip EMIFILr

p44

Impedance
at 100MHz/20C
at 1GHz/20C
75ohm25%
120ohm25%
220ohm25%
470ohm25%
600ohm25%
1000ohm25%
1800ohm25%
75ohm25%
120ohm25%
220ohm25%
470ohm25%
600ohm25%
1000ohm25%
1800ohm25%
5ohm25%
10ohm25%
22ohm25%
47ohm25%
75ohm25%
120ohm25%
220ohm25%
120ohm25%
240ohm25%
5ohm25%
10ohm25%
22ohm25%
33ohm25%
47ohm25%
75ohm25%
33ohm25%
60ohm25%
80ohm25%
120ohm25%
180ohm25%
220ohm25%
330ohm25%
470ohm25%
600ohm25%
10ohm(Typ.)
30ohm25%
60ohm25%
80ohm25%
120ohm25%
600ohm25%
1000ohm40%
1000ohm25%
1400ohm40%
600ohm25%
1400ohm40%
1000ohm25%
2000ohm40%
1800ohm25%
2700ohm40%
120ohm25%
500ohm40%
220ohm25%
900ohm40%
120ohm25%
145ohm(Typ.)
220ohm25%
270ohm(Typ.)
220ohm25%
600ohm40%
470ohm25%
1200ohm40%
75ohm25%
1000ohm40%

Chip Common Mode Choke Coil

Part Number

Block Type EMIFILr

0402
(1005)

0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5

Type

Microwave Absorber

Size
Code Thickness
in inch
(in mm) (mm)

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

19

BLp Chip Ferrite Bead Series Line Up

Chip EMIFILr

Chip Ferrite Bead

Size
Code Thickness
in inch
(in mm) (mm)

Block Type EMIFILr

Chip Common Mode Choke Coil

0603
(1608)

0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8

Part Number

Type
p56

For General Signal Lines

p62

p58

For High Speed Signal Lines

(Sharp Impedance Curve)

p63

For Digital Interface Lines

BLM18AG121SN1
BLM18AG151SN1
BLM18AG221SN1
BLM18AG331SN1
BLM18AG471SN1
BLM18AG601SN1
BLM18AG102SN1
BLM18TG121TN1
BLM18TG221TN1
BLM18TG601TN1
BLM18TG102TN1
BLM18BD470SN1
BLM18BD121SN1
BLM18BD151SN1
BLM18BD221SN1
BLM18BD331SN1
BLM18BD421SN1
BLM18BD471SN1
BLM18BD601SN1
BLM18BD102SN1
BLM18BD152SN1
BLM18BD182SN1
BLM18BD222SN1
BLM18BD252SN1
BLM18BB050SN1
BLM18BB100SN1
BLM18BB220SN1
BLM18BB470SN1
BLM18BB600SN1
BLM18BB750SN1
BLM18BB121SN1
BLM18BB141SN1
BLM18BB151SN1
BLM18BB221SN1
BLM18BB331SN1
BLM18BB471SN1
BLM18BA050SN1
BLM18BA100SN1
BLM18BA220SN1
BLM18BA470SN1
BLM18BA750SN1
BLM18BA121SN1
BLM18RK121SN1
BLM18RK221SN1
BLM18RK471SN1
BLM18RK601SN1
BLM18RK102SN1

Impedance
at 100MHz/20C
at 1GHz/20C
120ohm25%
150ohm25%
220ohm25%
330ohm25%
470ohm25%
600ohm25%
1000ohm25%
120ohm25%
220ohm25%
600ohm25%
1000ohm25%
47ohm25%
120ohm25%
150ohm25%
220ohm25%
330ohm25%
420ohm25%
470ohm25%
600ohm25%
1000ohm25%
1500ohm25%
1800ohm25%
2200ohm25%
2500ohm25%
5ohm25%
10ohm25%
22ohm25%
47ohm25%
60ohm25%
75ohm25%
120ohm25%
140ohm25%
150ohm25%
220ohm25%
330ohm25%
470ohm25%
5ohm25%
10ohm25%
22ohm25%
47ohm25%
75ohm25%
120ohm25%
120ohm25%
220ohm25%
470ohm25%
600ohm25%
1000ohm25%

Rated
Current
500mA
500mA
500mA
500mA
500mA
500mA
400mA
200mA
200mA
200mA
100mA
500mA
200mA
200mA
200mA
200mA
200mA
200mA
200mA
100mA
50mA
50mA
50mA
50mA
700mA
700mA
600mA
550mA
550mA
500mA
500mA
450mA
450mA
450mA
400mA
300mA
500mA
500mA
500mA
300mA
300mA
200mA
200mA
200mA
200mA
200mA
200mA

Microwave Absorber

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

20

BLp Chip Ferrite Bead Series Line Up

For Power
Lines

Low DC Resistance
Type
p54

p92

For General Signal

Lines
p92

For High Speed

Signal Lines
(Sharp Impedance
Curve)

For GHz
Band Noise

p92

For Digital Interface

Lines
p96

Universal Type
[Power lines/
Signal lines]

For High-GHz Band Noise

p98
p68

For General Signal Lines

Chip Ferrite Bead

p52

Chip EMIFILr

Standard Type

BLM18PG300SN1
BLM18PG330SN1
BLM18PG600SN1
BLM18PG121SN1
BLM18PG181SN1
BLM18PG221SN1
BLM18PG331SN1
BLM18PG471SN1
BLM18KG260TN1
BLM18KG300TN1
BLM18KG700TN1
BLM18KG101TN1
BLM18KG121TN1
BLM18KG221SN1
BLM18KG331SN1
BLM18KG471SN1
BLM18KG601SN1
BLM18SG260TN1
BLM18SG700TN1
BLM18SG121TN1
BLM18SG221TN1
BLM18SG331TN1
BLM18HG471SN1
BLM18HG601SN1
BLM18HG102SN1
BLM18HE601SN1
BLM18HE102SN1
BLM18HE152SN1
BLM18HD471SN1
BLM18HD601SN1
BLM18HD102SN1
BLM18HB121SN1
BLM18HB221SN1
BLM18HB331SN1
BLM18HK331SN1
BLM18HK471SN1
BLM18HK601SN1
BLM18HK102SN1
BLM18EG101TN1
BLM18EG121SN1
BLM18EG221SN1
BLM18EG221TN1
BLM18EG331TN1
BLM18EG391TN1
BLM18EG471SN1
BLM18EG601SN1
BLM18GG471SN1
BLM21AG121SN1
BLM21AG151SN1
BLM21AG221SN1
BLM21AG331SN1
BLM21AG471SN1
BLM21AG601SN1
BLM21AG102SN1

Rated
Current
1000mA
3000mA
500mA
2000mA
1500mA
1400mA
1200mA
1000mA
6000mA
5000mA
3500mA
3000mA
3000mA
2200mA
1700mA
1500mA
1300mA
6000mA
4000mA
3000mA
2500mA
1500mA
200mA
200mA
100mA
800mA
600mA
500mA
100mA
100mA
50mA
200mA
100mA
50mA
200mA
200mA
100mA
50mA
2000mA
2000mA
2000mA
1000mA
500mA
500mA
500mA
500mA
200mA
800mA
800mA
800mA
700mA
700mA
600mA
500mA

Chip Common Mode Choke Coil

p50

Impedance
at 100MHz/20C
at 1GHz/20C
30ohm(Typ.)
33ohm25%
60ohm(Typ.)
120ohm25%
180ohm25%
220ohm25%
330ohm25%
470ohm25%
26ohm25%
30ohm25%
70ohm25%
100ohm25%
120ohm25%
220ohm25%
330ohm25%
470ohm25%
600ohm25%
26ohm25%
70ohm25%
120ohm25%
220ohm25%
330ohm25%
470ohm25%
600ohm(Typ.)
600ohm25%
700ohm(Typ.)
1000ohm25%
1000ohm(Typ.)
600ohm25%
600ohm(Typ.)
1000ohm25%
1000ohm(Typ.)
1500ohm25%
1500ohm(Typ.)
470ohm25%
1000ohm(Typ.)
600ohm25%
1200ohm(Typ.)
1000ohm25%
1700ohm(Typ.)
120ohm25%
500ohm40%
220ohm25%
1100ohm40%
330ohm25%
1600ohm40%
330ohm25%
400ohm40%
470ohm25%
600ohm40%
600ohm25%
700ohm40%
1000ohm25%
1200ohm40%
100ohm25%
140ohm(Typ.)
120ohm25%
145ohm(Typ.)
220ohm25%
260ohm(Typ.)
220ohm25%
300ohm(Typ.)
330ohm25%
450ohm(Typ.)
390ohm25%
520ohm(Typ.)
470ohm25%
550ohm(Typ.)
600ohm25%
700ohm(Typ.)
470ohm25%
1800ohm30%
120ohm25%
150ohm25%
220ohm25%
330ohm25%
470ohm25%
600ohm25%
1000ohm25%

Block Type EMIFILr

0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.5
0.5
0.5
0.5
0.5
0.8
0603
0.8
(1608)
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.5
0.8
0.8
0.5
0.5
0.5
0.8
0.8
0.8
0.85
0.85
0.85
0805
0.85
(2012)
0.85
0.85
0.85

Part Number

Type

Microwave Absorber

Size
Code Thickness
in inch
(in mm) (mm)

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

21

BLp Chip Ferrite Bead Series Line Up

Block Type EMIFILr

Chip Common Mode Choke Coil

Chip EMIFILr

Chip Ferrite Bead

Size
Code Thickness
in inch
(in mm) (mm)

0805
(2012)

1206
(3216)

1806
(4516)
1210
(3225)

Microwave Absorber

0804
(2010)

0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
1.25
1.25
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
1.1
1.1
1.1
1.1
1.1
1.6
1.6
1.6
1.6
1.6
0.2
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5

Part Number

Type
p70

For High Speed Signal Lines

(Sharp Impedance Curve)

p73

For Digital Interface Lines

p66

For Power Lines

p75

For Power Lines

p77

For Power Lines

For Power Lines

p79
p80

For General Signal Lines

p80

For High Speed Signal Lines

BLM21BD121SN1
BLM21BD151SN1
BLM21BD221SN1
BLM21BD331SN1
BLM21BD421SN1
BLM21BD471SN1
BLM21BD601SN1
BLM21BD751SN1
BLM21BD102SN1
BLM21BD152SN1
BLM21BD182SN1
BLM21BD222TN1
BLM21BD222SN1
BLM21BD272SN1
BLM21BB050SN1
BLM21BB600SN1
BLM21BB750SN1
BLM21BB121SN1
BLM21BB151SN1
BLM21BB201SN1
BLM21BB221SN1
BLM21BB331SN1
BLM21BB471SN1
BLM21RK121SN1
BLM21RK221SN1
BLM21RK471SN1
BLM21RK601SN1
BLM21RK102SN1
BLM21PG220SN1
BLM21PG300SN1
BLM21PG600SN1
BLM21PG121SN1
BLM21PG221SN1
BLM21PG331SN1
BLM31PG330SN1
BLM31PG500SN1
BLM31PG121SN1
BLM31PG391SN1
BLM31PG601SN1
BLM41PG600SN1
BLM41PG750SN1
BLM41PG181SN1
BLM41PG471SN1
BLM41PG102SN1
BLE32PN300SN1
BLA2AAG121SN4
BLA2AAG221SN4
BLA2AAG601SN4
BLA2AAG102SN4
BLA2ABD750SN4
BLA2ABD121SN4
BLA2ABD221SN4
BLA2ABD471SN4
BLA2ABD601SN4
BLA2ABD102SN4
BLA2ABB100SN4
BLA2ABB220SN4
BLA2ABB470SN4
BLA2ABB121SN4
BLA2ABB221SN4

Impedance
at 100MHz/20C
at 1GHz/20C
120ohm25%
150ohm25%
220ohm25%
330ohm25%
420ohm25%
470ohm25%
600ohm25%
750ohm25%
1000ohm25%
1500ohm25%
1800ohm25%
2200ohm25%
2250ohm(Typ.)
2700ohm25%
5ohm25%
60ohm25%
75ohm25%
120ohm25%
150ohm25%
200ohm25%
220ohm25%
330ohm25%
470ohm25%
120ohm25%
220ohm25%
470ohm25%
600ohm25%
1000ohm25%
22ohm25%
30ohm(Typ.)
60ohm25%
120ohm25%
220ohm25%
330ohm25%
33ohm25%
50ohm(Typ.)
120ohm25%
390ohm25%
600ohm25%
60ohm(Typ.)
75ohm(Typ.)
180ohm25%
470ohm25%
1000ohm25%
30ohm10ohm
120ohm25%
220ohm25%
600ohm25%
1000ohm25%
75ohm25%
120ohm25%
220ohm25%
470ohm25%
600ohm25%
1000ohm25%
10ohm25%
22ohm25%
47ohm25%
120ohm25%
220ohm25%

Rated
Current
200mA
200mA
200mA
200mA
200mA
200mA
200mA
200mA
200mA
200mA
200mA
200mA
200mA
200mA
1000mA
800mA
700mA
600mA
600mA
500mA
500mA
400mA
400mA
200mA
200mA
200mA
200mA
200mA
6000mA
4000mA
3500mA
3000mA
2000mA
1500mA
6000mA
3500mA
3500mA
2000mA
1500mA
6000mA
3500mA
3500mA
2000mA
1500mA
10000mA
100mA
50mA
50mA
50mA
200mA
200mA
100mA
100mA
100mA
50mA
200mA
200mA
200mA
50mA
50mA
Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

22

BLp Chip Ferrite Bead Series Line Up

p83

For General Signal Lines

p83

For High Speed Signal Lines

BLA31AG300SN4
BLA31AG600SN4
BLA31AG121SN4
BLA31AG221SN4
BLA31AG601SN4
BLA31AG102SN4
BLA31BD121SN4
BLA31BD221SN4
BLA31BD471SN4
BLA31BD601SN4
BLA31BD102SN4

Impedance
at 100MHz/20C
at 1GHz/20C
30ohm25%
60ohm25%
120ohm25%
220ohm25%
600ohm25%
1000ohm25%
120ohm25%
220ohm25%
470ohm25%
600ohm25%
1000ohm25%

Rated
Current
200mA
200mA
150mA
150mA
100mA
50mA
150mA
150mA
100mA
100mA
50mA

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Chip EMIFILr

1206
(3216)

0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8

Part Number

Type

Chip Ferrite Bead

Size
Code Thickness
in inch
(in mm) (mm)

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

23

BLM Series

Universal Type [Power Lines/Signal Lines] Chip Ferrite Bead

BLM02AX

BLM02AX

Series 01005/0402 (inch/mm)

High Spec Ferrite Bead ultra low DC resistance. For general signal lines.

Chip Ferrite Bead

01005/0402 (inch/mm)

c Dimensions

c Equivalent Circuit
0.20.02

0.20.02

0.40.02

(Resistance element becomes dominant

at high frequencies.)

0.10+0.04/0.03

c Packaging
Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

20000

Bulk(Bag)

1000

: Electrode
(in mm)

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

Part Number

Impedance
(at 100MHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLM02AX100SN1p

10ohm 5 ohm

750mA

0.07ohm max.

-55C to +125C

BLM02AX700SN1p

70ohm 25%

300mA

0.4ohm max.

-55C to +125C

BLM02AX121SN1p

120ohm 25%

250mA

0.5ohm max.

-55C to +125C

c Impedance-Frequency Characteristics
480

360
Impedance ()

Chip Common Mode Choke Coil

Number of Circuits: 1

BLM02AX121SN1
240

BLM02AX700SN1
BLM02AX100SN1

120

0
10

100
Frequency (MHz)

1000

3000

c Impedance-Frequency Characteristics
BLM02AX100SN1

BLM02AX700SN1

20

160

15

120

BLM02AX121SN1
240

10

100
Frequency (MHz)

80

1000

3000

160
Z
120
R
80
X

40

Impedance ()

Z
10

Microwave Absorber

Impedance ()

200
Impedance ()

Block Type EMIFILr

10

100
Frequency (MHz)

40

1000

3000

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

24

10

100
Frequency (MHz)

1000

3000

Feature

BLMppAX Series

Advantage

Chip Ferrite Bead

Excellent for Both Signal and Power Lines.

Multi Function Chip Ferrite Bead BLMppAX Series

Feature

Chip EMIFILr

a1/2 the DC resistance than conventional type utilizing the latest technology
New ferrite material
Optimum ferrite firing condition
Fine piling technology
Advanced coil pattern design technology
aImproved stability of performance at heat shock
aWide line-up from 10 to 1000ohm(@100MHz) useful for signal line

Advantage

Chip Common Mode Choke Coil

aHigh Rated Current

Good for miniaturization of high power equipment
aLower Voltage down at Ferrite bead
Good for Battery driven equipment by saving running voltage margin
aHigher Reliability

Drastically Reduced DC Resistance

DC Resistance Comparison
3.0

Block Type EMIFILr

New type (BLM03AX)

Conventional type (BLM03AG)

2.0

Drastically reduced

Test Result - Heat Shock

1.5
30

0.5

0.0
0

200

400

600

800

Impedance @100MHz ()

1000

1200

20

Conventional type (BLM15AG)

10

Microwave Absorber

1.0

Impedance Change (%)

DC Resistance ()

2.5

0
0

500

1000

New type (BLM15AX)

-10

Heat Shock Cycle (cycles)

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

25

BLM Series

Signal Lines Type Chip Ferrite Bead

BLM02BX

BLM02BX

Series 01005/0402 (inch/mm)

High Spec Ferrite Bead ultra low DC resistance. For high speed signal lines.

Chip Ferrite Bead

01005/0402 (inch/mm)

c Dimensions

c Equivalent Circuit
0.20.02

0.20.02

0.40.02

(Resistance element becomes dominant

at high frequencies.)

0.10+0.04/0.03

c Packaging
Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

20000

Bulk(Bag)

1000

: Electrode
(in mm)

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

Part Number

Impedance
(at 100MHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLM02BX151SN1p

150ohm 25%

200mA

0.7ohm max.

-55C to +125C

Number of Circuits: 1

c Impedance-Frequency Characteristics

300
Impedance ()

Chip Common Mode Choke Coil

400

BLM02BX151SN1
200

100

0
1

10

100
Frequency (MHz)

1000

3000

Block Type EMIFILr

c Impedance-Frequency Characteristics
BLM02BX151SN1
400

Impedance ()

300
Z
200

R
X

100

10

100
Frequency (MHz)

1000

3000

Microwave Absorber

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

26

BLM Series

Power Lines Type Chip Ferrite Bead

BLM03PG

BLM03PG

Series 0201/0603 (inch/mm)

0201 size for power lines.

*Please refer to the products designed for both power lines and signal lines.

c Equivalent Circuit
0.30.03

0.30.03

0.60.03

0201/0603 (inch/mm)
Chip Ferrite Bead

c Dimensions

(Resistance element becomes dominant

at high frequencies.)

0.150.05

c Packaging
Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

15000

330mm Reel Paper Tape

50000

Bulk(Bag)

1000

: Electrode
(in mm)

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

Part Number

Impedance
(at 100MHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLM03PG220SN1p

22ohm 25%

900mA

0.065ohm max.

-55C to +125C

BLM03PG330SN1p

33ohm 25%

750mA

0.090ohm max.

-55C to +125C

Number of Circuits: 1

Chip Common Mode Choke Coil

c Impedance-Frequency Characteristics
80

Impedance ()

60

BLM03PG330SN1

40
BLM03PG220SN1

20

0
1

10

100
Frequency (MHz)

1000

3000

BLM03PG220SN1

BLM03PG330SN1

40

80

30

60
Impedance ()

Impedance ()

Block Type EMIFILr

c Impedance-Frequency Characteristics

Z
R

20

10

40

R
20
X

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

Microwave Absorber

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

27

BLM Series

Power Lines Type Chip Ferrite Bead

BLM03PX

BLM03PX

Series 0201/0603 (inch/mm)

Improved DC resistance meets larger current.

c Dimensions

c Equivalent Circuit
0.30.03

0.30.03

Chip Ferrite Bead

0201/0603 (inch/mm)

0.60.03

(Resistance element becomes dominant

at high frequencies.)

0.150.05

c Packaging
Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

15000

330mm Reel Paper Tape

50000

Bulk(Bag)

1000

: Electrode
(in mm)

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

Part Number

Impedance
(at 100MHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLM03PX220SN1p

22ohm 25%

1800mA

0.040ohm max.

-55C to +125C

BLM03PX330SN1p

33ohm 25%

1500mA

0.055ohm max.

-55C to +125C

BLM03PX800SN1p

80ohm 25%

1000mA

0.130ohm max.

-55C to +125C

c Impedance-Frequency Characteristics
160

c Notice (Rating)
In operating temperature exceeding +85C
derating of current is necessary for
BLM03PX_SN1 series.
Please apply the derating curve shown in
chart according to the operating
temperature.

120
Impedance ()

Chip Common Mode Choke Coil

Number of Circuits: 1

BLM03PX800SN1
80
BLM03PX330SN1

Derating of Rated Current

BLM03PX220SN1

2.00

40

1.80

Block Type EMIFILr

10

100
Frequency (MHz)

1000

BLM03PX220SN1

3000

BLM03PX330SN1

Rated Current (A)

1.50

1.45

1.20

1.00

BLM03PX800SN1

Microwave Absorber

0.80

0.60
0

85

125

145

Operating Temperature (C)

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

28

BLM Series
Power Lines Type Chip Ferrite Bead
BLM03PX Series 0201/0603 (inch/mm)

BLM03PX

c Impedance-Frequency Characteristics
BLM03PX330SN1

40

160

45
Z
R

20
X
10

120
Impedance ()

Impedance ()

Impedance ()

30

Z
30

R
X

15

10

100
Frequency (MHz)

1000

3000

Z
80

R
X

40

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Chip EMIFILr

BLM03PX800SN1

60

0201/0603 (inch/mm)
Chip Ferrite Bead

BLM03PX220SN1

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

29

BLM Series

Universal Type [Power Lines/Signal Lines] Chip Ferrite Bead

BLM03AX

BLM03AX

Series 0201/0603 (inch/mm)

High Spec Ferrite Bead Ultra low DC resistance and wide impedance line up. Fit for both power lines and signal lines.
c Dimensions

c Equivalent Circuit
0.30.03

0.30.03

Chip Ferrite Bead

0201/0603 (inch/mm)

0.60.03

(Resistance element becomes dominant

at high frequencies.)

0.150.05

c Packaging
Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

15000

330mm Reel Paper Tape

50000

Bulk(Bag)

1000

: Electrode
(in mm)

Part Number

Impedance
(at 100MHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLM03AX100SN1p

10ohm (Typ.)

1000mA

0.05ohm max.

-55C to +125C

BLM03AX800SN1p

80ohm 25%

500mA

0.18ohm max.

-55C to +125C

BLM03AX121SN1p

120ohm 25%

450mA

0.23ohm max.

-55C to +125C

BLM03AX241SN1p

240ohm 25%

350mA

0.38ohm max.

-55C to +125C

BLM03AX601SN1p

600ohm 25%

250mA

0.85ohm max.

-55C to +125C

BLM03AX102SN1p

1000ohm 25%

200mA

1.25ohm max.

-55C to +125C

Number of Circuits: 1

c Impedance-Frequency Characteristics
1500
BLM03AX102SN1
1250

BLM03AX601SN1
BLM03AX241SN1

1000
Impedance ()

Chip Common Mode Choke Coil

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

BLM03AX121SN1
750

BLM03AX800SN1

500

0
1

10

100
Frequency (MHz)

1000

3000

c Impedance-Frequency Characteristics
BLM03AX100SN1

BLM03AX800SN1

16

Z
Impedance ()

Impedance ()

240

12

Microwave Absorber

BLM03AX121SN1

150

180
Impedance ()

Block Type EMIFILr

BLM03AX100SN1
250

100
R
X

50

Z
120
R
X
60

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

Continued on the following page.

!Note

30

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

BLM Series
Universal Type [Power Lines/Signal Lines] Chip Ferrite Bead
BLM03AX Series 0201/0603 (inch/mm)

BLM03AX

c Impedance-Frequency Characteristics
BLM03AX601SN1

400

240
R
160

Z
600
R
X

300

80

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

1000
R

500

10

100
Frequency (MHz)

1000

3000

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Chip EMIFILr

Impedance ()

900

Impedance ()

Impedance ()

1500
Z

320

BLM03AX102SN1

1200

0201/0603 (inch/mm)
Chip Ferrite Bead

BLM03AX241SN1

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

31

BLM Series

Signal Lines Type Chip Ferrite Bead

BLM03AG

BLM03AG

Series 0201/0603 (inch/mm)

0201 size for general signal lines.

c Dimensions

c Equivalent Circuit
0.30.03

0.30.03

Chip Ferrite Bead

0201/0603 (inch/mm)

0.60.03

(Resistance element becomes dominant

at high frequencies.)

0.150.05

c Packaging
Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

15000

330mm Reel Paper Tape

50000

Bulk(Bag)

1000

: Electrode
(in mm)

Part Number

Impedance
(at 100MHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLM03AG100SN1p

10ohm (Typ.)

500mA

0.1ohm max.

-55C to +125C

BLM03AG700SN1p

70ohm (Typ.)

200mA

0.4ohm max.

-55C to +125C

BLM03AG800SN1p

80ohm 25%

200mA

0.4ohm max.

-55C to +125C

BLM03AG121SN1p

120ohm 25%

200mA

0.5ohm max.

-55C to +125C

BLM03AG241SN1p

240ohm 25%

200mA

0.8ohm max.

-55C to +125C

BLM03AG601SN1p

600ohm 25%

100mA

1.5ohm max.

-55C to +125C

BLM03AG102SN1p

1000ohm 25%

100mA

2.5ohm max.

-55C to +125C

Number of Circuits: 1

c Impedance-Frequency Characteristics
1500
BLM03AG102SN1
1250

BLM03AG601SN1
BLM03AG241SN1

1000
Impedance ()

Chip Common Mode Choke Coil

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

BLM03AG121SN1
BLM03AG800SN1

750

BLM03AG700SN1
500

Block Type EMIFILr

BLM03AG100SN1
250

0
1

10

100
Frequency (MHz)

1000

3000

c Impedance-Frequency Characteristics
BLM03AG100SN1

BLM03AG700SN1

20

BLM03AG800SN1
160

120
100

10

120

80

Impedance ()

Impedance ()

Microwave Absorber

Impedance ()

15

60
40

Z
80
R
40

20

X
0

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

Continued on the following page.

!Note

32

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

BLM Series
Signal Lines Type Chip Ferrite Bead
BLM03AG Series 0201/0603 (inch/mm)

BLM03AG

c Impedance-Frequency Characteristics

Impedance ()

Impedance ()

160
120
R
80

1000

400

800

300

Z
R

200

X
40
0

100

10

100
Frequency (MHz)

1000

3000

1000

3000

BLM03AG601SN1

500

10

100
Frequency (MHz)

0201/0603 (inch/mm)
Chip Ferrite Bead

BLM03AG241SN1

200

Impedance ()

BLM03AG121SN1

600

400
X
200

1000

3000

10

100
Frequency (MHz)

1000

3000

BLM03AG102SN1
1500

Impedance ()

Chip EMIFILr

1200

R
900
600
X

300

10

100
Frequency (MHz)

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

33

BLM Series

Signal Lines Type Chip Ferrite Bead

BLM03B

BLM03B

Series 0201/0603 (inch/mm)

0201 size for high speed signal lines.

c Dimensions

c Equivalent Circuit
0.30.03

0.30.03

Chip Ferrite Bead

0201/0603 (inch/mm)

0.60.03

(Resistance element becomes dominant

at high frequencies.)

0.150.05

c Packaging
Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

15000

330mm Reel Paper Tape

50000

Bulk(Bag)

1000

: Electrode
(in mm)

Chip Common Mode Choke Coil

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

Part Number

Impedance
(at 100MHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLM03BD750SN1p

75ohm 25%

300mA

0.4ohm max.

-55C to +125C

BLM03BD121SN1p

120ohm 25%

250mA

0.5ohm max.

-55C to +125C

BLM03BD241SN1p

240ohm 25%

200mA

0.8ohm max.

-55C to +125C

BLM03BD471SN1p

470ohm 25%

215mA

1.5ohm max.

-55C to +125C

BLM03BD601SN1p

600ohm 25%

200mA

1.7ohm max.

-55C to +125C

BLM03BB100SN1p

10ohm 25%

300mA

0.4ohm max.

-55C to +125C

BLM03BB220SN1p

22ohm 25%

200mA

0.5ohm max.

-55C to +125C

BLM03BB470SN1p

47ohm 25%

200mA

0.7ohm max.

-55C to +125C

BLM03BB750SN1p

75ohm 25%

200mA

1.0ohm max.

-55C to +125C

BLM03BB121SN1p

120ohm 25%

100mA

1.5ohm max.

-55C to +125C

BLM03BC330SN1p

33ohm 25%

150mA

0.85ohm max.

-55C to +125C

BLM03BC560SN1p

56ohm 25%

100mA

1.05ohm max.

-55C to +125C

BLM03BC800SN1p

80ohm 25%

100mA

1.40ohm max.

-55C to +125C

Number of Circuits: 1

c Impedance-Frequency Characteristics
BLM03BB Series

1200

800

1000
600

BLM03BD601SN1
Impedance ()

800
Impedance ()

Block Type EMIFILr

BLM03BD Series

BLM03BD471SN1
600
BLM03BD241SN1
BLM03BD121SN1

400

BLM03BB121SN1
BLM03BB750SN1

400

BLM03BB470SN1
BLM03BB220SN1

200

BLM03BD750SN1

BLM03BB100SN1

200

Microwave Absorber

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

34

BLM Series
Signal Lines Type Chip Ferrite Bead
BLM03B Series 0201/0603 (inch/mm)

BLM03B

c Impedance-Frequency Characteristics

c Impedance-Frequency Characteristics

BLM03BC Series
1500

BLM03BD750SN1

BLM03BC800SN1

0201/0603 (inch/mm)
Chip Ferrite Bead

900
200
BLM03BC560SN1
600

150
Impedance ()

BLM03BC330SN1

100

R
50

0
100
Frequency (MHz)

1000

BLM03BD241SN1
500

240

400

180
Z
120

R
X

60

10

1000

BLM03BD601SN1

200

10

100
Frequency (MHz)

1000

100
Frequency (MHz)

1000

20

10

100
Frequency (MHz)

Impedance ()

10

100
Frequency (MHz)

1000

1000

BLM03BC330SN1

Impedance ()

Z
R

300
200

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

10

100
Frequency (MHz)

1000

3000

1000

3000

R
400
X

3000

10

100
Frequency (MHz)

BLM03BC800SN1
1500
1200
Z

600
R
400

200

900
R
600
X
300

200

100

600

800

400

1000

500

BLM03BB121SN1

BLM03BC560SN1

600

100
Frequency (MHz)

100

3000

300

3000

10

50

150

100

800

450

200

150

Impedance ()

3000

200

600

300

1000

400

3000

BLM03BB750SN1

400

3000

BLM03BB220SN1

40

3000

BLM03BB470SN1

Impedance ()

10

Impedance ()

Impedance ()

Impedance ()

400

60

600

1000

200

80

800

BLM03BB100SN1

1000

200

3000

100
Frequency (MHz)

600
Z

300

100

100
Frequency (MHz)

10

800

Impedance ()

BLM03BD471SN1

Impedance ()

300

Impedance ()

Impedance ()

BLM03BD121SN1

3000

Chip EMIFILr

10

Chip Common Mode Choke Coil

Impedance ()

Block Type EMIFILr

300

Microwave Absorber

Impedance ()

1200

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

35

BLM Series

Power Lines Type Chip Ferrite Bead

BLM15PX

BLM15PX

Series 0402/1005 (inch/mm)

3A max., high performance type for power lines up to 600ohm.

c Dimensions

c Equivalent Circuit

0.50.05

Chip Ferrite Bead

0402/1005 (inch/mm)

0.250.1

1.00.05

(Resistance element becomes dominant

at high frequencies.)

0.50.05

c Packaging
Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

10000

330mm Reel Paper Tape

50000

Bulk(Bag)

1000

: Electrode
(in mm)

Part Number

Impedance
(at 100MHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLM15PX330SN1p

33ohm 25%

3000mA

0.022ohm max.

-55C to +125C

BLM15PX600SN1p

60ohm 25%

2500mA

0.032ohm max.

-55C to +125C

BLM15PX800SN1p

80ohm 25%

2300mA

0.038ohm max.

-55C to +125C

BLM15PX121SN1p

120ohm 25%

2000mA

0.055ohm max.

-55C to +125C

BLM15PX181SN1p

180ohm 25%

1500mA

0.090ohm max.

-55C to +125C

BLM15PX221SN1p

220ohm 25%

1400mA

0.10ohm max.

-55C to +125C

BLM15PX331SN1p

330ohm 25%

1200mA

0.15ohm max.

-55C to +125C

BLM15PX471SN1p

470ohm 25%

1000mA

0.20ohm max.

-55C to +125C

BLM15PX601SN1p

600ohm 25%

900mA

0.23ohm max.

-55C to +125C

Number of Circuits: 1

c Impedance-Frequency Characteristics
800

In operating temperature exceeding +85C,

derating of current is necessary for
BLM15PX series.
Please apply the derating curve shown in
chart according to the operating
temperature.

BLM15PX601SN1
BLM15PX471SN1

600
Impedance ()

Block Type EMIFILr

BLM15PX331SN1
BLM15PX221SN1
BLM15PX181SN1
400

c Notice (Rating)

BLM15PX121SN1
BLM15PX800SN1
BLM15PX600SN1

Derating of Rated Current

BLM15PX330SN1
200

0
1

10

100
Frequency (MHz)

1000

3000

Rated Current (mA)

Chip Common Mode Choke Coil

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

3000
2500
2300
2000
1700
1500
1400

1400
1300

1200

1100

1000
900

Microwave Absorber

800
700
600
500

125
85
Operating Temperature (C)

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

36

BLM Series
Power Lines Type Chip Ferrite Bead
BLM15PX Series 0402/1005 (inch/mm)

BLM15PX

c Impedance-Frequency Characteristics

R
X

10

100
Frequency (MHz)

1000

3000

Z
90
R
60

10

100
Frequency (MHz)

1000

3000

R
80
X

180

120
60

10

100
Frequency (MHz)

1000

3000

BLM15PX331SN1

3000

1000

3000

1000

3000

140
X

70

10

100
Frequency (MHz)

1000

3000

BLM15PX471SN1

500

1000

210

40

100
Frequency (MHz)

280

Z
Impedance ()

Impedance ()

120

10

350

240

BLM15PX221SN1

300

160

30

BLM15PX181SN1

200

10

100
Frequency (MHz)

BLM15PX601SN1
800

600
500

400

Z
Impedance ()

600

300
200

Impedance ()

Impedance ()

40
20

BLM15PX121SN1

Impedance ()

15

400

300
200

100

Z
400

200

100

10

100
Frequency (MHz)

1000

3000

X
1

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

Microwave Absorber

Block Type EMIFILr

60

Chip EMIFILr

30

120
Z

Impedance ()

Impedance ()

Impedance ()

150

80

45

BLM15PX800SN1

100

0402/1005 (inch/mm)
Chip Ferrite Bead

BLM15PX600SN1

60

Chip Common Mode Choke Coil

BLM15PX330SN1

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

37

BLM Series

Power Lines Type Chip Ferrite Bead

BLM15PG/BLM15PD

BLM15PG/BLM15PD

Series 0402/1005 (inch/mm)

0402 size for power lines.

*Please refer to the products which are designed for both power lines and signal lines.

c Dimensions

c Equivalent Circuit

0.50.05

Chip Ferrite Bead

0402/1005 (inch/mm)

0.250.1

1.00.05

(Resistance element becomes dominant

at high frequencies.)

0.50.05

c Packaging
Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

10000

330mm Reel Paper Tape

50000

Bulk(Bag)

1000

: Electrode
(in mm)

Part Number

Impedance
(at 100MHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLM15PG100SN1p

10ohm (Typ.)

1000mA

0.025ohm max.

-55C to +125C

BLM15PD300SN1p

30ohm 25%

2200mA

0.035ohm max.

-55C to +125C

BLM15PD600SN1p

60ohm 25%

1700mA

0.06ohm max.

-55C to +125C

BLM15PD800SN1p

80ohm 25%

1500mA

0.07ohm max.

-55C to +125C

BLM15PD121SN1p

120ohm 25%

1300mA

0.09ohm max.

-55C to +125C

Number of Circuits: 1

c Impedance-Frequency Characteristics
200

BLM15PD800SN1
160
BLM15PD600SN1
BLM15PD300SN1

120

c Notice (Rating)
In operating temperature exceeding +85C,
derating of current is necessary for
BLM15PD series.
Please apply the derating curve shown in
chart according to the operating
temperature.

BLM15PD121SN1

Impedance ()

Chip Common Mode Choke Coil

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

BLM15PG100SN1
80

Derating of Rated Current

0
1

10

100
Frequency (MHz)

1000

3000

Rated Current (mA)

Block Type EMIFILr

40

2200
2000
1700
1500
1300
1000

1400
1100
900

85
125
Operating Temperature (C)

Microwave Absorber

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

38

BLM Series
Power Lines Type Chip Ferrite Bead
BLM15PG/BLM15PD Series 0402/1005 (inch/mm)

BLM15PG/BLM15PD

c Impedance-Frequency Characteristics
BLM15PD300SN1

18

Impedance ()

Impedance ()

30
R
20

Z
60
R
40

X
20

10

10

100
Frequency (MHz)

1000

3000

BLM15PD800SN1

10

100
Frequency (MHz)

1000

3000

1000

3000

10

100
Frequency (MHz)

1000

3000

BLM15PD121SN1

150

200

120

160
Impedance ()

Z
90
R
60
X
30

Chip EMIFILr

Impedance ()

Impedance ()

80

40
Z

12

Z
120
R
80
X
40

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

100

50

15

BLM15PD600SN1
0402/1005 (inch/mm)
Chip Ferrite Bead

BLM15PG100SN1

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

39

BLM Series

Universal Type [Power Lines/Signal Lines] Chip Ferrite Bead

BLM15AX

BLM15AX

Series 0402/1005 (inch/mm)

High Spec Ferrite Bead Ultra low DC resistance and wide impedance line up. Fit for both power lines and signal lines.
c Dimensions

c Equivalent Circuit

0.50.05

Chip Ferrite Bead

0402/1005 (inch/mm)

0.250.1

1.00.05

(Resistance element becomes dominant

at high frequencies.)

0.50.05

c Packaging
Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

10000

330mm Reel Paper Tape

50000

Bulk(Bag)

1000

: Electrode
(in mm)

Part Number

Impedance
(at 100MHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLM15AX100SN1p

10ohm 5ohm

1740mA

0.015ohm max.

-55C to +125C

BLM15AX300SN1p

30ohm 25%

1100mA

0.06ohm max.

-55C to +125C

BLM15AX700SN1p

70ohm 25%

780mA

0.1ohm max.

-55C to +125C

BLM15AX121SN1p

120ohm 25%

700mA

0.13ohm max.

-55C to +125C

BLM15AX221SN1p

220ohm 25%

600mA

0.18ohm max.

-55C to +125C

BLM15AX601SN1p

600ohm 25%

500mA

0.34ohm max.

-55C to +125C

BLM15AX102SN1p

1000ohm 25%

350mA

0.49ohm max.

-55C to +125C

Number of Circuits: 1

c Impedance-Frequency Characteristics
1500
BLM15AX102SN1
1200
BLM15AX601SN1
Impedance ()

Chip Common Mode Choke Coil

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

900

BLM15AX221SN1
BLM15AX121SN1

600
BLM15AX700SN1

Block Type EMIFILr

BLM15AX300SN1
300

BLM15AX100SN1

0
1

10

100
Frequency (MHz)

1000

3000

Microwave Absorber

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

40

BLM Series
Universal Type [Power Lines/Signal Lines] Chip Ferrite Bead
BLM15AX Series 0402/1005 (inch/mm)

BLM15AX

c Impedance-Frequency Characteristics
BLM15AX300SN1

16

120
100

45
R

8
X
4

Z
Impedance ()

Impedance ()

12
Impedance ()

BLM15AX700SN1

60

0402/1005 (inch/mm)
Chip Ferrite Bead

BLM15AX100SN1

Z
30

80
R

60
40

15

20

10

100
Frequency (MHz)

1000

3000

BLM15AX121SN1

100
Frequency (MHz)

1000

3000

Impedance ()

120
R
80
X

10

100
Frequency (MHz)

1000

3000

200

1000

3000

100
Frequency (MHz)

1000

3000

1000

3000

800
Z
R
X

100

40

10

1000

300
Z

BLM15AX601SN1

400

160
Impedance ()

10

BLM15AX221SN1

200

Z
600

400
X

200

10

100
Frequency (MHz)

1000

3000

Chip EMIFILr

Impedance ()

10

100
Frequency (MHz)

Chip Common Mode Choke Coil

BLM15AX102SN1
1500

Impedance ()

1200
Z
R

900
600

300

10

100
Frequency (MHz)

Microwave Absorber

Block Type EMIFILr

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

41

BLM Series

Signal Lines Type Chip Ferrite Bead

BLM15AG

BLM15AG

Series 0402/1005 (inch/mm)

0402 size for general signal lines.

c Dimensions

c Equivalent Circuit

0.50.05

Chip Ferrite Bead

0402/1005 (inch/mm)

0.250.1

1.00.05

(Resistance element becomes dominant

at high frequencies.)

0.50.05

c Packaging
Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

10000

330mm Reel Paper Tape

50000

Bulk(Bag)

1000

: Electrode
(in mm)

Part Number

Impedance
(at 100MHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLM15AG100SN1p

10ohm (Typ.)

1000mA

0.025ohm max.

-55C to +125C

BLM15AG700SN1p

70ohm (Typ.)

600mA

0.15ohm max.

-55C to +125C

BLM15AG121SN1p

120ohm 25%

550mA

0.19ohm max.

-55C to +125C

BLM15AG221SN1p

220ohm 25%

450mA

0.29ohm max.

-55C to +125C

BLM15AG601SN1p

600ohm 25%

300mA

0.52ohm max.

-55C to +125C

BLM15AG102SN1p

1000ohm 25%

300mA

0.65ohm max.

-55C to +125C

Number of Circuits: 1

c Impedance-Frequency Characteristics
1200

900
Impedance ()

Chip Common Mode Choke Coil

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

BLM15AG102SN1
BLM15AG601SN1
BLM15AG221SN1
BLM15AG121SN1
BLM15AG700SN1
BLM15AG100SN1

600

Block Type EMIFILr

300

0
1

10

100
Frequency (MHz)

1000

3000

c Impedance-Frequency Characteristics
BLM15AG100SN1

BLM15AG700SN1

18

BLM15AG121SN1

120

200

90

12
9

150

Impedance ()

Impedance ()

Microwave Absorber

Impedance ()

15

60

30

Z
R

100

50

3
0

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

Continued on the following page.

!Note

42

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

BLM Series
Signal Lines Type Chip Ferrite Bead
BLM15AG Series 0402/1005 (inch/mm)

BLM15AG

c Impedance-Frequency Characteristics
BLM15AG601SN1

1200

600
Z
R

200

100

900
Impedance ()

Impedance ()

300
Impedance ()

BLM15AG102SN1

800

400

0402/1005 (inch/mm)
Chip Ferrite Bead

BLM15AG221SN1

Z
400

Z
R

600

300

200
X

X
1

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Chip EMIFILr

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

43

BLM Series

Signal Lines Type Chip Ferrite Bead

BLM15BX

BLM15BX

Series 0402/1005 (inch/mm)

0402 size for high speed signal lines, low DC resistance.

c Dimensions

c Equivalent Circuit

0.50.05

Chip Ferrite Bead

0402/1005 (inch/mm)

0.250.1

1.00.05

(Resistance element becomes dominant

at high frequencies.)

0.50.05

c Packaging
Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

10000

330mm Reel Paper Tape

50000

Bulk(Bag)

1000

: Electrode
(in mm)

Part Number

Impedance
(at 100MHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLM15BX750SN1p

75ohm 25%

600mA

0.15ohm max.

-55C to +125C

BLM15BX121SN1p

120ohm 25%

600mA

0.17ohm max.

-55C to +125C

BLM15BX221SN1p

220ohm 25%

450mA

0.27ohm max.

-55C to +125C

BLM15BX471SN1p

470ohm 25%

350mA

0.41ohm max.

-55C to +125C

BLM15BX601SN1p

600ohm 25%

350mA

0.46ohm max.

-55C to +125C

BLM15BX102SN1p

1000ohm 25%

300mA

0.65ohm max.

-55C to +125C

BLM15BX182SN1p

1800ohm 25%

250mA

0.90ohm max.

-55C to +125C

Number of Circuits: 1

c Impedance-Frequency Characteristics
2500

2000

Impedance ()

Chip Common Mode Choke Coil

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

BLM15BX182SN1
1500

BLM15BX102SN1
BLM15BX601SN1
BLM15BX471SN1

1000

BLM15BX221SN1
BLM15BX121SN1

Block Type EMIFILr

BLM15BX750SN1
500

0
1

10

100
Frequency (MHz)

1000

3000

Microwave Absorber

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

44

BLM Series
Signal Lines Type Chip Ferrite Bead
BLM15BX Series 0402/1005 (inch/mm)

BLM15BX

c Impedance-Frequency Characteristics

Impedance ()

Impedance ()

120
Z
80
R
X

40

BLM15BX221SN1

250

450

200

360
Z

150

R
100
X
50

10

100
Frequency (MHz)

1000

3000

BLM15BX471SN1

Z
270
R

180

X
90

10

100
Frequency (MHz)

1000

3000

BLM15BX601SN1

10

100
Frequency (MHz)

1000

3000

1000

3000

BLM15BX102SN1

1200

900

0402/1005 (inch/mm)
Chip Ferrite Bead

BLM15BX121SN1

160

Impedance ()

BLM15BX750SN1

1600

450
300

Z
600
R
300

Z
R

800

X
400

150
0

Chip EMIFILr

1200
Impedance ()

900

600

Impedance ()

Impedance ()

750

10

100
Frequency (MHz)

1000

3000

1000

3000

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

Chip Common Mode Choke Coil

BLM15BX182SN1
2500

Impedance ()

2000
Z

1500

R
1000
X
500

10

100
Frequency (MHz)

Microwave Absorber

Block Type EMIFILr

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

45

BLM Series

Signal Lines Type Chip Ferrite Bead

BLM15B

BLM15B

Series 0402/1005 (inch/mm)

0402 size for high speed signal lines.

Chip Ferrite Bead

0402/1005 (inch/mm)

c Dimensions

c Equivalent Circuit

0.50.05

0.250.1

1.00.05

(Resistance element becomes dominant

at high frequencies.)

0.50.05

c Packaging
Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

10000

330mm Reel Paper Tape

50000

Bulk(Bag)

1000

: Electrode
(in mm)

Block Type EMIFILr

Chip Common Mode Choke Coil

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

Part Number

Impedance
(at 100MHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLM15BD750SN1p

75ohm 25%

300mA

0.20ohm max.

-55C to +125C

BLM15BD121SN1p

120ohm 25%

300mA

0.30ohm max.

-55C to +125C

BLM15BD221SN1p

220ohm 25%

300mA

0.40ohm max.

-55C to +125C

BLM15BD471SN1p

470ohm 25%

200mA

0.60ohm max.

-55C to +125C

BLM15BD601SN1p

600ohm 25%

200mA

0.65ohm max.

-55C to +125C

BLM15BD102SN1p

1000ohm 25%

200mA

0.90ohm max.

-55C to +125C

BLM15BD182SN1p

1800ohm 25%

100mA

1.40ohm max.

-55C to +125C

BLM15BB050SN1p

5ohm 25%

500mA

0.08ohm max.

-55C to +125C

BLM15BB100SN1p

10ohm 25%

300mA

0.10ohm max.

-55C to +125C

BLM15BB220SN1p

22ohm 25%

300mA

0.20ohm max.

-55C to +125C

BLM15BB470SN1p

47ohm 25%

300mA

0.35ohm max.

-55C to +125C

BLM15BB750SN1p

75ohm 25%

300mA

0.40ohm max.

-55C to +125C

BLM15BB121SN1p

120ohm 25%

300mA

0.55ohm max.

-55C to +125C

BLM15BB221SN1p

220ohm 25%

200mA

0.80ohm max.

-55C to +125C

BLM15BC121SN1p

120ohm 25%

350mA

0.45ohm max.

-55C to +125C

BLM15BC241SN1p

240ohm 25%

250mA

0.70ohm max.

-55C to +125C

BLM15BA050SN1p

5ohm 25%

300mA

0.10ohm max.

-55C to +125C

BLM15BA100SN1p

10ohm 25%

300mA

0.20ohm max.

-55C to +125C

BLM15BA220SN1p

22ohm 25%

300mA

0.30ohm max.

-55C to +125C

BLM15BA330SN1p

33ohm 25%

300mA

0.40ohm max.

-55C to +125C

BLM15BA470SN1p

47ohm 25%

200mA

0.60ohm max.

-55C to +125C

BLM15BA750SN1p

75ohm 25%

200mA

0.80ohm max.

-55C to +125C

Number of Circuits: 1

Microwave Absorber

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

46

BLM Series
Signal Lines Type Chip Ferrite Bead
BLM15B Series 0402/1005 (inch/mm)

BLM15B

c Impedance-Frequency Characteristics
BLM15BD Series

BLM15BB Series

BLM15BD182SN1
BLM15BD102SN1
BLM15BD601SN1
BLM15BD471SN1
BLM15BD221SN1
BLM15BD121SN1
BLM15BD750SN1

1000

BLM15BB221SN1
BLM15BB121SN1
BLM15BB750SN1
BLM15BB470SN1
BLM15BB220SN1
BLM15BB100SN1
BLM15BB050SN1

600
Impedance ()

Impedance ()

1500

0402/1005 (inch/mm)
Chip Ferrite Bead

900

2000

300
500

0
10

100
Frequency (MHz)

1000

3000

BLM15BC Series

10

100
Frequency (MHz)

1000

3000

1000

3000

BLM15BA Series
Chip EMIFILr

5000

4000

4000

BLM15BA750SN1

3000
Impedance ()

Impedance ()

BLM15BA470SN1
BLM15BC241SN1
2000

BLM15BC121SN1

BLM15BA330SN1

3000

BLM15BA220SN1
BLM15BA100SN1

2000

BLM15BA050SN1
1000

Chip Common Mode Choke Coil

1000

0
1

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

c Impedance-Frequency Characteristics
BLM15BD750SN1

BLM15BD121SN1

150

BLM15BD221SN1

250

400
Z

50

150

R
100
X

10

100
Frequency (MHz)

1000

3000

BLM15BD471SN1

100
Frequency (MHz)

1000

3000

600

400

200

10

100
Frequency (MHz)

10

3000

600
R
400

1000

3000

1000

3000

1000
R

500
X

200

1000

100
Frequency (MHz)

BLM15BD102SN1

Impedance ()

1500

800
Impedance ()

Impedance ()

10

1000

800

BLM15BD601SN1

1000

X
100

50
0

R
200

Block Type EMIFILr

Microwave Absorber

300
Impedance ()

100

Impedance ()

Impedance ()

200

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

Continued on the following page.

!Note

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

47

BLM Series
Signal Lines Type Chip Ferrite Bead
BLM15B Series 0402/1005 (inch/mm)

BLM15B

c Impedance-Frequency Characteristics

Chip Ferrite Bead

0402/1005 (inch/mm)

BLM15BD182SN1

BLM15BB050SN1

2000

BLM15BB100SN1

25

60
Z

1000

10

100
Frequency (MHz)

1000

3000

BLM15BB220SN1

10

100
Frequency (MHz)

1000

100

1000

3000

BLM15BB121SN1
Chip Common Mode Choke Coil

1000

3000

10

100
Frequency (MHz)

1000

3000

BLM15BB221SN1

500

200

X
1

100

50

20

100
Frequency (MHz)

100
Frequency (MHz)

300

150

10

10

400

Impedance ()

40

BLM15BB750SN1

200
R

60

3000

Impedance ()

Impedance ()

80

X
15

250

100

30

BLM15BB470SN1

120

Chip EMIFILr

R
10
5

X
0

15

500

45
Impedance ()

Impedance ()

Impedance ()

20

1500

10

100
Frequency (MHz)

1000

3000

1000

3000

BLM15BC121SN1
1000

900

300

200
R

Impedance ()

800
Impedance ()

Impedance ()

400
600

300

X
1

10

100
Frequency (MHz)

1000

3000

BLM15BC241SN1

10

100
Frequency (MHz)

1000

3000

1000
500

80

R
60
X
40
20

100
Frequency (MHz)

200
Z

Impedance ()

Impedance ()

1500

10

240

100

2000

BLM15BA100SN1

120

2500
Impedance ()

BLM15BA050SN1

3000

Block Type EMIFILr

400
200

100
0

600

160
R
120
X
80
40

R
1

10

100
Frequency (MHz)

1000

3000

BLM15BA220SN1

400
300
Z

Impedance ()

Microwave Absorber

Impedance ()

500

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

BLM15BA470SN1

1000

2000

800

1600

600
400
Z

1200
800

R
200

100
0

10

BLM15BA330SN1

600

200

Impedance ()

10

100
Frequency (MHz)

X
1000

400

X
3000

10

100
Frequency (MHz)

1000

3000

R
1

10

100
Frequency (MHz)

X
1000

3000

Continued on the following page.

!Note

48

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

BLM Series
Signal Lines Type Chip Ferrite Bead
BLM15B Series 0402/1005 (inch/mm)

BLM15B

c Impedance-Frequency Characteristics

0402/1005 (inch/mm)
Chip Ferrite Bead

BLM15BA750SN1
5000

Impedance ()

4000
3000
2000
R

1000
Z
1

10

100
Frequency (MHz)

1000

3000

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Chip EMIFILr

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

49

BLM Series

Power Lines Type Chip Ferrite Bead

BLM18P

BLM18P

Series 0603/1608 (inch/mm)

0603 size for power lines.

*Please refer to the products designed for both power lines and signal lines.

c Dimensions

c Equivalent Circuit
0.80.15

Chip Ferrite Bead

0603/1608 (inch/mm)

0.40.2

1.60.15

(Resistance element becomes dominant

at high frequencies.)

0.80.15

c Packaging
Minimum
Quantity

Code

Packaging

180mm Reel Paper Tape

4000

330mm Reel Paper Tape

10000

Bulk(Bag)

1000

: Electrode
(in mm)

Part Number

Impedance
(at 100MHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLM18PG300SN1p

30ohm (Typ.)

1000mA

0.05ohm max.

-55C to +125C

BLM18PG330SN1p

33ohm 25%

3000mA

0.025ohm max.

-55C to +125C

BLM18PG600SN1p

60ohm (Typ.)

500mA

0.10ohm max.

-55C to +125C

BLM18PG121SN1p

120ohm 25%

2000mA

0.05ohm max.

-55C to +125C

BLM18PG181SN1p

180ohm 25%

1500mA

0.09ohm max.

-55C to +125C

BLM18PG221SN1p

220ohm 25%

1400mA

0.10ohm max.

-55C to +125C

BLM18PG331SN1p

330ohm 25%

1200mA

0.15ohm max.

-55C to +125C

BLM18PG471SN1p

470ohm 25%

1000mA

0.20ohm max.

-55C to +125C

Number of Circuits: 1

c Impedance-Frequency Characteristics
600

BLM18PG471SN1
BLM18PG331SN1
BLM18PG221SN1
BLM18PG181SN1
BLM18PG121SN1
BLM18PG600SN1
BLM18PG330SN1
BLM18PG300SN1

300

c Notice (Rating)
In operating temperature exceeding +85C,
derating of current is necessary for
BLM18PG series.
Please apply the derating curve shown in
chart according to the operating
temperature.

450
Impedance ()

Derating of Rated Current

150

0
1

10

100
Frequency (MHz)

1000

3000

Rated Current (mA)

Block Type EMIFILr

Chip Common Mode Choke Coil

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

3000

2000
1500
1400
1200
1000
500
0
0

85

125

Microwave Absorber

Operating Temperature (C)

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

50

BLM Series
Power Lines Type Chip Ferrite Bead
BLM18P Series 0603/1608 (inch/mm)

BLM18P

c Impedance-Frequency Characteristics

75
Impedance ()

R
20

10

30

20
X

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

100

10

100
Frequency (MHz)

1000

3000

1000

3000

300

200

Impedance ()

Impedance ()

BLM18PG221SN1

300

150

BLM18PG181SN1

200

Z
50

25

10

BLM18PG121SN1

Impedance ()

100

40

Z
Impedance ()

Impedance ()

30

BLM18PG600SN1

50

0603/1608 (inch/mm)
Chip Ferrite Bead

BLM18PG330SN1

40

R
100

Chip EMIFILr

BLM18PG300SN1

200
Z
R
100

50

10

100
Frequency (MHz)

1000

3000

BLM18PG331SN1

10

100
Frequency (MHz)

1000

3000

1000

3000

10

100
Frequency (MHz)

BLM18PG471SN1
Chip Common Mode Choke Coil

X
0

600

450

Impedance ()

Impedance ()

450
300
Z

150

300
X

150
X
1

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

Microwave Absorber

Block Type EMIFILr

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

51

BLM Series

Power Lines Type Chip Ferrite Bead

BLM18K

BLM18K

Series 0603/1608 (inch/mm)

6A max., high performance type for power lines up to 600ohm.

*Please refer to the products designed for both power lines and signal lines.

Chip Ferrite Bead

0603/1608 (inch/mm)

c Dimensions

c Equivalent Circuit
0.80.15

1.60.15

(Resistance element becomes dominant

at high frequencies.)

0.40.2
Part Number

c Packaging

BLM18KG_TN

0.60.15

BLM18KG_SN

0.80.15

: Electrode
(in mm)

Minimum
Quantity

Code

Packaging

180mm Reel Paper Tape

4000

330mm Reel Paper Tape

10000

Bulk(Bag)

1000

Part Number

Impedance
(at 100MHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLM18KG260TN1p

26ohm 25%

6000mA

0.007ohm max.

-55C to +125C

BLM18KG300TN1p

30ohm 25%

5000mA

0.010ohm max.

-55C to +125C

BLM18KG700TN1p

70ohm 25%

3500mA

0.022ohm max.

-55C to +125C

BLM18KG101TN1p

100ohm 25%

3000mA

0.030ohm max.

-55C to +125C

BLM18KG121TN1p

120ohm 25%

3000mA

0.030ohm max.

-55C to +125C

BLM18KG221SN1p

220ohm 25%

2200mA

0.050ohm max.

-55C to +125C

BLM18KG331SN1p

330ohm 25%

1700mA

0.080ohm max.

-55C to +125C

BLM18KG471SN1p

470ohm 25%

1500mA

0.130ohm max.

-55C to +125C

BLM18KG601SN1p

600ohm 25%

1300mA

0.150ohm max.

-55C to +125C

Number of Circuits: 1

c Impedance-Frequency Characteristics
800

400

c Notice (Rating)
In operating temperature exceeding +85C,
derating of current is necessary for
BLM18KG series.
Please apply the derating curve shown in
chart according to the operating
temperature.

BLM18KG601SN1
BLM18KG471SN1
BLM18KG331SN1
BLM18KG221SN1
BLM18KG121TN1
BLM18KG101TN1
BLM18KG700TN1
BLM18KG300TN1
BLM18KG260TN1

600
Impedance ()

Block Type EMIFILr

Chip Common Mode Choke Coil

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

Derating of Rated Current

200

0
1

10

100
Frequency (MHz)

1000

6000

3000

Microwave Absorber

Rated Current (mA)

5000

3500
3000

2200
2000
1700
1500
1300
1000

0
0

85

125

Operating Temperature (C)

Continued on the following page.

!Note

52

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

BLM Series
Power Lines Type Chip Ferrite Bead
BLM18K Series 0603/1608 (inch/mm)

BLM18K

c Impedance-Frequency Characteristics
BLM18KG300TN1

40

BLM18KG700TN1

40

0603/1608 (inch/mm)
Chip Ferrite Bead

BLM18KG260TN1

100
Z

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

Impedance ()

100
R
50

10

100
Frequency (MHz)

1000

3000

1000

3000

1000

3000

400

150
Z

BLM18KG221SN1

200

150

R
50

3000

BLM18KG121TN1

200

25

10

BLM18KG101TN1

Impedance ()

20

300

Impedance ()

100

50

Chip EMIFILr

20

Impedance ()

10

75

30

Impedance ()

Impedance ()

30

Z
R

200

100

X
10

100
Frequency (MHz)

1000

3000

BLM18KG331SN1

10

1000

3000

Impedance ()

300

R
400

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

X
1000

3000

10

100
Frequency (MHz)

Microwave Absorber

Block Type EMIFILr

Z
400

200

X
0

100
Frequency (MHz)

600

200

150

10

800

600
Z

BLM18KG601SN1

800

450

100
Frequency (MHz)

BLM18KG471SN1

600

Impedance ()

Chip Common Mode Choke Coil

Impedance ()

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

53

BLM Series

Power Lines Type Chip Ferrite Bead

BLM18S

BLM18S

Series 0603/1608 (inch/mm)

6A max., high performance type for power lines.

*Please refer to the products designed for both power lines and signal lines.

Chip Ferrite Bead

0603/1608 (inch/mm)

c Dimensions

c Equivalent Circuit
0.80.15

0.50.15

1.60.15

(Resistance element becomes dominant

at high frequencies.)

0.40.2

c Packaging
Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

10000

330mm Reel Paper Tape

30000

Bulk(Bag)

1000

: Electrode
(in mm)

Part Number

Impedance
(at 100MHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLM18SG260TN1p

26ohm 25%

6000mA

0.007ohm max.

-55C to +125C

BLM18SG700TN1p

70ohm 25%

4000mA

0.020ohm max.

-55C to +125C

BLM18SG121TN1p

120ohm 25%

3000mA

0.025ohm max.

-55C to +125C

BLM18SG221TN1p

220ohm 25%

2500mA

0.040ohm max.

-55C to +125C

BLM18SG331TN1p

330ohm 25%

1500mA

0.070ohm max.

-55C to +125C

Number of Circuits: 1

c Impedance-Frequency Characteristics
400

c Notice (Rating)
In operating temperature exceeding +85C,
derating of current is necessary for
BLM18SG series.
Please apply the derating curve shown in
chart according to the operating
temperature.

BLM18SG331TN1
BLM18SG221TN1
300
BLM18SG121TN1
Impedance ()

Chip Common Mode Choke Coil

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

BLM18SG700TN1
200
BLM18SG260TN1

Derating of Rated Current

Block Type EMIFILr

100

6000

0
10

100
Frequency (MHz)

1000

3000

Rated Current (mA)

4000

3000
2500

Microwave Absorber

1500
1000

0
0

85

125

Operating Temperature (C)

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

54

BLM Series
Power Lines Type Chip Ferrite Bead
BLM18S Series 0603/1608 (inch/mm)

BLM18S

c Impedance-Frequency Characteristics
BLM18SG700TN1

40

20
X

10

100
Frequency (MHz)

1000

60

3000

10

100
Frequency (MHz)

Z
120

80
X

40

1000

3000

1000

3000

10

100
Frequency (MHz)

1000

3000

BLM18SG331TN1

400

500

Impedance ()

Z
200

100

100
Frequency (MHz)

R
200

1000

3000

X
1

10

100
Frequency (MHz)

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

10

100

300

Chip EMIFILr

400

300
Impedance ()

30

BLM18SG221TN1

160
Z

Impedance ()

10

200

90
Impedance ()

Impedance ()

30

BLM18SG121TN1

120

0603/1608 (inch/mm)
Chip Ferrite Bead

BLM18SG260TN1

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

55

BLM Series

Signal Lines Type Chip Ferrite Bead

BLM18A

BLM18A

Series 0603/1608 (inch/mm)

0603 size for general signal lines.

*Please refer to BLM15A for downsizing.

Chip Ferrite Bead

0603/1608 (inch/mm)

c Dimensions

c Equivalent Circuit

0.80.15

0.40.2

1.60.15

(Resistance element becomes dominant

at high frequencies.)

0.80.15

c Packaging
Minimum
Quantity

Code

Packaging

180mm Reel Paper Tape

4000

330mm Reel Paper Tape

10000

Bulk(Bag)

1000

: Electrode
(in mm)

Block Type EMIFILr

Part Number

Impedance
(at 100MHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLM18AG121SN1p

120ohm 25%

500mA

0.18ohm max.

-55C to +125C

BLM18AG151SN1p

150ohm 25%

500mA

0.25ohm max.

-55C to +125C

BLM18AG221SN1p

220ohm 25%

500mA

0.25ohm max.

-55C to +125C

BLM18AG331SN1p

330ohm 25%

500mA

0.30ohm max.

-55C to +125C

BLM18AG471SN1p

470ohm 25%

500mA

0.35ohm max.

-55C to +125C

BLM18AG601SN1p

600ohm 25%

500mA

0.38ohm max.

-55C to +125C

BLM18AG102SN1p

1000ohm 25%

400mA

0.50ohm max.

-55C to +125C

Number of Circuits: 1

c Impedance-Frequency Characteristics
1200

900
Impedance ()

Chip Common Mode Choke Coil

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

BLM18AG102SN1
BLM18AG601SN1
BLM18AG471SN1
BLM18AG331SN1
BLM18AG221SN1
BLM18AG151SN1
BLM18AG121SN1

600

300

0
1

10

100
Frequency (MHz)

1000

3000

c Impedance-Frequency Characteristics
BLM18AG121SN1

BLM18AG151SN1

200

BLM18AG221SN1

200

300
Z

Z
Z

R
100

50

10

100
Frequency (MHz)

Impedance ()

150
Impedance ()

Microwave Absorber

Impedance ()

150

R
100
X

200

100

50

1000

3000

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

Continued on the following page.

!Note

56

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

BLM Series
Signal Lines Type Chip Ferrite Bead
BLM18A Series 0603/1608 (inch/mm)

BLM18A

c Impedance-Frequency Characteristics

Impedance ()

Impedance ()

400
Z

300

200
X

10

100
Frequency (MHz)

800

450

600

300

R
X

150

100

1000

3000

1000

3000

BLM18AG601SN1

600

10

100
Frequency (MHz)

Z
R

400

200

1000

3000

0603/1608 (inch/mm)
Chip Ferrite Bead

BLM18AG471SN1

500

Impedance ()

BLM18AG331SN1

10

100
Frequency (MHz)

1000

3000

BLM18AG102SN1
1200

Chip EMIFILr

Impedance ()

900
Z
R

600

300
X

10

100
Frequency (MHz)

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

57

BLM Series

Signal Lines Type Chip Ferrite Bead

BLM18B

BLM18B

Series 0603/1608 (inch/mm)

0603 size for high speed signal lines.

*Please refer to BLM15B for downsizing.

Chip Ferrite Bead

0603/1608 (inch/mm)

c Dimensions

c Equivalent Circuit

0.80.15

0.40.2

1.60.15

(Resistance element becomes dominant

at high frequencies.)

0.80.15

c Packaging
Minimum
Quantity

Code

Packaging

180mm Reel Paper Tape

4000

330mm Reel Paper Tape

10000

Bulk(Bag)

1000

: Electrode
(in mm)

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

Part Number

Impedance
(at 100MHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLM18BD470SN1p

47ohm 25%

500mA

0.30ohm max.

-55C to +125C

BLM18BD121SN1p

120ohm 25%

200mA

0.40ohm max.

-55C to +125C

BLM18BD151SN1p

150ohm 25%

200mA

0.40ohm max.

-55C to +125C

BLM18BD221SN1p

220ohm 25%

200mA

0.45ohm max.

-55C to +125C

BLM18BD331SN1p

330ohm 25%

200mA

0.50ohm max.

-55C to +125C

BLM18BD421SN1p

420ohm 25%

200mA

0.55ohm max.

-55C to +125C

BLM18BD471SN1p

470ohm 25%

200mA

0.55ohm max.

-55C to +125C

BLM18BD601SN1p

600ohm 25%

200mA

0.65ohm max.

-55C to +125C

BLM18BD102SN1p

1000ohm 25%

100mA

0.85ohm max.

-55C to +125C

BLM18BD152SN1p

1500ohm 25%

50mA

1.20ohm max.

-55C to +125C

BLM18BD182SN1p

1800ohm 25%

50mA

1.50ohm max.

-55C to +125C

BLM18BD222SN1p

2200ohm 25%

50mA

1.50ohm max.

-55C to +125C

BLM18BD252SN1p

2500ohm 25%

50mA

1.50ohm max.

-55C to +125C

BLM18BB050SN1p

5ohm 25%

700mA

0.05ohm max.

-55C to +125C

BLM18BB100SN1p

10ohm 25%

700mA

0.10ohm max.

-55C to +125C

BLM18BB220SN1p

22ohm 25%

600mA

0.20ohm max.

-55C to +125C

BLM18BB470SN1p

47ohm 25%

550mA

0.25ohm max.

-55C to +125C

BLM18BB600SN1p

60ohm 25%

550mA

0.25ohm max.

-55C to +125C

BLM18BB750SN1p

75ohm 25%

500mA

0.30ohm max.

-55C to +125C

BLM18BB121SN1p

120ohm 25%

500mA

0.30ohm max.

-55C to +125C

BLM18BB141SN1p

140ohm 25%

450mA

0.35ohm max.

-55C to +125C

BLM18BB151SN1p

150ohm 25%

450mA

0.37ohm max.

-55C to +125C

BLM18BB221SN1p

220ohm 25%

450mA

0.45ohm max.

-55C to +125C

BLM18BB331SN1p

330ohm 25%

400mA

0.58ohm max.

-55C to +125C

BLM18BB471SN1p

470ohm 25%

300mA

0.85ohm max.

-55C to +125C

BLM18BA050SN1p

5ohm 25%

500mA

0.20ohm max.

-55C to +125C

BLM18BA100SN1p

10ohm 25%

500mA

0.25ohm max.

-55C to +125C

BLM18BA220SN1p

22ohm 25%

500mA

0.35ohm max.

-55C to +125C

BLM18BA470SN1p

47ohm 25%

300mA

0.55ohm max.

-55C to +125C

BLM18BA750SN1p

75ohm 25%

300mA

0.70ohm max.

-55C to +125C

BLM18BA121SN1p

120ohm 25%

200mA

0.90ohm max.

-55C to +125C

Number of Circuits: 1

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

58

BLM Series
Signal Lines Type Chip Ferrite Bead
BLM18B Series 0603/1608 (inch/mm)

BLM18B

c Impedance-Frequency Characteristics
BLM18BD Series (470ohm to 2500ohm)

BLM18BD Series (47ohm to 420ohm)

1000

0603/1608 (inch/mm)
Chip Ferrite Bead

2500

2000

Impedance ()

Impedance ()

750
BLM18BD421SN1
BLM18BD331SN1
BLM18BD221SN1
BLM18BD151SN1
BLM18BD121SN1
BLM18BD470SN1

500

BLM18BD252SN1
BLM18BD222SN1
BLM18BD182SN1
BLM18BD152SN1
BLM18BD102SN1
BLM18BD601SN1
BLM18BD471SN1

1500

1000

250
500

0
10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

1000

3000

1000

3000

BLM18BB Series (120ohm to 470ohm)

BLM18BB Series (5ohm to 75ohm)

Chip EMIFILr

2000

300

1500
Impedance ()

Impedance ()

200
BLM18BB750SN1
BLM18BB600SN1
BLM18BB470SN1
BLM18BB220SN1
BLM18BB100SN1
BLM18BB050SN1

100

BLM18BB471SN1
BLM18BB331SN1
BLM18BB221SN1
BLM18BB151SN1
BLM18BB141SN1
BLM18BB121SN1

1000

Chip Common Mode Choke Coil

500

0
1

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

BLM18BA Series (47ohm to 120ohm)

BLM18BA Series (5ohm to 220ohm)

500

10000

400

300

200
BLM18BA220SN1
BLM18BA100SN1
BLM18BA050SN1

5000
BLM18BA121SN1
BLM18BA750SN1
BLM18BA470SN1

Block Type EMIFILr

Impedance ()

Impedance ()

7500

2500

100

0
1

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

c Impedance-Frequency Characteristics
BLM18BD470SN1

BLM18BD121SN1

150

BLM18BD151SN1

300

400

50

200
Z
R

100
X

Z
R
200

100
X

X
0

10

100
Frequency (MHz)

1000

Microwave Absorber

Impedance ()

Impedance ()

Impedance ()

300
100

3000

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

Continued on the following page.

!Note

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

59

BLM Series
Signal Lines Type Chip Ferrite Bead
BLM18B Series 0603/1608 (inch/mm)

BLM18B

c Impedance-Frequency Characteristics

Chip Ferrite Bead

0603/1608 (inch/mm)

BLM18BD221SN1

BLM18BD331SN1

600

BLM18BD421SN1

800

1000
800

Z
R
200

Impedance ()

Impedance ()

Impedance ()

600
400

Z
R

400

200

600

R
400
200
X

X
1

10

100
Frequency (MHz)

1000

3000

BLM18BD471SN1

100
Frequency (MHz)

Impedance ()

500

10

10

100
Frequency (MHz)

R
600

1000

3000

BLM18BD152SN1

1000

2400

1500

1800

1000

3000

1000

3000

500

10

100
Frequency (MHz)

1000

3000

BLM18BD182SN1

2000

3000

100
Frequency (MHz)

1000

1500

X
1

2000

300

250

Chip Common Mode Choke Coil

3000

BLM18BD102SN1

900

Z
R

1000

1200

750
Impedance ()

10

BLM18BD601SN1

1000

Chip EMIFILr

Impedance ()

10

100
Frequency (MHz)

BLM18BD222SN1
2500

1000

Impedance ()

Impedance ()

Impedance ()

2000

1200

600

500
X

1500

R
1000
500

X
1

10

100
Frequency (MHz)

1000

3000

BLM18BD252SN1

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

BLM18BB100SN1
60

25
20
Z

1500

Impedance ()

2000
Impedance ()

10

BLM18BB050SN1

2500

Block Type EMIFILr

1000

Impedance ()

15

R
10
X

40

20
X

500
X
1

10

100
Frequency (MHz)

1000

3000

BLM18BB220SN1

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

3000

300

200
Impedance ()

Z
R
60
X
30

150

R
100

200
Z
R
100

50
X

X
0

1000

BLM18BB600SN1

250

90
Impedance ()

10

BLM18BB470SN1

120

Microwave Absorber

Impedance ()

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

Continued on the following page.

!Note

60

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

BLM Series
Signal Lines Type Chip Ferrite Bead
BLM18B Series 0603/1608 (inch/mm)

BLM18B

c Impedance-Frequency Characteristics
BLM18BB121SN1

600

400
R

100

450

Impedance ()

200

Impedance ()

Z
Impedance ()

BLM18BB141SN1

500

300

0603/1608 (inch/mm)
Chip Ferrite Bead

BLM18BB750SN1

300
200
X

Z
R

300

X
150

100
R
10

100
Frequency (MHz)

1000

3000

BLM18BB151SN1

10

100
Frequency (MHz)

1000

3000

BLM18BB221SN1

750

Impedance ()

450

300
X

100
Frequency (MHz)

1000

3000

1000

3000

1200
Z
R

500
X
250

150

10

1500

750
Z

BLM18BB331SN1

1000

600
Impedance ()

Chip EMIFILr

Impedance ()

900

R
600
300
X

10

100
Frequency (MHz)

1000

3000

BLM18BB471SN1

10

100
Frequency (MHz)

1000

Z
Impedance ()

1000

Z
R

60

30

500

10

100
Frequency (MHz)

150

R
100

50
X

X
1

10

200

90
R

BLM18BA100SN1

120

1500

3000

BLM18BA050SN1

2000

Impedance ()

100
Frequency (MHz)

1000

3000

BLM18BA220SN1

10

100
Frequency (MHz)

1000

3000

BLM18BA470SN1

500

Chip Common Mode Choke Coil

Impedance ()

10

100
Frequency (MHz)

1000

3000

BLM18BA750SN1

1500

4500

200

1000

500

3000

1500

100
0

10

100
Frequency (MHz)

1000

X
3000

10

100
Frequency (MHz)

X
1000

3000

Block Type EMIFILr

300

Impedance ()

Impedance ()

Impedance ()

400

10

100
Frequency (MHz)

R
X
1000

3000

BLM18BA121SN1

7500

Microwave Absorber

Impedance ()

10000

5000

2500

R
Z

10

100
Frequency (MHz)

X
1000

3000

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

61

BLM Series

Signal Lines Type Chip Ferrite Bead

BLM18T

BLM18T

Series 0603/1608 (inch/mm)

Thin 0603 size for general signal lines.

c Dimensions

c Equivalent Circuit
0.80.15
0.60.10

Chip Ferrite Bead

0603/1608 (inch/mm)

1.60.15

(Resistance element becomes dominant

at high frequencies.)

0.40.2

c Packaging
Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

10000

Bulk(Bag)

1000

: Electrode
(in mm)

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

Part Number

Impedance
(at 100MHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLM18TG121TN1p

120ohm 25%

200mA

0.25ohm max.

-55C to +125C

BLM18TG221TN1p

220ohm 25%

200mA

0.30ohm max.

-55C to +125C

BLM18TG601TN1p

600ohm 25%

200mA

0.45ohm max.

-55C to +125C

BLM18TG102TN1p

1000ohm 25%

100mA

0.60ohm max.

-55C to +125C

c Impedance-Frequency Characteristics

c Impedance-Frequency Characteristics

1200

1000

BLM18TG102TN1

800

BLM18TG601TN1

BLM18TG121TN1
150

BLM18TG221TN1

600

Z
120

BLM18TG121TN1
Impedance ()

Impedance ()

Chip Common Mode Choke Coil

Number of Circuits: 1

400

200

Block Type EMIFILr

10

100
Frequency (MHz)

1000

R
90
60
X
30

3000

BLM18TG221TN1

BLM18TG601TN1

100

400

10

100
Frequency (MHz)

3000

400
X

1000

3000

10

100
Frequency (MHz)

1000

3000

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

62

1000

600

200

X
1

3000

800

200

X
50

Microwave Absorber

Impedance ()

Impedance ()

Impedance ()

150

1000

1000
600

200

100
Frequency (MHz)

1200

250

10

BLM18TG102TN1

800

300

10

100
Frequency (MHz)

BLM Series

Signal Lines Type Chip Ferrite Bead

BLM18R

BLM18R

Series 0603/1608 (inch/mm)

For digital I/F. Reduces the distortion of waveform created by resonance.

c Dimensions

c Equivalent Circuit

1.60.15

0603/1608 (inch/mm)
Chip Ferrite Bead

0.80.15

0.40.2

(Resistance element becomes dominant

at high frequencies.)

0.80.15

c Packaging
Minimum
Quantity

Code

Packaging

180mm Reel Paper Tape

4000

330mm Reel Paper Tape

10000

Bulk(Bag)

1000

: Electrode
(in mm)

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

Part Number

Impedance
(at 100MHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLM18RK121SN1p

120ohm 25%

200mA

0.25ohm max.

-55C to +125C

BLM18RK221SN1p

220ohm 25%

200mA

0.30ohm max.

-55C to +125C

BLM18RK471SN1p

470ohm 25%

200mA

0.50ohm max.

-55C to +125C

BLM18RK601SN1p

600ohm 25%

200mA

0.60ohm max.

-55C to +125C

BLM18RK102SN1p

1000ohm 25%

200mA

0.80ohm max.

-55C to +125C

Chip Common Mode Choke Coil

c Rated Value (p: packaging code)

Number of Circuits: 1

c Impedance-Frequency Characteristics
1200

Impedance ()

900
BLM18RK102SN1
BLM18RK601SN1
BLM18RK471SN1
BLM18RK221SN1
BLM18RK121SN1

600

Block Type EMIFILr

300

0
1

10

100
Frequency (MHz)

1000

3000

c Impedance-Frequency Characteristics
BLM18RK221SN1

200

600

100

R
50

450

200

Impedance ()

Impedance ()

150
Impedance ()

BLM18RK471SN1

300

R
100

R
300

150

Microwave Absorber

BLM18RK121SN1

X
0

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

Continued on the following page.

!Note

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

63

BLM Series
Signal Lines Type Chip Ferrite Bead
BLM18R Series 0603/1608 (inch/mm)

BLM18R

c Impedance-Frequency Characteristics

Chip Ferrite Bead

0603/1608 (inch/mm)

BLM18RK601SN1

BLM18RK102SN1
1200

800

1000
Impedance ()

Impedance ()

600
Z
400

800
Z
600

400

200

X
200

X
1

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Chip EMIFILr

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

64

EMI
Suppression BLMppR Series
Effect

Waveform Distortion Suppressing

Performance of BLMppR Series

Measuring Circuits
Measuring Point
AC04

Type of Filter

Chip Ferrite Bead

1MHz

AC00
Pattern20cm

Filter

EMI Suppression Effect / Description

Signal waveform (100nsec/div, 2V/div)

Expand (10nsec/div, 2V/div)

Spectrum
85

Initial
(No filter)

75
70

Chip EMIFILr

Level (dBV)

80

65
60
55
50
45
30 50

100

150
200
250
Frequency (MHz)

300

100

150
200
250
Frequency (MHz)

300

100

150
200
250
Frequency (MHz)

300

Signal waveform (100nsec/div, 2V/div)

Expand (10nsec/div, 2V/div)

Chip Common Mode Choke Coil

Ringing is caused on the signal waveform.

Such ringing contains several hundred MHz harmonic components and generates noise.

Spectrum
85

Resister (47)
is used

75
70
65
60
55
50
45
30 50

Block Type EMIFILr

Level (dBV)

80

Comparing initial waveform, ringing is suppressed a little.

However, high level waveform distortion still remains.

Signal waveform (100nsec/div, 2V/div)

Expand (10nsec/div, 2V/div)

Spectrum
85
75
70
65
60
55
50
45
30 50

BLM18R has excellent performance for noise suppression and waveform distortion suppression.
BLM18R suppresses drastically not only the spectrum level in more than 100MHz range but waveform distortion.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

65

Microwave Absorber

BLM18RK221SN1
(220 at 100MHz)
is used

Level (dBV)

80

BLM Series

Power Lines Type Chip Ferrite Bead

BLM21P

BLM21P

Series 0805/2012 (inch/mm)

0805 size for power lines.

*Please refer to the products designed for both power lines and signal lines. *Please refer to BLM18K for downsizing.

c Dimensions

c Equivalent Circuit

0.850.2

Chip Ferrite Bead

0805/2012 (inch/mm)

0.50.2

2.00.2

(Resistance element becomes dominant

at high frequencies.)

1.250.2

c Packaging
Minimum
Quantity

Code

Packaging

180mm Reel Paper Tape

4000

330mm Reel Paper Tape

10000

Bulk(Bag)

1000

EIA CODE : 0805

: Electrode
(in mm)

Part Number

Impedance
(at 100MHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLM21PG220SN1p

22ohm 25%

6000mA

0.009ohm max.

-55C to +125C

BLM21PG300SN1p

30ohm (Typ.)

4000mA

0.014ohm max.

-55C to +125C

BLM21PG600SN1p

60ohm 25%

3500mA

0.02ohm max.

-55C to +125C

BLM21PG121SN1p

120ohm 25%

3000mA

0.03ohm max.

-55C to +125C

BLM21PG221SN1p

220ohm 25%

2000mA

0.045ohm max.

-55C to +125C

BLM21PG331SN1p

330ohm 25%

1500mA

0.07ohm max.

-55C to +125C

Number of Circuits: 1

c Impedance-Frequency Characteristics
500

400

BLM21PG221SN1

300

BLM21PG121SN1
BLM21PG600SN1

200

Derating of Rated Current

BLM21PG300SN1
BLM21PG220SN1

100

Block Type EMIFILr

c Notice (Rating)
In operating temperature exceeding +85C,
derating of current is necessary for
BLM21PG series.
Please apply the derating curve shown in
chart according to the operating
temperature.

BLM21PG331SN1

Impedance ()

Chip Common Mode Choke Coil

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

6000

0
10

100
Frequency (MHz)

1000

3000

Rated Current (mA)

4000
3500
3000

Microwave Absorber

2000
1500
1000

0
0

85

125

Operating Temperature (C)

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

66

BLM Series
Power Lines Type Chip Ferrite Bead
BLM21P Series 0805/2012 (inch/mm)

BLM21P

c Impedance-Frequency Characteristics
BLM21PG300SN1

40

10

10

100
Frequency (MHz)

20
X

1000

3000

BLM21PG121SN1

10

100
Frequency (MHz)

1000

10

100
Frequency (MHz)

1000

3000

1000

3000

BLM21PG331SN1
500

240

R
80
X

400
Impedance ()

Impedance ()

120

R
180
120

R
300

200

40

60

1000

3000

100

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

100
Frequency (MHz)

10

3000

300

R
40
20

BLM21PG221SN1

160

Z
60

Chip EMIFILr

30

80

10

Impedance ()

Z
Impedance ()

Impedance ()

Impedance ()

20

100

40

30

BLM21PG600SN1

50

0805/2012 (inch/mm)
Chip Ferrite Bead

BLM21PG220SN1

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

67

BLM Series

Signal Lines Type Chip Ferrite Bead

BLM21A

BLM21A

Series 0805/2012 (inch/mm)

0805 size for general signal lines.

c Dimensions

c Equivalent Circuit

0.850.2

Chip Ferrite Bead

0805/2012 (inch/mm)

0.50.2

2.00.2

(Resistance element becomes dominant

at high frequencies.)

1.250.2

c Packaging
Minimum
Quantity

Code

Packaging

180mm Reel Paper Tape

4000

330mm Reel Paper Tape

10000

Bulk(Bag)

1000

EIA CODE : 0805

: Electrode
(in mm)

Block Type EMIFILr

Part Number

Impedance
(at 100MHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLM21AG121SN1p

120ohm 25%

800mA

0.10ohm max.

-55C to +125C

BLM21AG151SN1p

150ohm 25%

800mA

0.10ohm max.

-55C to +125C

BLM21AG221SN1p

220ohm 25%

800mA

0.13ohm max.

-55C to +125C

BLM21AG331SN1p

330ohm 25%

700mA

0.16ohm max.

-55C to +125C

BLM21AG471SN1p

470ohm 25%

700mA

0.19ohm max.

-55C to +125C

BLM21AG601SN1p

600ohm 25%

600mA

0.21ohm max.

-55C to +125C

BLM21AG102SN1p

1000ohm 25%

500mA

0.28ohm max.

-55C to +125C

Number of Circuits: 1

c Impedance-Frequency Characteristics
1200
BLM21AG102SN1
BLM21AG601SN1
900
BLM21AG471SN1
Impedance ()

Chip Common Mode Choke Coil

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

BLM21AG331SN1
BLM21AG221SN1
600
BLM21AG151SN1
BLM21AG121SN1
300

0
1

10

100
Frequency (MHz)

1000

3000

c Impedance-Frequency Characteristics
BLM21AG121SN1

BLM21AG151SN1

200

BLM21AG221SN1

200

300
Z

50

10

100
Frequency (MHz)

R
100

50

1000

3000

Impedance ()

R
100

240

150

Impedance ()

Microwave Absorber

Impedance ()

150

180
120

X
60

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

Continued on the following page.

!Note

68

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

BLM Series
Signal Lines Type Chip Ferrite Bead
BLM21A Series 0805/2012 (inch/mm)

BLM21A

c Impedance-Frequency Characteristics
BLM21AG471SN1

400

BLM21AG601SN1

600

800

0805/2012 (inch/mm)
Chip Ferrite Bead

BLM21AG331SN1

Z
Z
Impedance ()

Impedance ()

450

200

100

600

Impedance ()

300

300

150

R
400

200
X
X

10

100
Frequency (MHz)

1000

3000

1000

3000

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

BLM21AG102SN1
1200
Z

Chip EMIFILr

Impedance ()

900

600
R
300
X
1

10

100
Frequency (MHz)

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

69

BLM Series

Signal Lines Type Chip Ferrite Bead

BLM21B

BLM21B

Series 0805/2012 (inch/mm)

0805 size for high speed signal lines.

c Dimensions

c Equivalent Circuit

Chip Ferrite Bead

0805/2012 (inch/mm)

2.00.2

(Resistance element becomes dominant

at high frequencies.)

1.250.2
Part Number

c Packaging

BLM21B
0.850.2 0.50.2
(exclude items below)
BLM21BD222SN1 1.250.2 0.50.2
BLM21BD272SN1 1.250.2 0.30.2

All except for BLM21BD222SN1/21BD272SN1

Minimum
Code
Packaging
Quantity

: Electrode
(in mm)

180mm Reel Paper Tape

4000

330mm Reel Paper Tape

10000

Bulk(Bag)

1000

Chip EMIFILr

BLM21BD222SN1/21BD272SN1 only
Minimum
Code
Packaging
Quantity
L

180mm Reel Plastic Tape

3000

330mm Reel Plastic Tape

10000

Bulk(Bag)

1000

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Part Number

Impedance
(at 100MHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLM21BD121SN1p

120ohm 25%

200mA

0.25ohm max.

-55C to +125C

BLM21BD151SN1p

150ohm 25%

200mA

0.25ohm max.

-55C to +125C

BLM21BD221SN1p

220ohm 25%

200mA

0.25ohm max.

-55C to +125C

BLM21BD331SN1p

330ohm 25%

200mA

0.30ohm max.

-55C to +125C

BLM21BD421SN1p

420ohm 25%

200mA

0.30ohm max.

-55C to +125C

BLM21BD471SN1p

470ohm 25%

200mA

0.35ohm max.

-55C to +125C

BLM21BD601SN1p

600ohm 25%

200mA

0.35ohm max.

-55C to +125C

BLM21BD751SN1p

750ohm 25%

200mA

0.40ohm max.

-55C to +125C

BLM21BD102SN1p

1000ohm 25%

200mA

0.40ohm max.

-55C to +125C

BLM21BD152SN1p

1500ohm 25%

200mA

0.45ohm max.

-55C to +125C

BLM21BD182SN1p

1800ohm 25%

200mA

0.50ohm max.

-55C to +125C

BLM21BD222TN1p

2200ohm 25%

200mA

0.60ohm max.

-55C to +125C

BLM21BD222SN1p

2250ohm (Typ.)

200mA

0.60ohm max.

-55C to +125C

BLM21BD272SN1p

2700ohm 25%

200mA

0.80ohm max.

-55C to +125C

BLM21BB050SN1p

5ohm 25%

1000mA

0.02ohm max.

-55C to +125C

BLM21BB600SN1p

60ohm 25%

800mA

0.13ohm max.

-55C to +125C

BLM21BB750SN1p

75ohm 25%

700mA

0.16ohm max.

-55C to +125C

BLM21BB121SN1p

120ohm 25%

600mA

0.19ohm max.

-55C to +125C

BLM21BB151SN1p

150ohm 25%

600mA

0.21ohm max.

-55C to +125C

BLM21BB201SN1p

200ohm 25%

500mA

0.26ohm max.

-55C to +125C

BLM21BB221SN1p

220ohm 25%

500mA

0.26ohm max.

-55C to +125C

BLM21BB331SN1p

330ohm 25%

400mA

0.33ohm max.

-55C to +125C

BLM21BB471SN1p

470ohm 25%

400mA

0.40ohm max.

-55C to +125C

Number of Circuits: 1

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

70

BLM Series
Signal Lines Type Chip Ferrite Bead
BLM21B Series 0805/2012 (inch/mm)

BLM21B

c Impedance-Frequency Characteristics
BLM21BD Series

BLM21BB Series

3000

2000

BLM21BD222SN1
BLM21BD222TN1
BLM21BD182SN1

BLM21BD152SN1
BLM21BD102SN1
BLM21BD751SN1
BLM21BD601SN1

1800

1600
BLM21BB471SN1
Impedance ()

Impedance ()

2400

BLM21BD471SN1
BLM21BD421SN1
BLM21BD331SN1
BLM21BD221SN1

1200

1200

BLM21BD151SN1
BLM21BD121SN1

600

0805/2012 (inch/mm)
Chip Ferrite Bead

BLM21BD272SN1

BLM21BB201SN1

BLM21BB331SN1
BLM21BB221SN1

BLM21BB750SN1

BLM21BB151SN1

800

BLM21BB121SN1
BLM21BB600SN1
400

BLM21BB050SN1

0
1

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

BLM21BD151SN1

300

Impedance ()

Z
180

120

400

240
Z

180
120

320

R
240
160
X

60
0

480

300

60

10

100
Frequency (MHz)

1000

3000

BLM21BD331SN1

10

100
Frequency (MHz)

80

1000

BLM21BD421SN1

800

800

600

600

3000

10

100
Frequency (MHz)

1000

3000

1000

3000

1000

3000

Chip Common Mode Choke Coil

Impedance ()

240

BLM21BD221SN1

360

Impedance ()

BLM21BD121SN1

Chip EMIFILr

c Impedance-Frequency Characteristics

BLM21BD471SN1
900

400
X
200

Impedance ()

Impedance ()

Impedance ()

750
Z
R
400

200

600

R
450
300
X

10

100
Frequency (MHz)

1000

3000

BLM21BD601SN1

10

3000

Impedance ()

400
X

200

100
Frequency (MHz)

1200

600

10

1600

Z
800

BLM21BD102SN1

1500

1000
Impedance ()

1000

BLM21BD751SN1

1200

1200

Z
900
R
600

R
800
X
400

300
X

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

Microwave Absorber

100
Frequency (MHz)

Impedance ()

Block Type EMIFILr

150

Continued on the following page.

!Note

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

71

BLM Series
Signal Lines Type Chip Ferrite Bead
BLM21B Series 0805/2012 (inch/mm)

BLM21B

c Impedance-Frequency Characteristics
BLM21BD152SN1

BLM21BD182SN1

Chip Ferrite Bead

0805/2012 (inch/mm)

2000

BLM21BD222TN1

2400

2400

800
X
400

1600
R
1200
800
400

10

100
Frequency (MHz)

1000

3000

BLM21BD222SN1

10

100
Frequency (MHz)

3000

10

100
Frequency (MHz)

1000

3000

30

1600

Impedance ()

Impedance ()

Chip EMIFILr

800

BLM21BB050SN1

1200
800
X

25

2400
R

1600

10

15
10

R
X

20

800

400

100
Frequency (MHz)

1000

3000

BLM21BB600SN1
Chip Common Mode Choke Coil

1000

3200

2000

R
1200

400

BLM21BD272SN1

2400

1600

Impedance ()

Impedance ()

Impedance ()

Impedance ()

R
1200

2000

2000

1600

10

100
Frequency (MHz)

1000

3000

BLM21BB750SN1

10

100
Frequency (MHz)

1000

3000

1000

3000

1000

3000

BLM21BB121SN1

300

300

400

Z
R
100

Impedance ()

Impedance ()

Impedance ()

300
200

200
Z

100
X

200

100
X

X
0

10

100
Frequency (MHz)

1000

3000

BLM21BB151SN1

10

100
Frequency (MHz)

1000

BLM21BB201SN1

600

3000

200

600
Impedance ()

Impedance ()

Impedance ()

Block Type EMIFILr

100
Frequency (MHz)

800

10

BLM21BB221SN1

600

400

400
R

200

R
400
X
200

X
0

10

100
Frequency (MHz)

1000

3000

BLM21BB331SN1

100
Frequency (MHz)

1000

3000

1000

3000

2000
Z

1500
Impedance ()

900
Impedance ()

10

BLM21BB471SN1

1200

Microwave Absorber

R
600
X
300

R
1000

500
X

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

72

10

100
Frequency (MHz)

BLM Series

Signal Lines Type Chip Ferrite Bead

BLM21R

BLM21R

Series 0805/2012 (inch/mm)

For digital I/F. Reduces the distortion of waveform created by resonance.

c Dimensions

c Equivalent Circuit

2.00.2

0805/2012 (inch/mm)
Chip Ferrite Bead

0.850.2

0.50.2

(Resistance element becomes dominant

at high frequencies.)

1.250.2

c Packaging
Minimum
Quantity

Code

Packaging

180mm Reel Paper Tape

4000

330mm Reel Paper Tape

10000

Bulk(Bag)

1000

EIA CODE : 0805

: Electrode
(in mm)

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

Part Number

Impedance
(at 100MHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLM21RK121SN1p

120ohm 25%

200mA

0.15ohm max.

-55C to +125C

BLM21RK221SN1p

220ohm 25%

200mA

0.20ohm max.

-55C to +125C

BLM21RK471SN1p

470ohm 25%

200mA

0.25ohm max.

-55C to +125C

BLM21RK601SN1p

600ohm 25%

200mA

0.30ohm max.

-55C to +125C

BLM21RK102SN1p

1000ohm 25%

200mA

0.50ohm max.

-55C to +125C

Chip Common Mode Choke Coil

c Rated Value (p: packaging code)

Number of Circuits: 1

c Impedance-Frequency Characteristics
1200
BLM21RK102SN1

Impedance ()

900
BLM21RK601SN1

BLM21RK471SN1
BLM21RK221SN1
600
BLM21RK121SN1

Block Type EMIFILr

300

0
1

10

100
Frequency (MHz)

1000

3000

c Impedance-Frequency Characteristics
BLM21RK221SN1

150
120

90
60
X

30

600
Z

240

Z
Impedance ()

Impedance ()

BLM21RK471SN1

300

450
Impedance ()

180

R
180
120

300

Microwave Absorber

BLM21RK121SN1

150

60
X

X
0

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

Continued on the following page.

!Note

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

73

BLM Series
Signal Lines Type Chip Ferrite Bead
BLM21R Series 0805/2012 (inch/mm)

BLM21R

c Impedance-Frequency Characteristics
BLM21RK601SN1

BLM21RK102SN1

Chip Ferrite Bead

0805/2012 (inch/mm)

750

1200
Z

Z
900

Impedance ()

Impedance ()

600
450
300

300

150

X
X
1

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Chip EMIFILr

R
600

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

74

BLM Series

Power Lines Type Chip Ferrite Bead

BLM31P

BLM31P

Series 1206/3216 (inch/mm)

1206 size for power lines.

*Please refer to the products designed for both power lines and signal lines.

c Equivalent Circuit
1206/3216 (inch/mm)
Chip Ferrite Bead

c Dimensions

1.10.2

0.70.3

3.20.2

(Resistance element becomes dominant

at high frequencies.)

1.60.2

c Packaging
Code

Packaging

: Electrode
(in mm)

Minimum
Quantity

180mm Reel Embossed Tape

3000

330mm Reel Embossed Tape

10000

Bulk(Bag)

1000

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

Part Number

Impedance
(at 100MHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLM31PG330SN1p

33ohm 25%

6000mA

0.009ohm max.

-55C to +125C

BLM31PG500SN1p

50ohm (Typ.)

3500mA

0.015ohm max.

-55C to +125C

BLM31PG121SN1p

120ohm 25%

3500mA

0.02ohm max.

-55C to +125C

BLM31PG391SN1p

390ohm 25%

2000mA

0.05ohm max.

-55C to +125C

BLM31PG601SN1p

600ohm 25%

1500mA

0.08ohm max.

-55C to +125C

Chip Common Mode Choke Coil

c Rated Value (p: packaging code)

Number of Circuits: 1

c Impedance-Frequency Characteristics
800

In operating temperature exceeding +85C,

derating of current is necessary for
BLM31PG series.
Please apply the derating curve shown in
chart according to the operating
temperature.

Impedance ()

600

BLM31PG601SN1
BLM31PG391SN1
BLM31PG121SN1
BLM31PG500SN1
BLM31PG330SN1

400

c Notice (Rating)

Derating of Rated Current

Block Type EMIFILr

200

6000

0
10

100
Frequency (MHz)

1000

3000

Rated Current (mA)

3500

2000

Microwave Absorber

1500
1000

0
0

85

125

Operating Temperature (C)

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

75

BLM Series
Power Lines Type Chip Ferrite Bead
BLM31P Series 1206/3216 (inch/mm)

BLM31P

c Impedance-Frequency Characteristics
BLM31PG330SN1

BLM31PG500SN1

30
20

10

100
Frequency (MHz)

R
40
X

1000

3000

BLM31PG391SN1

120
R
80
X

20

10

Impedance ()

Impedance ()

160

60
Impedance ()

Chip Ferrite Bead

1206/3216 (inch/mm)

200
Z

40

BLM31PG121SN1

80

50

40

10

100
Frequency (MHz)

1000

3000

1000

3000

BLM31PG601SN1

500

800
Z
Z
600

Impedance ()

Impedance ()

Chip EMIFILr

400
300
200
X

100

10

100
Frequency (MHz)

200

1000

3000

10

100
Frequency (MHz)

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

R
400

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

76

10

100
Frequency (MHz)

1000

3000

BLM Series

Power Lines Type Chip Ferrite Bead

BLM41P

BLM41P

Series 1806/4516 (inch/mm)

1806 size for power lines.

*Please refer to the products designed for both power lines and signal lines.

c Equivalent Circuit
1806/4516 (inch/mm)
Chip Ferrite Bead

c Dimensions

1.60.2

0.70.3

4.50.2

(Resistance element becomes dominant

at high frequencies.)

1.60.2

c Packaging
Code

Packaging

Minimum
Quantity
2500

: Electrode
(in mm)

180mm Reel Embossed Tape

330mm Reel Embossed Tape

8000

Bulk(Bag)

1000

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

Part Number

Impedance
(at 100MHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLM41PG600SN1p

60ohm (Typ.)

6000mA

0.009ohm max.

-55C to +125C

BLM41PG750SN1p

75ohm (Typ.)

3500mA

0.015ohm max.

-55C to +125C

BLM41PG181SN1p

180ohm 25%

3500mA

0.02ohm max.

-55C to +125C

BLM41PG471SN1p

470ohm 25%

2000mA

0.05ohm max.

-55C to +125C

BLM41PG102SN1p

1000ohm 25%

1500mA

0.09ohm max.

-55C to +125C

Chip Common Mode Choke Coil

c Rated Value (p: packaging code)

Number of Circuits: 1

c Impedance-Frequency Characteristics

c Notice (Rating)

BLM41PG Series (60ohm to 75ohm)

In operating temperature exceeding +85C,

derating of current is necessary for
BLM41PG series.
Please apply the derating curve shown in
chart according to the operating
temperature.

150

BLM41PG750SN1
Impedance ()

100
BLM41PG600SN1

Derating of Rated Current

Block Type EMIFILr

50

6000
0
10

100
Frequency (MHz)

1000

3000

Rated Current (mA)

BLM41PG Series (180ohm to 1000ohm)

1200

BLM41PG102SN1

Impedance ()

900

BLM41PG471SN1

3500

2000

600

1500

BLM41PG181SN1

Microwave Absorber

1000
300

0
0

0
1

10

100
Frequency (MHz)

1000

3000

85

125

Operating Temperature (C)

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

77

BLM Series
Power Lines Type Chip Ferrite Bead
BLM41P Series 1806/4516 (inch/mm)

BLM41P

c Impedance-Frequency Characteristics
BLM41PG600SN1

BLM41PG750SN1

200

50

X
25

10

100
Frequency (MHz)

1000

3000

BLM41PG471SN1

Z
75
R
50
X

100
Frequency (MHz)

450

3000

1000

3000

900
Impedance ()

Impedance ()

1000

1200
Z

Chip EMIFILr

100
50

10

150

25

BLM41PG102SN1

600

R
300
X
150

600
R
300

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Impedance ()

Impedance ()

250

100

75

BLM41PG181SN1

125

Impedance ()

Chip Ferrite Bead

1806/4516 (inch/mm)

100

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

78

10

100
Frequency (MHz)

1000

3000

BLE Series

Power Lines Type Chip Ferrite Bead

BLE32P

BLE32P

Series 1210/3225 (inch/mm)

10A max., large current chip ferrite bead inductor.

1210/3225 (inch/mm)
Chip Ferrite Bead

c Equivalent Circuit
2.00.2

c Dimensions

(Resistance element becomes dominant

at high frequencies.)
3.20.2

2.50.2

c Packaging

0.70.3

Code

Packaging

Minimum
Quantity
1500

: Electrode

180mm Reel Embossed Tape

330mm Reel Embossed Tape

7000

Bulk(Bag)

1000

(in mm)

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

Part Number

Impedance
(at 100MHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLE32PN300SN1p

30ohm 10ohm

10000mA

1.6m ohm max.

-55C to +125C

Number of Circuits: 1

c Impedance-Frequency Characteristics
Chip Common Mode Choke Coil

80

Impedance ()

60

BLE32PN300SN1
40

20

0
1

10

100
Frequency (MHz)

1000

3000

Block Type EMIFILr

c Impedance-Frequency Characteristics
BLE32PN300SN1
80

Impedance ()

60

40

R
20
X
1

10

100
Frequency (MHz)

1000

3000

Microwave Absorber

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

79

BLA Series

Signal Lines Type Chip Ferrite Bead

BLA2AA/BLA2AB

BLA2AA/BLA2AB

Series 0804/2010 (inch/mm)

4-line array, 0804 size.

c Equivalent Circuit

(2)

(3)

(4)

(5)

(6)

(7)

(8)

2.00.2

(2)

(3)

(4)

(5)

(6)
(7)
No polarity.

(8)

c Packaging
0.50.1

0.250.15

(1)

1.00.2

(1)

0.20.15

Chip Ferrite Bead

0804/2010 (inch/mm)

c Dimensions

Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

10000

330mm Reel Paper Tape

50000

Bulk(Bag)

1000

0.50.1
: Electrode
(in mm)

Chip Common Mode Choke Coil

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

Part Number

Impedance
(at 100MHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLA2AAG121SN4p

120ohm 25%

100mA

0.50ohm max.

-55C to +125C

BLA2AAG221SN4p

220ohm 25%

50mA

0.70ohm max.

-55C to +125C

BLA2AAG601SN4p

600ohm 25%

50mA

1.10ohm max.

-55C to +125C

BLA2AAG102SN4p

1000ohm 25%

50mA

1.30ohm max.

-55C to +125C

BLA2ABD750SN4p

75ohm 25%

200mA

0.20ohm max.

-55C to +125C

BLA2ABD121SN4p

120ohm 25%

200mA

0.35ohm max.

-55C to +125C

BLA2ABD221SN4p

220ohm 25%

100mA

0.40ohm max.

-55C to +125C

BLA2ABD471SN4p

470ohm 25%

100mA

0.65ohm max.

-55C to +125C

BLA2ABD601SN4p

600ohm 25%

100mA

0.80ohm max.

-55C to +125C

BLA2ABD102SN4p

1000ohm 25%

50mA

1.00ohm max.

-55C to +125C

BLA2ABB100SN4p

10ohm 25%

200mA

0.1ohm max.

-55C to +125C

BLA2ABB220SN4p

22ohm 25%

200mA

0.2ohm max.

-55C to +125C

BLA2ABB470SN4p

47ohm 25%

200mA

0.35ohm max.

-55C to +125C

BLA2ABB121SN4p

120ohm 25%

50mA

0.60ohm max.

-55C to +125C

BLA2ABB221SN4p

220ohm 25%

50mA

0.90ohm max.

-55C to +125C

c Impedance-Frequency Characteristics
BLA2AAG Series

BLA2ABD Series

1200

1600
BLA2ABD102SN4
BLA2AAG102SN4
1200

900

BLA2ABD601SN4

Impedance ()

BLA2AAG601SN
Impedance ()

Block Type EMIFILr

Number of Circuits: 4

BLA2AAG221SN4

600

BLA2AAG121SN4

BLA2ABD471SN4
800
BLA2ABD221SN4
BLA2ABD121SN4

400

300

Microwave Absorber

BLA2ABD750SN4

0
1

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

80

BLA Series
Signal Lines Type Chip Ferrite Bead
BLA2AA/BLA2AB Series 0804/2010 (inch/mm)

BLA2AA/BLA2AB

c Impedance-Frequency Characteristics
BLA2ABB Series
0804/2010 (inch/mm)
Chip Ferrite Bead

1000

BLA2ABB221SN4

Impedance ()

800

BLA2ABB121SN4
600

BLA2ABB470SN4

400

BLA2ABB220SN4
200

BLA2ABB100SN4

0
1

10

100
Frequency (MHz)

1000

3000

BLA2AAG221SN4

200

800

300
Impedance ()

120

1000

80
X

Impedance ()

160
Impedance ()

BLA2AAG601SN4

400

200

100

R
400
X

200

40
0

600

10

100
Frequency (MHz)

1000

3000

BLA2AAG102SN4

10

100
Frequency (MHz)

1000

BLA2ABD750SN4

1250

3000

10

100
Frequency (MHz)

1000

3000

1000

3000

1000

3000

Chip Common Mode Choke Coil

BLA2AAG121SN4

Chip EMIFILr

c Impedance-Frequency Characteristics

BLA2ABD121SN4
300

200
Z

240

750
500

100

180

Z
R

120

50

250

Impedance ()

150
Impedance ()

Impedance ()

1000

60

X
10

100
Frequency (MHz)

1000

3000

BLA2ABD221SN4

100
Frequency (MHz)

1000

3000

Impedance ()

Z
R

200
X

10

100
Frequency (MHz)

400

1000

3000

600

400
X
200

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

Microwave Absorber

100
Frequency (MHz)

800

200

100

10

1000

600

300

BLA2ABD601SN4

800

400
Impedance ()

10

BLA2ABD471SN4

500

Block Type EMIFILr

Impedance ()

Continued on the following page.

!Note

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

81

BLA Series
Signal Lines Type Chip Ferrite Bead
BLA2AA/BLA2AB Series 0804/2010 (inch/mm)

BLA2AA/BLA2AB

c Impedance-Frequency Characteristics

Chip Ferrite Bead

0804/2010 (inch/mm)

BLA2ABD102SN4

BLA2ABB100SN4

BLA2ABB220SN4

50

1600

125
Z

R
800
X

10

100
Frequency (MHz)

1000

3000

R
50
X

10

100
Frequency (MHz)

1000

3000

R
100
X

10

100
Frequency (MHz)

1000

3000

300
R

3000

10

100
Frequency (MHz)

1000

3000

R
400
X
200

1000

3000

Block Type EMIFILr

Microwave Absorber

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

82

1000

600

Chip Common Mode Choke Coil

150

50

100
Frequency (MHz)

800
Impedance ()

Impedance ()

10

1000

450

150

BLA2ABB221SN4

600

200
Impedance ()

75

25

BLA2ABB121SN4

250

Chip EMIFILr

20
10

BLA2ABB470SN4

30

400

100
Impedance ()

Impedance ()

Impedance ()

40

1200

10

100
Frequency (MHz)

BLA Series

Signal Lines Type Chip Ferrite Bead

BLA31A/BLA31B

BLA31A/BLA31B

Series 1206/3216 (inch/mm)

4-line array, 1206 size.

c Equivalent Circuit

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(2)

(3)

(4)

(5)

(6)
(7)
No polarity.

(8)

c Packaging

0.80.2
0.40.2

(1)

1.60.2

0.30.2

(1)

1206/3216 (inch/mm)
Chip Ferrite Bead

c Dimensions

Minimum
Quantity

Code

Packaging

180mm Reel Paper Tape

4000

330mm Reel Paper Tape

10000

Bulk(Bag)

1000

0.80.1
3.20.2
: Electrode
(in mm)

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

Part Number

Impedance
(at 100MHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLA31AG300SN4p

30ohm 25%

200mA

0.10ohm max.

-55C to +125C

BLA31AG600SN4p

60ohm 25%

200mA

0.15ohm max.

-55C to +125C

BLA31AG121SN4p

120ohm 25%

150mA

0.20ohm max.

-55C to +125C

BLA31AG221SN4p

220ohm 25%

150mA

0.25ohm max.

-55C to +125C

BLA31AG601SN4p

600ohm 25%

100mA

0.35ohm max.

-55C to +125C

BLA31AG102SN4p

1000ohm 25%

50mA

0.45ohm max.

-55C to +125C

BLA31BD121SN4p

120ohm 25%

150mA

0.30ohm max.

-55C to +125C

BLA31BD221SN4p

220ohm 25%

150mA

0.35ohm max.

-55C to +125C

BLA31BD471SN4p

470ohm 25%

100mA

0.40ohm max.

-55C to +125C

BLA31BD601SN4p

600ohm 25%

100mA

0.45ohm max.

-55C to +125C

BLA31BD102SN4p

1000ohm 25%

50mA

0.55ohm max.

-55C to +125C

Chip Common Mode Choke Coil

c Rated Value (p: packaging code)

Number of Circuits: 4

c Impedance-Frequency Characteristics
BLA31AG Series

BLA31BD Series

1200

1500

Block Type EMIFILr

1200

Impedance ()

Impedance ()

900
BLA31AG102SN4
BLA31AG601SN4
BLA31AG221SN4
BLA31AG121SN4
BLA31AG600SN4
BLA31AG300SN4

600

900
BLA31BD102SN4
BLA31BD601SN4
BLA31BD471SN4
BLA31BD221SN4
BLA31BD121SN4

600

300
300

0
1

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

Microwave Absorber

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

83

BLA Series
Signal Lines Type Chip Ferrite Bead
BLA31A/BLA31B Series 1206/3216 (inch/mm)

BLA31A/BLA31B

c Impedance-Frequency Characteristics
BLA31AG300SN4

BLA31AG600SN4

160
Z

20
X
10

120
R

40
X
20

10

100
Frequency (MHz)

1000

3000

BLA31AG221SN4

10

100
Frequency (MHz)

1000

80
X

3000

10

100
Frequency (MHz)

3000

1000

3000

1000

3000

1200
Z

Z
Impedance ()

600
R

200

1000

BLA31AG102SN4

800

250
Impedance ()

40

BLA31AG601SN4

300

Chip EMIFILr

Impedance ()

60
Impedance ()

Impedance ()

30

150
100

400

200

900

Impedance ()

Chip Ferrite Bead

1206/3216 (inch/mm)

BLA31AG121SN4

80

40

R
600

300

50

10

100
Frequency (MHz)

1000

BLA31BD121SN4
Chip Common Mode Choke Coil

3000

100
Frequency (MHz)

1000

3000

Impedance ()

Z
150

100
X

10

100
Frequency (MHz)

1000

300

R
200
X

3000

BLA31BD601SN4

600
R

450
300
X
150

10

100
Frequency (MHz)

1000

3000

1000

3000

BLA31BD102SN4

1200

1500
Z

Impedance ()

Impedance ()

Block Type EMIFILr

1250

900

600

300

1000
R
750
500

250

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

Microwave Absorber

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

84

100
Frequency (MHz)

750

100

50

10

900

400

200

BLA31BD471SN4

500

250
Impedance ()

10

BLA31BD221SN4

300

Impedance ()

10

100
Frequency (MHz)

BLM Series

Signal Lines Type Chip Ferrite Bead

BLM03H

BLM03H

Series 0201/0603 (inch/mm)

0201 size for GHz band noise.

c Equivalent Circuit
0.30.03

0.30.03

0.60.03

0201/0603 (inch/mm)
Chip Ferrite Bead

c Dimensions

(Resistance element becomes dominant

at high frequencies.)

0.150.05

c Packaging
Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

15000

330mm Reel Paper Tape

50000

Bulk(Bag)

1000

: Electrode
(in mm)

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

Impedance
(at 100MHz/20C)

Impedance
(at 1GHz/20C)

BLM03HG601SN1p

600ohm 25%

1000ohm 40%

150mA

1.6ohm max.

-55C to +125C

BLM03HG102SN1p

1000ohm 25%

1800ohm 40%

125mA

2.6ohm max.

-55C to +125C

BLM03HG122SN1p

1200ohm 25%

2000ohm 40%

100mA

3.5ohm max.

-55C to +125C

BLM03HD331SN1p

330ohm 25%

750ohm 40%

200mA

1.0ohm max.

-55C to +125C

BLM03HD471SN1p

470ohm 25%

1000ohm 40%

175mA

1.3ohm max.

-55C to +125C

BLM03HD601SN1p

600ohm 25%

1500ohm 40%

150mA

1.7ohm max.

-55C to +125C

BLM03HD102SN1p

1000ohm 25%

2300ohm 40%

120mA

2.9ohm max.

-55C to +125C

BLM03HB191SN1p

190ohm 25%

1150ohm 40%

150mA

2.0ohm max.

-55C to +125C

Rated Current DC Resistance

Chip Common Mode Choke Coil

Operating
Temperature Range

Part Number

Number of Circuits: 1

c Impedance-Frequency Characteristics
BLM03HG Series

BLM03HD Series

2500

2500

2000

2000

1000

1500

BLM03HD601SN1

Block Type EMIFILr

1500

Impedance ()

Impedance ()

BLM03HD102SN1
BLM03HG122SN1
BLM03HG102SN1
BLM03HG601SN1

BLM03HD471SN1
1000
BLM03HD331SN1
500

500

0
1

10

100
Frequency (MHz)

1000

3000

1000

3000

10

100
Frequency (MHz)

1000

3000

BLM03HB Series
1600

Microwave Absorber

Impedance ()

1200

800

BLM03HB191SN1
400

0
1

!Note

10

100
Frequency (MHz)

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

85

BLM Series
Signal Lines Type Chip Ferrite Bead
BLM03H Series 0201/0603 (inch/mm)

BLM03H

c Impedance-Frequency Characteristics
BLM03HG102SN1

600

300

10

100
Frequency (MHz)

1000

1000

10

100
Frequency (MHz)

1000

3000

Z
600
R

100
Frequency (MHz)

1000

3000

1000

3000

BLM03HD601SN1
1800

900

600

1200

R
600

300

10

100
Frequency (MHz)

1000

3000

BLM03HD102SN1

10

100
Frequency (MHz)

1000

3000

BLM03HB191SN1
1600

2500

2000

Z
Impedance ()

1500

1200

1000
X

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

Microwave Absorber

Block Type EMIFILr

R
800

400

500

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

86

10

1200

300

Impedance ()

500

1500

Impedance ()

Impedance ()

Chip EMIFILr

1500

BLM03HD471SN1

900

Chip Common Mode Choke Coil

1000

3000

1200

2000
Z

500

BLM03HD331SN1

2500

1500

Z
Impedance ()

Impedance ()

900

BLM03HG122SN1

2000

Impedance ()

1200

Impedance ()

Chip Ferrite Bead

0201/0603 (inch/mm)

BLM03HG601SN1

10

100
Frequency (MHz)

BLM Series

Universal Type [Power Lines/Signal Lines] Chip Ferrite Bead

BLM03E

BLM03E

Series 0201/0603 (inch/mm)

For GHz band noise and capable of large current.

c Equivalent Circuit
0.30.03

0.30.03

0.60.03

0201/0603 (inch/mm)
Chip Ferrite Bead

c Dimensions

(Resistance element becomes dominant

at high frequencies.)

0.150.05

c Packaging
Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

15000

330mm Reel Paper Tape

50000

Bulk(Bag)

1000

: Electrode
(in mm)

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

Part Number

Impedance
(at 100MHz/20C)

Impedance
(at 1GHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLM03EB250SN1p

25ohm 25%

105ohm 40%

600mA

0.26ohm max.

-55C to +125C

BLM03EB500SN1p

50ohm 25%

255ohm 40%

400mA

0.58ohm max.

-55C to +125C

Number of Circuits: 1

c Notice (Rating)

400

In operating temperature exceeding +85C,

derating of current is necessary for
BLM03E series.
Please apply the derating curve shown in
chart according to the operating
temperature.

300

200
BLM03EB500SN1

Derating of Rated Current

BLM03EB250SN1

700
Rated Current (mA)

100

0
1

10

100
Frequency (MHz)

1000

3000

BLM03EB250SN1

600
500

BLM03EB500SN1

400
300

Block Type EMIFILr

Impedance ()

Chip Common Mode Choke Coil

c Impedance-Frequency Characteristics

200
100
0

50
85 100
125
Operating Temperature (C)

150

c Impedance-Frequency Characteristics
BLM03EB250SN1

BLM03EB500SN1

160

400
Z

80

X
40

Microwave Absorber

300
Impedance ()

Impedance ()

120

200

X
100

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

87

BLM Series

Signal Lines Type Chip Ferrite Bead

BLM15H

BLM15H

Series 0402/1005 (inch/mm)

0402 size for GHz band noise.

c Dimensions

c Equivalent Circuit

0.50.05

Chip Ferrite Bead

0402/1005 (inch/mm)

0.250.1

1.00.05

(Resistance element becomes dominant

at high frequencies.)

0.50.05

c Packaging
Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

10000

330mm Reel Paper Tape

50000

Bulk(Bag)

1000

: Electrode
(in mm)

Chip Common Mode Choke Coil

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

Operating
Temperature Range

Part Number

Impedance
(at 100MHz/20C)

Impedance
(at 1GHz/20C)

BLM15HG601SN1p

600ohm 25%

1000ohm 40%

BLM15HG102SN1p

1000ohm 25%

1400ohm 40%

250mA

1.1ohm max.

-55C to +125C

BLM15HD601SN1p

600ohm 25%

1400ohm 40%

300mA

0.85ohm max.

-55C to +125C

BLM15HD102SN1p

1000ohm 25%

2000ohm 40%

250mA

1.25ohm max.

-55C to +125C

BLM15HD182SN1p

1800ohm 25%

2700ohm 40%

200mA

2.2ohm max.

-55C to +125C

BLM15HB121SN1p

120ohm 25%

500ohm 40%

300mA

0.7ohm max.

-55C to +125C

BLM15HB221SN1p

220ohm 25%

900ohm 40%

250mA

1.0ohm max.

-55C to +125C

Rated Current DC Resistance

300mA

0.7ohm max.

-55C to +125C

Number of Circuits: 1

c Impedance-Frequency Characteristics
BLM15HG Series (For General Signal Lines)

BLM15HD Series (For High Speed Signal Lines)

1800

4000
BLM15HD182SN1

1500
3000

BLM15HG102SN1
Impedance ()

Impedance ()

Block Type EMIFILr

1200
BLM15HG601SN1

900

BLM15HD102SN1
2000

600

BLM15HD601SN1
1000

300

0
1

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

BLM15HB Series (For High Speed Signal Lines)

1200

1000

Impedance ()

Microwave Absorber

800
BLM15HB221SN1
600
BLM15HB121SN1
400

200

0
1

10

100
Frequency (MHz)

1000

3000

Continued on the following page.

!Note

88

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

BLM Series
Signal Lines Type Chip Ferrite Bead
BLM15H Series 0402/1005 (inch/mm)

BLM15H

c Impedance-Frequency Characteristics
BLM15HG102SN1

1200

2000

900

1500

BLM15HD601SN1
0402/1005 (inch/mm)
Chip Ferrite Bead

BLM15HG601SN1

1500

600
R
300

Z
1000

10

100
Frequency (MHz)

1000

3000

BLM15HD102SN1

Z
R

1000

500
0

Impedance ()

Impedance ()

2000
1500

10

10

100
Frequency (MHz)

1000

800

3000

600
Z
R

2000

1000

3000

10

100
Frequency (MHz)

10

3000

R
400
X

200

1000

BLM15HB121SN1

4000

1000

100
Frequency (MHz)

3000

BLM15HD182SN1

2500

R
500
250

Impedance ()

Z
750

500
X

1000

100
Frequency (MHz)

1000

3000

Chip EMIFILr

Impedance ()

Impedance ()

Impedance ()

1250

10

100
Frequency (MHz)

1000

3000

Chip Common Mode Choke Coil

BLM15HB221SN1
1200

Impedance ()

1000
800

R
Z

600
400
X
200

10

100
Frequency (MHz)

1000

3000

Microwave Absorber

Block Type EMIFILr

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

89

BLM Series

Universal Type [Power Lines/Signal Lines] Chip Ferrite Bead

BLM15E

BLM15E

Series 0402/1005 (inch/mm)

For GHz band noise, also capable to large current.

c Dimensions

c Equivalent Circuit

0.50.05

Chip Ferrite Bead

0402/1005 (inch/mm)

0.250.1

1.00.05

(Resistance element becomes dominant

at high frequencies.)

0.50.05

c Packaging
Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

10000

330mm Reel Paper Tape

50000

Bulk(Bag)

1000

: Electrode
(in mm)

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

Part Number

Impedance
(at 100MHz/20C)

Impedance
(at 1GHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLM15EG121SN1p

120ohm 25%

145ohm (Typ.)

1500mA

0.095ohm max.

-55C to +125C

BLM15EG221SN1p

220ohm 25%

270ohm (Typ.)

700mA

0.28ohm max.

-55C to +125C

c Impedance-Frequency Characteristics

c Notice (Rating)

300

In operating temperature exceeding +85C, derating of current is

necessary for BLM15E series.
Please apply the derating curve shown in chart according to the operating
temperature.

200
BLM15EG221SN1
BLM15EG121SN1

Derating of Rated Current

Rated Current (mA)

100

Block Type EMIFILr

10

100
Frequency (MHz)

1000

3000

BLM15EG121SN1
1500
900

85
125
Operating Temperature (C)

Rated Current (mA)

Impedance ()

Chip Common Mode Choke Coil

Number of Circuits: 1

BLM15EG221SN1
700
500

c Impedance-Frequency Characteristics
BLM15EG121SN1

BLM15EG221SN1
300

200

Z
Z

Impedance ()

Microwave Absorber

Impedance ()

150

R
100
X

50

10

100
Frequency (MHz)

1000

3000

200

100

10

100
Frequency (MHz)

1000

3000

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

90

85
125
Operating Temperature (C)

BLM Series

Signal Lines Type Chip Ferrite Bead

BLM15G

BLM15G

Series 0402/1005 (inch/mm)

Available up to high-GHz band noise.

c Dimensions

c Equivalent Circuit

1.00.05

0402/1005 (inch/mm)
Chip Ferrite Bead

0.50.05

0.250.1

(Resistance element becomes dominant

at high frequencies.)

0.50.05

c Packaging
Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

10000

330mm Reel Paper Tape

50000

Bulk(Bag)

1000

: Electrode
(in mm)

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

Operating
Temperature Range

Part Number

Impedance
(at 100MHz/20C)

Impedance
(at 1GHz/20C)

BLM15GG221SN1p

220ohm 25%

600ohm 40%

300mA

0.7ohm max.

-55C to +125C

BLM15GG471SN1p

470ohm 25%

1200ohm 40%

200mA

1.3ohm max.

-55C to +125C

BLM15GA750SN1p

75ohm 25%

1000ohm 40%

200mA

1.3ohm max.

-55C to +125C

Rated Current DC Resistance

Chip Common Mode Choke Coil

Number of Circuits: 1

c Impedance-Frequency Characteristics
2500

Impedance ()

2000

1500
BLM15GG471SN1
BLM15GG221SN1

1000

BLM15GA750SN1

500

0
10

100
Frequency (MHz)

1000

3000

Block Type EMIFILr

c Impedance-Frequency Characteristics
BLM15GG471SN1

Z
R

600
300

10

100
Frequency (MHz)

1000

750
500

3000

Z
1500

1000
X
500

250

X
1

2000
R

1000

Impedance ()

900

Impedance ()

Impedance ()

2500
Z

1250

1200

BLM15GA750SN1

1500

1500

X
1

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

Microwave Absorber

BLM15GG221SN1

3000

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

91

BLM Series

Signal Lines Type Chip Ferrite Bead

BLM18H

BLM18H

Series 0603/1608 (inch/mm)

0603 size for GHz band noise. BLM18HE also supports power lines.
*Please refer to BLM15H for downsizing.

Chip Ferrite Bead

0603/1608 (inch/mm)

c Dimensions

c Equivalent Circuit

0.80.15

0.40.2

1.60.15

(Resistance element becomes dominant

at high frequencies.)

0.80.15

c Packaging
Minimum
Quantity

Code

Packaging

180mm Reel Paper Tape

4000

330mm Reel Paper Tape

10000

Bulk(Bag)

1000

: Electrode
(in mm)

Chip Common Mode Choke Coil

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

Operating
Temperature Range

Part Number

Impedance
(at 100MHz/20C)

Impedance
(at 1GHz/20C)

BLM18HG471SN1p

470ohm 25%

600ohm (Typ.)

200mA

0.85ohm max.

-55C to +125C

Rated Current DC Resistance

BLM18HG601SN1p

600ohm 25%

700ohm (Typ.)

200mA

1.00ohm max.

-55C to +125C

BLM18HG102SN1p

1000ohm 25%

1000ohm (Typ.)

100mA

1.60ohm max.

-55C to +125C

BLM18HE601SN1p

600ohm 25%

600ohm (Typ.)

800mA

0.25ohm max.

-55C to +125C

BLM18HE102SN1p

1000ohm 25%

1000ohm (Typ.)

600mA

0.35ohm max.

-55C to +125C

BLM18HE152SN1p

1500ohm 25%

1500ohm (Typ.)

500mA

0.50ohm max.

-55C to +125C

BLM18HD471SN1p

470ohm 25%

1000ohm (Typ.)

100mA

1.20ohm max.

-55C to +125C

BLM18HD601SN1p

600ohm 25%

1200ohm (Typ.)

100mA

1.50ohm max.

-55C to +125C

BLM18HD102SN1p

1000ohm 25%

1700ohm (Typ.)

50mA

1.80ohm max.

-55C to +125C

BLM18HB121SN1p

120ohm 25%

500ohm 40%

200mA

0.50ohm max.

-55C to +125C

BLM18HB221SN1p

220ohm 25%

1100ohm 40%

100mA

0.80ohm max.

-55C to +125C

BLM18HB331SN1p

330ohm 25%

1600ohm 40%

50mA

1.20ohm max.

-55C to +125C

BLM18HK331SN1p

330ohm 25%

400ohm 40%

200mA

0.50ohm max.

-55C to +125C

BLM18HK471SN1p

470ohm 25%

600ohm 40%

200mA

0.70ohm max.

-55C to +125C

BLM18HK601SN1p

600ohm 25%

700ohm 40%

100mA

0.90ohm max.

-55C to +125C

BLM18HK102SN1p

1000ohm 25%

1200ohm 40%

50mA

1.50ohm max.

-55C to +125C

c Impedance-Frequency Characteristics
BLM18HG Series (For General Signal Lines)

BLM18HE Series (For High Speed Signal Lines)

2500

2000

BLM18HE152SN1

BLM18HG102SN1

Impedance ()

1500

2000

BLM18HG601SN1
BLM18HG471SN1

Impedance ()

Block Type EMIFILr

Number of Circuits: 1

1000

BLM18HE102SN1
1500
BLM18HE601SN1
1000

Microwave Absorber

500
500

0
1

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

92

BLM Series
Signal Lines Type Chip Ferrite Bead
BLM18H Series 0603/1608 (inch/mm)

BLM18H

c Impedance-Frequency Characteristics
BLM18HD Series (For High Speed Signal Lines)

BLM18HB Series (For High Speed Signal Lines)

BLM18HD102SN1

2500

1500

BLM18HD601SN1
2000

BLM18HD471SN1

Impedance ()

Impedance ()

0603/1608 (inch/mm)
Chip Ferrite Bead

2000

3000

1500

BLM18HB331SN1
1000

BLM18HB221SN1

1000

BLM18HB121SN1
500

500

0
10

100
Frequency (MHz)

1000

3000

1500

BLM18HK601SN1

BLM18HK471SN1

3000

BLM18HK331SN1

600

Derating of Rated Current

300

0
100
Frequency (MHz)

1000

3000

600
500
400

c Impedance-Frequency Characteristics
BLM18HG471SN1

BLM18HG102SN1

1200

2000

900
Impedance ()

750
Z
500

R
X

250

10

100
Frequency (MHz)

1500
Z

600

R
X

300

1000

3000

BLM18HE601SN1

10

100
Frequency (MHz)

1000

Impedance ()

600
R
400
X

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

1000

3000

2000
Z

1000
R

2500

500

200

BLM18HE152SN1

1500
Z

1000

3000

2000

800

500

BLM18HE102SN1

1000

85
125
Operating Temperature (C)

BLM18HG601SN1

1000

Block Type EMIFILr

10

Microwave Absorber

Chip Common Mode Choke Coil

Rated Current (mA)

800

Impedance ()

Impedance ()

900

Impedance ()

1000

In operating temperature exceeding +85C,

derating of current is necessary for
BLM18HE series.
Please apply the derating curve shown in
chart according to the operating
temperature.

BLM18HK102SN1

Impedance ()

100
Frequency (MHz)

c Notice (Rating)

BLM18HK Series (For Digital Interface Lines)

1200

10

Chip EMIFILr

Impedance ()

1500
R
1000
X
500

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

Continued on the following page.

!Note

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

93

BLM Series
Signal Lines Type Chip Ferrite Bead
BLM18H Series 0603/1608 (inch/mm)

BLM18H

c Impedance-Frequency Characteristics
BLM18HD601SN1

Impedance ()

1200
Impedance ()

BLM18HD102SN1

2000

1600

800

3000
2500

1500

Impedance ()

Chip Ferrite Bead

0603/1608 (inch/mm)

BLM18HD471SN1

R
1000
X

400

500

2000
R
1500
X

1000
500

10

100
Frequency (MHz)

1000

3000

BLM18HB121SN1

500

10

100
Frequency (MHz)

1000

R
500
X

3000

BLM18HK331SN1

10

100
Frequency (MHz)

1000

Impedance ()

300

300
X

10

100
Frequency (MHz)

1000

3000

1000

3000

600

10

100
Frequency (MHz)

1000

3000

Impedance ()

Block Type EMIFILr

500
X
250

100
Frequency (MHz)

Microwave Absorber

10

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

94

1000

3000

200

3000

750

1000

400

1500

1000

100
Frequency (MHz)

600

BLM18HK102SN1
1250

10

150

R
900

800

450

150

1000
Z

600
Z

3000

BLM18HK601SN1

750

450

1000

1200

3000

BLM18HK471SN1

600

100
Frequency (MHz)

300

Impedance ()

10

1500

750

1800
Z

250

Impedance ()

3000

Impedance ()

Impedance ()

Impedance ()

Chip EMIFILr

1000

BLM18HB331SN1

1000

250

Chip Common Mode Choke Coil

100
Frequency (MHz)

1250

750

10

BLM18HB221SN1

1000

10

100
Frequency (MHz)

BLM18H Series

Testing Circuit

Noise Suppression of BLM18H

in UHF Range

74HCU04

74AC04

Measured radiation at 3m distance

74HC00

Chip Ferrite Bead

EMI
Suppression
Effect

BLM
10MHz

Type of Filter

EMI Suppression Effect / Description

70

Initial
(No filter)

50
40

Chip EMIFILr

Level (dBV/m)

60

30
20
10
300

400

500

600
700
800
Frequency (MHz)

900

1000

70

Level (dBV/m)

Conventional Type
BLM18AG102SN1
(1000 at 100MHz)

Chip Common Mode Choke Coil

Current BLM18AG are effective in

suppressing noise in the range between
300MHz and 700MHz.

60
50
Initial
40
30
20
400

500

600
700
800
Frequency (MHz)

900

1000

70

In addition to the effectiveness of

current BLM, BLM18HG suppresses
noise in the range beyond 700MHz.

Level (dBV/m)

60

for GHz Noise Suppression

BLM18HG102SN1
(1000 at 100MHz)

50

Block Type EMIFILr

10
300

Initial
40
BLM18AG102SN1
30
20
10
300

400

500

600
700
800
Frequency (MHz)

900

1000

Comparison between BLM18HG102SN1 and BLM18AG102SN1 (Current Item)

BLM18HG102SN1

1500

Microwave Absorber

Impedance ()

2000

BLM18AG102SN1
1000

500

0
1

10

100

1000

2000

Frequency (MHz)
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

95

BLM Series

Universal Type [Power Lines/Signal Lines] Chip Ferrite Bead

BLM18E

BLM18E

Series 0603/1608 (inch/mm)

For GHz band noise, also capable to large current.

c Dimensions

c Equivalent Circuit
0.80.15

Chip Ferrite Bead

0603/1608 (inch/mm)

1.60.15

(Resistance element becomes dominant

at high frequencies.)
0.40.2

c Packaging
Part Number

BLM18EGpppTN1

0.50.15

BLM18EGpppSN1

0.80.15

: Electrode
(in mm)

Minimum
Quantity

Code

Packaging

180mm Reel Paper Tape

4000

330mm Reel Paper Tape

10000

Bulk(Bag)

1000

Part Number

Impedance
(at 100MHz/20C)

Impedance
(at 1GHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLM18EG101TN1p

100ohm 25%

140ohm (Typ.)

2000mA

0.045ohm max.

-55C to +125C

BLM18EG121SN1p

120ohm 25%

145ohm (Typ.)

2000mA

0.04ohm max.

-55C to +125C

BLM18EG221SN1p

220ohm 25%

260ohm (Typ.)

2000mA

0.05ohm max.

-55C to +125C

BLM18EG221TN1p

220ohm 25%

300ohm (Typ.)

1000mA

0.15ohm max.

-55C to +125C

BLM18EG331TN1p

330ohm 25%

450ohm (Typ.)

500mA

0.21ohm max.

-55C to +125C

BLM18EG391TN1p

390ohm 25%

520ohm (Typ.)

500mA

0.3ohm max.

-55C to +125C

BLM18EG471SN1p

470ohm 25%

550ohm (Typ.)

500mA

0.21ohm max.

-55C to +125C

BLM18EG601SN1p

600ohm 25%

700ohm (Typ.)

500mA

0.35ohm max.

-55C to +125C

Number of Circuits: 1

c Impedance-Frequency Characteristics

c Notice (Rating)

BLM18EG_TN1 Series

In operating temperature exceeding +85C,

derating of current is necessary for
BLM18EG series.
Please apply the derating curve shown in
chart according to the operating
temperature.

1000

Impedance ()

Block Type EMIFILr

800

BLM18EG391TN1

600

BLM18EG331TN1

Derating of Rated Current

BLM18EG221TN1

400

BLM18EG101TN1
200

0
1

10

100
Frequency (MHz)

1000

3000

BLM18EG_SN1 Series
1000

Impedance ()

Microwave Absorber

2000

1000
500

BLM18EG601SN1
800

Rated Current (mA)

Chip Common Mode Choke Coil

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

BLM18EG471SN1

85

125

Operating Temperature (C)

600

BLM18EG221SN1
BLM18EG121SN1

400

200

0
1

!Note

96

10

100
Frequency (MHz)

1000

3000

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued on the following page.

BLM Series
Universal Type [Power Lines/Signal Lines] Chip Ferrite Bead
BLM18E Series 0603/1608 (inch/mm)

BLM18E

c Impedance-Frequency Characteristics
BLM18EG121SN1

150

BLM18EG221SN1
400

200
Z
160

300

75
X

50

10

100
Frequency (MHz)

1000

10

100
Frequency (MHz)

1000

3000

R
X

100

10

100
Frequency (MHz)

1000

BLM18EG471SN1

10

100
Frequency (MHz)

1000

3000

1000

3000

750
R

300
200

3000

1000

500

Z
R

250

100

Z
Impedance ()

Impedance ()

200

200

BLM18EG391TN1

400
Z

100

500

300
Impedance ()

BLM18EG331TN1

400

10

100
Frequency (MHz)

1000

3000

1000

3000

10

100
Frequency (MHz)

BLM18EG601SN1

800

1000
800
Impedance ()

600
Impedance ()

80

3000

BLM18EG221TN1

R
400
X
200

600

400
X
200

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

Microwave Absorber

Block Type EMIFILr

40

25

120

Chip EMIFILr

Impedance ()

Impedance ()

Impedance ()

Z
100

Chip Common Mode Choke Coil

125

0603/1608 (inch/mm)
Chip Ferrite Bead

BLM18EG101TN1

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

97

BLM Series

Signal Lines Type Chip Ferrite Bead

BLM18G

BLM18G

Series 0603/1608 (inch/mm)

Available up to high-GHz band noise.

c Dimensions

c Equivalent Circuit

0.80.1

Chip Ferrite Bead

0603/1608 (inch/mm)

0.350.15

1.60.1

(Resistance element becomes dominant

at high frequencies.)

0.80.1

c Packaging
Minimum
Quantity

Code

Packaging

180mm Reel Paper Tape

4000

330mm Reel Paper Tape

10000

Bulk(Bag)

1000

: Electrode
(in mm)

Chip EMIFILr

Refer to pages from p.100 to p.103 for mounting information.

c Rated Value (p: packaging code)

Part Number

Impedance
(at 100MHz/20C)

Impedance
(at 1GHz/20C)

Rated Current

DC Resistance

Operating
Temperature Range

BLM18GG471SN1p

470ohm 25%

1800ohm 30%

200mA

1.0ohm 0.3ohm

-55C to +125C

Number of Circuits: 1

c Impedance-Frequency Characteristics

1500
Impedance ()

Chip Common Mode Choke Coil

2000

1000
BLM18GG471SN1

500

0
1

10

100
Frequency (MHz)

1000

3000

Block Type EMIFILr

c Impedance-Frequency Characteristics
BLM18GG471SN1
2000

Impedance ()

1500

1000
Z

500
X
1

10

100
Frequency (MHz)

1000

3000

Microwave Absorber

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

98

Chip Ferrite Bead

!Caution/Notice
!Caution
o Soldering and Mounting
s3ELF HEATING
Please pay special attention when mounting chip
ferrite beads BLM_AX/P/K/S series bead inductor BLE
series in close proximity to other products that radiate
heat.
The heat generated by other products may deteriorate
the insulation resistance and cause excessive heat in
this component.

Chip Ferrite Bead

Chip Ferrite Bead
!Caution/Notice

o Rating
1. About the Rated Current
Do not use products beyond the rated current as this
may create excessive heat and deteriorate the
insulation resistance.
2. About the Excessive Surge Current
Excessive surge current ( pulse current or rush
current) than specified rated current applied to the
product may cause a critical failure, such as an open
circuit, burnout caused by excessive temperature
rise.Please contact us in advance in case of applying
the surge current.

o Handling

<Operating Environment>
Do not use products in a chemical atmosphere such as
chlorine gas, acid or sulfide gas.
Do not use products in the environment close to the
organic solvent.
<Storage and Handling Requirements>
1. Storage Period
BLM15E/15H/15G series should be used within 12
months, the other series should be used within 6
months.
Solderability should be checked if this period is
exceeded.
2. Storage Conditions
 3TORAGETEMPERATURE TO#
Relative humidity: 15 to 85%
Avoid sudden changes in temperature and humidity.
(2) Do not store products in a chemical atmosphere
such as chlorine gas, acid or sulfide gas.

1. Resin Coating
Using resin for coating/molding products may affect
the products performance.
So please pay careful attention in selecting resin.
Prior to use, please make the reliability evaluation with
the product mounted in your application set.
2. Handling of a Substrate
After mounting products on a substrate, do not apply
any stress to the product caused by bending or
twisting to the substrate when cropping the substrate,
inserting and removing a connector from the substrate
or tightening screw to the substrate.
Excessive mechanical stress may cause cracking in
the Product.
Bending

Chip Common Mode Choke Coil

o Storage and Operating Conditions

Chip EMIFILr

Notice

Twisting

o Notice (Soldering and Mounting)

Microwave Absorber

Block Type EMIFILr

1. Cleaning
Failure and degradation of a product are caused
by the cleaning method. When you clean in conditions
that are not in mounting information, please contact
Murata engineering.
2. Soldering
Reliability decreases with improper soldering methods.
Please solder by the standard soldering conditions
shown in mounting information.
3. Other
Noise suppression levels resulting from Murata's EMI
suppression filters EMIFILr may vary, depending on
the circuits and ICs used, type of noise, mounting
pattern, mounting location, and other operating
conditions. Be sure to check and confirm in advance
the noise suppression effect of each filter, in actual
circuits, etc. before applying the filter in a
COMMERCIAL PURPOSEEQUIPMENTDESIGN

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

99

BL p

Soldering and Mounting

Chip Ferrite Bead

1. Standard Land Pattern Dimensions

,AND0ATTERN
3OLDER2ESIST

o2EFLOWAND&LOW
",-3ERIES

A
b

Type

Soldering

BLM02

2EFLOW

     

BLM03

2EFLOW

   



BLM15

2EFLOW

 





&LOW
BLM18 EXCEPT'

 



&LOW
2EFLOW

 



Type

Rated
Current Soldering
(A)

Land Pad Thickness

and Dimension d
18m
35m
70m

4EMPERATURE
#ORLESS

4EMPERATURE
#ORLESS

BLM03AX MAX

BLM03Pp
2EFLOW     

BLM03EB MAX









BLM15AX MAX
BLM15PD
MAX 2EFLOW
BLM15PG
BLM15PX MAX







   





















BLE32PN



&LOW
2EFLOW









 

2EFLOW



s%XCEPTFOR",-0'q08q%"!8q0$q0'q08
0'q+'q3'0'!ND",-'
ISSPECIALLYADAPTEDFORREFLOWSOLDERING

Chip Common Mode Choke Coil

DPATTERN

C
A
b

BLM21

INMM

",%0.q",-pp!80+3%

BLE32
BLM02
BLM03
BLM15
BLM18
BLM21
BLM31
BLM41

Chip EMIFILr

Chip Ferrite
Bead
Soldering
and Mounting
Chip Ferrite Bead

,AND0ATTERN
3OLDER2ESIST



 
BLM18PG  
BLM18KG
 
BLM18SG
 

BLM21PG



&LOW

 

2EFLOW

 





























































 

&LOW
2EFLOW



  





 



 

Block Type EMIFILr



 

BLM41PG








BLM31PG







 

s!BOUTLANDPADTHICKNESSOF",%0.PLEASENOTETHEUPPERLIMITOFTHE
TEMPERATURE
s$ONOTAPPLYNARROWERPATTERNTHANLISTEDABOVETO",-pp!80+3
.ARROWPATTERNCANCAUSEEXCESSIVEHEATOROPENCIRCUIT

BLA2A
BLA31

o2EFLOW3OLDERING
",!!

o2EFLOWAND&LOW
",!

0ITCH





 







Microwave Absorber



0ITCH



s)FTHEREAREHIGHAMOUNTSOFSELF HEATINGONPATTERNTHE

CONTACTPOINTSOF0#"ANDPARTMAYBECOMEDAMAGED
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

100

BLp Chip Ferrite Bead

o PCB Warping
PCB should be designed so that products are not
subjected to the mechanical stress caused by warping
the board.

Soldering and Mounting

Products should be located in the sideways direction

(Length: a<b) to the mechanical stress.

Poor example

Good example

2. Solder Paste Printing and Adhesive Application

When flow soldering the chip ferrite beads and bead
inductor apply the adhesive in accordance with the
following conditions.
If too much adhesive is applied, then it may overflow into
the land or termination areas and yield poor solderability.
In contrast, if insufficient adhesive is applied, or if the
adhesive is not sufficiently hardened, then the chip may
become detached during flow soldering process.

When reflow soldering the chip ferrite beads and bead

inductor the printing must be conducted in accordance
with the following cream solder printing conditions.
If too much solder is applied, the chip will be prone to
damage by mechanical and thermal stress from the PCB
and may crack.
Standard land dimensions should be used for resist and
copper foil patterns.

Chip EMIFILr

Chip Ferrite Bead

Soldering
and Mounting
Chip Ferrite
Bead

(in mm)
Adhesive Application

oEnsure that solder is applied smoothly to a

minimum height of 0.2mm to 0.3mm at the end
surface of the part.
oGuideline of solder paste thickness:
50-80m: BLM02
100-150m: BLM03
100-200m: BLM15/18/21/31/41/BLE32

Chip Solid Inductor

BLA

c
b

Bonding agent
Land

PCB

BLA31 Series
Coating amount is illustrated in the
following diagram.
BLA2A

0.4

a: 2070m
b: 3035m
c: 50105m
a

oGuideline of solder paste thickness:

100-150m: BLA2A
150-200m: BLA31
BLA31

Chip Common Mode Choke Coil

BLM18/21/31/41 Series
(Except for BLM18G Series)
Coating amount is illustrated in the
following diagram.

0.20.3mm min.

BLM
BLE

Solder Paste Printing

Chip Solid Inductor

a: 2070m
b: 3035m
c: 50105m

Block Type EMIFILr

Series

1.75

0.7

0.25

1.5

0.8

0.5 0.5 0.5

0.7

PCB

Bonding Agent
Land

0.25

Microwave Absorber

0.8

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

101

BLp Chip Ferrite Bead

Soldering and Mounting

Chip Ferrite
Bead
Soldering
and Mounting
Chip Ferrite Bead

3. Standard Soldering Conditions

Flux:
o Use Rosin-based flux.
In case of using RA type solder, products should be
cleaned completely with no residual flux.
o Do not use strong acidic flux (with chlorine content
exceeding 0.20wt%)
o Do not use water-soluble flux.

(1) Soldering Methods

Use flow and reflow soldering methods only.
Use standard soldering conditions when soldering chip
ferrite beads and bead inductor.
In cases where several different parts are soldered, each
having different soldering conditions, use those
conditions requiring the least heat and minimum time.
Solder: Use Sn-3.0Ag-0.5Cu solder. Use of Sn-Zn based
solder will deteriorate performance of products.
If using BLA series with Sn-Zn based solder,
please contact Murata in advance.

For additional mounting methods, please contact Murata.

oFlow Soldering Profile

( Sn-3.0Ag-0.5Cu Solder)

T3
T2
t2
Heating

T1

Time (s)

Standard Profile

Pre-heating

Series

Limit Profile
Standard Profile

Pre-heating
t1

Heating

BLM (Except for BLM02/03/15/18G)

BLE
BLA31

Temp. (T1)

Time. (t1)

Temp. (T2)

Time. (t2)

150C

60s min.

250C

4 to 6s

Limit Profile
Cycle
of Flow

Heating
Temp. (T3)

Time. (t2)

2653C

5s max.

2 times
max.

Cycle
of Flow

2 times
max.

oReflow Soldering Profile

(Sn-3.0Ag-0.5Cu Solder)
T4
Temperature (C)

Block Type EMIFILr

Chip Common Mode Choke Coil

Temperature (C)

Chip EMIFILr

(2) Soldering Profile

T2
T1

T3

180
150
Limit Profile
Pre-heating

t1
Standard Profile
t2

90s30s

Time (s)

Microwave Absorber

Standard Profile
Series

Temp. (T1)

BLM
BLE
BLA

Limit Profile

Peak
Cycle
Temperature
of Reflow
(T2)
Time. (t1)

Heating

220C min.

30 to 60s

2453C

2 times
max.

Temp. (T3)

Peak
Cycle
Temperature
of Reflow
(T4)
Time. (t2)

230C min.

60s max.

Heating

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

102

260C/10s

2 times
max.

Temperature of soldering iron tip / Soldering time / Times:

350C max. / 3-4s / 2 times
Do not allow the tip of the soldering iron to directly
contact the chip.
For additional methods of reworking with a soldering iron,
please contact Murata engineering.

4. Cleaning
(a) Alcohol cleaning agent
Isopropyl alcohol (IPA)
(b) Aqueous cleaning agent
Pine Alpha ST-100S
(4) Ensure that flux residue is completely removed.
Component should be thoroughly dried after aqueous
agent has been removed with deionized water.
(5) BLM_G type is processed with resin. On rinsing the
product, using water for ultrasonic cleaning may affect
the resin quality used for the product by water element. In
case of set cleaning conditions, please make sure the
reliability according to the cleaning conditions.

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Following conditions should be observed when cleaning

chip ferrite beads.
(1) Cleaning Temperature: 60C max. (40C max. for
alcohol type cleaner)
(2) Ultrasonic
Output: 20W/liter max.
Duration: 5 minutes max.
Frequency: 28 to 40kHz
(3) Cleaning Agent
The following list of cleaning agents have been tested on
the individual components. Evaluation of final assembly
should be completed prior to production.

Chip Ferrite Bead

Soldering
and Mounting
Chip Ferrite
Bead

(3) Reworking with Solder Iron

The following conditions must be strictly followed when
using a soldering iron.(Except for BLM02 Series)
Pre-heating: 150C 60s min.
Soldering iron power output / Tip diameter:
80W max. / 3mm max.

Soldering and Mounting

Chip EMIFILr

BLp Chip Ferrite Bead

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

103

BL p

Packaging

Chip Ferrite Bead

Minimum Quantity and Dimensions of 8mm Width Paper / Embossed Tape

<Paper>

1.750.1

<Embossed>
c

BLM02/03

d
3 3.50.05
8.00.3

ChipPackaging
Ferrite Bead
Chip Ferrite Bead

2 2.00.05
1 4.00.1 4.00.1 1.5 +0.1
-0

Direction of Feed
b

c: Depth of Cavity
(Embossed Tape)

There are holes in the cavities of the

BLM21BD222SN1/BD272SN1 and BLM31 only. 1.0 +0.3 -0.
BLE32 only. 1.0 +0.2 -0.

c: Total Thickness of Tape

(Paper Tape)

1 BLM02/03/15: 2.00.05

BLM18S/18T/BLA2A: 2.00.1
2 BLA2A/31: 2.00.1
3 BLA2A/31: 3.50.1

Chip EMIFILr

Dimension of the cavity of embossed tape is measured at the bottom side.

180mm Reel

330mm Reel

Paper Tape Embossed Tape Paper Tape Embossed Tape

Bulk

BLM02

0.45

0.25

0.40 max.

20000

1000

BLM03

0.70

0.40

0.55 max.

15000

50000

1000

BLM15

1.15

0.65

0.8 max.

10000

50000

1000

BLM18A/B/P/R/H/G

1.85

1.05

1.1 max.

4000

10000

1000

4000

10000

1000

BLM18EG/KG_TN

Chip Common Mode Choke Coil

Minimum Qty. (pcs.)

Dimensions

Part Number

0.85 max.

1.85

1.05

BLM18S

1.85

1.05

0.90 max.

10000

30000

1000

BLM18T

1.85

1.05

0.90 max.

10000

1000

BLM21

2.25

1.45

1.1 max.

4000

10000

1000

BLM31

3.5

1.9

1.3

0.2

3000

10000

1000

BLM21BD222SN1/272SN1

2.25

1.45

1.3

0.2

3000

10000

1000

BLE32

3.2

2.8

2.3

0.25

1500

7000

1000

BLA2A

2.2

1.2

0.8 max.

10000

50000

1000

BLA31

3.4

1.8

1.1 max.

4000

10000

1000

BLM18EG/KG_SN

1.1 max.

Microwave Absorber

b
+0.3

1.5 -0

+0.1

0.30.1
5.50.05

1.5 -0

12.00.3

2.00.05
4.00.1 4.00.1

1.750.1

Minimum Quantity and Dimensions of 12mm Width Embossed Tape

Block Type EMIFILr

(in mm)

Part Number
BLM41

Dimensions
a

4.8

1.9

1.75

Minimum Qty. (pcs.)

180mm Reel 330mm Reel
2500

Bulk
1000

Direction of Feed
c: Depth of Cavity

Dimension of the cavity is measured at the bottom side.

"Minimum Quantity" means the number of units of each delivery or order. The quantity should be an integral multiple of the "Minimum Quantity."
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

104

8000

(in mm)

Chip Ferrite Bead

Design Kits

oEKEMBL03AL-KIT (Chip Ferrite Beads)

Part Number

Quantity
(pcs.)

Impedance typ.
(at 100MHz, 20 degrees C)

Rated Current
(mA)

DC Resistance
() max.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43

BLM02AX100SN1
BLM02AX700SN1
BLM02AX121SN1
BLM03AG100SN1
BLM03AG700SN1
BLM03AG800SN1
BLM03AG121SN1
BLM03AG241SN1
BLM03AG601SN1
BLM03AG102SN1
BLM03AX100SN1
BLM03AX800SN1
BLM03AX121SN1
BLM03AX241SN1
BLM03AX601SN1
BLM03AX102SN1
BLM03BB100SN1
BLM03BB220SN1
BLM03BB470SN1
BLM03BB750SN1
BLM03BB121SN1
BLM03BD750SN1
BLM03BD121SN1
BLM03BD241SN1
BLM03BD471SN1
BLM03BD601SN1
BLM03BC330SN1
BLM03BC560SN1
BLM03BC800SN1
BLM03EB250SN1
BLM03EB500SN1
BLM03HG601SN1
BLM03HG102SN1
BLM03HB191SN1
BLM03HD331SN1
BLM03HD471SN1
BLM03HD601SN1
BLM03HD102SN1
BLM03PG220SN1
BLM03PG330SN1
BLM03PX220SN1
BLM03PX330SN1
BLM03PX800SN1

20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20

105
7025%
12025%
10 (Typ.)
70 (Typ.)
8025%
12025%
24025%
60025%
100025%
10 (Typ.)
8025%
12025%
24025%
60025%
100025%
1025%
2225%
4725%
7525%
12025%
7525%
12025%
24025%
47025%
60025%
3325%
5625%
8025%

750
300
250
500
200
200
200
200
100
100
1000
500
450
350
250
200
300
200
200
200
100
300
250
200
215
200
150
100
100

2525%
5025%
60025%
100025%
19025%
33025%
47025%
60025%
100025%
2225%
3325%
2225%
3325%
8025%

600
400
150
125
150
200
175
150
120
900
750
1800
1500
1000

0.07
0.4
0.5
0.1
0.4
0.4
0.5
0.8
1.5
2.5
0.05
0.18
0.23
0.38
0.85
1.25
0.4
0.5
0.7
1.0
1.5
0.4
0.5
0.8
1.5
1.7
0.85
1.05
1.40
0.26
0.58
1.6
2.6
2.0
1.0
1.3
1.7
2.9
0.065
0.090
0.040
0.055
0.130

Block Type EMIFILr

Chip Common Mode Choke Coil

Chip EMIFILr

No.

Chip Ferrite Bead

Design
Chip
FerriteKits
Bead

BL p

No.

Part Number

Quantity
(pcs.)

Impedance typ.
(at 100MHz, 20 degrees C)

Rated Current
(mA)

DC Resistance
() max.

1
2
3
4
5
6
7
8

BLM15AG100SN1
BLM15AG700SN1
BLM15AG121SN1
BLM15AG221SN1
BLM15AG601SN1
BLM15AG102SN1
BLM15AX100SN1
BLM15AX300SN1

20
20
20
20
20
20
20
20

10 (Typ.)
70 (Typ.)
12025%
22025%
60025%
100025%
105
3025%

1000
600
550
450
300
300
1740
1100

0.025
0.15
0.19
0.29
0.52
0.65
0.015
0.06

Continued on the following page.

!Note

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

105

Microwave Absorber

oEKEMBL15AR-KIT (Chip Ferrite Beads)

BLp Chip Ferrite Bead Design Kits

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Chip EMIFILr

Chip
FerriteKits
Bead
Design
Chip Ferrite Bead

Continued from the preceding page.

No.

Part Number

Quantity
(pcs.)

Impedance typ.
(at 100MHz, 20 degrees C)

Rated Current
(mA)

DC Resistance
() max.

9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68

BLM15AX700SN1
BLM15AX121SN1
BLM15AX221SN1
BLM15AX601SN1
BLM15AX102SN1
BLM15BA050SN1
BLM15BA100SN1
BLM15BA220SN1
BLM15BA330SN1
BLM15BA470SN1
BLM15BA750SN1
BLM15BB050SN1
BLM15BB100SN1
BLM15BB220SN1
BLM15BB470SN1
BLM15BB750SN1
BLM15BB121SN1
BLM15BB221SN1
BLM15BC121SN1
BLM15BC241SN1
BLM15BD750SN1
BLM15BD121SN1
BLM15BD221SN1
BLM15BD471SN1
BLM15BD601SN1
BLM15BD102SN1
BLM15BD182SN1
BLM15BX750SN1
BLM15BX121SN1
BLM15BX221SN1
BLM15BX471SN1
BLM15BX601SN1
BLM15BX102SN1
BLM15BX182SN1
BLM15HD601SN1
BLM15HD102SN1
BLM15HD182SN1
BLM15HG601SN1
BLM15HG102SN1
BLM15HB121SN1
BLM15HB221SN1
BLM15EG121SN1
BLM15EG221SN1
BLM15GG221SN1
BLM15GG471SN1
BLM15GA750SN1
BLM15PG100SN1
BLM15PD300SN1
BLM15PD600SN1
BLM15PD800SN1
BLM15PD121SN1
BLM15PX330SN1
BLM15PX600SN1
BLM15PX800SN1
BLM15PX121SN1
BLM15PX181SN1
BLM15PX221SN1
BLM15PX331SN1
BLM15PX471SN1
BLM15PX601SN1

20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20

7025%
12025%
22025%
60025%
100025%
525%
1025%
2225%
3325%
4725%
7525%
525%
1025%
2225%
4725%
7525%
12025%
22025%
12025%
24025%
7525%
12025%
22025%
47025%
60025%
100025%
180025%
7525%
12025%
22025%
47025%
60025%
100025%
180025%
60025%
100025%
180025%
60025%
100025%
12025%
22025%
12025%
22025%
22025%
47025%
7525%
10 (Typ.)
3025%
6025%
8025%
12025%
3325%
6025%
8025%
12025%
18025%
22025%
33025%
47025%
60025%

780
700
600
500
350
300
300
300
300
200
200
500
300
300

0.10
0.13
0.18
0.34
0.49
0.10
0.20
0.30
0.40
0.60
0.80
0.08
0.10
0.20

300
300
300
200
350
250
300
300
300
200
200
200
100
600
600
450
350
350
300
250
300
250
200
300
250
300
250
1500
700
300
200
200
1000
2200
1700
1500
1300
3000
2500
2300
2000
1500
1400
1200
1000
900

0.35
0.40
0.55
0.80
0.45
0.70
0.20
0.30
0.40
0.60
0.65
0.90
1.40
0.15
0.17
0.27
0.41
0.46
0.65
0.90
0.85
1.25
2.20
0.70
1.10
0.70
1.00
0.095
0.28
0.70
1.30
1.30
0.025
0.035
0.06
0.07
0.09
0.022
0.032
0.038
0.055
0.090
0.10
0.15
0.20
0.23

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

106

BLp Chip Ferrite Bead Design Kits

21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58

BLM18BB221SN1
BLM18BB331SN1
BLM18BB471SN1
BLM18BD470SN1
BLM18BD121SN1
BLM18BD151SN1
BLM18BD221SN1
BLM18BD331SN1
BLM18BD421SN1
BLM18BD471SN1
BLM18BD601SN1
BLM18BD102SN1
BLM18BD152SN1
BLM18BD182SN1
BLM18BD222SN1
BLM18BD252SN1
BLM18PG300SN1
BLM18PG330SN1
BLM18PG600SN1
BLM18PG121SN1
BLM18PG181SN1
BLM18PG221SN1
BLM18PG331SN1
BLM18PG471SN1
BLM18KG260TN1
BLM18KG300TN1
BLM18KG700TN1
BLM18KG101TN1
BLM18KG121TN1
BLM18KG221SN1
BLM18KG331SN1
BLM18KG471SN1
BLM18KG601SN1
BLM18SG260TN1
BLM18SG700TN1
BLM18SG121TN1
BLM18SG221TN1
BLM18SG331TN1

Rated Current
(mA)
500
500
500
500
500
500
400
500
500
300
300
200
700
700
600
550
550
500
500
450

DC Resistance
() max.
0.18
0.25
0.25
0.30
0.35
0.38
0.50
0.20
0.25
0.55
0.70
0.90
0.05
0.10
0.20
0.25
0.25
0.30
0.30
0.37

450
400
300
500
200
200
200
200
200
200
200
100
50
50
50
50
1000
3000
500
2000
1500
1400
1200
1000
6000
5000
3500
3000
3000
2200
1700
1500
1300
6000
4000
3000
2500
1500

0.45
0.58
0.85
0.30
0.40
0.40
0.45
0.50
0.55
0.55
0.65
0.85
1.20
1.50
1.50
1.50
0.05
0.025
0.10
0.05
0.09
0.10
0.15
0.20
0.007
0.010
0.022
0.030
0.030
0.050
0.080
0.130
0.150
0.007
0.020
0.025
0.040
0.070

oEKEMBL8GAB-KIT (Chip Ferrite Beads / for High Frequency Type)

No.

Part Number

Quantity
(pcs.)

1
2
3

BLM18HG471SN1
BLM18HG601SN1
BLM18HG102SN1

20
20
20

Impedance
Impedance
Rated Current DC Resistance
(at 100MHz, 20 degrees C) (at 1GHz, 20 degrees C)
(mA)
() max.
47025%
60025%
100025%

600 (Typ.)
700 (Typ.)
1000 (Typ.)

200
200
100

0.85
1.00
1.60

Continued on the following page.

!Note

Chip EMIFILr

BLM18AG121SN1
BLM18AG151SN1
BLM18AG221SN1
BLM18AG331SN1
BLM18AG471SN1
BLM18AG601SN1
BLM18AG102SN1
BLM18BA050SN1
BLM18BA100SN1
BLM18BA470SN1
BLM18BA750SN1
BLM18BA121SN1
BLM18BB050SN1
BLM18BB100SN1
BLM18BB220SN1
BLM18BB470SN1
BLM18BB600SN1
BLM18BB750SN1
BLM18BB121SN1
BLM18BB151SN1

Impedance typ.
(at 100MHz, 20 degrees C)
12025%
15025%
22025%
33025%
47025%
60025%
100025%
525%
1025%
4725%
7525%
12025%
525%
1025%
2225%
4725%
6025%
7525%
12025%
15025%
22025%
33025%
47025%
4725%
12025%
15025%
22025%
33025%
42025%
47025%
60025%
100025%
150025%
180025%
220025%
250025%
30 (Typ.)
3325%
60 (Typ.)
12025%
18025%
22025%
33025%
47025%
2625%
3025%
7025%
10025%
12025%
22025%
33025%
47025%
60025%
2625%
7025%
12025%
22025%
33025%

Chip Common Mode Choke Coil

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

Quantity
(pcs.)
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20

Block Type EMIFILr

Part Number

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

107

Microwave Absorber

No.

Chip Ferrite Bead

Design
Chip
FerriteKits
Bead

oEKEMBL18AJ-KIT (Chip Ferrite Beads)

BLp Chip Ferrite Bead Design Kits

Chip EMIFILr

Chip
FerriteKits
Bead
Design
Chip Ferrite Bead

Continued from the preceding page.

No.

Part Number

Quantity
(pcs.)

4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25

BLM18HB121SN1
BLM18HB221SN1
BLM18HB331SN1
BLM18HD471SN1
BLM18HD601SN1
BLM18HD102SN1
BLM18HE601SN1
BLM18HE102SN1
BLM18HE152SN1
BLM18HK331SN1
BLM18HK471SN1
BLM18HK601SN1
BLM18HK102SN1
BLM18EG101TN1
BLM18EG121SN1
BLM18EG221TN1
BLM18EG221SN1
BLM18EG331TN1
BLM18EG391TN1
BLM18EG471SN1
BLM18EG601SN1
BLM18GG471SN1

20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20

Impedance
Impedance
Rated Current DC Resistance
(at 100MHz, 20 degrees C) (at 1GHz, 20 degrees C)
(mA)
() max.
12025%
22025%
33025%
47025%
60025%
100025%
60025%
100025%
150025%
33025%
47025%
60025%
100025%
10025%
12025%
22025%
22025%
33025%
39025%
47025%
60025%
47025%

200
100
50
100
100
50
800
600
500
200
200
100
50
2000
2000
1000
2000
500
500
500
500
200

50040%
110040%
160040%
1000 (Typ.)
1200 (Typ.)
1700 (Typ.)
600 (Typ.)
1000 (Typ.)
1500 (Typ.)
400 (Typ.)
600 (Typ.)
700 (Typ.)
1200 (Typ.)
140 (Typ.)
145 (Typ.)
300 (Typ.)
260 (Typ.)
450 (Typ.)
520 (Typ.)
550 (Typ.)
700 ( Typ.)
180030%

0.50
0.80
1.20
1.20
1.50
1.80
0.25
0.35
0.50
0.50
0.70
0.90
1.50
0.045
0.04
0.15
0.05
0.21
0.30
0.21
0.35
1.30

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

oEKEMBL21AF-KIT (Chip Ferrite Beads / for Large-current P Type)

No.

Part Number

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39

BLM21AG121SN1
BLM21AG151SN1
BLM21AG221SN1
BLM21AG331SN1
BLM21AG471SN1
BLM21AG601SN1
BLM21AG102SN1
BLM21BB050SN1
BLM21BB600SN1
BLM21BB750SN1
BLM21BB121SN1
BLM21BB221SN1
BLM21BB331SN1
BLM21BB471SN1
BLM21BD121SN1
BLM21BD221SN1
BLM21BD421SN1
BLM21BD471SN1
BLM21BD601SN1
BLM21BD102SN1
BLM21BD152SN1
BLM21BD182SN1
BLM21BD222SN1
BLM21BD222TN1
BLM21BD272SN1
BLM21PG220SN1
BLM21PG300SN1
BLM21PG600SN1
BLM21PG121SN1
BLM21PG221SN1
BLM21PG331SN1
BLM31PG330SN1
BLM31PG500SN1
BLM31PG121SN1
BLM31PG391SN1
BLM31PG601SN1
BLM41PG600SN1
BLM41PG750SN1
BLM41PG181SN1

Quantity
(pcs.)
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20

Impedance typ.
(at 100MHz, 20 degrees C)

Rated Current
(mA)

DC Resistance
() max.

12025%
15025%
22025%
33025%
47025%
60025%
100025%
525%
6025%
7525%
12025%
22025%
33025%
47025%
12025%
22025%
42025%
47025%
60025%
100025%
150025%
180025%
2250 (Typ.)
220025%
270025%
2225%
30 (Typ.)
6025%
12025%
22025%
33025%
3325%
50 (Typ.)
12025%
39025%
60025%
60 (Typ.)
75 (Typ.)
18025%

800
800
800
700
700
600
500
1000
800
700
600
500
400
400
200
200
200
200
200
200
200
200
200
200
200
6000
4000
3500
3000
2000
1500
6000
3500
3500
2000
1500
6000
3500
3500

0.10
0.10
0.13
0.16
0.19
0.21
0.28
0.02
0.13
0.16
0.19
0.26
0.33
0.40
0.25
0.25
0.30
0.35
0.35
0.40
0.45
0.50
0.60
0.60
0.80
0.009
0.014
0.02
0.03
0.045
0.07
0.009
0.015
0.02
0.05
0.08
0.009
0.015
0.02

Continued on the following page.

!Note

108

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

BLp Chip Ferrite Bead Design Kits

Continued from the preceding page.

Part Number

40
41

BLM41PG471SN1
BLM41PG102SN1

Quantity
(pcs.)
20
20

Impedance typ.
(at 100MHz, 20 degrees C)

Rated Current
(mA)

DC Resistance
() max.

47025%
100025%

2000
1500

0.05
0.09

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Chip EMIFILr

Chip Ferrite Bead

Design
Chip
FerriteKits
Bead

No.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

109

Memo

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

110

Chip Ferrite Bead

NF

p
112

Part Numbering

114

Series Line Up

117

Product Detail

121

!Caution/Notice

154

Soldering and Mounting

156

Packaging

163

Design Kits

165

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Series Introduction

Chip EMIFILr

Chip EMIFILr

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

NFp

Series Introduction

Chip Ferrite Bead

Example of 3-Terminal Capacitor Structure

Ground Terminal

Output (Input) Terminal

Chip 3-terminal capacitor is a chip-shaped 3-terminal capacitor

designed for noise suppression. Its inner structure, like a
feed-through capacitor, makes its ground impedance quite low.
Owing to this structure, the 3-terminal capacitor has a good noise
suppression effect at a high frequency range up to several
hundred MHz.
Ground Terminal

Input (Output) Terminal

Ground Terminal

Chip EMIFILr

Inner Feed
Through
Electrode

Cross Section

Series

Equivalent
Circuit

Part Number

Chip Common Mode Choke Coil

NFM18CC
NFM21CC

NFM Series
(3-terminal capacitor)

NFM18PC
NFM18PS
NFM21PC

NFL15ST
NFL18ST

NFL18SP

NFL / NFW
Series
Block Type EMIFILr

(LC filter)

NFL21SP
NFW31SP
NFA21SL
NFA18SL
NFA18SD

NFR Series
Microwave Absorber

(RC filter)

NFE Series
Feed through
capacitor with ferrite
cores

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

112

NFR21GD
NFA31GD

NFE31PT
NFE61PT

NFp Series Introduction

Chip Ferrite Bead

10
Insertion Loss (dB)

20
Multilayer Capacitor
1608mm Size 1F

30
40
50
60

3-Terminal Capacitor
1608mm Size 1F
NFM18PS105

70
80
90

0.1

10

100

1000

Insertion Loss
Sample

Features

Classification

Applications

Chip EMIFILr

Frequency (MHz)

Example

NFM_CC

Standard type with

varied capacitance

Noise suppression in
low speed signal lines

Low speed interface lines

Sensor

NFM_PC

Meet large current, high

capacitance available,
for power lines

Noise suppression in
power lines

Individual IC power lines

NFL_ST

T-type filter, effective in

low impedance circuits

NFL_SP

-type filter, effective in

high impedance circuits
-type filter, designed
for low impedance
circuits

NFA_SL

4-line array, suitable for

bus lines or flat cables

Limit noise using

resistor, also loop
back to ground

Noise suppression in
signal line with unstable
ground

Interface lines
Clock lines

Meets large
current, good high
frequency
performance
because of its feed
through structure

Noise suppression in
power lines / low
impedance lines

Various power lines

Sensor

Block Type EMIFILr

NFW_SP

Noise suppression in
high speed signal lines

High speed interface lines

Bus lines
LCD lines
Camera I/Fs
High speed analog lines
RGB / D terminal

Microwave Absorber

Sharp insertion
loss curve enables
low damage to
signal waveform

Chip Common Mode Choke Coil

Standard of 3terminal capacitor

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

113

NFp

Part Numbering

Chip EMIFILr

Capacitor

Chip Ferrite Bead

(Part Number)

NF

3D

CC

102

1H

u i o

qProduct ID

*NFAppSL/SD Series, please refer to p.116 (LC Combined (2)).

*NFAppGD Series, please refer to p.116 (RC Combined).

yCharacteristics

Product ID
NF

Chip EMIFILr

wStructure

Code

Capacitance Temperature Characteristics

10%, 12.5%, +10/-13%

22%

+22/-33%

Structure

+30/-80%, +30/-84%

Capacitor Type

15%, +15/-18%

Capacitor Array Type

-750 120ppm/C

+350 to -1000ppm/C

Code

Chip Common Mode Choke Coil

Chip EMIFILr

eDimensions (LgW)
Code

Dimensions (LgW)

EIA

uRated Voltage

15

1.0g0.5mm

0402

Code

Rated Voltage

18

1.6g0.8mm

0603

0E

2.5V

21

2.0g1.25mm

0805

0G

4V

3D

3.2g1.25mm

1205

0J

6.3V

31

3.2g1.6mm

1206

1A

10V

41

4.5g1.6mm

1806

1C

16V

1E

25V

1H

50V

2A

100V

rFeatures
Code

Features

CC

Capacitor Type for Signal Lines

iElectrode/Others (NFM Series)

PC

Capacitor Type for Large Current

PS

High Insertion Loss Type for Large Current

Code

Electrode

Series

KC

Capacitor Type for Very Large Current

Sn Plating

NFM

tCapacitance
Expressed by three figures. The unit is in pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros that follow the two figures.

iNumber of Circuits (NFAppCC Series)

Code

Number of Circuits

4 Circuits

Code

Packaging

Embossed Taping (180mm Reel)

Bulk

Paper Taping (180mm Reel)

Series
NFM3D/NFM31/NFM41
All series
NFM15/NFM18/NFM21/NFAppCC

Microwave Absorber

Block Type EMIFILr

oPackaging

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

114

NFp Chip EMIFILr Part Numbering

LC Combined (1)
L

18 ST

X 1C

107

y u i o

qProduct ID

yCharacteristics (NFL/NFW Series)

Product ID
Chip EMIFILr

wStructure

Code

Characteristics

H/X

Cut-off Frequency

yCharacteristics (NFE Series)

Code

Structure

Code

Wire Wound, LC Combined Type

10%

Multilayer, LC Combined Type

20%, 22%

Block, LC Combined Type

+20/-30%, +22/-33%

+20/-55%, +22/-56%

+30/-80%, +22/-82%

eDimensions (LgW)

Capacitance Temperature Characteristics

Code

Dimensions (LgW)

EIA

15%

15

1.0g0.5mm

0402

-750 120ppm/ C

18

1.6g0.8mm

0603

Other

21

2.0g1.25mm

0805

31

3.2g1.6mm

1206

61

6.8g1.6mm

2706

uRated Voltage
Code

Rated Voltage

1A

10V

1C

16V

Features

1E

25V

SP

Circuit for Signal Lines

1H

50V

ST

T Circuit for Signal Lines

2A

100V

PT

T Circuit for Large Current

rFeatures
Code

Chip EMIFILr

NF

Chip Ferrite Bead

NF

Chip Common Mode Choke Coil

(Part Number)

iElectrode
tCut-off Frequency (NFL/NFW Series)
Expressed by three figures. The unit is in hertz (Hz). The first and
second figures are significant digits, and the third figure expresses
the number of zeros that follow the two figures.

Code

Electrode

Series

3/7

Sn Plating

NFL

Lead Free Solder Coating

NFW

Others

NFE

Block Type EMIFILr

tCapacitance (NFE Series)

Expressed by three figures. The unit is in pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros that follow the two figures.
oPackaging
Code

Packaging

Embossed Taping (330mm Reel)

NFW31/NFE
NFW31/NFE

Embossed Taping (180mm Reel)

Bulk

Paper Taping (180mm Reel)

NFL18/NFL21/NFE
NFL15/NFL18/NFL21

Microwave Absorber

L
B

Series

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

115

NFp Chip EMIFILr Part Numbering

LC Combined (2)

Chip Ferrite Bead

(Part Number)

NF

21

SL

207

1A

u i o !0

qProduct ID

*NFAppCC Series, please refer to p.114.

*NFAppGD Series, please refer to p.116 (RC Combined).

yFeatures (2)

Product ID

Code

NF

Chip EMIFILr

Chip EMIFILr

Expressed by a letter

wStructure
Code

Structure

Array Type

uRated Voltage

eDimensions (LgW)

Chip Common Mode Choke Coil

Features

Code

Rated Voltage

1A

10V

iNumber of Circuits

Code

Dimensions (LgW)

EIA

18

1.6g0.8mm

0603

Code

Number of Circuits

21

2.0g1.25mm

0805

4 Circuits

rFeatures (1)

oDimensions (T)

Code

Features

Code

Dimensions (T)

SL

L Circuit for Signal Lines

Low Profile

SD

L Circuit for Differential Signal

Standard

tCut-off Frequency
Expressed by three figures. The unit is in hertz (Hz). The first and
second figures are significant digits, and the third figure
expresses the number of zeros that follow the two figures.

!0Packaging
Code

Packaging

Bulk

Embossed Taping (180mm Reel)

RC Combined
(Part Number)

NF

21 GD 470

w e

470

u i

qProduct ID

tCapacitance
Expressed by three figures. The unit is in pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros that follow the two figures.

Product ID
NF

Chip EMIFILr

wStructure

Block Type EMIFILr

*NFAppCC Series, please refer to p.114.

*NFAppSL/SD Series, please refer to p.116 (LC Combined (2)).

Code

Structure

RC Combined Type

RC Combined Array Type

yResistance
Expressed by three-digit alphanumerics. The unit is in ohm ().
The first and second figures are significant digits, and the third
figure expresses the number of zeros that follow the two figures. If
there is a decimal point, it is expressed by the capital letter "R." In
this case, all figures are significant digits.

eDimensions (LgW)
Dimensions (LgW)

EIA

21

2.0g1.25mm

0805

Code

Electrode

31

3.2g1.6mm

1206

Sn Plating

rFeatures

Microwave Absorber

uElectrode/Others (NFR Series)

Code

uNumber of Circuits (NFAppGD Series)

Code

Features

Code

Number of Circuits

GD

RC Combined Type for Signal Lines

4 Circuits

iPackaging
Code

Packaging

Embossed Taping (180mm Reel)

Bulk

Paper Taping (180mm Reel)

Series
NFR
All Series
NFAppGD

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

116

p135

0603
(1608)

p136

0805
(2012)
Capacitor Type
for Signal Lines
p137

1205
(3212)

p138

1806
(4516)

p139

Capacitor
Array Type
for Signal Lines

1206
(3216)

0.4
0.4
0.4
0.4
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8

Rated
Voltage

Capacitance

Nominal
Cut-off
Frequency

Rated
Current

NFM15CC222D1A3
NFM15CC222D1C3
NFM15CC223C1A3
NFM15CC223C1C3
NFM18CC220U1C3
NFM18CC470U1C3
NFM18CC101R1C3
NFM18CC221R1C3
NFM18CC471R1C3
NFM18CC102R1C3
NFM18CC222R1C3
NFM18CC223R1C3
NFM21CC220U1H3
NFM21CC470U1H3
NFM21CC101U1H3
NFM21CC221R1H3
NFM21CC471R1H3
NFM21CC102R1H3
NFM21CC222R1H3
NFM21CC223R1H3
NFM3DCC220U1H3
NFM3DCC470U1H3
NFM3DCC101U1H3
NFM3DCC221R1H3
NFM3DCC471R1H3
NFM3DCC102R1H3
NFM3DCC222R1H3
NFM3DCC223R1H3
NFM41CC220U2A3
NFM41CC470U2A3
NFM41CC101U2A3
NFM41CC221U2A3
NFM41CC471R2A3
NFM41CC102R2A3
NFM41CC222R2A3
NFM41CC223R2A3
NFA31CC220S1E4
NFA31CC470S1E4
NFA31CC101S1E4
NFA31CC221S1E4
NFA31CC471R1E4
NFA31CC102R1E4
NFA31CC222R1E4
NFA31CC223R1C4

10Vdc
16Vdc
10Vdc
16Vdc
16Vdc
16Vdc
16Vdc
16Vdc
16Vdc
16Vdc
16Vdc
16Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
100Vdc
100Vdc
100Vdc
100Vdc
100Vdc
100Vdc
100Vdc
100Vdc
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
16Vdc

2200pF+20%-20%
2200pF+20%-20%
22000pF+20%-20%
22000pF+20%-20%
22pF+20%-20%
47pF+20%-20%
100pF+20%-20%
220pF+20%-20%
470pF+20%-20%
1000pF+20%-20%
2200pF+20%-20%
22000pF+20%-20%
22pF+20%-20%
47pF+20%-20%
100pF+20%-20%
220pF+20%-20%
470pF+20%-20%
1000pF+20%-20%
2200pF+20%-20%
22000pF+20%-20%
22pF+50%-20%
47pF+50%-20%
100pF+50%-20%
220pF+50%-20%
470pF+50%-20%
1000pF+50%-20%
2200pF+50%-20%
22000pF+50%-20%
22pF+50%-20%
47pF+50%-20%
100pF+50%-20%
220pF+50%-20%
470pF+50%-20%
1000pF+50%-20%
2200pF+50%-20%
22000pF+50%-20%
22pF+20%-20%
47pF+20%-20%
100pF+20%-20%
220pF+20%-20%
470pF+20%-20%
1000pF+20%-20%
2200pF+20%-20%
22000pF+20%-20%

1A
1A
1A
1A
400mA
400mA
500mA
500mA
500mA
600mA
700mA
1000mA
700mA
700mA
700mA
700mA
1000mA
1000mA
1000mA
2000mA
300mA
300mA
300mA
300mA
300mA
300mA
300mA
300mA
300mA
300mA
300mA
300mA
300mA
300mA
300mA
300mA
200mA
200mA
200mA
200mA
200mA
200mA
200mA
200mA

Chip Ferrite Bead

p134

0402
(1005)

Part Number

Chip EMIFILr

Size Code Thickness

in nch (in mm) (mm)

Series Line Up

Chip Common Mode Choke Coil

Type

Chip EMIFILr

Microwave Absorber

Continued on the following page.

Block Type EMIFILr

NFp

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

117

NFp Chip EMIFILr Series Line Up

Type

Size Code Thickness

in nch (in mm) (mm)
p123

Chip Ferrite Bead

0402
(1005)

p125

p126

Chip EMIFILr

0603
(1608)

Capacitor Type
for Power Lines

p128
p129

0805
(2012)

Chip Common Mode Choke Coil

1205 p130
(3212)
p131
p132

1206
(3216)

p133

1806
(4516)

Block Type EMIFILr

p121

1206
(3216)

LC Combined Type
for Power Lines
and Signal Lines

p122

Microwave Absorber

2706
(6816)

0.4
0.4
0.4
0.4
0.4
0.4
0.3
0.3
0.3
0.4
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.6
0.8
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.7
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.0
1.0
1.0
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6

Part Number

Rated
Voltage

Capacitance

Nominal
Cut-off
Frequency

Rated
Current

NFM15PC473C1A3
NFM15PC473C1C3
NFM15PC104D0J3
NFM15PC104R1A3
NFM15PC224D0J3
NFM15PC224R1A3
NFM15PC474D0G3
NFM15PC474R0J3
NFM15PC105R0G3
NFM15PC435R0E3
NFM18PS474R0J3
NFM18PS105D0J3
NFM18PS105R0J3
NFM18PC104R1C3
NFM18PC224R0J3
NFM18PC474R0J3
NFM18PC105R0J3
NFM18PC225B0J3
NFM18PC225B1A3
NFM21PS106B0J3
NFM21PC104R1E3
NFM21PC224R1C3
NFM21PC474R1C3
NFM21PC105B1A3
NFM21PC105B1C3
NFM21PC225B0J3
NFM21PC475B1A3
NFM3DPC223R1H3
NFM31PC276B0J3
NFM31KC103R1H3
NFM31KC103R2A3
NFM31KC153R1H3
NFM31KC153R2A3
NFM31KC223R1H3
NFM31KC223R2A3
NFM31KC104R1H3
NFM31KC104R2A3
NFM41PC204F1H3
NFM41PC155B1E3
NFM41PC155B1H3
NFE31PT220R1E9
NFE31PT470C1E9
NFE31PT101C1E9
NFE31PT221D1E9
NFE31PT471F1E9
NFE31PT152Z1E9
NFE31PT222Z1E9
NFE61PT330B1H9
NFE61PT680B1H9
NFE61PT101Z1H9
NFE61PT181B1H9
NFE61PT361B1H9
NFE61PT681B1H9
NFE61PT102E1H9
NFE61PT472C1H9

10Vdc
16Vdc
6.3Vdc
10Vdc
6.3Vdc
10Vdc
4Vdc
6.3Vdc
4Vdc
2.5Vdc
6.3Vdc
6.3Vdc
6.3Vdc
16Vdc
6.3Vdc
6.3Vdc
6.3Vdc
6.3Vdc
10Vdc
6.3Vdc
25Vdc
16Vdc
16Vdc
10Vdc
16Vdc
6.3Vdc
10Vdc
50Vdc
6.3Vdc
50Vdc
100Vdc
50Vdc
100Vdc
50Vdc
100Vdc
50Vdc
100Vdc
50Vdc
25Vdc
50Vdc
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc

0.047F+20%-20%
0.047F+20%-20%
0.1F+20%-20%
0.1F+20%-20%
0.22F+20%-20%
0.22F+20%-20%
0.47F+20%-20%
0.47F+20%-20%
1F+20%-20%
4.3F+20%-20%
0.47F+20%-20%
1.0F+20%-20%
1.0F+20%-20%
0.1F+20%-20%
0.22F+20%-20%
0.47F+20%-20%
1.0F+20%-20%
2.2F+20%-20%
2.2F+20%-20%
10F+20%-20%
0.1F+20%-20%
0.22F+20%-20%
0.47F+20%-20%
1.0F+20%-20%
1.0F+20%-20%
2.2F+20%-20%
4.7F+20%-20%
0.022F+20%-20%
27F+20%-20%
10000pF+20%-20%
10000pF+20%-20%
15000pF+20%-20%
15000pF+20%-20%
22000pF+20%-20%
22000pF+20%-20%
100000pF+20%-20%
100000pF+20%-20%
0.2F+80%-20%
1.5F+20%-20%
1.5F+20%-20%
22pF+30%-30%
47pF+50%-20%
100pF+80%-20%
220pF+50%-20%
470pF+50%-20%
1500pF+50%-20%
2200pF+50%-50%
33pF+30%-30%
68pF+30%-30%
100pF+30%-30%
180pF+30%-30%
360pF+20%-20%
680pF+30%-30%
1000pF+80%-20%
4700pF+80%-20%

1A
1A
2A
2A
2A
2A
2A
2A
2A
2A
2A
2A
2A
2A
2A
2A
4A
2A
4A
4A
2A
2A
2A
4A
4A
4A
6A
2A
6A
10A
10A
10A
10A
10A
10A
6A
6A
2A
6A
6A
6A
6A
6A
6A
6A
6A
6A
2A
2A
2A
2A
2A
2A
2A
2A
Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

118

0603 p142
(1608)
LC Combined
Multilayer Type
for Signal Lines

p143

p144

0805
(2012)

p145

0603
(1608)

p146
p147

LC Combined
Array Type
for Signal Lines

p148

0805
(2012)p149

p150

LC Combined
Wire Wound Type
for Signal Lines

1206
(3216)

Capacitance

Nominal
Cut-off
Frequency

Rated
Current

NFL15ST157X0J3
NFL15ST207X0J3
NFL15ST307X0J3
NFL15ST507X0J3
NFL18ST506H1A3
NFL18ST706H1A3
NFL18ST107H1A3
NFL18ST207H1A3
NFL18ST307H1A3
NFL18ST507H1A3
NFL18ST207X1C3
NFL18ST307X1C3
NFL18ST507X1C3
NFL18SP157X1A3
NFL18SP207X1A3
NFL18SP307X1A3
NFL18SP507X1A3
NFL21SP106X1C3
NFL21SP206X1C7
NFL21SP506X1C3
NFL21SP706X1C3
NFL21SP107X1C3
NFL21SP157X1C3
NFL21SP207X1C3
NFL21SP307X1C3
NFL21SP407X1C3
NFL21SP507X1C3
NFA18SL137V1A45
NFA18SL187V1A45
NFA18SL207V1A45
NFA18SL227V1A45
NFA18SL307V1A45
NFA18SL357V1A45
NFA18SL407V1A45
NFA18SL487V1A45
NFA18SL506X1A45
NFA18SD187X1A45
NFA18SD207X1A45
NFA21SL287V1A45
NFA21SL317V1A45
NFA21SL337V1A45
NFA21SL287V1A48
NFA21SL317V1A48
NFA21SL337V1A48
NFA21SL207X1A45
NFA21SL307X1A45
NFA21SL506X1A48
NFA21SL806X1A48
NFA21SL207X1A48
NFA21SL307X1A48
NFW31SP106X1E4
NFW31SP206X1E4
NFW31SP506X1E4
NFW31SP107X1E4
NFW31SP157X1E4
NFW31SP207X1E4
NFW31SP307X1E4
NFW31SP407X1E4
NFW31SP507X1E4

6.3Vdc
6.3Vdc
6.3Vdc
6.3Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
16Vdc
16Vdc
16Vdc
10Vdc
10Vdc
10Vdc
10Vdc
16Vdc
16Vdc
16Vdc
16Vdc
16Vdc
16Vdc
16Vdc
16Vdc
16Vdc
16Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc

22pF (Typ.)
17pF (Typ.)
12pF (Typ.)
7pF (Typ.)
110pF (Typ.)
70pF (Typ.)
50pF (Typ.)
22pF (Typ.)
16pF (Typ.)
10pF (Typ.)
25pF+20%-20%
18pF+20%-20%
10pF+20%-20%
34pF+20%-20%
24pF+20%-20%
19pF+20%-20%
11pF+20%-20%
670pF+20%-20%
240pF+20%-20%
84pF+20%-20%
76pF+20%-20%
44pF+20%-20%
28pF+20%-20%
22pF+20%-20%
19pF+10%-10%
16pF+10%-10%
12pF+10%-10%
-

150MHz
200MHz
300MHz
500MHz
50MHz
70MHz
100MHz
200MHz
300MHz
500MHz
200MHz
300MHz
500MHz
150MHz
200MHz
300MHz
500MHz
10MHz
20MHz
50MHz
70MHz
100MHz
150MHz
200MHz
300MHz
400MHz
500MHz
130MHz
180MHz
200MHz
220MHz
300MHz
350MHz
400MHz
480MHz
50MHz
180MHz
200MHz
280MHz
310MHz
330MHz
280MHz
310MHz
330MHz
200MHz
300MHz
50MHz
80MHz
200MHz
300MHz
10MHz
20MHz
50MHz
100MHz
150MHz
200MHz
300MHz
400MHz
500MHz

50mA
50mA
50mA
50mA
75mA
75mA
75mA
100mA
100mA
100mA
150mA
200mA
200mA
100mA
100mA
100mA
100mA
100mA
100mA
150mA
150mA
200mA
200mA
250mA
300mA
300mA
300mA
50mA
50mA
50mA
25mA
100mA
35mA
100mA
100mA
25mA
25mA
25mA
100mA
100mA
100mA
100mA
100mA
100mA
100mA
100mA
20mA
20mA
100mA
100mA
200mA
200mA
200mA
200mA
200mA
200mA
200mA
200mA
200mA

Chip EMIFILr

p141

0.3
0.3
0.3
0.3
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.6
0.6
0.6
0.6
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.6
0.6
0.6
0.6
0.5
0.5
0.5
0.5
0.6
0.6
0.6
0.5
0.5
0.5
0.85
0.85
0.85
0.5
0.5
0.85
0.85
0.85
0.85
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8

Rated
Voltage

Chip Common Mode Choke Coil

p140

0402
(1005)

Part Number

Block Type EMIFILr

Size Code Thickness

in nch (in mm) (mm)

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

119

Microwave Absorber

Type

Chip Ferrite Bead

NFp Chip EMIFILr Series Line Up

NFp Chip EMIFILr Series Line Up

Type

Size Code Thickness

in nch (in mm) (mm)

Chip Ferrite Bead

p152

RC Combined Type
for Signal Lines

0805
(2012)

p153

1206
(3216)

Rated
Voltage

Capacitance

Nominal
Cut-off
Frequency

Rated
Current

NFR21GD1002202
NFR21GD1004702
NFR21GD4702202
NFR21GD4704702
NFR21GD4706802
NFR21GD4701012
NFR21GD1012202
NFR21GD1014702
NFR21GD1016802
NFR21GD1011012
NFA31GD1006R84
NFA31GD1004704
NFA31GD1001014
NFA31GD4706R84
NFA31GD4703304
NFA31GD4704704
NFA31GD4701014
NFA31GD1016R84
NFA31GD1014704
NFA31GD1011014

50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
6Vdc
6Vdc
6Vdc
6Vdc
6Vdc
6Vdc
6Vdc
6Vdc
6Vdc
6Vdc

10pF+20%-20%
10pF+20%-20%
47pF+20%-20%
47pF+20%-20%
47pF+20%-20%
47pF+20%-20%
100pF+20%-20%
100pF+20%-20%
100pF+20%-20%
100pF+20%-20%
10pF+20%-20%
10pF+20%-20%
10pF+20%-20%
47pF+20%-20%
47pF+20%-20%
47pF+20%-20%
47pF+20%-20%
100pF+20%-20%
100pF+20%-20%
100pF+20%-20%

50mA
35mA
50mA
35mA
30mA
25mA
50mA
35mA
30mA
25mA
50mA
20mA
15mA
50mA
20mA
20mA
15mA
50mA
20mA
15mA

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Chip EMIFILr

RC Combined
Array Type
for Signal Lines

0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8

Part Number

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

120

NFE Series

Universal Type [Power Lines/Signal Lines] Chip EMIFILr

NFE31PT

NFE31PT

Series 1206/3216 (inch/mm)

Meets 6A, T-type filter with built-in ferrite bead.

c Equivalent Circuit

0.70.2

(1)

(2)

(3)

Input (Output)
(1)

3.20.35

Output (Input)
(3)

Chip Ferrite Bead

1.00.2

1.60.15

0.70.2

GND
(2)
No polarity.

c Packaging

1.60.15

Code

Packaging

Minimum
Quantity

: Electrode

180mm Reel Embossed Tape

2000

330mm Reel Embossed Tape

8000

Bulk(Bag)

500

(in mm)

Refer to pages from p.156 to p.162 for mounting information.

c Rated Value (p: packaging code)

Capacitance

Rated Current

Rated Voltage

NFE31PT220R1E9p

22pF 30%

6A

25Vdc

1000M ohm

-40C to +85C

NFE31PT470C1E9p

47pF 50/-20%

6A

25Vdc

1000M ohm

-40C to +85C

NFE31PT101C1E9p

100pF 80/-20%

6A

25Vdc

1000M ohm

-40C to +85C

NFE31PT221D1E9p

220pF 50/-20%

6A

25Vdc

1000M ohm

-40C to +85C

NFE31PT471F1E9p

470pF 50/-20%

6A

25Vdc

1000M ohm

-40C to +85C

NFE31PT152Z1E9p

1500pF 50/-20%

6A

25Vdc

1000M ohm

-40C to +85C

NFE31PT222Z1E9p

2200pF 50%

6A

25Vdc

1000M ohm

-40C to +85C

Chip Common Mode Choke Coil

Insulation Resistance
Operating
(min.)
Temperature Range

Part Number

Number of Circuit: 1

c Insertion Loss Characteristics

0

(50 - 50)

NFE31PT220R1E9
NFE31PT470C1E9
10

NFE31PT221D1E9
NFE31PT471F1E9
NFE31PT152Z1E9

30

NFE31PT222Z1E9
40

Block Type EMIFILr

Insertion Loss (dB)

NFE31PT101C1E9
20

Universal Type [Power Lines/Signal Lines]

Chip EMIFILr

c Dimensions

50

60
10

100
Frequency (MHz)

1000 2000

Microwave Absorber

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

121

NFE Series

Universal Type [Power Lines/Signal Lines] Chip EMIFILr

NFE61PT

NFE61PT

Series 2706/6816 (inch/mm)

T-type filter with built-in ferrite bead.

c Equivalent Circuit

0.70.2

2.60.3

0.70.2

(1)

(2)

(3)

Input (Output)
(1)

Output (Input)
(3)

1.60.3

Chip Ferrite Bead

c Dimensions

6.80.5

GND
(2)
No polarity.

1.60.3

c Packaging
Code

Packaging

Minimum
Quantity

(in mm)

180mm Reel Embossed Tape

2500

330mm Reel Embossed Tape

8000

Bulk(Bag)

500

Refer to pages from p.156 to p.162 for mounting information.

c Rated Value (p: packaging code)

Insulation Resistance
Operating
(min.)
Temperature Range

Part Number

Capacitance

Rated Current

Rated Voltage

NFE61PT330B1H9p

33pF 30%

2A

50Vdc

1000M ohm

-40C to +85C

NFE61PT680B1H9p

68pF 30%

2A

50Vdc

1000M ohm

-40C to +85C

NFE61PT101Z1H9p

100pF 30%

2A

50Vdc

1000M ohm

-40C to +85C

NFE61PT181B1H9p

180pF 30%

2A

50Vdc

1000M ohm

-40C to +85C

NFE61PT361B1H9p

360pF 20%

2A

50Vdc

1000M ohm

-40C to +85C

NFE61PT681B1H9p

680pF 30%

2A

50Vdc

1000M ohm

-40C to +85C

NFE61PT102E1H9p

1000pF 80/-20%

2A

50Vdc

1000M ohm

-40C to +85C

NFE61PT472C1H9p

4700pF 80/-20%

2A

50Vdc

1000M ohm

-40C to +85C

Number of Circuit: 1

c Insertion Loss Characteristics

0

(50 - 50)
NFE61PT330B1H9
NFE61PT680B1H9

Insertion Loss (dB)

10

NFE61PT101Z1H9

20
NFE61PT181B1H9
NFE61PT361B1H9

30

NFE61PT681B1H9
NFE61PT102E1H9

40

NFE61PT472C1H9
50

60
0.1

10
Frequency (MHz)

100

1000 2000

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Chip EMIFILr
Universal Type [Power Lines/Signal Lines]

: Electrode

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

122

NFM Series

Power Lines Type Chip EMIFILr

NFM15PC

NFM15PC

Series 0402/1005 (inch/mm)

0402 size chip 3-terminal capacitor for power lines.

c Equivalent Circuit

0.350.1
0.170.1

Input (Output)
(1)
0.40.1

0.50.2

Output (Input)
(3)

No polarity.
GND
(2)

1.00.1

c Packaging

(1)

(3)

0.50.2

(2)

(2) 0.150.1

Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

10000

Bulk(Bag)

500

: Electrode
(in mm)

c Dimensions

NFM15PCC (0.47 to 1F)

Chip Ferrite Bead

c Dimensions

c Equivalent Circuit

0.30.1
0.150.1

Input (Output)
(1)

0.50.1

Output (Input)
(3)

Power Lines Type

Chip EMIFILr

NFM15PC (0.047, 0.1, 0.22, 4.3F)

No polarity.
0.30.05

GND
(2)

c Packaging

(1)

(3)

0.50.1

(2)

(2) 0.150.1

Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

10000

Bulk(Bag)

500

: Electrode
(in mm)

Refer to pages from p.156 to p.162 for mounting information.

c Rated Value (p: packaging code)

Insulation Resistance
Operating
(min.)
Temperature Range

Part Number

Capacitance

Rated Current

Rated Voltage

NFM15PC473C1A3p

0.047F 20%

1A

10Vdc

1000M ohm

NFM15PC473C1C3p

0.047F 20%

1A

16Vdc

1000M ohm

-55C to +85C

NFM15PC104D0J3p

0.1F 20%

2A

6.3Vdc

1000M ohm

-55C to +105C

Chip Common Mode Choke Coil

1.00.1

NFM15PC104R1A3p

0.1F 20%

2A

10Vdc

1000M ohm

-55C to +85C

NFM15PC224D0J3p

0.22F 20%

2A

6.3Vdc

1000M ohm

-55C to +105C

NFM15PC224R1A3p

0.22F 20%

2A

10Vdc

1000M ohm

-55C to +85C

NFM15PC474D0G3p

0.47F 20%

2A

4Vdc

1000M ohm

-55C to +105C

NFM15PC474R0J3p

0.47F 20%

2A

6.3Vdc

1000M ohm

-55C to +85C

NFM15PC105R0G3p

1F 20%

2A

4Vdc

500M ohm

-55C to +85C

NFM15PC435R0E3p

4.3F 20%

2A

2.5Vdc

25M ohm

-55C to +85C

Block Type EMIFILr

-55C to +105C

Number of Circuit: 1

Microwave Absorber

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

123

NFM Series
Power Lines Type Chip EMIFILr
NFM15PCSeries 0402/1005 (inch/mm)

c Insertion Loss Characteristics

0

(50 - 50)

NFM15PC473C1A3/C1C3
NFM15PC104D0J3/R1A3

Insertion Loss (dB)

Chip Ferrite Bead

20

NFM15PC224D0J3/R1A3

40

60
NFM15PC474D0G3/R0J3
80

NFM15PC105R0G3
NFM15PC435R0E3
1

10
100
Frequency (MHz)

1000

6000

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Chip EMIFILr
Power Lines Type

100
0.1

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

124

NFM15PC

NFM Series

Power Lines Type Chip EMIFILr

NFM18PS

NFM18PS

Series 0603/1608 (inch/mm)

3-terminal capacitor for power lines whose ground impedance has reduced.
*Please refer to the products designed for both power lines and signal lines.

Input (Output)
(1)

Output (Input)
(3)

0.80.1

(2)

0.15+0.2
0.1

(1)
0.2 min.

No polarity.
GND

(3)

(2)

(2)
1.60.1

c Packaging

0.60.1
0.8+0.2
0.1

Chip Ferrite Bead

c Equivalent Circuit

0.15+0.2
0.1

c Dimensions

Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

4000

Bulk(Bag)

500

0.40.1
: Electrode

Refer to pages from p.156 to p.162 for mounting information.

c Rated Value (p: packaging code)

Insulation Resistance
Operating
(min.)
Temperature Range

Part Number

Capacitance

Rated Current

Rated Voltage

NFM18PS474R0J3p

0.47F 20%

2A

6.3Vdc

1000M ohm

-55C to +125C

NFM18PS105D0J3p

1.0F 20%

2A

6.3Vdc

500M ohm

-55C to +125C

NFM18PS105R0J3p

1.0F 20%

2A

6.3Vdc

500M ohm

-55C to +105C

Power Lines Type

Chip EMIFILr

(in mm)

c Insertion Loss Characteristics

0

Chip Common Mode Choke Coil

Number of Circuit: 1

(50 - 50)

Insertion Loss (dB)

20

40

60
NFM18PS474R0J3
NFM18PS105R0J3/D0J3

80

10
100
Frequency (MHz)

1000

6000

Microwave Absorber

Block Type EMIFILr

100
0.1

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

125

NFM Series

Power Lines Type Chip EMIFILr

NFM18PC

NFM18PC

Series 0603/1608 (inch/mm)

4A max., 0603 size chip 3-terminal capacitor for power lines.

*Please refer to the products designed for both power lines and signal lines.

c Dimensions

NFM18PC (0.1 to 0.47F, 2.2F - 6.3V)

c Equivalent Circuit

0.40.1

0.80.1

Input (Output)
(1)
0.60.1

Chip Ferrite Bead

0.250.1

Output (Input)
(3)

No polarity.
GND
(2)

0.2 min.
1.60.1
(2)

(1)

(3)

0.80.1

c Packaging
Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

4000

Bulk(Bag)

500

: Electrode

(2) 0.20.1

Chip EMIFILr
Power Lines Type

(in mm)

c Dimensions

NFM18PC (1F, 2.2F - 10V)

0.2 min.

c Equivalent Circuit

0.2 min.

Input (Output)
(1)

(1)

0.80.1

(2)

(3)

Output (Input)
(3)

No polarity.
GND
(2)

(2)
0.250.1

0.250.1

0.80.1

Block Type EMIFILr

Chip Common Mode Choke Coil

0.40.1
1.60.1

c Packaging
Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

4000

Bulk(Bag)

500

: Electrode
(in mm)

Refer to pages from p.156 to p.162 for mounting information.

c Rated Value (p: packaging code)

Part Number

Capacitance

Rated Current

Rated Voltage

Insulation Resistance
Operating
(min.)
Temperature Range

NFM18PC104R1C3p

0.1F 20%

2A

16Vdc

1000M ohm

-55C to +125C

NFM18PC224R0J3p

0.22F 20%

2A

6.3Vdc

1000M ohm

-55C to +125C

NFM18PC474R0J3p

0.47F 20%

2A

6.3Vdc

1000M ohm

-55C to +125C

NFM18PC105R0J3p

1.0F 20%

4A

6.3Vdc

500M ohm

-55C to +105C

NFM18PC225B0J3p

2.2F 20%

2A

6.3Vdc

200M ohm

-40C to +85C

NFM18PC225B1A3p

2.2F 20%

4A

10Vdc

200M ohm

-40C to +85C

Number of Circuit: 1

c Insertion Loss Characteristics

0

(50 - 50)

NFM18PC104R1C3
20
Insertion Loss (dB)

Microwave Absorber

NFM18PC224R0J3
NFM18PC474R0J3
40
NFM18PC105R0J3

60
NFM18PC225B1A3 (10V)
80
NFM18PC225B0J3 (6.3V)

100
0.1

10
100
Frequency (MHz)

1000

6000

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

126

EMI
Suppression
Effect

NFM18PS Series

s(IGHFREQUENCYPERFORMANCEOF.&-03SERIES
2 terminal MLCC: 2012mm size
(0.1Fx10pcs parallel)

10
20
30
I.L. (dB)

40

NFM18PC105R0J3 1pc
: 1608mm size (1.0Fx1)

50

Chip Ferrite Bead

#HIP TERMINALCAPACITOR

(50 ohm - 50 ohm)

60
70
80

10
100
Frequency (MHz)

1000

10000

.&-03SERIESHASBETTERHIGH FREQUENCYPERFORMANCECOMPAREDTONORMALCHIPTERMINALCAPACITORS

s/PTIMIZEOFBYPASSCAPACITORSUSINGCHIP TERMINALCAPACITOR
Bypass capacitor

chip 3-terminal capacitor

IC
ry

Memo

.UMBEROFPARTSCANBEREDUCED
s2EDUCE0#"SPACE
s2EDUCEMOUNTCOST

Chip Common Mode Choke Coil

IC
ry

Memo

Comparison of performance as a bypass capacitor

7ITHOUTCAPACITOR

7ITHCHIP TERMINAL
CAPACITOR.&- &X

7ITH-,##&X

Micro computer

Micro computer

Inner layer
power pattern

Micro computer

Block Type EMIFILr

100
0.1

Power Lines Type

Chip EMIFILr

NFM18PS105R0J3 1pc
: 1608mm size (1.0Fx1)

90

GND
Power line
MLCC

NFM

30
20

200

400
600
Frequency (MHz)

800

1000

50
40
30
20
10

200

400
600
Frequency (MHz)

800

1000

50

Microwave Absorber

40

60
Noise Level (dBV/m)

50

10

MLCC

60
Noise Level (dBV/m)

Noise Level (dBV/m)

60

40
30
20
10

200

400
600
Frequency (MHz)

800

1000

Noise suppression effect of NFM series is better than MLCCs (1 NFM is better than 4 MLCCs).
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

127

NFM Series

Power Lines Type Chip EMIFILr

NFM21PS

NFM21PS

Series 0805/2012 (inch/mm)

0805 size 3-terminal capacitor with very low ground impedance.

c Dimensions

c Equivalent Circuit
1.250.1

Input (Output)
(1)
0.850.1

Chip Ferrite Bead

1.20.3

No polarity.
GND
(2)

2.00.2

0.60.2

(2)

0.2+0.2
0.1
(1)

c Packaging

(3)

0.2+0.2
0.1

0.2 min.

(2)

Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

4000

Bulk(Bag)

500

: Electrode

Chip EMIFILr
Power Lines Type

(in mm)

Refer to pages from p.156 to p.162 for mounting information.

c Rated Value (p: packaging code)

Part Number

Capacitance

Rated Current

Rated Voltage

NFM21PS106B0J3p

10F 20%

4A

6.3Vdc

Insulation Resistance
Operating
(min.)
Temperature Range
50M ohm

Number of Circuit: 1

c Insertion Loss Characteristics

0

(50 - 50)

Insertion Loss (dB)

20

40
NFM21PS106B0J3
60

80

100
0.1

10
100
Frequency (MHz)

1000

6000

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Output (Input)
(3)

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

128

-40C to +85C

NFM Series

Power Lines Type Chip EMIFILr

NFM21PC

NFM21PC

Series 0805/2012 (inch/mm)

6A max., 0805 size chip 3-terminal capacitor for power lines.

*Please refer to the products designed for both power lines and signal lines.

c Equivalent Circuit

0.40.2

Input (Output)
(1)
0.850.1

0.30.2

Output (Input)
(3)

No polarity.
GND
(2)

0.60.2
1.250.1

2.00.2
(2)

Chip Ferrite Bead

c Dimensions

c Packaging
(3)

Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

4000

Bulk(Bag)

500

: Electrode
(in mm)

Refer to pages from p.156 to p.162 for mounting information.

c Rated Value (p: packaging code)

Capacitance

Rated Current

Rated Voltage

NFM21PC104R1E3p

0.1F 20%

2A

25Vdc

1000M ohm

-55C to +125C

NFM21PC224R1C3p

0.22F 20%

2A

16Vdc

1000M ohm

-55C to +125C

NFM21PC474R1C3p

0.47F 20%

2A

16Vdc

1000M ohm

-55C to +125C

NFM21PC105B1A3p

1.0F 20%

4A

10Vdc

500M ohm

-40C to +85C

NFM21PC105B1C3p

1.0F 20%

4A

16Vdc

500M ohm

-40C to +85C

NFM21PC225B0J3p

2.2F 20%

4A

6.3Vdc

200M ohm

-40C to +85C

NFM21PC475B1A3p

4.7F 20%

6A

10Vdc

100M ohm

-40C to +85C

Chip Common Mode Choke Coil

Insulation Resistance
Operating
(min.)
Temperature Range

Part Number

Number of Circuit: 1

c Insertion Loss Characteristics

0

(50 - 50)

NFM21PC104R1E3
NFM21PC224R1C3
NFM21PC474R1C3
NFM21PC105B1A3 (10V)/1C3 (16V)
40

60
NFM21PC225B0J3

Block Type EMIFILr

Insertion Loss (dB)

20

Power Lines Type

Chip EMIFILr

(2)

0.250.2

(1)

NFM21PC475B1A3

80

10
100
Frequency (MHz)

1000

6000

Microwave Absorber

100
0.1

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

129

NFM Series

Power Lines Type Chip EMIFILr

NFM3DPC

NFM3DPC

Series 1205/3212 (inch/mm)

1205 size 3-terminal capacitor for power lines.

*Please refer to the products designed for both power lines and signal lines.

c Equivalent Circuit

Chip Ferrite Bead

0.70.2

c Dimensions

Input (Output)
(1)

1.10.3

No polarity.

3.20.2

GND

1.250.2

(2)
(2)

(3)

0.250.2

(1)

c Packaging

(2)
: Electrode

0.30.2

Code

Packaging

Minimum
Quantity

180mm Reel Embossed Tape

4000

Bulk(Bag)

500

(in mm)

Chip EMIFILr
Power Lines Type

Output (Input)
(3)

Refer to pages from p.156 to p.162 for mounting information.

c Rated Value (p: packaging code)

Part Number

Capacitance

Rated Current

Rated Voltage

NFM3DPC223R1H3p

0.022F 20%

2A

50Vdc

Insulation Resistance
Operating
(min.)
Temperature Range
1000M ohm

-55C to +125C

Number of Circuit: 1

c Insertion Loss Characteristics

(50 - 50)

NFM3DPC223R1H3
Insertion Loss (dB)

c Notice (Rating)
When NFM3DPC series is used in
operating temperature exceeding +85C,
derating of current is necessary.
Please apply the derating curve shown in
chart according to the operating
temperature.

20

40

60

Derating of Rated Current

80

10
100
Frequency (MHz)

1000

6000

Rated Current (A)

2.0
100
0.1

0.5

Block Type EMIFILr

Chip Common Mode Choke Coil

85
Operating Temperature (C)

125

Microwave Absorber

0
-55

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

130

NFM Series

Power Lines Type Chip EMIFILr

NFM31PC

NFM31PC

Series 1206/3216 (inch/mm)

6A/27microF, 1206 size chip 3-terminal capacitor for power lines.

*Please refer to the products designed for both power lines and signal lines.

0.40.3

Input (Output)
(1)

1.60.2

Output (Input)
(3)

No polarity.
GND
(2)

3.20.2

(2)

(3)

(2)

c Packaging

1.60.2

(1)

0.30.2

Code

Packaging

Minimum
Quantity

180mm Reel Embossed Tape

3000

Bulk(Bag)

500

: Electrode
(in mm)

Refer to pages from p.156 to p.162 for mounting information.

c Rated Value (p: packaging code)

Part Number

Capacitance

Rated Current

Rated Voltage

NFM31PC276B0J3p

27F 20%

6A

6.3Vdc

Insulation Resistance
Operating
(min.)
Temperature Range
20M ohm

-40C to +85C

Power Lines Type

Chip EMIFILr

1.10.3

1.30.2

0.40.3

c Equivalent Circuit
Chip Ferrite Bead

c Dimensions

Number of Circuit: 1

(50 - 50)

Chip Common Mode Choke Coil

c Insertion Loss Characteristics

Insertion Loss (dB)

20

40

NFM31PC276B0J3

60

80

10
100
Frequency (MHz)

1000

6000

Microwave Absorber

Block Type EMIFILr

100
0.1

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

131

NFM Series

Power Lines Type Chip EMIFILr

NFM31KC

NFM31KC

Series 1206/3216 (inch/mm)

Capable for 10A max. Large current 3-terminal capacitor.

c Dimensions
0.40.3

1.20.3

0.40.3

c Equivalent Circuit

1.60.2

No polarity.
GND
(2)

3.20.2

(2)

(2)

c Packaging

1.60.2

(3)

0.30.2

(1)

Code

Packaging

Minimum
Quantity

180mm Reel Embossed Tape

3000

Bulk(Bag)

500

: Electrode

Refer to pages from p.156 to p.162 for mounting information.

c Rated Value (p: packaging code)

Part Number

Capacitance

Rated Current

Rated Voltage

Insulation Resistance
(min.)

Operating
Temperature Range

NFM31KC103R1H3p

10000pF 20%

10A

50Vdc

1000M ohm

-55C to +125C

NFM31KC103R2A3p

10000pF 20%

10A

100Vdc

1000M ohm

-55C to +125C

NFM31KC153R1H3p

15000pF 20%

10A

50Vdc

1000M ohm

-55C to +125C

NFM31KC153R2A3p

15000pF 20%

10A

100Vdc

1000M ohm

-55C to +105C

NFM31KC223R1H3p

22000pF 20%

10A

50Vdc

1000M ohm

-55C to +125C

NFM31KC223R2A3p

22000pF 20%

10A

100Vdc

1000M ohm

-55C to +105C

NFM31KC104R1H3p

100000pF 20%

6A

50Vdc

1000M ohm

-55C to +125C

NFM31KC104R2A3p

100000pF 20%

6A

100Vdc

1000M ohm

-55C to +105C

Number of Circuit: 1

c Insertion Loss Characteristics

0

(50 - 50)

20
Insertion Loss (dB)

40

60

NFM31KC104R1H3/R2A3
NFM31KC223R1H3/R2A3
NFM31KC153R1H3/R2A3
NFM31KC103R1H3
NFM31KC103R2A3

c Notice (Rating)
When NFM31KC series is used in
operating temperatures exceeding +105C,
derating of current is necessary.
Please apply the derating curve shown in
chart according to the operating
temperature.
Derating of Rated Current
(Except for NFM31KC 153/223/104 R2A3,
NFM31KC104R1H3)

80

12
100
0.1

10
100
Frequency (MHz)

1000

10

6000

Rated Current (A)

Chip Common Mode Choke Coil

Chip EMIFILr
Power Lines Type

(in mm)

Block Type EMIFILr

Output (Input)
(3)

1.30.2

Chip Ferrite Bead

Input (Output)
(1)

8
6
4
2

Microwave Absorber

0
-55

105
125
Operating Temperature (C)

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

132

NFM Series

Power Lines Type Chip EMIFILr

NFM41PC

NFM41PC

Series 1806/4516 (inch/mm)

6A max., 1806 size chip 3-terminal capacitor for power lines.

*Please refer to the products designed for both power lines and signal lines.

c Equivalent Circuit
1.60.3

Input (Output)
(1)

Output (Input)
(3)

No polarity.
GND
(2)

0.7 min.
4.50.3
(2)

(3)

(2)

c Packaging

1.60.3

(1)
0.3+0.3
0.2

Code

Packaging

Minimum
Quantity

180mm Reel Embossed Tape

4000

Bulk(Bag)

500

: Electrode
(in mm)

Refer to pages from p.156 to p.162 for mounting information.

c Rated Value (p: packaging code)

Part Number

Capacitance

NFM41PC204F1H3p

0.2F 80/-20%

Rated Current Rated Voltage

2A

50Vdc

Insulation Resistance
Operating
(min.)
Temperature Range
1000M ohm

-55C to +85C

NFM41PC155B1E3p

1.5F 20%

6A

25Vdc

300M ohm

-55C to +85C

NFM41PC155B1H3p

1.5F 20%

6A

50Vdc

100M ohm

-55C to +85C

Power Lines Type

Chip EMIFILr

1.50.3

1.00.2

0.40.3

Chip Ferrite Bead

c Dimensions

c Insertion Loss Characteristics

0

Chip Common Mode Choke Coil

Number of Circuit: 1

(50 - 50)

20
Insertion Loss (dB)

NFM41PC204F1H3
40

60
NFM41PC155B1E3/1H3
80

10
100
Frequency (MHz)

1000

6000

Microwave Absorber

Block Type EMIFILr

100
0.1

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

133

NFM Series

Signal Lines Type Chip EMIFILr

NFM15CC

NFM15CC

Series 0402/1005 (inch/mm)

0402 size chip 3-terminal capacitor for signal lines.

c Dimensions

c Equivalent Circuit

0.350.1

Input (Output)
(1)

0.50.2
0.40.1

Chip Ferrite Bead

0.170.1

No polarity.
GND
(2)

1.00.1

c Packaging

(1)

(3)

0.50.2

(2)

(2) 0.150.1

Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

10000

Bulk(Bag)

500

: Electrode

Chip EMIFILr
Signal Lines Type

(in mm)

Refer to pages from p.156 to p.162 for mounting information.

c Rated Value (p: packaging code)

Part Number

Capacitance

Rated Current

Rated Voltage

Insulation Resistance
(min.)

Operating
Temperature Range

NFM15CC222D1A3p

2200pF 20%

1A

10Vdc

1000M ohm

-55C to +105C

NFM15CC222D1C3p

2200pF 20%

1A

16Vdc

1000M ohm

-55C to +85C

NFM15CC223C1A3p

22000pF 20%

1A

10Vdc

1000M ohm

-55C to +105C

NFM15CC223C1C3p

22000pF 20%

1A

16Vdc

1000M ohm

-55C to +85C

Number of Circuit: 1

c Insertion Loss Characteristics

0

(50 - 50)

20
Insertion Loss (dB)

Chip Common Mode Choke Coil

Output (Input)
(3)

40
NFM15CC223C1A3/C1C3
NFM15CC222D1A3/D1C3
60

80

10
100
Frequency (MHz)

1000

6000

Microwave Absorber

Block Type EMIFILr

100
0.1

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

134

NFM Series

Signal Lines Type Chip EMIFILr

NFM18CC

NFM18CC

Series 0603/1608 (inch/mm)

0603 size general 3-terminal capacitor.

c Equivalent Circuit

0.40.1

0.80.1

Input (Output)
(1)
0.60.1

Output (Input)
(3)

No polarity.
GND
(2)

0.2 min.
1.60.1
(2)

(3)

0.80.1

(1)

c Packaging
Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

4000

Bulk(Bag)

500

: Electrode

(2) 0.20.1

(in mm)

Refer to pages from p.156 to p.162 for mounting information.

c Rated Value (p: packaging code)

Capacitance

Rated Current

Rated Voltage

NFM18CC220U1C3p

22pF 20%

400mA

16Vdc

1000M ohm

-55C to +125C

NFM18CC470U1C3p

47pF 20%

400mA

16Vdc

1000M ohm

-55C to +125C

NFM18CC101R1C3p

100pF 20%

500mA

16Vdc

1000M ohm

-55C to +125C

NFM18CC221R1C3p

220pF 20%

500mA

16Vdc

1000M ohm

-55C to +125C

NFM18CC471R1C3p

470pF 20%

500mA

16Vdc

1000M ohm

-55C to +125C

NFM18CC102R1C3p

1000pF 20%

600mA

16Vdc

1000M ohm

-55C to +125C

NFM18CC222R1C3p

2200pF 20%

700mA

16Vdc

1000M ohm

-55C to +125C

NFM18CC223R1C3p

22000pF 20%

1000mA

16Vdc

1000M ohm

-55C to +125C

Chip Common Mode Choke Coil

Insulation Resistance
Operating
(min.)
Temperature Range

Part Number

Number of Circuit: 1

c Insertion Loss Characteristics

0

(50 - 50)

20
NFM18CC223R1C3
NFM18CC222R1C3
40

NFM18CC102R1C3
NFM18CC471R1C3
NFM18CC221R1C3

60

NFM18CC101R1C3

Block Type EMIFILr

Insertion Loss (dB)

Signal Lines Type

Chip EMIFILr

0.250.1

Chip Ferrite Bead

c Dimensions

NFM18CC470U1C3
NFM18CC220U1C3

80

10
100
Frequency (MHz)

1000

6000

Microwave Absorber

100
0.1

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

135

NFM Series

Signal Lines Type Chip EMIFILr

NFM21CC

NFM21CC

Series 0805/2012 (inch/mm)

0805 size general 3-terminal capacitor.

c Dimensions

c Equivalent Circuit

0.30.2

0.850.1

Chip Ferrite Bead

Input (Output)
(1)

No polarity.
GND
(2)

0.60.2
2.00.2

1.250.1

(2)

(2)

Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

4000

Bulk(Bag)

500

: Electrode
(in mm)

Refer to pages from p.156 to p.162 for mounting information.

c Rated Value (p: packaging code)

Insulation Resistance
Operating
(min.)
Temperature Range

Part Number

Capacitance

Rated Current

Rated Voltage

NFM21CC220U1H3p

22pF 20%

700mA

50Vdc

1000M ohm

-55C to +125C

NFM21CC470U1H3p

47pF 20%

700mA

50Vdc

1000M ohm

-55C to +125C

NFM21CC101U1H3p

100pF 20%

700mA

50Vdc

1000M ohm

-55C to +125C

NFM21CC221R1H3p

220pF 20%

700mA

50Vdc

1000M ohm

-55C to +125C

NFM21CC471R1H3p

470pF 20%

1000mA

50Vdc

1000M ohm

-55C to +125C

NFM21CC102R1H3p

1000pF 20%

1000mA

50Vdc

1000M ohm

-55C to +125C

NFM21CC222R1H3p

2200pF 20%

1000mA

50Vdc

1000M ohm

-55C to +125C

NFM21CC223R1H3p

22000pF 20%

2000mA

50Vdc

1000M ohm

-55C to +125C

Number of Circuit: 1

c Insertion Loss Characteristics

0

20
Insertion Loss (dB)

Chip EMIFILr
Signal Lines Type
Chip Common Mode Choke Coil

c Packaging
(3)

0.2+0.2
0.1

(1)

(50 - 50)

NFM21CC223R1H3
NFM21CC222R1H3

40

NFM21CC102R1H3
NFM21CC471R1H3
NFM21CC221R1H3

60

NFM21CC101U1H3
NFM21CC470U1H3
80
NFM21CC220U1H3
100
0.1

10
100
Frequency (MHz)

1000

6000

Microwave Absorber

Block Type EMIFILr

Output (Input)
(3)

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

136

NFM Series

Signal Lines Type Chip EMIFILr

NFM3DCC

NFM3DCC

Series 1205/3212 (inch/mm)

1205 size general 3-terminal capacitor.

Input (Output)
(1)

Output (Input)
(3)

1.10.3

No polarity.
GND

1.250.2

(2)
(2)

(3)

c Packaging

(2)
0.30.2

: Electrode

Code

Packaging

Minimum
Quantity

180mm Reel Embossed Tape

4000

Bulk(Bag)

500

(in mm)

Refer to pages from p.156 to p.162 for mounting information.

c Rated Value (p: packaging code)

Part Number

Capacitance

Rated Current

Rated Voltage

Insulation Resistance
(min.)

Operating
Temperature Range

NFM3DCC220U1H3p

22pF +50/-20%

300mA

50Vdc

1000M ohm

-55C to +125C

NFM3DCC470U1H3p

47pF +50/-20%

300mA

50Vdc

1000M ohm

-55C to +125C

NFM3DCC101U1H3p

100pF +50/-20%

300mA

50Vdc

1000M ohm

-55C to +125C

NFM3DCC221R1H3p

220pF +50/-20%

300mA

50Vdc

1000M ohm

-55C to +125C

NFM3DCC471R1H3p

470pF +50/-20%

300mA

50Vdc

1000M ohm

-55C to +125C

NFM3DCC102R1H3p

1000pF +50/-20%

300mA

50Vdc

1000M ohm

-55C to +125C

NFM3DCC222R1H3p

2200pF +50/-20%

300mA

50Vdc

1000M ohm

-55C to +125C

NFM3DCC223R1H3p

22000pF +50/-20%

300mA

50Vdc

1000M ohm

-55C to +125C

Number of Circuit: 1

c Insertion Loss Characteristics

0

NFM3DCC223R1H3
NFM3DCC222R1H3
NFM3DCC102R1H3

40

NFM3DCC471R1H3
NFM3DCC221R1H3
NFM3DCC101U1H3

60

Block Type EMIFILr

Insertion Loss (dB)

20

(50 - 50)

Signal Lines Type

Chip EMIFILr

0.250.2

(1)

Chip Common Mode Choke Coil

3.20.2

Chip Ferrite Bead

c Equivalent Circuit
0.70.2

c Dimensions

NFM3DCC470U1H3
NFM3DCC220U1H3
80

10
Frequency (MHz)

100

1000 2000

Microwave Absorber

100
0.1

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

137

NFM Series

Signal Lines Type Chip EMIFILr

NFM41CC

NFM41CC

Series 1806/4516 (inch/mm)

1806 size general 3-terminal capacitor.

c Dimensions

c Equivalent Circuit

Chip Ferrite Bead

1.00.2

Input (Output)
(1)

No polarity.

1.50.3
4.50.3

GND

1.60.3

(2)
(2)

c Packaging

(3)

0.3+0.3
0.2

(1)

(2)
0.40.3

Code

Packaging

Minimum
Quantity

180mm Reel Embossed Tape

4000

Bulk(Bag)

500

: Electrode

Refer to pages from p.156 to p.162 for mounting information.

c Rated Value (p: packaging code)

Part Number

Capacitance

Rated Current

Rated Voltage

Insulation Resistance
(min.)

Operating
Temperature Range

NFM41CC220U2A3p

22pF +50/-20%

300mA

100Vdc

10000M ohm

-55C to +125C

NFM41CC470U2A3p

47pF +50/-20%

300mA

100Vdc

10000M ohm

-55C to +125C

NFM41CC101U2A3p

100pF +50/-20%

300mA

100Vdc

10000M ohm

-55C to +125C

NFM41CC221U2A3p

220pF +50/-20%

300mA

100Vdc

10000M ohm

-55C to +125C

NFM41CC471R2A3p

470pF +50/-20%

300mA

100Vdc

10000M ohm

-55C to +125C

NFM41CC102R2A3p

1000pF +50/-20%

300mA

100Vdc

10000M ohm

-55C to +125C

NFM41CC222R2A3p

2200pF +50/-20%

300mA

100Vdc

10000M ohm

-55C to +125C

NFM41CC223R2A3p

22000pF +50/-20%

300mA

100Vdc

10000M ohm

-55C to +125C

Number of Circuit: 1

c Insertion Loss Characteristics

0

20
Insertion Loss (dB)

Chip Common Mode Choke Coil

Chip EMIFILr
Signal Lines Type

(in mm)

(50 - 50)

NFM41CC223R2A3
NFM41CC222R2A3
NFM41CC102R2A3

40

NFM41CC471R2A3
NFM41CC221U2A3
60

NFM41CC101U2A3
NFM41CC470U2A3
NFM41CC220U2A3

80

100
0.1

10
Frequency (MHz)

100

1000 2000

Microwave Absorber

Block Type EMIFILr

Output (Input)
(3)

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

138

NFA Series

Signal Lines Type Chip EMIFILr

NFA31CC

NFA31CC

Series 1206/3216 (inch/mm)

4-line chip 3-terminal capacitor array, 1206 size.

c Equivalent Circuit

3.20.2
(7)

0.80.1

(10)

0.80.2
(8)

(9)

GND (1)

(2) GND

(3)

0.40.2

(7)

Input (Output)
(8)
(9)

1.60.2

(4)

(5)

(6)

1.10.5
Output (Input)
No polarity.

(10)

Chip Ferrite Bead

c Dimensions

(3)

0.05 min.

0.05 min.
(4)

(5)

(6)

Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

4000

Bulk(Bag)

100

: Electrode
(in mm)

Refer to pages from p.156 to p.162 for mounting information.

c Rated Value (p: packaging code)

Capacitance

Rated Current

Rated Voltage

NFA31CC220S1E4p

22pF 20%

200mA

25Vdc

1000M ohm

-40C to +85C

NFA31CC470S1E4p

47pF 20%

200mA

25Vdc

1000M ohm

-40C to +85C

NFA31CC101S1E4p

100pF 20%

200mA

25Vdc

1000M ohm

-40C to +85C

NFA31CC221S1E4p

220pF 20%

200mA

25Vdc

1000M ohm

-40C to +85C

NFA31CC471R1E4p

470pF 20%

200mA

25Vdc

1000M ohm

-40C to +85C

NFA31CC102R1E4p

1000pF 20%

200mA

25Vdc

1000M ohm

-40C to +85C

NFA31CC222R1E4p

2200pF 20%

200mA

25Vdc

1000M ohm

-40C to +85C

NFA31CC223R1C4p

22000pF 20%

200mA

16Vdc

1000M ohm

-40C to +85C

Chip Common Mode Choke Coil

Insulation Resistance
Operating
(min.)
Temperature Range

Part Number

Number of Circuit: 4

c Insertion Loss Characteristics

(50 - 50)

NFA31CC470S1E4
NFA31CC220S1E4
20

NFA31CC223R1C4
40
NFA31CC222R1E4
NFA31CC102R1E4
60

NFA31CC471R1E4

Block Type EMIFILr

Insertion Loss (dB)

Signal Lines Type

Chip EMIFILr

c Packaging
(2)

(1)

NFA31CC221S1E4
NFA31CC101S1E4
80

100
10

100
Frequency (MHz)

1000 2000

Microwave Absorber

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

139

NFL Series

Signal Lines Type Chip EMIFILr

NFL15ST

NFL15ST

Series 0402/1005 (inch/mm)

T-type LC filter, ultra-compact size of 0402.

c Dimensions
Chip Ferrite Bead

(Top View)

c Equivalent Circuit

(4)

(1)

(3)
(2)

(Side View)

NC
(4)

Directional Marking

0.50.15

0.350.15

GND
(2)

(Bottom View)

c Packaging

0.30.05

1.00.05

0.50.05

0.150.10

Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

10000

Bulk(Bag)

500

: Electrode

Chip EMIFILr
Signal Lines Type

0.150.10

(in mm)

Refer to pages from p.156 to p.162 for mounting information.

c Rated Value (p: packaging code)

Nominal
Cut-off Capacitance
Frequency

Part Number

Inductance

Insertion Loss 1

Insertion Loss 2

Rated Rated
Current Voltage

NFL15ST157X0J3p

150MHz

22pF (Typ.)

115nH (Typ.) 6dB max.(0 to 150MHz) 25dB min.(400 to 1000MHz) 50mA

6.3Vdc

NFL15ST207X0J3p

200MHz

17pF (Typ.)

105nH (Typ.) 6dB max.(0 to 200MHz) 25dB min.(600 to 1000MHz) 50mA

6.3Vdc

NFL15ST307X0J3p

300MHz

12pF (Typ.)

95nH (Typ.)

6dB max.(0 to 300MHz) 25dB min.(800 to 1000MHz) 50mA

6.3Vdc

NFL15ST507X0J3p

500MHz

7pF (Typ.)

60nH (Typ.)

6dB max.(0 to 500MHz)

6.3Vdc

Insulation Resistance (min.): 1000M ohm

Withstand Voltage: 18.9Vdc

25dB min.(1000MHz)

Operating Temperature Range: -40C to +85C

Number of Circuits: 1

c Insertion Loss Characteristics

0

NFL15ST157X0J3

20
Insertion Loss (dB)

Chip Common Mode Choke Coil

Output
(Input)
(3)

Input
(Output)
(1)

NFL15ST207X0J3
NFL15ST307X0J3
NFL15ST507X0J3

40

60

80
10

100
Frequency (MHz)

1000

3000

Microwave Absorber

Block Type EMIFILr

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

140

50mA

NFL Series

Signal Lines Type Chip EMIFILr

NFL18ST

NFL18ST

Series 0603/1608 (inch/mm)

T-type LC filter. Reduces waveform distortion of high speed signal.

c Equivalent Circuit

(Top View)

Input (Output)
(1)

(3)

(2)
(Side View)

0.30.1

*1 Directional Marking

GND
(2)

0.20.1

No Polarity.

0.60.1

0.20.1

c Packaging

0.2 min.
(Bottom View)

: Electrode
(in mm)
0.150.1
*1 There are no electrical polarity. But there is a directional marking
on the top of product to identify inner physical direction.

c Dimensions

NFL18ST_X

0.2 min.

Packaging

180mm Reel Paper Tape

4000

Bulk(Bag)

1000

c Equivalent Circuit
Input (Output)
(1)

0.2 min.

Minimum
Quantity

Code

Output (Input)
(3)

(1)

0.80.1

(2)

(3)

GND
(2)

(2)
0.250.1

0.250.1

Signal Lines Type

Chip EMIFILr

(1)

Output (Input)
(3)

0.80.1

(2)

Chip Ferrite Bead

c Dimensions
1.60.1

NFL18ST_H

0.80.1

No Polarity.

0.40.1

c Packaging
: Electrode
(in mm)

Minimum
Quantity

Code

Packaging

180mm Reel Paper Tape

4000

Bulk(Bag)

1000

Refer to pages from p.156 to p.162 for mounting information.

c Rated Value (p: packaging code)

Insertion Loss 1

Insertion Loss 2

Rated Rated
Current Voltage

NFL18ST506H1A3p

50MHz

110pF (Typ.) 350nH (Typ.) 6dB max.(0 to 50MHz) 30dB min.(200 to 1000MHz)

75mA

10Vdc

NFL18ST706H1A3p

70MHz

70pF (Typ.) 230nH (Typ.) 6dB max.(0 to 70MHz) 30dB min.(300 to 1000MHz)

75mA

10Vdc

NFL18ST107H1A3p

100MHz

50pF (Typ.) 150nH (Typ.) 6dB max.(0 to 100MHz) 30dB min.(400 to 1000MHz)

75mA

10Vdc

NFL18ST207H1A3p

200MHz

22pF (Typ.) 110nH (Typ.) 6dB max.(0 to 200MHz) 30dB min.(800 to 2000MHz) 100mA 10Vdc

NFL18ST307H1A3p

300MHz

16pF (Typ.)

74nH (Typ.) 6dB max.(0 to 300MHz) 30dB min.(1200 to 2000MHz) 100mA 10Vdc

NFL18ST507H1A3p

500MHz

10pF (Typ.)

42nH (Typ.) 6dB max.(0 to 500MHz) 30dB min.(1700 to 2000MHz) 100mA 10Vdc

Insulation Resistance (min.): 1000M ohm

Withstand Voltage: 30Vdc

Operating Temperature Range: -55C to +125C

Block Type EMIFILr

Nominal
Cut-off
Capacitance Inductance
Frequency

Part Number

Chip Common Mode Choke Coil

1.60.1

Number of Circuits: 1

c Insertion Loss Characteristics

NFL18ST_H Series
0

NFL18ST506H1A3
20
NFL18ST107H1A3

Microwave Absorber

Insertion Loss (dB)

NFL18ST706H1A3
40
NFL18ST207H1A3
NFL18ST307H1A3
60
NFL18ST507H1A3

80

100
1

!Note

10

100
Frequency (MHz)

1000

3000

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

141

NFL Series
Signal Lines Type Chip EMIFILr
NFL18ST Series 0603/1608 (inch/mm)

NFL18ST

c Rated Value (p: packaging code)

Chip Ferrite Bead

Part Number

Nominal
Capacitance
Cut-off Frequency

Inductance

Rated
Current

Rated
Voltage

Insulation Withstand
Operating
Resistance
Voltage
Temperature
Range
(min.)

NFL18ST207X1C3p

200MHz

25pF20%

110nH20%

150mA

16Vdc

1000M ohm

50Vdc

-55C to +125C

NFL18ST307X1C3p

300MHz

18pF20%

62nH20%

200mA

16Vdc

1000M ohm

50Vdc

-55C to +125C

NFL18ST507X1C3p

500MHz

10pF20%

43nH20%

200mA

16Vdc

1000M ohm

50Vdc

-55C to +125C

Number of Circuits: 1

c Insertion Loss Characteristics

NFL18ST_X Series
(50 - 50)

NFL18ST507X1C3

Insertion Loss (dB)

Chip EMIFILr
Signal Lines Type

20

NFL18ST307X1C3
NFL18ST207X1C3

40

60

80
10

100
Frequency (MHz)

1000

5000

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

142

NFL Series

Signal Lines Type Chip EMIFILr

NFL18SP

NFL18SP

Series 0603/1608 (inch/mm)

PI-type LC filter. Reduces waveform distortion of high speed signal.

c Equivalent Circuit

0.150.1

Input (Output)
(1)

(3)

Output (Input)
(3)

0.80.1

(1)

(1)

(3)
(2)

GND
(2)

1.60.1

No polarity.

0.2 min.

0.60.1

c Packaging

0.30.1

0.40.1

0.30.1

0.150.1

Minimum
Quantity

Code

Packaging

180mm Reel Paper Tape

4000

Bulk(Bag)

1000

0.150.1
: Electrode
(in mm)

Refer to pages from p.156 to p.162 for mounting information.

c Rated Value (p: packaging code)

Insulation Withstand
Operating
Resistance
Voltage Temperature Range
(min.)

Part Number

Nominal
Cut-off Frequency

Capacitance

Inductance

Rated
Current

Rated
Voltage

NFL18SP157X1A3p

150MHz

34pF20%

100nH20%

100mA

10Vdc

1000M ohm

30Vdc

-55C to +125C

NFL18SP207X1A3p

200MHz

24pF20%

80nH20%

100mA

10Vdc

1000M ohm

30Vdc

-55C to +125C

NFL18SP307X1A3p

300MHz

19pF20%

60nH20%

100mA

10Vdc

1000M ohm

30Vdc

-55C to +125C

NFL18SP507X1A3p

500MHz

11pF20%

38nH20%

100mA

10Vdc

1000M ohm

30Vdc

-55C to +125C

Signal Lines Type

Chip EMIFILr

(2)

Chip Ferrite Bead

c Dimensions

Chip Common Mode Choke Coil

Number of Circuits: 1

c Insertion Loss Characteristics

(50 - 50)

0
NFL18SP157X1A3
NFL18SP207X1A3

Insertion Loss (dB)

20

NFL18SP307X1A3
NFL18SP507X1A3
40

60

80
100
Frequency (MHz)

1000 2000

Block Type EMIFILr

10

Microwave Absorber

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

143

NFL Series

Signal Lines Type Chip EMIFILr

NFL21SP

NFL21SP

Series 0805/2012 (inch/mm)

PI-type LC filter. Reduces waveform distortion of high speed signal.

c Dimensions

c Equivalent Circuit

0.40.2

Input (Output)
(1)

Output (Input)
(3)

0.850.1

Chip Ferrite Bead

0.30.2

0.60.2

GND
(2)

2.00.2

No polarity.

(1)

1.250.1

(2)

(3)

(2)

c Packaging
Minimum
Quantity

Code

Packaging

180mm Reel Paper Tape

4000

Bulk(Bag)

1000

0.250.2
: Electrode

Chip Common Mode Choke Coil

Chip EMIFILr
Signal Lines Type

(in mm)

Refer to pages from p.156 to p.162 for mounting information.

c Rated Value (p: packaging code)

Part Number

Nominal
Cut-off
Frequency

Capacitance

Inductance

Rated
Current

Rated
Voltage

Insulation
Resistance
(min.)

NFL21SP106X1C3p

10MHz

670pF20%

680nH20%

100mA

16Vdc

1000M ohm

50Vdc

-55C to +125C

NFL21SP206X1C7p

20MHz

240pF20%

700nH20%

100mA

16Vdc

1000M ohm

50Vdc

-55C to +125C

NFL21SP506X1C3p

50MHz

84pF20%

305nH20%

150mA

16Vdc

1000M ohm

50Vdc

-55C to +125C

NFL21SP706X1C3p

70MHz

76pF20%

185nH20%

150mA

16Vdc

1000M ohm

50Vdc

-55C to +125C

NFL21SP107X1C3p

100MHz

44pF20%

135nH20%

200mA

16Vdc

1000M ohm

50Vdc

-55C to +125C

NFL21SP157X1C3p

150MHz

28pF20%

128nH20%

200mA

16Vdc

1000M ohm

50Vdc

-55C to +125C

NFL21SP207X1C3p

200MHz

22pF20%

72nH20%

250mA

16Vdc

1000M ohm

50Vdc

-55C to +125C

NFL21SP307X1C3p

300MHz

19pF10%

45nH10%

300mA

16Vdc

1000M ohm

50Vdc

-55C to +125C

NFL21SP407X1C3p

400MHz

16pF10%

34nH10%

300mA

16Vdc

1000M ohm

50Vdc

-55C to +125C

NFL21SP507X1C3p

500MHz

12pF10%

31nH10%

300mA

16Vdc

1000M ohm

50Vdc

-55C to +125C

Number of Circuits: 1

c Insertion Loss Characteristics

(50 - 50)

NFL21SP106X1C3
NFL21SP206X1C7
NFL21SP506X1C3
NFL21SP706X1C3
NFL21SP107X1C3

Insertion Loss (dB)

20

Block Type EMIFILr

Withstand
Operating
Voltage Temperature Range

40

NFL21SP157X1C3
NFL21SP207X1C3
NFL21SP307X1C3
NFL21SP407X1C3
NFL21SP507X1C3

60

80
10

100
Frequency (MHz)

1000 2000

Microwave Absorber

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

144

NFA Series

Signal Lines Type Chip EMIFILr

NFA18SL

NFA18SL

Series 0603/1608 (inch/mm)

LC filter 4-line array for mobile phones.

c Dimensions
1.60.1

c Equivalent Circuit

(Top View)

(6)
(3)
GND (2)

(7)

0.150.1

(8) (9) (10)

(3)(4)(5)(6): IN (OUT)
(7)(8)(9)(10): OUT (IN)

0.20.1
Directional Marking

0.250.1

c Dimensions
(3)

(4)

(5)

(8) (9) (10)

180mm Reel Embossed Tape

4000

Bulk(Bag)

1000

(5)

(6)

GND (1)

(2) GND

(7)

0.40.05

(8)

(9)

(10)

0.6+0.05
0.1

0.250.1

c Packaging

0.20.1
(Bottom View)

Minimum
Quantity

Code

Packaging

180mm Reel Embossed Tape

4000

Bulk(Bag)

1000

: Electrode
(in mm)

c Dimensions

c Equivalent Circuit

1.60.1

(Top View)
(3)

(4)

(5)

(3)(4)(5)(6): IN (OUT)
(7)(8)(9)(10): OUT (IN)

(6)

GND (1)

(2) GND

(3)

(4)

(5)

(3)(4)(5)(6): IN (OUT)
(7)(8)(9)(10): OUT (IN)
(6)

0.80.1

NFA18SL 307/407/487 V1A45

(4)

(3)(4)(5)(6): IN (OUT)
(7)(8)(9)(10): OUT (IN)

0.20.1
Directional Marking
(Side View)

L
B

(3)

GND (2)
(7)

Packaging

(6)

(1) GND

0.150.1

Minimum
Quantity

Code

c Equivalent Circuit

1.60.1

(Top View)

0.80.1

NFA18SL227V1A45

(2) GND

c Packaging

Part Number
T
NFA18SL357V1A45 0.50.1
NFA18SL137V1A45
NFA18SL187V1A45
+0.05
0.60.1
NFA18SL207V1A45
NFA18SL506X1A45
(in mm)

0.20.1

GND (1)

(7)
(8)
(9)
(10)
*Please change IN/OUT according to the circuit condition.
T

(Bottom View)

(3)(4)(5)(6): IN (OUT)
(7)(8)(9)(10): OUT (IN)
(6)

: Electrode

0.40.05

(Side View)

(5)

Chip Ferrite Bead

(1) GND

(4)

Signal Lines Type

Chip EMIFILr

(5)

GND (1)
(8)

(2) GND

(9) (10)
Directional Marking
0.50.1

(7)

Chip Common Mode Choke Coil

(4)

(Side View)

0.20.1 0.40.05

(7)
(8)
(9)
(10)
*Please change IN/OUT according to the circuit condition.

c Packaging

0.250.1

0.150.1

(Bottom View)

0.200.1

Minimum
Quantity

Code

Packaging

180mm Reel Embossed Tape

4000

Bulk(Bag)

1000

: Electrode
(in mm)

Refer to pages from p.156 to p.162 for mounting information.

Block Type EMIFILr

(3)

0.80.1

NFA18SL 137/187/207/357 V1A45

NFA18SL506X1A45

c Rated Value (p: packaging code)

Nominal Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insertion Loss Rated Rated Insulation Withstand
Resistance
Cut-off
(Cut-off
(470MHz)
(800MHz)
(900MHz)
(2000MHz)
Voltage
Current Voltage
(min.)
Frequency Frequency)
(min.)
(min.)
(min.)
(min.)

NFA18SL137V1A45p 130MHz

6dB max.

25dB

25dB

50mA 10Vdc 1000M ohm

30Vdc

NFA18SL187V1A45p 180MHz

6dB max.

20dB

20dB

50mA 10Vdc 1000M ohm

30Vdc

NFA18SL207V1A45p 200MHz

6dB max.

15dB

15dB

50mA 10Vdc 1000M ohm

30Vdc

NFA18SL227V1A45p 220MHz

6dB max.

30dB

30dB

25mA 10Vdc 1000M ohm

30Vdc

NFA18SL307V1A45p 300MHz

6dB max.

20dB

20dB

100mA 10Vdc 1000M ohm

30Vdc

NFA18SL357V1A45p 350MHz

6dB max.

15dB

13dB

35mA 10Vdc 1000M ohm

30Vdc

NFA18SL407V1A45p 400MHz

6dB max.

18dB

18dB

100mA 10Vdc 1000M ohm

30Vdc

NFA18SL487V1A45p 480MHz

6dB max.

15dB

15dB

100mA 10Vdc 1000M ohm

30Vdc

Operating Temperature Range: -40C to +85C (NFA18SL 137/187/207/227/357 V1A45), -55C to +125C (NFA18SL 307/407/487 V1A45)

Number of Circuits: 4

Microwave Absorber

Part Number

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

145

NFA Series
Signal Lines Type Chip EMIFILr
NFA18SL Series 0603/1608 (inch/mm)

NFA18SL

c Insertion Loss Characteristics

NFA18SL 137/187/207 V1A45

NFA18SL227V1A45
(50 - 50)

(50 - 50)

NFA18SL137V1A45
20

20
NFA18SL187V1A45

Insertion Loss (dB)

Insertion Loss (dB)

Chip Ferrite Bead

NFA18SL207V1A45

40

60

100
Frequency (MHz)

1000

80
10

3000

NFA18SL 307/407/487 V1A45

100
Frequency (MHz)

1000

(50 - 50)

NFA18SL307V1A45
NFA18SL407V1A45
NFA18SL487V1A45

NFA18SL357V1A45
20
Insertion Loss (dB)

20

40

40

60

60

80
10

100
Frequency (MHz)

1000

3000

80
10

100
Frequency (MHz)

1000

Part Number

Nominal Cut-off
Frequency

NFA18SL506X1A45p

50MHz

Insertion Loss
Insertion Loss Insertion Loss
Rated Rated Insulation Withstand
Resistance
Voltage
(Cut-off Frequency) (500MHz) (min.) (1000MHz) (min.) Current Voltage
(min.)
6dB max.

30dB

25dB

25mA

10Vdc 1000M ohm

Number of Circuits: 4

c Insertion Loss Characteristics

NFA18SL_X
(50 - 50)

NFA18SL506X1A45
20
Insertion Loss (dB)

Block Type EMIFILr

3000

c Rated Value (p: packaging code)

Operating Temperature Range: -40C to +85C

40

60

Microwave Absorber

3000

NFA18SL357V1A45
(50 - 50)

Insertion Loss (dB)

Chip EMIFILr
Signal Lines Type

NFA18SL227V1A45

60

80
10

Chip Common Mode Choke Coil

40

80
10

100
Frequency (MHz)

1000

3000

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

146

30Vdc

NFA Series

Signal Lines Type Chip EMIFILr

NFA18SD

NFA18SD

Series 0603/1608 (inch/mm)

For differential signal I/F of LCD or camera in mobile phones.

c Dimensions

c Equivalent Circuit
(3)

1.60.1
(5)

(1) GND

0.150.1

GND (2)
(7)

(8) (9) (10)

0.20.1
Directional Marking

0.40.05

(5)

(6)

GND (1)

(2) GND

(3)(4)(5)(6): IN (OUT)
(7)(8)(9)(10): OUT (IN)
(7)

(8)

(9)

(10)

0.250.1
0.6+0.05
0.1

(Side View)

(4)

(6)

Chip Ferrite Bead

(4)

c Packaging

0.20.1
(Bottom View)

Minimum
Quantity

Code

Packaging

180mm Reel Embossed Tape

4000

Bulk(Bag)

1000

: Electrode
(in mm)

Refer to pages from p.156 to p.162 for mounting information.

c Rated Value (p: packaging code)

Nominal
Insertion Loss
Insertion Loss Insertion Loss Insertion Loss Insertion Loss Rated Rated
Cut-off
Frequency (Cut-off Frequency) (500MHz) (min.) (900MHz) (min.) (1500MHz) (min.) (2000MHz) (min.) Current Voltage

Insulation
Resistance
(min.)

Withstand
Voltage

NFA18SD187X1A45p 180MHz

6dB max.

15dB

20dB

20dB

20dB

25mA 10Vdc 1000M ohm 30Vdc

NFA18SD207X1A45p 200MHz

6dB max.

13dB

20dB

20dB

20dB

25mA 10Vdc 1000M ohm 30Vdc

Operating Temperature Range: -40C to +85C

Number of Circuits: 4

c Insertion Loss Characteristics

(50 - 50)

Chip Common Mode Choke Coil

Part Number

10
Insertion Loss (dB)

NFA18SD207X1A45
NFA18SD187X1A45
20

30

40

100
Frequency (MHz)

1000

3000

Microwave Absorber

Block Type EMIFILr

50
10

Signal Lines Type

Chip EMIFILr

(3)

0.80.1

(Top View)

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

147

NFA Series

Signal Lines Type Chip EMIFILr

NFA21SL

NFA21SL

Series 0805/2012 (inch/mm)

L-type LC filter 4-line array for mobile phones.

c Dimensions
(Top View)

c Equivalent Circuit
(3)

2.00.1

0.20.15

(7) (8) (9) (10)

0.20.15

(3)(4)(5)(6): IN (OUT)
(7)(8)(9)(10): OUT (IN)

(8)

(9)

(10)

c Packaging

: Electrode

Minimum
Quantity

Code

Packaging

180mm Reel Embossed Tape

4000

Bulk(Bag)

1000

(in mm)

Refer to pages from p.156 to p.162 for mounting information.

c Rated Value (p: packaging code)

Nominal
Insertion Loss
Insertion Loss Insertion Loss Rated
Cut-off Frequency (Cut-off Frequency) (800MHz) (min.) (900MHz) (min.) Current

Part Number

Rated Insulation Withstand

Resistance
Voltage
Voltage
(min.)

NFA21SL287V1A45p

280MHz

6dB max.

25dB

25dB

100mA

10Vdc

1000M ohm

30Vdc

NFA21SL317V1A45p

310MHz

6dB max.

20dB

20dB

100mA

10Vdc

1000M ohm

30Vdc

NFA21SL337V1A45p

330MHz

6dB max.

15dB

15dB

100mA

10Vdc

1000M ohm

30Vdc

NFA21SL287V1A48p

280MHz

6dB max.

25dB

25dB

100mA

10Vdc

1000M ohm

30Vdc

NFA21SL317V1A48p

310MHz

6dB max.

20dB

20dB

100mA

10Vdc

1000M ohm

30Vdc

NFA21SL337V1A48p

330MHz

6dB max.

20dB

20dB

100mA

10Vdc

1000M ohm

30Vdc

Operating Temperature Range: -55C to +125C

Number of Circuits: 4

c Insertion Loss Characteristics

NFA21SL_V1A45

NFA21SL_V1A48
(50 - 50)

(50 - 50)
NFA21SL337V1A48

NFA21SL287V1A45
NFA21SL317V1A45
NFA21SL337V1A45

20

NFA21SL287V1A48
20
Insertion Loss (dB)

NFA21SL317V1A48
Insertion Loss (dB)

Chip EMIFILr
Signal Lines Type

GND (2)

(7)

Part Number
T
NFA21SLpppX1A45p
0.50.1
NFA21SLpppV1A45p
NFA21SLpppX1A48p
0.850.1
NFA21SLpppV1A48p

(Bottom View)

Chip Common Mode Choke Coil

(6)

0.250.1

0.50.05

40

40

60

60

80
10

100
Frequency (MHz)

1000

3000

80
10

100
Frequency (MHz)

1000

3000

Continued on the following page.

Microwave Absorber

Block Type EMIFILr

(5)

(1) GND

0.15 min.

1.250.1

GND (2)
0.250.1

Chip Ferrite Bead

(1) GND

0.250.1

(4)

Directional Marking

(3) (4) (5) (6)

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

148

NFA Series
Signal Lines Type Chip EMIFILr
NFA21SL Series 0805/2012 (inch/mm)

NFA21SL

c Rated Value (p: packaging code)

Insulation Withstand
Resistance
Voltage
(min.)

NFA21SL207X1A45p

200MHz

2dB to 7dB

13dB

25dB

25dB

100mA 10Vdc 1000M ohm

30Vdc

NFA21SL307X1A45p

300MHz

2dB to 7dB

7dB

20dB

25dB

100mA 10Vdc 1000M ohm

30Vdc

NFA21SL506X1A48p

50MHz

0dB to 6dB

30dB

20dB

20mA

10Vdc 1000M ohm

30Vdc

NFA21SL806X1A48p

80MHz

2dB to 7dB

25dB

25dB

20mA

10Vdc 1000M ohm

30Vdc

NFA21SL207X1A48p

200MHz

2dB to 7dB

13dB

25dB

25dB

100mA 10Vdc 1000M ohm

30Vdc

NFA21SL307X1A48p

300MHz

2dB to 7dB

7dB

20dB

25dB

100mA 10Vdc 1000M ohm

30Vdc

Operating Temperature Range: -55C to +125C

Chip Ferrite Bead

Nominal
Insertion Loss
Insertion Loss Insertion Loss Insertion Loss
Rated Rated
Cut-off Frequency (Cut-off Frequency) (500MHz) (min.) (800MHz) (min.) (1000MHz) (min.) Current Voltage

Part Number

Number of Circuits: 4

c Insertion Loss Characteristics

NFA21SL_X
(50 - 50)

NFA21SL806X1A48
NFA21SL207X1A45(48)
NFA21SL307X1A45(48)

20
Insertion Loss (dB)

Signal Lines Type

Chip EMIFILr

NFA21SL506X1A48

40

60

80
100
Frequency (MHz)

1000

3000

Chip Common Mode Choke Coil

10

Microwave Absorber

Block Type EMIFILr

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

149

NFW Series

Signal Lines Type Chip EMIFILr

NFW31SP

NFW31SP

Series 1206/3216 (inch/mm)

Wire-wound PI-type LC filter.

c Dimensions

c Equivalent Circuit
Input (Output)
(1)

Output (Input)
(3)

1.80.2

Chip Ferrite Bead

2.30.2

GND
(2)

1.60.2

3.20.3

No polarity.
(1)

(3)

(2)

c Packaging

(1): Input electrode

(2): Ground electrode
(3): Output electrode
* No polarity.
0.70.3

Code

Packaging

Minimum
Quantity

180mm Reel Embossed Tape

2000

330mm Reel Embossed Tape

7500

: Electrode

0.70.3
0.650.2

Chip Common Mode Choke Coil

Chip EMIFILr
Signal Lines Type

(in mm)

Refer to pages from p.156 to p.162 for mounting information.

c Rated Value (p: packaging code)

NFW31SP106X1E4p

10MHz

NFW31SP206X1E4p

20MHz

NFW31SP506X1E4p

50MHz

NFW31SP107X1E4p

100MHz

NFW31SP157X1E4p

150MHz

NFW31SP207X1E4p

200MHz

NFW31SP307X1E4p

300MHz

NFW31SP407X1E4p

400MHz

NFW31SP507X1E4p

500MHz

Rated Current: 200mA

6dB max. 5dB min. 25dB min. 25dB min.

Rated Voltage: 25Vdc

6dB max. 5dB min. 25dB min.

25dB min.

25dB min.

30dB min. 30dB min.

30dB min.

30dB min. 30dB min.

6dB max.

5dB min.

20dB min. 30dB min.

6dB max.

6dB max.

10dB min. 30dB min.

6dB max.

5dB min. 15dB min.

6dB max.

Operating Temperature Range: -40C to +85C

10dB min. 20dB min. 30dB min. 30dB min.

Number of Circuit: 1

(50 - 50)

NFW31SP157X1E4
NFW31SP207X1E4

Insertion Loss (dB)

NFW31SP307X1E4
NFW31SP407X1E4
NFW31SP507X1E4

40

NFW31SP106X1E4
NFW31SP206X1E4
NFW31SP506X1E4

60

NFW31SP107X1E4

80
10

100
Frequency (MHz)

1000 2000

Microwave Absorber

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

150

30dB min. 30dB min.

6dB max. 10dB min.

c Insertion Loss Characteristics

20

Block Type EMIFILr

Nominal Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insertion Loss
Cut-off
at 10MHz
at 20MHz
at 50MHz
at 100MHz at 150MHz at 200MHz at 300MHz at 400MHz at 500MHz at 1000MHz
Frequency

Part Number

10dB min.

6dB max. 10dB min.

NFW31 Series

Measuring Circuit

Example of EMI Suppression

in an Actual Circuit

EMI
Suppression Filter

74ALS04

74ALS00

Chip Ferrite Bead

EMI
Suppression
Effect

Measuring
Point
10MHz

Type of Filter

Signal Wave Form 20ns/div

1V/div / EMI Suppression Effect / Description

60

20
0

Signal Waveform 20ns/div

1V/div

400
100
200
300
Frequency (MHz)

500

Noise Spectrum
(10:1 Active Probe)

NFW31SP Series
(Cut-off frequency 50MHz)

Noise Level (dBV/m)

100
80

NFW31SP's steep attenuation

characteristic means excellent EMI
suppression without waveform
cornering.

Level before
filter mounting

60
40
20
0

400
100
200
300
Frequency (MHz)

500

(NFM41CC 470pF)

Noise Level (dBV/m)

100

Conventional Chip
Solid Type EMI Filter

80

40
20

L
C

L: Chip Inductor
C: Chip Capacitor
(270pF)

100
Noise Level (dBV/m)

3-terminal capacitors suppress

signal frequencies as EMI
frequencies so the signal waveform
is distorted.

Level before
filter mounting

60

Filter Combined
with Conventional LCs

Chip Common Mode Choke Coil

Signal Lines Type

Chip EMIFILr

40

80

400
100
200
300
Frequency (MHz)

500

Level before
filter mounting

60
40
20
0

400
100
200
300
Frequency (MHz)

500

Combinations of inductors and

capacitors can yield a steep
attenuation characteristic, but they
require a great deal more mounting
space.
Moreover, at high frequencies the
EMI suppression is less than that
obtained by NFW31S.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

151

Block Type EMIFILr

Signal Waveform
and Noise Spectrum
before Filter Mounting

80

Microwave Absorber

Noise Level (dBV/m)

100

NFR Series

Signal Lines Type Chip EMIFILr

NFR21GD

NFR21GD

Series 0805/2012 (inch/mm)

3-terminal RC filter, dampens the noise current and returns back to ground.
c Dimensions

c Equivalent Circuit

(Top View)

Chip Ferrite Bead

0.50.2

1.0 max.

(2)
0.950.35

2.00.2

1.250.2

No polarity.

c Packaging

(2)
(3)

0.3+0.2
0.25

(1)

Chip EMIFILr
Signal Lines Type

GND

1.00.35

(Bottom View)

Chip Common Mode Choke Coil

Output (Input)
(3)

Input (Output)
(1)

(2)

Code

Packaging

Minimum
Quantity

180mm Reel Embossed Tape

4000

Bulk(Bag)

500

0.3+0.2
0.25
: Electrode
(in mm)

Refer to pages from p.156 to p.162 for mounting information.

c Rated Value (p: packaging code)

Rated Current Rated Voltage

Insulation Resistance
Operating
(min.)
Temperature Range

Part Number

Capacitance

Resistance

NFR21GD1002202p

10pF 20%

22ohm 30%

50mA

50Vdc

1000M ohm

-40C to +85C

NFR21GD1004702p

10pF 20%

47ohm 30%

35mA

50Vdc

1000M ohm

-40C to +85C

NFR21GD4702202p

47pF 20%

22ohm 30%

50mA

50Vdc

1000M ohm

-40C to +85C

NFR21GD4704702p

47pF 20%

47ohm 30%

35mA

50Vdc

1000M ohm

-40C to +85C

NFR21GD4706802p

47pF 20%

68ohm 30%

30mA

50Vdc

1000M ohm

-40C to +85C

NFR21GD4701012p

47pF 20%

100ohm 30%

25mA

50Vdc

1000M ohm

-40C to +85C

NFR21GD1012202p

100pF 20%

22ohm 30%

50mA

50Vdc

1000M ohm

-40C to +85C

NFR21GD1014702p

100pF 20%

47ohm 30%

35mA

50Vdc

1000M ohm

-40C to +85C

NFR21GD1016802p

100pF 20%

68ohm 30%

30mA

50Vdc

1000M ohm

-40C to +85C

NFR21GD1011012p

100pF 20%

100ohm 30%

25mA

50Vdc

1000M ohm

-40C to +85C

Number of Circuit: 1

c Insertion Loss Characteristics

0

(50 - 50)

(50 - 50)

NFR21GD4701012
10

10
NFR21GD1004702

Insertion Loss (dB)

Insertion Loss (dB)

Block Type EMIFILr

NFR21GD1002202
NFR21GD4702202

20

NFR21GD4704702
NFR21GD4706802
NFR21GD1012202

30

NFR21GD1014702

20
NFR21GD1011012
30

NFR21GD1016802
40

40

50

50
1

10

100

10

100
Frequency (MHz)

Microwave Absorber

Frequency (MHz)

1000

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

152

1000

NFA Series

Signal Lines Type Chip EMIFILr

NFA31GD

NFA31GD

Series 1206/3216 (inch/mm)

3-terminal RC filter array.

(9)

c Equivalent Circuit

(10)

(7)
(1)

Input (Output)
(8)
(9)

(10)

(2)
(2)GND

(1)GND
(3)

(4)

(6)

0.80.1

1.10.5

(3)

3.20.2

(5)

(6)

c Packaging

1.60.2

(Bottom View)

Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

4000

Bulk(Bag)

100

: Electrode
0.05 min.

(4)

Output (Input)
No polarity.

0.80.2

0.40.15

(5)

0.05 min.
(in mm)

Refer to pages from p.156 to p.162 for mounting information.

c Rated Value (p: packaging code)

Part Number

Capacitance

Resistance

NFA31GD1006R84p

10pF 20%

6.8ohm 40%

NFA31GD1004704p

10pF 20%

47ohm 30%

NFA31GD1001014p

10pF 20%

100ohm 30%

NFA31GD4706R84p

47pF 20%

6.8ohm 40%

NFA31GD4703304p

47pF 20%

NFA31GD4704704p

Rated Current Rated Voltage

50mA

Insulation Resistance
Operating
(min.)
Temperature Range

6Vdc

1000M ohm

-40C to +85C

20mA

6Vdc

1000M ohm

-40C to +85C

15mA

6Vdc

1000M ohm

-40C to +85C

50mA

6Vdc

1000M ohm

-40C to +85C

33ohm 30%

20mA

6Vdc

1000M ohm

-40C to +85C

47pF 20%

47ohm 30%

20mA

6Vdc

1000M ohm

-40C to +85C

NFA31GD4701014p

47pF 20%

100ohm 30%

15mA

6Vdc

1000M ohm

-40C to +85C

NFA31GD1016R84p

100pF 20%

6.8ohm 40%

50mA

6Vdc

1000M ohm

-40C to +85C

NFA31GD1014704p

100pF 20%

47ohm 30%

20mA

6Vdc

1000M ohm

-40C to +85C

NFA31GD1011014p

100pF 20%

100ohm 30%

15mA

6Vdc

1000M ohm

-40C to +85C

Number of Circuit: 4

c Insertion Loss Characteristics

0

10

(50 - 50)

Chip Ferrite Bead

(8)

(50 - 50)

Signal Lines Type

Chip EMIFILr

(7)

(Top View)

Chip Common Mode Choke Coil

c Dimensions

10

NFA31GD1006R84

NFA31GD1016R84
30

40

NFA31GD4704704

20

NFA31GD1014704
30

40

50

50
1

10

100
Frequency (MHz)

1000

3000

(50 - 50)

10

100
Frequency (MHz)

1000

3000

(50 - 50)

10

10
NFA31GD1001014
NFA31GD4701014

20

NFA31GD1011014
30

40

Microwave Absorber

NFA31GD4703304
Insertion Loss (dB)

Insertion Loss (dB)

Block Type EMIFILr

Insertion Loss (dB)

Insertion Loss (dB)

NFA31GD1004704
NFA31GD4706R84

20

20

30

40

50

50
1

10

100
Frequency (MHz)

1000

3000

10

100
Frequency (MHz)

1000

3000

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

153

Chip EMIFILr

!Caution/Notice
!Caution

o Rating

Chip Ferrite Bead

Do not use products beyond the rated current and rated

voltage as this may create excessive heat and
deteriorate the insulation resistance.

o Soldering and Mounting

1. Self-heating
Please provide special attention when mounting chip
EMIFILr NFMppP/K series in close proximity to
other products that radiate heat.
The heat generated by other products may deteriorate
the insulation resistance and cause excessive heat in
this component.

2. NFL15ST_X Series Mounting Direction

Mount products in right direction, because products
have a direction. Wrong direction which is 180 rotated
from right direction cause fuming or partial dispersion,
because input or output signal terminals short-circuit
to ground.
NC
r
Input q
(Output)

NC
w
eOutput
(Input)

Input e
(Output)

w
GND

r
GND

Correct Connection

Wrong Connection

Notice
o Storage and Operating Conditions
<Operating Environment>
Do not use products in a chemical atmosphere such as
chlorine gas, acid or sulfide gas.
Do not use products in the environment close to the
organic solvent.
<Storage and Handling Requirements>
1. Storage Period
Should be used within 12 months.
Solderability should be checked if this period is
exceeded.
2. Storage Conditions
(1) Storage temperature: -10 to +40C
Relative humidity: 15 to 85%
Avoid sudden changes in temperature and humidity.
(2) Do not store products in a chemical atmosphere
such as chlorine gas, acid or sulfide gas.

Chip Common Mode Choke Coil

Chip EMIFILr
!Caution/Notice
Chip EMIFILr

qOutput
(Input)

In case of mounting 0402 or smaller size of NFM on

single-layered glass epoxy board, chip cracks will be
also occurred because of the same reason.
4. Component Mounting: 0402 size or smaller of NFM
If low bottom dead point of the pick-up nozzle is too
low, chip cracks will be occurred because an extra
power will be added to the chip during mounting.
Therefore, the bottom dead point of pick-up nozzle
must be set on/over the upper surface of the PCB.
Adjusting is required when the bottom dead point will
be set by correcting board warp. It is recommended
that using the larger pick-up nozzle than chip length
for avoiding what force impact will be centered to the
middle point of components. Before assembling,
please confirm its mounting accuracy under the best
condition.
Pick-up Nozzle
Shape of Pick-up Nozzle

o Notice (Soldering and Mounting)

Microwave Absorber

Block Type EMIFILr

1. Cleaning
Failure and degradation of a product are caused by
the cleaning method. When you clean in conditions
that are not in mounting information, please contact
Murata engineering.
2. Soldering
Reliability decreases with improper soldering methods.
Please solder by the standard soldering conditions
shown in mounting information.
3. Points of Attention about NFM Pattern Forms
The loaded stresses are different to a chip depend on
PCB materials and structures.
When the chip will be mounted on the metal PCB
contained alumina material, PCB heat
expansion/contraction will be a cause of chip cracks
because the coefficients of thermal expressions are
different between metal PCB and the chip itself.

Good
Poor
Pick-up Nozzle Position
in Component Placing Position Adjusting of
Bottom Dead Point

Longer Direction of
Pick-up Nozzle

5. Other
Noise suppression levels resulting from Murata's EMI
suppression filters EMIFILr may vary, depending on
the circuits and ICs used, type of noise, mounting
pattern, mounting location, and other operating
conditions. Be sure to check and confirm in advance
the noise suppression effect of each filter, in actual
circuits, etc. before applying the filter in a
commercial-purpose equipment design.

Continued on the following page.

!Note

154

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Chip EMIFILr

!Caution/Notice

o Handling

Chip EMIFILr
Chip EMIFILr
!Caution/Notice

Twisting

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Bending

Chip Ferrite Bead

1. Resin Coating
Using resin for coating/molding products may affect
the products performance.
So please pay careful attention in selecting resin.
Prior to use, please make the reliability evaluation with
the product mounted in your application set.
2. Caution for Use (NFW Series)
When you hold products with a tweezer, please hold
by the sides. Sharp materials, such as a pair of
tweezers or other material such as bristles of cleaning
brush, should not touch the winding portion of this
product to prevent breaking the wire. Mechanical
shock should not be applied to the products mounted
on the board to prevent breaking the core.
3. Handling of a Substrate
After mounting products on a substrate, do not apply
any stress to the product caused by bending or
twisting to the substrate when cropping the substrate,
inserting and removing a connector from the substrate
or tightening screw to the substrate.
Excessive mechanical stress may cause cracking in
the Product.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

155

NFp

Soldering and Mounting

Chip EMIFILr

NFp series suppress noise by conducting the high-frequency noise element to ground. Therefore, to obtain maximum
performance from these filters, the ground pattern should be made as large as possible during the PCB design stage. As
shown below, one side of the PCB is used for chip mounting, and the other is used for grounding.
Small diameter feedthrough holes are then used to connect the grounds on each side of the PCB. This reduces the
high-frequency impedance of the grounding and maximizes the filter's performance.
Land Pattern
+ Solder Resist
Land Pattern
Solder Resist

(in mm)

o Reflow Soldering
NFA31CC/NFA31GD

NFM15CC/NFM15PC

0.4

NFM18PS

0.4
0.6
1.0
2.2

Small diameter thru hole 0.2

0.4 0.1
1.2
1.5

0.6

Filled via
0.15

0.7

0.8 Pitch
3.8

0.75

0.25

Small diameter thru hole 0.2-0.3

0.25
0.3

NFM18CC/NFM18PC

0.4
0.6
1.2
1.5

2.6

0.3

NFA31CC
NFA31GD
NFM15CC
NFM15PC
NFM18CC
NFM18PC
NFM18PS
NFM21CC
NFM21PC
NFM21PS
NFR21GD

0.4
1.0
2.2

Chipand
EMIFILr
Soldering
Mounting
Chip EMIFILr

Chip Ferrite Bead

1. Standard Land Pattern Dimensions

1.3

4.2

0.05

0.8
1.2
2.0

R0.1 to R0.2 is preferred to obtain

high voltage withstanding

NFM21CC/NFM21PC/NFR21GD

NFM21PS
Small diameter thru hole 0.2-0.3

0.4
0.6
0.85
1.25
1.85
2.35

2.3

0.6
0.8
1.9

Chip Common Mode Choke Coil

Small diameter thru hole 0.4

0.6
1.4
2.6
0.8
1.2
1.6
1.8
2.6

o Reflow Soldering

Chip mounting side

NFM3DCC/NFM3DPC/NFM31PC/NFM41CC/NFM41PC
Small diameter thru hole 0.4

Size (mm)

Part
Number

a b c d e

NFM3DCC 1.0 1.4 2.5 4.4 1.0 2.0 2.4

NFM3DPC
NFM31PC 1.0 1.4 2.5 4.4 1.2 2.6 3.0
NFM41CC
NFM41PC 1.5 2.0 3.5 6.0 1.2 2.6 3.0

NFM31KC*1
Small diameter thru hole 0.4

*1 For large current

design, width of
signal land pattern
should be wider not
less than 1mm per
1A (1mm/A).
For example,
in case of 10A, signal
land pattern width
should be 10mm or
more.
(1mm/A*10A=10mm)

0.6
1.2
2.6
3.0

10mm or
more
(in case of
10A)
1.0
1.4
2.5
4.4

Part
Number

Size (mm)
a

NFM31PC 1.0 1.4 2.5 4.4 1.2 2.6 3.0

a
b
c
d

NFM41CC 1.5 2.0 3.5 6.0 1.2 2.6 3.0

NFM41PC

NFM31KC*1
Small diameter thru hole 0.4
10mm or
more
(in case of
10A)

*1 For large current

design, width of
signal land pattern
should be wider not
less than 1mm per
1A (1mm/A).
For example,
in case of 10A, signal
land pattern width
should be 10mm or
more.
(1mm/A*10A=10mm)

1.0
1.4
2.5
4.4

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

156

NFM3DCC 1.0 1.4 2.5 4.4 1.0 2.0 2.4

NFM3DPC

0.6
1.2
2.6
3.0

Small diameter thru hole 0.4

a
b
c
d

Microwave Absorber

o Flow Soldering

Chip mounting side

0.6
e
f
g

NFM3DCC
NFM3DPC
NFM31PC
NFM31KC
NFM41CC
NFM41PC

0.6
e
f
g

Block Type EMIFILr

Please contact us if using thinner land pad than 18m.

NFp Chip EMIFILr

Soldering and Mounting

Land Pattern
+ Solder Resist

o Reflow Soldering
NFL15ST

0.25
0.70
1.30

Small diameter thru hole

0.2-0.3

0.8
0.8

0.4
0.6
1.2
1.5

r
w

NFL18ST

1.2

0.25 0.25

NFL18SP
Small diameter thru hole
0.2-0.3
0.4

Directional Marking

0.75

NFL15ST
NFL18SP
NFL18ST
NFL21SP

(in mm)

0.4
0.6
1.0
2.2

0.4

Filled Via 0.15

Chip Ferrite Bead

Land Pattern
Solder Resist

1.0
2.0

2.3

0.6
0.8
1.9
0.6
1.4
2.6

o Reflow Soldering

NFW31SP
NFE31PT

Chip Common Mode Choke Coil

1.75

0.25

Filled via
0.1

0.5

1.3
2.0
2.35

2.5
0.25 0.25

0.25 0.25

0.35
0.5

NFA21SL
Small diameter thru hole 0.2

0.275
0.175

1.375
0.225
0.4
0.175
0.05

0.5

NFA18SL/NFA18SD

1.2
0.5

NFA18SL
NFA18SD
NFA21SL

Please contact us if using thinner land pad than 18m.

Chip EMIFILr
Soldering
Mounting
Chipand
EMIFILr

NFL21SP
Small diameter thru hole 0.4

1.5

o Reflow and Flow NFW31SP

o Reflow Soldering NFE31PT

1.0

2.6
3.0

Block Type EMIFILr

Small diameter thru hole 0.4

0.6
1.2
2.2
4.2

Microwave Absorber

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

157

NFp Chip EMIFILr

Soldering and Mounting

Land Pattern
+ Solder Resist
Land Pattern
Solder Resist

o Reflow Soldering

o Flow Soldering
Small diameter thru hole
0.4

0.6

3.0

2.6

1.6

Small diameter thru hole

0.4

2.0

1.5
3.8
4.8
9.0

Chipand
EMIFILr
Soldering
Mounting
Chip EMIFILr

4.8
8.8

o PCB Warping
PCB should be designed so that products are not
subjected to the mechanical stress caused by warping
the board.

1.2
3.2
3.6

Chip Ferrite Bead

NFE61PT

Products should be located in the sideways direction

(Length: a<b) to the mechanical stress.
a
b

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Poor example

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

158

Good example

(in mm)

NFp Chip EMIFILr

Soldering and Mounting

When flow soldering the EMI suppression filter, apply the

adhesive in accordance with the following conditions.
If too much adhesive is applied, then it may overflow into
the land or termination areas and yield poor solderability.
In contrast, if insufficient adhesive is applied, or if the
adhesive is not sufficiently hardened, then the chip may
become detached during flow soldering process.

When reflow soldering the chip EMI suppression filter, the

printing must be conducted in accordance with the
following cream solder printing conditions.
If too much solder is applied, the chip will be prone to
damage by mechanical and thermal stress from the PCB
and may crack.
Standard land dimensions should be used for resist and
copper foil patterns.

Chip Ferrite Bead

2. Solder Paste Printing and Adhesive Application

(in mm)
Adhesive Application

oGuideline of solder paste thickness:

100-150m: NFM15/18/21/3D/31, NFR
100-200m: NFM41

NFM3D/31/41 Series
Apply 0.1mg for NFM41C/41 and 0.06mg for
NFM3D/NFM31 of bonding agent at each chip.
Do not cover electrodes.

0.4

0.25
0.3
0.75

0.6
1.2

NFM18CC/18PC

NFM15CC/15PC

0.4
1.0
2.2

0.25
0.7
1.3

Bonding agent
Coating position of
bonding agent

NFM21CC/21PC
NFR21GD

NFM18PS

0.8
1.2
2.0

0.8
1.9

Chip Common Mode Choke Coil

0.05

0.6

0.4

1.2

0.1

NFM15CC
NFM15PC
NFM18CC
NFM18PC
NFM18PS
NFM21CC
NFM21PC
NFM21PS
NFM3DCC
NFM3DPC
NFM31PC
NFM31KC
NFM41CC
NFM41PC
NFR21GD

Solder Paste Printing

0.6
1.4
2.6

NFM3DCC/3DPC

NFM31PC/31KC

1.0
2.5
3.9

1.0

2.6

1.2

2.6

0.6

NFM41CC/41PC

0.6
1.0
2.5
4.4

Block Type EMIFILr

0.8
1.2
1.6
1.8
2.6

0.8
2.0

0.4
0.6
0.85
1.25
1.85

0.6

NFM21PS

Chip EMIFILr
Soldering
Mounting
Chipand
EMIFILr

Series

1.5
3.5
5.5

Microwave Absorber

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

159

NFp Chip EMIFILr

Soldering and Mounting

(in mm)
Series

Solder Paste Printing

oGuideline of solder paste thickness:

100-200m: NFA31CC/31GD

NFA31CC
NFA31GD

NFA31CC/31GD

Chip Ferrite Bead

0.6

0.4
1.0
2.2

2.6

0.8 Pitch

0.3

oGuideline of solder paste thickness:

100-150m: NFL, NFA18SL/18SD/21SL

0.4
1.2

0.25

0.25

NFL18SP
0.75

NFL15ST

0.25
1.30

0.4
1.0
2.0

NFL18ST

NFL21SP
0.6

0.6
1.2

0.70

Chip Common Mode Choke Coil

0.4
1.0
2.2

0.8
1.9

NFL15ST
NFL18SP
NFL18ST
NFL21SP
NFA18SL
NFA18SD
NFA21SL

0.4

0.6
1.4
2.6

NFA18SL/18SD

NFA21SL

1.375
0.5

0.35

1.5
0.5
0.25 0.25

NFW31SP Series
Apply 0.2mg of bonding agent at each chip.

2.6

0.6

oGuideline of solder paste thickness:

150-200m

Bonding agent

oGuideline of solder paste thickness:

150-200m

Coating positon of
bonding agent

Apply 1.0mg of bonding agent at each chip.

1.6
2.6

1.2
3.2

0.6

Microwave Absorber

1.75

1.3
2.0

0.6
2.2
4.2

NFE61PT

0.75

0.05

1.0

Block Type EMIFILr

NFW31SP
NFE31PT

0.225
0.4

0.25

1.2

0.5

0.175

0.175

Chipand
EMIFILr
Soldering
Mounting
Chip EMIFILr

Adhesive Application

1.5
4.8
8.8

Bonding agent

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

160

1.5
4.8
9.0
Bonding agent

NFp Chip EMIFILr

Soldering and Mounting

3. Standard Soldering Conditions

Solder: Use Sn-3.0Ag-0.5Cu solder. Use of Sn-Zn based

solder will deteriorate performance of products.
If using NFM series with Sn-Zn based solder, please
contact Murata in advance.

Chip Ferrite Bead

Flux:
o Use Rosin-based flux.
In case of using RA type solder, products should be
cleaned completely with no residual flux.
o Do not use strong acidic flux (with chlorine content
exceeding 0.20wt%)
o Do not use water-soluble flux.

(1) Soldering Methods

Use flow and reflow soldering methods only.
Use standard soldering conditions when soldering chip
EMI suppression filters.
In cases where several different parts are soldered, each
having different soldering conditions, use those
conditions requiring the least heat and minimum time.

For additional mounting methods, please contact Murata.

t2
Heating

T1

Limit Profile
Standard Profile

Time (s)

Standard Profile

Pre-heating

Heating
Temp. (T1)

Time. (t1)

Temp. (T2)

Time. (t2)

NFM3D/31/41

150C

60s min.

250C

4 to 6s

NFE61PT

150C

60s min.

250C

NFW31SP

150C

60s min.

250C

oReflow Soldering Profile

(Sn-3.0Ag-0.5Cu Solder)

Chip Common Mode Choke Coil

Pre-heating
t1

Series

Chip EMIFILr
Soldering
Mounting
Chipand
EMIFILr

T3
T2

Limit Profile
Cycle
of Flow

Heating

Cycle
of Flow

Temp. (T3)

Time. (t2)

2 times
max.

2653C

5s max.

2 times
max.

4 to 6s

2 times
max.

2653C

5s max.

2 times
max.

4 to 6s

2 times
max.

2653C

5s max.

1 time
max.

Temperature (C)

T4
T2
T1

T3

Block Type EMIFILr

oFlow Soldering Profile

(Sn-3.0Ag-0.5Cu Solder)

Temperature (C)

(2) Soldering Profile

180
150
Limit Profile
Pre-heating

t1
Standard Profile
t2
Time (s)

Standard Profile
Series

Limit Profile

Peak
Cycle
Temperature
of Reflow
(T2)
Time. (t1)

Heating
Temp. (T1)

Heating
Temp. (T3)

Time. (t2)

Peak
Cycle
Temperature
of Reflow
(T4)

NFM
NFA31CC/31GD, NFR

220C min.

30 to 60s

2453C

2 times
max.

230C min.

60s max.

260C/10s

2 times
max.

NFA18S/21S
(Except for NFA31CC/31GD)
NFE, NFL

220C min.

30 to 60s

2453C

2 times
max.

230C min.

60s max.

260C/10s

2 times
max.

NFW31SP

220C min.

30 to 60s

2453C

2 times
max.

230C min.

60s max.

260C/10s

1 time
max.

Microwave Absorber

90s30s

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

161

Chip Ferrite Bead

NFp Chip EMIFILr

Soldering and Mounting

(3) Reworking with Solder Iron

The following conditions must be strictly followed when
using a soldering iron.
Pre-heating: 150C 60s min.
Soldering iron power output / Tip diameter:
30W max. / 3mm max.*1
*1 NFM15: 30W max. / 2mm max.
Temperature of soldering iron tip / Soldering time / Times:
350C max. / 3-4s / 2 times*2
*2 NFM15: 340C max. / 3-4s / 1 time
NFE31PT152Z1E9: 280C max. / 10s max. / 2 times

Do not allow the tip of the soldering iron to directly

contact the chip.
For additional methods of reworking with a soldering iron,
please contact Murata engineering.

Following conditions should be observed when cleaning

chip EMI filter.
(1) Cleaning Temperature: 60C max. (40C max. for
alcohol type cleaner)
(2) Ultrasonic
Output: 20W/liter max.
Duration: 5 minutes max.
Frequency: 28 to 40kHz
(3) Cleaning Agent
The following list of cleaning agents have been tested on
the individual components. Evaluation of final assembly
should be completed prior to production.

(a) Alcohol cleaning agent

Isopropyl alcohol (IPA)
(b) Aqueous cleaning agent
Pine Alpha ST-100S
(4) Ensure that flux residue is completely removed.
Component should be thoroughly dried after aqueous
agent has been removed with deionized water.

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Chipand
EMIFILr
Soldering
Mounting
Chip EMIFILr

4. Cleaning

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

162

NFp

Packaging

Chip EMIFILr

(Paper Tape)
1.5 +0.1
-0

2.00.05

Direction of Feed

Chip Ferrite Bead

3.50.05
8.0

4.00.1

1.750.1

Minimum Quantity and Dimensions of 8mm Width Paper / Embossed Tape

c
c: Total Thickness of Tape

Minimum Qty. (pcs.)

Dimensions

Part Number
NFL15ST

180mm Reel

1.12

0.62

0.8 max.

330mm Reel

Paper Tape Embossed Tape Paper Tape Embossed Tape

10000

Bulk
500
(in mm)

<Paper>

<Embossed>
c
d

Direction of Feed
c: Depth of Cavity
(Embossed Tape)

There are holes in the cavities of the NFM31,

NFA18S and NFA21S_48 only.
NFA18S: 0.80.1, NFA21S_48: 1.0 +0.2
-0
NFM31: 1.0 +0.2
-0
1 NFM31: 3.50.1

c: Total Thickness of Tape

(Paper Tape)

Dimension of the cavity of embossed tape is measured at the bottom side.

Minimum Qty. (pcs.)

180mm Reel

330mm Reel

Paper Tape Embossed Tape Paper Tape Embossed Tape

Bulk

NFM15CC/
NFM15PC (Except for474/105)

1.15

0.75

0.75 max.

10000

500

NFM15PC474/105

1.15

0.65

0.6 max.

10000

500

NFM18CC/
NFM18PC (Except for105R/225B1A)
1.85
NFM18PS

1.05

0.9 max.

4000

500

NFM18PC105R/225B1A

1.1 max.

4000

500

NFL18SP/NFL18ST_H

0.9 max.
-

4000

1000

1.85

1.05

NFL21SP

2.3

1.55

1.1 max.

NFM21CC/21PC/21PS

2.3

1.55

1.1 max.

4000

500

NFM3DCC/3DPC

3.4

1.4

0.85

0.2

4000

500

NFM31PC/31KC

3.5

1.9

1.5

0.25

3000

500

1.1 max.

NFA18SL/18SD

1.8

1.0

0.7

0.25

4000

1000

NFA21SL_45

2.30

1.55

0.7

0.25

4000

1000

NFA21SL_48

2.25

1.45

1.05

0.25

4000

1000

NFA31GD/31CC

3.5

2.0

1.1 max.

4000

100

NFE31PT

3.6

1.8

1.85

0.2

2000

8000

500

NFR21GD

2.3

1.55

0.7

0.25

4000

500

NFW31SP

3.6

1.9

2.0

0.2

2000

7500

Block Type EMIFILr

Dimensions

Part Number

NFL18ST_X

Chip Common Mode Choke Coil

(in mm)
"Minimum Quantity" means the number of units of each delivery or order. The quantity should be an integral multiple of the "Minimum Quantity."
Continued on the following page.
!Note

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

163

Microwave Absorber

1 3.50.05
8.0

2.00.05
4.00.1 4.00.1 1.5 +0.1
-0

Chip EMIFILr
Packaging
Chip
EMIFILr

1.750.1

(Common to Paper Tape / Embossed Tape)

NFp Chip EMIFILr

Packaging

c
0.3

Part Number
12.0

+0.1

1.5 -0

5.50.05

Chip Ferrite Bead

2.00.05
4.00.1 4.00.1

1.750.1

Minimum Quantity and Dimensions of 12mm Width Embossed Tape

Dimensions

Minimum Qty. (pcs.)

180mm Reel 330mm Reel

NFM41CC/41PC

4.8

1.8

1.1

4000

Bulk
500

NFE61PT

7.2

1.9

1.75

2500

8000

500

Direction of Feed
c: Depth of Cavity

Dimension of the cavity is measured at the bottom side.

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Chip
EMIFILr
Packaging
Chip EMIFILr

"Minimum Quantity" means the number of units of each delivery or order. The quantity should be an integral multiple of the "Minimum Quantity."

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

164

(in mm)

Chip EMIFILr

Design Kits

Chip Ferrite Bead

NFp

Part Number

Quantity
(pcs.)

Capacitance

Rated Voltage
(Vdc)

Rated Current
(mA)

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

NFM15CC222D1A3
NFM15CC222D1C3
NFM15CC223C1A3
NFM15CC223C1C3
NFM18CC220U1C3
NFM18CC470U1C3
NFM18CC101R1C3
NFM18CC221R1C3
NFM18CC471R1C3
NFM18CC102R1C3
NFM18CC222R1C3
NFM18CC223R1C3
NFM21CC220U1H3
NFM21CC470U1H3
NFM21CC101U1H3
NFM21CC221R1H3
NFM21CC471R1H3
NFM21CC102R1H3
NFM21CC222R1H3
NFM21CC223R1H3

10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10

2200pF20%
2200pF20%
22000pF20%
22000pF20%
22pF20%
47pF20%
100pF20%
220pF20%
470pF20%
1000pF20%
2200pF20%
22000pF20%
22pF20%
47pF20%
100pF20%
220pF20%
470pF20%
1000pF20%
2200pF20%
22000pF20%

10
16
10
16
16
16
16
16
16
16
16
16
50
50
50
50
50
50
50
50

1000
1000
1000
1000
400
400
500
500
500
600
700
1000
700
700
700
700
1000
1000
1000
2000

Chip Common Mode Choke Coil

No.

Chip EMIFILr
Design
Kits
Chip
EMIFILr

oEKEMNFMCC-KIT (Chip EMIFILr Capacitor Type for Signal Lines)

oEKEMFA31E-KIT (Chip EMIFILr Capacitor Array Type / RC Combined Array Type)

No.

Part Number

Quantity
(pcs.)

Capacitance

Rated Voltage
(Vdc)

Rated Current
(mA)

1
2
3
4
5
6
7
8

NFA31CC220S1E4
NFA31CC470S1E4
NFA31CC101S1E4
NFA31CC221S1E4
NFA31CC471R1E4
NFA31CC102R1E4
NFA31CC222R1E4
NFA31CC223R1C4

10
10
10
10
10
10
10
10

22pF20%
47pF20%
100pF20%
220pF20%
470pF20%
1000pF20%
2200pF20%
22000pF20%

25
25
25
25
25
25
25
16

200
200
200
200
200
200
200
200

Part Number

Quantity
(pcs.)

Cut-off Frequency

Rated Voltage
(Vdc)

Rated Current
(mA)

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19

NFL15ST157X0J3
NFL15ST207X0J3
NFL15ST307X0J3
NFL15ST507X0J3
NFL18ST506H1A3
NFL18ST706H1A3
NFL18ST107H1A3
NFL18ST207H1A3
NFL18ST307H1A3
NFL18ST507H1A3
NFL18ST207X1C3
NFL18ST307X1C3
NFL18ST507X1C3
NFL18SP157X1A3
NFL18SP207X1A3
NFL18SP307X1A3
NFL18SP507X1A3
NFL21SP106X1C3
NFL21SP206X1C7

10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10

150MHz
200MHz
300MHz
500MHz
50MHz
70MHz
100MHz
200MHz
300MHz
500MHz
200MHz
300MHz
500MHz
150MHz
200MHz
300MHz
500MHz
10MHz
20MHz

6.3
6.3
6.3
6.3
10
10
10
10
10
10
16
16
16
10
10
10
10
16
16

50
50
50
50
75
75
75
100
100
100
150
200
200
100
100
100
100
100
100

Microwave Absorber

No.

Block Type EMIFILr

oEKEMFL18AG-KIT (Chip EMIFILr LC Combined Type)

Continued on the following page.

!Note

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

165

Design Kits

NFp Chip EMIFILr

Continued from the preceding page.

Part Number

Quantity
(pcs.)

Cut-off Frequency

Rated Voltage
(Vdc)

Rated Current
(mA)

20
21
22
23
24
25
26
27

NFL21SP506X1C3
NFL21SP706X1C3
NFL21SP107X1C3
NFL21SP157X1C3
NFL21SP207X1C3
NFL21SP307X1C3
NFL21SP407X1C3
NFL21SP507X1C3

10
10
10
10
10
10
10
10

50MHz
70MHz
100MHz
150MHz
200MHz
300MHz
400MHz
500MHz

16
16
16
16
16
16
16
16

150
150
200
200
250
300
300
300

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Chip
EMIFILr
Design
Kits
Chip EMIFILr

Chip Ferrite Bead

No.

No.

Part Number

28
29
30
31
32
33
34
35
36

NFW31SP106X1E4
NFW31SP206X1E4
NFW31SP506X1E4
NFW31SP107X1E4
NFW31SP157X1E4
NFW31SP207X1E4
NFW31SP307X1E4
NFW31SP407X1E4
NFW31SP507X1E4

Quantity Cut-off
(pcs.) Frequency
10
10
10
10
10
10
10
10
10

10MHz
20MHz
50MHz
100MHz
150MHz
200MHz
300MHz
400MHz
500MHz

Attenuation (dB min.)

10MHz
20MHz
50MHz 100MHz 150MHz 200MHz 300MHz 400MHz 500MHz
30
6dB max.
25
25
25
5
6dB max.
30
25
25
5
6dB max.
30
30
10
6dB max.
20
5
6dB max.
30
20
10
6dB max.
10
6dB max.
5
6dB max.
6dB max.
-

1GHz
30
30
30
30
30
30
15
10
10

Rated
Rated
Current Voltage
200mA
200mA
200mA
200mA
200mA
200mA
200mA
200mA
200mA

25V
25V
25V
25V
25V
25V
25V
25V
25V

oEKEMFA20AH-KIT (Chip EMIFILr LC Combined Array Type)

No.

Part Number

Quantity
(pcs.)

Cut-off Frequency

Rated Voltage
(Vdc)

Rated Current
(mA)

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23

NFA18SL506X1A45
NFA18SL137V1A45
NFA18SL187V1A45
NFA18SL207V1A45
NFA18SL227V1A45
NFA18SL307V1A45
NFA18SL357V1A45
NFA18SL407V1A45
NFA18SL487V1A45
NFA18SD187X1A45
NFA18SD207X1A45
NFA21SL506X1A48
NFA21SL806X1A48
NFA21SL207X1A45
NFA21SL207X1A48
NFA21SL307X1A45
NFA21SL307X1A48
NFA21SL287V1A45
NFA21SL287V1A48
NFA21SL317V1A45
NFA21SL317V1A48
NFA21SL337V1A45
NFA21SL337V1A48

10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10

50MHz
130MHz
180MHz
200MHz
220MHz
300MHz
350MHz
400MHz
480MHz
180MHz
200MHz
50MHz
80MHz
200MHz
200MHz
300MHz
300MHz
280MHz
280MHz
310MHz
310MHz
330MHz
330MHz

10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10

25
50
50
50
25
100
35
100
100
25
25
20
20
100
100
100
100
100
100
100
100
100
100

oEKEMNFMPAN-KIT (Chip EMIFILr for Large Current)

No.

Part Number

Quantity
(pcs.)

Capacitance

Rated Voltage
(Vdc)

Rated Current
(A)

1
2
3
4
5
6
7
8
9
10
11
12
13
14

NFM15CC222D1A3
NFM15CC222D1C3
NFM15CC223C1A3
NFM15CC223C1C3
NFM15PC473C1A3
NFM15PC473C1C3
NFM15PC104D0J3
NFM15PC104R1A3
NFM15PC224D0J3
NFM15PC224R1A3
NFM15PC474D0G3
NFM15PC474R0J3
NFM15PC105R0G3
NFM15PC435R0E3

10
10
10
10
10
10
10
10
10
10
10
10
10
10

2200pF20%
2200pF20%
22000pF20%
22000pF20%
0.047F20%
0.047F20%
0.1F20%
0.1F20%
0.22F20%
0.22F20%
0.47F20%
0.47F20%
1F20%
4.3F20%

10
16
10
16
10
16
6.3
10
6.3
10
4
6.3
4
2.5

1
1
1
1
1
1
2
2
2
2
2
2
2
2
Continued on the following page.

!Note

166

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

NFp Chip EMIFILr

Design Kits

Capacitance

Rated Voltage
(Vdc)

Rated Current
(A)

15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46

NFM18PC104R1C3
NFM18PC224R0J3
NFM18PC474R0J3
NFM18PC105R0J3
NFM18PC225B0J3
NFM18PC225B1A3
NFM18PS474R0J3
NFM18PS105R0J3
NFM18PS105D0J3
NFM21PC104R1E3
NFM21PC224R1C3
NFM21PC474R1C3
NFM21PC105B1A3
NFM21PC105B1C3
NFM21PC225B0J3
NFM21PC475B1A3
NFM21PS106B0J3
NFM31PC276B0J3
NFM41PC204F1H3
NFM41PC155B1E3
NFM31KC103R1H3
NFM31KC103R2A3
NFM31KC153R1H3
NFM31KC153R2A3
NFM31KC223R1H3
NFM31KC223R2A3
NFM31KC104R1H3
NFM31KC104R2A3
NFE31PT152Z1E9
NFE31PT222Z1E9
NFE61PT102E1H9
NFE61PT472C1H9

10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10

0.1F20%
0.22F20%
0.47F20%
1F20%
2.2F20%
2.2F20%
0.47F20%
1F20%
1F20%
0.1F20%
0.22F20%
0.47F20%
1F20%
1F20%
2.2F20%
4.7F20%
10F20%
27F20%
0.2F+80/-20%
1.5F20%
10000pF20%
10000pF20%
15000pF20%
15000pF20%
22000pF20%
22000pF20%
100000pF20%
100000pF20%
1500pF+50/-20%
2200pF50%
1000pF+80/-20%
4700pF+80/-20%

16
6.3
6.3
6.3
6.3
10
6.3
6.3
6.3
25
16
16
10
16
6.3
10
6.3
6.3
50
25
50
100
50
100
50
100
50
100
25
25
50
50

2
2
2
4
2
4
2
2
2
2
2
2
4
4
4
6
4
6
2
6
10
10
10
10
10
10
6
6
6
6
2
2

Chip EMIFILr
Design
Kits
Chip
EMIFILr

Quantity
(pcs.)

Chip Common Mode Choke Coil

Part Number

Microwave Absorber

Block Type EMIFILr

No.

Chip Ferrite Bead

Continued from the preceding page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

167

Memo

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

168

Chip Ferrite Bead

DL

p/PLp
170

Part Numbering

172

Series Line Up

174

Product Detail

177

!Caution/Notice

203

Soldering and Mounting

205

Packaging

212

Design Kits

214

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Series Introduction

Chip EMIFILr

Chip Common Mode Choke Coil

Large Current Common Mode Choke Coil for Automotive Available

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

DLp

Series Introduction

Chip Ferrite Bead

Common Mode Current

Magnetic flux caused by common mode

current accumulates and works as an
inductor.

Magnetic flux caused by differential mode

current cancel each other and does not work
as an inductor.

Differential Mode Current

Features,
Classification

Chip EMIFILr

Category

Chip Common Mode Choke Coil

Ultra high cut-off

frequency
for high speed
differential signal lines

Structure

)
High cut-off frequency
for high speed
differential signal lines

Low profile, small size, suitable for mobile

equipment.
Tight terminal pitch enables high density layout.
Ultra high cut-off frequency and its matching to line
impedance enables good transmission of high
speed signal.

DLW21SN_HQ2
DLW21HN_HQ2

Ultra high self-resonance frequency enables high

cut-off frequency.
Its matching to line impedance enables good
transmission of high speed signal.

Multilayer
type

DLM11SN

Enables noise suppression for differential signal

line without distortion in high-speed signal
transmission.

Film type

DLP0QSN
DLP0NS
DLP11SN
DLP11RN
DLP2AD

Low profile, small size, suitable for mobile

equipment.
Tight terminal pitch enables high density layout.
High cut-off frequency enables good transmission
of high speed signal.

DLW21SN_SQ2
DLW31S
DLW21HN_SQ2

Ultra high self-resonance frequency enables high

cut-off frequency.
DLW21H is designed as low profile.

DLP31S
DLP31D

Low profile,small size, suitable for mobile

equipment.
Tight terminal pitch enables high density layout.

Film type

Block Type EMIFILr

Wound type
For general differential
signal lines

Comments

DLP0QSA
DLP0NSA
DLP11SA
DLP11RB
DLP11TB
DLP2ADA

Wound type

High cut-off frequency

High Coupling
For high speed
differential signal lines

Part Number

Film type

DLW5AH
Large current
High coupling
(For power lines)

Wound type

DLW5BS
DLW5AT

Large current (6A max.), suitable for input

connector from an AC adaptor.
DLW5AT/DLW5BT is designed as low profile.

Microwave Absorber

DLW5BT
Relative high differential
mode impedance
Low coupling
(For audio lines)
Large current
Automotive Available
(For power lines)

Available up to 18A

Multilayer
type

DLM11G

Modified differential mode impedance is higher than

other common mode choke coils; this feature
makes it possible to suppress both common mode
and differential mode noise.
Ideal to keep low distortion audio signal.

Winding type
Cased structure

PLT10HH

Large current, high reliability, suitable for motors in

automobiles.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

170

Noise
Suppression DLP/DLW Series
Example

Mechanism of Skew Improvement

Skew Improvement Effect of Common Mode Choke Coil

Waveform rises (or falls)

Waveform is equivalent to 1000Mbps signal

Chip Ferrite Bead

Example of Skew Improvement by Common Mode Choke Coil

(Tested using pulse generator waveform)
Current change generates
magnetic flux on a ferrite core

Waveform with intentionally made skew (skew: 100ps)

Skew is improved by common mode choke coil

Electromotive force is
generated on another line

Chip EMIFILr

This electromotive force works to

decrease the delay of the waveform

Noise Suppression of Common Mode Choke Coil in HDMI Line

60

55

55

50
45
40
35

Without filter
DLW21SN900HQ2

25
20
1000

1500

2000

2500

3000

3500

4000

4500

50
45
40
35
30

Without filter
DLP11SA900HL2

25
20
1000

5000

1500

2000

Frequency (MHz)

Test Example of HDMI1.3

Waveform Transmission

2500

3000

3500

4000

4500

5000

Frequency (MHz)

ESD protection device only

Film Type DLP11SN900HL2

(Cut-off frequency is lowest in the table below)

~Using ESD protection device

LXES15AAA1-100 (0.05pF)~

Block Type EMIFILr

30

Chip Common Mode Choke Coil

60

Noise Level (dBV/m)

Noise Level (dBV/m)

Device under test / Transmitter : game machine

/ Receiver : projector
/ Cable : HDMI categoly 2 3m cable
Test resolution / 1080p Deep color 12bit (Data 1.11GHz) DVD play mode

Signal frequency : 1.11GHz (Deep color 12bit)

Specification
satisfied

Video signal generator

CLOCK

Film Type
DLP11SA900HL2

Film Type Array

DLP2ADN900HL4

Over 10GHz

Around 6GHz

Around 4GHz

Specification satisfied

Specification satisfied

Specification satisfied

Rise time: 83.4ps

Fall time: 77.4ps

Rise time: 90.4ps

Fall time: 85.5ps

Rise time: 100ps

Fall time: 97.4ps

Microwave Absorber

Wound Type
DLW21SN900HQ2
DATA

common mode choke coil ESD protection device 0.05pF

Cut-off Frequency
Judge
Transition Time

Each common mode choke coil can keep the waveform and satisfy the specification.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

171

DL p
Chip Ferrite Bead

(Part Number)

Chip Common Mode Choke Coil

DL

21 S

e r t

371 S

u i o !0

qProduct ID

tCategory
Code

Product ID
DL

Part Numbering

Chip Common Mode Choke Coils

Category

A
B

Chip EMIFILr

wStructure

Code

Structure

Wire Wound Type

Multilayer Type

Film Type

eDimensions (LgW)
Dimensions (LgW)

EIA

0Q

0.65g0.5mm

025020

0N

0.85g0.65mm

03025

11

1.25g1.0mm

0504

1N

1.5g0.65mm

05025

Chip Common Mode Choke Coil

Code

Expressed by a letter.

yImpedance
Typical impedance at 100MHz is expressed by three figures. The
unit is in ohm (). The first and second figures are significant
digits, and the third figure expresses the number of zeros that
follow the two figures.
yInductance (DLW43SH)
Expressed by three figures. The unit is micro-henry (H). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures.

21

2.0g1.2mm

0805

2A

2.0g1.0mm

0804

31

3.2g1.6mm

1206

43

4.5g3.2mm

1812

5A

5.0g3.6mm

2014

5B

5.0g5.0mm

2020

uCircuit
Code

Circuit

Block Type EMIFILr

rFeatures (1)

Expressed by a letter.

Code

Type

Magnetically Shielded One Circuit Type

Magnetically Shielded Two Circuit Type

iFeatures (2)

Open Magnetic One Circuit Type

Magnetically Shielded Audio Type

Code

R/T

One Circuit Low Profile Type

Features

K
P

Expressed by a letter.

L
Q
Y
oNumber of Signal Lines

Microwave Absorber

Code

Number of Signal Lines

Two Lines

Four Lines

!0Packaging
Code

Packaging

Embossed Taping (330mm Reel)

DLW5AH/DLW5BS/DLW5BT

Series

Embossed Taping (180mm Reel)

All Series

Bulk

All Series

Paper Taping (180mm Reel)

DLP0QS/DLM11G

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

172

PL p

Part Numbering

T 10H H 102 6R0 P N B

e

u i o

qProduct ID
Product ID
PL

Common Mode Choke Coils

wType
Code

Type

DC Type

eApplications
Code

Applications

10H

for DC Line High-frequency Type

rFeatures
Code

Features

for Automotive

Chip Ferrite Bead

q w

tImpedance
Expressed by three figures. The unit is ohm (). The first and
second figures are significant digits, and the third figure
expresses the number of zeros that follow the two figures.
yRated Current
Expressed by three figures. The unit is ampere (A). The first and
second figures are significant digits, and the third figure
expresses the number of zeros that follow the two figures.
A decimal point is expressed by the capital letter "R." In this case,
all figures are significant digits.

Chip EMIFILr

PL

uWinding Mode
Code

Winding Mode

Aligned Winding Type

iLead Dimensions
Code

Lead Dimensions

No Lead Terminal (SMD)

Chip Common Mode Choke Coil

(Part Number)

Common Mode Choke Coil

oPackaging
Packaging

Bulk

PLT10H

Series

Embossed Taping (178mm/180mm Reel)

PLT10H

Embossed Taping (330mm Reel)

PLT10H

Microwave Absorber

Block Type EMIFILr

Code

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

173

DL p

Chip Common Mode Choke Coil

Type

Size Code Thickness

in inch (in mm) (mm)

Multilayer Type for Audio Lines 0504(1210) p184

p185
Multilayer Type for
Differential Signal Lines 0504(1210)
Chip Ferrite Bead

p186

025020(0605)
p187

03025(0806)

p189

Chip EMIFILr

Film Type
for Differential
Signal Lines

0504(1210)

Block Type EMIFILr

Chip Common Mode Choke Coil

p190

p191
p192

1206(3216)
p193

05025(1506)
p194

Film Array Type

for Differential
Signal Lines

0804(2010)

p196

1206(3216)

Microwave Absorber

p197

0805(2012)

Wire Wound Type

for Differential
Signal Lines

p198

0.5
0.5
0.5
0.3
0.3
0.3
0.3
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.5
0.5
0.5
0.3
1.15
1.15
1.15
0.45
0.45
0.45
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
1.15
1.15
1.15
1.15
1.15
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2

Part Number

DLM11GN601SD2
DLM11SN450HY2
DLM11SN900HY2
DLP0QSN600HL2
DLP0QSA070HL2
DLP0QSA150HL2
DLP0QSA350HL2
DLP0NSC280HL2
DLP0NSN350HL2
DLP0NSN670HL2
DLP0NSN900HL2
DLP0NSN121HL2
DLP0NSA070HL2
DLP0NSA150HL2
DLP11SN670SL2
DLP11SN121SL2
DLP11SN161SL2
DLP11SN900HL2
DLP11SN201HL2
DLP11SN241HL2
DLP11SN281HL2
DLP11SN331HL2
DLP11SA350HL2
DLP11SA670HL2
DLP11SA900HL2
DLP11RN450UL2
DLP11RB150UL2
DLP11RB400UL2
DLP11TB800UL2
DLP31SN121ML2
DLP31SN221ML2
DLP31SN551ML2
DLP1NDN350HL4
DLP1NDN670HL4
DLP1NDN900HL4
DLP2ADA350HL4
DLP2ADA670HL4
DLP2ADA900HL4
DLP2ADN670HL4
DLP2ADN900HL4
DLP2ADN121HL4
DLP2ADN161HL4
DLP2ADN201HL4
DLP2ADN241HL4
DLP2ADN281HL4
DLP31DN900ML4
DLP31DN131ML4
DLP31DN201ML4
DLP31DN321ML4
DLP31DN441ML4
DLW21SN670SQ2
DLW21SN900SQ2
DLW21SN121SQ2
DLW21SN181SQ2
DLW21SN261SQ2
DLW21SN371SQ2
DLW21SN501SK2
DLW21SN670HQ2
DLW21SN900HQ2
DLW21SN121HQ2
DLW21SN181XQ2
DLW21SN261XQ2

Series Line Up
Common Mode Impedance
Rated Current
(at 100MHz/20C)

600ohm25%
45ohm25%
90ohm25%
60ohm25%
7ohm2ohm
15ohm5ohm
35ohm10ohm
28ohm20%
35ohm10ohm
67ohm20%
90ohm20%
120ohm20%
7ohm2ohm
15ohm5ohm
67ohm20%
120ohm20%
160ohm20%
90ohm20%
200ohm20%
240ohm20%
280ohm20%
330ohm20%
35ohm20%
67ohm20%
90ohm20%
45ohm25%
15ohm5ohm
40ohm10ohm
80ohm25%
120ohm20%
220ohm20%
550ohm20%
35ohm20%
67ohm20%
90ohm20%
35ohm20%
67ohm20%
90ohm20%
67ohm20%
90ohm20%
120ohm20%
160ohm20%
200ohm20%
240ohm20%
280ohm20%
90ohm20%
130ohm20%
200ohm20%
320ohm20%
440ohm20%
67ohm25%
90ohm25%
120ohm25%
180ohm25%
260ohm25%
370ohm25%
500ohm25%
67ohm25%
90ohm25%
120ohm25%
180ohm25%
260ohm25%

100mA
100mA
100mA
50mA
100mA
100mA
100mA
100mA
100mA
110mA
100mA
90mA
100mA
100mA
180mA
140mA
120mA
150mA
110mA
100mA
90mA
80mA
170mA
150mA
150mA
100mA
100mA
100mA
100mA
100mA
100mA
100mA
100mA
80mA
60mA
150mA
130mA
120mA
140mA
130mA
120mA
100mA
90mA
80mA
80mA
160mA
120mA
100mA
80mA
70mA
400mA
330mA
370mA
330mA
300mA
280mA
250mA
320mA
280mA
280mA
240mA
220mA
Continued on the following page.

!Note

174

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

DLp Chip Common Mode Choke Coil Series Line Up

p199

0805(2012)

p200

1206(3216)

p201

Wire Wound Type for

Differential Signal Lines 1812(4532)
Automotive Type
p177
p179

p182

2014(5036)

Wire Wound Type

for Power Lines
and Signal Lines

p177

p179

2020(5050)

DLW21SN491XQ2
DLW21SR670HQ2
DLW21HN670SQ2
DLW21HN900SQ2
DLW21HN121SQ2
DLW21HN181SQ2
DLW21HN670HQ2
DLW21HN900HQ2
DLW21HN121HQ2
DLW31SN900SQ2
DLW31SN161SQ2
DLW31SN261SQ2
DLW31SN601SQ2
DLW31SN102SQ2
DLW31SN222SQ2
DLW43SH110XK2
DLW43SH220XK2
DLW43SH510XK2
DLW43SH101XK2
DLW43SH101XP2
DLW5AHN402SQ2
DLW5ATN111SQ2
DLW5ATN401SQ2
DLW5ATN501SQ2
DLW5ATN851SQ2
DLW5ATN272SQ2
DLW5ATN500MQ2
DLW5ATN151MQ2
DLW5ATN331MQ2
DLW5ATN501MQ2
DLW5ATN112MQ2
DLW5ATN111TQ2
DLW5ATN231TQ2
DLW5ATN401TQ2
DLW5ATN501TQ2
DLW5BSM501TQ2
DLW5BSM601TQ2
DLW5BSM801TQ2
DLW5BSM191SQ2
DLW5BSM351SQ2
DLW5BSM102SQ2
DLW5BSM152SQ2
DLW5BSM302SQ2
DLW5BTM101SQ2
DLW5BTM251SQ2
DLW5BTM501SQ2
DLW5BTM102SQ2
DLW5BTM142SQ2
DLW5BTM101TQ2
DLW5BTM251TQ2
DLW5BTM501TQ2
DLW5BTM102TQ2
DLW5BTM142TQ2

490ohm25%
67ohm25%
67ohm25%
90ohm25%
120ohm25%
180ohm25%
67ohm25%
90ohm25%
120ohm25%
90ohm25%
160ohm25%
260ohm25%
600ohm25%
1000ohm25%
2200ohm25%
4000ohm (Typ.)
110ohm (Typ.)
400ohm (Typ.)
500ohm (Typ.)
850ohm (Typ.)
2700ohm (Typ.)
50ohm (Typ.)
150ohm (Typ.)
330ohm (Typ.)
500ohm (Typ.)
1100ohm (Typ.)
100ohm (Typ.)
230ohm (Typ.)
400ohm (Typ.)
500ohm (Typ.)
500ohm (Typ.)
600ohm (Typ.)
800ohm (Typ.)
190ohm (Typ.)
350ohm (Typ.)
1000ohm (Typ.)
1500ohm (Typ.)
3000ohm (Typ.)
100ohm (Typ.)
250ohm (Typ.)
500ohm (Typ.)
1000ohm (Typ.)
1400ohm (Typ.)
100ohm (Typ.)
250ohm (Typ.)
500ohm (Typ.)
1000ohm (Typ.)
1400ohm (Typ.)

190mA
400mA
330mA
330mA
280mA
250mA
240mA
220mA
200mA
370mA
340mA
310mA
260mA
230mA
200mA
360mA
310mA
230mA
200mA
170mA
200mA
5000mA
2000mA
1500mA
1500mA
1000mA
6000mA
5000mA
4000mA
2500mA
2000mA
5000mA
4000mA
2500mA
2000mA
1000mA
1400mA
2000mA
5000mA
2000mA
1500mA
1000mA
500mA
6000mA
5000mA
4000mA
2000mA
1500mA
6000mA
5000mA
4000mA
2500mA
2000mA

Microwave Absorber

p182

1.2
1.2
0.9
0.9
0.9
0.9
0.9
0.9
0.9
1.9
1.9
1.9
1.9
1.9
1.9
2.6
2.6
2.6
2.6
2.7
4.3
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
2.35
2.35
2.35
2.35
2.35
2.35
2.35
2.35
2.35
2.35

Chip Ferrite Bead

p197

Common Mode Impedance

Rated Current
(at 100MHz/20C)

Chip EMIFILr

p198

Part Number

Chip Common Mode Choke Coil

Wire Wound Type

for Differential
Signal Lines

Size Code Thickness

in inch (in mm) (mm)

Block Type EMIFILr

Type

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

175

PL p
Type

Large Current Common Mode Choke Coil for Automotive Available

Size
Thickness
in inch (in mm) (mm)
p202

PLT10HH450180PN
PLT10HH101150PN
PLT10HH401100PN
PLT10HH501100PN
PLT10HH9016R0PN
PLT10HH1026R0PN

Common Mode Impedance

Rated Current
(at 10MHz/20C)

45ohm (Typ.)
100ohm (Typ.)
400ohm (Typ.)
500ohm (Typ.)
900ohm (Typ.)
1000ohm (Typ.)

18A
15A
10A
10A
6A
6A

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Chip EMIFILr

Chip Ferrite Bead

Large Current
Common Mode Choke Coil (12.9x6.6)
for Automotive Available

9.4
9.4
9.4
9.4
9.4
9.4

Part Number

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

176

Series Line Up

DLW Series

Universal Type [Power Lines/Signal Lines] Chip Common Mode Choke Coil

DLW5AH/DLW5BS

DLW5AH/DLW5BS

2014/5036 (inch/mm)
Series 2020/5050 (inch/mm)

5A max., common mode choke coil for power lines.

c Dimensions

c Equivalent Circuit
(1)

0.5 min.

(1)

No polarity.

(2)

1.7 1.3 1.7

0.3 0.3 0.3

position of wiring should

* Starting
be covered with resin.

(4)

c Packaging
Code

Packaging

: Electrode

(3)

1.3 0.9 1.3

0.3 0.3 0.3

(in mm)

c Dimensions
3.00.5

DLW5BS

(3)

(4)

(L) 5.00.3

Minimum
Quantity

180mm Reel Embossed Tape

400

330mm Reel Embossed Tape

1500

Bulk(Bag)

100

c Equivalent Circuit
(1)

Chip EMIFILr

(W) 3.60.3

Chip Ferrite Bead

0.45 min.

(2)

(T) 4.3 max.

DLW5AH

(2)

0.50.3

(Top)

(3)

(4)

1.30.3

(4)

1.30.3

(Bottom)

c Packaging

(T) 4.5 max.

0.5 min.
(L) 5.00.3

Code

Packaging

: Marking
: Electrode

(3) 1.30.3
0.90.3

Minimum
Quantity

180mm Reel Embossed Tape

400

330mm Reel Embossed Tape

1500

Bulk(Bag)

100

(in mm)

Refer to pages from p.205 to p.209 for mounting information.

c Rated Value (p: packaging code)

Common Mode Impedance Common Mode Impedance Rated
(at 10MHz/20C)
(at 100MHz/20C)
Current

Rated Insulation
Resistance
Voltage
(min.)

Withstand
Voltage

DC Resistance

DLW5AHN402SQ2p

4000ohm (Typ.)

200mA 50Vdc

10M ohm

125Vdc

3.0ohm max.

DLW5BSM501TQ2p

2800ohm 40%

500ohm (Typ.)

1000mA 50Vdc

10M ohm

125Vdc

0.23ohm max.

DLW5BSM601TQ2p

1200ohm 40%

600ohm (Typ.)

1400mA 50Vdc

10M ohm

125Vdc

0.12ohm max.
0.056ohm max.

DLW5BSM801TQ2p

550ohm 40%

800ohm (Typ.)

2000mA 50Vdc

10M ohm

125Vdc

DLW5BSM191SQ2p

190ohm (Typ.)

5000mA 50Vdc

10M ohm

125Vdc

0.02ohm max.

DLW5BSM351SQ2p

350ohm (Typ.)

2000mA 50Vdc

10M ohm

125Vdc

0.04ohm max.

DLW5BSM102SQ2p

1000ohm (Typ.)

1500mA 50Vdc

10M ohm

125Vdc

0.06ohm max.

DLW5BSM152SQ2p

1500ohm (Typ.)

1000mA 50Vdc

10M ohm

125Vdc

0.1ohm max.

DLW5BSM302SQ2p

3000ohm (Typ.)

500mA 50Vdc

10M ohm

125Vdc

0.3ohm max.

Operating Temperature Range: -25C to +85C (DLW5AH), -40C to +105C (DLW5BS_TQ2), -40C to +85C (DLW5BS_SQ2)

Block Type EMIFILr

Part Number

Universal Type [Power Lines/Signal Lines]

Chip Common Mode Choke Coil

1.70.3

1.70.3

3.60.3
(W) 5.00.3
(1)
(2)

0.45 min.

No polarity.

Number of Circuit: 1

Microwave Absorber

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

177

DLW Series
Universal Type [Power Lines/Signal Lines] Chip Common Mode Choke Coil
DLW5AH Series 2014/5036 (inch/mm) / DLW5BS Series 2020/5050 (inch/mm)

DLW5AH/DLW5BS

c Impedance-Frequency Characteristics
DLW5AH_SQ2/DLW5BS_SQ2 Series

DLW5BS_TQ2 Series

100000

10000

1000
10000

DLW5AHN402SQ2
DLW5BSM302SQ2
DLW5BSM152SQ2
DLW5BSM102SQ2
DLW5BSM351SQ2
DLW5BSM191SQ2

1000

Impedance ()

Impedance ()

Chip Ferrite Bead

Common mode

Common mode

DLW5BSM501TQ2

100

DLW5BSM601TQ2
DLW5BSM801TQ2
10
DLW5BSM501TQ2

100

DLW5BSM601TQ2

DLW5AHN402SQ2
DLW5BSM302SQ2
DLW5BSM152SQ2
Differential mode

DLW5BSM102SQ2
DLW5BSM351SQ2
DLW5BSM191SQ2

DLW5BSM801TQ2
Differential mode

0.1

10
1

10

100

1000

10
Frequency (MHz)

c Notice (Rating)
In operating temperature exceeding +75C,
derating of current is necessary for
DLW5BSM191SQ2.
Please apply the derating curve shown in
chart according to the operating
temperature.

In operating temperature exceeding +65C,

derating of current is necessary for
DLW5BS_TQ2 series. Please apply the
derating curve shown in chart according to
the operating temperature.

Derating of Rated Current

Derating of Rated Current

2500

5
Rated Current (mA)

Rated Current (A)

DLW5BSM191SQ2
4.75

4.5

2000

DLW5BSM801TQ2

1500
1400
1000

DLW5BSM601TQ2
DLW5BSM501TQ2

500
0

10

20

30

40

50

60

70 80 90 100
75C 85C

20

40

65
60

80

105
100
120

Operating Temperature (C)

Operating Temperature (C)

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Universal Type [Power Lines/Signal Lines]

Chip EMIFILr

Frequency (MHz)

100

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

178

1000

DLW Series

Universal Type [Power Lines/Signal Lines] Chip Common Mode Choke Coil

DLW5AT/DLW5BT

DLW5AT/DLW5BT

2014/5036 (inch/mm)
Series 2020/5050 (inch/mm)

Low profile wire-wound common choke coil for power lines.

c Equivalent Circuit

1.70.3

1.30.3

(1)

(L) 5.00.3

0.45 min.

0.5 min.
(W) 3.60.3
(2)

(T) 2.200.15

(1)

(3)

(4)
No polarity.

c Packaging
Packaging

(4)

(3)

: Electrode

1.30.3

0.90.3

(in mm)

c Dimensions

180mm Reel Embossed Tape

700

330mm Reel Embossed Tape

2500

Bulk(Bag)

100

c Equivalent Circuit

3.00.5

Minimum
Quantity

(1)

Chip EMIFILr

Code
1.70.3
1.30.3

DLW5BT

(2)

Chip Ferrite Bead

c Dimensions

DLW5AT

(2)

0.50.3

(Top)

(3)

(4)

1.30.3

(4)

(2)

(3)

1.30.3

(1)

0.45 min.

0.5 min.
(L) 5.00.3
(Bottom)

1.30.3

0.90.3

c Packaging
Code

Packaging

: Marking
: Electrode

Minimum
Quantity

180mm Reel Embossed Tape

700

330mm Reel Embossed Tape

2500

Bulk(Bag)

100

(in mm)

Refer to pages from p.205 to p.209 for mounting information.

c Rated Value (p: packaging code)

Part Number

Common Mode Impedance

(at 100MHz/20C)

Rated
Current

Rated
Voltage

DLW5ATN111SQ2p

110ohm (Typ.)

5000mA

50Vdc

10M ohm

125Vdc

0.020ohm max.

DLW5ATN401SQ2p

400ohm (Typ.)

2000mA

50Vdc

10M ohm

125Vdc

0.034ohm max.

DLW5ATN501SQ2p

500ohm (Typ.)

1500mA

50Vdc

10M ohm

125Vdc

0.056ohm max.

DLW5ATN851SQ2p

850ohm (Typ.)

1500mA

50Vdc

10M ohm

125Vdc

0.073ohm max.

DLW5ATN272SQ2p

2700ohm (Typ.)

1000mA

50Vdc

10M ohm

125Vdc

0.12ohm max.

DLW5BTM101SQ2p

100ohm (Typ.)

6000mA

50Vdc

10M ohm

125Vdc

0.013ohm max.

DLW5BTM251SQ2p

250ohm (Typ.)

5000mA

50Vdc

10M ohm

125Vdc

0.020ohm max.

DLW5BTM501SQ2p

500ohm (Typ.)

4000mA

50Vdc

10M ohm

125Vdc

0.027ohm max.

DC Resistance

DLW5BTM102SQ2p

1000ohm (Typ.)

2000mA

50Vdc

10M ohm

125Vdc

0.034ohm max.

DLW5BTM142SQ2p

1400ohm (Typ.)

1500mA

50Vdc

10M ohm

125Vdc

0.056ohm max.

Operating Temperature Range: -40C to +85C

Block Type EMIFILr

Insulation Resistance Withstand

(min.)
Voltage

Universal Type [Power Lines/Signal Lines]

Chip Common Mode Choke Coil

1.70.3

1.70.3

3.60.3
(W) 5.00.3

(T) 2.350.15

No polarity.

Number of Circuit: 1

Microwave Absorber

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

179

DLW Series
Universal Type [Power Lines/Signal Lines] Chip Common Mode Choke Coil
DLW5AT Series 2014/5036 (inch/mm) / DLW5BT Series 2020/5050 (inch/mm)

DLW5AT/DLW5BT

c Impedance-Frequency Characteristics
DLW5AT Series

DLW5BT Series
10000

10000

Common mode
DLW5BTM142SQ2

DLW5ATN272SQ2
DLW5ATN851SQ2
DLW5ATN501SQ2
DLW5ATN401SQ2
DLW5ATN111SQ2

100

DLW5BTM102SQ2

1000

DLW5BTM501SQ2

10
DLW5ATN272SQ2
DLW5ATN851SQ2
DLW5ATN501SQ2
DLW5ATN401SQ2
DLW5ATN111SQ2

Impedance ()

1000

Impedance ()

Chip Ferrite Bead

Common mode

10

100

100

DLW5BTM101SQ2

10

Differential mode

0.1

DLW5BTM251SQ2

DLW5BTM101SQ2
DLW5BTM251SQ2
DLW5BTM501SQ2
DLW5BTM102SQ2
DLW5BTM142SQ2 Differential mode

1
1

1000

10

100

1000

Frequency (MHz)

c Notice (Rating)
In operating temperature exceeding +60C,
derating of current is necessary for
DLW5AT series. Please apply the derating
curve shown in chart according to the
operating temperature.

In operating temperature exceeding +60C,

derating of current is necessary for the
following part name of DLW5BT series.
Please apply the derating curve shown in
chart according to the operating
temperature.

Derating of Rated Current

Derating of Rated Current

7000
6000

DLW5ATN111SQ2

5000

Rated Current (mA)

Rated Current (mA)

6000

4000
3000
DLW5ATN401SQ2
DLW5ATN501SQ2

2000
1500
1000

5000
4750
4000
3400
3000

DLW5BTM101SQ2
DLW5BTM251SQ2
DLW5BTM501SQ2

2000
1000

0
0

10

20

30

40

50

60

70

85
80 90

Operating Temperature (C)

0
0

20

40

60
65

80
85

Operating Temperature (C)

2000
Rated Current (mA)

Block Type EMIFILr

Chip Common Mode Choke Coil

Universal Type [Power Lines/Signal Lines]

Chip EMIFILr

Frequency (MHz)

DLW5ATN851SQ2

1500

1300
DLW5ATN272SQ2

1000

900

500

0
0

10

20

30

40

50

60

75 85
70 80 90

Microwave Absorber

Operating Temperature (C)

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

180

100

DLW Series

Universal Type [Power Lines/Signal Lines] Chip Common Mode Choke Coil

DLW5AT/DLW5BT

DLW5AT/DLW5BT

Series (105degreeC available type)

Low profile wire-wound common choke coil for power lines. (105degreeC available type)

0.5 min.

1.30.3

1.70.3

(W) 3.60.3
(1)

(L) 5.00.3

0.45 min.

(1)

(2)

No polarity.

Packaging

(3)

: Electrode

1.30.3

(in mm)

c Dimensions

0.45 min.

(L) 5.00.3

(2)

(T) 2.200.15

1.70.3

1.30.3

180mm Reel Embossed Tape

700

330mm Reel Embossed Tape

2500

Bulk(Bag)

100

(1)

0.5 min.

(1)

L
K

c Equivalent Circuit

(W) 3.60.3

Minimum
Quantity

Chip EMIFILr

Code
1.70.3

(4)

0.90.3

(2)

(3)

(4)
No polarity.

c Packaging
Code

Packaging

1.70.3
1.30.3

(4)

(3)

: Electrode

1.30.3

0.90.3

DLW5BT_TQ2

(3)

(4)

c Packaging

1.30.3

DLW5AT_TQ2

(2)

Chip Ferrite Bead

c Equivalent Circuit

(in mm)

c Dimensions

180mm Reel Embossed Tape

700

330mm Reel Embossed Tape

2500

Bulk(Bag)

100

c Equivalent Circuit

3.00.5

Minimum
Quantity

(1)

(2)

0.50.3

(Top)

Universal Type [Power Lines/Signal Lines]

Chip Common Mode Choke Coil

c Dimensions

(T) 2.200.15

DLW5AT_MQ2

(3)

(4)

1.70.3

1.30.3

(4)

(2)

(3)

1.30.3

(1)

(Bottom)

1.30.3

0.90.3

c Packaging
Code

Packaging

: Marking
: Electrode

Minimum
Quantity

180mm Reel Embossed Tape

700

330mm Reel Embossed Tape

2500

Bulk(Bag)

100

Block Type EMIFILr

0.5 min.
(L) 5.00.3

0.45 min.

1.70.3

3.60.3
(W) 5.00.3

(T) 2.350.15

No polarity.

(in mm)

Refer to pages from p.205 to p.209 for mounting information.

Microwave Absorber

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

181

DLW Series
Universal Type [Power Lines/Signal Lines] Chip Common Mode Choke Coil
DLW5AT/DLW5BT Series (105degreeC available type)

DLW5AT/DLW5BT

c Rated Value (p: packaging code)

Chip Ferrite Bead

Chip EMIFILr

Insulation
Resistance
(min.)

Common Mode Impedance Rated Rated

(at 100MHz/20C)
Current Voltage

Part Number

Withstand
DC Resistance
Voltage

DLW5ATN500MQ2p

50ohm (Typ.)

6000mA 50Vdc

10M ohm

125Vdc

0.013ohm max.

DLW5ATN151MQ2p

150ohm (Typ.)

5000mA 50Vdc

10M ohm

125Vdc

0.020ohm max.

DLW5ATN331MQ2p

330ohm (Typ.)

4000mA 50Vdc

10M ohm

125Vdc

0.027ohm max.

DLW5ATN501MQ2p

500ohm (Typ.)

2500mA 50Vdc

10M ohm

125Vdc

0.034ohm max.

DLW5ATN112MQ2p

1100ohm (Typ.)

2000mA 50Vdc

10M ohm

125Vdc

0.056ohm max.

DLW5ATN111TQ2p

110ohm (Typ.)

5000mA 50Vdc

10M ohm

125Vdc

0.020ohm max.

DLW5ATN231TQ2p

230ohm (Typ.)

4000mA 50Vdc

10M ohm

125Vdc

0.027ohm max.

DLW5ATN401TQ2p

400ohm (Typ.)

2500mA 50Vdc

10M ohm

125Vdc

0.034ohm max.

DLW5ATN501TQ2p

500ohm (Typ.)

2000mA 50Vdc

10M ohm

125Vdc

0.056ohm max.

DLW5BTM101TQ2p

100ohm (Typ.)

6000mA 50Vdc

10M ohm

125Vdc

0.013ohm max.

DLW5BTM251TQ2p

250ohm (Typ.)

5000mA 50Vdc

10M ohm

125Vdc

0.020ohm max.

DLW5BTM501TQ2p

500ohm (Typ.)

4000mA 50Vdc

10M ohm

125Vdc

0.027ohm max.

DLW5BTM102TQ2p

1000ohm (Typ.)

2500mA 50Vdc

10M ohm

125Vdc

0.034ohm max.

DLW5BTM142TQ2p

1400ohm (Typ.)

2000mA 50Vdc

10M ohm

125Vdc

0.056ohm max.

Operating Temperature Range: -40C to +105C

Number of Circuit: 1

c Impedance-Frequency Characteristics
DLW5AT_TQ2 Series
10000

10000
Common mode

Common mode

DLW5ATN112MQ2
DLW5ATN501MQ2
DLW5ATN331MQ2
DLW5ATN151MQ2
DLW5ATN500MQ2

100

DLW5ATN331MQ2
DLW5ATN151MQ2
DLW5ATN500MQ2
DLW5ATN501MQ2
DLW5ATN112MQ2
Differential mode

10

1
1

DLW5ATN501TQ2
DLW5ATN401TQ2
DLW5ATN231TQ2
DLW5ATN111TQ2

1000
Impedance ()

1000
Impedance ()

Chip Common Mode Choke Coil

Universal Type [Power Lines/Signal Lines]

DLW5AT_MQ2 Series

10

100

1000

100

10

DLW5ATN501TQ2
DLW5ATN401TQ2
DLW5ATN231TQ2
DLW5ATN111TQ2
Differential mode

1
1

10

100

10000
Common mode
DLW5BTM142TQ2
DLW5BTM102TQ2
DLW5BTM501TQ2
DLW5BTM251TQ2
DLW5BTM101TQ2

1000
Impedance ()

Block Type EMIFILr

DLW5BT_TQ2 Series

100

10

DLW5BTM142TQ2
DLW5BTM102TQ2
DLW5BTM501TQ2
DLW5BTM251TQ2
DLW5BTM101TQ2 Differential mode

1
10

100

1000

Microwave Absorber

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

182

1000

DLW Series
Universal Type [Power Lines/Signal Lines] Chip Common Mode Choke Coil
DLW5AT/DLW5BT Series (105degreeC available type)

DLW5AT/DLW5BT

In operating temperature exceeding +85C,

derating of current is necessary for
DLW5AT series (105 degree C available
type). Please apply the derating curve
shown in chart according to the operating
temperature.

In operating temperature exceeding +85C,

derating of current is necessary for
DLW5AT series (105 degree C available
type). Please apply the derating curve
shown in chart according to the operating
temperature.

Derating of Rated Current

Derating of Rated Current

7000

8000
DLW5ATN500MQ2

7000

DLW5ATN151MQ2

5000

DLW5ATN331MQ2

4000
3000
2500
2000

DLW5ATN501MQ2
DLW5ATN112MQ2

1000

6000
DLW5ATN111TQ2

5000

DLW5ATN231TQ2

4000
3000
2500
2000

DLW5ATN501TQ2

1000

DLW5ATN401TQ2

Chip EMIFILr

Rated Current (mA)

6000
Rated Current (mA)

Chip Ferrite Bead

c Notice (Rating)

0
0

20

40

60

85
80

105
100

Operating Temperature (C)

20

40

60

85
80

105
100
120

Operating Temperature (C)

Universal Type [Power Lines/Signal Lines]

Chip Common Mode Choke Coil

In operating temperature exceeding +85C,

derating of current is necessary for
DLW5BT series (105 degree C available
type). Please apply the derating curve
shown in chart according to the operating
temperature.
Derating of Rated Current
7000
DLW5BTM101TQ2

Rated Current (mA)

6000

DLW5BTM251TQ2

5000

DLW5BTM501TQ2

4000
3000
2500
2000

DLW5BTM102TQ2
DLW5BTM142TQ2

1000
0
20

40

60

85
80

105
100
120

Block Type EMIFILr

Microwave Absorber

Operating Temperature (C)

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

183

DLM Series

Signal Lines Type Chip Common Mode Choke Coil

DLM11G

DLM11G

Series 0504/1210 (inch/mm)

Audio line common choke also effective to differential mode.

(1)

(2)

(4)

(3)

0.350.15

c Equivalent Circuit
(1)

0.650.1

1.250.15

Chip Ferrite Bead

c Dimensions

0.20.15

(3)

(4)
No polarity.

0.50.1

c Packaging
Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

10000

Bulk(Bag)

1000

: Electrode

1.00.15

(2)

(in mm)

Chip EMIFILr

Refer to pages from p.205 to p.209 for mounting information.

c Rated Value (p: packaging code)

Part Number

Common Mode Impedance

(at 100MHz/20C)

Rated
Current

Rated
Voltage

DLM11GN601SD2p

600ohm 25%

100mA

5Vdc

Operating
Insulation Resistance Withstand
DC Resistance
Temperature Range
(min.)
Voltage
100M ohm

25Vdc

Number of Circuit: 1

c Impedance-Frequency Characteristics
DLM11GN601SD2

Differential mode

1000
Impedance ()

Chip Common Mode Choke Coil

Signal Lines Type

10000

100

Common mode
DLM11GN601SD2

10

1
1

10

100

1000

Microwave Absorber

Block Type EMIFILr

Frequency (MHz)

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

184

0.8ohm max.

-40C to +85C

DLM Series

Signal Lines Type Chip Common Mode Choke Coil

DLM11S

DLM11S

Series 0504/1210 (inch/mm)

0504 size multilayer type chip common mode choke coil.

c Equivalent Circuit

0.30.1

(2)

0.50.1

(1)

Chip Ferrite Bead

c Dimensions

(3)

(4)

(1)
0.550.1

(2)

1.00.1

No polarity.

c Packaging

(3)

(4)

Code

Packaging

Minimum
Quantity

180mm Reel Embossed Tape

4000

Bulk(Bag)

500

0.20.15
: Electrode
1.250.1
(in mm)

Chip EMIFILr

Refer to pages from p.205 to p.209 for mounting information.

c Rated Value (p: packaging code)

Part Number

Common Mode Impedance

(at 100MHz/20C)

Rated
Current

Rated
Voltage

Insulation Resistance
(min.)

Withstand
Voltage

DC Resistance

DLM11SN450HY2p

45ohm 25%

100mA

5Vdc

100M ohm

12.5Vdc

0.7ohm25%

DLM11SN900HY2p

90ohm 25%

100mA

5Vdc

100M ohm

12.5Vdc

1.1ohm25%

Number of Circuit: 1

c Impedance-Frequency Characteristics

c Differential Mode Transmission Characteristics (Typ.)

0

1000
Common mode

Impedance ()

100

Insertion Loss (dB)

DLM11SN900HY2
DLM11SN450HY2

DLM11SN900HY2
DLM11SN450HY2

10

Differential mode

4
DLM11SN450HY2
DLM11SN900HY2
6

Signal Lines Type

Chip Common Mode Choke Coil

Operating Temperature Range: -40C to +85C

10

1
10

100
Frequency (MHz)

1000

10000

10

100
Frequency (MHz)

1000

10000

Microwave Absorber

Block Type EMIFILr

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

185

DLP Series

Signal Lines Type Chip Common Mode Choke Coil

DLP0QS

DLP0QS

Series 025020/0605 (inch/mm)

025020 size, very small chip common mode choke coil, Cut-off frequency 8GHz max. Some of them are ready for Display port or SATA.

Chip Ferrite Bead

0.300.05

c Dimensions

c Equivalent Circuit
(1)

(2)

0.200.10

(3)

(4)
No polarity.
(2)

(4)

(3)

(0.40)

0.650.05

(1)

c Packaging
Code

Packaging

Minimum
Quantity

180mm Reel Paper Tape

15000

Bulk(Bag)

500

0.150.07
0.500.05

: Electrode
(in mm)

Part Number

Common Mode Impedance

(at 100MHz/20C)

Rated
Current

DLP0QSN600HL2p

60ohm 25%

50mA

5Vdc

100M ohm

12.5Vdc

3.8ohm25%
0.7ohm25%

DLP0QSA070HL2p

7ohm 2ohm

100mA

5Vdc

100M ohm

12.5Vdc

DLP0QSA150HL2p

15ohm 5ohm

100mA

5Vdc

100M ohm

12.5Vdc

0.8ohm25%

DLP0QSA350HL2p

35ohm 10ohm

100mA

5Vdc

100M ohm

12.5Vdc

2.2ohm25%

Operating Temperature Range: -40C to +85C

Number of Circuit: 1

HD: for high speed differential signal lines

DLP0QSN Series

DLP0QSA Series

1000

1000

Common mode
Common mode
100

DLP0QSA350HL2
DLP0QSA150HL2
DLP0QSA070HL2

100
DLP0QSN600HL2

DLP0QSN600HL2
10

Block Type EMIFILr

UD: for ultra high speed differential signal lines

c Impedance-Frequency Characteristics

Impedance ()

Chip Common Mode Choke Coil

Signal Lines Type

Rated Insulation Resistance Withstand

DC Resistance
Voltage
(min.)
Voltage

Impedance ()

Chip EMIFILr

Refer to pages from p.205 to p.209 for mounting information.

c Rated Value (p: packaging code)

10

DLP0QSA350HL2
DLP0QSA150HL2
DLP0QSA070HL2

Differential mode

Differential mode

1
1

10

100
Frequency (MHz)

1000

10000

10

100
Frequency (MHz)

1000

10000

c Differential Mode Transmission Characteristics (Typ.)

DLP0QSN Series

DLP0QSA Series

0
DLP0QSN600HL2
2
Insertion Loss (dB)

Insertion Loss (dB)

Microwave Absorber

DLP0QSA070HL2
DLP0QSA150HL2
DLP0QSA350HL2

10

10
1

10

100
Frequency (MHz)

1000

10000

10

100
Frequency (MHz)

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

186

1000

10000

DLP Series

Signal Lines Type Chip Common Mode Choke Coil

DLP0NS

DLP0NS

Series 03025/0806 (inch/mm)

03025 size, very small chip common mode choke coil, Cut-off frequency 8GHz max. Some of them are ready for mipi, Display port or SATA.
c Equivalent Circuit

0.270.1

(2)

0.450.05

(1)

Chip Ferrite Bead

c Dimensions

(3)

(4)

0.50.1

(2)

(3)

(4)

0.850.05

No polarity.
(1)

c Packaging

0.20+0.05
0.10

Code

Packaging

Minimum
Quantity

180mm Reel Embossed Tape

10000

Bulk(Bag)

500

0.650.05
: Electrode
(in mm)

Part Number

Common Mode Impedance

(at 100MHz/20C)

Rated
Current

DLP0NSC280HL2p

28ohm 20%

100mA

5Vdc

100M ohm

12.5Vdc

1.3ohm25%

DLP0NSN350HL2p

35ohm 10ohm

100mA

5Vdc

100M ohm

12.5Vdc

1.2ohm25%

DLP0NSN670HL2p

67ohm 20%

110mA

5Vdc

100M ohm

12.5Vdc

2.4ohm25%

DLP0NSN900HL2p

90ohm 20%

100mA

5Vdc

100M ohm

12.5Vdc

3.0ohm25%

DLP0NSN121HL2p

120ohm 20%

90mA

5Vdc

100M ohm

12.5Vdc

3.8ohm25%

DLP0NSA070HL2p

7ohm 2ohm

100mA

5Vdc

100M ohm

12.5Vdc

0.6ohm25%

DLP0NSA150HL2p

15ohm 5ohm

100mA

5Vdc

100M ohm

12.5Vdc

0.95ohm25%

Operating Temperature Range: -40C to +85C

Rated Insulation Resistance Withstand

Voltage
(min.)
Voltage

Number of Circuit: 1

HD: for high speed differential signal lines

DC Resistance

UD: for ultra high speed differential signal lines

c Impedance-Frequency Characteristics
DLP0NSC/DLP0NSN Series

DLP0NSA Series
1000

10000
Common mode

Common mode
DLP0NSN121HL2
100

1000

DLP0NSA150HL2

DLP0NSN350HL2

100

DLP0NSC280HL2
DLP0NSN121HL2

10
DLP0NSA150HL2
DLP0NSA070HL2

DLP0NSN900HL2

10

DLP0NSA070HL2

Block Type EMIFILr

DLP0NSN670HL2

Impedance ()

Impedance ()

DLP0NSN900HL2

DLP0NSN670HL2
Differential mode

DLP0NSN350HL2
DLP0NSC280HL2

1
1

10

Signal Lines Type

Chip Common Mode Choke Coil

Chip EMIFILr

Refer to pages from p.205 to p.209 for mounting information.

c Rated Value (p: packaging code)

100
Frequency (MHz)

Differential mode
1000

10000

0.1
1

10

100
Frequency (MHz)

1000

10000

Microwave Absorber

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

187

DLP Series
Signal Lines Type Chip Common Mode Choke Coil
DLP0NS Series 03025/0806 (inch/mm)

DLP0NS

c Differential Mode Transmission Characteristics (Typ.)

DLP0NSC/DLP0NSN Series

DLP0NSA Series
0

DLP0NSC280HL2
DLP0NSN350HL2
DLP0NSN670HL2
DLP0NSN900HL2
DLP0NSN121HL2

DLP0NSA070HL2
DLP0NSA150HL2

Insertion Loss (dB)

Insertion Loss (dB)

Chip Ferrite Bead

10

10
10

100
Frequency (MHz)

1000

10000

10

100
Frequency (MHz)

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Signal Lines Type

Chip EMIFILr

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

188

1000

10000

DLP Series

Signal Lines Type Chip Common Mode Choke Coil

DLP11S/DLP11R/DLP11T

DLP11S/DLP11R/DLP11T

Series 0504/1210 (inch/mm)

8GHz cut-off frequency (for HDMI/USB3.0) is available.

c Equivalent Circuit

0.30.1

(2)

(1)

Chip Ferrite Bead

c Dimensions

(3)

(4)
No polarity.

(1)

1.00.1

0.550.1

(2)

Part Number

DLP11S

0.820.1

DLP11R

0.50.1

DLP11T

0.30.05

c Packaging
Code

(3)

(4)

0.25+0.1
0.05
: Electrode
1.250.1

3000 (DLP11S)
180mm Reel
4000 (DLP11RN/RB)
Embossed Tape
5000 (DLP11T)

(in mm)

Minimum
Quantity

Packaging

Bulk(Bag)

500

Part Number

Common Mode Impedance

(at 100MHz/20C)

Rated
Current

Rated Insulation Resistance Withstand

DC Resistance
Voltage
(min.)
Voltage

DLP11SN670SL2p

67ohm 20%

180mA

5Vdc

100M ohm

12.5Vdc

1.3ohm25%

DLP11SN121SL2p

120ohm 20%

140mA

5Vdc

100M ohm

12.5Vdc

2.0ohm25%

DLP11SN161SL2p

160ohm 20%

120mA

5Vdc

100M ohm

12.5Vdc

2.7ohm25%

DLP11SN900HL2p

90ohm 20%

150mA

5Vdc

100M ohm

12.5Vdc

1.5ohm25%

DLP11SN201HL2p

200ohm 20%

110mA

5Vdc

100M ohm

12.5Vdc

3.1ohm25%

DLP11SN241HL2p

240ohm 20%

100mA

5Vdc

100M ohm

12.5Vdc

3.5ohm25%

DLP11SN281HL2p

280ohm 20%

90mA

5Vdc

100M ohm

12.5Vdc

4.2ohm25%

DLP11SN331HL2p

330ohm 20%

80mA

5Vdc

100M ohm

12.5Vdc

4.9ohm25%

DLP11SA350HL2p

35ohm 20%

170mA

5Vdc

100M ohm

12.5Vdc

0.9ohm25%

DLP11SA670HL2p

67ohm 20%

150mA

5Vdc

100M ohm

12.5Vdc

1.2ohm25%

DLP11SA900HL2p

90ohm 20%

150mA

5Vdc

100M ohm

12.5Vdc

1.4ohm25%

Operating Temperature Range: -40C to +85C

Number of Circuit: 1

HD: for high speed differential signal lines

UD: for ultra high speed differential signal lines

c Impedance-Frequency Characteristics
DLP11SN Series

Signal Lines Type

Chip Common Mode Choke Coil

Chip EMIFILr

Refer to pages from p.205 to p.209 for mounting information.

c Rated Value (p: packaging code)

DLP11SA Series
1000

10000

DLP11SN331HL2
DLP11SN281HL2
DLP11SN241HL2
DLP11SN201HL2
DLP11SN161SL2
DLP11SN121SL2
DLP11SN900HL2
DLP11SN670SL2

100

10

1
1

10

Common mode
100

DLP11SN331HL2
DLP11SN281HL2
DLP11SN241HL2
DLP11SN201HL2
DLP11SN161SL2
DLP11SN121SL2
DLP11SN900HL2
DLP11SN670SL2
Differential mode

100
Frequency (MHz)

1000

10000

Impedance ()

Impedance ()

1000

Block Type EMIFILr

Common mode

DLP11SA900HL2
DLP11SA670HL2
DLP11SA350HL2

10
DLP11SA900HL2
DLP11SA670HL2
DLP11SA350HL2
Differential mode
1
1

10

100
Frequency (MHz)

1000

10000

Microwave Absorber

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

189

DLP Series
Signal Lines Type Chip Common Mode Choke Coil
DLP11S/DLP11R/DLP11T Series 0504/1210 (inch/mm)

DLP11S/DLP11R/DLP11T

c Differential Mode Transmission Characteristics (Typ.)

DLP11SN Series

DLP11SA Series
0
DLP11SA900HL2

2
Insertion Loss (dB)

DLP11SN900HL2
Insertion Loss (dB)

Chip Ferrite Bead

10

10

Chip EMIFILr

10

100
Frequency (MHz)

1000

10000

10

100
Frequency (MHz)

1000

10000

c Rated Value (p: packaging code)

Part Number

Common Mode Impedance

(at 100MHz/20C)

Rated
Current

Rated Insulation Resistance Withstand

DC Resistance
Voltage
(min.)
Voltage

DLP11RN450UL2p

45ohm 25%

100mA

5Vdc

100M ohm

12.5Vdc

0.8ohm25%

DLP11RB150UL2p

15ohm 5ohm

100mA

5Vdc

100M ohm

12.5Vdc

0.8ohm25%

DLP11RB400UL2p

40ohm 10ohm

100mA

5Vdc

100M ohm

12.5Vdc

Operating Temperature Range: -40C to +85C

Number of Circuit: 1

HD: for high speed differential signal lines

1.3ohm25%
UD: for ultra high speed differential signal lines

Differential mode to common mode conversion characteristic (Scd21) at 2.5GHz

Impedance Characteristics between signal lines Z0 (TDR at 50ps)
DLP11RB: 90ohm15ohm

c Impedance-Frequency Characteristics
DLP11RN Series

DLP11RB Series

1000

1000

Common mode
Common mode
100

Impedance ()

Impedance ()

Chip Common Mode Choke Coil

Signal Lines Type

DLP11RB: -40dB

DLP11RN450UL2

DLP11RN450UL2

10

DLP11RB150UL2
DLP11RB400UL2

100

10

DLP11RB150UL2
DLP11RB400UL2

Block Type EMIFILr

Differential mode

Differential mode
1
1

10

100
Frequency (MHz)

1000

10000

10

1000

10000

c Differential Mode Transmission Characteristics (Typ.)

DLP11RN Series

DLP11RB Series
0

DLP11RB400UL2
Insertion Loss (dB)

Insertion Loss (dB)

DLP11RN450UL2

Microwave Absorber

100
Frequency (MHz)

10

10
1

10

100
Frequency (MHz)

1000

10000

10

100
Frequency (MHz)

1000

10000

Continued on the following page.

!Note

190

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

DLP Series
Signal Lines Type Chip Common Mode Choke Coil
DLP11S/DLP11R/DLP11T Series 0504/1210 (inch/mm)

DLP11S/DLP11R/DLP11T

c Rated Value (p: packaging code)

Common Mode Impedance
(at 100MHz/20C)

Rated
Current

Rated
Voltage

DLP11TB800UL2p

80ohm 25%

100mA

5Vdc

Operating Temperature Range: -40C to +85C

Number of Circuit: 1

Insulation Resistance Withstand

(min.)
Voltage
100M ohm

12.5Vdc

HD: for high speed differential signal lines

DC Resistance
1.5ohm25%

UD: for ultra high speed differential signal lines

Differential mode to common mode conversion characteristic (Scd21) at 2.5GHz

DLP11TB: -40dB
Impedance Characteristics between signal lines Z0 (TDR at 50ps)
DLP11TB: 90ohm15ohm

c Impedance-Frequency Characteristics

c Differential Mode Transmission Characteristics (Typ.)

DLP11TB Series

DLP11TB Series

1000

Chip Ferrite Bead

Part Number

0
Common mode
DLP11TB800UL2

Impedance ()

DLP11TB800UL2

DLP11TB800UL2

10

Chip EMIFILr

100

Insertion Loss (dB)

8
Differential mode
1

10
10

100
Frequency (MHz)

1000

10000

10

100
Frequency (MHz)

1000

10000

Microwave Absorber

Block Type EMIFILr

Signal Lines Type

Chip Common Mode Choke Coil

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

191

DLP Series

Signal Lines Type Chip Common Mode Choke Coil

DLP31S

DLP31S

Series 1206/3216 (inch/mm)

1206 size film type chip common mode choke coil.

c Dimensions

c Equivalent Circuit

0.70.2

(2)

Chip Ferrite Bead

1.150.15

(1)

1.60.15

(2.1)

(3)

(4)
No polarity.

3.20.15
(1)

(2)

c Packaging
(4)

Code

Packaging

Minimum
Quantity

180mm Reel Embossed Tape

3000

Bulk(Bag)

500

(3)
: Electrode
0.30.2
(in mm)

Chip EMIFILr

Refer to pages from p.205 to p.209 for mounting information.

c Rated Value (p: packaging code)

Part Number

Common Mode Impedance

(at 100MHz/20C)

Rated
Current

Rated
Voltage

DLP31SN121ML2p

120ohm 20%

100mA

16Vdc

100M ohm

40Vdc

2.0ohm max.

DLP31SN221ML2p

220ohm 20%

100mA

16Vdc

100M ohm

40Vdc

2.5ohm max.

DLP31SN551ML2p

550ohm 20%

100mA

16Vdc

100M ohm

40Vdc

3.6ohm max.

Number of Circuit: 1

HD: for high speed differential signal lines

UD: for ultra high speed differential signal lines

c Impedance-Frequency Characteristics
10000

1000
DLP31SN551ML2
Impedance ()

Chip Common Mode Choke Coil

Signal Lines Type

Operating Temperature Range: -40C to +85C

Insulation Resistance Withstand

DC Resistance
(min.)
Voltage

DLP31SN221ML2
DLP31SN121ML2
100
Common mode

10
DLP31SN121ML2
DLP31SN221ML2
DLP31SN551ML2

Differential mode

1
1

10

100

1000

Microwave Absorber

Block Type EMIFILr

Frequency (MHz)

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

192

DLP Series

Signal Lines Type Chip Common Mode Choke Coil

DLP1ND

DLP1ND

Series 05025/1506 (inch/mm)

c Dimensions

c Equivalent Circuit

(2)

(3)

(4)

(5)

(6)

(7)

(8)

0.450.05

(1)

0.1 min.

0.20.1

(2)

(3)

(4)

(5)

(6)
(7)
No polarity.

(8)

0.40.1

0.650.1

0.20.1

(1)

Chip Ferrite Bead

2 circuits in 05025 size, adapt to HDMI line.

c Packaging

1.50.1

Code

Packaging

Minimum
Quantity

180mm Reel Embossed Tape

5000

Bulk(Bag)

500

: Electrode
(in mm)

Chip EMIFILr

Refer to pages from p.205 to p.209 for mounting information.

c Rated Value (p: packaging code)

Part Number

Common Mode Impedance

(at 100MHz/20C)

Rated
Current

Rated
Voltage

DLP1NDN350HL4p

35ohm 20%

100mA

5Vdc

100M ohm

12.5Vdc

1.8ohm25%

DLP1NDN670HL4p

67ohm 20%

80mA

5Vdc

100M ohm

12.5Vdc

2.9ohm25%

DLP1NDN900HL4p

90ohm 20%

60mA

5Vdc

100M ohm

12.5Vdc

3.7ohm25%

Number of Circuit: 2

c Impedance-Frequency Characteristics

HD: for high speed differential signal lines

UD: for ultra high speed differential signal lines

c Differential Mode Transmission Characteristics (Typ.)

0

10000

Common mode
1000

-2
DLP1NDN900HL4

DLP1NDN900HL4
Insertion Loss (dB)

Impedance ()

DC Resistance

DLP1NDN670HL4
DLP1NDN350HL4

100

-4

-6

DLP1NDN350HL4

10

DLP1NDN670HL4

Signal Lines Type

Chip Common Mode Choke Coil

Operating Temperature Range: -40C to +85C

Insulation Resistance Withstand

(min.)
Voltage

-8

DLP1NDN900HL4
Differential mode
-10

1
10

100
Frequency (MHz)

1000

10000

10

100

1000

10000

Frequency (MHz)

Microwave Absorber

Block Type EMIFILr

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

193

DLP Series

Signal Lines Type Chip Common Mode Choke Coil

DLP2AD

DLP2AD

Series 0804/2010 (inch/mm)

2 circuit built-in, 0804 size, HDMI adapted type available, cut-off frequency 6GHz max.
c Dimensions

c Equivalent Circuit
0.50.1

(1)

(2)

(3)

(4)

(5)

(6)
(7)
No polarity.

(8)

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

1.00.1

0.250.15

0.820.1

Chip Ferrite Bead

0.250.1

c Packaging

2.00.1

Code

Packaging

Minimum
Quantity

180mm Reel Embossed Tape

3000

Bulk(Bag)

500

: Electrode
(in mm)

Chip Common Mode Choke Coil

Signal Lines Type

Chip EMIFILr

Refer to pages from p.205 to p.209 for mounting information.

c Rated Value (p: packaging code)

Part Number

Common Mode Impedance

(at 100MHz/20C)

Rated
Current

DLP2ADA350HL4p

35ohm 20%

150mA

5Vdc

100M ohm

12.5Vdc

0.8ohm25%

DLP2ADA670HL4p

67ohm 20%

130mA

5Vdc

100M ohm

12.5Vdc

1.0ohm25%

DLP2ADA900HL4p

90ohm 20%

120mA

5Vdc

100M ohm

12.5Vdc

1.4ohm25%

DLP2ADN670HL4p

67ohm 20%

140mA

5Vdc

100M ohm

12.5Vdc

1.3ohm25%

DLP2ADN900HL4p

90ohm 20%

130mA

5Vdc

100M ohm

12.5Vdc

1.7ohm25%

DLP2ADN121HL4p

120ohm 20%

120mA

5Vdc

100M ohm

12.5Vdc

2.0ohm25%

DLP2ADN161HL4p

160ohm 20%

100mA

5Vdc

100M ohm

12.5Vdc

2.5ohm25%

DLP2ADN201HL4p

200ohm 20%

90mA

5Vdc

100M ohm

12.5Vdc

3.2ohm25%

DLP2ADN241HL4p

240ohm 20%

80mA

5Vdc

100M ohm

12.5Vdc

3.8ohm25%

DLP2ADN281HL4p

280ohm 20%

80mA

5Vdc

100M ohm

12.5Vdc

Operating Temperature Range: -40C to +85C

Rated Insulation Resistance Withstand

DC Resistance
Voltage
(min.)
Voltage

HD: for high speed differential signal lines

Number of Circuit: 2

c Impedance-Frequency Characteristics
DLP2ADA Series

DLP2ADN Series
10000

1000
Common mode

Common mode
DLP2ADN281HL4
DLP2ADN241HL4
DLP2ADN201HL4
DLP2ADN161HL4
DLP2ADN121HL4
DLP2ADN900HL4
DLP2ADN670HL4

DLP2ADA900HL4
1000

100
DLP2ADA350HL4
DLP2ADA900HL4

Impedance ()

Impedance ()

DLP2ADA670HL4

Block Type EMIFILr

4.6ohm25%
UD: for ultra high speed differential signal lines

100

10
10

DLP2ADA670HL4
DLP2ADA350HL4
Differential mode

1
1

10

100
Frequency (MHz)

1000

10000

DLP2ADN670HL4

1
1

10

DLP2ADN281HL4
DLP2ADN241HL4
DLP2ADN201HL4
DLP2ADN161HL4
DLP2ADN121HL4
Differential mode
DLP2ADN900HL4
100
Frequency (MHz)

1000

10000

Microwave Absorber

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

194

DLP Series
Signal Lines Type Chip Common Mode Choke Coil
DLP2AD Series 0804/2010 (inch/mm)

DLP2AD

c Differential Mode Transmission Characteristics (Typ.)

DLP2ADA Series

DLP2ADN Series
0

2
DLP2ADA900HL4

DLP2ADN900HL4
Insertion Loss (dB)

Insertion Loss (dB)

Chip Ferrite Bead

10
10

10
100

1000

10000

10

100
Frequency (MHz)

1000

10000

Microwave Absorber

Block Type EMIFILr

Signal Lines Type

Chip Common Mode Choke Coil

Chip EMIFILr

Frequency (MHz)

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

195

DLP Series

Signal Lines Type Chip Common Mode Choke Coil

DLP31D

DLP31D

Series 1206/3216 (inch/mm)

2 circuit built-in, 1206 size, meet IEEE1394, USB, LVDS.

c Equivalent Circuit
(1)

(2)

(3)

(4)

(5)

(6)
(7)
No polarity.

(8)

0.40.2

(2)

(3)

(4)

c Packaging

1.60.15

(1)

0.80.1
0.30.2

Chip Ferrite Bead

1.150.15

c Dimensions

(5)

(6)

(7)

Code

Packaging

Minimum
Quantity

180mm Reel Embossed Tape

3000

Bulk(Bag)

500

(8)
: Electrode

3.20.15

(in mm)

Part Number

Common Mode Impedance

(at 100MHz/20C)

Rated
Current

Rated
Voltage

DLP31DN900ML4p

90ohm 20%

160mA

10Vdc

100M ohm

25Vdc

1.1ohm max.

DLP31DN131ML4p

130ohm 20%

120mA

10Vdc

100M ohm

25Vdc

1.1ohm max.

DLP31DN201ML4p

200ohm 20%

100mA

10Vdc

100M ohm

25Vdc

2.2ohm max.

DLP31DN321ML4p

320ohm 20%

80mA

10Vdc

100M ohm

25Vdc

3.5ohm max.

DLP31DN441ML4p

440ohm 20%

70mA

10Vdc

100M ohm

25Vdc

4.3ohm max.

Operating Temperature Range: -40C to +85C

Number of Circuit: 2

Insulation Resistance Withstand

DC Resistance
(min.)
Voltage

HD: for high speed differential signal lines

UD: for ultra high speed differential signal lines

c Impedance-Frequency Characteristics
10000
Common mode

DLP31DN441ML4
DLP31DN321ML4
DLP31DN201ML4
DLP31DN131ML4
DLP31DN900ML4

1000
Impedance ()

Chip Common Mode Choke Coil

Signal Lines Type

Chip EMIFILr

Refer to pages from p.205 to p.209 for mounting information.

c Rated Value (p: packaging code)

100
DLP31DN441ML4
DLP31DN321ML4

Block Type EMIFILr

10
DLP31DN900ML4
DLP31DN131ML4
DLP31DN201ML4 Differential mode

1
1

10

100

1000

Microwave Absorber

Frequency (MHz)

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

196

DLW Series

Signal Lines Type Chip Common Mode Choke Coil

DLW21S

DLW21S

Series 0805/2012 (inch/mm)

Wire-wound common choke, HDMI available type prepared.

c Equivalent Circuit

2.00.2

(3)

(4)

1.20.2

No polarity.

(2)
(0.4)

(1)

(2)

(0.17)

1.20.2

(1)

Chip Ferrite Bead

c Dimensions

(0.4)

c Packaging

(4)

(3)

(0.45)

(0.45)

Code

Packaging

Minimum
Quantity

180mm Reel Embossed Tape

2000

Bulk(Bag)

500

: Electrode
(in mm)

Part Number

Common Mode Impedance

(at 100MHz/20C)

Rated
Current

Rated
Voltage

DLW21SN670SQ2p

67ohm 25%

400mA

50Vdc

10M ohm

125Vdc

0.25ohm max.

DLW21SN900SQ2p

90ohm 25%

330mA

50Vdc

10M ohm

125Vdc

0.35ohm max.

DLW21SN121SQ2p

120ohm 25%

370mA

50Vdc

10M ohm

125Vdc

0.30ohm max.

DLW21SN181SQ2p

180ohm 25%

330mA

50Vdc

10M ohm

125Vdc

0.35ohm max.

DLW21SN261SQ2p

260ohm 25%

300mA

50Vdc

10M ohm

125Vdc

0.40ohm max.

DLW21SN371SQ2p

370ohm 25%

280mA

50Vdc

10M ohm

125Vdc

0.45ohm max.

DLW21SN501SK2p

500ohm 25%

250mA

50Vdc

10M ohm

125Vdc

0.5ohm max.

Operating Temperature Range: -40C to +85C

Number of Circuit: 1

Insulation Resistance Withstand

DC Resistance
(min.)
Voltage

HD: for high speed differential signal lines

UD: for ultra high speed differential signal lines

c Impedance-Frequency Characteristics
DLW21SN_SQ2/SK2 Series
10000

DLW21SN501SK2
DLW21SN371SQ2
DLW21SN261SQ2
DLW21SN181SQ2

Common mode

1000

Signal Lines Type

Chip Common Mode Choke Coil

Chip EMIFILr

Refer to pages from p.205 to p.209 for mounting information.

c Rated Value (p: packaging code)

DLW21SN670SQ2

10

Block Type EMIFILr

Impedance ()

DLW21SN121SQ2
DLW21SN900SQ2

100

DLW21SN501SK2
DLW21SN371SQ2
DLW21SN261SQ2
DLW21SN181SQ2
DLW21SN121SQ2
DLW21SN900SQ2
Differential mode
DLW21SN670SQ2

0.1
1

10

100

1000

Frequency (MHz)

c Rated Value (p: packaging code)

Common Mode Impedance
(at 100MHz/20C)

Rated
Current

Rated
Voltage

Insulation Resistance Withstand

DC Resistance
(min.)
Voltage

DLW21SN670HQ2p

67ohm 25%

320mA

20Vdc

10M ohm

50Vdc

0.31ohm max.

DLW21SN900HQ2p

90ohm 25%

280mA

20Vdc

10M ohm

50Vdc

0.41ohm max.

DLW21SN121HQ2p

120ohm 25%

280mA

20Vdc

10M ohm

50Vdc

0.41ohm max.

DLW21SR670HQ2p

67ohm 25%

400mA

20Vdc

10M ohm

50Vdc

0.25ohm max.

Operating Temperature Range: -40C to +85C

Number of Circuit: 1

HD: for high speed differential signal lines

UD: for ultra high speed differential signal lines

DLW21SR670HQ2 is designed to correct line impedance when ESD protection device is also used.

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

197

Microwave Absorber

Part Number

DLW Series
Signal Lines Type Chip Common Mode Choke Coil
DLW21S Series 0805/2012 (inch/mm)

DLW21S

c Impedance-Frequency Characteristics
DLW21SN_HQ2 Series

DLW21SR_HQ2 Series

1000

1000
DLW21SN121HQ2

Common mode

DLW21SN900HQ2
DLW21SN670HQ2

100

100
Impedance ()

DLW21SR670HQ2
Impedance ()

Chip Ferrite Bead

Common mode

10

10

DLW21SN121HQ2

Differential mode

DLW21SR670HQ2

DLW21SN900HQ2
DLW21SN670HQ2
Differential mode
0.1

Chip Common Mode Choke Coil

Signal Lines Type

100
Frequency (MHz)

10

100

1000

Frequency (MHz)

DLW21SN900HQ2
2

10
1

10

100
Frequency (MHz)

1000

10000

c Rated Value (p: packaging code)

Common Mode Impedance
(at 100MHz/20C)

Part Number

Rated
Current

Rated
Voltage

Insulation Resistance Withstand

DC Resistance
(min.)
Voltage

DLW21SN181XQ2p

180ohm 25%

240mA

20Vdc

10M ohm

50Vdc

0.39ohm max.

DLW21SN261XQ2p

260ohm 25%

220mA

20Vdc

10M ohm

50Vdc

0.59ohm max.

DLW21SN491XQ2p

490ohm 25%

190mA

20Vdc

10M ohm

50Vdc

0.77ohm max.

Number of Circuit: 1

HD: for high speed differential signal lines

UD: for ultra high speed differential signal lines

c Impedance-Frequency Characteristics

c Differential Mode Transmission Characteristics (Typ.)

DLW21SN_XQ2 Series

DLW21SN_XQ2 Series

10000

0
Common mode
DLW21SN181XQ2

Impedance ()

DLW21SN491XQ2

1000

Insertion Loss (dB)

Block Type EMIFILr

DLW21SN_HQ2 Series

Operating Temperature Range: -40C to +85C

Microwave Absorber

1000

c Differential Mode Transmission Characteristics (Typ.)

Insertion Loss (dB)

Chip EMIFILr

0.1
10

DLW21SN261XQ2
100

DLW21SN491XQ2

10

DLW21SN261XQ2

Differential mode

1
1

10

100
Frequency (MHz)

1000

3000

10
1

10

100
Frequency (MHz)

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

1000

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

198

10000

DLW Series

Signal Lines Type Chip Common Mode Choke Coil

DLW21H

DLW21H

Series 0805/2012 (inch/mm)

Low profile wire-wound common choke coil, HDMI available type prepared.
c Dimensions

c Equivalent Circuit

(2)

2.00.2

1.20.2

Chip Ferrite Bead

(0.17)

0.90.1

(1)

(3)

(4)
No polarity.

(0.45)

(1)

(2)

c Packaging

(0.4)

(0.4)

(0.45)

(4)

Code

Packaging

Minimum
Quantity

180mm Reel Embossed Tape

3000

Bulk(Bag)

500

: Electrode

(3)
(in mm)

Part Number

Common Mode Impedance

(at 100MHz/20C)

Rated
Current

Rated
Voltage

Insulation
Resistance
(min.)

Withstand
Voltage

DC Resistance

DLW21HN670SQ2p

67ohm 25%

330mA

50Vdc

10M ohm

125Vdc

0.35ohm max.

DLW21HN900SQ2p

90ohm 25%

330mA

50Vdc

10M ohm

125Vdc

0.35ohm max.

DLW21HN121SQ2p

120ohm 25%

280mA

50Vdc

10M ohm

125Vdc

0.45ohm max.

DLW21HN181SQ2p

180ohm 25%

250mA

50Vdc

10M ohm

125Vdc

0.50ohm max.

DLW21HN670HQ2p

67ohm 25%

240mA

20Vdc

10M ohm

50Vdc

0.49ohm max.

DLW21HN900HQ2p

90ohm 25%

220mA

20Vdc

10M ohm

50Vdc

0.59ohm max.

DLW21HN121HQ2p

120ohm 25%

200mA

20Vdc

10M ohm

50Vdc

0.68ohm max.

Operating Temperature Range: -40C to +85C

Number of Circuit: 1

HD: for high speed differential signal lines

UD: for ultra high speed differential signal lines

c Impedance-Frequency Characteristics
10000

10000
DLW21HN181SQ2

Common mode

Common mode

1000

1000

Impedance ()

Impedance ()

DLW21HN121SQ2
DLW21HN900SQ2
100
DLW21HN670SQ2
10

DLW21HN121HQ2
DLW21HN900HQ2

100

Signal Lines Type

Chip Common Mode Choke Coil

Chip EMIFILr

Refer to pages from p.205 to p.209 for mounting information.

c Rated Value (p: packaging code)

DLW21HN670HQ2

10

DLW21HN121SQ2

1
DLW21HN121HQ2
DLW21HN900HQ2
DLW21HN670HQ2

DLW21HN900SQ2
Differential mode

DLW21HN670SQ2

0.1

0.1
1

10

100

Block Type EMIFILr

DLW21HN181SQ2

1000

Frequency (MHz)

10

Differential mode

100

1000

Frequency (MHz)

c Differential Mode Transmission Characteristics (Typ.)

0
DLW21HN670HQ2
DLW21HN900HQ2
DLW21HN121HQ2

Microwave Absorber

Insertion Loss (dB)

10
1

10

100
Frequency (MHz)

1000

10000

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

199

DLW Series

Signal Lines Type Chip Common Mode Choke Coil

DLW31S

DLW31S

Series 1206/3216 (inch/mm)

1206 size wire-wound common mode choke coil.

c Equivalent Circuit

3.20.2

(3)

(4)

1.60.2

No polarity.

(2)

c Packaging

(0.6)

(0.6)

(1)

(2)

1.90.2

(1)

(0.25)

Chip Ferrite Bead

c Dimensions

(4)

(3)

Packaging

Minimum
Quantity

180mm Reel Embossed Tape

2000

Bulk(Bag)

500

: Electrode

(0.6)

(0.6)

Code

(in mm)

Part Number

Common Mode Impedance

(at 100MHz/20C)

Rated
Current

Rated
Voltage

DLW31SN900SQ2p

90ohm 25%

370mA

50Vdc

10M ohm

125Vdc

0.3ohm max.

DLW31SN161SQ2p

160ohm 25%

340mA

50Vdc

10M ohm

125Vdc

0.4ohm max.

DLW31SN261SQ2p

260ohm 25%

310mA

50Vdc

10M ohm

125Vdc

0.5ohm max.

DLW31SN601SQ2p

600ohm 25%

260mA

50Vdc

10M ohm

125Vdc

0.8ohm max.

DLW31SN102SQ2p

1000ohm 25%

230mA

50Vdc

10M ohm

125Vdc

1.0ohm max.

DLW31SN222SQ2p

2200ohm 25%

200mA

50Vdc

10M ohm

125Vdc

1.2ohm max.

Operating Temperature Range: -40C to +85C

Number of Circuit: 1

Insulation Resistance Withstand

DC Resistance
(min.)
Voltage

HD: for high speed differential signal lines

UD: for ultra high speed differential signal lines

c Impedance-Frequency Characteristics
10000
DLW31SN222SQ2
DLW31SN102SQ2
DLW31SN601SQ2
DLW31SN261SQ2
DLW31SN161SQ2
DLW31SN900SQ2
Common mode

Impedance ()

1000

100

10
DLW31SN222SQ2
DLW31SN102SQ2
DLW31SN601SQ2
DLW31SN261SQ2
DLW31SN161SQ2
DLW31SN900SQ2
Differential mode

0.1
1

10

100

1000

Frequency (MHz)

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Signal Lines Type

Chip EMIFILr

Refer to pages from p.205 to p.209 for mounting information.

c Rated Value (p: packaging code)

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

200

DLW Series

Signal Lines Type Chip Common Mode Choke Coil

DLW43S

DLW43S

Series 1812/4532 (inch/mm)

1812 size wire-wound common choke, Automotive Type.

c Equivalent Circuit
(0.30)

2.60.2
(0.8)

4.50.2

(2)

(1)

Chip Ferrite Bead

c Dimensions

DLW43S_XK

(3)

(4)
No polarity.
3.20.2

c Packaging

(2)

(4)

(3)

Code

Packaging

(0.6): 100H
(0.7): 11, 22, 51H
(in mm)

c Dimensions

180mm Reel Embossed Tape

500

330mm Reel Embossed Tape

2500

Bulk(Bag)

100

(2)

(1)

(0.30)
(0.8)

4.50.2

L
K

c Equivalent Circuit

2.70.2

DLW43S_XP

Minimum
Quantity

Chip EMIFILr

(1)

(3)

(4)
No polarity.

(4)

Code

Packaging

(3)
(0.6)
(in mm)

Minimum
Quantity

180mm Reel Embossed Tape

500

330mm Reel Embossed Tape

2500

Bulk(Bag)

100

Refer to pages from p.205 to p.209 for mounting information.

c Rated Value (p: packaging code)

Part Number

Common Mode Inductance

Rated
Current

Rated
Voltage

Insulation
Resistance (min.)

Withstand
Voltage

DC
Resistance

Operating
Temperature Range

DLW43SH110XK2p

11H -30%/+50% (at 0.1MHz)

360mA

50Vdc

10M ohm

125Vdc

0.5ohm max.

-40C to +125C

DLW43SH220XK2p

22H -30%/+50% (at 0.1MHz)

310mA

50Vdc

10M ohm

125Vdc

0.6ohm max.

-40C to +125C

DLW43SH510XK2p

51H -30%/+50% (at 1MHz)

230mA

50Vdc

10M ohm

125Vdc

1.0ohm max.

-40C to +125C

DLW43SH101XK2p

100H -30%/+50% (at 1MHz)

200mA

50Vdc

10M ohm

125Vdc

2.0ohm max.

-40C to +125C

DLW43SH101XP2p

100H -30%/+80% (at 0.1MHz)

170mA

50Vdc

10M ohm

125Vdc

2.0ohm max.

-40C to +125C

Number of Circuit: 1

c Impedance-Frequency Characteristics
DLW43S_XK Series

DLW43S_XP Series

100000

Block Type EMIFILr

c Packaging

(2)

Signal Lines Type

Chip Common Mode Choke Coil

3.20.2
(1)

10000
DLW43SH510XK2

DLW43SH101XK2

Common mode
1000

10000

DLW43SH101XP2

1000
DLW43SH220XK2
DLW43SH110XK2
Differential Mode

100

100

10

Microwave Absorber

Impedance ()

Impedance ()

Common Mode

DLW43SH101XP2

DLW43SH10XK2
10

DLW43SH510XK2

Differential mode

DLW43SH220XK2
DLW43SH110XK2
1

10
Frequency (MHz)

100

0.1
0.1

10

100

Frequency (MHz)

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

201

PLT Series

Power Lines Type Large Current Common Mode Choke Coil for Automotive Available

PLT10H

PLT10H

Series (12.9x6.6mm)

Automotive application available, up to 18A.

c Dimensions

c Equivalent Circuit

(1) (2)

(2)

(1)

Chip Ferrite Bead

102

(4) (3)
6.60.2

2.10.3

9.10.2

2.00.3

No polarity.

c Packaging
Code

Packaging

Minimum
Quantity

2.10.3

9.4 max.
13.4 max.
1.00.2

(3)

(4)

12.90.2

: Electrode

1.00.2

180mm Reel Embossed Tape

125

330mm Reel Embossed Tape

500

Bulk(Bag)

50

(in mm)

3.20.3

Part Number

Common Mode
Impedance
(at 10MHz/20C)

Rated
Current

Rated
Voltage

Insulation
Resistance
(min.)

Withstand
Voltage

DC Resistance

Inductance

PLT10HH450180PNp

45ohm (Typ.)

18A

300Vdc

10M ohm

750Vdc

1.3m ohm0.5m ohm

0.8H min.

PLT10HH101150PNp

100ohm (Typ.)

15A

300Vdc

10M ohm

750Vdc

1.8m ohm0.5m ohm

2.0H min.

PLT10HH401100PNp

400ohm (Typ.)

10A

100Vdc

10M ohm

250Vdc

3.6m ohm0.5m ohm

6H min.

PLT10HH501100PNp

500ohm (Typ.)

10A

100Vdc

10M ohm

250Vdc

3.6m ohm0.5m ohm

9H min.

PLT10HH9016R0PNp

900ohm (Typ.)

6A

100Vdc

10M ohm

250Vdc

8.0m ohm0.5m ohm

14H min.

PLT10HH1026R0PNp

1000ohm (Typ.)

6A

100Vdc

10M ohm

250Vdc

8.0m ohm0.5m ohm

20H min.

Operating Temperature Range (Self-temperature rise is included): -55C to +105C (PLT10HH 501100/1026R0 PN), -55C to +125C (PLT10HH 450180/101150/401100/9016R0 PN)

c Impedance-Frequency Characteristics

c Notice (Rating)
In operating temperature exceeding +65C,
derating of current is necessary for
PLT10H series.
Please apply the derating curve shown in
chart according to the operating
temperature.

10000
PLT10HH1026R0PN
PLT10HH9016R0PN
PLT10HH401100PN
1000
Impedance ()

Chip Common Mode Choke Coil

Power Lines Type

Chip EMIFILr

Refer to pages from p.210 to p.211 for mounting information.

c Rated Value (p: packaging code)

PLT10HH501100PN

Derating of Rated Current

100

PLT10HH450

16
PLT10HH450180PN
10
1

10

100
Frequency (MHz)

1000

Rated Current (A)

Block Type EMIFILr

20
PLT10HH101150PN

PLT10HH401

PLT10HH101

12

PLT10HH901

PLT10HH501

4
PLT10HH102
0
0

20

40

60

80

100

120

Microwave Absorber

Operating Temperature (C)

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

202

140

Number of Circuit: 1

DLp Chip Common Mode Choke Coil

!Caution/Notice
!Caution

wrong direction

Notice
o Storage and Operating Conditions

o Handling

<Operating Environment>
Do not use products in a chemical atmosphere such as
chlorine gas, acid or sulfide gas.
Do not use products in the environment close to the
organic solvent.
<Storage and Handling Requirements>
1. Storage Period
DLM11G series should be used within 6 months, the
other series should be used within 12 months.
Solderability should be checked if this period is
exceeded.
2. Storage Conditions
(1) Storage temperature: -10 to +40C
Relative humidity: 15 to 85%
Avoid sudden changes in temperature and humidity.
(2) Do not store products in a chemical atmosphere
such as chlorine gas, acid or sulfide gas.

1. Resin Coating (Except for DLW Series.)

Using resin for coating/molding products may affect
the products performance.
So please pay careful attention in selecting resin.
Prior to use, please make the reliability evaluation with
the product mounted in your application set.
2. Resin Coating (DLW Series)
The impedance value may change due to high curestress of resin to be used for coating/molding products.
An open circuit issue may occur by mechanical stress
caused by the resin, amount/cured shape of resin, or
operating condition etc. Some resin contains some
impurities or chloride possible to generate chlorine by
hydrolysis under some operating condition may cause
corrosion of wire of coil, leading to open circuit.
So, please pay your careful attention in selecting resin
in case of coating/molding the products with the resin.
Prior to use the coating resin, please make sure no
reliability issue is observed by evaluating products
mounted on your board.
3. Caution for Use (DLW Series)
When you hold products with a tweezer, please hold
by the sides. Sharp materials, such as a pair of
tweezers, should not touch the winding portion to
prevent breaking the wire. Mechanical shock should
not be applied to the products mounted on the board
to prevent breaking the core.
4. Brushing
When you clean the neighborhood of products such
as connector pins, bristles of cleaning brush shall not
be touched to the winding portion of this product to
prevent the breaking of wire.
5. Handling of a Substrate
After mounting products on a substrate, do not apply
any stress to the product caused by bending or
twisting to the substrate when cropping the substrate,
inserting and removing a connector from the substrate
or tightening screw to the substrate. Excessive
mechanical stress may cause cracking in the Product.

o Notice (Soldering and Mounting)

1. Cleaning
Failure and degradation of a product are caused by
the cleaning method. When you clean in conditions
that are not in mounting information, please contact
Murata engineering.
2. Soldering
Reliability decreases with improper soldering methods.
Please solder by the standard soldering conditions
shown in mounting information.
3. Other
Noise suppression levels resulting from Murata's EMI
suppression filters EMIFILr may vary, depending on
the circuits and ICs used, type of noise, mounting
pattern, mounting location, and other operating
conditions. Be sure to check and confirm in advance
the noise suppression effect of each filter, in actual
circuits, etc. before applying the filter in a commercialpurpose equipment design.

Bending

Twisting

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

203

Chip EMIFILr

right direction

Chip Common Mode Choke Coil

Chip Common
Mode Choke Coil
!Caution/Notice

1. Self-heating
Please provide special attention when mounting chip
common mode choke coils DLW5 series in close
proximity to other products that radiate heat.
The heat generated by other products may deteriorate
the insulation resistance and cause excessive heat in
this component.

Block Type EMIFILr

o Soldering and Mounting

Chip Ferrite Bead

2. Mounting Direction
Mount Chip Common Mode Choke Coils in right
direction. Wrong direction, which is 90 degrees rotated
from right direction, causes not only open or short
circuit but also flames or other serious trouble.

Microwave Absorber

o Rating
Do not use products beyond the rated current and rated
voltage as this may create excessive heat and
deteriorate the insulation resistance. Be sure to provide
an appropriate fail-safe function on your product to
prevent a second damage that may be caused by the
abnormal function or the failure our product.

PLp Chip Common Mode Choke Coil

!Caution/Notice
!Caution

Chip Ferrite Bead

o Rating
1. Do not use products beyond the rated current and
rated voltage as this may create excessive heat and
deteriorate the insulation resistance.
2. Be sure to provide an appropriate fail-safe function on
your product to prevent a second damage that may be
caused by the abnormal function or the failure our
product.

2. Mounting Direction
Mount Chip Common Mode Choke Coils in right
direction. Wrong direction, which is 90 degrees
rotated from right direction, causes not only open or
short circuit but also flames or other serious trouble.

1. Self-heating
Please provide special attention when mounting chip
common mode choke coils in close proximity to other
products that radiate heat.
The heat generated by other products may deteriorate
the insulation resistance and cause excessive heat in
this component.

right direction

wrong direction

Notice
o Storage and Operating Conditions

o Notice (Soldering and Mounting)

<Operating Environment>
Do not use products in a chemical atmosphere such as
chlorine gas, acid or sulfide gas.
Do not use products in the environment close to the
organic solvent.
<Storage and Handling Requirements>
1. Storage Period
PLT10H series should be used within 12 months.
Solderability should be checked if this period is
exceeded.
2. Storage Conditions
(1) Storage temperature: -10 to +40C
Relative humidity: 15 to 85%
Avoid sudden changes in temperature and humidity.
(2) Do not store products in a chemical atmosphere
such as chlorine gas, acid or sulfide gas.

1. Cleaning
Failure and degradation of a product are caused by
the cleaning method. When you clean in conditions
that are not in mounting information, please contact
Murata engineering.
2. Soldering
Reliability decreases with improper soldering methods.
Please solder by the standard soldering conditions
shown in mounting information.
3. Other
Noise suppression levels resulting from Murata's EMI
suppression filters EMIFILr may vary, depending on
the circuits and ICs used, type of noise, mounting
pattern, mounting location, and other operating
conditions. Be sure to check and confirm in advance
the noise suppression effect of each filter, in actual
circuits, etc. before applying the filter in a
commercial-purpose equipment design.

Block Type EMIFILr

Chip Common
Mode Choke Coil
!Caution/Notice
Chip Common Mode Choke Coil

Chip EMIFILr

o Soldering and Mounting

o Handling

Microwave Absorber

1. Handling of a Substrate
After mounting products on a substrate, do not apply
any stress to the product caused by bending or
twisting to the substrate when cropping the substrate,
inserting and removing a connector from the substrate
or tightening screw to the substrate.
Excessive mechanical stress may cause cracking in
the Product.
Bending

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

204

Twisting

DL p

Soldering and Mounting

Chip Common Mode Choke Coil

1. Standard Land Pattern Dimensions

Land Pattern
+ Solder Resist
Land Pattern
Solder Resist

Chip Ferrite Bead

oReflow and Flow

DLP31D

2.8

0.8

2.2-2.6

0.7

2.1

0.7

DLP31S

0.8 Pitch

1.0 0.6 1.0

0.4

DLP0NS

DLP11S/DLM11S

0.90

DLP11R/11T

1.95

1.55

0.55

0.85
0.3

(2)

0.55

(1)

0.3

0.55

0.55

DLM11G

DLW21S/21H/31SN/43S

1.75
0.25

d1

1.1
0.3
1.5
0.4

0.9

0.3

0.5
1.5

0.4

a3

0.5

4.7

3.3

1.3

DLW5A/5B (Except for DLW5AT_MQ2)

DLW21S/H

Series

0.8

2.6

0.4

1.2

DLW31SN

1.6

3.7

0.4

1.6

DLW43SH110/220/510

3.0

5.9

1.6

3.4

DLW43SH101

3.2

5.9

1.6

3.4

1:
0.9
2.9
5.5

If the pattern is made with wider than 1.2mm (DLW21) /

1.6mm (DLW31S) it may result in components turning
around, because melting speed is different. In the worst
case, short circuit between lines may occur.
2: If the pattern is made with less than specified dimensions,
in the worst case, short circuit between lines may occur
due to spread of soldering paste or mount placing
accuracy.
3: If the pattern is made with wider than 0.8mm (DLW21) /
1.6mm (DLW31SN), the bending strength will be reduced.
Do not use gild pattern; excess soldering heat may dissolve
metal of a copper wire.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

205

Block Type EMIFILr

DLP2AD

1.4
0.2

Microwave Absorber

DLP1ND

Chip Common Mode Choke Coil

Mounting
ChipSoldering
Commonand
Mode
Choke Coil

0.30

0.80

c2

(2)

(3)

0.85

(1)

(4)

0.50

(3)

0.3

(4)

0.80

0.23

0.20

Chip EMIFILr

oReflow Soldering
DLP0QS

0.71

DLM11S
DLM11G
DLP0QS
DLP0NS
DLP11S
DLP11R
DLP11T
DLP1ND
DLP2AD
DLP31S
DLP31D
DLW21S
DLW21H
DLW31SN
DLW43S
DLW5A
DLW5B

(in mm)

DLp Chip Common Mode Choke Coil

Soldering and Mounting

Land Pattern
+ Solder Resist
Land Pattern
Solder Resist

oReflow Soldering Chip Mounting Side

oFlow Soldering Chip Mounting Side

1.3

4.7

3.3

DLW5AT_MQ2

1.3

Chip Ferrite Bead

DLW5AT_MQ2

6.0

DLW5AT_MQ2

(in mm)

0.9
1.9

Chip EMIFILr

2.9
5.5

o PCB Warping
PCB should be designed so that products are not
subjected to the mechanical stress caused by warping
the board.

6.9

Products should be located in the sideways direction

(Length: a<b) to the mechanical stress.
a
b

Microwave Absorber

Block Type EMIFILr

ChipSoldering
Commonand
Mode
Choke Coil
Mounting
Chip Common Mode Choke Coil

Poor example

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

206

Good example

DLp Chip Common Mode Choke Coil

Soldering and Mounting

When flow soldering the chip common mode choke coils,

apply the adhesive in accordance with the following
conditions.
If too much adhesive is applied, then it may overflow into
the land or termination areas and yield poor solderability.
In contrast, if insufficient adhesive is applied, or if the
adhesive is not sufficiently hardened, then the chip may
become detached during flow soldering process.

When reflow soldering the chip common mode choke

coils, the printing must be conducted in accordance with
the following cream solder printing conditions.
If too much solder is applied, the chip will be prone to
damage by mechanical and thermal stress from the PCB
and may crack.
Standard land dimensions should be used for resist and
copper foil patterns.

Chip Ferrite Bead

2. Solder Paste Printing and Adhesive Application

(in mm)

DLP
DLW
DLM

Solder Paste Printing

Adhesive Application

oGuideline of solder paste thickness:

80-100m: DLP0QS
100-150m: DLW21S/21H/31S, DLP0NS/11S/11R/11T/1ND/2AD/
DLM11S/11G
150m: DLW43S
150-200m: DLP31D/31S, DLW5A/5B
*Solderability is subject to reflow conditions and thermal conductivity.
Please make sure that your product has been evaluated in view of your
specifications with our product being mounted to your product.

DLP31S/DLP31D/
DLW5AT_MQ2
Apply 0.3mg of bonding
agent at each chip.
Chip EMIFILr

Series

DLP31D

DLP0QS/0NS/11S/11R/11T/31S/DLM11S/11G
b

DLP0QS

0.3

0.2

0.23

0.48

DLP0NS

0.3

0.3

0.3

0.5

DLM11S/DLP11S

0.7

0.55

0.3

0.55

DLP11R/T

0.5

0.55

0.3

0.55

DLP31S

1.0

0.6

0.7

2.1

DLM11G

0.5

0.5

0.4

0.7

Coating Position of
Bonding Agent

Chip Common Mode Choke Coil

Mounting
ChipSoldering
Commonand
Mode
Choke Coil

Series

DLP31S

DLW21S/21H/31S

DLW21S/H

Series

0.8

2.6

0.5

1.2

DLW31S

1.6

3.7

0.4

1.6

Coating Position of
Bonding Agent

DLW5AT_MQ2

DLP1ND/2AD/31D
b

0.3

0.3

0.2

0.4

Series
DLP2AD

0.55

0.4

0.25

0.5

DLP31D

1.0

0.8

0.4

0.8

Block Type EMIFILr

DLP1ND

Series
DLW43S

a
b

a
3.0 (110/220/510)
3.2 (101)

Coating Position of
Bonding Agent

5.9 1.6 3.4

Microwave Absorber

DLW43S

1.3

3.3
4.7

DLW5A/5B

0.9
2.9
5.5

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

207

DLp Chip Common Mode Choke Coil

Soldering and Mounting

Chip Ferrite Bead

3. Standard Soldering Conditions

Flux:
o Use Rosin-based flux.
In case of DLW21/31 series, use Rosin-based flux with
converting chlorine content of 0.06 to 0.1wt%.
In case of using RA type solder, products should be
cleaned completely with no residual flux.
o Do not use strong acidic flux (with chlorine content
exceeding 0.20wt%)
o Do not use water-soluble flux.

(1) Soldering Methods

Use flow and reflow soldering methods only.
Use standard soldering conditions when soldering chip
common mode choke coils.
In cases where several different parts are soldered, each
having different soldering conditions, use those
conditions requiring the least heat and minimum time.
Solder: Use Sn-3.0Ag-0.5Cu solder. Use of Sn-Zn based
solder will deteriorate performance of products.
If using DLP/DLM series with Sn-Zn based solder,
please contact Murata in advance.

For additional mounting methods, please contact Murata.

Temperature (C)

oFlow Soldering Profile

(Sn-3.0Ag-0.5Cu Solder)

ChipSoldering
Commonand
Mode
Choke Coil
Mounting
Chip Common Mode Choke Coil

Chip EMIFILr

(2) Soldering Profile

T3
T2
t2
Heating

T1

Standard Profile

Pre-heating
t1

DLW5AT_MQ2
DLP31D/31S

Time (s)

Standard Profile

Pre-heating

Series

Limit Profile

Heating
Temp. (T1)

Time. (t1)

Temp. (T2)

Time. (t2)

150C

60s min.

250C

4 to 6s

Limit Profile
Cycle
of Flow

Heating
Temp. (T3)

Time. (t2)

2653C

5s max.

2 times
max.

Cycle
of Flow

2 times
max.

oReflow Soldering Profile

(Sn-3.0Ag-0.5Cu Solder)
Block Type EMIFILr

Temperature (C)

T4
T2
T1

T3

180
150
Limit Profile
Pre-heating

t1
Standard Profile
t2

90s30s

time (s)

Standard Profile
Series

Temp. (T1)

Microwave Absorber

Limit Profile

Peak
Cycle
Temperature
of Reflow
(T2)
Time. (t1)

Heating

Temp. (T3)

Peak
Cycle
Temperature
of Reflow
(T4)
Time. (t2)

Heating

DLM/DLP
DLW21/31

220C min.

30 to 60s

2453C

2 times
max.

230C min.

60s max.

260C/10s

2 times
max.

DLW43S

220C min.

30 to 60s

2453C

2 times
max.

240C min.

30s max.

260C/10s

2 times
max.

DLW5A/5B

220C min.

30 to 60s

2503C

2 times
max.

230C min.

60s max.

260C/10s

2 times
max.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

208

DLp Chip Common Mode Choke Coil

Do not allow the tip of the soldering iron to directly

contact the chip.
For additional methods of reworking with a soldering iron,
please contact Murata engineering.
Chip Ferrite Bead

(3) Reworking with Solder Iron

The following conditions must be strictly followed when
using a soldering iron.
Pre-heating: 150C 60s min.
Soldering iron power output / Tip diameter:
30W max. / 3mm max.
Temperature of soldering iron tip / Soldering time / Times:
350C max. / 3-4s / 2 times*1
1
* DLP0QS, DLP0NS, DLP11S, DLP11T, DLP1ND,
DLP2AD: 380C max. / 3-4s / 2 times
DLW43S: 350C max. / 3s / 2 times

Soldering and Mounting

4. Cleaning

Chip Common Mode Choke Coil

Mounting
ChipSoldering
Commonand
Mode
Choke Coil

Chip EMIFILr

Before cleaning, please contact Murata engineering.

(a) Alcohol cleaning agent
Isopropyl alcohol (IPA)
(b) Aqueous cleaning agent
Pine Alpha ST-100S
(4) Ensure that flux residue is completely removed.
Component should be thoroughly dried after aqueous
agent has been removed with deionized water.

Microwave Absorber

Block Type EMIFILr

Following conditions should be observed when cleaning

chip EMI filter.
(1) Cleaning Temperature: 60C max. (40C max. for
alcohol type cleaner)
(2) Ultrasonic
Output: 20W/liter max.
Duration: 5 minutes max.
Frequency: 28 to 40kHz
(3) Cleaning agent
The following list of cleaning agents have been tested on
the individual components. Evaluation of final assembly
should be completed prior to production.
Do not clean DLW (Except for DLW21H) series.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

209

PL p

Chip Common Mode Choke Coil

Soldering and Mounting

1. Standard Land Pattern Dimensions

(in mm)

Chip Ferrite Bead

PLT10H

oReflow Soldering

2.0 2.5 2.0

PLT10H

4.0

Chip EMIFILr

Copper Foil Pattern

Copper Foil Pattern + Resist
Resist

8.0

4.0

o PCB Warping
PCB should be designed so that products are not
subjected to the mechanical stress caused by warping
the board.

Products should be located in the sideways direction

(Length: a<b) to the mechanical stress.
a
b

ChipSoldering
Commonand
Mode
Choke Coil
Mounting
Chip Common Mode Choke Coil

Poor example

2. Solder Paste Printing and Adhesive Application

When reflow soldering the chip common mode choke
coils, the printing must be conducted in accordance with
the following cream solder printing conditions.
If too much solder is applied, the chip will be prone to
damage by mechanical and thermal stress from the PCB
and may crack.
Standard land dimensions should be used for resist and
copper foil patterns.
Series

PLT10H

When flow soldering the chip common mode choke coils,

apply the adhesive in accordance with the following
conditions.
If too much adhesive is applied, then it may overflow into
the land or termination areas and yield poor solderability.
In contrast, if insufficient adhesive is applied, or if the
adhesive is not sufficiently hardened, then the chip may
become detached during flow soldering process.
Solder Paste Printing

oGuideline of solder paste thickness:

150-200m: PLT10H
For the solder paste printing pattern, use standard land dimensions.
*Solderability is subject to reflow conditions and thermal conductivity. Please make sure that your
product has been evaluated in view of your specifications with our product being mounted to your
product.

Microwave Absorber

Block Type EMIFILr

Good example

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

210

PLp Chip Common Mode Choke Coil

Soldering and Mounting

(1) Soldering Methods

Use reflow soldering methods only.
Use standard soldering conditions when soldering chip
common mode choke coils.
In cases where several different parts are soldered, each
having different soldering conditions, use those
conditions requiring the least heat and minimum time.

Solder: Use Sn-3.0Ag-0.5Cu solder. Use of Sn-Zn based

solder will deteriorate performance of products.
Flux:
o Use Rosin-based flux.
o Do not use strong acidic flux (with chlorine content
exceeding 0.20wt%)
o Do not use water-soluble flux.

Chip Ferrite Bead

3. Standard Soldering Conditions

For additional mounting methods, please contact Murata.

(2) Soldering Profile
oReflow Soldering Profile
(Sn-3.0Ag-0.5Cu Solder)
Chip EMIFILr

Temperature (C)

T4
T2
T1

T3

180
150
Limit Profile
Pre-heating

t1
Standard Profile
t2
time (s)

Temp. (T1)

PLT10H

Limit Profile

Peak
Cycle
Temperature
of Reflow
(T2)
Time. (t1)

Heating

220C min.

30 to 60s

2503C

(3) Reworking with Solder Iron

The following conditions must be strictly followed when
using a soldering iron.
Pre-heating: 150C 60s min.
Soldering iron power output / Tip diameter:
80W max. / 3mm max.
Temperature of soldering iron tip / Soldering time / Times:
400C max. / 5s / 2 times

2 times
max.

Heating
Temp. (T3)

Time. (t2)

230C min.

60s max.

Peak
Cycle
Temperature
of Reflow
(T4)

260C/10s

2 times
max.

Do not allow the tip of the soldering iron to directly

contact the chip.
For additional methods of reworking with a soldering iron,
please contact Murata engineering.

Chip Common Mode Choke Coil

Mounting
ChipSoldering
Commonand
Mode
Choke Coil

Standard Profile
Series

Block Type EMIFILr

90s30s

4. Cleaning

Microwave Absorber

Do not clean after soldering. If cleaning, please contact us.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

211

DL p

Packaging

Chip Common Mode Choke Coil

Minimum Quantity and Dimensions of 8mm Width Paper / Embossed Tape

<Paper>

1.750.1

<Embossed>
c

DLP0QS

d
3.50.05
8.0

Chip Ferrite Bead

2.00.05
1 4.00.1 4.00.1 1.5 +0.1
-0

Direction of Feed
b
1 DLM11G/DLP0QS: 2.00.05
DLP0NS: 2.00.1

c: Depth of Cavity
(Embossed Tape)

c: Total Thickness of Tape

(Paper Tape)

Dimension of the cavity of embossed tape is measured at the bottom side.

Chip EMIFILr

180mm Reel
d

330mm Reel

Paper Tape Embossed Tape Paper Tape Embossed Tape

Bulk

DLM11G

1.45

1.2

0.8 max.

10000

1000

DLM11S

1.4

1.15

0.65

0.25

4000

500

DLP0QS

0.73

0.6

0.55 max.

15000

500

DLP0NS

0.95

0.75

0.55

0.25

10000

500

DLP11S

1.4

1.2

0.98

0.25

3000

500

DLP11R

1.4

1.15

0.7

0.25

4000

500

DLP11T

1.35

1.1

0.45

0.25

5000

500

DLP1ND

1.7

0.84

0.57

0.25

5000

500

DLP2AD

2.2

1.2

0.98

0.25

3000

500

DLP31D/31S

3.5

1.9

1.3

0.25

3000

500

DLW21S

2.25

1.45

1.4

0.3

2000

500

DLW21H

2.3

1.55

1.1

0.25

3000

500

DLW31S

3.6

2.0

2.1

0.3

2000

500
(in mm)

2.00.05
8.00.1
4.00.1

1.5 +0.1
-0

1.750.1

Minimum Quantity and Dimensions of 12mm Width Embossed Tape

c
1 0.4

12.0

Block Type EMIFILr

Part Number
5.50.05

Chip Common
Mode Choke Coil
Packaging
Chip Common Mode Choke Coil

Minimum Qty. (pcs.)

Dimensions

Part Number

Direction of feed
1 DLW43/DLW5AT: 0.3

c: Depth of Cavity

Dimension of the cavity is measured at the bottom side.

Dimensions

Minimum Qty. (pcs.)

180mm Reel 330mm Reel

Bulk

DLW43SH_XK

4.9

3.6

2.7

500

2500

100

DLW43SH_XP

4.9

3.6

2.9

500

2500

100

DLW5AH

5.4

4.1

4.4

400

1500

100

DLW5AT

5.4

4.1

2.7

700

2500

100

DLW5BS

5.5

5.4

4.7

400

1500

100

DLW5BT

5.5

5.5

2.7

700

2500

100

Microwave Absorber

(in mm)

"Minimum Quantity" means the number of units of each delivery or order. The quantity should be an integral multiple of the "Minimum Quantity."
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

212

PL p

Chip Common Mode Choke Coil

Packaging

Minimum Quantity and Dimensions of 24mm Width Embossed Tape

1.750.1
11.750.1

24.00.2

+0.1
1.50

2.00.1

Chip Ferrite Bead

4.00.1

12.00.1

c
Direction of Feed

Part Number
PLT10H

Dimensions

Minimum Qty. (pcs.)

180mm Reel

330mm Reel

Bulk

13.5

6.8

9.4

0.5

125

500

50

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Packaging
Chip Common
Mode Choke Coil

(in mm)

Chip EMIFILr

Dimension of the cavity is measured at the bottom side.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

213

Chip Ferrite Bead

DL p

Chip Common Mode Choke Coil

Design Kits

Microwave Absorber

Block Type EMIFILr

Chip Common
Mode
Design
KitsChoke Coil
Chip Common Mode Choke Coil

Chip EMIFILr

oEKEMDL21AQ-KIT (Chip Common Mode Choke Coils)

No.

Part Number

Quantity
(pcs.)

Common Mode Impedance

(at 100MHz, 20 degrees C)

Rated Voltage
(Vdc)

Rated Current
(mA)

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38

DLW21HN670SQ2
DLW21HN900SQ2
DLW21HN121SQ2
DLW21HN181SQ2
DLW21HN670HQ2
DLW21HN900HQ2
DLW21HN121HQ2
DLW21SN501SK2
DLW21SN670SQ2
DLW21SN900SQ2
DLW21SN121SQ2
DLW21SN181SQ2
DLW21SN261SQ2
DLW21SN371SQ2
DLW21SN670HQ2
DLW21SN900HQ2
DLW21SN121HQ2
DLW21SR670HQ2
DLW21SN181XQ2
DLW21SN261XQ2
DLW21SN491XQ2
DLP0NSC280HL2
DLP0NSN350HL2
DLP0NSN670HL2
DLP0NSN900HL2
DLP0NSN121HL2
DLP0NSA070HL2
DLP0NSA150HL2
DLP0QSN600HL2
DLP0QSA070HL2
DLP0QSA150HL2
DLP0QSA350HL2
DLP1NDN350HL4
DLP1NDN670HL4
DLP1NDN900HL4
DLP11SA350HL2
DLP11SA670HL2
DLP11SA900HL2

10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10

6725%
9025%
12025%
18025%
6725%
9025%
12025%
50025%
6725%
9025%
12025%
18025%
26025%
37025%
6725%
9025%
12025%
6725%
18025%
26025%
49025%
2820%
3510
6720%
9020%
12020%
72
155
6025%
72
155
3510
3520%
6720%
9020%
3520%
6720%
9020%

39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55

DLP11SN670SL2
DLP11SN121SL2
DLP11SN161SL2
DLP11SN900HL2
DLP11SN201HL2
DLP11SN241HL2
DLP11SN281HL2
DLP11SN331HL2
DLP11RB150UL2
DLP11RB400UL2
DLP11RN450UL2
DLP11TB800UL2
DLP2ADA350HL4
DLP2ADA670HL4
DLP2ADA900HL4
DLP2ADN670HL4
DLP2ADN900HL4

10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10

6720%
12020%
16020%
9020%
20020%
24020%
28020%
33020%
155
4010
4525%
8025%

50
50
50
50
20
20
20
50
50
50
50
50
50
50
20
20
20
20
20
20
20
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5

330
330
280
250
240
220
200
250
400
330
370
330
300
280
320
280
280
400
240
220
190
100
100
110
100
90
100
100
50
100
100
100
100
80
60
170
150
150
180
140
120
150
110
100
90
80
100
100
100
100

3520%
6720%
9020%
6720%
9020%

5
5
5
5
5

150
130
120
140
130
Continued on the following page.

!Note

214

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

DLp Chip Common Mode Choke Coil Design Kits

56
57
58
59
60
61
62

Part Number
DLP2ADN121HL4
DLP2ADN161HL4
DLP2ADN201HL4
DLP2ADN241HL4
DLP2ADN281HL4
DLM11SN450HY2
DLM11SN900HY2

Quantity
(pcs.)

Common Mode Impedance

(at 100MHz, 20 degrees C)

Rated Voltage
(Vdc)

Rated Current
(mA)

10
10
10
10
10
10
10

12020%
16020%
20020%
24020%
28020%
4525%
9025%

5
5
5
5
5
5
5

120
100
90
80
80
100
100

No.

Part Number

Quantity
(pcs.)

Common Mode Impedance

(at 100MHz, 20 degrees C)

Rated Voltage
(Vdc)

Rated Current
(mA)

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19

DLW5AHN402SQ2
DLW5ATN111SQ2
DLW5ATN401SQ2
DLW5ATN501SQ2
DLW5ATN851SQ2
DLW5ATN272SQ2
DLW5BSM501TQ2
DLW5BSM601TQ2
DLW5BSM801TQ2
DLW5BSM191SQ2
DLW5BSM351SQ2
DLW5BSM102SQ2
DLW5BSM152SQ2
DLW5BSM302SQ2
DLW5BTM101SQ2
DLW5BTM251SQ2
DLW5BTM501SQ2
DLW5BTM102SQ2
DLW5BTM142SQ2

5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5

4000 (Typ.)
110 (Typ.)
400 (Typ.)
500 (Typ.)
850 (Typ.)
2700 (Typ.)
500 (Typ.)
600 (Typ.)
800 (Typ.)
190 (Typ.)
350 (Typ.)
1000 (Typ.)
1500 (Typ.)
3000 (Typ.)
100 (Typ.)
250 (Typ.)
500 (Typ.)
1000 (Typ.)
1400 (Typ.)

50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50

200
5000
2000
1500
1500
1000
1000
1400
2000
5000
2000
1500
1000
500
6000
5000
4000
2000
1500

Chip EMIFILr

oEKEMDCC5AF-KIT (Chip Common Mode Choke Coils for DC Power Lines / SMD Block Type EMIFILr for Power Lines)

oEKEMDL5AAC-KIT (Chip Common Mode Choke Coils for DC Power Lines / SMD Block Type EMIFILr for Power Lines / 105 degree C available Type)

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17

DLW5ATN500MQ2
DLW5ATN151MQ2
DLW5ATN331MQ2
DLW5ATN501MQ2
DLW5ATN112MQ2
DLW5ATN111TQ2
DLW5ATN231TQ2
DLW5ATN401TQ2
DLW5ATN501TQ2
DLW5BTM101TQ2
DLW5BTM251TQ2
DLW5BTM501TQ2
DLW5BTM102TQ2
DLW5BTM142TQ2
DLW5BSM501TQ2
DLW5BSM601TQ2
DLW5BSM801TQ2

Quantity
(pcs.)
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5

Common Mode Impedance

(at 100MHz, 20 degrees C)
50 (Typ.)
150 (Typ.)
330 (Typ.)
500 (Typ.)
1100 (Typ.)
110 (Typ.)
230 (Typ.)
400 (Typ.)
500 (Typ.)
100 (Typ.)
250 (Typ.)
500 (Typ.)
1000 (Typ.)
1400 (Typ.)
500 (Typ.)
600 (Typ.)
800 (Typ.)

Rated Voltage
(Vdc)
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50

Rated Current
(mA)
6000
5000
4000
2500
2000
5000
4000
2500
2000
6000
5000
4000
2500
2000
1000
1400
2000

Block Type EMIFILr

Part Number

Microwave Absorber

No.

Chip Common Mode Choke Coil

Design
KitsChoke Coil
Chip Common
Mode

No.

Chip Ferrite Bead

Continued from the preceding page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

215

Chip Ferrite Bead

PL p

Large Current Common Mode Choke Coils (Automotive Available)

Design Kits

No.

Part Number

Quantity
(pcs.)

Common Mode Impedance

(at 10MHz, 20 degrees C)

Rated Voltage
(Vdc)

Rated Current
(A)

1
2
3
4
5
6

PLT10HH450180PN
PLT10HH101150PN
PLT10HH401100PN
PLT10HH501100PN
PLT10HH9016R0PN
PLT10HH1026R0PN

2
2
2
2
2
2

45 (Typ.)
100 (Typ.)
400 (Typ.)
500 (Typ.)
900 (Typ.)
1000 (Typ.)

300
300
100
100
100
100

18
15
10
10
6
6

No.

Part Number

Quantity
(pcs.)

Insertion Loss

Rated Voltage
(Vdc)

Rated Current
(A)

7
8
9
10
11
12
13
14
15

BNX002-01
BNX003-01
BNX005-01
BNX012-01
BNX016-01
BNX022-01
BNX023-01
BNX024H01
BNX025H01

1
1
1
1
1
2
2
2
2

1MHz to 1GHz : 40dB min.

5MHz to 1GHz : 40dB min.
1MHz to 1GHz : 40dB min.
1MHz to 1GHz : 40dB min.
100kHz to 1GHz : 40dB min.
1MHz to 1GHz : 35dB min.
1MHz to 1GHz : 35dB min.
100kHz to 1GHz : 35dB min.
50kHz to 1GHz : 35dB min.

50
150
50
50
25
50
100
50
25

10
10
15
15
15
10
15
15
15

Microwave Absorber

Block Type EMIFILr

Chip Common
Mode
Design
KitsChoke Coil
Chip Common Mode Choke Coil

Chip EMIFILr

oEKEPBLCKAD-KIT

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

216

Chip Ferrite Bead

BNX
218

Function Example

218

Product Detail

221

!Caution/Notice

225

Soldering and Mounting

227

Packaging

231

Design Kits

232

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Series Line Up

Chip EMIFILr

Block Type EMIFILr

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

BNX
Type

p221

Chip Ferrite Bead

SMD Type
for Power Lines
p223

Lead Type
for Power Lines
p224
Lead Type
Low Profile for Power Lines

Chip EMIFILr

Series Line Up / Function Example

Block Type EMIFILr

Part Number

Thickness
(mm)

Rated Voltage

Effective Frequency Range

Rated Current

BNX022-01
BNX023-01
BNX024H01
BNX025H01
BNX002-01
BNX003-01
BNX005-01
BNX012-01
BNX016-01

3.1
3.1
3.5
3.5
18.0
18.0
18.5
8.0
8.0

50Vdc
100Vdc
50Vdc
25Vdc
50Vdc
150Vdc
50Vdc
50Vdc
25Vdc

1MHz to 1GHz:35dB min.

1MHz to 1GHz:35dB min.
100kHz to 1GHz:35dB min.
50kHz to 1GHz:35dB min.
1MHz to 1GHz:40dB min.
5MHz to 1GHz:40dB min.
1MHz to 1GHz:40dB min.
1MHz to 1GHz:40dB min.
100kHz to 1GHz:40dB min.

10A
15A
15A
15A
10A
10A
15A
15A
15A

Suppression of Radiation Noise from Power Line Cable

Antenna

Test Board
DC-DC Converter
Chip Common Mode Choke Coil

BNX012
AC
Adaptor

OUT
5V

IN
12V
Power
Circuit
(SW)

12Vdc

Clock Drive
(30MHz)

100F

Cable
AC100V

Power Block

Digital Block

cTest Result
With BNX012-01
70

60

60
Level (dBuV/m)

Level (dBuV/m)

Block Type EMIFILr

Without Filter
70

50
40
30
20

50
40
30
20

10

10
0

200

400

600

1000

200

400

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

218

600

Frequency (MHz)

Microwave Absorber

Frequency (MHz)

800

800

1000

BNX Function Example

Impulse Noise Countermeasure

CB
60dB
(40dB+20dB)
ATT
PSG

Chip Ferrite Bead

+B
Impulse Noise
Generator:
INS-4420
(4kV, 50nsec)

Oscilloscope:
TDS7254

CG

BNX

Chip EMIFILr

cWithout Filter

Applied Impulse Voltage: 4kV/50nS

Y-AXIS: 1kV/div

4kV

Chip Common Mode Choke Coil

cWith Filter

BNX012-01

ESD Countermeasure

BNX022-01

Block Type EMIFILr

BNX002-01

ESD Waveform Comparison

5000

3000
Initial
2000

Microwave Absorber

Wave Voltage (V)

4000

1000
with BNX022-01
0

-1000
-10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200
Time (nsec)

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

219

EMI
Suppression
Effect

BNX Series

Suppression of Ripple Noise of DC Side in the Switching Power Supply

Test Circuit
Chip Ferrite Bead

BNX002-01
+5V
Switching Power Supply
CG

Type of Filter

EMI Suppression Effect / Description

There is high frequency noise

of 0.5V maximum.

Chip EMIFILr

Without Filter

+5.0V
50s/div
0.2V/div

Chip Common Mode Choke Coil

BNX002-01 can suppress most of the noise.

When BNX002-01
is used

+5.0V
50s/div
0.2V/div

Example of Impulse Noise Suppression

Block Type EMIFILr

Type of Filter

EMI Suppression Effect

Impulse Noise
2000V/50ns

Without Filter

Microwave Absorber

Y-axis: 500V/div
X-axis: 10ns/sec

When BNX002
is used
Y-axis: 500V/div
X-axis: 10ns/sec

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

220

BNX Series

Power Lines Type Block Type EMIFILr

BNX02p

BNX02p

Series

SMD package of block type EMIFILr.

c Equivalent Circuit
L1

(1)
*
Part Number Appearance
(4) BNX022-01 BNX022
BNX023-01 BNX023

BNX02p*

1.60.3

(4)

1.30.2

(4)
7.00.2 1.550.2

4.20.3

(3)

(1)-(4): Terminal Number

PSG: Power Supply Ground
CG: Circuit Ground
CB: Circuit+B

(2)

c Packaging
Code

Packaging

: Electrode
2.50.2 1.550.2

180mm Reel Embossed Tape

400

330mm Reel Embossed Tape

1500

Bulk(Bag)

100

(in mm)

(4)

c Equivalent Circuit
L1

(1)
9.10.2

*
Part Number Appearance
(4) BNX024H01 BNX024
BNX025H01 BNX025

BNX02p*

1.60.3

1.050.2

4.20.3

(3)

C2

CB (2)

1.00.3

C1

L2

CG (4)

(3) PSG

(1)-(4): Terminal Number

PSG: Power Supply Ground
CG: Circuit Ground
CB: Circuit+B

(2)

c Packaging
Code

Packaging

(4)
(2)

0.30.1

(1)

(4)

(4)
7.00.2 1.550.2
1.30.2

0.30.1

(3)
(2.45)

(1)

L3

(2)

3.50.2

(3)

Minimum
Quantity

(4)

c Dimensions
12.10.2
(1)

CG (4)

(3) PSG

: Electrode
2.50.2 1.550.2

Minimum
Quantity

180mm Reel Embossed Tape

400

330mm Reel Embossed Tape

1500

Bulk(Bag)

100

(in mm)

(4)

Refer to pages from p.227 to p.228 for mounting information.

c Rated Value (p: packaging code)

Rated Voltage

Withstand Voltage

Insulation Resistance
(min.)

Rated Current

Insertion Loss
(Line impedance=50 ohm)

BNX022-01p

50Vdc

125Vdc

10A

500M ohm

1MHz to 1GHz:35dB min.

BNX023-01p

100Vdc

250Vdc

15A

500M ohm

1MHz to 1GHz:35dB min.

BNX024H01p

50Vdc

125Vdc

15A

100M ohm

100kHz to 1GHz:35dB min.

BNX025H01p

25Vdc

62.5Vdc

15A

50M ohm

50kHz to 1GHz:35dB min.

Power Lines Type

Block Type EMIFILr

Part Number

Operating Temperature Range: -40C to +125C (BNX022/BNX023), -55C to +125C (BNX024H/BNX025H)

c Insertion Loss Characteristics

BNX022/023

BNX024H01

0
BNX022-01
BNX023-01

20

40

60

80

40

Microwave Absorber

Insertion Loss (dB)

Insertion Loss (dB)

20

60

80

100
0.01

0.1

1
10
Frequency (MHz)

Chip EMIFILr

1.00.3

BNX024H/BNX025H

CB (2)

C1

L2

(2)
0.30.1

(1)

C2

Chip Common Mode Choke Coil

0.30.1

(3)
(2.45)

(1)

1.050.2

3.10.2

(3)

L3

(2)

9.10.2

(1)

Chip Ferrite Bead

c Dimensions
12.10.2

BNX022/BNX023

100

1000

100
0.01

0.1

1
10
Frequency (MHz)

100

1000

Continued on the following page.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

221

BNX Series
Power Lines Type Block Type EMIFILr
BNX02pSeries

BNX02p

c Insertion Loss Characteristics

BNX025H01

20
BNX025H01
BNX026H01

Insertion Loss (dB)

Chip Ferrite Bead

40

60

80

0.1

1
10
Frequency (MHz)

100

1000

c Notice (Rating)
In operating temperature exceeding +85C,
derating of current is necessary for
BNX022 series. Please apply the derating
curve shown in chart according to the
operating temperature.

In operating temperature exceeding +85C,

derating of current is necessary for
BNX023 series. Please apply the derating
curve shown in chart according to the
operating temperature.

Derating of Rated Current

Derating of Rated Current

Rated Current (A)

Rated Current (A)

15

10

1
0
-40

85
125
Operating Temperature (C)

1
0
-40

85
125
Operating Temperature (C)

In operating temperature exceeding +85C,

derating of current is necessary for
BNX024H/025H series. Please apply the
derating curve shown in chart according to
the operating temperature.
Derating of Rated Current
15

Microwave Absorber

Rated Current (A)

Block Type EMIFILr

Power Lines Type

Chip Common Mode Choke Coil

Chip EMIFILr

100
0.01

1
0
-40

85
125
Operating Temperature (C)

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

222

BNX Series

Power Lines Type Block Type EMIFILr

BNX00p

BNX00p

Series

Large insertion loss from several hundred kHz to several GHz.

12.00.5

c Equivalent Circuit
L1

11.00.5

0.8
0.1

18 max.

0.8

CG

0.8
0.6
0.1

c Packaging

PSG: Power supply ground

CG: Load circuit ground
CB: Load circuit + Bias

Code

Packaging

Minimum Quantity

Box

100

(in mm)

c Dimensions

BNX005

2.50.2

12.00.5

c Equivalent Circuit
L1

11.00.5

13.5 max.
18.5 max.
0.8
0.1

5.00.5

3.51.0

(1)

1.0

CG

PSG

CG (4)

(3) PSG

1.0

CB (2)

C1

(1)-(4): Terminal Number

PSG: Power Supply Ground
CG: Circuit Ground
CB: Circuit+B

1.0
0.6
0.1
2.50.2

2.50.2

CB

CG

C2
L2

2.50.2
7.50.2

L3

c Packaging

PSG: Power supply ground

CG: Load circuit ground
CB: Load circuit + Bias

Code

Packaging

Minimum Quantity

Box

100

(in mm)

Refer to pages from p.229 to p.230 for mounting information.

Rated Voltage

Withstand Voltage

Rated Current

Insulation Resistance
(min.)

Insertion Loss
(Line impedance=50 ohm)

BNX002-01

50Vdc

125Vdc

10A

100M ohm

1MHz to 1GHz:40dB min.

BNX003-01

150Vdc

375Vdc

10A

100M ohm

5MHz to 1GHz:40dB min.

BNX005-01

50Vdc

125Vdc

15A

100M ohm

1MHz to 1GHz:40dB min.

Power Lines Type

Block Type EMIFILr

c Rated Value
Part Number

Operating Temperature Range: -30C to +85C

c Insertion Loss Characteristics

(50 - 50)

0
BNX003-01
20

BNX002-01
(BNX005-01)

40

60

Microwave Absorber

Insertion Loss (dB)

Chip EMIFILr

PSG

CG (4)
(1)-(4): Terminal Number
PSG: Power Supply Ground
CG: Circuit Ground
CB: Circuit+B

2.50.2

CB

CG

CB (2)

C1

(3) PSG

2.50.2
7.50.2

C2

Chip Common Mode Choke Coil

0.8

L3

B
L2

5.00.5

3.51.0

13 max.

(1)

Chip Ferrite Bead

c Dimensions

BNX002/BNX003

80

100
0.001

0.01

0.1

1
Frequency (MHz)

10

100

1000

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

223

BNX Series

Power Lines Type Block Type EMIFILr

BNX01p

BNX01p

Series

Low profile version of BNX series.

c Dimensions

c Equivalent Circuit
L1

11.00.2

12.00.2

8.00.5

0.8
0.1

0.8
0.1
7.50.2

12.00.5

3.20.5

BNX***

4.00.5

Chip Ferrite Bead

(1)

L3

C2

B
L2

CG (4)

(3) PSG
0.8
0.1

2.50.2

CB (2)

C1

(1)-(4): Terminal Number

PSG: Power Supply Ground
CG: Circuit Ground
CB: Circuit+B

0.8
0.1
0.6
0.1
2.50.2

*** : 012/016

PSG: Power supply ground

CG: Load circuit ground
CB: Load circuit + Bias

CB

CG

CG

PSG

c Packaging
Code

Packaging

Minimum Quantity

Box

150

(in mm)

Chip EMIFILr

Refer to pages from p.229 to p.230 for mounting information.

c Rated Value
Part Number

Rated Voltage

Withstand Voltage

Rated Current

Insulation Resistance
(min.)

Insertion Loss
(Line impedance=50 ohm)

BNX012-01

50Vdc

125Vdc

15A

500M ohm

1MHz to 1GHz:40dB min.

BNX016-01

25Vdc

62.5Vdc

15A

50M ohm

100kHz to 1GHz:40dB min.

c Insertion Loss Characteristics

c Notice (Rating)
(50 - 50)

20

40

In operating temperature exceeding +85C,

derating of current is necessary for
BNX01p series. Please apply the derating
curve shown in chart according to the
operating temperature.

BNX012-01
60

Derating of Rated Current

BNX016-01

80

Block Type EMIFILr

Power Lines Type

100
0.001

0.01

0.1

1
Frequency (MHz)

10

100

1000

Rated Current (A)

Insertion Loss (dB)

Chip Common Mode Choke Coil

Operating Temperature Range: -40C to +125C

15

10

5
1
0
-40

85 102.5 120 125

Operating Temperature (C)

o Connecting power line

In case of using power line, please
connect to each terminal as shown.
Power Supply
(BNX Input)
Power Supply +Bias

Microwave Absorber

Power Supply Ground

Power Supply -Bias
Power Supply Ground

BNX

Circuit
(BNX Output)

B
PSG

CB
CG

Load Circuit +Bias

B
PSG

CB
CG

Load Circuit -Bias

Load Circuit Ground

Load Circuit Ground

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

224

Block Type EMIFILr SMD Type !Caution/Notice

!Caution
o Rating
Chip Ferrite Bead

Do not use products beyond the rated current and rated

voltage as this may create excessive heat and
deteriorate the insulation resistance.

o Storage and Operating Conditions

o Handling

<Operating Environment>
Do not use products in a chemical atmosphere such as
chlorine gas, acid or sulfide gas.
Do not use products in the environment close to the
organic solvent.
<Storage and Handling Requirements>
1. Storage Period
BNX series should be used within 12 months.
Solderability should be checked if this period is
exceeded.
2. Storage Conditions
(1) Storage temperature: -10 to +40C
Relative humidity: 15 to 85%
Avoid sudden changes in temperature and humidity.
(2) Do not store products in a chemical atmosphere
such as chlorine gas, acid or sulfide gas.

1. Resin Coating
Using resin for coating/molding products may affect
the products performance.
So please pay careful attention in selecting resin.
Prior to use, please make the reliability evaluation with
the product mounted in your application set.
2. Handling of a Substrate (for BNX02p)
After mounting products on a substrate, do not apply
any stress to the product caused by bending or
twisting to the substrate when cropping the substrate,
inserting and removing a connector from the substrate
or tightening screw to the substrate.
Excessive mechanical stress may cause cracking in
the Product.
Twisting

Chip Common Mode Choke Coil

Bending

Chip EMIFILr

Notice

o Notice (Soldering and Mounting)

Microwave Absorber

Block Type EMIFILr

Block
Type EMIFILr
!Caution/Notice

1. Cleaning
Do not clean BNX series (SMD Type).
Before cleaning, please contact Murata engineering.
2. Soldering
Reliability decreases with improper soldering methods.
Please solder by the standard soldering conditions
shown in mounting information.
3. Other
Noise suppression levels resulting from Murata's EMI
suppression filters EMIFILr may vary, depending on
the circuits and ICs used, type of noise, mounting
pattern, mounting location, and other operating
conditions. Be sure to check and confirm in advance
the noise suppression effect of each filter, in actual
circuits, etc. before applying the filter in a
commercial-purpose equipment design.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

225

Block Type EMIFILr Lead Type

!Caution/Notice
!Caution

Notice
o Storage and Operating Conditions
<Operating Environment>
1. Do not use products in a chemical atmosphere such
as chlorine gas, acid or sulfide gas.
2. Do not use products near water, oil or organic
solvents.
<Storage and Handling Requirements>
1. Storage Period
BNX Series should be used within 12 months.
Solderability should be checked if this period is
exceeded.
2. Storage Conditions
(1) Storage temperature: -10 to +40C
Relative humidity: 15 to 85%
Avoid sudden changes in temperature and humidity.
(2) Do not store products in a chemical atmosphere
such as chlorine gas, acid or sulfide gas.

Block
Type EMIFILr
!Caution/Notice
Block Type EMIFILr

Chip Common Mode Choke Coil

Chip EMIFILr

Chip Ferrite Bead

o Rating
Do not use products beyond the rated current and rated
voltage as this may create excessive heat and
deteriorate the insulation resistance.

o Notice (Soldering and Mounting)

1. Cleaning
Failure and degradation of a product are caused
by the cleaning method. When you clean in conditions
that are not in mounting information, please contact
Murata engineering.
2. Soldering
Reliability decreases with improper soldering
methods. Please solder by the standard soldering
conditions shown in mounting information.
3. Other
Noise suppression levels resulting from Murata's
EMI suppression filters "EMIFIL" may vary,
depending on the circuits and ICs used, type of
noise, mounting pattern, lead wire length, mounting
location, and other operating conditions. Be sure
to check and confirm in advance the noise
suppression effect of each filter, in actual
circuits, etc. before applying the filter in a
commercial-purpose equipment design.

Microwave Absorber

o Notice (Appearance)
Although some part of the product surface seems to be
white in some cases, do not care because it is the result
of waxing process for humidity resistance improvement.
This wax does not make bad affection to mechanical or
electrical performance, reliability of the product.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

226

BNX

SMD Type

Block Type EMIFILr

Soldering and Mounting

1. Standard Land Pattern Dimensions

CG

2.8
2.3

CB

PSG

CG
CG

17.5

13.2
13.7

10.3

5.8

3.8

o PCB Warping (for BNX02p)

PCB should be designed so that products are not
subjected to the mechanical stress caused by warping
the board.

Chip EMIFILr

12.5
10.2
9.9
9.6
7.1
6.2
5.3

(1) A double-sided print board (or multilayer board) as shown in

the left figure is designed, and please apply a soldering Cu
electrode with a product electrode to a "Land Pattern", apply
resist to a "Land Pattern + Solder Resist" at Cu electrode.
(2) This product is designed to meet large current. Please
design PCB pattern which is connected to this product not to
become too hot by applied large current.
(3) Please drop CG on a ground electrode on the back layer
(the same also in a multilayer case) by the through hole. And
a surface to ground electrode layer may also take a large
area as much as possible.
(4) It is recommended to use a double-sided printed circuit
board with BNX mounting on one side and the ground
pattern on the other in order to maximize filtering
performance, multiple feed through holes are required to
maximize the BNX's connection to ground.
(5) The ground pattern should be designed to be as large as
possible to achieve maximum filtering performance.

Products should be located in the sideways direction

(Length: a<b) to the mechanical stress.

Chip Common Mode Choke Coil

BNX022
BNX023
BNX024
BNX025

(in mm)

a
b

Poor example

Good example

2. Solder Paste Printing and Adhesive Application

damage by mechanical and thermal stress from the PCB
and may crack.
Standard land dimensions should be used for resist and
copper foil patterns.

When reflow soldering the block type EMIFILr, the

printing must be conducted in accordance with the
following cream solder printing conditions.
If too much solder is applied, the chip will be prone to
Series

Adhesive Application

oGuideline of solder paste thickness:

150-200m
12.5

CB

PSG

CG
CG
5.8

3.8

17.5

2.8
2.3

13.7

7.1
5.3

Microwave Absorber

CG

10.2
9.6

10.3

BNX022
BNX023
BNX024
BNX025

Solder Paste Printing

Block Type EMIFILr

Soldering
andEMIFILr
Mounting
Block Type

Land Pattern
Solder Resist
Through Hole

Chip Ferrite Bead

Land Pattern
+ Solder Resist

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

227

BNX Block Type EMIFILr SMD Type

Soldering and Mounting

Chip Ferrite Bead

3. Standard Soldering Conditions

(1) Soldering Methods
Use reflow soldering methods only.
Use standard soldering conditions when soldering block
type EMIFILr SMD type.
In cases where several different parts are soldered, each
having different soldering conditions, use those
conditions requiring the least heat and minimum time.

Flux:
o Use Rosin-based flux.
In case of using RA type solder, products should be
cleaned completely with no residual flux.
o Do not use strong acidic flux (with chlorine content
exceeding 0.20wt%)
o Do not use water-soluble flux.

Solder: Use Sn-3.0Ag-0.5Cu solder. Use of Sn-Zn based

solder will deteriorate performance of products.

For additional mounting methods, please contact Murata.

(2) Soldering Profile

oReflow Soldering Profile
(Sn-3.0Ag-0.5Cu solder)
Temperature (C)

Chip EMIFILr

T4
T2
T1

T3

180
150
Limit Profile
Pre-heating

t1
Standard Profile
t2

90s30s

Time (s)

BNX022/023/024/025

Limit Profile

Peak
Heating
Cycle
Temperature
of Reflow
(T2)
Time. (t1)
Temp. (T1)

220C min.

30 to 60s

2503C

(3) Reworking with Solder Iron

The following conditions must be strictly followed when
using a soldering iron.
Pre-heating: 150C 60s min.
Soldering iron power output: 100W max.
Temperature of soldering iron tip / Soldering time / Times:
450C max. / 5s max. / 2 time

2 times
max.

Temp. (T3)

Peak
Cycle
Temperature
of Reflow
(T4)
Time. (t2)

230C min.

60s max.

Heating

4. Cleaning
Do not clean BNX022/023/024/025 series. In case of cleaning, please contact Murata engineering.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

228

260C/10s

2 times
max.

Do not allow the tip of the soldering iron to directly

contact the chip.
For additional methods of reworking with a soldering iron,
please contact Murata engineering.

Microwave Absorber

Block Type
Soldering
andEMIFILr
Mounting
Block Type EMIFILr

Chip Common Mode Choke Coil

Standard Profile
Series

BNX

Block Type EMIFILr

Lead Type

Soldering and Mounting

1. Mounting Hole
Mounting holes should be designed as specified below.
BNX00p/01p

Component Side

Terminal Layout (Bottom figure)

(CG)

(CG)

(CG)
2.50.1

Chip Ferrite Bead

(B)

2.50.1 2.50.1

1.2
(PSG)

CB
CG
CG

(CB)

5.00.1
7.50.1

PSG

PSG: Power supply ground

CG: Load circuit ground
CB: Load circuit + Bias

Use a bilateral P.C. board. Insert the BNX into the P.C.board until
the root of the terminal is secured, then solder.

PSG

(2) Bottom View

PSG

PSG

Shield plate
PSG

CG

B
CG

CG CG
CB

CG
CB CG

Block Type EMIFILr

Soldering
andEMIFILr
Mounting
Block Type

Copper foil pattern

Recommended Land Pattern

3.2

3.2
Through holes
1.2

Chip Common Mode Choke Coil

(1) Component Side View

PSG

2.5
CG

CG

Microwave Absorber

(2) Self-heating
Though this product has a large rated current, localized
selfheating may be caused depending on soldering
conditions. To avoid this, attention should be paid to the
following:
(a) Use P.C. board with our recommendation on hole
diameter / land pattern dimensions, mentioned in the
right hand drawing, especially for 4 terminals which
pass current.
(b) Solder the terminals to the P.C. board with
soldercover area at least 90%. Otherwise, excess
self-heating at connection between terminals and P.C.
board may lead to smoke and / or fire of the product
even when operating at rated current.
(c) After installing this product in your product, please
make sure the self-heating is within the rated current
recommended.

P. C. Board Patterns

2.5

(1) How to use effectively

This product effectively prevents undesired radiation and
external noise from going out / entering the circuit by
grounding the high frequency components which cause
noise problems. Therefore, grounding conditions may affect
the performance of the filter and attention should be paid to
the following for effective use.
(a) Design maximized grounding area in the P.C. board,
and grounding pattern for all the grounding terminals
of the product to be connected. (Please follow the
specified recommendations.)
(b) Minimize the distance between ground of the P.C.
board and the ground plate of the product.
(Recommend using the through hole connection
between grounding area both of component side and
bottom side.)
(c) Insert the terminals into the holes on P.C. board
completely.
(d) Don't connect PSG terminal with CG terminal directly.
(See the item 1. Terminal Layout)

Chip EMIFILr

2. Using the Block Type EMIFILr (Lead Type) Effectively

CG

CB

3.2
(in mm)
2.5
5.0

Copper foil pattern

7.5

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

229

BNX Block Type EMIFILr Lead Type

Soldering and Mounting

Chip Ferrite Bead

3. Soldering
(1) Use Sn-3.0Ag-0.5Cu solder.
(2) Use Rosin-based flux. Do not use strong acidic flux with
halide content exceeding 0.2wt% (chlorine conversion
value).
(3) Products and the leads should not be subjected to any
mechanical stress during the soldering process, or while
subjected to the equivalent high temperatures.
(4) Standard flow soldering profile

Pre-heating

Chip EMIFILr

Temperature (C)

300

200
150

150C

100
50
60s min.

Solder

Chip Common Mode Choke Coil

Gradual Cooling
(in air)

Soldering Temperature

250

Sn-3.0Ag-0.5Cu solder

Soldering Time

Soldering Temperature Soldering Time

250 to 260C

4 to 6s

4. Cleaning
Clean the block Type EMIFILr(Lead Type) in the following
conditions.
(1) Cleaning temperature should be limited to 60C max.
(40C max for alcohol type cleaner).
(2) Ultrasonic cleaning should comply with the following
conditions, avoiding the resonance phenomenon at the
mounted products and P.C.B.
Power: 20W/liter max.
Frequency: 28 to 40kHz
Time: 5 min. max.
(3) Cleaner
(a) Alcohol type cleaner
Isopropyl alcohol (IPA)
(b) Aqueous agent
Pine Alpha ST-100S

(4) There should be no residual flux or residual cleaner left

after cleaning.
In the case of using aqueous agent, products should be
dried completely after rinsing with de-ionized water in
order to remove the cleaner.
(5) The surface of products may become dirty after cleaning,
but there is no deterioration on mechanical, electrical
characteristics and reliability.
(6) Other cleaning: Please contact us.

Microwave Absorber

Block Type
Soldering
andEMIFILr
Mounting
Block Type EMIFILr

Soldering

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

230

BNX

Block Type EMIFILr

SMD Type

Packaging

Minimum Quantity and Dimensions of 24mm Width Embossed Tape

4.0x10pitch=40.00.2
+0.1
-0

c: 3.50.1

a: 12.40.1

11.50.1

12.00.1

c: Depth of Cavity

Chip Ferrite Bead

1.5

24.00.2

2.00.1

1.750.1

4.00.1

3.30.1

3 max.
1.5

+0.5
-0

0.30.1

b: 9.40.1

Minimum Qty. (pcs.)

180mm Reel 330mm Reel

12.4

9.4

3.5

400

4.0x10pitch=40.00.2
1.5

+0.1
-0

3.60.1

1.5

100

c: 3.60.1

a: 12.40.1

11.50.1

12.00.1

Bulk

24.00.2

2.00.1

1.750.1

4.00.1

1500

Chip EMIFILr

BNX022/023

Dimensions
a

Chip Common Mode Choke Coil

Part Number

Dimension of the cavity is measured at the bottom side.

+0.5
-0

0.30.1

b: 9.40.1

Part Number
BNX024/025

Dimensions
a

12.4

9.4

3.6

Minimum Qty. (pcs.)

180mm reel 330mm reel
400

1500

Bulk
100

Microwave Absorber

(in mm)

Block Type EMIFILr

BlockPackaging
Type EMIFILr

Dimension of the cavity is measured at the bottom side.

"Minimum Quantity" means the number of units of each delivery or order. The quantity should be an integral multiple of the "Minimum Quantity."
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

231

Chip Ferrite Bead

BNX

Block Type EMIFILr Design Kits

No.

Part Number

Quantity
(pcs.)

Common Mode Impedance

(at 10MHz, 20 degrees C)

Rated Voltage
(Vdc)

Rated Current
(A)

1
2
3
4
5
6

PLT10HH450180PN
PLT10HH101150PN
PLT10HH401100PN
PLT10HH501100PN
PLT10HH9016R0PN
PLT10HH1026R0PN

2
2
2
2
2
2

45 (Typ.)
100 (Typ.)
400 (Typ.)
500 (Typ.)
900 (Typ.)
1000 (Typ.)

300
300
100
100
100
100

18
15
10
10
6
6

No.

Part Number

Quantity
(pcs.)

Insertion Loss

Rated Voltage
(Vdc)

Rated Current
(A)

7
8
9
10
11
12
13
14
15

BNX002-01
BNX003-01
BNX005-01
BNX012-01
BNX016-01
BNX022-01
BNX023-01
BNX024H01
BNX025H01

1
1
1
1
1
2
2
2
2

1MHz to 1GHz : 40dB min.

5MHz to 1GHz : 40dB min.
1MHz to 1GHz : 40dB min.
1MHz to 1GHz : 40dB min.
100kHz to 1GHz : 40dB min.
1MHz to 1GHz : 35dB min.
1MHz to 1GHz : 35dB min.
100kHz to 1GHz : 35dB min.
50kHz to 1GHz : 35dB min.

50
150
50
50
25
50
100
50
25

10
10
15
15
15
10
15
15
15

Microwave Absorber

Block
Type EMIFILr
Design
Kits
Block Type EMIFILr

Chip Common Mode Choke Coil

Chip EMIFILr

oEKEPBLCKAD-KIT

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

232

Chip Ferrite Bead

EA
234

Product Detail

235

Notice

238

Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Part Numbering

Chip EMIFILr

Microwave Absorber

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

EA
Chip Ferrite Bead

(Part Number)

Part Numbering

Microwave Absorber

EA

1026

160

200

200

qProduct ID
Product ID
EA

Microwave Absorber

tUnit of Dimension
One capital letter expresses Unit of Dimension (y) and
Dimensions Length (u).

Chip EMIFILr

wSheet Type
Code

Sheet Type

10pp

Iron carbonyl type (UL certified type/Halogen Free type)

2070

Metal Flake Powder (Halogen Free type)

2100

Metal Flake Powder (UL certified type)

3008

Magnetic material (UL certified type/Halogen Free type)

Code

Unit of Dimension

in mm (Standard)

in cm (Standard)

Standard shape is a rectangle.

Please contact us for other shapes.

yDimension (Length)
Expressed by 3 digits including the first decimal place.

Chip Common Mode Choke Coil

eAdhesive Tape Type

Code

Adhesive Tape Type

Standard tape type (Halogen Free type)

Thin Adhesive tape type (Halogen Free type)

No tape type

UL certified type (Halogen Free type)

uDimension (Width)
Expressed by 3 digits including the first decimal place.

Ex.)

Code

Dimension (Length g Width)

M300150

30.0g15.0 mm

C150100

15.0g10.0 cm

rSheet Thickness
Expressed by 3 digits including the second decimal place in mm.
Code

Sheet Thickness

020

0.20mm

Microwave Absorber

Block Type EMIFILr

Ex.)

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

234

EA Series

Microwave Absorber

EA10

EA10

Chip Ferrite Bead

Series

c Packaging
When inquiring, please contact us with size code,
refering to "Part Numbering."

c Rated Value
Applicable Frequency (Typ.)

Thickness (Typ.)

Flame Class

Halogen

Operating Temperature Range

EA1026A100

20.0GHz

1.0mm

UL94V-0

Halogen Free

-40C to +80C

EA1026A160

11.5GHz

1.6mm

UL94V-0

Halogen Free

-40C to +80C

EA1026A180

10.0GHz

1.8mm

UL94V-0

Halogen Free

-40C to +80C

EA1046A180

5.8GHz

1.8mm

UL94V-0

Halogen Free

-40C to +80C

EA1075A270

2.5GHz

2.7mm

UL94V-0

Halogen Free

-40C to +80C

Chip EMIFILr

Part Number

c Reflection Loss (Typ.)

Chip Common Mode Choke Coil

0
5

Reflection Loss (dB)

10
15
20

EA1026A100

25

EA1026A180

EA1075A270

EA1026A160
30

EA1046A180

35
40
2

8
10
12
Frequency (GHz)

14

16

18

20

Microwave Absorber

Block Type EMIFILr

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

235

EA Series

Microwave Absorber

EA20/EA21

EA20/EA21
Chip Ferrite Bead

Series

c Packaging
When inquiring, please contact us with size code,
refering to "Part Numbering."

Chip Common Mode Choke Coil

Chip EMIFILr

c Rated Value
Part Number

Applicable Frequency (Typ.)

Thickness (Typ.)

Flame Class

Halogen

Operating Temperature Range

EA2070A020

0.1 to 3.0GHz

0.20mm

Halogen Free

-40C to +120C

EA2070A050

0.1 to 3.0GHz

0.50mm

Halogen Free

-40C to +120C

EA2070A100

0.1 to 3.0GHz

1.00mm

Halogen Free

-40C to +120C

EA2070B005

0.1 to 3.0GHz

0.05mm

Halogen Free

-40C to +120C

EA2070B010

0.1 to 3.0GHz

0.10mm

Halogen Free

-40C to +120C

EA2070B013

0.1 to 3.0GHz

0.13mm

Halogen Free

-40C to +120C

EA2070B020

0.1 to 3.0GHz

0.20mm

Halogen Free

-40C to +120C

EA2070B050

0.1 to 3.0GHz

0.50mm

Halogen Free

-40C to +120C

EA2100A020

0.1 to 3.0GHz

0.20mm

UL94V-0

-40C to +120C

EA2100A050

0.1 to 3.0GHz

0.50mm

UL94V-0

-40C to +120C

EA2100A100

0.1 to 3.0GHz

1.00mm

UL94V-0

-40C to +120C

EA2100B020

0.1 to 3.0GHz

0.20mm

UL94V-0

-40C to +120C

EA2100B050

0.1 to 3.0GHz

0.50mm

UL94V-0

-40C to +120C

EA2100B100

0.1 to 3.0GHz

1.00mm

UL94V-0

-40C to +120C

c Magnetic Permeability-Reluctance
20

12
M"
8

0
0.1

1.0
Frequency (GHz)

10

Microwave Absorber

Block Type EMIFILr

16

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

236

EA Series

Microwave Absorber

EA30

EA30

Chip Ferrite Bead

Series

c Packaging
When inquiring, please contact us with size code,
refering to "Part Numbering."

c Rated Value
Applicable Frequency (Typ.)

Thickness (Typ.)

Flame Class

Halogen

Operating Temperature Range

EA3008U025

0.1 to 3.0GHz

0.25mm

UL94V-0

Halogen Free

-40C to +120C

EA3008U035

0.1 to 3.0GHz

0.35mm

UL94V-0

Halogen Free

-40C to +120C

EA3008U050

0.1 to 3.0GHz

0.50mm

UL94V-0

Halogen Free

-40C to +120C

EA3008U100

0.1 to 3.0GHz

1.00mm

UL94V-0

Halogen Free

-40C to +120C

EA3008U250

0.1 to 3.0GHz

2.50mm

UL94V-0

Halogen Free

-40C to +120C

Chip EMIFILr

Part Number

c Magnetic Permeability-Reluctance
Chip Common Mode Choke Coil

10

8
M'
M', M"

M"

1
Frequency (GHz)

10

Microwave Absorber

Block Type EMIFILr

0
0.1

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

237

Notice

Microwave Absorber

Notice
o Storage and Operating Conditions
Chip Ferrite Bead

1. Adhesive Tape Stress

This product is designed to use adhesive tape to hold
itself to the object.
And please avoid causing mechanical stress by
bending or variation of the object.
Products shall be located in the sideways
direction to the mechanical stress.

Flat cable

Product

Stress
Poor example

Good example

Microwave
Absorber
Notice
Microwave Absorber

Block Type EMIFILr

Chip Common Mode Choke Coil

Chip EMIFILr

2. Cleaning
Avoid cleaning this product.
3. Handling of the Product
Adhesive tape must be clean to maintain the quality
of adhesion.
Please wipe off any dirt, dust and any kind of oil from
the surface of the object before use.

4. Storage Conditions
(1) Storage period
Products that were inspected by Murata over 6
months ago should be examined and used. This can
be confirmed by the inspection No. marked on the
container.
Adhesiveness should be checked if this period is
exceeded.
(2) Storage conditions
Products should be stored in the warehouse in the
following conditions:
Temperature: -10 to +40C
Humidity: 30 to 70% relative humidity
No rapid change of temperature or humidity
Products should be stored in the warehouse without
heat shock condition, vibration, direct sunlight and
so on.

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

238

Product Guide by Size

Which Size?
inch (mm)

Capacitor Type
Inductor Type

01005 (0402) BLM02AX

0201

(0603)

Simple
Capacitor

LC(RC)
Combined

Common
Mode
T Circuit Filter
Feed Through Choke Coils
Type

p26

BLM03AG
BLM03B
BLM03P

p32
p34
p27

12g11gmax13
BLM03AX
BLM03E
BLM03H

p223

p30
p87

BNX002-01
BNX003-01

p85

025020 (0605)

DLP0QS

p186

03025 (0806)
0402 (1005) BLM15AG

DLP0NS

p187

p42
p44
p36
p90
p88

BLM15AX
BLM15HD
BLM15HB
BLM15GG
BLM15GA

p40
p88

NFM15CC
NFM15PC

p134

NFL15ST

p140

p88
p91

12g11gmax13.5

p91

p223

DLP1ND

p193

(1210)

DLM11G
DLM11S
DLP11S/11R/11T

p184

0603

(1608) BLM18A

BLM18T
BLM18B
BLM18R
BLM18P
BLM18K
BLM18S

p56
p62
p58
p63
p50
p52
p54

BLM18E
BLM18HE
BLM18HG
BLM18HD
BLM18HB
BLM18HK
BLM18G

p96
p92
p92

NFM18CC
NFM18PS
NFM18PC

p135
p125

0805

p80

(2012) BLM21A

p68

BLM21B

p70

BLM21R
BLM21P

1206

(3212)
(3216) BLM31P
Array

p75

Lead

p92
p92

12g11gmax8.5

p98

p73
p66

NFM21CC
NFM21PS
NFM21PC

p136
p128

p224

p145
p146

BNX012-01
BNX016-01

p147

NFL21SP
NFR21GD

p144

NFA21SL

p148
p149

NFW31SP

p150

p152

DLP2AD

p194

DLW21S
DLW21H

p197

DLP31S
DLW31S
DLP31D

p192

NFM3DCC
NFM3DPC

p137

NFM31PC
NFM31KC

p131

p199

p130

9.1g12.1gmax3.3
NFE31PT

p121

p132

p83

1210

(3225) BLE32P

p79

1806

(4516) BLM41P

p77

1812

(4532)

DLW43S

p201

2014

(5036)

DLW5AH
DLW5AT

p177
p179
p181

2020

(5050)

DLW5BS
DLW5BT

p177
p179
p181

2606

(6816)

NFA31CC
NFA31GD

p83

p139

p221

p200

BLA31A
BLA31B

NFM41CC
NFM41PC

Lead

p129

Array

1205

p189
p190
p191

p141
p142
p143

p80

BLA2AB

p185

p126

NFA18SL
NFA18SD

(2010) BLA2AA
Array

NFL18ST
NFL18SP

BNX005-01

p92

Array

0804

Lead

p123

05025 (1506)
0504

LgWgT(mm)

p24

BLM02BX

BLM15B
BLM15P
BLM15E
BLM15HG

Block Type

p196

p153

BNX022-01
BNX023-01
SMD

p138
p133

NFE61PT

9.1g12.1gmax3.7
p221

BNX024H01
BNX025H01
SMD

p122

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

239

Part Number Quick Reference

BLp Series
BLA2AA
BLA2AB
BLA31A
BLA31B
BLE32P
BLM02AX
BLM02BX
BLM03AG
BLM03AX
BLM03B
BLM03E
BLM03H
BLM03PG
BLM03PX
BLM15AG
BLM15AX
BLM15B
BLM15BX
BLM15E
BLM15GA
BLM15GG
BLM15HB
BLM15HD
BLM15HG
BLM15PG/PD
BLM15PX
BLM18A
BLM18B
BLM18EG
BLM18G
BLM18HB
BLM18HD
BLM18HE
BLM18HG
BLM18HK
BLM18K
BLM18P
BLM18R
BLM18S
BLM18T
BLM21A
BLM21B
BLM21P
BLM21R
BLM31P
BLM41P

a a a a a a a a a a a a
a a a a a a a a a a a a
a a a a a a a a a a a a
a a a a a a a a a a a a
a a a a a a a a a a a a
a a a a a a a a a a a
a a a a a a a a a a a
a a a a a a a a a a a
a a a a a a a a a a a

a a a a a a a a a a a a
a a a a a a a a a a a a
a a a a a a a a a a a a
a a a a a a a a a a a
a a a a a a a a a a a
a a a a a a a a a a a
a a a a a a a a a a a

a a a a a a a a a a a a
a a a a a a a a a a a

a a a a a a a a a a a a
a a a a a a a a a a a
a a a a a a a a a a a
a a a a a a a a a a a
a a a a a a a a a a a
a a a a a a a a a a a
a a a a a a a

a a a a a a a a a a a

a a a a a a a a a a a a
a a a a a a a a a a a a
a a a a a a a a a a a

a a a a a a a a a a a a
a a a a a a a a a a a
a a a a a a a a a a a
a a a a a a a a a a a
a a a a a a a a a a a
a a a a a a a a a a a

a a a a a a a a a a a a
a a a a a a a a a a a a
a a a a a a a a a a a a
a a a a a a a a a a a a
a a a a a a a a a a a a
a a a a a a a a a a a a
a a a a a a a a a a a a
a a a a a a a a a a a a
a a a a a a a a a a a a
a a a a a a a a a a a a
a a a a a a a a a a a a

DLp (PLp) Series

NFp Series
p80
p80
p83
p83
p79
p24
p26
p32
p30
p34
p87
p85
p27
p28
p42
p40
p46
p44
p90
p91
p91
p88
p88
p88
p38
p36
p56
p58
p96
p98
p92
p92
p92
p92
p92
p52
p50
p63
p54
p62
p68
p70
p66
p73
p75
p77

NFA18SD
NFA18SL
NFA21SL
NFA31CC
NFA31GD
NFE31PT
NFE61PT
NFL15ST
NFL18SP
NFL18ST
NFL21SP
NFM15CC
NFM15PC
NFM18CC
NFM18PC
NFM18PS
NFM21CC
NFM21PC
NFM21PS
NFM31KC
NFM31PC
NFM3DCC
NFM3DPC
NFM41CC
NFM41PC
NFR21GD
NFW31SP

a a a a a a a a a a a
a a a a a a a a a a a
a a a a a a a a a a a
a a a a a a a a a a
a a a a a a a a a a

a a a a a a a a a a a
a a a a a a a a a a a
a a a a a a a a a a a
a a a a a a a a a a a
a a a a a a a a a a a
a a a a a a a a a a a
a a a a a a a a a a
a a a a a a a a a a
a a a a a a a a a a
a a a a a a a a a a
a a a a a a a a a a
a a a a a a a a a a
a a a a a a a a a a
a a a a a a a a a a
a a a a a a a a a a
a a a a a a a a a a
a a a a a a a a a a
a a a a a a a a a a
a a a a a a a a a a
a a a a a a a a a a
a a a a a a a a a a
a a a a a a a a a a

p147
p145
p148
p139
p153
p121
p122
p140
p143
p141
p144
p134
p123
p135
p126
p125
p136
p129
p128
p132
p131
p137
p130
p138
p133
p152
p150

DLM11G
DLM11S
DLP0NS
DLP0QS
DLP11S/11R/11T
DLP1ND
DLP2AD
DLP31D
DLP31S
DLW21H
DLW21S
DLW31S
DLW43S
DLW5AH
DLW5AT
DLW5BS
DLW5BT
PLT10H

a a a a a a a a a a a
a a a a a a a a a a a

a a a a a a a a a a a a
a a a a a a a a a a a a
a a a a

a a a a a a a a a a a a
a a a a a a a a a a a a
a a a a a a a a a a a a
a a a a a a a a a a a a
a a a a a a a a a a a
a a a a a a a a a a a
a a a a a a a a a a a
a a a a a a a a a a a
a a a a a a a a a a a
a a a a a a a a a a a
a a a a a a a a a a a
a a a a a a a a a a a

a a a a a a a a a a a a

p184
p185
p187
p186
p189
p193
p194
p196
p192
p199
p197
p200
p201
p177
p179
p177
p179
p202

BNX Series
BNX002
BNX003
BNX005
BNX012
BNX016
BNX022
BNX023
BNX024
BNX025

a a a a a a a a a a a a
a a a a a a a a a a a a
a a a a a a a a a a a a
a a a a a a a a a a a a
a a a a a a a a a a a a
a a a a a a a a a a a a
a a a a a a a a a a a a
a a a a a a a a a a a a
a a a a a a a a a a a a

p223
p223
p223
p224
p224
p221
p221
p221
p221

EA Series
EA10
EA20
EA21
EA30

a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a

p235
p236
p236
p237

Alphabetic Product Name Index

3 Terminal Filter

p111

Chip EMIFILr LC Combined Type Array

Block Type EMIFILr LC Combined Type

p221

Chip EMIFILr LC Combined Wire Wound Type p150

Chip Common Mode Choke Coil Film Type

p186

Chip EMIFILr RC Combined Type

p152.153

Chip Common Mode Choke Coil Film Type Array

p193

Chip EMIFILr RC Combined Type Array

p153

Chip Common Mode Choke Coil Multilayer Type

p184

Chip Ferrite Bead

p13

Chip Common Mode Choke Coil Wire Wound Type

p197

Chip Ferrite Bead Array

p80

Chip Common Mode Choke Coil Wire Wound Type For Large Current

p177

Chip Ferrite Bead For GHz Band Noise

p85

Chip EMIFILr Array

p80.83.139.145.148.153

Chip Ferrite Bead For High-GHz Band Noise

p91

Chip EMIFILr Capacitor Type

p111

Common Mode Filter

p169

Chip EMIFILr Capacitor Type Array

p139

EMIFILr

p13.111.169.217

Chip EMIFILr Feed Through Type

p121

EMI Suppression Filter

p13.111.169.217

Chip EMIFILr For Large Current

p27.121.123.125.177.221

LC Combined L Circuit Array

p145

Chip EMIFILr Inductor Type

p13

L Circuit Filter

p145

Chip EMIFILr LC Combined Multilayer Type

p140

Microwave Absorber

p233

Chip EMIFILr LC Combined T Circuit Type

p121.140

PI Circuit Filter

p143.144.150

Chip EMIFILr LC Combined Type

p121

T Circuit Filter

p121.140

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

240

p145

Introduction of Related Catalogs: Ferrite Core, Microwave Absorber/Lead Type EMIFILr

Please refer to catalogs below for ferrite cores, Microwave Absorber and leaded EMIFILr.

Ferrite Core, Microwave Absorber

Ferrite Corefor EMI Suppression
Microwave Absorber
Contents

Thin Type Sandwich Core <FSSA>

Core for Flat Cables <FSRC>
Beads Core <FSRH>
Ring Core <FSRB>
Microwave Absorber <EA>

This Catalog is PDF version only. Please refer to following URL.

http://www.murata.com/products/catalog/pdf/o63e.pdf

Lead Type EMIFILr

EMI Suppression Filters (Lead Type EMIFILr)
Contents

Ferrite Beads Inductors <BL01/02/03>

Disc Type EMIFILr<DSp6/DSp9>
EMIGUARDr(EMIFILr with Varistor Function)
<VFp3/VFp6/VFp9>
Common Mode Choke Coils <PLT>

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

241

Please check Muratas newsletter!

You can learn about electric parts with fun.
http://www.murata.com/products/emicon_fun/
EMICON-FUN! disseminated widely from basics (principles, characteristics, mounting, etc.) of capacitors, EMI suppression filters and inductors
to information can practically be used.
Updated information is also distributed via the mail magazine.

Click here to register as reader

http://go.murata.co.jp/Email_Newsletter_EN.html

You can register from Murata Manufacturing Web site page TOP.
http://www.murata.com/products/

########

########

########

########
########
########
EMIC
########
e fun whi ON-FUN!
#####
le learning
about elec
Th
-----------tronic co
------------ e index of June
14 issue
mponent
-----------s
- Inductor
-----------Room
------------ Produc
-----------tN
------- Proposal ews
of the Lo
ss Re
- In
------------ dustry Pickup - Sm duction in the RF
--------art Ph
Circuit
Expertly --------------------- ones
written ar
-----------tic
--inductors les explain the ba --------------------########
and EMI
sics of ca
########
pacitors,
suppress
########
ion filters
########
.
########
########
########
#####
======
======
======
======
======
======
Product N
======
ews
======
======
======
======
======
======
======
- Large Cu
======
======
rrent Com
======
<PLT10H
mon Mod
======
series>
e Coil fo
r Automot
1. Meets
large curre
ive Availa
ble
nt
2. Suitabl
e for surfa up to 18A max.
suitable fo
ce mount
3. Large
r power lin
comm
ing.
es.
noise supp on mode impeda
nce up to
4. Wide op ression effect.
1000ohm
erat
[at 10mhz
] enables
[PLT10H ing temperature
ra
good
http://new H9016R0 / 401100 nge from -55C
to 125C.
sletter.m
/ 101150
urata.co.
/
45
01
80
jp/c.p?12c
eLnY3hk ]
email Mag

azine: Hav

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

242

This banner is
the entrance of
register form

Cat. No. C31E-26

Global Locations
For details please visit www.murata.com

Note
1 Export Control
For customers outside Japan:
No Murata products should be used or
sold, through any channels, for use in the
design, development, production, utilization,
maintenance or operation of, or otherwise
contribution to (1) any weapons (Weapons of
Mass Destruction [nuclear, chemical or biological
weapons or missiles] or conventional weapons)
or (2) goods or systems specially designed or
intended for military end-use or utilization by
military end-users.
For customers in Japan:
For products which are controlled items subject
to the Foreign Exchange and Foreign Trade Law
of Japan, the export license specied by the law
is required for export.

2 Please contact our sales representatives or

product engineers before using the products in
this catalog for the applications listed below,
which require especially high reliability for the
prevention of defects which might directly
damage a third partys life, body or property, or
when one of our products is intended for use
in applications other than those specified in
this catalog.
1

Aircraft equipment

Aerospace equipment

Undersea equipment

Power plant equipment

Medical equipment

Transportation equipment (vehicles, trains,

ships, etc.)

Traffic signal equipment

Disaster prevention / crime prevention

equipment

Data-processing equipment

10

Application of similar complexity and/or

reliability requirements to the applications
listed above

Murata Manufacturing Co., Ltd.

www.murata.com

3 Product specications in this catalog are as

of March 2014. They are subject to change or
our products in it may be discontinued without
advance notice. Please check with our sales
representatives or product engineers before
ordering. If there are any questions, please contact
our sales representatives or product engineers.
4 Please read rating and CAUTION (for storage,
operating, rating, soldering, mounting and
handling) in this catalog to prevent smoking
and/or burning, etc.
5 This catalog has only typical specications.
Therefore, please approve our product
specications or transact the approval sheet
for product specications before ordering.
6 Please note that unless otherwise specied, we
shall assume no responsibility whatsoever for any
conict or dispute that may occur in connection
with the effect of our and/or a third partys
intellectual property rights and other related
rights in consideration of your use of our products
and/or information described or contained in our
catalogs. In this connection, no representation
shall be made to the effect that any third parties
are authorized to use the rights mentioned above
under licenses without our consent.
7 No ozone depleting substances (ODS) under the
Montreal Protocol are used in our manufacturing
process.