Scribd
Upload
138 views

Advanced Border Alert System Using GPS and With Intelligent Engine Control Unit

This document describes an advanced border alert system for fishermen using GPS and an engine control unit. The system tracks a boat's location via GPS and compares it to the stored maritime boundary coordinates. When the boat crosses into a warning zone near the boundary, an alarm is activated. If the boat continues towards the boundary, the engine control unit cuts the fuel supply to stop the boat via an electronic fuel injector. This low-cost system aims to alert fishermen if they cross borders and stop illegal activities like smuggling while overcoming limitations of existing systems.

Uploaded by

IISRT
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
138 views

Advanced Border Alert System Using GPS and With Intelligent Engine Control Unit

This document describes an advanced border alert system for fishermen using GPS and an engine control unit. The system tracks a boat's location via GPS and compares it to the stored maritime boundary coordinates. When the boat crosses into a warning zone near the boundary, an alarm is activated. If the boat continues towards the boundary, the engine control unit cuts the fuel supply to stop the boat via an electronic fuel injector. This low-cost system aims to alert fishermen if they cross borders and stop illegal activities like smuggling while overcoming limitations of existing systems.

Uploaded by

IISRT
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

International Journal of Electrical and Computing Engineering (IJECE)

Vol. 1, Issue. 4, June 2015


ISSN (Online): 2349-8218

Advanced border alert system


using
H.Eugene Kingsley,
2 GPS
year, and with intelligent Engine
2 year,control unit
D.Jim Isaac,
nd

nd

Department of Electronics

Department of Electronics
D.Jim Isaac, 2 H.Eugene Kingsley
1,2
& Instrumentation,UG Student, Department of Electronics and&Instrumentation
Instrumentation,
Jeppiaar Engineering College,
Chennai, INDIA
Jeppiaar engineering college.
Jeppiaar engineering college.
1

ABSTRACT: This paper introduces an intelligent

is to prevent smugglers and intruders to neglect the


alarm and alert the coast guard.

design which would transform the life of fishermen


community in India. One of the problems faced by the
Indian fishermen is the arrest made by the neighbouring
country. This is because of the lack of knowledge of
their position across the sea. This problem can be
overcome with the dynamic location of the vessel by
using the Global Positioning System and the Electronic
Control Unit that has ARM7 microprocessor. This
processor is fed with the appropriate latitude and
longitude which is taken as the reference, when the boat
crosses the maritime boundary initially it alerts the
fishermen with the alarm and radiates the location of the
boat to the nearest coast station via GSM
communication. When it further nears the maritime
boundary an interrupt is sent to the Engine Control Unit
which controls the speed of the engine with the help of
the electronic fuel injector. Though there are many
proposed system they are not viable due to its high cost
and due to the lack of stopping the vessel, but this
proposal coins a low cost maritime border crossing alert
system by amalgamating the potency of marine GPS
device and the Electronic control unit. By this method,
we can alert the fishermen and also monitor them
thereby preventing illegal activities such as smuggling,
intruders, etc
KEYWORDS: GPS, Engine Control Unit, Electronic
fuel injector

I.

II.

EXISTING SYSYTEM:

At present there are many proposed systems which


help to identify the current location for the vessel.
The systems are GPS and radar based which were
run over by coastal guards. Other systems include
such as the android application, WSN based (RSSI)
[1]. But the above systems are not possible due to
its short range, high cost, time efficiency, etc. The
major drawback of this existing system is that they
never provided a accurate way to control the speed
of the outboard motor which is used by our
common fishermen. All these defects are overcome
in our proposed works.
III.

PROPOSED SYSTEM:

The proposed system is used to denote the


boundary to the fishermen and to stop the boats
from trespassing into the border. It is done by GPS
which receives a signal from the satellite and gives
the current position of the boat. The arm processor
is programmed to compare the current longitudes
and longitudes with the stored longitudes and
longitudes of the border. Each boat has a unique
number through which a record of how many boats
is monitored in the control station [2]. Thus guards
in the shore can reach out the fishermen quickly.
Our system provides an indication to both the
fisherman and to the coastal guard. Thus this
system alerts the fishermen and the coast guard
about the position of the boat. Further attempts of
crossing the border neglecting the alert can be
prevented by controlling the engine through the
engine control unit.

INTRODUCTION:

The issue of fishermen straying into each others


territorial waters has come as a potential irritant, of
which the Indian fishermen are usually charged of
trespassing the maritime boundary. So to stop our
fishermen from crossing the border we have
developed a method to stop our fishermen
navigating towards the other countrys border. The
main objective of this paper is to detect the location
of the boat via GPS which is the most accurate and
fastest way of locating the vessel, alert them with
an alarm and to stop the boat from trespassing into
the Sri Lankan border. The reason to stop the boat

11

International Journal of Electrical and Computing Engineering (IJECE)


Vol. 1, Issue. 4, June 2015
ISSN (Online): 2349-8218

Fig 2, Satellite picture of India - Sri Lankan


border
V.

Fig 1, Flowchart of the process

IV.

GSM:

As then GSM cannot be placed in the middle of the


oceans .So the GSM is placed in the coastal control
station. Thus the station continuously receives the
GPS information through the unique GPS address.
The main aim of this GSM system is to ensure
continuous monitoring of each boat to prevent
smuggling, intruder actions.etc [5].

GPS:

The Global Positioning System (GPS) is a spacebased satellite navigation system which provides
latitude and longitude positions on the Earth. The
satellite observes the latitude and longitude of the
boats position and sends the data to the control
unit. This facility enables to find out whether the
vessel has crossed the border or not. This gives the
current position of the boat to the ARM 7 processor
in the Engine Control Unit. It compares the current
position and stored boundary position if the vessel
is at a distance of one kilometre from the boundary
causes the processor to generate an alarm [3].Using
an algorithm, the position of the vessel with respect
to boundary is found. The latitude and longitude
positions from the GPS are taken from the
microcontroller. The latitudes and longitudes
received from the microcontroller is compared with
the stored longitudes and longitudes [4].

VI.

ENGINE CONTROL UNIT:

The ECU consists of an ARM 7 microprocessor,


random access memory (RAM), read only memory
(ROM), and an input/output interface. This unit is
used to control the speed of the motor when it
crosses the boundary. The Electronic Control Unit
(ECU) can control almost every operation in an
engine including ignition systems. It can be
designed in any way to meet the demands. In our
electronic control unit we use an electronic fuel
injector with a solenoid valve to control the fuel
supply in the engine [6].When the alarm is
generated it is necessary to stop the engine from
moving. So we use an electronic control unit to
control the engine. A normal ECU controls an
engine with a fuel injection system. The fuel
injector is fitted with a solenoid valve which is a

12

International Journal of Electrical and Computing Engineering (IJECE)


Vol. 1, Issue. 4, June 2015
ISSN (Online): 2349-8218
electromagnetically controlled mechanical valve.
When the GPS position matches the stored GPS
location the output of this process is given to the
input of the fuel injector. When the input is given
to the fuel injector to the solenoid valve it cuts the
fuel supply to the engine. Here the output of the
first process is given as a input to the fuel injector.
So this in turn cuts off the fuel supply which stops
the engine from moving forward.

VII.

POWER SUPPLY:

The power supply is provided by fuel, solar panel,


and from a small generator coupled to it. The arm7
processor is programmed in such a way that in case
of low power it also draws power from all these
sources to power the circuit.

Fig 5, Simulated output in danger zone


VIII.

CONCLUSION:

In the recent times the arrest of Indian fishermen


across Sri Lanka and Pakistan has been increased.
The fishermen find it difficult to keep note of the
borders and stray into other countrys borders. Our
aim is to give wireless support to those fishermen
and also to track them if they are found missing.
Our other aim is also to stop illegal activities such
as smuggling. This project is a low cost efficient
method of wireless tracking. It also gives sufficient
information to both ship and coastal guardians of
anyone crossing the border. The process of routing
the fishermen will make it more efficient. The
process of increasing the accuracy will be achieved
greater in the near future.

Fig 3, simulated output while inside the border

IX.

REFERENCES:

[1].
G.Sivagnanam , A.J.Midhun, N.Krishna,
G.Maria Samuel Reuben A.Anguraj5 COAST
GUARD ALERT AND RESCUE SYSTEM FOR
INTERNATIONAL
MARITIME
LINE
CROSSING OF FISHERMAN at International
Journal of Innovative Research in Advanced
Engineering (IJIRAE) ISSN: 2349-2163 Issue 2,
Volume 2 (February 2015)
[2]. Abid khan and Ravi Mishra (2012) , GPS
GSM Based Tracking System International
Journal of Engineering Trends and Technology
Volume3Issue2.

Fig 4, simulated output in warning Zone

[3].
GPS-based vessel position monitoring and
display system. This paper appears in: Aerospace
and
Electronic
Systems
Magazine, IEEE
Publication Date: Jul 1990.

13

International Journal of Electrical and Computing Engineering (IJECE)


Vol. 1, Issue. 4, June 2015
ISSN (Online): 2349-8218
[4].M.Malini, Advanced border intrusion and
detection of vessels.

[6]. Kassakian,
Hurton, C.J.
systems circa
Spectrum (IEEE)

[5]. en.wikipedia.org/wiki/ GS M

14

J.G; Wolf, H.-C.; Miller, J.M.;


(1996). "Automotive electrical
2005 - IEEE Spectrum". IEEE
33 (8): 22.

You might also like