SIM800 Series_AT Command

Manual_V1.02

Smart Machine Smart Decision

Document Title:

SIM800 Series AT Commands Manual

Version:

1.02

Date:

2013-10-23

Status:

Release

Document Control ID:

SIM800 Series_AT Command Manual_V1.02

General Notes
SIMCom offers this information as a service to its customers, to support application and
engineering efforts that use the products designed by SIMCom. The information provided is based
upon requirements specifically provided to SIMCom by the customers. SIMCom has not
undertaken any independent search for additional relevant information, including any information
that may be in the customers possession. Furthermore, system validation of this product designed
by SIMCom within a larger electronic system remains the responsibility of the customer or the
customers system integrator. All specifications supplied herein are subject to change.
Copyright
This document contains proprietary technical information which is the property of Shanghai
SIMCom Wireless Solutions Ltd, copying of this document and giving it to others and the using or
communication of the contents thereof, are forbidden without express authority. Offenders are
liable to the payment of damages. All rights reserved in the event of grant of a patent or the
registration of a utility model or design. All specification supplied herein are subject to change
without notice at any time.
Copyright Shanghai SIMCom Wireless Solutions Ltd. 2013

SIM800 Series_AT Command Manual_V1.02

2013-10-23

Smart Machine Smart Decision

Contents
Version History.........................................................................................14
1 Introduction............................................................................................18
1.1 Scope of the document .......................................................................................18
1.2 Related documents..............................................................................................18
1.3 Conventions and abbreviations ..........................................................................18
1.4 AT Command syntax ..........................................................................................18
1.4.1 Basic syntax ...................................................................................................................19
1.4.2 S Parameter syntax.........................................................................................................19
1.4.3 Extended Syntax.............................................................................................................19
1.4.4 Combining AT commands on the same Command line.................................................19
1.4.5 Entering successive AT commands on separate lines.....................................................20

1.5 Supported character sets .....................................................................................20

1.6 Flow control .......................................................................................................20
1.6.1 Software flow control (XON/XOFF flow control).........................................................20
1.6.2 Hardware flow control (RTS/CTS flow control)............................................................21

1.7 Definitions ..........................................................................................................21

1.7.1 Parameter Saving Mode .................................................................................................21
1.7.2 Max Response Time.......................................................................................................22

2 AT Commands According to V.25TER ................................................23

2.1 Overview of AT Commands According to V.25TER .........................................23
2.2 Detailed Description of AT Commands According to V.25TER ........................24
2.2.1 A/ Re-issues the Last Command Given.......................................................................24
2.2.2 ATA Answer an Incoming Call....................................................................................24
2.2.3 ATD Mobile Originated Call to Dial A Number..........................................................25
2.2.4 ATD><n> Originate Call to Phone Number in Current Memory................................27
2.2.5 ATD><str> Originate Call to Phone Number in Memory Which Corresponds to
Field <str>...............................................................................................................................28
2.2.6 ATDL Redial Last Telephone Number Used...............................................................30
2.2.7 ATE Set Command Echo Mode ..................................................................................31
2.2.8 ATH Disconnect Existing Connection.........................................................................31
2.2.9 ATI Display Product Identification Information .........................................................31
2.2.10 ATL Set Monitor speaker loudness............................................................................32
2.2.11 ATM Set Monitor Speaker Mode ..............................................................................32
2.2.12 +++ Switch from Data Mode or PPP Online Mode to Command Mode ..................32
2.2.13 ATO Switch from Command Mode to Data Mode....................................................33
2.2.14 ATP Select Pulse Dialling..........................................................................................33
2.2.15 ATQ Set Result Code Presentation Mode..................................................................34
2.2.16 ATS0 Set Number of Rings before Automatically Answering the Call.....................34
2.2.17 ATS3 Set Command Line Termination Character .....................................................35

SIM800 Series_AT Command Manual_V1.02

2013-10-23

Smart Machine Smart Decision

2.2.18 ATS4 Set Response Formatting Character ................................................................35

2.2.19 ATS5 Set Command Line Editing Character.............................................................36
2.2.20 ATS6 Pause Before Blind Dialling............................................................................37
2.2.21 ATS7 Set Number of Seconds to Wait for Connection Completion..........................37
2.2.22 ATS8 Set Number of Seconds to Wait for Comma Dial Modifier Encountered in
Dial String of D Command .....................................................................................................38
2.2.23 ATS10 Set Disconnect Delay after Indicating the Absence of Data Carrier..............38
2.2.24 ATT Select Tone Dialing ...........................................................................................39
2.2.25 ATV TA Response Format .......................................................................................39
2.2.26 ATX Set CONNECT Result Code Format and Monitor Call Progress .....................40
2.2.27 ATZ Reset Default Configuration .............................................................................41
2.2.28 AT&C Set DCD Function Mode ...............................................................................41
2.2.29 AT&D Set DTR Function Mode................................................................................42
2.2.30 AT&F Factory Defined Configuration ......................................................................42
2.2.31 AT&V Display Current Configuration ......................................................................43
2.2.32 AT&W Store Active Profile ......................................................................................43
2.2.33 AT+GCAP Request Complete TA Capabilities List ..................................................45
2.2.34 AT+GMI Request Manufacturer Identification .........................................................45
2.2.35 AT+GMM Request TA Model Identification ............................................................46
2.2.36 AT+GMR Request TA Revision Identification of Software Release.........................46
2.2.37 AT+GOI Request Global Object Identification .........................................................47
2.2.38 AT+GSN Request TA Serial Number Identification (IMEI) .....................................47
2.2.39 AT+ICF Set TE-TA Control Character Framing........................................................48
2.2.40 AT+IFC Set TE-TA Local Data Flow Control ..........................................................49
2.2.41 AT+IPR Set TE-TA Fixed Local Rate .......................................................................50
2.2.42 AT+HVOIC Disconnect Voice Call Only..................................................................51

3 AT Commands According to 3GPP TS 27.007.....................................52

3.1 Overview of AT Command According to 3GPP TS 27.007 ...............................52
3.2 Detailed Descriptions of AT Command According to 3GPP TS 27.007 ............53
3.2.1 AT+CACM Accumulated Call Meter (ACM) Reset or Query....................................53
3.2.2 AT+CAMM Accumulated Call Meter Maximum (ACM max) Set or Query .............54
3.2.3 AT+CAOC Advice of Charge .....................................................................................55
3.2.4 AT+CBST Select Bearer Service Type........................................................................56
3.2.5 AT+CCFC Call Forwarding Number and Conditions Control ....................................57
3.2.6 AT+CCWA Call Waiting Control ................................................................................59
3.2.7AT+CEER Extended Error Report ...............................................................................60
3.2.8 AT+CGMI Request Manufacturer Identification ........................................................63
3.2.9 AT+CGMM Request Model Identification..................................................................63
3.2.10 AT+CGMR Request TA Revision Identification of Software Release ......................64
3.2.11 AT+CGSN Request Product Serial Number Identification (Identical with +GSN)...64
3.2.12 AT+CSCS Select TE Character Set ...........................................................................65
3.2.13 AT+CSTA Select Type of Address ............................................................................66
3.2.14 AT+CHLD Call Hold and Multiparty........................................................................66

SIM800 Series_AT Command Manual_V1.02

2013-10-23

Smart Machine Smart Decision

3.2.15 AT+CIMI Request International Mobile Subscriber Identity....................................67

3.2.16 AT+CLCC List Current Calls of ME.........................................................................68
3.2.17 AT+CLCK Facility Lock...........................................................................................69
3.2.18 AT+CLIP Calling Line Identification Presentation ...................................................71
3.2.19 AT+CLIR Calling Line Identification Restriction.....................................................72
3.2.20 AT+CMEE Report Mobile Equipment Error.............................................................73
3.2.21 AT+COLP Connected Line Identification Presentation ............................................74
3.2.22 AT+COPS Operator Selection...................................................................................76
3.2.23 AT+CPAS Phone Activity Status...............................................................................77
3.2.24 AT+CPBF Find Phonebook Entries...........................................................................78
3.2.25 AT+CPBR Read Current Phonebook Entries ............................................................79
3.2.26 AT+CPBS Select Phonebook Memory Storage.........................................................80
3.2.27 AT+CPBW Write Phonebook Entry ..........................................................................81
3.2.28 AT+CPIN Enter PIN..................................................................................................82
3.2.29 AT+CPWD Change Password...................................................................................83
3.2.30 AT+CR Service Reporting Control ...........................................................................84
3.2.31 AT+CRC Set Cellular Result Codes for Incoming Call Indication ...........................85
3.2.32 AT+CREG Network Registration..............................................................................86
3.2.33 AT+CRLP Select Radio Link Protocol Parameters ...................................................88
3.2.34 AT+CRSM Restricted SIM Access ...........................................................................88
3.2.35 AT+CSQ Signal Quality Report ................................................................................89
3.2.36 AT+FCLASS FAX: Select, Read or Test Service Class ............................................90
3.2.37 AT+FMI FAX: Report Manufactured ID...................................................................91
3.2.38 AT+FMM FAX: Report Model ID ............................................................................91
3.2.39 AT+FMR FAX: Report Revision ID .........................................................................92
3.2.40 AT+VTD Tone Duration............................................................................................92
3.2.41 AT+VTS DTMF and Tone Generation ......................................................................93
3.2.42 AT+CMUX Multiplexer Control...............................................................................94
3.2.43 AT+CNUM Subscriber Number................................................................................96
3.2.44 AT+CPOL Preferred Operator List............................................................................97
3.2.45 AT+COPN Read Operator Names.............................................................................97
3.2.46 AT+CFUN Set Phone Functionality..........................................................................98
3.2.47 AT+CCLK Clock.......................................................................................................99
3.2.48 AT+CSIM Generic SIM Access ..............................................................................100
3.2.49 AT+CALM Alert Sound Mode................................................................................100
3.2.50 AT+CALS Alert Sound Select.................................................................................101
3.2.51 AT+CRSL Ringer Sound Level...............................................................................102
3.2.52 AT+CLVL Loud Speaker Volume Level .................................................................103
3.2.53 AT+CMUT Mute Control........................................................................................104
3.2.54 AT+CPUC Price Per Unit and Currency Table........................................................104
3.2.55 AT+CCWE Call Meter Maximum Event ................................................................105
3.2.56 AT+CBC Battery Charge.........................................................................................106
3.2.57 AT+CUSD Unstructured Supplementary Service Data...........................................107
3.2.58 AT+CSSN Supplementary Services Notification ....................................................108

SIM800 Series_AT Command Manual_V1.02

2013-10-23

Smart Machine Smart Decision

4 AT Commands According to 3GPP TS 27.005...................................110

4.1 Overview of AT Commands According to 3GPP TS 27.005............................ 110
4.2 Detailed Descriptions of AT Commands According to 3GPP TS 27.005......... 110
4.2.1 AT+CMGD
4.2.2 AT+CMGF
4.2.3 AT+CMGL
4.2.4 AT+CMGR
4.2.5 AT+CMGS
4.2.6 AT+CMGW
4.2.7 AT+CMSS
4.2.8 AT+CNMI
4.2.9 AT+CPMS
4.2.10 AT+CRES
4.2.11 AT+CSAS
4.2.12 AT+CSCA
4.2.13 AT+CSCB
4.2.14 AT+CSDH
4.2.15 AT+CSMP
4.2.16 AT+CSMS

Delete SMS Message............................................................................. 110

Select SMS Message Format ................................................................. 111
List SMS Messages from Preferred Store.............................................. 112
Read SMS Message ............................................................................... 115
Send SMS Message................................................................................ 118
Write SMS Message to Memory .......................................................... 119
Send SMS Message from Storage ..........................................................121
New SMS Message Indications ..............................................................122
Preferred SMS Message Storage ............................................................124
Restore SMS Settings............................................................................125
Save SMS Settings ................................................................................126
SMS Service Center Address ................................................................127
Select Cell Broadcast SMS Messages...................................................128
Show SMS Text Mode Parameters .......................................................129
Set SMS Text Mode Parameters ...........................................................130
Select Message Service.........................................................................131

5 AT Commands for SIM Application Toolkit ......................................133

5.1 Overview ..........................................................................................................133
5.2 Detailed Descriptions of Commands................................................................133
5.2.1 AT+STKTRS STK Terminal Response.....................................................................133
5.2.2 AT+STKENVS STK Envelope Command................................................................134
5.2.3 AT+STKCALL STK call setup .................................................................................135
5.2.4 AT+STKSMS STK SMS delivery.............................................................................136
5.2.5 AT+STKSS STK SS setup ........................................................................................136
5.2.6 AT+STKUSSD STK USSD setup .............................................................................137
5.2.7 AT+STKDTMF STK sending DTMF .......................................................................137
5.2.8 +STKPCI STK Proactive Command Indication .......................................................138
5.2.9 AT+STKMENU STK Main menu command ............................................................139
5.2.10 AT+STKPCIS STK URC switch command ............................................................139

6 AT Commands Special for SIMCom ..................................................141

6.1 Overview ..........................................................................................................141
6.2 Detailed Descriptions of Commands................................................................142
6.2.1 AT+SIDET
Change the Side Tone Gain Level.......................................................142
6.2.2 AT+CPOWD Power off............................................................................................143
6.2.3 AT+SPIC Times Remained to Input SIM PIN/PUK.................................................143
6.2.4 AT+CMIC Change the Microphone Gain Level.......................................................144
6.2.5 AT+CALA Set Alarm Time......................................................................................145
6.2.6 AT+CALD Delete Alarm..........................................................................................146

SIM800 Series_AT Command Manual_V1.02

2013-10-23

Smart Machine Smart Decision

6.2.7 AT+CADC Read ADC .............................................................................................147

6.2.8 AT+CSNS Single Numbering Scheme .....................................................................147
6.2.9 AT+CDSCB Reset Cell Broadcast............................................................................148
6.2.10 AT+CMOD Configure Alternating Mode Calls .....................................................148
6.2.11 AT+CFGRI Indicate RI When Using URC ............................................................149
6.2.12 AT+CLTS Get Local Timestamp............................................................................149
6.2.13 AT+CLDTMF Local DTMF Tone Generation .......................................................151
6.2.14 AT+CDRIND CS Voice/Data Call Termination Indication ...................................152
6.2.15 AT+CSPN Get Service Provider Name from SIM ..................................................153
6.2.16 AT+CCVM Get and Set the Voice Mail Number on the SIM .................................153
6.2.17 AT+CBAND Get and Set Mobile Operation Band .................................................154
6.2.18 AT+CHF Configure Hands Free Operation.............................................................155
6.2.19 AT+CHFA Swap the Audio Channels .....................................................................156
6.2.20 AT+CSCLK Configure Slow Clock ........................................................................157
6.2.21 AT+CENG Switch On or Off Engineering Mode ...................................................158
6.2.22 AT+SCLASS0 Store Class 0 SMS to SIM When Received Class 0 SMS ..............159
6.2.23 AT+CCID Show ICCID ..........................................................................................160
6.2.24 AT+CMTE Set Critical Temperature Operating Mode or Query Temperature ......161
6.2.25 AT+CMGDA Delete All SMS................................................................................161
6.2.26 AT+STTONE Play SIM Toolkit Tone....................................................................162
6.2.27 AT+SIMTONE Generate Specifically Tone...........................................................163
6.2.28 AT+CCPD Enable or Disable Alpha String............................................................164
6.2.29 AT+CGID Get SIM Card Group Identifier.............................................................165
6.2.30 AT+MORING Show State of Mobile Originated Call............................................165
6.2.31 AT+CMGHEX Enable or Disable Sending Non-ASCII Character SMS ...............166
6.2.32 AT+CCODE Configure SMS Code Mode..............................................................167
6.2.33 AT+CIURC Enable or Disable Initial URC Presentation .......................................167
6.2.34 AT+CPSPWD Change PS Super Password ............................................................168
6.2.35 AT+EXUNSOL Enable or Disable Proprietary Unsolicited Indications .................169
6.2.36 AT+CGMSCLASS Change GPRS Multislot Class ................................................169
6.2.37 AT+CDEVICE View Current Flash Device Type ..................................................170
6.2.38 AT+CCALR Call Ready Query ..............................................................................170
6.2.39 AT+GSV Display Product Identification Information.............................................171
6.2.40 AT+SGPIO Control the GPIO .................................................................................171
6.2.41 AT+SPWM Generate the Pulse-Width-Modulation ................................................172
6.2.42 AT+ECHO Echo Cancellation Control ...................................................................173
6.2.43 AT+CAAS Control Auto Audio Switch ..................................................................174
6.2.44 AT+SVR Configure Voice Coding Type for Voice Calls.........................................175
6.2.45 AT+GSMBUSY Reject Incoming Call....................................................................176
6.2.46 AT+CEMNL Set the List of Emergency Number ...................................................177
6.2.47 AT*CELLLOCK Set the List of ARFCN Which Needs to Be Locked...................177
6.2.48 AT+SLEDS Set the Timer Period of Net Light .......................................................178
6.2.49 AT+CBUZZERRING Use the Buzzer Sound as the Incoming Call Ring...............179
6.2.50 AT+CEXTERNTONE Close or Open the Microphone...........................................180

SIM800 Series_AT Command Manual_V1.02

2013-10-23

Smart Machine Smart Decision

6.2.51 AT+CNETLIGHT Close the Net Light or Open It to Shining ................................180

6.2.52 AT+CWHITELIST Set the White List ....................................................................181
6.2.53 AT+CSDT Switch On or Off Detecting SIM Card.................................................182
6.2.54 AT+CSMINS SIM Inserted Status Reporting.........................................................183
6.2.55 AT+CSGS Netlight Indication of GPRS Status .....................................................183
6.2.56 AT+CMICBIAS Close or Open the MICBIAS ......................................................184
6.2.57 AT+DTAM Set TTS and RECORD Play Mode in Call .........................................185
6.2.58 AT+SJDR Set Jamming Detection Function ...........................................................186
6.2.59 AT+CPCMCFG Set PCM Parameter ......................................................................187
6.2.60 AT+CPCMSYNC Set PCM Sync Parameter...........................................................188
6.2.61 AT+CANT Antenna Detecting ................................................................................189
6.2.62 AT+CAGCSET Close or Open AGC Function .......................................................190

7 AT Commands for GPRS Support ......................................................192

7.1 Overview of AT Commands for GPRS Support...............................................192
7.2 Detailed Descriptions of AT Commands for GPRS Support............................192
7.2.1 AT+CGATT Attach or Detach from GPRS Service ..................................................192
7.2.2 AT+CGDCONT Define PDP Context .......................................................................193
7.2.3 AT+CGQMIN Quality of Service Profile (Minimum Acceptable) ...........................194
7.2.4 AT+CGQREQ Quality of Service Profile (Requested) .............................................195
7.2.5 AT+CGACT PDP Context Activate or Deactivate ....................................................197
7.2.6 AT+CGDATA Enter Data State .................................................................................198
7.2.7 AT+CGPADDR Show PDP Address .........................................................................198
7.2.8 AT+CGCLASS GPRS Mobile Station Class.............................................................199
7.2.9 AT+CGEREP Control Unsolicited GPRS Event Reporting ......................................200
7.2.10 AT+CGREG Network Registration Status ..............................................................201
7.2.11 AT+CGSMS Select Service for MO SMS Messages ..............................................202

8 AT Commands for TCPIP Application Toolkit ..................................204

8.1 Overview ..........................................................................................................204
8.2 Detailed Descriptions of Commands................................................................205
8.2.1 AT+CIPMUX Start Up Multi-IP Connection ............................................................205
8.2.2 AT+CIPSTART Start Up TCP or UDP Connection...................................................205
8.2.3 AT+CIPSEND Send Data Through TCP or UDP Connection...................................207
8.2.4 AT+CIPQSEND Select Data Transmitting Mode .....................................................209
8.2.5 AT+CIPACK Query Previous Connection Data Transmitting State..........................210
8.2.6 AT+CIPCLOSE Close TCP or UDP Connection ..................................................... 211
8.2.7 AT+CIPSHUT Deactivate GPRS PDP Context ........................................................ 211
8.2.8 AT+CLPORT Set Local Port .....................................................................................212
8.2.9 AT+CSTT Start Task and Set APN, USER NAME, PASSWORD...........................213
8.2.10 AT+CIICR Bring Up Wireless Connection with GPRS or CSD .............................214
8.2.11 AT+CIFSR Get Local IP Address............................................................................214
8.2.12 AT+CIPSTATUS Query Current Connection Status ...............................................215
8.2.13 AT+CDNSCFG Configure Domain Name Server...................................................216

SIM800 Series_AT Command Manual_V1.02

2013-10-23

Smart Machine Smart Decision

8.2.14 AT+CDNSGIP Query the IP Address of Given Domain Name...............................217

8.2.15 AT+CIPHEAD Add an IP Head at the Beginning of a Package Received..............218
8.2.16 AT+CIPATS Set Auto Sending Timer .....................................................................218
8.2.17 AT+CIPSPRT Set Prompt of > When Module Sends Data...................................219
8.2.18 AT+CIPSERVER Configure Module as Server ......................................................220
8.2.19 AT+CIPCSGP Set CSD or GPRS for Connection Mode ........................................221
8.2.20 AT+CIPSRIP Show Remote IP Address and Port When Received Data ................222
8.2.21 AT+CIPDPDP Set Whether to Check State of GPRS Network Timing ..................223
8.2.22 AT+CIPMODE Select TCPIP Application Mode....................................................223
8.2.23AT+CIPCCFG Configure Transparent Transfer Mode ............................................224
8.2.24 AT+CIPSHOWTP Display Transfer Protocol in IP Head When Received Data.....225
8.2.25 AT+CIPUDPMODE UDP Extended Mode.............................................................226
8.2.26 AT+CIPRXGET Get Data from Network Manually ...............................................227
8.2.27 AT+CIPSCONT Save TCPIP Application Context .................................................229
8.2.28 AT+CIPRDTIMER Set Remote Delay Timer ........................................................230
8.2.29 AT+CIPSGTXT Select GPRS PDP context ...........................................................231

9 AT Commands for IP Application.......................................................232

9.1 Overview ..........................................................................................................232
9.2 Detailed Descriptions of Commands................................................................232
9.2.1 AT+SAPBR

Bearer Settings for Applications Based on IP.......................................232

10 AT Commands for PING Support .....................................................234

10.1 Overview ........................................................................................................234
10.2 Detailed Descriptions of Commands..............................................................234
10.2.1 AT+CIPPING PING Request..................................................................................234
10.2.2 AT+CIPCTL Set the Mode When Receiving an IP Packet .....................................235
10.2.3 AT+CIPFLT Set the Rules of IP Filter ....................................................................236

11 AT Commands for HTTP Application ..............................................238

11.1 Overview ........................................................................................................238
11.2 Detailed Descriptions of Commands..............................................................238
11.2.1 AT+HTTPINIT Initialize HTTP Service .................................................................238
11.2.2 AT+HTTPTERM Terminate HTTP Service ............................................................239
11.2.3 AT+HTTPPARA Set HTTP Parameters Value ........................................................239
11.2.4 AT+HTTPDATA Input HTTP Data .........................................................................241
11.2.5 AT+HTTPACTION HTTP Method Action .............................................................241
11.2.6 AT+HTTPREAD Read the HTTP Server Response................................................243
11.2.7 AT+HTTPSCONT Save HTTP Application Context ..............................................244
11.2.8 AT+HTTPSTATUS Read HTTP Status ...................................................................245

12 AT Commands for FTP Application .................................................247

12.1 Overview ........................................................................................................247
12.2 Detailed Descriptions of Commands..............................................................247

SIM800 Series_AT Command Manual_V1.02

2013-10-23

Smart Machine Smart Decision

12.2.1 AT+FTPPORT Set FTP Control Port ......................................................................247

12.2.2 AT+FTPMODE Set Active or Passive FTP Mode ..................................................248
12.2.3 AT+FTPTYPE Set the Type of Data to Be Transferred...........................................249
12.2.4 AT+FTPPUTOPT Set FTP Put Type .......................................................................249
12.2.5 AT+FTPCID Set FTP Bearer Profile Identifier .......................................................250
12.2.6 AT+FTPREST Set Resume Broken Download .......................................................251
12.2.7 AT+FTPSERV Set FTP Server Address ..................................................................251
12.2.8 AT+FTPUN Set FTP User Name ............................................................................252
12.2.9 AT+FTPPW Set FTP Password ...............................................................................253
12.2.10 AT+FTPGETNAME Set Download File Name ....................................................253
12.2.11 AT+FTPGETPATH Set Download File Path.........................................................254
12.2.12 AT+FTPPUTNAME Set Upload File Name .........................................................255
12.2.13 AT+FTPPUTPATH Set Upload File Path..............................................................255
12.2.14 AT+FTPGET Download File ................................................................................256
12.2.15 AT+FTPPUT Set Upload File ...............................................................................257
12.2.16 AT+FTPSCONT Save FTP Application Context ..................................................258
12.2.17 AT+FTPDELE Delete Specified File in FTP Server .............................................259
12.2.18 AT+FTPSIZE Get the Size of Specified File in FTP Server .................................260
12.2.19 AT+FTPSTATE Get the FTP State ........................................................................261
12.2.20 AT+FTPEXTPUT Extend Upload File.....................................................................261
12.2.21 AT+FTPMKD Make Directory on the Remote Machine ......................................262
12.2.22 AT+FTPRMD Remove Directory on the Remote Machine ..................................263
12.2.23 AT+FTPLIST List Contents of Directory on the Remote Machine.......................263

13 AT Commands for GSM Location Application ................................265

13.1 Overview ........................................................................................................265
13.2 Detailed Descriptions of Commands..............................................................265
13.2.1 AT+CIPGSMLOC GSM Location and Time ............................................................265

14 AT Commands for Email Application...............................................267

14.1 Overview ........................................................................................................267
14.2 Detailed Descriptions of Commands..............................................................268
14.2.1 AT+EMAILCID Set Email Bearer Profile Identifier..............................................268
14.2.2 AT+EMAILTO Set Timeout Value of SMTP/POP3 Server Response ..................268
14.2.3 AT+SMTPSRV Set SMTP Server Address and Port..............................................269
14.2.4 AT+SMTPAUTH Set User Name and Password for SMTP Authentication..........270
14.2.5 AT+SMTPFROM Set Sender Address and Name ..................................................271
14.2.6 AT+SMTPRCPT Set the Email Recipient(TO/CC/BCC) Address and Name........272
14.2.7 AT+SMTPSUB Set the Email Subject....................................................................273
14.2.8 AT+SMTPBODY Set the Email Body ...................................................................273
14.2.9 AT+SMTPFILE Set the Email Attachment ............................................................274
14.2.10 AT+SMTPSEND Send the Email .........................................................................275
14.2.11 AT+SMTPFT Transfer the Email Attachment ......................................................276
14.2.12 AT+SMTPCS Set the Email Charset ....................................................................277

SIM800 Series_AT Command Manual_V1.02

10

2013-10-23

Smart Machine Smart Decision

14.2.13 AT+POP3SRV Set POP3 Server and Account .....................................................278

14.2.14 AT+POP3IN Log in POP3 Server ........................................................................279
14.2.15 AT+POP3NUM Get Email Number and Total Size..............................................279
14.2.16 AT+POP3LIST Get the Specific Email Size ........................................................280
14.2.17 AT+POP3UIDL Get the Specific Email Unique-id ..............................................281
14.2.18 AT+POP3CMD Get Multi-line Response.............................................................282
14.2.19 AT+POP3READ Read Multi-line Response ........................................................284
14.2.20 AT+POP3DEL Mark the Specific Email to Delete...............................................285
14.2.21 AT+POP3RSET Unmark the Emails that Be Marked as Deleted.........................286
14.2.22 AT+POP3OUT Log Out POP3 Server..................................................................287

15 AT Commands for MMS Application...............................................288

15.1 Overview ........................................................................................................288
15.2 Detailed Descriptions of Commands..............................................................289
15.2.1 AT+CMMSCURL Set the URL of the MMS center ..............................................289
15.2.2 AT+CMMSPROTO Set the protocol parameter and MMS proxy..........................289
15.2.3 AT+CMMSCID Set the network parameters for MMS ..........................................290
15.2.4 AT+CMMSSENDCFG Set the parameters for sending MMS ...............................291
15.2.5 AT+CMMSEDIT Enter or exit edit mode ..............................................................292
15.2.6 AT+CMMSDOWN Download the file data or title from UART............................293
15.2.7 AT+CMMSDELFILE Delete the file of the edited MMS by file index .................294
15.2.8 AT+CMMSSEND Start MMS sending...................................................................295
15.2.9 AT+CMMSRECP Add recipients...........................................................................295
15.2.10 AT+CMMSCC Add copy recipients.....................................................................296
15.2.11 AT+CMMSBCC Add Secret Recipients...............................................................297
15.2.12 AT+CMMSDELRECP Delete recipients..............................................................298
15.2.13 AT+CMMSDELCC Delete copy recipients..........................................................298
15.2.14 AT+CMMSDELBCC Delete secret recipients .....................................................299
15.2.15 AT+CMMSRECV Receive MMS ........................................................................300
15.2.16 AT+CMMSVIEW Get the MMS into buffer and show the information ..............301
15.2.17 AT+CMMSREAD Read the given file of the MMS in the buffer ........................302
15.2.18 AT+CMMSRDPUSH Read the information of the MMS PUSH message...........302
15.2.19 AT+CMMSUA Set User Agent ............................................................................304
15.2.20 AT+CMMSPROFILE Set User Agent Profile ......................................................305
15.2.21 AT+CMMSTIMEOUT Set MMS Timeout...........................................................305
15.2.22 AT+CMMSSTATUS Get MMS Status ................................................................306
15.2.23 AT+CMMSINIT Initialize MMS Function...........................................................307
15.2.24 AT+CMMSTERM Exit MMS Function ...............................................................307
15.2.25 AT+CMMSSCONT Save MMS Context..............................................................308

16 AT Commands for DDET Application..............................................310

16.1 Overview ........................................................................................................310
16.2 Detailed Descriptions of Commands..............................................................310
16.2.1 AT+DDET

DTMF Detection Control.....................................................................310

SIM800 Series_AT Command Manual_V1.02

11

2013-10-23

Smart Machine Smart Decision

17 AT Commands for RECORD Application ........................................312

17.1 Overview ........................................................................................................312
17.2 Detailed Descriptions of Commands..............................................................312
17.2.1 AT+CREC record operation....................................................................................312
17.2.2 AT+CRECORD Record And Send Data To UART.................................................315

18 AT Commands for TTS Application .................................................317

18.1 Overview ........................................................................................................317
18.2 Detailed Descriptions of Commands..............................................................317
18.2.1 AT+CTTS TTS Operation.......................................................................................317
18.2.2 AT+CTTSPARAM Set parameters of the TTS playing ..........................................318

19 Supported Unsolicited Result Codes .................................................320

19.1 Summary of CME ERROR Codes .................................................................320
19.2 Summary of CMS ERROR Codes .................................................................323
19.3 Summary of Unsolicited Result Codes ..........................................................327

20 AT Commands Examples ..................................................................331

20.1 Profile Commands ..........................................................................................331
20.2 SIM Commands..............................................................................................332
20.3 General Commands ........................................................................................333
20.4 Call Control Commands .................................................................................333
20.5 SIM Toolkit Commands .................................................................................335
20.6 Audio Commands ...........................................................................................335
20.7 SMS Commands.............................................................................................336
20.8 GPRS Commands...........................................................................................337
20.9 TCPIP Commands ..........................................................................................339
20.10 IP Commands ...............................................................................................339
20.11 PING Commands..........................................................................................339
20.12 HTTP and FTP Commands ..........................................................................340
20.13 GSM Location Commands ...........................................................................340
20.14 EMAIL Commands ......................................................................................341
20.15 MMS Commands .........................................................................................341
20.16 DDET Commands ........................................................................................342
20.17 RECORD Commands...................................................................................344
20.18 TTS Commands............................................................................................345

21 ATC Differences among SIM800 Series...........................................347

21.1 AT+CSDT.......................................................................................................347
21.2 AT+CSMINS ..................................................................................................347
21.3 AT+SGPIO......................................................................................................347
21.4 AT+CBAND ...................................................................................................348
21.5 AT+CTTSPARAM .........................................................................................348

SIM800 Series_AT Command Manual_V1.02

12

2013-10-23

Smart Machine Smart Decision

21.6 AT+CHFA.......................................................................................................348

SIM800 Series_AT Command Manual_V1.02

13

2013-10-23

Smart Machine Smart Decision

Version History
Version

Date

Chapter

What is new

V1.00
V1.01

New version
2013-07-23

All

Modify GSM 07.05 to 3GPP TS

27.005,modify GSM 07.07 to 3GPP TS
27.007

1.1 Scope of the document

Add SIM800

2.2.8 ATH

Delete ATH parameter [n]

2.2.12 +++

Change "0.5 second" to "1 second"

2.2.13 ATO

Change "NO CARRIER" to "ERROR"

2.2.26 ATX

Change default value from 0 to 4

2.2.32 AT&W

Add AT+CFGRI,AT+CSGS

2.2.41.1 Auto-bauding

Disable DTR auto-bauding

3.2.14 AT+CHLD

Delete parameter of CHLD

3.2.18 AT+CLIP

Change URC parameter

3.2.51 AT+CRSL

Delete reference Note

3.2.7 AT+CEER

Change description of 34 (emergency

call not possible)

4.2.10 AT+CRES

Delete description of CSCB

4.2.11 AT+CSAS

Delete description of CSCB

6.2.4 AT+CMIC

Add reference Note

6.2.11 AT+CFGRI

Add default value

6.2.16 AT+CCVM

Modify Test Command response

information and parameter description

6.2.18 AT+CHF

Add URC

6.2.26 AT+STTONE

Change <duration> supported

range;delete reference note

6.2.27 AT+SIMTONE

Modify last parameter of Test

Command to 10-500000

6.2.48 AT+SLEDS

Modify default value

6.2.55 AT+CSGS

Add ATC

6.2.56 AT+CMICBIAS

Add ATC

8.2.2 AT+CIPSTART

Modify parameter

8.2.15 AT+CIPHEAD

Modify parameter

8.2.20 AT+CIPSRIP

Modify parameter

8.2.23 AT+CIPCCFG

Modify write cmd parameters

8.2.26 AT+CIPRXGET

Add "single IP & multi IP connection"

SIM800 Series_AT Command Manual_V1.02

14

2013-10-23

Smart Machine Smart Decision

information
9.2.1 AT+SAPBR

Modify parameter

12.2.23 AT+FTPLIST

Change "Execution Command" to

"Write Command"

14.2.8 AT+SMTPBODY

Change "Execution Command" to

"Write Command"

14.2.10 AT+SMTPSEND

Modify parameter

14.2.11 AT+SMTPFT

Change "Execution Command" to

"Write Command"

15.2.15 AT+CMMSRECV

Change reference note

15.2.21
AT+CMMSTIMEOUT

Change "milliseconds" to "seconds"

15.2.25 AT+CMMSSCONT

Modify parameter of Execution

Command

17.2.1 AT+CREC

Add note

18.2.2 AT+CTTSPARAM

Modify parameter;add note

20.8 GPRS Commands

Modify the CGQREQ example

20.17 RECORD Commands

Add example

3.2.17 AT+CLCK

Add Max Response Time

3.2.22 AT+COPS

Add Max Response Time

3.2.29 AT+CPWD

Add Max Response Time

3.2.28 AT+CPIN

Add Max Response Time

3.2.41 AT+VTS

Add Max Response Time

3.2.44 AT+CPOL

Add Max Response Time

3.2.45 AT+COPN

Add Max Response Time

3.2.54 AT+CPUC

Add Max Response Time

6.2.7 AT+CADC

Add Max Response Time

6.2.23 AT+CCID

Add Max Response Time

7.2.1 AT+CGATT

Add Max Response Time

7.2.5 AT+CGACT

Add Max Response Time

3.2.24 AT+CPBF

Modify description of max response

time

3.2.25 AT+CPBR

Modify description of max response

time

4.2.1 CMGD

Modify description of max response

time

4.2.3 CMGL

Modify description of max response

time

6.2.25 CMGDA

Modify description of max response

SIM800 Series_AT Command Manual_V1.02

15

2013-10-23

Smart Machine Smart Decision

time

V1.02

2013-10-23

15.2.8 AT+CMMSSEND

Modify description of max response

time

15.2.15 AT+CMMSRECV

Modify description of max response

time

2.2.16 ATS0

Add parameter saving mode

2.2.20 ATS6

Add parameter saving mode

2.2.21 ATS7

Add parameter saving mode

2.2.22 ATS8

Add parameter saving mode

2.2.26 ATX

Add parameter saving mode

3.2.4 AT+CBST

Add parameter saving mode

3.2.16 AT+CLCC

Add parameter saving mode

3.2.12 AT+CSCS

Add parameter saving mode

3.2.51 AT+CRSL

Add parameter saving mode

3.2.52 AT+CLVL

Add parameter saving mode

6.2.33 AT+CIURC

Add parameter saving mode

6.2.53 AT_CSDT

Add parameter saving mode

6.2.54 AT+CSMINS

Add parameter saving mode

3.2.32 AT+CREG

Modify parameter save mode

6.2.44 AT+SVR

Modify parameter save mode

7.2.10 AT+CGREG

Modify parameter save mode

3.2.24 AT+CPBS

Delete parameter save mode

3.2.25 AT+CPBW

Delete parameter save mode

2.2.28 AT&C

Modify the format

3.2.5 AT+CCFC

Change error
<reason>

3.2.33 AT+CRLP

Add Save mode and reference

3.2.36 AT+FCLASS

Modify information about +FCLASS

3.2.47 AT+CCLK

Add note

4.2.5 AT+CMGS

Add Note

6.2.18 AT+CHF

Modify parameter range and note

6.2.19 AT+CHFA

Add patameters of write command and

test command,modify note

6.2.20 AT+CSCLK

Add new parameter and note

6.2.24 AT+CMTE

Increase the temperature range

6.2.28 AT+CCPD

Set default value

6.2.33 AT+CIURC

Set default value

6.2.41 AT+SPWM

Modify parameter direction and note

6.2.51 AT+CNETLIGHT

Add test and read command

6.2.53 AT+CSDT

Modify note

SIM800 Series_AT Command Manual_V1.02

16

word:

<reads>

to

2013-10-23

Smart Machine Smart Decision

2013-10-25

6.2.55 AT+CSGS

Modify parameter default value

6.2.56 AT+CMICBIAS

Add default value

parameter description

6.2.57 AT+DTAM

Add AT command

6.2.58 AT+SJDR

Add AT command

6.2.59 AT+CPCMCFG

Add AT command

6.2.60 AT+CPCMSYNC

Add AT command

6.2.61 AT+CANT

Add AT command

6.2.62 AT+CAGCSET

Add AT command

7.2.9 AT+CGEREP

Modify parameter description and add

URC example

8.2.7 AT+CIPSHUT

Add Max Response Time

8.2.10 AT+CIICR

Add Max Response Time

8.2.21 AT+CIPDPDP

Modify parameters scope

8.2.26 AT+CIPRXGET

Modify parameter options

16.2.1 AT+DDET

Add parameter and URC description in

write command,add note

17.2.1 AT+CREC

Modify note

17.2.2 AT+CRECORD

Add AT command

18.2.2 AT+CTTSPARAM

Modify note and parameter default

value

20.16 AT+DDET

Modify AT+DDET example

21.5 AT+CTTSPARAM

Add differences of some AT commands

21.6 AT+CHFA

Add differences of some AT commands

AT+CEXTHS,AT+CEXBUT

Delete

All

Add or modify Parameter Saving Mode

and Max Response Time

5.2.1 AT+STKTRS

Modify the length of parameter

SIM800 Series_AT Command Manual_V1.02

17

and

modify

2013-10-23

Smart Machine Smart Decision

1 Introduction
1.1 Scope of the document
This document presents the AT Command Set for SIMCom SIM800 Series, including SIM800,
SIM800W, SIM800V, SIM800L and SIM800H.

1.2 Related documents

You can visit the SIMCom Website using the following link:
http://www.sim.com

1.3 Conventions and abbreviations

In this document, the GSM engines are referred to as following term:
ME (Mobile Equipment);
MS (Mobile Station);
TA (Terminal Adapter);
DCE (Data Communication Equipment) or facsimile DCE (FAX modem, FAX board);
In application, controlling device controls the GSM engine by sending AT Command via its
serial interface. The controlling device at the other end of the serial line is referred to as
following term:
TE (Terminal Equipment);
DTE (Data Terminal Equipment) or plainly "the application" which is running on an embedded
system;

1.4 AT Command syntax

The "AT" or "at" or aT or Atprefix must be set at the beginning of each Command line. To
terminate a Command line enter <CR>.
Commands are usually followed by a response that includes.
"<CR><LF><response><CR><LF>"
Throughout this document, only the responses are presented, <CR><LF> are omitted
intentionally.
The AT Command set implemented by SIM800 Series is a combination of 3GPP TS 27.005,
3GPP TS 27.007 and ITU-T recommendation V.25ter and the AT commands developed by
SIMCom.
Note: A HEX string such as "00 49 49 49 49 FF FF FF FF" will be sent out through serial
port at the baud rate of 115200 immediately after SIM800 Series is powered on. The string
shall be ignored since it is used for synchronization with PC tool. Only enter AT Command
SIM800 Series_AT Command Manual_V1.02

18

2013-10-23

Smart Machine Smart Decision

through serial port after SIM800 Series is powered on and Unsolicited Result Code "RDY"
is received from serial port. If auto-bauding is enabled, the Unsolicited Result Codes
"RDY" and so on are not indicated when you start up the ME, and the "AT" prefix, or
"at" prefix must be set at the beginning of each command line.
All these AT commands can be split into three categories syntactically: "basic", "S parameter",
and "extended". These are as follows:
1.4.1 Basic syntax
These AT commands have the format of "AT<x><n>", or "AT&<x><n>", where "<x>"is the
Command, and "<n>"is/are the argument(s) for that Command. An example of this is "ATE<n>",
which tells the DCE whether received characters should be echoed back to the DTE according to
the value of "<n>". "<n>" is optional and a default will be used if missing.
1.4.2 S Parameter syntax
These AT commands have the format of "ATS<n>=<m>", where "<n>" is the index of the S
register to set, and "<m>"is the value to assign to it. "<m>" is optional; if it is missing, then a
default value is assigned.
1.4.3 Extended Syntax
These commands can operate in several modes, as in the following table:

Table 1: Types of AT commands and responses

Test Command

AT+<x>=?

The mobile equipment returns the list of parameters

and value ranges set with the corresponding Write
Command or by internal processes.

Read Command

AT+<x>?

This command returns the currently set value of the

parameter or parameters.

Write Command

AT+<x>=<>

This command sets the user-definable parameter

values.

Execution Command

AT+<x>

The execution command reads non-variable

parameters affected by internal processes in the GSM
engine.

1.4.4 Combining AT commands on the same Command line

You can enter several AT commands on the same line. In this case, you do not need to type the
"AT" or "at" prefix before every command. Instead, you only need type "AT" or "at" the
beginning of the command line. Please note to use a semicolon as the command delimiter after

SIM800 Series_AT Command Manual_V1.02

19

2013-10-23

Smart Machine Smart Decision

an extended command; in basic syntax or S parameter syntax, the semicolon need not enter, for
example: ATE1Q0S0=1S3=13V1X4;+IFC=0,0;+IPR=115200;&W.
The Command line buffer can accept a maximum of 556 characters (counted from the first
command without AT or at prefix). If the characters entered exceeded this number then none
of the Command will executed and TA will return "ERROR".
1.4.5 Entering successive AT commands on separate lines
When you need to enter a series of AT commands on separate lines, please Note that you need to
wait the final response (for example OK, CME error, CMS error) of last AT Command you
entered before you enter the next AT Command.

1.5 Supported character sets

The SIM800 Series AT Command interface defaults to the IRA character set. The SIM800 Series
supports the following character sets:
GSM format
UCS2
HEX
IRA
PCCP
PCDN
8859-1
The character set can be set and interrogated using the "AT+CSCS" Command (3GPP TS
27.007). The character set is defined in GSM specification 3GPP TS 27.005.
The character set affects transmission and reception of SMS and SMS Cell Broadcast messages,
the entry and display of phone book entries text field and SIM Application Toolkit alpha strings.

1.6 Flow control

Flow control is very important for correct communication between the GSM engine and DTE.
For in the case such as a data or fax call, the sending device is transferring data faster than the
receiving side is ready to accept. When the receiving buffer reaches its capacity, the receiving
device should be capable to cause the sending device to pause until it catches up.
There are basically two approaches to achieve data flow control: software flow control and
hardware flow control. SIM800 Series support both two kinds of flow control.
In Multiplex mode, it is recommended to use the hardware flow control.
1.6.1 Software flow control (XON/XOFF flow control)
Software flow control sends different characters to stop (XOFF, decimal 19) and resume (XON,
decimal 17) data flow. It is quite useful in some applications that only use three wires on the
serial interface.
SIM800 Series_AT Command Manual_V1.02

20

2013-10-23

Smart Machine Smart Decision

The default flow control approach of SIM800 Series is hardware flow control (RTS/CTS flow
control), to enable software flow control in the DTE interface and within GSM engine, type the
following AT Command:
AT+IFC=1, 1
This setting is stored volatile, for use after restart, AT+IFC=1, 1 should be stored to the user
profile with AT&W.
NOTE:
The AT commands listed in the table of AT&W chapter should be stored to user profile with
AT&W for use after restart. Most other AT commands in V.25, 3GPP TS 27.005, 3GPP TS
27.007,GPRS will store parameters automatically and can be used after module restart.
Ensure that any communications software package (e.g. Hyper terminal) uses software flow
control.
NOTE:
Software Flow control should not be used for data calls where binary data will be transmitted or
received (e.g. TCP/IP) as the DTE interface may interpret binary data as flow control characters.
1.6.2 Hardware flow control (RTS/CTS flow control)
Hardware flow control achieves the data flow control by controlling the RTS/CTS line. When the
data transfer should be suspended, the CTS line is set inactive until the transfer from the
receiving buffer has completed. When the receiving buffer is ok to receive more data, CTS goes
active once again.
To achieve hardware flow control, ensure that the RTS/CTS lines are present on your application
platform.

1.7 Definitions
1.7.1 Parameter Saving Mode
For the purposes of the present document, the following syntactical definitions apply:
z NO_SAVE: The parameter of the current AT command will be lost if module is rebooted or
current AT command doesn't have parameter.
z AUTO_SAVE: The parameter of the current AT command will be kept in NVRAM
automatically, and it won't be lost if module is rebooted.
z AT&W_SAVE: The parameter of the current AT command will be kept in NVRAM by
sending the command of AT&W.

SIM800 Series_AT Command Manual_V1.02

21

2013-10-23

Smart Machine Smart Decision

1.7.2 Max Response Time

Max response time is estimated maximum time to get response, the unit is seconds.
"-" means this AT command doesnt care the response time.

SIM800 Series_AT Command Manual_V1.02

22

2013-10-23

Smart Machine Smart Decision

2 AT Commands According to V.25TER

These AT Commands are designed according to the ITU-T (International Telecommunication
Union, Telecommunication sector) V.25ter document.

2.1 Overview of AT Commands According to V.25TER

Command

Description

A/

Re-issues the last command given

ATA

Answer an incoming call

ATD

Mobile originated call to dial a number

ATD><N>

Originate call to phone number in current memory

ATD><STR>

Originate call to phone number in memory which corresponds to field

<str>

ATDL

Redial last telephone number used

ATE

Set command echo mode

ATH

Disconnect existing connection

ATI

Display product identification information

ATL

Set monitor speaker loudness

ATM

Set monitor speaker mode

+++

Switch from data mode or ppp online mode to command mode

ATO

Switch from command mode to data mode

ATP

Select pulse dialling

ATQ

Set result code presentation mode

ATS0

Set number of rings before automatically answering the call

ATS3

Set command line termination character

ATS4

Set response formatting character

ATS5

Set command line editing character

ATS6

Pause before blind dialling

ATS7

Set number of seconds to wait for connection completion

ATS8

Set number of seconds to wait for comma dial modifier encountered in

dial string of D command

ATS10

Set disconnect delay after indicating the absence of data carrier

ATT

Select tone dialing

ATV

TA response format

ATX

Set connect result code format and monitor call progress

ATZ

Reset default configuration

AT&C

Set DCD function mode

AT&D

Set DTR function mode

SIM800 Series_AT Command Manual_V1.02

23

2013-10-23

Smart Machine Smart Decision

AT&F

Factory defined configuration

AT&V

Display current configuration

AT&W

Store active profile

AT+GCAP

Request complete TA capabilities list

AT+GMI

Request manufacturer identification

AT+GMM

Request TA model identification

AT+GMR

Request TA revision identification of software release

AT+GOI

Request global object identification

AT+GSN

Request TA serial number identification (IMEI)

AT+ICF

Set TE-TA control character framing

AT+IFC

Set TE-TA local data flow control

AT+IPR

Set TE-TA fixed local rate

AT+HVOIC

Disconnect voice call only

2.2 Detailed Description of AT Commands According to V.25TER

2.2.1 A/
A/

Re-issues the Last Command Given

Re-issues the Last Command Given

Execution
Command
A/

Response
Re-issues the previous Command

Reference
V.25ter

Note

2.2.2 ATA Answer an Incoming Call

ATA Answer an Incoming Call
Execution
Command
ATA

Response
TA sends off-hook to the remote station.
Note1: Any additional commands on the same Command line are ignored.
Note2: This Command may be aborted generally by receiving a character
during execution. The aborting is not possible during some states of
connection establishment such as handshaking.
Response in case of data call, if successfully connected
CONNECT<text> TA switches to data mode.
Note: <text> output only if ATX<value> parameter setting with the
<value>>0
When TA returns to Command mode after call release
OK
Response in case of voice call, if successfully connected

SIM800 Series_AT Command Manual_V1.02

24

2013-10-23

Smart Machine Smart Decision

OK
Response if no connection
NO CARRIER
Parameter Saving NO_SAVE
Mode
Max
Time

Response 20s(voice call)

Timeout set with ATS7 (data call)

Reference
V.25ter
2.2.3 ATD
ATD

Note
See also ATX
Mobile Originated Call to Dial A Number

Mobile Originated Call to Dial A Number

Execution
Command
ATD<n>[<mgsm
][;]

Response
This Command can be used to set up outgoing voice, data or fax calls. It
also serves to control supplementary services.
Note: This Command may be aborted generally by receiving an ATH
Command or a character during execution. The aborting is not possible
during some states of connection establishment such as handshaking.
If error is related to ME functionality
+CME ERROR: <err>
If no dial tone and (parameter setting ATX2 or ATX4)
NO DIALTONE
If busy and (parameter setting ATX3 or ATX4)
BUSY
If a connection cannot be established
NO CARRIER
If the remote station does not answer
NO ANSWER
If connection successful and non-voice call.
CONNECT<text> TA switches to data mode.
Note: <text> output only if ATX<value> parameter setting with the
<value> >0
When TA returns to Command mode after call release
OK

SIM800 Series_AT Command Manual_V1.02

25

2013-10-23

Smart Machine Smart Decision

If connection successful and voice call

OK
Parameters
<n>
String of dialing digits and optionally V.25ter modifiers dialing
digits:
0-9, * , #, +, A, B, C
Following V.25ter modifiers are ignored:
,(comma), T, P, !, W, @
Emergency call:
<n>
Standardized emergency number 112 (no SIM needed)
<mgsm>
String of GSM modifiers:
I
Actives CLIR (Disables presentation of own number to
called party)
i
Deactivates CLIR (Enable presentation of own number
to called party)
G Activates Closed User Group invocation for this call
only
g
Deactivates Closed User Group invocation for this call
only
<;>
Only required to set up voice call , return to Command state
Parameter Saving NO_SAVE
Mode
Max
Time

Response 20s(voice call)

Timeout set with ATS7 (data call)

Reference
V.25ter

Note
Parameter "I" and "i" only if no *# code is within the dial string
<n> is default for last number that can be dialed by ATDL
*# codes sent with ATD are treated as voice calls. Therefore, the Command
must be terminated with a semicolon ";"
See ATX Command for setting result code and call monitoring parameters.
Responses returned after dialing with ATD
For voice call two different responses mode can be determined. TA returns
"OK" immediately either after dialing was completed or after the call is
established. The setting is controlled by AT+COLP. Factory default is
AT+COLP=0, this cause the TA returns "OK" immediately after dialing
was completed, otherwise TA will returns "OK", "BUSY", "NO DIAL
TONE", "NO CARRIER".
Using ATD during an active voice call:
When a user originates a second voice call while there is already an active

SIM800 Series_AT Command Manual_V1.02

26

2013-10-23

Smart Machine Smart Decision

voice call, the first call will be automatically put on hold.

The current states of all calls can be easily checked at any time by using the
AT+CLCC Command.

2.2.4 ATD><n>
ATD><n>

Originate Call to Phone Number in Current Memory

Originate Call to Phone Number in Current Memory

Execution
Command
ATD><n>[<clir>
][ <cug>][;]

Response
This Command can be used to dial a phone number from current phonebook
memory.
Note: This Command may be aborted generally by receiving an ATH
Command or a character during execution. The aborting is not possible
during some states of connection establishment such as handshaking.
If error is related to ME functionality
+CME ERROR: <err>
If no dial tone and (parameter setting ATX2 or ATX4)
NO DIALTONE
If busy and (parameter setting ATX3 or ATX4)
BUSY
If a connection cannot be established
NO CARRIER
If the remote station does not answer
NO ANSWER
If connection successful and non-voice call.
CONNECT<text> TA switches to data mode.
Note: <text> output only if ATX<value> parameter setting with the
<value> >0
When TA returns to Command mode after call release
OK
If successfully connected and voice call
OK
Parameters
<n> Integer type memory location should be in the range of locations
available in the memory used
<mgsm>
String of GSM modifiers:

SIM800 Series_AT Command Manual_V1.02

27

2013-10-23

Smart Machine Smart Decision

<clir>
I
Override the CLIR supplementary service subscription
default value for this call
Invocation (restrict CLI presentation)
i
Override the CLIR supplementary service subscription
default value for this call
Suppression (allow CLI presentation)
<cug>
G Control the CUG supplementary service information
for this call
CUG Not supported
g
Control the CUG supplementary service information
for this call
CUG Not supported
<;>
Only required to set up voice call , return to
Command state
Parameter Saving NO_SAVE
Mode
Max
Time

Response -

Reference
V.25ter

Note
Parameter "I" and "i" only if no *# code is within the dial string
*# codes sent with ATD are treated as voice calls. Therefore, the Command
must be terminated with a semicolon ";"
See ATX Command for setting result code and call monitoring parameters.

2.2.5 ATD><str>
Field <str>
ATD><str>
<str>

Originate Call to Phone Number in Memory Which Corresponds to

Originate Call to Phone Number in Memory Which Corresponds to Field

Execution
Command
ATD><str>[<clir
>][<cug>][;]

Response
This Command make the TA attempts to set up an outgoing call to stored
number.
All available memories are searched for the entry <str>.
Note: This Command may be aborted generally by receiving an ATH
Command or a character during execution. The aborting is not possible
during some states of connection establishment such as handshaking.
If error is related to ME functionality
+CME ERROR: <err>
If no dial tone and (parameter setting ATX2 or ATX4)
NO DIALTONE

SIM800 Series_AT Command Manual_V1.02

28

2013-10-23

Smart Machine Smart Decision

If busy and (parameter setting ATX3 or ATX4)

BUSY
If a connection cannot be established
NO CARRIER
If the remote station does not answer
NO ANSWER
If connection successful and non-voice call.
CONNECT<text> TA switches to data mode.
Note: <text> output only if ATX<value> parameter setting with the
<value> >0
When TA returns to Command mode after call release
OK
If successfully connected and voice call
OK
Parameters
<str>
String type (string should be included in quotation marks) value
("x"), which should equal to an alphanumeric field in at least one phone
book entry in the searched memories. str formatted as current TE character
set specified by +CSCS.
<mgsm>
String of GSM modifiers:
I Actives CLIR (Disables presentation of own number to
called party)
i Deactivates CLIR (Enable presentation of own number
to called party)
G Activates Closed User Group invocation for this call
only
g
Deactivates Closed User Group invocation for this call
only
<;>
Only required to set up voice call, return to Command state
Parameter Saving NO_SAVE
Mode
Max
Time

Response -

Reference
V.25ter

Note
Parameter "I" and "i" only if no "*#" code is within the dial string
*# codes sent with ATD are treated as voice calls. Therefore, the Command
must be terminated with a semicolon ";"

SIM800 Series_AT Command Manual_V1.02

29

2013-10-23

Smart Machine Smart Decision

See ATX Command for setting result code and call monitoring parameters.
2.2.6 ATDL Redial Last Telephone Number Used
ATDL Redial Last Telephone Number Used
Execution
Command
ATDL

Response
This Command redials the last voice and data call number used.
Note: This Command may be aborted generally by receiving an ATH
Command or a character during execution. The aborting is not possible
during some states of connection establishment such as handshaking.
If error is related to ME functionality
+CME ERROR: <err>
If no dial tone and (parameter setting ATX2 or ATX4)
NO DIALTONE
If busy and (parameter setting ATX3 or ATX4)
BUSY
If a connection cannot be established
NO CARRIER
If the remote station does not answer
NO ANSWER
If connection successful and non-voice call.
CONNECT<text> TA switches to data mode.
Note: <text> output only if ATX<value> parameter setting with the
<value> >0
When TA returns to Command mode after call release
OK
If successfully connected and voice call
OK

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference
V.25ter

Note
See ATX Command for setting result code and call monitoring parameters.
Return the numbers and symbols which ATD supports if there is no last

SIM800 Series_AT Command Manual_V1.02

30

2013-10-23

Smart Machine Smart Decision

dialing context.
2.2.7 ATE
ATE

Set Command Echo Mode

Set Command Echo Mode

Execution
Command
ATE<value>

Response
This setting determines whether or not the TA echoes characters received
from TE during Command state.
OK
Parameter
<value>

0 Echo mode off

1 Echo mode on

Parameter Saving AT&W_SAVE

Mode
Max
Time

Response -

Reference
V.25ter
2.2.8 ATH
ATH

Note

Disconnect Existing Connection

Disconnect Existing Connection

Execution
Command
ATH

Response
Disconnect existing call by local TE from Command line and terminate call
OK
Note: OK is issued after circuit 109(DCD) is turned off, if it was previously
on.

Parameter Saving NO_SAVE

Mode
Max
Time

Response 20s

Reference
V.25ter
2.2.9 ATI
ATI

Note

Display Product Identification Information

Display Product Identification Information

Execution
Command
ATI

Response
TA issues product information text
Example:
SIM800 R11.08

SIM800 Series_AT Command Manual_V1.02

31

2013-10-23

Smart Machine Smart Decision

OK
Parameter Saving NO_SAVE
Mode
Max
Time

Response -

Reference
V.25ter

Note

2.2.10 ATL Set Monitor speaker loudness

ATL Set Monitor speaker loudness
Execution
Command
ATL<value>

Response
OK
Parameter
<value>

0..9

Volume

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference
V.25ter

Note
No effect in GSM

2.2.11 ATM Set Monitor Speaker Mode

ATM

Set Monitor Speaker Mode

Execution
Command
ATM<value>

Response
OK
Parameter
<value>

0..9

Mode

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference
V.25ter

Note
No effect in GSM

2.2.12 +++ Switch from Data Mode or PPP Online Mode to Command Mode
+++

Switch from Data Mode or PPP Online Mode to Command Mode

Execution
Command
+++

Response
The +++ character sequence causes the TA to cancel the data flow over the
AT interface and switch to Command mode. This allows you to enter AT
Command while maintaining the data connection to the remote server.

SIM800 Series_AT Command Manual_V1.02

32

2013-10-23

Smart Machine Smart Decision

OK
To prevent the +++ escape sequence from being misinterpreted as data, it
should comply to following sequence:
No characters entered for T1 time (1 second)
"+++" characters entered with no characters in between (1 second)
No characters entered for T1 timer (1 second)
Switch to Command mode, otherwise go to step 1.
Parameter Saving NO_SAVE
Mode
Max
Time

Response -

Reference
V.25ter

Note
To return from Command mode back to data mode: Enter ATO.

2.2.13 ATO Switch from Command Mode to Data Mode

ATO

Switch from Command Mode to Data Mode

Execution
Command
ATO[n]

Response
TA resumes the connection and switches back from Command mode to data
mode.
CONNECT
If connection is not successfully resumed
ERROR
else
TA returns to data mode from command mode CONNECT <text>
Note: <text> only if parameter setting ATX>0
Parameter
<n>
0

Switch from command mode to data mode.

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference
V.25ter

Note

2.2.14 ATP Select Pulse Dialling

ATP Select Pulse Dialling

SIM800 Series_AT Command Manual_V1.02

33

2013-10-23

Smart Machine Smart Decision

Execution
Command
ATP

Response
OK

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference
V.25ter

Note
No effect in GSM

2.2.15 ATQ Set Result Code Presentation Mode

ATQ

Set Result Code Presentation Mode

Execution
Command
ATQ<n>

Response
This parameter setting determines whether or not the TA transmits any result
code to the TE. Information text transmitted in response is not affected by
this setting.
If <n>=0:
OK
If <n>=1:
(none)
Parameter
<n>
0 TA transmits result code
1 Result codes are suppressed and not transmitted

Parameter Saving AT&W_SAVE

Mode
Max
Time

Response -

Reference
V.25ter

Note

2.2.16 ATS0 Set Number of Rings before Automatically Answering the Call
ATS0

Set Number of Rings before Automatically Answering the Call

Read Command
ATS0?

Response
<n>
OK
Parameter
See Write Command

Write Command
ATS0=<n>

Response
This parameter setting determines the number of rings before auto-answer.
OK

SIM800 Series_AT Command Manual_V1.02

34

2013-10-23

Smart Machine Smart Decision

ERROR
Parameter
<n>
0
Automatic answering is disable.
1-255 Number of rings the modem will wait for before answering
the phone if a ring is detected.
Parameter Saving AT&W_SAVE
Mode
Max
Time

Response -

Reference
V.25ter

Note
If <n> is set too high, the calling party may hang up before the call can be
answered automatically.

2.2.17 ATS3 Set Command Line Termination Character

ATS3

Set Command Line Termination Character

Read Command
ATS3?

Response
<n>
OK
Parameter
See Write Command

Write Command
ATS3=<n>

Response
This parameter setting determines the character recognized by TA to
terminate an incoming Command line. The TA also returns this character in
output.
OK
ERROR
Parameter
<n>
13 Command line termination character

Parameter Saving AT&W_SAVE

Mode
Max
Time

Response -

Reference
V.25ter
2.2.18 ATS4
ATS4

Note
Default 13 = CR. It only supports default value.
Set Response Formatting Character

Set Response Formatting Character

Read Command

Response

SIM800 Series_AT Command Manual_V1.02

35

2013-10-23

Smart Machine Smart Decision

ATS4?

<n>
OK
Parameter
See Write Command

Write Command
ATS4=<n>

Response
This parameter setting determines the character generated by the TA for
result code and information text.
OK
ERROR
Parameter
<n>
10 Response formatting character

Parameter Saving AT&W_SAVE

Mode
Max
Time

Response -

Reference
V.25ter
2.2.19 ATS5
ATS5

Note
Default 10 = LF. It only supports default value.
Set Command Line Editing Character

Set Command Line Editing Character

Read Command
ATS5?

Response
<n>
OK
Parameter
See Write Command

Write Command
ATS5=<n>

Response
This parameter setting determines the character recognized by TA as a
request to delete from the Command line the immediately preceding
character.
OK
ERROR
Parameter
<n>
0-8-127

Response formatting character

Parameter Saving AT&W_SAVE

Mode
Max

Response -

SIM800 Series_AT Command Manual_V1.02

36

2013-10-23

Smart Machine Smart Decision

Time
Reference
V.25ter
2.2.20 ATS6
ATS6

Note
Default 8 = Backspace.
Pause Before Blind Dialling

Pause Before Blind Dialling

Read Command
ATS6?

Response
<n>
OK

Write Command
ATS6=<n>

Response
OK
ERROR
Parameter
<n>
0..999

Time

Parameter Saving AT&W_SAVE

Mode
Max
Time

Response -

Reference
V.25ter

Note
No effect in GSM

2.2.21 ATS7 Set Number of Seconds to Wait for Connection Completion

ATS7

Set Number of Seconds to Wait for Connection Completion

Read Command
ATS7?

Response
<n>
OK
Parameter
See Write Command

Write Command
ATS7=<n>

Response
This parameter setting determines the amount of time to wait for the
connection completion in case of answering or originating a call.
OK
ERROR
Parameter
<n>
1-60-255

Number of seconds to wait for connection completion

Parameter Saving AT&W_SAVE

Mode

SIM800 Series_AT Command Manual_V1.02

37

2013-10-23

Smart Machine Smart Decision

Max
Time

Response -

Reference
V.25ter

Note
If called party has specified a high value for ATS0=<n>, call setup may fail.
The correlation between ATS7 and ATS0 is important
Example: Call may fail if ATS7=30 and ATS0=20.
ATS7 is only applicable to data call.

2.2.22 ATS8 Set Number of Seconds to Wait for Comma Dial Modifier Encountered in
Dial String of D Command
ATS8 Set Number of Seconds to Wait for Comma Dial Modifier Encountered in Dial
String of D Command
Read Command
ATS8?

Response
<n>
OK
Parameter
See Write Command

Write Command
ATS8=<n>

Response
OK
ERROR
Parameter
<n>
0-255 The value of this register determines how long the modem
should pause when it sees a comma in the dialing string.

Parameter Saving AT&W_SAVE

Mode
Max
Time

Response -

Reference
V.25ter
2.2.23 ATS10
ATS10

Note
No effect in GSM
Set Disconnect Delay after Indicating the Absence of Data Carrier

Set Disconnect Delay after Indicating the Absence of Data Carrier

Read Command
ATS10?

Response
<n>
OK
Parameter
See Write Command

Write Command
ATS10=<n>

Response
This parameter setting determines the amount of time that the TA will

SIM800 Series_AT Command Manual_V1.02

38

2013-10-23

Smart Machine Smart Decision

remain connected in absence of data carrier. If the data carrier is once more
detected before disconnecting, the TA remains connected.
OK
ERROR
Parameter
<n>
1-15-254

Number of tenths seconds of delay

Parameter Saving AT&W_SAVE

Mode
Max
Time

Response -

Reference
V.25ter

Note

2.2.24 ATT Select Tone Dialing

ATT Select Tone Dialing
Execution
Command
ATT

Response
OK

Parameter Saving AUTO_SAVE

Mode
Max
Time

Response -

Reference
V.25ter
2.2.25 ATV

Note

TA Response Format

ATV TA Response Format

Execution
Command
ATV<value>

Response
This parameter setting determines the contents of the header and trailer
transmitted with result codes and information responses.
When <value>=0
0
When <value>=1
OK
Parameter
<value>

Information response: <text><CR><LF>

Short result code format: <numeric code><CR>
1 Information response: <CR><LF><text><CR><LF>
Long result code format: <CR><LF><verbose code>
<CR><LF>

SIM800 Series_AT Command Manual_V1.02

39

2013-10-23

Smart Machine Smart Decision

The result codes, their numeric equivalents and brief descriptions of the use
of each are listed in the following table.
Parameter Saving AT&W_SAVE
Mode
Max
Time

Response -

Reference
V.25ter

Note

ATV1

ATV0

Description

OK

Acknowledges execution of a Command

CONNECT

A connection has been established; the DCE is moving from

Command state to online data state

RING

The DCE has detected an incoming call signal from

network

NO CARRIER

The connection has been terminated or the attempt to

establish a connection failed

ERROR

Command not recognized, Command line maximum length

exceeded, parameter value invalid, or other problem with
processing the Command line

NO DIALTONE

No dial tone detected

BUSY

Engaged (busy) signal detected

NO ANSWER

"@" (Wait for Quiet Answer) dial modifier was used, but
remote ringing followed by five seconds of silence was not
detected before expiration of the connection timer (S7)

PROCEEDING

An AT command is being processed

CONNECT
<text>

Manufacturerspecific

Same as CONNECT, but includes manufacturer-specific

text that may specify DTE speed, line speed, error control,
data compression, or other status

2.2.26 ATX
ATX

Set CONNECT Result Code Format and Monitor Call Progress

Set CONNECT Result Code Format and Monitor Call Progress

Execution
Command
ATX<value>

Response
This parameter setting determines whether or not the TA detected the
presence of dial tone and busy signal and whether or not TA transmits
particular result codes.
OK
ERROR
Parameter
<value>

CONNECT result code only returned, dial tone and busy

SIM800 Series_AT Command Manual_V1.02

40

2013-10-23

Smart Machine Smart Decision

detection are both disabled.

1 CONNECT<text> result code only returned, dial tone and
busy detection are both disabled.
2 CONNECT<text> result code returned, dial tone
detection is enabled, busy detection is disabled.
3 CONNECT<text> result code returned, dial tone
detection is disabled, busy detection is enabled.
4 CONNECT<text> result code returned, dial tone and
busy detection are both enabled.
Parameter Saving AT&W_SAVE
Mode
Max
Time

Response -

Reference
V.25ter
2.2.27 ATZ

Note

Reset Default Configuration

ATZ Reset Default Configuration

Execution
Command
ATZ[<value>]

Response
TA sets all current parameters to the user defined profile.
OK
ERROR
Parameter
<value>

Restore profile 0

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference
V.25ter

Note

Parameter impacted by Z command: refer to AT&W

2.2.28 AT&C
AT&C

Set DCD Function Mode

Set DCD Function Mode

Execution
Command
AT&C

Response
This parameter determines how the state of circuit 109 (DCD) relates to the
detection of received line signal from the distant end.
OK
ERROR

SIM800 Series_AT Command Manual_V1.02

41

2013-10-23

Smart Machine Smart Decision

Parameter
<value>

0 DCD line is always ON

1 DCD line is ON only in the presence of data carrier

Parameter Saving AT&W_SAVE

Mode
Max
Time

Response -

Reference
V.25ter
2.2.29 AT&D
AT&D

Note

Set DTR Function Mode

Set DTR Function Mode

Execution
Command
AT&D[<value>]

Response
This parameter determines how the TA responds when circuit 108/2 (DTR)
is changed from the ON to the OFF condition during data mode.
OK
ERROR
Parameter
<value>

0 TA ignores status on DTR.

1 ON->OFF on DTR: Change to Command mode with
remaining the connected call.
2 ON->OFF on DTR: Disconnect call, change to Command
mode. During state DTR = OFF is auto-answer off.

Parameter Saving AT&W_SAVE

Mode
Max
Time

Response -

Reference
V.25ter

Note

2.2.30 AT&F Factory Defined Configuration

AT&F Factory Defined Configuration
Execution
Command
AT&F[<value>]

Response
TA sets all current parameters to the manufacturer defined profile.
OK
Parameter
<value>

Set all TA parameters to manufacturer defaults.

Parameter Saving NO_SAVE

Mode
Max

Response -

SIM800 Series_AT Command Manual_V1.02

42

2013-10-23

Smart Machine Smart Decision

Time
Reference
V.25ter

Note

Parameter impacted by &F command: refer to AT&W

2.2.31 AT&V Display Current Configuration
AT&V Display Current Configuration
Execution
Command
AT&V[<n>]

Response
TA returns the current parameter setting.
<current configurations text>
OK
ERROR
Parameter
<n>
0 Responses in numeric format

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference
V.25ter

Note

2.2.32 AT&W Store Active Profile

AT&W Store Active Profile
Execution
Command
AT&W[<n>]

Response
TA stores the current parameter setting in the user defined profile.
OK
ERROR
Parameter
<n>

Store the current configuration in profile 0

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference
V.25ter

Note
The user defined profile is stored in non volatile memory.

Parameter stored by &W

Command

Parameter name

SIM800 Series_AT Command Manual_V1.02

Displayedby &V

43

2013-10-23

Smart Machine Smart Decision

ATS0

<num>

ATS3

<char>

ATS4

<char>

ATS5

<char>

ATS6

<short>

ATS7

<time>

ATS8

<time>

ATS10

<time>

AT+CBST

<speed>,<name>,<ce>

AT+CRLP

<iws>,<mws>,<T1>,<N2>

ATV

<format>

ATE

<echo>

ATQ

<result>

ATX

<result>

AT&C

<behavior>

AT&D

<behavior>

AT+CLTS

<timestamp>

AT+CREG

<n>

AT+CGREG

<n>

AT+CMEE

<n>

AT+CSCLK

<n>

AT+CIURC

<mode>

AT+CFGRI

<mode>

AT+CMTE

<mode>

AT+CANT

<mode>,<UrcEnable>,<timer>

AT+STKPCIS

<switch>

AT+CMGF

<mode>

AT+CNMI

<mode>,<mt>,<bm>,<ds>,<bfr>

AT+CSCS

<chest>

AT+VTD

<n>

AT+CALS

<n>

AT+CHF

<ind>

AT+CAAS

<mode>

AT+CBUZZERRING

<mode>

AT+DDET

<n>

AT+MORING

<mode>

AT+SVR

<voice_rate_coding>

AT+CCPD

<mode>

SIM800 Series_AT Command Manual_V1.02

44

2013-10-23

Smart Machine Smart Decision

AT+CSGS

<mode>

AT+CNETLIGHT

<mode>

AT+SLEDS

<mode>,<timer_on>,<timer_off>

AT+CSDT

<mode>

AT+CSMINS

<n>

AT+EXUNSOL

<exunsol>

AT+IPR

<n>

AT+IFC

<TA_by_TE>, <TE_by_TA>

AT+ICF

<format>,<parity>

AT+FCLASS

<mode>

NOTE:
AT+CSMINS and AT+CSDT is available when simcard supports hot plug function.
AT+FCLASS is available only in project SIM800V
AT+CANT is available only in project SIM800H
2.2.33 AT+GCAP Request Complete TA Capabilities List
AT+GCAP Request Complete TA Capabilities List
Execution
Command
AT+GCAP

Response
TA reports a list of additional capabilities.
+GCAP: list of supported <name>s
OK
Parameter
<name>

+CGSM GSM function is supported

+FCLASS FAX function is supported

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference
V.25ter

Note

2.2.34 AT+GMI
AT+GMI

Request Manufacturer Identification

Request Manufacturer Identification

Test Command
AT+GMI=?

Response
OK
Parameter

SIM800 Series_AT Command Manual_V1.02

45

2013-10-23

Smart Machine Smart Decision

Execution
Command
AT+GMI

TA reports one or more lines of information text which permit the user to
identify the manufacturer.
SIMCOM_Ltd
OK

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference
V.25ter

Note

2.2.35 AT+GMM
AT+GMM

Request TA Model Identification

Request TA Model Identification

Test Command
AT+GMM=?

Response
OK

Execution
Command
AT+GMM

TA reports one or more lines of information text which permit the user to
identify the specific model of device.
<model>
OK
Parameter
<model>

Product model identification text

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference
V.25ter

Note

2.2.36 AT+GMR
AT+GMR

Request TA Revision Identification of Software Release

Request TA Revision Identification of Software Release

Test Command
AT+GMR=?

Response
OK

Execution
Command
AT+GMR

TA reports one or more lines of information text which permit the user to
identify the revision of software release.
Revision: <revision>

SIM800 Series_AT Command Manual_V1.02

46

2013-10-23

Smart Machine Smart Decision

OK
Parameter
<revision>

Revision of software release

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference
V.25ter

Note

2.2.37 AT+GOI
AT+GOI

Request Global Object Identification

Request Global Object Identification

Test Command
AT+GOI=?

Response
OK

Execution
Command
AT+GOI

Response
TA reports one or more lines of information text which permit the user to
identify the device, based on the ISO system for registering unique object
identifiers.
<Object Id>
OK
Parameter
<Object Id>

Identifier of device type

see X.208, 209 for the format of <Object Id>

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference
V.25ter

Note

2.2.38 AT+GSN
AT+GSN

Request TA Serial Number Identification (IMEI)

Request TA Serial Number Identification(IMEI)

Test Command
AT+GSN=?

Response
OK

Execution
Command
AT+GSN

Response
TA reports the IMEI (international mobile equipment identifier) number in
information text which permit the user to identify the individual ME device.
<sn>

SIM800 Series_AT Command Manual_V1.02

47

2013-10-23

Smart Machine Smart Decision

OK
Parameter
<sn>
IMEI of the telephone(International Mobile station Equipment
Identity)
Parameter Saving NO_SAVE
Mode
Max
Time

Response -

Reference
V.25ter

Note
The serial number (IMEI) is varied by individual ME device.

2.2.39 AT+ICF Set TE-TA Control Character Framing

AT+ICF Set TE-TA Control Character Framing
Test Command
AT+ICF=?

Response
+ICF: (list of supported <format>s),(list of supported <parity>s)
OK
Parameters
See Write Command

Read Command
AT+ICF?

Response
+ICF: <format>,<parity>
OK
Parameters
See Write Command

Write Command Response

AT+ICF=<forma This parameter setting determines the serial interface character framing
format and parity received by TA from TE.
t>[,<parity>]
OK
Parameters
<format>

<parity>

1
2
3
4
5
6
0
1
3

8 data 0 parity 2 stop

8 data 1 parity 1 stop
8 data 0 parity 1 stop
7 data 0 parity 2 stop
7 data 1 parity 1 stop
7 data 0 parity 1 stop
odd
even
space (0)

Parameter Saving AT&W_SAVE

SIM800 Series_AT Command Manual_V1.02

48

2013-10-23

Smart Machine Smart Decision

Mode
Max
Time

Response -

Reference
V.25ter

Note
The Command is applied for Command state;
In <format> parameter, "0 parity" means no parity;
The <parity> field is ignored if the <format> field specifies no parity and
string "+ICF: <format>,255" will be response to AT+ICF? Command.

2.2.40 AT+IFC
AT+IFC

Set TE-TA Local Data Flow Control

Set TE-TA Local Data Flow Control

Test Command
AT+IFC=?

Response
+IFC: (list of
<dte_by_dce>s)

supported

<dce_by_dte>s),(list

of

supported

OK
Parameters
See Write Command
Read Command
AT+IFC?

Response
+IFC: <dce_by_dte>,<dte_by_dce>
OK
Parameters
See Write Command

Write Command
AT+IFC=<dce_b
y_dte>[,<dte_by
_dce>]

Response
This parameter setting determines the data flow control on the serial
interface for data mode.
OK
Parameters
<dce_by_dte>
data from TA

Specifies the method will be used by TE at receive of

0 No flow control
1 Software flow control
2 Hardware flow control
<dte_by_dce>Specifies the method will be used by TA at receive of data
from TE
0 No flow control
1 Software flow control
2 Hardware flow control
Parameter Saving AT&W_SAVE
Mode

SIM800 Series_AT Command Manual_V1.02

49

2013-10-23

Smart Machine Smart Decision

Max
Time

Response -

Reference
V.25ter

Note

2.2.41 AT+IPR
AT+IPR

Set TE-TA Fixed Local Rate

Set TE-TA Fixed Local Rate

Test Command
AT+IPR=?

Response
+IPR: (list of supported auto detectable <rate>s),(list of supported
fixed-only <rate>s)
OK
Parameter
See Write Command

Read Command
AT+IPR?

Response
+IPR: <rate>
OK
Parameter
See Write Command

Write Command
AT+IPR=<rate>

Response
This parameter setting determines the data rate of the TA on the serial
interface. The rate of Command takes effect following the issuance of any
result code associated with the current Command line.
OK
Parameter
<rate>
Baud rate per second
0 (Auto-bauding)
1200
2400
4800
9600
19200
38400
57600
115200

Parameter Saving AT&W_SAVE

Mode
Max
Time

Response -

Reference
V.25ter

Note
Factory setting is AT+IPR=0auto-bauding.

SIM800 Series_AT Command Manual_V1.02

50

2013-10-23

Smart Machine Smart Decision

2.2.41.1 Auto-bauding
Synchronization between DTE and DCE ensure that DTE and DCE are correctly synchronized and
the baud rate used by the DTE is detected by the DCE (= ME). To allow the baud rate to be
synchronized, simply issue an "AT" string. This is necessary when you start up the module while
auto-bauding is enabled. It is recommended to wait 3 to 5 seconds before sending the first AT
character. Otherwise undefined characters might be returned.
If you want to use auto-bauding and auto-answer at the same time, you can easily enable the
DTE-DCE synchronization, when you activate auto-bauding first and then configure the
auto-answer mode.
Restrictions on auto-bauding operation
The serial interface has to be operated at 8 data bits, no parity and 1 stop bit (factory setting).
Only the strings "AT" or "at" can be detected when auto-bauding is enabled.
AT+IPR=0 setting to auto-bauding will take effect after module resets.
Unsolicited Result Codes that may be issued before the ME detects the new baud rate (by
receiving the first AT Command string) will be sent at the previously detected baud rate.The
Unsolicited Result Codes "RDY" and so on are not indicated when you start up the ME while
auto-bauding is enabled.
It is not recommended to switch to auto-bauding from a baud rate that cannot be detected by the
auto-bauding mechanism (e.g. 300 baud). Responses to +IPR=0 and any commands on the same
line might be corrupted.
Auto-bauding and baud rate after restart
The most recently detected baud rate can not be stored when module is powered down.
2.2.42 AT+HVOIC
AT+HVOIC
Execution
Command
AT+HVOIC

Disconnect Voice Call Only

Disconnect Voice Call Only

Response
Disconnect existing voice call by local TE from Command line and
terminate call with existing PPP or CSD connection on.
OK

Parameter Saving NO_SAVE

Mode
Max
Time

Response 20s

Reference
V.25ter

Note

SIM800 Series_AT Command Manual_V1.02

51

2013-10-23

Smart Machine Smart Decision

3 AT Commands According to 3GPP TS 27.007

3.1 Overview of AT Command According to 3GPP TS 27.007
Command

Description

AT+CACM

Accumulated call meter(ACM) reset or query

AT+CAMM

Accumulated call meter maximum(ACM max) set or query

AT+CAOC

Advice of charge

AT+CBST

Select bearer service type

AT+CCFC

Call forwarding number and conditions control

AT+CCWA

Call waiting control

AT+CEER

Extended error report

AT+CGMI

Request manufacturer identification

AT+CGMM

Request model identification

AT+CGMR

Request TA revision identification of software release

AT+CGSN

Request product serial number identification (identical with +GSN)

AT+CSCS

Select TE character set

AT+CSTA

Select type of address

AT+CHLD

Call hold and multiparty

AT+CIMI

Request international mobile subscriber identity

AT+CLCC

List current calls of ME

AT+CLCK

Facility lock

AT+CLIP

Calling line identification presentation

AT+CLIR

Calling line identification restriction

AT+CMEE

Report mobile equipment error

AT+COLP

Connected line identification presentation

AT+COPS

Operator selection

AT+CPAS

Phone activity status

AT+CPBF

Find phonebook entries

AT+CPBR

Read current phonebook entries

AT+CPBS

Select phonebook memory storage

AT+CPBW

Write phonebook entry

AT+CPIN

Enter PIN

AT+CPWD

Change password

AT+CR

Service reporting control

AT+CRC

Set cellular result codes for incoming call indication

AT+CREG

Network registration

AT+CRLP

Select radio link protocol parameters

SIM800 Series_AT Command Manual_V1.02

52

2013-10-23

Smart Machine Smart Decision

AT+CRSM

Restricted SIM access

AT+CSQ

Signal quality report

AT+FCLASS

Fax: select, read or test service class

AT+FMI

Fax: report manufactured id

AT+FMM

Fax: report model id

AT+FMR

Fax: report revision id

AT+VTD

Tone duration

AT+VTS

DTMF and tone generation

AT+CMUX

Multiplexer control

AT+CNUM

Subscriber number

AT+CPOL

Preferred operator list

AT+COPN

Read operator names

AT+CFUN

Set phone functionality

AT+CCLK

Clock

AT+CSIM

Generic SIM access

AT+CALM

Alert sound mode

AT+CALS

Alert sound select

AT+CRSL

Ringer sound level

AT+CLVL

Loud speaker volume level

AT+CMUT

Mute control

AT+CPUC

Price per unit and currency table

AT+CCWE

Call meter maximum event

AT+CBC

Battery charge

AT+CUSD

Unstructured supplementary service data

AT+CSSN

Supplementary services notification

3.2 Detailed Descriptions of AT Command According to 3GPP TS 27.007

3.2.1 AT+CACM
AT+CACM

Accumulated Call Meter (ACM) Reset or Query

Accumulated Call Meter(ACM) Reset or Query

Test Command
AT+CACM=?

Response
OK

Read Command
AT+CACM?

Response
TA returns the current value of ACM.
+CACM: <acm>
OK
If error is related to ME functionality:
+CME ERROR: <err>

SIM800 Series_AT Command Manual_V1.02

53

2013-10-23

Smart Machine Smart Decision

Parameter
<acm>
String type (string should be included in quotation marks);
three bytes of the current ACM value in hexa-decimal format (e.g.
"00001E" indicates decimal value 30)
000000 FFFFFF
Write Command
AT+CACM=<pa
sswd>

Response
TA resets the Advice of Charge related accumulated call meter (ACM)
value in SIM file EF (ACM). ACM contains the total number of home
units for both the current and preceding calls.
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<passwd>

Parameter Saving
Mode

NO_SAVE

Max
Time

Response

Reference
3GPP TS 27.007
[13]
3.2.2 AT+CAMM
AT+CAMM

String type (string should be included in quotation marks):

SIM PIN2

Note

Accumulated Call Meter Maximum (ACM max) Set or Query

Accumulated Call Meter Maximum(ACM max) Set or Query

Test Command
AT+CAMM=?

Response
OK

Read Command
AT+CAMM?

Response
TA returns the current value of ACM max.
+CAMM: <acmmax>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
See Write Command

Write Command
AT+CAMM=<ac
mmax>[,<passwd
>]

Response
TA sets the Advice of Charge related accumulated call meter maximum
value in SIM file EF (ACM max). ACM max contains the maximum
number of home units allowed to be consumed by the subscriber.
OK
ERROR

SIM800 Series_AT Command Manual_V1.02

54

2013-10-23

Smart Machine Smart Decision

If error is related to ME functionality:

+CME ERROR: <err>
Parameters
<acmmax>
String type (string should be included in quotation
marks); three bytes of the max. ACM value in hex-decimal format (e.g.
"00001E" indicates decimal value 30)
000000 disable ACMmax feature
000001-FFFFFF
<passwd>
String type (string should be included in quotation marks)
SIM PIN2
Parameter Saving
Mode

NO_SAVE

Max
Time

Response

Reference
3GPP TS 27.007
[13]
3.2.3 AT+CAOC
AT+CAOC

Note

Advice of Charge

Advice of Charge

Test Command
AT+CAOC=?

Response
+CAOC: (list of supported <mode>s)
OK
Parameters
See Write Command

Read Command
AT+CAOC?

Response
+CAOC: <mode>
OK
Parameters
See Write Command

Write Command
AT+CAOC=<mo
de>

Response
TA sets the Advice of Charge supplementary service function mode.
If <mode>=0, TA returns the current call meter value
+CAOC: <ccm>
OK
If <mode>=1, TA deactivates the unsolicited reporting of CCM value
OK
If <mode>=2, TA activates the unsolicited reporting of CCM value
OK

SIM800 Series_AT Command Manual_V1.02

55

2013-10-23

Smart Machine Smart Decision

ERROR
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<mode>

0 Query CCM value

1 Deactivate the unsolicited reporting of CCM value
2 Activate the unsolicited reporting of CCM value
<ccm>
String type (string should be included in quotation marks);
three bytes of the current CCM value in hex-decimal format (e.g.
"00001E" indicates decimal value 30); bytes are similarly coded as
ACMmax value in the SIM 000000-FFFFFF
Execution
Command
AT+CAOC

Response
+CAOC: <ccm>
OK

Parameter Saving
Mode

NO_SAVE

Max
Time

Response

Reference
3GPP TS 27.007
[13]

Note

3.2.4 AT+CBST Select Bearer Service Type

AT+CBST Select Bearer Service Type
Test Command
AT+CBST=?

Response
+CBST: (list of supported <speed>s),(list of supported <name>s),(list of
supported <ce>s)
OK
Parameters
See Write Command

Read Command
AT+CBST?

Response
+CBST: <speed>,<name>,<ce>
OK
Parameters
See Write Command

Write Command
AT+CBST=<spee
d>[,<name>[,<ce
>]]

Response
TA selects the bearer service <name> with data rate <speed>, and the
connection element <ce> to be used when data calls are originated.
OK

SIM800 Series_AT Command Manual_V1.02

56

2013-10-23

Smart Machine Smart Decision

ERROR
Parameters
<speed>
0
Auto-bauding (automatic selection of the speed; this
setting is possible in case of 3.1kHz modern and non-transparent service)
4 2400 bps (V.22bis)
5 2400 bps (V.26ter)
6 4800 bps (V.32)
7
9600 bps (V.32)
12 9600 bps (V.34)
14 14400 bps (V.34)
68 2400 bps (V.110 or X.31 flag stuffing)
70 4800 bps (V.110 or X.31 flag stuffing)
71 9600 bps (V.110 or X.31 flag stuffing)
75 14400 bps (V.110 or X.31 flag stuffing)
<name>
0
Data circuit asynchronous (UDI or 3.1 kHz modem)
4
Data circuit asynchronous (RDI)
<ce>

0
1
2
3

Parameter Saving
Mode

AT&W_SAVE

Max
Time

Response

Reference
3GPP TS 27.007
[14]
3.2.5 AT+CCFC
AT+CCFC

Transparent
Non-transparent
Both, transparent prefered
Both, non-transparent prefered

Note
GSM 02.02[1]: lists the allowed combinations of the sub parameters.

Call Forwarding Number and Conditions Control

Call Forwarding Number and Conditions Control

Test Command
AT+CCFC=?

Response
+CCFC: (list of supported <reason>s)
OK
Parameter
See Write Command

Write Command
AT+CCFC=<rea
son>,
<mode>[,<numb
er>
[,<type>
[,<class>[,<subad
dr>[,<satype>[,ti

Response
TA controls the call forwarding supplementary service. Registration,
erasure, activation, deactivation, and status query are supported.
Only ,<reads> and <mode> should be entered with mode (0-2,4)
If <mode>2 and Command successful
OK
If <mode>=2 and Command successful (only in connection with <reason> 0

SIM800 Series_AT Command Manual_V1.02

57

2013-10-23

Smart Machine Smart Decision

me]]]]]]

3)
For registered call forwarding numbers:
when <mode>=2 and command successful:
+CCFC: <status>,<class1>
[,<number>,<type>[,<subaddr>,<satype>[,<time>]]]
[<CR><LF>+CCFC: <status>,<class2>
[,<number>,<type>[,<subaddr>,<satype>[,<time>]]][]
OK
If no call forwarding numbers are registered (and therefore all classes are
inactive):
+CCFC: <status>, <class>
OK
where <status>=0 and <class>=7
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<reason>

0 Unconditional
1 Mobile busy
2 No reply
3 Not reachable
4 All call forwarding
5 All conditional call forwarding
<mode>
0 Disable
1 Enable
2 Query status
3 Registration
4 Erasure
<number>
String type (Phone number of forwarding address in format
specified by <type>)
<type>
Type of address
<subaddr> String type (subaddress of format specified by <satype>)
<satype>
Type of sub-address in integer
<class>
1 Voice (telephony)
2 Data (refers to all bearer services; with <mode>=2 this
may refer only to some bearer service if TA does not support
values 16, 32, 64 and 128)
4 Fax (facsimile services)
7 All classes
<time> 1..30 When "no reply" is enabled or queried, this gives the time
in seconds to wait before call is forwarded, default value is 20.Supported
only if it is multiples of 5.
<status>

SIM800 Series_AT Command Manual_V1.02

58

2013-10-23

Smart Machine Smart Decision

0
1

Not active
Active

Parameter Saving NO_SAVE

Mode
Max
Time

Response 15s

Reference
3GPP TS 27.007

Note

3.2.6 AT+CCWA Call Waiting Control

AT+CCWA Call Waiting Control
Test Command
AT+CCWA=?

Response
+CCWA: (list of supported <n>s)
OK
Parameter
See Write Command

Read Command
AT+CCWA?

Response
+CCWA: <n>
OK
Parameter
See Write Command

Write Command
Response
AT+CCWA=<n>[, TA controls the Call Waiting supplementary service. Activation,
<mode>[,<class>]] deactivation and status query are supported.
If <mode>2 and Command successful
OK
If <mode>=2 and Command successful
+CCWA:<status>,<class1>[<CR><LF>+CCWA:<status>,<class2>[...]]
OK
ERROR
If error is related to ME functionality:
+CME ERROR: <err>
Note: <status>=0 should be returned only if service is not active for any
<class> i.e. +CCWA: 0, 7 will be returned in this case.
When mode=2, all active call waiting classes will be reported. In this mode
the Command is aborted by pressing any key.
Parameters
<n>

Disable presentation of an unsolicited result code

SIM800 Series_AT Command Manual_V1.02

59

2013-10-23

Smart Machine Smart Decision

<mode>
interrogated

1 Enable presentation of an unsolicited result code

When <mode> parameter not given, network is not

0 Disable
1 Enable
2 Query status
<class>
Is a sum of integers each representing a class of information
1 Voice (telephony)
2 Data (refers to all bearer services; with <mode>=2 this
may refer only to some bearer service if TA does not support values 16,
32, 64 and 128
4 Fax (facsimile services)
7 Default(1+2+4)
<status>
0 Not active
1 Enable
Unsolicited result code
RING
+CCWA: <number>,<type>,<class>[,<alpha>]
Parameters
<number> String type (string should be included in quotation marks)
phone number of calling address in format specified by <type>
<type>
Type of address octet in integer format;
129 Unknown type
161 National number type
145 International number type
177 Network specific number
<alpha> Optional string type (string should be included in quotation
marks) alphanumeric representation of <number> corresponding to the
entry found in phone book.
Parameter
Mode
Max
Time

Saving NO_SAVE
Response 15s

Reference
3GPP TS 27.007
3.2.7AT+CEER
AT+CEER

Note

Extended Error Report

Extended Error Report

Test Command
AT+CEER=?

Response
+CEER: (list of supported <n>s)
OK

SIM800 Series_AT Command Manual_V1.02

60

2013-10-23

Smart Machine Smart Decision

Parameter
See Write Command
Read Command
AT+CEER?

Response
+CEER: <n>
OK
Parameter
See Write Command

Write Command
AT+CEER=<n>

Response
OK
Parameter
<n>
0 The reason for last call release as text code
1 The reason for last call release as number code

Execution
Command
AT+CEER

Response
TA returns an extended report of the reason for the last call release.
+CEER: <report>
OK
Parameter
<report> If AT+CEER=0, return <s>
<s> a string that represents the Cause
If AT+CEER=1, return
Cause:<c>
<c>
number representing the Cause
Parameters
<c>(number) <s>(string)
0
(No cause)
1

(unassigned (unallocated) number)

(no route to destination)

(channel unacceptable)

(operator determined barring)

16

(normal call clearing)

17

(user busy)

18

(no user responding)

19

(user alerting, no answer)

21

(call rejected)

22

(number changed)

26

(non-selected user clearing)

27

(destination out of order)

SIM800 Series_AT Command Manual_V1.02

61

2013-10-23

Smart Machine Smart Decision

28

(invalid number format (incomplete number))

29

(facility rejected)

30

(response to STATUS ENQUIRY)

31

(normal, unspecified)

34

(emergency call not possible)

38

(network out of order)

41

(temporary failure)

42

(switching equipment congestion)

43

(access information discarded)

44

(requested circuit/channel not available)

47

(resource unavailable, unspecified)

49

(quality of service unavailable)

50

(Requested facility not subscribed)

55

(Incoming calls barred within the CUG)

57

(bearer capability not authorized)

58

(bearer capability not presently available)

63

(service or option not available, unspecified)

68

(ACM equal to or greater than ACMmax)

65

(bearer service not implemented)

69

(Requested facility not implemented)

70
available)

(only restricted digital information bearer capability is

79

(service or option not implemented,unspecified)

81

(invalid transaction identifier value)

87

(user not member of CUG)

88

(incompatible destination)

91

(invalid transit network selection)

95

(semantically incorrect message)

96

(invalid mandatory information)

97

(message type non-existent or not implemented)

98

(message type not compatible with protocol state)

99

(information element non-existent or not implemented)

100

(conditional IE error)

101

(message not compatible with protocol state)

102

(recovery on timer expiry)

SIM800 Series_AT Command Manual_V1.02

62

2013-10-23

Smart Machine Smart Decision

111

(protocol error, unspecified)

127

(interworking, unspecified)

Parameter Saving
Mode

NO_SAVE

Max
Time

Response

Reference
3GPP TS 27.007
[13]
3.2.8 AT+CGMI
AT+CGMI

Note

Request Manufacturer Identification

Request Manufacturer Identification

Test Command
AT+CGMI=?

Response
OK

Execution
Command
AT+CGMI

Response
TA returns manufacturer identification text.
<manufacturer>
OK
Parameter
<manufacturer>

Parameter Saving
Mode

NO_SAVE

Max
Time

Response

Reference
3GPP TS 27.007
[13]
3.2.9 AT+CGMM
AT+CGMM

The ID of manufacturer

Note

Request Model Identification

Request Model Identification

Test Command
AT+CGMM=?

Response
OK

Execution
Command
AT+CGMM

Response
TA returns product model identification text.
<model>
OK
Parameter
<model>

Product model identification text

SIM800 Series_AT Command Manual_V1.02

63

2013-10-23

Smart Machine Smart Decision

Parameter Saving
Mode

NO_SAVE

Max
Time

Response

Reference
3GPP TS 27.007
[13]
3.2.10 AT+CGMR
AT+CGMR

Note

Request TA Revision Identification of Software Release

Request TA Revision Identification of Software Release

Test Command
AT+CGMR=?

Response
OK

Execution
Command
AT+CGMR

Response
TA returns product software version identification text.
Revision: <revision>
OK
Parameter
<revision>

Parameter Saving
Mode

NO_SAVE

Max
Time

Response

Reference
3GPP TS 27.007
[13]
3.2.11 AT+CGSN
AT+CGSN

Product software version identification text

Note

Request Product Serial Number Identification (Identical with +GSN)

Request Product Serial Number Identification (Identical with +GSN)

Test Command
AT+CGSN=?

Response
OK

Execution
Command
AT+CGSN

Response
see +GSN
<sn>
OK
Parameter
<sn>
International mobile equipment identity (IMEI)

Parameter Saving
Mode

NO_SAVE

Max

Response

SIM800 Series_AT Command Manual_V1.02

64

2013-10-23

Smart Machine Smart Decision

Time
Reference
3GPP TS 27.007
[13]
3.2.12 AT+CSCS
AT+CSCS

Note

Select TE Character Set

Select TE Character Set

Test Command
AT+CSCS=?

Response
+CSCS: (list of supported <chset>s)
OK
Parameter
<chset>

"GSM" GSM 7 bit default alphabet (3GPP TS 23.038);

"UCS2" 16-bit universal multiple-octet coded character set
(ISO/IEC10646); UCS2 character strings are converted to
hexadecimal numbers from 0000 to FFFF; e.g.
"004100620063" equals three 16-bit characters with decimal
values 65, 98 and 99
"IRA"
International reference alphabet (ITU-T T.50)
"HEX"
Character strings consist only of hexadecimal
bers from 00 to FF;
"PCCP" PC character set Code
"PCDN" PC Danish/Norwegian character set
"8859-1" ISO 8859 Latin 1 character set
Read Command
AT+CSCS?

Response
+CSCS: <chset>
OK
Parameter
See Test Command

Write Command
AT+CSCS=<chse
t>

Response
Sets which character set <chset> are used by the TE. The TA can then
convert character strings correctly between the TE and ME character sets.
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
See Test Command

Parameter Saving
Mode

AT&W_SAVE

Max
Time

Response

SIM800 Series_AT Command Manual_V1.02

65

2013-10-23

Smart Machine Smart Decision

Reference
3GPP TS 27.007
[13]

Note

3.2.13 AT+CSTA Select Type of Address

AT+CSTA Select Type of Address
Test Command
AT+CSTA=?

Response
+CSTA: (list of supported <type>s)
OK
Parameter
See Write Command

Read Command
AT+CSTA?

Response
+CSTA: <type>
OK
Parameter
<type>
Current address type setting.

Write Command
AT+CSTA=<type
>

Response
OK
If <type> is not in the parameter range:
ERROR
Parameter
<type>

Parameter Saving
Mode

NO_SAVE

Max
Time

Response

Reference
3GPP TS 27.007
[13]
3.2.14 AT+CHLD
AT+CHLD

Type of address octet in integer format;

129 Unknown type
161 National number type
145 International number type
177 Network specific number

Note
The ATD Command overrides this setting when a number is dialed.

Call Hold and Multiparty

Call Hold and Multiparty

Test Command
AT+CHLD=?

Response
+CHLD: (list of supported <n>s)

SIM800 Series_AT Command Manual_V1.02

66

2013-10-23

Smart Machine Smart Decision

OK
Parameter
See Write Command
Write Command
AT+CHLD=<n>

Response
TA controls the supplementary services Call Hold, Multiparty and Explicit
Call Transfer. Calls can be put on hold, recovered, released, added to
conversation, and transferred.
Note These supplementary services are only applicable to tele service 11
(Speech: Telephony).
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<n>
0
Releases all held calls or sets User Determined User Busy
(UDUB) for a waiting call
1
Releases all active calls (if any exist) and accepts the other
(held or waiting) call.
1x
Releases a specific call x
2
Place all active calls on hold (if any) and accept the other
(held or waiting) call.
2x Places all active calls on hold except call X with which
communication shall be supported.
3
Adds a held call to the conversation.
4
Connects the two calls and disconnects the subscriber from
both calls(ECT)

Parameter
Mode
Max
Time

Saving NO_SAVE
Response 20s

Reference

Note

3.2.15 AT+CIMI
AT+CIMI

Request International Mobile Subscriber Identity

Request International Mobile Subscriber Identity

Test Command
AT+CIMI=?

Response
OK

Execution
Command
AT+CIMI

Response
TA returns <IMSI>for identifying the individual SIM which is attached to
ME.
<IMSI>

SIM800 Series_AT Command Manual_V1.02

67

2013-10-23

Smart Machine Smart Decision

OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<IMSI>
International Mobile Subscriber Identity (string without
double quotes)
Parameter Saving
Mode

NO_SAVE

Max Response
Time

20s

Reference
3GPP TS 27.007
[13]

Note

3.2.16 AT+CLCC
AT+CLCC

List Current Calls of ME

List Current Calls of ME

Test Command
AT+CLCC=?

Response
+CLCC: (0,1)
OK
Parameter
See Write Command

Read Command
AT+CLCC?

Response
+CLCC: <n>
OK
Parameter
See Write Command

Write Command
AT+CLCC=<n>

Response
OK
Parameter
<n>
0 Dont report a list of current calls of ME automatically
when the current call status changes.
1 Report a list of current calls of ME automatically when the
current call status changes.

Execution
Command
AT+CLCC

Response
TA returns a list of current calls of ME.
Note: If Command succeeds but no calls are available, no information
response is sent to TE.
[+CLCC: <id1>,<dir>,<stat>,<mode>,<mpty>[,<number>,<type
>,<alphaID>]
[<CR><LF>+CLCC: <id2>,<dir>,<stat>,<mode>,<mpty>

SIM800 Series_AT Command Manual_V1.02

68

2013-10-23

Smart Machine Smart Decision

[,<number>,<type>,<alphaID>][...]]]
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<idx>
1..7 Call identification number
This number can be used in +CHLD command operations
<dir>
0 Mobile originated (MO) call
1 Mobile terminated (MT) call
<stat>
State of the call:
0 Active
1 Held
2 Dialing (MO call)
3 Alerting (MO call)
4 Incoming (MT call)
5 Waiting (MT call)
6 Disconnect
<mode>
Bearer/tele service:
0 Voice
1 Data
2 Fax
<mpty>
0 Call is not one of multiparty (conference) call parties
1 Call is one of multiparty (conference) call parties
<number>
String type (string should be included in quotation marks)
phone number in format specified by <type>.
<type>
Type of address
<alphaId>
String type (string should be included in quotation marks)
alphanumeric representation of <number> corresponding to the entry
found in phone book.
Parameter Saving
Mode

AUTO_SAVE

Max
Time

Response

Reference
3GPP TS 27.007
[13][14]
3.2.17 AT+CLCK
AT+CLCK

Note

Facility Lock

Facility Lock

Test Command
AT+CLCK=?

Response
+CLCK: (list of supported <fac>s)

SIM800 Series_AT Command Manual_V1.02

69

2013-10-23

Smart Machine Smart Decision

OK
Parameter
See Write Command
Write Command
AT+CLCK=<fac>
,<mode>[,<passw
d>[,<class>]]

Response
This Command is used to lock, unlock or interrogate a ME or a network
facility <fac>. Password is normally needed to do such actions. When
querying the status of a network service (<mode>=2) the response line for
not active case (<status>=0) should be returned only if service is not
active for any <class>.
If <mode>2 and Command is successful
OK
If <mode>=2 and Command is successful
+CLCK: <status>[,<class1>[<CR><LF>+CLCK:
<status>,<class2>[]]
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<fac>
"AO"
BAOC (Barr All Outgoing Calls)
"OI" BOIC (Barr Outgoing International Calls)
"OX"
BOIC-exHC (Barr Outgoing International Calls
except to Home Country)
"AI" BAIC (Barr All Incoming Calls)
"IR" BIC-Roam (Barr Incoming Calls when Roaming
outside the home country)
"FD" SIM card or active application in the UICC (GSM or
USIM) fixed dialling memory feature (if PIN2 authentication has not been
done during the current session, PIN2 is required as <passwd>)
"SC"
SIM (lock SIM/UICC card) (SIM/UICC asks
password in MT power-up and when this lock command issued)
Correspond to PIN1 code.
"PN" Network Personalization, Correspond to NCK code
"PU" Network subset Personalization
Correspond to NSCK code
"PP" Service Provider Personalization
Correspond to SPCK code
<mode>
0 unlock
1 lock
2 query status
<passwd>
String type (Shall be the same as password specified for the

SIM800 Series_AT Command Manual_V1.02

70

2013-10-23

Smart Machine Smart Decision

facility from the MT user interface or with command Change Password

+CPWD)
<class>
1 Voice (telephony)
2 Data refers to all bearer services; with <mode>=2 this
may refer only to some bearer service if TA does not support values 16,
32, 64 and 128)
4 Fax (facsimile services)
<status>
Parameter
Mode
Max
Time

7 All classes
0 Not active
1 Active

Saving NO_SAVE
Response 15s

Reference
Note
3GPP TS 27.007 CME errors if SIM not inserted or PIN is not entered.
[14]
3.2.18 AT+CLIP Calling Line Identification Presentation
AT+CLIP Calling Line Identification Presentation
Test Command
AT+CLIP=?

Response
+CLIP: (list of supported <n>s)
OK
Parameter
See Write Command

Read Command
AT+CLIP?

Response
+CLIP: <n>, <m>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
See Write Command

Write Command
AT+CLIP=<n>

Response
TA enables or disables the presentation of the CLI at the TE. It has no
effect on the execution of the supplementary service CLIP in the network.
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<n>
0 Disable +CLIP notification.

SIM800 Series_AT Command Manual_V1.02

71

2013-10-23

Smart Machine Smart Decision

<m>

1 Enable +CLIP notification.

0 CLIP not provisioned
1 CLIP provisioned
2 unknown (e.g. no network, etc.)

Unsolicited Result Code

When the presentation of the CLI at the TE is enabled (and calling
subscriber allows), an unsolicited result code is returned after every RING
(or +CRING: <type>) at a mobile terminating call.
+CLIP: <number>,<type>[,<subaddr>,<satype>,<alphaId>,<CLI
validity>]
Parameters
<number>
String type (string should be included in quotation marks)
phone number of calling address in format specified by
<type>.
<type>
Type of address octet in integer format;
129 Unknown type
161 National number type
145 International number type
177 Network specific number
<subaddr>
String type (subaddress of format specified by <satype>)
<satype>
Integer type (type of subaddress)
<alphaId>
String type (string should be included in quotation marks)
alphanumeric representation of <number> corresponding to the entry
found in phone book.
<CLI validity>
0 CLI valid
1 CLI has been withheld by the originator.
2 CLI is not available due to interworking problems or
limitations of originating network.
Parameter
Mode

Saving NO_SAVE

Max Response
Time

15s

Reference

Note

3.2.19 AT+CLIR
AT+CLIR

Calling Line Identification Restriction

Calling Line Identification Restriction

Test Command
AT+CLIR=?

Response
+CLIR: (list of supported <n>s)
OK
Parameter

SIM800 Series_AT Command Manual_V1.02

72

2013-10-23

Smart Machine Smart Decision

See Write Command

Read Command
AT+CLIR?

Response
+CLIR: <n>, <m>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
See Write Command

Write Command
AT+CLIR=<n>

Response
TA restricts or enables the presentation of the CLI to the called party when
originating a call.
The Command overrides the CLIR subscription (default is restricted or
allowed) when temporary mode is provisioned as a default adjustment for
all following outgoing calls. This adjustment can be revoked by using the
opposite Command.
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<n>
(parameter sets the adjustment for outgoing calls):
0 Presentation indicator is used according to the subscription of
the CLIR service.
1 CLIR invocation
2 CLIR suppression
<m>
(parameter shows the subscriber CLIR service status in the
network):
0 CLIR not provisioned
1 CLIR provisioned in permanent mode
2 Unknown (e.g. no network, etc.)
3 CLIR temporary mode presentation restricted
4 CLIR temporary mode presentation allowed

Parameter
Mode

Saving NO_SAVE

Max Response
Time

15s

Reference

Note

3.2.20 AT+CMEE
AT+CMEE

Report Mobile Equipment Error

Report Mobile Equipment Error

SIM800 Series_AT Command Manual_V1.02

73

2013-10-23

Smart Machine Smart Decision

Test Command
AT+CMEE=?

Response
+CMEE: (list of supported <n>s)
OK
Parameter
See Write Command

Read Command
AT+CMEE?

Response
+CMEE: <n>
OK
Parameter
See Write Command

Write Command
AT+CMEE=[<n>
]

Response
TA disables or enables the use of result code +CME ERROR: <err> as an
indication of an error relating to the functionality of the ME.
OK
If error is related to ME functionality:
+CME ERROR:<err>
Parameter
<n>
0
Disable +CME ERROR: <err> result code and use ERROR
instead.
1 Enable +CME ERROR: <err> result code and use numeric
<err>
2
Enable +CME ERROR: <err> result code and use verbose
<err> values

Parameter Saving
Mode

AT&W_SAVE

Max
Time

Response

Reference
3GPP TS 27.007
[13]

Note

3.2.21 AT+COLP Connected Line Identification Presentation

AT+COLP Connected Line Identification Presentation
Test Command
AT+COLP=?

Response
+COLP: (list of supported <n>s)
OK
Parameter
See Write Command

Read Command

Response

SIM800 Series_AT Command Manual_V1.02

74

2013-10-23

Smart Machine Smart Decision

AT+COLP?

+COLP: <n>,<m>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
See Write Command

Write Command
AT+COLP=<n>

Response
TA enables or disables the presentation of the COL (Connected Line) at the
TE for a mobile originated call. It has no effect on the execution of the
supplementary service COLR in the network.
Intermediate result code is returned from TA to TE before any +CR or
V.25ter responses.
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<n>
(parameter sets/shows the result code presentation status in the
TA):
0 Disable +COLP notification
1 Enable +COLP notification
<m>
(parameter shows the subscriber COLP service status in the
network):
0 COLP not provisioned
1 COLP provisioned
2 Unknown (e.g. no network, etc.)
Intermediate result code
When enabled (and called subscriber allows), an intermediate result code is
returned before any +CR or V.25ter responses:
+COLP: <number>,<type>[,<subaddr>,<satype> ,<alphaId>]
Parameters
<number>
String type (string should be included in quotation marks)
phone number of format specified by <type>
<type>
Type of address octet in integer format;
129 Unknown type
161 National number type
145 International number type
177 Network specific number
<subaddr> String type (string should be included in quotation marks)
sub address of format specified by <satype>
<satype>
Type of sub address octet in integer format (refer GSM
04.08 [8] sub clause 10.5.4.8)
<alphaId>
String type (string should be included in quotation marks)

SIM800 Series_AT Command Manual_V1.02

75

2013-10-23

Smart Machine Smart Decision

alphanumeric representation of <number> corresponding to the entry

found in phone book.
Parameter
Mode
Max
Time

Saving NO_SAVE
Response -

Reference

Note

3.2.22 AT+COPS
AT+COPS

Operator Selection

Operator Selection

Test Command
AT+COPS=?

Response
TA returns a list of quadruplets, each representing an operator present in
the network. Any of the formats may be unavailable and should then be an
empty field. The list of operators shall be in order: home network,
networks referenced in SIM, and other networks.
+COPS: (list of supported<stat>,long alphanumeric<oper>,short
alphanumeric<oper>,numeric <oper>)s[,,(list of supported <mode>s),
(list of supported <format>s)]
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
See Write Command

Read Command
AT+COPS?

Response
TA returns the current mode and the currently selected operator. If no
operator is selected, <format> and <oper> are omitted.
+COPS: <mode>[,<format>, <oper>]
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
See Write Command

Write Command
AT+COPS=<mo
de>,[<format>[,<
oper>]]

Response
TA forces an attempt to select and register the GSM network operator. If
the selected operator is not available, no other operator shall be selected
(except <mode>=4). The selected operator name format shall apply to
further read commands (+COPS?).

SIM800 Series_AT Command Manual_V1.02

76

2013-10-23

Smart Machine Smart Decision

OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<stat>

<oper>
<mode>

<format>

0
1
2
3

Unknown
Operator available
Operator current
Operator forbidden

Refer to [27.007]
operator in format as per <format>
0 Automatic mode; <oper> field is ignored
1 Manual (<oper> field shall be present, and <AcT>
optionally)
2 manual deregister from network
3 set only <format> (for read Command +COPS?) - not
shown in Read Command response
4 Manual/automatic (<oper> field shall be present); if
manual selection fails, automatic mode (<mode>=0) is
entered
0 Long format alphanumeric <oper>
1 Short format alphanumeric <oper>
2 Numeric <oper>; GSM Location Area Identification

number
Parameter Saving
Mode

AUTO_SAVE

Max
Time

Test command: 45 seconds

Write command: 120 seconds

Response

Reference
3GPP TS 27.007
[14]
3.2.23 AT+CPAS
AT+CPAS

Note

Phone Activity Status

Phone Activity Status

Test Command
AT+CPAS=?

Response
+CPAS: (list of supported <pas>s)
OK
Parameter
See Execution Command

Execution
Command
AT+CPAS

Response
TA returns the activity status of ME.
+CPAS: <pas>

SIM800 Series_AT Command Manual_V1.02

77

2013-10-23

Smart Machine Smart Decision

OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<pas>
0 Ready (MT allows commands from TA/TE)
2 Unknown (MT is not guaranteed to respond to
tructions)
3 Ringing (MT is ready for commands from TA/TE, but the
ringer is active)
4 Call in progress (MT is ready for commands from TA/TE,
a call is in progress)
Parameter Saving
Mode

NO_SAVE

Max
Time

Response

Reference
3GPP TS 27.007
[13]

Note

3.2.24 AT+CPBF Find Phonebook Entries

AT+CPBF Find Phonebook Entries
Test Command
AT+CPBF=?

Response
+CPBF: maximum length of field <nlength>,maximum length of field
<tlength>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
See Write Command

Write Command
Response
AT+CPBF=[<find TA returns phone book entries (from the current phone book memory
storage selected with +CPBS) which contains alphanumeric string
text>]
<findtext>.
[+CPBF:<index1>,<number>,<type>,<text>]
[[]<CR><LF>+CBPF:<index2>,<number>,<type>,<text>]
OK
Parameters
<findtext>
String type(string should be included in quotation marks)
field of maximum length <tlength> in current TE character set specified by

SIM800 Series_AT Command Manual_V1.02

78

2013-10-23

Smart Machine Smart Decision

+CSCS.
<index1>
Integer type values in the range of location numbers of
phone book memory
<index2>Integer type values in the range of location numbers of phone
book memory
<number> String type (string should be included in quotation marks)
phone number of format <type>
<type>
Type of address octet in integer format ;
129 Unknown type
145 International number type
<text> String type (string should be included in quotation marks) field
of maximum length <tlength> in current TE character set specified by
+CSCS.
<nlength>
Integer type value indicating the maximum length of field
<number>
<tlength>
Integer type value indicating the maximum length of field
<text>
Parameter
Mode
Max
Time

Saving NO_SAVE
Response 30 seconds (complete reading of a 250 records full phonebook)
3 seconds(string present in a 250 records full phonebook)
1 second(string not present)
We use the China Mobile sim cards for testing, which produced by Axalto
at 2010 for Shanghai. Use other sim cards may have different results.

Reference
Note
3GPP TS 27.007
[13]
3.2.25 AT+CPBR
AT+CPBR

Read Current Phonebook Entries

Read Current Phonebook Entries

Test Command
AT+CPBR=?

Response
TA returns location range supported by the current storage as a compound
value and the maximum lengths of <number> and <text> fields.
+CPBR: (list of supported <index>s), <nlength>, <tlength>
OK
Parameters
<index>
<nlength>
<tlength>

Location number
Max. length of phone number
Max. length of text for number

Write Command
Response
AT+CPBR=<inde TA returns phone book entries in location number range <index1>...

SIM800 Series_AT Command Manual_V1.02

79

2013-10-23

Smart Machine Smart Decision

x1>[,<index2>]

<index2> from the current phone book memory storage selected with
+CPBS. If <index2> is left out, only location <index1> is returned.
+CPBR:<index1>,<number>,<type>,<text>
[[]<CR><LF>+CPBR: <index2>, <number>, <type>, <text>]
OK
Parameters
<index1>
Read as of this location number
<index2>
Read to this location number
<number> Phone number
<type>
Type of number
<text> Text for phone number in current TE character set specified by
+CSCS.

Parameter
Mode
Max
Time

Saving NO_SAVE
Response 3 seconds (single reading)
30 seconds (complete reading of a 250 records full phonebook.
We use the China Mobile sim cards for testing, which produced by Axalto
at 2010 for Shanghai. Use other sim cards may have different results.

Reference
Note
3GPP TS 27.007
[13]
3.2.26 AT+CPBS
AT+CPBS

Select Phonebook Memory Storage

Select Phonebook Memory Storage

Test Command
AT+CPBS=?

Response
+CPBS: (list of supported <storage>s)
OK
Parameter
See Write Command

Read Command
AT+CPBS?

Response
+CPBS: <storage>,<used>,<total>
OK
Parameters
See Write Command

Write Command
Response
AT+CPBS=<stora TA selects current phone book memory storage, which is used by other
phone book commands.
ge>
OK

SIM800 Series_AT Command Manual_V1.02

80

2013-10-23

Smart Machine Smart Decision

Parameters
<storage>

<used>
<total>
Parameter
Mode
Max
Time

"ON"
SIM (or MT) own numbers (MSISDNs) list
(reading of this storage may be available through +CNUM
also). When storing information in the SIM/UICC, if a SIM
card is present or if a UICC with an active GSM application
is present, the information in EFMSISDN under
DFTelecom is selected.
"SM" SIM/UICC phonebook. If a SIM card is present or
if a UICC with an active GSM application is present, the
EFADN under DFTelecom is selected.
"ME" ME phonebook
Integer type value indicating the total number of used
locations in selected memory
Integer type value indicating the total number of locations
in selected memory

Saving NO_SAVE
Response 3 seconds

Reference
Note
3GPP TS 27.007
[13]
3.2.27 AT+CPBW Write Phonebook Entry
AT+CPBW Write Phonebook Entry
Test Command
AT+CPBW=?

Response
TA returns location range supported by the current storage, the maximum
length of <number> field, supported number formats of the storage, and
the maximum length of <text> field.
+CPBW: (list of supported <index>s), <nlength>, (list of supported
<type>s), <tlength>
OK
Parameters
See Write Command

Write Command
AT+CPBW=<inde
x>[,<number>,[<t
ype>,[<text>]]]

Response
TA writes phone book entry in location number <index> in the current
phone book memory storage selected with +CPBS. Entry fields written are
phone number <number> (in the format <type>) and text <text> associated
with the number. If those fields are omitted, phone book entry is deleted. If
<index> is left out, but <number> is given, entry is written to the first free

SIM800 Series_AT Command Manual_V1.02

81

2013-10-23

Smart Machine Smart Decision

location in the phone book.

OK
Parameters
<nlength>
<tlength>
<index>
<number>
<type>

Max length of phone number

Max length of text for number
Location number
Phone number
Type of number;
129 National number type
145 International number type
<text> String type (string should be included in quotation marks): text
for phone number in current TE character set specified by +CSCS.
Note:
The following characters in <text> must be entered via the
escape sequence:
GSM char.
Seq. Seq.(hex)
Note
\
\5C 5C 35 43
(backslash)
"
\22 5C 32 32
(string delimiter)
BSP
\08 5C 30 38
(backspace)
NULL
\00 5C 30 30
(GSM null)
0 (GSM null) may cause problems for application layer software
when reading string lengths.
Parameter
Mode
Max
Time

Saving NO_SAVE
Response 3 seconds

Reference
Note
3GPP TS 27.007
[13]
3.2.28 AT+CPIN
AT+CPIN

Enter PIN

Enter PIN

Test Command
AT+CPIN=?

Response
OK

Read Command
AT+CPIN?

Response
TA returns an alphanumeric string indicating whether some password is
required or not.
+CPIN: <code>
OK

SIM800 Series_AT Command Manual_V1.02

82

2013-10-23

Smart Machine Smart Decision

Parameter
<code>
READY
MT is not pending for any password
SIM PIN
MT is waiting SIM PIN to be given
SIM PUK
MT is waiting for SIM PUK to be given
PH_SIM PIN ME is waiting for phone to SIM card (antitheft)
PH_SIM PUK ME is waiting for SIM PUK (antitheft)
SIM PIN2
PIN2, e.g. for editing the FDN book possible only
if preceding Command was acknowledged with +CME
ERROR:17
SIM PUK2 Possible only if preceding Command was
acknowledged with error +CME ERROR: 18.
Write Command
Response
AT+CPIN=<pin>[ TA stores a password which is necessary before it can be operated (SIM
PIN, SIM PUK, PH-SIM PIN, etc.).
,<new pin>]
If the PIN required is SIM PUK or SIM PUK2, the second pin is required.
This second pin, <new pin>, is used to replace the old pin in the SIM.
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<pin>
String type; password
<new pin>
String type; If the PIN required is SIM PUK or SIMPUK2:
new password
Parameter
Mode
Max
Time

Saving NO_SAVE
Response 5s

Reference
Note
3GPP TS 27.007
[13]
3.2.29 AT+CPWD
AT+CPWD

Change Password

Change Password

Test Command
AT+CPWD=?

Response
TA returns a list of pairs which present the available facilities and the
maximum length of their password.
+CPWD: (list of supported <fac>s, list of supported <pwdlength>s)
OK
Parameters
<fac>
<pwdlength>

SIM800 Series_AT Command Manual_V1.02

See Write Command

Integer max. length of password
83

2013-10-23

Smart Machine Smart Decision

Write Command
AT+CPWD =
<fac>, <oldpwd>,
<newpwd>

Response
TA sets a new password for the facility lock function.
OK
Parameters
<fac>
"AO"
BAOC (Barr All Outgoing Calls)
"OI" BOIC (Barr Outgoing International Calls)
"OX"
BOIC-exHC (Barr Outgoing International Calls
except to Home Country)
"AI" BAIC (Barr All Incoming Calls)
"IR" BIC-Roam (Barr Incoming Calls when Roaming
outside the home country)
"AB" All Barring services
"P2" SIM PIN2
"SC" SIM (lock SIM/UICC card) (SIM/UICC asks password
in MT power-up and when this lock command issued) Correspond to PIN1
code.
<oldpwd>
String type (string should be included in quotation marks):
password specified for the facility from the user interface or with
command. If an old password has not yet been set, <oldpwd> is not to
enter.
<newpwd>
String type (string should be included in quotation marks):
new password

Parameter
Mode
Max
Time

Saving NO_SAVE
Response 15s

Reference
Note
3GPP TS 27.007
[13]
3.2.30 AT+CR
AT+CR

Service Reporting Control

Service Reporting Control

Test Command
AT+CR=?

Response
+CR: (list of supported <mode>s)
OK
Parameter
See Write Command

Read Command
AT+CR?

Response
+CR: <mode>
OK

SIM800 Series_AT Command Manual_V1.02

84

2013-10-23

Smart Machine Smart Decision

Parameter
See Write Command
Write Command
AT+CR=[<mode
>]

Response
TA controls whether or not intermediate result code +CR: <serv> is
returned from the TA to the TE at a call set up.
OK
Parameter
<mode>

0 Disable
1 Enable

Intermediate result code

If enabled, an intermediate result code is transmitted at the point during
connect negotiation at which the TA has determined which speed and
quality of service will be used, before any error control or data
compression reports are transmitted, and before any final result code (e.g.
CONNECT) is transmitted.
+CR:<serv>
Parameter
<serv>

Parameter Saving
Mode

NO_SAVE

Max
Time

Response

Reference
3GPP TS 27.007
[13]
3.2.31 AT+CRC
AT+CRC

ASYNC
Asynchronous transparent
SYNC
Synchronous transparent
REL ASYNC Asynchronous non-transparent
REL SYNC
Synchronous non-transparent
GPRS
For GPRS

Note

Set Cellular Result Codes for Incoming Call Indication

Set Cellular Result Codes for Incoming Call Indication

Test Command
AT+CRC=?

Response
+CRC: (list of supported <mode>s)
OK
Parameter
See Write Command

Read Command
AT+CRC?

Response
+CRC: <mode>
OK

SIM800 Series_AT Command Manual_V1.02

85

2013-10-23

Smart Machine Smart Decision

Parameter
See Write Command
Write Command
AT+CRC=[<mod
e>]

Response
TA controls whether or not the extended format of incoming call
indication is used.
OK
Parameter
<mode>

0 Disable extended format

1 Enable extended format
Omitted Use previous value

Unsolicited Result Code

When enabled, an incoming call is indicated to the TE with unsolicited
result code +CRING: <type> instead of the normal RING.
Parameter
<type>

Parameter Saving
Mode

NO_SAVE

Max
Time

Response

Reference
3GPP TS 27.007
[13]

ASYNC
SYNC
REL ASYNC
REL SYNC
FAX
VOICE

Asynchronous transparent
Synchronous transparent
Asynchronous non-transparent
Synchronous non-transparent
Facsimile
Voice

Note

3.2.32 AT+CREG Network Registration

AT+CREG Network Registration
Test Command
AT+CREG=?

Response
+CREG: (list of supported <n>s)
OK
Parameter
See Write Command

Read Command
AT+CREG?

Response
TA returns the status of result code presentation and an integer <stat>
which shows whether the network has currently indicated the registration
of the ME. Location information elements <lac> and <ci> are returned
only when <n>=2 and ME is registered in the network.
+CREG: <n>,<stat>[,<lac>,<ci>]

SIM800 Series_AT Command Manual_V1.02

86

2013-10-23

Smart Machine Smart Decision

OK
If error is related to ME functionality:
+CME ERROR: <err>
Write Command
AT+CREG=[<n>
]

Response
TA controls the presentation of an unsolicited result code +CREG: <stat>
when <n>=1 and there is a change in the ME network registration status.
OK
Parameters
<n>

0 Disable network registration unsolicited result code

1 Enable network registration unsolicited result code
+CREG: <stat>
2 Enable network registration unsolicited result code with
location information +CREG: <stat>[,<lac>,<ci>]
<stat>
0 Not registered, MT is not currently searching a new
operator to register to
1 Registered, home network
2 Not registered, but MT is currently searching a new
operator to register to
3 Registration denied
4 Unknown
5 Registered, roaming
<lac>
String type (string should be included in quotation marks);
two byte location area code in hexadecimal format
<ci>
String type (string should be included in quotation marks);
two byte cell ID in hexadecimal format
Unsolicited Result Code
If <n>=1 and there is a change in the MT network registration status
+CREG: <stat>
If <n>=2 and there is a change in the MT network registration status or a
change of the network cell:
+CREG: <stat>[,<lac>,<ci>]
Parameters
See Write Command
Parameter Saving
Mode

AT&W_SAVE

Max
Time

Response

Reference
3GPP TS 27.007
[13]

Note

SIM800 Series_AT Command Manual_V1.02

87

2013-10-23

Smart Machine Smart Decision

3.2.33 AT+CRLP Select Radio Link Protocol Parameters

AT+CRLP Select Radio Link Protocol Parameters
Test Command
AT+CRLP=?

Response
TA returns values supported. RLP versions 0 and 1 share the same
parameter set.
+CRLP: (list of supported <iws>s),(list of supported <mws>s),(list of
supported <T1>s),(list of supported <N2>s),(list of supported <T4>s)
OK
Parameters
See Write Command

Read Command
AT+CRLP?

Response
TA returns current settings for RLP version.
the same parameter set.

RLP versions 0 and 1 share

+CRLP: <iws>,<mws>,<T1>,<N2>,<T4>
OK
Parameters
See Write Command
Write Command
AT+CRLP=<iws
>[,<mws>[,<T1>[
,<N2> [,<T4>]]]]

Response
TA sets radio link protocol (RLP) parameters used when non-transparent
data calls are setup.
OK
Parameters
<iws>
0-61 Interworking window size (IWF to MS)
<mws> 0-61 Mobile window size(MS to IWF)
<T1> 44-255 Acknowledgment timer T1 in 10 ms units
<N2> 1-255 Retransmission attempts N2
<T4>
7 Re-sequencing period in integer format, in units of 10 ms.

Parameter Saving
Mode

AT&W_SAVE

Max
Time

Response

Reference
3GPP TS 27.007
[13]
3.2.34 AT+CRSM
AT+CRSM

Simcom redefine param`s value range

Restricted SIM Access

Restricted SIM Access

Test Command
AT+CRSM=?

Response
OK

SIM800 Series_AT Command Manual_V1.02

88

2013-10-23

Smart Machine Smart Decision

Write Command
AT+CRSM=<Co
mmand>[,<fileId
>[,<P1>,<P2>,<P
3>[,<data>]]]

Response
+CRSM: <sw1>, <sw2> [,<response>]
OK
ERROR
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<Command>
176 READ BINARY
178 READ RECORD
192 GET RESPONSE
214 UPDATE BINARY
220 UPDATE RECORD
242 STATUS
All other values are reserved; refer GSM 11.11.
<fileId> Integer type; this is the identifier for an elementary data file on
SIM. Mandatory for every Command except STATUS
<P1>,<P2>,<P3> Integer type, range 0 255
Parameters to be passed on by the ME to the SIM; refer GSM
11.11.
<data>
Information which shall be written to the SIM (hex-decimal
character format)
<sw1>, <sw2>
Integer type, range 0 - 255
Status information from the SIM about the execution of the
actual Command. These parameters are delivered to the TE in
both cases, on successful or failed execution of the Command;
refer GSM 11.11.
<response>
Response of a successful completion of the Command
previously issued (hexadecimal character format)

Parameter Saving
Mode

NO_SAVE

Max
Time

Response

Reference
3GPP TS 27.007
GSM 11.11
3.2.35 AT+CSQ
AT+CSQ

Note

Signal Quality Report

Signal Quality Report

Test Command
AT+CSQ=?

Response
+CSQ: (list of supported <rssi>s),(list of supported <ber>s)

SIM800 Series_AT Command Manual_V1.02

89

2013-10-23

Smart Machine Smart Decision

OK
Execution
Command
AT+CSQ

Response
+CSQ: <rssi>,<ber>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Execution Command returns received signal strength indication <rssi>
and channel bit error rate <ber> from the ME. Test Command returns
values supported by the TA.
Parameters
<rssi>

<ber>

0
-115 dBm or less
1
-111 dBm
2...30
-110... -54 dBm
31
-52 dBm or greater
99
not known or not detectable
(in percent):
0...7
As RXQUAL values in the table in GSM 05.08 [20]
subclause 7.2.4
99
Not known or not detectable

Parameter Saving
Mode

NO_SAVE

Max
Time

Response

Reference
3GPP TS 27.007
[13]
3.2.36 AT+FCLASS
AT+FCLASS

Note

FAX: Select, Read or Test Service Class

FAX: Select, Read or Test Service Class

Test Command
AT+FCLASS=?

Response
+FCLASS: (list of supported <class>s)
OK
Parameter
See Write Command

Read Command
AT+FCLASS?

Response
+FCLASS: <class>
OK
Parameter

SIM800 Series_AT Command Manual_V1.02

90

2013-10-23

Smart Machine Smart Decision

See Write Command

Write Command
Response
AT+FCLASS=<cl TA sets a particular mode of operation (data fax). This causes the TA to
process information in a manner suitable for that type of information
ass>
OK
Parameter
<class>
0 data
1 fax class 1 (TIA-578-A)
Parameter
Mode
Max
Time

Saving AT&W_SAVE
Response -

Reference
Note
3GPP TS 27.007 Available only in SIM800V
[13]
3.2.37 AT+FMI
AT+FMI

FAX: Report Manufactured ID

FAX: Report Manufactured ID

Test Command
AT+FMI=?

Response
OK

Execution
Command
AT+FMI

Response
TA reports one or more lines of information text which permit the user to
identify the manufacturer.
<manufacturer Id>
OK
Parameter
<manufacturer Id>

Parameter
Mode
Max
Time

The ID of manufacturer

Saving NO_SAVE
Response -

Reference
EIA/TIA-578-D
3.2.38 AT+FMM
AT+FMM

Note
Available only in SIM800V
FAX: Report Model ID

FAX: Report Model ID

SIM800 Series_AT Command Manual_V1.02

91

2013-10-23

Smart Machine Smart Decision

Test Command
AT+FMM=?

Response
OK

Execution
Command
AT+FMM

Response
TA reports one or more lines of information text which permit the user to
identify the specific model of device.
<model Id>
OK
Parameter
<model Id>

Parameter
Mode
Max
Time

The ID of model

Saving NO_SAVE
Response -

Reference
EIA/TIA-578-D
3.2.39 AT+FMR
AT+FMR

Note
Available only in SIM800V
FAX: Report Revision ID

FAX: Report Revision ID

Test Command
AT+FMR=?

Response
OK

Execution
Command
AT+FMR

Response
TA reports one or more lines of information text which permit the user to
identify the version, revision level or data or other information of the
device.
Revision:<Revision Id>
OK
Parameter
<Revision Id>
of the device.

Parameter
Mode
Max
Time

The version, revision level or data or other information

Saving NO_SAVE
Response -

Reference
EIA/TIA-578-D
3.2.40 AT+VTD
AT+VTD

Note
Available only in SIM800V
Tone Duration

Tone Duration

SIM800 Series_AT Command Manual_V1.02

92

2013-10-23

Smart Machine Smart Decision

Test Command
AT+VTD=?

Response
+VTD: (list of supported <n>s)
OK
Parameter
See Write Command

Read Command
AT+VTD?

Response
+VTD: <n>
OK
Parameter
See Write Command

Write Command
AT+VTD=<n>

Response
This command refers to an integer <n> that defines the length of tones
emitted as a result of the +VTS command. This does not affect the D
command.
OK
Parameter
<n>
1-255

Parameter Saving
Mode

AT&W_SAVE

Max
Time

Response

Reference
3GPP TS 27.007
[13]
3.2.41 AT+VTS
AT+VTS

Duration of the tone in 1/10 seconds

Note

DTMF and Tone Generation

DTMF and Tone Generation

Test Command
AT+VTS=?

Response
+VTS: (list of supported <dtmf>s),(list of supported <duration>s)
OK
Parameters
See Write Command

Write Command
Generate
tone
Duration is set by
+VTD
AT+VTS=<dtmfstring>

Response
This Command allows the transmission of DTMF tones and arbitrary
tones in voice mode. These tones may be used (for example) when
announcing the start of a recording period.
Note: D is used only for dialing.
OK
If error is related to ME functionality:

SIM800 Series_AT Command Manual_V1.02

93

2013-10-23

Smart Machine Smart Decision

+CME ERROR: <err>

Note: The Command is writing only.
Parameters
<dtmf-string> Which has a max length of 20 characters, must be entered
between double quotes ("") and consists of combinations of the following
separated by commas. But a single character does not require quotes.
1) <dtmf> A single ASCII characters in the set 0-9, #,*, A-D.
This is interpreted as a sequence of DTMF tones whose duration
is set by the +VTD Command.
2) {<dtmf>, <duration>} This is interpreted as a DTMF tone
whose duration is determined by <duration>.
<duration> Duration of the tone in 1/10 seconds range :1-255
Parameter Saving
Mode

NO_SAVE

Max
Time

number of DTMF characters*duration.

Response

Reference
3GPP TS 27.007
[13]
3.2.42 AT+CMUX
AT+CMUX

Note

Multiplexer Control

Multiplexer Control

Test Command
AT+CMUX=?

Response
+CMUX: (0)

OK
Parameters
See Write Command
Read Command
AT+CMUX?

Response:
+CMUX:[<mode>[,<subset>[,<port_speed>[,<N1>[,<T1>[,<N2>[,<T2
>[,<T3>[,<k>]]]]]]]]]
OK
ERROR
Parameters
<mode>

Multiplexer transparency mechanism

0 Basic option
<subset>
The way in which the multiplexer control channel is set up
0 UIH frames used only
<port_speed> Transmission rate
1 9600 bits/t
SIM800 Series_AT Command Manual_V1.02

94

2013-10-23

Smart Machine Smart Decision

2
3
4
5
6
7

19200 bits/t
38400 bits/t
57600 bits/t
115200 bit/s
230400 bits/t
460800 bits/t
Proprietary values, available if MUX NEW PORT
SPEED FTR is activated
8 921600 bits/t
Proprietary values, available if MUX NEW PORT
SPEED FTR is activated
<N1>
Maximum frame size
1-255
Default: 127
<T1>
Acknowledgement timer in units of ten milliseconds
1-255
Default:10 (100 ms)
<N2>
Maximum number of re-transmissions
0-100
Default:3
<T2>
Max Response Timer for the multiplexer control channel in
units of ten milliseconds
2-255
Default:30
<T3>
Wake up Max Response Timers in seconds
1-255
Default:10
<k>
Window size, for Advanced operation with Error Recovery
options
1-7
Default:2
Write Command
AT+CMUX=<mo
de>

Response
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<mode>

Parameter Saving
Mode

NO_SAVE

Max
Time

Response

Reference
3GPP TS 27.007
[13]

Multiplexer transparency mechanism

0 Basic option

Note
The multiplexing transmission rate is according to the current serial baud
rate. It is recommended to enable multiplexing protocol under 115200
bit/s baud rate
Multiplexer control channels are listed as follows:
Channel Number
Type
DLCI
None
Multiplexer Control
0
1
3GPP TS 27.007 and 005
1

SIM800 Series_AT Command Manual_V1.02

95

2013-10-23

Smart Machine Smart Decision

2
3
4
3.2.43 AT+CNUM
AT+CNUM

3GPP TS 27.007 and 005

3GPP TS 27.007 and 005
3GPP TS 27.007 and 005

2
3
4

Subscriber Number

Subscriber Number

Test Command
AT+CNUM=?

Response
OK

Execution
Command
AT+CNUM

Response
+CNUM: [<alpha1>],<number1>,<type1>[,<speed>,<service>]
[<CR><LF>+CNUM:[<alpha2>],<number2>,<type2>[,<speed>,<serv
ice>]
[...]]
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<alphax>
Optional alphanumeric string associated with <numberx>;
used character set should be the one selected with Command Select TE
Character Set +CSCS
<numberx> String type (string should be included in quotation marks)
phone number of format specified by <typex>
<typex>
Type of address octet in integer format (refer GSM04.08[8]
subclause 10.5.4.7)
<speed>
As defined by the +CBST Command
<service>
(service related to the phone number:)
0
Asynchronous modem
1
Synchronous modem
2
PAD Access (asynchronous)
3
Packet Access (synchronous)
4
Voice
5
Fax

Parameter Saving
Mode

NO_SAVE

Max
Time

Response

Reference
3GPP TS 27.007
[13]

Note

SIM800 Series_AT Command Manual_V1.02

96

2013-10-23

Smart Machine Smart Decision

3.2.44 AT+CPOL Preferred Operator List

AT+CPOL Preferred Operator List
Test Command
AT+CPOL=?

Response
+CPOL: (list of supported <index>s),(list of supported <format>s)
OK
Parameters
See Write Command

Read Command
AT+CPOL?

Response
+CPOL: <index1>,<format>,<oper1>
[<CR><LF>+CPOL: <index2>,<format>,<oper2>[]]
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
See Write Command

Write Command
AT+CPOL=<ind
ex>[,<format>,<o
per>]

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<index>
Integer type: order number of operator in SIM preferred
operator list
<format>
Indicates whether alphanumeric or numeric
format used (see +COPS Command)
0
Long format alphanumeric <oper>
1
Short format alphanumeric <oper>
2
Numeric <oper>
<oper>
String type(string should be included in quotation marks)

Parameter Saving
Mode

AUTO_SAVE

Max
Time

Response

Reference
3GPP TS 27.007
[13]
3.2.45 AT+COPN
AT+COPN

Note

Read Operator Names

Read Operator Names

Test Command
AT+COPN=?

Response
OK

SIM800 Series_AT Command Manual_V1.02

97

2013-10-23

Smart Machine Smart Decision

Execution
Command
AT+COPN

Response
+COPN: <numeric1>,<alpha1>
[<CR><LF>+COPN: <numeric2>,<alpha2>
[]]
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<numericn> String type (string should be included in quotation marks):
operator in numeric format (see +COPS)
<alphan>
String type (string should be included in quotation marks):
operator in long alphanumeric format (see +COPS)

Parameter Saving
Mode

NO_SAVE

Max
Time

Response

Reference
3GPP TS 27.007
[13]
3.2.46 AT+CFUN
AT+CFUN

Note

Set Phone Functionality

Set Phone Functionality

Test Command
AT+CFUN=?

Response
+CFUN: (list of supported <fun>s),(list of supported <rst>s)
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
See Write Command

Read Command
AT+CFUN?

Response
+CFUN: <fun>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
See Write Command

Write Command
AT+CFUN=<fun
>[,<rst>]

Response
OK
If error is related to ME functionality:

SIM800 Series_AT Command Manual_V1.02

98

2013-10-23

Smart Machine Smart Decision

+CME ERROR: <err>

Parameters
<fun>

<rst>

0
1
4
1

Parameter Saving
Mode

AUTO_SAVE

Max
Time

10s

Response

Reference
3GPP TS 27.007
[13]

3.2.47 AT+CCLK
AT+CCLK

Minimum functionality
Full functionality (Default)
Disable phone both transmit and receive RF circuits.
Reset the MT before setting it to <fun> power level.

Note
Minimum functionality mode (AT+CFUN=0)and RF disabled
functionality mode (AT+CFUN=4) cannot be switched to each other.
The <fun> power level will be written to flash except minimum
functionality.
AT+CFUN=1,1 can be used to reset module purposely at minimum/full
functionality mode.
Response string "OK" will be returned after module resets if baud rate is
set to fixed baud rate.
Clock

Clock

Test Command
AT+CCLK=?

Response
OK

Read Command
AT+CCLK?

Response
+CCLK: <time>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
See Write Command

Write Command
AT+CCLK=<tim
e>

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<time>
String type(string should be included in quotation marks)
value; format is "yy/MM/dd,hh:mm:sszz", where characters indicate
year (two last digits),month, day, hour, minutes, seconds and time zone
(indicates the difference, expressed in quarters of an hour, between the
local time and GMT; range -47...+48). E.g. 6th of May 2010, 00:01:52

SIM800 Series_AT Command Manual_V1.02

99

2013-10-23

Smart Machine Smart Decision

GMT+2 hours equals to "10/05/06,00:01:52+08".

Parameter Saving
Mode

AUTO_SAVE

Max
Time

Response

Reference
3GPP TS 27.007
[13]
3.2.48 AT+CSIM
AT+CSIM

Note
Only time zone is auto saved.

Generic SIM Access

Generic SIM Access

Test Command
AT+CSIM=?

Response
OK

Write Command
AT+CSIM=<leng
th>,<Command>

Response
+CSIM: <length>,<response>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<length>
Integer type: length of characters sent to the TE in
<Command> or <response> (i.e. twice the number of octets in the raw
data).
<Command>
String type(string should be included in quotation
marks): hex format: GSM 11.11 SIM Command sent from the ME to the
SIM.
<response>
String type(string should be included in quotation
marks): hex format: GSM 11.11 response from SIM to <Command>.

Parameter Saving
Mode

NO_SAVE

Max
Time

Response

Reference
3GPP TS 27.007
[13]
3.2.49 AT+CALM
AT+CALM

Note

Alert Sound Mode

Alert Sound Mode

Test Command
AT+CALM=?

Response
+CALM: (list of supported <mode>s)

SIM800 Series_AT Command Manual_V1.02

100

2013-10-23

Smart Machine Smart Decision

OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
See Write Command
Read Command
AT+CALM?

Response
+CALM: <mode>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
See Write Command

Write Command
AT+CALM=<mo
de>

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<mode>

Parameter Saving
Mode

NO_SAVE

Max
Time

Response

Reference
3GPP TS 27.007
[13]

3.2.50 AT+CALS
AT+CALS

0 Normal mode
1 Silent mode (all sounds from ME are prevented)

Note
If CALM is set to silent mode before, when user sets CALM to normal
mode during an incoming call, the module maintains silent this time. But
next time the normal mode works.
Alert Sound Select

Alert Sound Select

Test Command
AT+CALS=?

Response
+CALS: (list of supported <n>s)
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
See Write Command

Read Command

Response

SIM800 Series_AT Command Manual_V1.02

101

2013-10-23

Smart Machine Smart Decision

AT+CALS?

+CALS: <n>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
See Write Command

Write Command
AT+CALS=<n>

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<n>
0-19 Alert sound type

Parameter Saving
Mode

AT&W_SAVE

Max
Time

Response

Reference

Note

3.2.51 AT+CRSL Ringer Sound Level

AT+CRSL Ringer Sound Level
Test Command
AT+CRSL=?

Response
+CRSL: (list of supported <level>s)
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
See Write Command

Read Command
AT+CRSL?

Response
+CRSL: <level>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
See Write Command

Write Command
AT+CRSL=<leve
l>

Response
OK
If error is related to ME functionality:

SIM800 Series_AT Command Manual_V1.02

102

2013-10-23

Smart Machine Smart Decision

+CME ERROR: <err>

Parameter
<level>
Parameter
Mode
Max
Time

integer type value (0-100) with manufacturer specific range

Saving AUTO_SAVE
Response -

Reference
3GPP TS 27.007
[13]

Note

3.2.52 AT+CLVL Loud Speaker Volume Level

AT+CLVL Loud Speaker Volume Level
Test Command
AT+CLVL=?

Response
+CLVL: (list of supported <level>s)
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
See Write Command

Read Command
AT+CLVL?

Response
+CLVL: <level>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
See Write Command

Write Command
AT+CLVL=<leve
l>

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<level>
0-100 Integer type value with manufacturer specific range
(smallest value represents the lowest sound level).

Parameter
Mode
Max
Time

Saving AUTO_SAVE
Response -

Reference

Note

SIM800 Series_AT Command Manual_V1.02

103

2013-10-23

Smart Machine Smart Decision

3GPP TS 27.007
[13]
3.2.53 AT+CMUT Mute Control
AT+CMUT Mute Control
Test Command
AT+CMUT=?

Response
+CMUT: (list of supported <n>s)
OK
Parameter
See Write Command

Read Command
AT+CMUT?

Response
+CMUT: <n>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
See Write Command

Write Command
AT+CMUT=<n>

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<n>
0 Mute off
1 Mute on

Parameter Saving
Mode

NO_SAVE

Max
Time

Response

Reference
3GPP TS 27.007
[13]
3.2.54 AT+CPUC
AT+CPUC

Note
Only during a call this command can be set successfully.

Price Per Unit and Currency Table

Price Per Unit and Currency Table

Test Command
AT+CPUC=?

Response
OK

Read Command
AT+CPUC?

Response
+CPUC: <currency>,<ppu>

SIM800 Series_AT Command Manual_V1.02

104

2013-10-23

Smart Machine Smart Decision

OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
See Write Command
Write Command
AT+CPUC=<cur
rency>,<ppu>[,<
passwd>]

Response
OK
+CME ERROR: <err>

Parameter Saving
Mode

NO_SAVE

Max Response
Time

5s

Reference
3GPP TS 27.007
[13]

Note

3.2.55 AT+CCWE
AT+CCWE

Parameters
<currency> String type (string should be included in quotation marks);
three-character currency code (e.g. "GBP", "DEM");
character set as specified by Command Select TE
Character Set +CSCS
<ppu> String type (string should be included in quotation marks); price
per unit; dot is used as a decimal separator(e.g. "2.66")
<passwd>
String type (string should be included in quotation marks);
SIM PIN2

Call Meter Maximum Event

Call Meter Maximum Event

Test Command
AT+CCWE=?

Response
+CCWE: (list of supported <mode>s)
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
See Write Command

Read Command
AT+CCWE?

Response
+CCWE: <mode>
OK
If error is related to ME functionality:
+CME ERROR: <err>

SIM800 Series_AT Command Manual_V1.02

105

2013-10-23

Smart Machine Smart Decision

Parameter
See Write Command
Write Command
AT+CCWE=<m
ode>

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<mode>

0
1

Disable call meter warning event

Enable call meter warning event

Unsolicited result codes supported:

+CCWV
Shortly before the ACM (Accumulated Call Meter)
maximum value is reached, an unsolicited result code +CCWV will be
sent, if enabled by this command. The warning is issued approximately
when 5 seconds call time remains. It is also issued when starting a call if
less than 5 s call time remains.
Parameter Saving
Mode

NO_SAVE

Max
Time

Response

Reference
3GPP TS 27.007
[13]
3.2.56 AT+CBC
AT+CBC

Note
3GPP TS 27.007 specifies 30 seconds, so SIMCom deviates from the
specification.

Battery Charge

Battery Charge

Test Command
AT+CBC=?

Response
+CBC: (list of supported <bcs>s),(list of supported <bcl>s),(<voltage>)
OK
Parameters
See Execution Command

Execution
Command
AT+CBC

Response
+CBC: <bcs>, <bcl>,<voltage>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<bcs>

Charge status
0 ME is not charging
1 ME is charging
2 Charging has finished

SIM800 Series_AT Command Manual_V1.02

106

2013-10-23

Smart Machine Smart Decision

<bcl>
vent
<voltage>
Parameter Saving
Mode

NO_SAVE

Max
Time

Response

Reference
3GPP TS 27.007
[13]
3.2.57 AT+CUSD
AT+CUSD

Battery connection level

1...100 battery has 1-100 percent of capacity remaining
Battery voltage(mV)

Note
This command depends on hardware and only be used when battery is
charging.
Unstructured Supplementary Service Data

Unstructured Supplementary Service Data

Test Command
AT+CUSD=?

Response
+CUSD: (list of supported <n>s)
OK
Parameter
See Write Command

Read Command
AT+CUSD?

Response
+CUSD: <n>
OK
Parameter
See Write Command

Write Command
AT+CUSD=<n>[,
<str>[,<dcs>]]

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<n> A numeric parameter which indicates control of the unstructured
supplementary service data
0 disable the result code presentation in the TE
1 enable the result code presentation in the TE
2 cancel session (not applicable to read Command response)
<str>
String type (string should be included in quotation marks)
USSD-string
<dcs>
Cell Broadcast Data Coding Scheme in integer format
(default 0)

Parameter Saving
Mode

NO_SAVE

SIM800 Series_AT Command Manual_V1.02

107

2013-10-23

Smart Machine Smart Decision

Max
Time

Response

Reference
GSM 03.38 [25]
3.2.58 AT+CSSN
AT+CSSN

Note
When ussd is not suport or return error,TE will print +CUSD:4.
Supplementary Services Notification

Supplementary Services Notification

Test Command
AT+CSSN=?

Response
+CSSN: (list of supported <n>s),(list of supported <m>s)
OK
Parameters
See Write Command

Read Command
AT+CSSN?

Response
+CSSN: <n>,<m>
OK
Parameters
See Write Command

Write Command
AT+CSSN=<n>[,
<m>]

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<n> A numeric parameter which indicates whether to show the
+CSSI:<code1>[,<index>] result code presentation status after a mobile
originated call setup
0 disable
1
enable
<m>
A numeric parameter which indicates whether to show the
+CSSU:<code2> result code presentation status during a mobile
terminated call setup or during a call, or when a forward check
supplementary service notification is received.
0 disable
1
enable
<code1> 0
Unconditional call forwarding is active
1 Some of the conditional call forwarding are active
2 Call has been forwarded
3 Call is waiting
4 This is a CUG call (also <index> present)
5 Outgoing calls are barred
6
Incoming calls are barred
7 CLIR suppression rejected

SIM800 Series_AT Command Manual_V1.02

108

2013-10-23

Smart Machine Smart Decision

<index>
<code2>

Closed user group index

0
This is a forwarded call
1 This is a CUG call (also <index> present) (MT call

setup)
2 Call has been put on hold (during a voice call)
3 Call has been retrieved (during a voice call)
4 Multiparty call entered (during a voice call)
5
Call on hold has been released (this is not a SS
notification) (during a voice call)
6
Forward check SS message received (can be received
whenever)
7
Call is being connected (alerting) with the remote party
in alerting state in explicit call transfer operation (during a voice call)
8
Call has been connected with the other remote party in
explicit call transfer operation (also number and subaddress parameters
may be present) (during a voice call or MT call setup)
9
This is a deflected call (MT call setup)
Parameter Saving
Mode

NO_SAVE

Max
Time

Response

Reference

Note

SIM800 Series_AT Command Manual_V1.02

109

2013-10-23

Smart Machine Smart Decision

4 AT Commands According to 3GPP TS 27.005

The 3GPP TS 27.005 commands are for performing SMS and CBS related operations. SIM800
Series supports both Text and PDU modes.

4.1 Overview of AT Commands According to 3GPP TS 27.005

Command

Description

AT+CMGD

Delete SMS message

AT+CMGF

Select SMS message format

AT+CMGL

List SMS messages from preferred store

AT+CMGR

Read SMS message

AT+CMGS

Send SMS message

AT+CMGW

Write SMS message to memory

AT+CMSS

Send SMS message from storage

AT+CNMI

New SMS message indications

AT+CPMS

Preferred SMS message storage

AT+CRES

Restore SMS settings

AT+CSAS

Save SMS settings

AT+CSCA

SMS service center address

AT+CSCB

Select cell broadcast SMS messages

AT+CSDH

Show SMS text mode parameters

AT+CSMP

Set SMS text mode parameters

AT+CSMS

Select message service

4.2 Detailed Descriptions of AT Commands According to 3GPP TS 27.005

4.2.1 AT+CMGD
AT+CMGD

Delete SMS Message

Delete SMS Message

Test Command
AT+CMGD=?

Response
+CMGD: (list of supported <index>s),(list of supported <delflag>s)
OK
Parameters
See Write Command

Write Command
AT+CMGD=<in
dex>[,<delflag>]

Response
TA deletes message from preferred message storage <mem1> location
<index>.
OK

SIM800 Series_AT Command Manual_V1.02

110

2013-10-23

Smart Machine Smart Decision

ERROR
If error is related to ME functionality:
+CMS ERROR:<err>
Parameters
<index> Integer type; value in the range of location numbers supported by
the associated memory
<delflag> 0 Delete the message specified in <index>
1
Delete all read messages from preferred message storage,
leaving unread messages and stored mobile originated
messages (whether sent or not) untouched
2
Delete all read messages from preferred message storage
and sent mobile originated messages, leaving unread
messages and unsent mobile originated messages
untouched
3
Delete all read messages from preferred message storage,
sent and unsent mobile originated messages leaving
unread messages untouched
4
Delete all messages from preferred message storage
including unread messages
Parameter Saving NO_SAVE
Mode
Max
Time

Response 5sdelete 1 message

25sdelete 50 messages
25sdelete 150 messages

Reference
3GPP TS 27.005

Note

4.2.2 AT+CMGF Select SMS Message Format

AT+CMGF Select SMS Message Format
Test Command
AT+CMGF=?

Response
+CMGF: (list of supported <mode>s)
OK
Parameter
See Write Command

Read Command
AT+CMGF?

Response
+CMGF: <mode>
OK
Parameter
See Write Command

Write Command

Response

SIM800 Series_AT Command Manual_V1.02

111

2013-10-23

Smart Machine Smart Decision

AT+CMGF=[<m TA sets parameter to denote which input and output format of messages to
use.
ode>]
OK
Parameter
<mode>

0 PDU mode
1 Text mode

Parameter Saving AT&W_SAVE

Mode
Max
Time

Response -

Reference
3GPP TS 27.005

Note

4.2.3 AT+CMGL List SMS Messages from Preferred Store

AT+CMGL List SMS Messages from Preferred Store
Test Command
AT+CMGL=?

Response
+CMGL: (list of supported <stat>s)
OK
Parameter
See Write Command

Write Command Parameters

AT+CMGL=<sta 1) If text mode:
<stat>
"REC UNREAD" Received unread messages
t>[,<mode>]
"REC READ"
Received read messages
"STO UNSENT" Stored unsent messages
"STO SENT"
Stored sent messages
"ALL"
All messages
<mode>
0 Normal
1 Not change status of the specified SMS record
2) If PDU mode:
<stat>
0 Received unread messages
1 Received read messages
2 Stored unsent messages
3 Stored sent messages
4 All messages
<mode>
0 Normal
1 Not change status of the specified SMS record
Response
TA returns messages with status value <stat> from message storage
<mem1> to the TE. If status of the message is 'received unread', status in the
storage changes to 'received read'.

SIM800 Series_AT Command Manual_V1.02

112

2013-10-23

Smart Machine Smart Decision

1) If text mode (+CMGF=1) and Command successful:

for SMS-SUBMITs and/or SMS-DELIVERs:
+CMGL: <index>,<stat>,<oa/da>[,<alpha>] [,<scts>]
[,<tooa/toda>,<length>]<CR><LF><data>
[<CR><LF>+CMGL: <index>,<stat>,<da/oa>
[,<alpha>][,<scts>][,<tooa/toda>,<length>]<CR><LF><data>[...]]
for SMS-STATUS-REPORTs:
+CMGL: <index>,<stat>,<fo>,<mr>[,<ra>][,<tora>],<scts>,<dt>,<st>
[<CR><LF>+CMGL: <index>,<stat>,<fo>,<mr>
[,<ra>][,<tora>],<scts>,<dt>,<st>[...]]
for SMS-COMMANDs:
+CMGL: <index>,<stat>,<fo>,<ct>[<CR><LF>
+CMGL: <index>,<stat>,<fo>,<ct>[...]]
for CBM storage:
+CMGL:<index>,<stat>,<sn>,<mid>,<page>,<pages>
<CR><LF><data>
<CR><LF>+CMGL: <index>,<stat>,<sn>,<mid>,<page>,<pages>
<CR><LF><data>[...]]
OK
2) If PDU mode (+CMGF=0) and Command successful:
+CMGL:<index>,<stat>[,<alpha>],<length>
<CR><LF><pdu><CR><LF>
+CMGL: <index>,<stat>[,alpha],<length>
<CR><LF><pdu>[...]]
OK
3)If error is related to ME functionality:
+CMS ERROR: <err>
Parameters
<alpha>
String type(string should be included in quotation marks)
alphanumeric representation of <da> or <oa> corresponding to the entry
found in MT phonebook; implementation of this feature is manufacturer
specific; used character set should be the one selected with Command Select
TE Character Set +CSCS (see definition of this Command in 3GPP TS
27.007)
<da>
GSM 03.40 TP-Destination-Address Address-Value field in
string format; BCD numbers (or GSM default alphabet characters) are
converted to characters of the currently selected TE character set (refer
Command+CSCS in 3GPP TS 27.007); type of address given by <toda>
<data>
In the case of SMS: GSM 03.40 TP-User-Data in text mode
responses; format:
- if <dcs> indicates that GSM 03.38 default alphabet is used and

SIM800 Series_AT Command Manual_V1.02

113

2013-10-23

Smart Machine Smart Decision

<fo> indicates that GSM 03.40 TPUser-Data-Header-Indication

is not set:
- if TE character set other than "HEX" (refer Command Select
TE Character Set +CSCS in 3GPP TS 27.007):ME/TA converts
GSM alphabet into current TE character set according to rules
of Annex A
- if TE character set is "HEX": ME/TA converts each 7-bit
character of GSM alphabet into two IRA character long
hexadecimal number (e.g. character P (GSM 23) is presented as
17 (IRA 49 and 55))
- if <dcs> indicates that 8-bit or UCS2 data coding scheme is
used, or <fo> indicates that GSM 03.40
TP-User-Data-Header-Indication is set: ME/TA converts each
8-bit octet into two IRA character long hexadecimal number
(e.g. octet with integer value 42 is presented to TE as two
characters 2A (IRA 50 and 65)) In the case of CBS: GSM 03.41
CBM Content of Message in text mode responses; format:
- if <dcs> indicates that GSM 03.38 default alphabet is used:
- if TE character set other than "HEX" (refer Command +CSCS
in 3GPP TS 27.007): ME/TA converts GSM alphabet into
current TE character set according to rules of Annex A
- if TE character set is "HEX": ME/TA converts each 7-bit
character of GSM alphabet into two IRA character long
hexadecimal number
- if <dcs> indicates that 8-bit or UCS2 data coding scheme is
used: ME/TA converts each 8-bit octet into two IRA character
long hexadecimal number
<length>
Integer type value indicating in the text mode (+CMGF=1)
the length of the message body <data> (or <cdata>) in characters; or in
PDU mode (+CMGF=0), the length of the actual TP data unit in octets (i.e.
the RP layer SMSC address octets are not counted in the length)
<index>
Integer type; value in the range of location numbers supported
by the associated memory
<oa>
GSM 03.40 TP-Originating-Address Address-Value field in
string format; BCD numbers (or GSM default alphabet characters) are
converted to characters of the currently selected TE character set (refer
Command +CSCS in 3GPP TS 27.007); type of address given by <tooa>
<pdu>
In the case of SMS: GSM 04.11 SC address followed by
GSM 03.40 TPDU in hexadecimal format: ME/TA converts each octet of
TP data unit into two IRA character long hexadecimal number (e.g. octet
with integer value 42 is presented to TE as two characters 2A (IRA 50 and
65)). In the case of CBS: GSM 03.41 TPDU in hexadecimal format.
<scts>
GSM 03.40 TP-Service-Center-Time-Stamp in time-string
format (refer <dt>)

SIM800 Series_AT Command Manual_V1.02

114

2013-10-23

Smart Machine Smart Decision

<toda>
GSM 04.11 TP-Destination-Address Type-of-Address octet
in integer format (when first character of <da> is + (IRA 43) default is 145,
otherwise default is 129)
<tooa>
GSM 04.11 TP-Originating-Address Type-of-Address octet in
integer format (default refer<toda>)
Execution
Command
AT+CMGL

1) If text mode:
the same as AT+CMGL="REC UNREAD", received unread messages
2) If PDU mode:
the same as AT+CMGL=0, received unread messages
See more messages please refer to Write Command.
Parameters
See Write Command

Parameter Saving NO_SAVE

Mode
Max
Time

Response 20s(list 50 messages)

20s(list 150 messages)

Reference
3GPP TS 27.005
4.2.4 AT+CMGR
AT+CMGR

Note

Read SMS Message

Read SMS Message

Test Command
AT+CMGR=?

Response
OK

Write Command
AT+CMGR=<in
dex>[,<mode>]

Parameters
<index>
Integer type; value in the range of location numbers supported
by the associated memory
<mode>
0 Normal
1 Not change status of the specified SMS record
Response
TA returns SMS message with location value <index> from message storage
<mem1> to the TE. If status of the message is 'received unread', status in the
storage changes to 'received read'.
1) If text mode (+CMGF=1) and Command successful:
for SMS-DELIVER:
+CMGR: <stat>,<oa>[,<alpha>],<scts>[,<tooa>,<fo>,<pid>,<dcs>
,<sca>,<tosca>,<length>]<CR><LF><data>
for SMS-SUBMIT:
+CMGR: <stat>,<da>[,<alpha>][,<toda>,<fo>,<pid>,<dcs>[,<vp>]
,<sca>,<tosca>,<length>]<CR><LF><data>
for SMS-STATUS-REPORTs:

SIM800 Series_AT Command Manual_V1.02

115

2013-10-23

Smart Machine Smart Decision

+CMGR: <stat>,<fo>,<mr>[,<ra>][,<tora>],<scts>,<dt>,<st>
for SMS-COMMANDs:
+CMGR: <stat>,<fo>,<ct>[,<pid>[,<mn>][,<da>][,<toda>]
,<length><CR><LF><cdata>]
for CBM storage:
+CMGR: <stat>,<sn>,<mid>,<dcs>,<page>,<pages><CR><LF><data>
2) If PDU mode (+CMGF=0) and Command successful:
+CMGR: <stat>[,<alpha>],<length><CR><LF><pdu>
OK
3) If error is related to ME functionality:
+CMS ERROR: <err>
Parameters
<alpha>
String type (string should be included in quotation marks)
alphanumeric representation of <da> or <oa> corresponding to the entry
found in MT phonebook; implementation of this feature is manufacturer
specific
<da>
GSM 03.40 TP-Destination-Address Address-Value field in
string format; BCD numbers (or GSM default alphabet characters) are
converted to characters of the currently selected TE character set (specified
by +CSCS in 3GPP TS 27.007); type of address given by <toda>
<data>
In the case of SMS: GSM 03.40 TP-User-Data in text mode
responses; format:
- if <dcs> indicates that GSM 03.38 default alphabet is used and
<fo> indicates that GSM 03.40 TPUser-Data-Header-Indication
is not set:
- if TE character set other than "HEX" (refer Command Select
TE Character Set +CSCS in 3GPP TS 27.007):ME/TA converts
GSM alphabet into current TE character set according to rules
of Annex A
- if TE character set is "HEX": ME/TA converts each 7-bit
character of GSM alphabet into two IRA character long
hexadecimal number (e.g. character P (GSM 23) is presented as
17 (IRA 49 and 55))
- if <dcs> indicates that 8-bit or UCS2 data coding scheme is
used, or <fo> indicates that GSM 03.40
TP-User-Data-Header-Indication is set: ME/TA converts each
8-bit octet into two IRA character long hexadecimal number
(e.g. octet with integer value 42 is presented to TE as two
characters 2A (IRA 50 and 65)) In the case of CBS: GSM 03.41
CBM Content of Message in text mode responses; format:
- if <dcs> indicates that GSM 03.38 default alphabet is used:
- if TE character set other than "HEX" (refer Command +CSCS
in 3GPP TS 27.007): ME/TA converts GSM alphabet into

SIM800 Series_AT Command Manual_V1.02

116

2013-10-23

Smart Machine Smart Decision

current TE character set according to rules of Annex A

- if TE character set is "HEX": ME/TA converts each 7-bit
character of GSM alphabet into two IRA character long
hexadecimal number
- if <dcs> indicates that 8-bit or UCS2 data coding scheme is
used: ME/TA converts each 8-bit octet into two IRA character
long hexadecimal number
<dcs>
Depending on the Command or result code: GSM 03.38 SMS
Data Coding Scheme (default 0), or Cell Broadcast Data Coding Scheme in
integer format
<fo>
Depending on the Command or result code: first octet of
GSM 03.40 SMS-DELIVER, SMS-SUBMIT (default 17),
SMS-STATUS-REPORT, or SMS-COMMAND (default 2) in integer
format
<length>
integer type value indicating in the text mode (+CMGF=1)
the length of the message body <data> (or <cdata>) in characters; or in
PDU mode (+CMGF=0), the length of the actual TP data unit in octets (i.e.
the RP layer SMSC address octets are not counted in the length)
<mid>
GSM 03.41 CBM Message Identifier in integer format
<oa>
GSM 03.40 TP-Originating-Address Address-Value field in
string format; BCD numbers (or GSM default alphabet characters) are
converted characters of the currently selected TE character set (specified by
+CSCS in 3GPP TS 27.007); type of address given by <tooa>
<pdu>
In the case of SMS: GSM 04.11 SC address followed by
GSM 03.40 TPDU in hexadecimal format: ME/TA converts each octet of
TP data unit into two IRA character long hexadecimal number (e.g. octet
with integer value 42 is presented to TE as two characters 2A (IRA 50 and
65)). In the case of CBS: GSM 03.41 TPDU in hexadecimal format.
<pid>
GSM 03.40 TP-Protocol-Identifier in integer format
(default 0)
<sca>
GSM 04.11 RP SC address Address-Value field in string
format; BCD numbers (or GSM default alphabet characters) are converted
to characters of the currently selected TE character set (specified by +CSCS
in 3GPP TS 27.007); type of address given by <tosca>
<scts>
GSM 03.40 TP-Service-Centre-Time-Stamp in time-string
format (refer <dt>)
<stat>
0 "REC UNREAD"
Received unread messages
1 "REC READ"
Received read messages
2 "STO UNSENT"
Stored unsent messages
3 "STO SENT"
Stored sent messages
4 "ALL"
All messages
<toda>
GSM 04.11 TP-Destination-Address Type-of-Address octet
in integer format (when first character of <da> is + (IRA 43) default is 145,
otherwise default is 129)

SIM800 Series_AT Command Manual_V1.02

117

2013-10-23

Smart Machine Smart Decision

<tooa>
GSM 04.11 TP-Originating-Address Type-of-Address octet
in integer format (default refer<toda>)
<tosca>
GSM 04.11 RP SC address Type-of-Address octet in integer
format (default refer <toda>)
<vp>
Depending on SMS-SUBMIT <fo> setting: GSM 03.40
TP-Validity-Period either in integer format (default 167) or in time-string
format (refer <dt>)
Parameter Saving NO_SAVE
Mode
Max
Time

Response 5s

Reference
3GPP TS 27.005
4.2.5 AT+CMGS
AT+CMGS

Note

Send SMS Message

Send SMS Message

Test Command
AT+CMGS=?

Response
OK

Write Command
1) If text mode
(+CMGF=1):
+CMGS=<da>[,
<toda>]
<CR>text
is
entered
<ctrl-Z/ESC>
ESC quits without
sending

Parameters
<da>
GSM 03.40 TP-Destination-Address Address-Value field in
string format(string should be included in quotation marks); BCD numbers
(or GSM default alphabet characters) are converted to characters of the
currently selected TE character set (specified by +CSCS in 3GPP TS
27.007); type of address given by <toda>
<toda>
GSM 04.11 TP-Destination-Address Type-of-Address octet
in integer format (when first character of <da> is + (IRA 43) default is 145,
otherwise default is 129)
<length>
Integer type value (not exceed 160 bytes) indicating in the
text mode (+CMGF=1) the length of the message body <data> (or
2) If PDU mode <cdata>) in characters; or in PDU mode (+CMGF=0), the length of the
(+CMGF=0):
actual TP data unit in octets (i.e. the RP layer SMSC address octets are not
+CMGS=<length counted in the length)
>
Response
<CR>PDU is
TA sends message from a TE to the network (SMS-SUBMIT). Message
given
reference value <mr> is returned to the TE on successful message delivery.
<ctrl-Z/ESC>
Optionally (when +CSMS <service> value is 1 and network supports)
<scts> is returned. Values can be used to identify message upon unsolicited
delivery status report result code.
1) If text mode(+CMGF=1) and sending successful:
+CMGS: <mr>
OK
2) If PDU mode(+CMGF=0) and sending successful:

SIM800 Series_AT Command Manual_V1.02

118

2013-10-23

Smart Machine Smart Decision

+CMGS: <mr>
OK
3)If error is related to ME functionality:
+CMS ERROR: <err>
Parameter
<mr>
GSM 03.40 TP-Message-Reference in integer format
Parameter Saving NO_SAVE
Mode
Max
Time

Response 60s

Reference
3GPP TS 27.005

Note
z In text mode, the maximum length of an SMS depends on the used
coding scheme: It is 1024 characters if the 7 bit GSM coding scheme is
used.
z Reject incoming call when sending messages.

4.2.6 AT+CMGW Write SMS Message to Memory

AT+CMGW Write SMS Message to Memory
Test Command
AT+CMGW=?

Response
OK

Write Command
1) If text mode
(+CMGF=1):
AT+CMGW=<o
a/da>[,<tooa/tod
a>][,<stat>]
<CR> text is
entered
<ctrl-Z/ESC>
<ESC> quits
without sending

Response
TA transmits SMS message (either SMS-DELIVER or SMS-SUBMIT)
from TE to memory storage <mem2>. Memory location <index> of the
stored message is returned. By default message status will be set to 'stored
unsent', but parameter <stat> allows also other status values to be given.

2) If PDU mode
(+CMGF=0):
AT+CMGW=<le
ngth>[,<stat>]
<CR>PDU is
given
<ctrl-Z/ESC>

Parameters
<oa>
GSM 03.40 TP-Originating-Address Address-Value field in
string format(string should be included in quotation marks); BCD numbers
(or GSM default alphabet characters) are converted to characters of the
currently selected TE character set (specified by +CSCS in 3GPP TS
27.007);type of address given by <tooa>
<da>
GSM 03.40 TP-Destination-Address Address-Value field in
string format(string should be included in quotation marks); BCD numbers
(or GSM default alphabet characters) are converted to characters of the
currently selected TE character set (specified by +CSCS in 3GPP TS

If writing is successful:
+CMGW: <index>
OK
If error is related to ME functionality:
+CMS ERROR: <err>

SIM800 Series_AT Command Manual_V1.02

119

2013-10-23

Smart Machine Smart Decision

27.007); type of address given by <toda>

<tooa>
GSM 04.11 TP-Originating-Address Type-of-Address octet
in integer format (default refer <toda>)
<toda> GSM 04.11 TP-Destination-Address Type-of-Address octet in
integer format (when first character of <da> is + (IRA 43) default is 145,
otherwise default is 129)
129 Unknown type(IDSN format number)
161 National number type(IDSN format)
145 International number type(ISDN format)
177 Network specific number(ISDN format)
<length>
Integer type value (not exceed 160 bytes) indicating in the
text mode (+CMGF=1) the length of the message body <data> (or
<cdata>) in characters;
or in PDU mode (+CMGF=0), the length of the actual TP
data unit in octets (i.e. the RP layer SMSC address octets are
not counted in the length)
<stat>
in the text mode (+CMGF=1):
"STO UNSENT" Stored unsent messages
"STO SENT"
Stored sent messages
in PDU mode (+CMGF=0):
0 Received unread messages
1 Received read messages
2 Stored unsent messages
3 Stored sent messages
<pdu>
In the case of SMS: GSM 04.11 SC address followed by
GSM 03.40 TPDU in hexadecimal format: ME/TA converts each octet of
TP data unit into two IRA character long hexadecimal number (e.g. octet
with integer value 42 is presented to TE as two characters 2A (IRA 50 and
65)). In the case of CBS: GSM 03.41 TPDU in hexadecimal format.
<index>
Index of message in selected storage <mem2>
Execution
Command
AT+CMGW

Response
TA transmits SMS message (either SMS-DELIVER or SMS-SUBMIT)
from TE to memory storage <mem2>. Memory location <index> of the
stored message is returned. By default message status will be set to 'stored
unsent', but parameter <stat> allows also other status values to be given.
If writing is successful:
+CMGW: <index>
OK
If error is related to ME functionality:
+CMS ERROR: <err>

Parameter Saving NO_SAVE

Mode

SIM800 Series_AT Command Manual_V1.02

120

2013-10-23

Smart Machine Smart Decision

Max
Time

Response 5s

Reference
3GPP TS 27.005
4.2.7 AT+CMSS
AT+CMSS

Note

Send SMS Message from Storage

Send SMS Message from Storage

Test Command
AT+CMSS=?

Response
OK

Write Command
AT+CMSS=<ind
ex>[,<da>,<toda
>]

Response
TA sends message with location value <index> from message storage
<mem2> to the network (SMS-SUBMIT). If new recipient address <da> is
given, it shall be used instead of the one stored with the message. Reference
value <mr> is returned to the TE on successful message delivery. Values can
be used to identify message upon unsolicited delivery status report result
code.
1) If text mode(+CMGF=1) and sending successful:
+CMSS: <mr>
OK
2) If PDU mode(+CMGF=0) and sending successful:
+CMSS: <mr>
OK
3)If error is related to ME functionality:
+CMS ERROR: <err>
Parameters
<index>
Integer type; value in the range of location numbers supported
by the associated memory
<da>
GSM 03.40 TP-Destination-Address Address-Value field in
string format(string should be included in quotation marks); BCD numbers
(or GSM default alphabet characters) are converted to characters of the
currently selected TE character set (specified by +CSCS in 3GPP TS
27.007); type of address given by <toda>
<toda>
GSM 04.11 TP-Destination-Address Type-of-Address octet
in integer format (when first character of <da> is + (IRA 43) default is 145,
otherwise default is 129)
<mr>
GSM 03.40 TP-Message-Reference in integer format

Parameter Saving NO_SAVE

Mode
Max
Time

Response 60s

Reference

Note

SIM800 Series_AT Command Manual_V1.02

121

2013-10-23

Smart Machine Smart Decision

3GPP TS 27.005
4.2.8 AT+CNMI
AT+CNMI

New SMS Message Indications

New SMS Message Indications

Test Command
AT+CNMI=?

Response
+CNMI: (list of supported <mode>s),(list of supported <mt>s),(list of
supported <bm>s),(list of supported <ds>s),(list of supported <bfr>s)
OK
Parameters
See Write Command

Read Command
AT+CNMI?

Response
+CNMI: <mode>,<mt>,<bm>,<ds>,<bfr>
OK
Parameters
See Write Command

Write Command
AT+CNMI=<mo
de>[,<mt>[,<bm
>[,<ds>[,<bfr>]]]
]

Response
TA selects the procedure for how the receiving of new messages from the
network is indicated to the TE when TE is active, e.g. DTR signal is ON. If
TE is inactive (e.g. DTR signal is OFF), message receiving should be done
as specified in GSM 03.38.
OK
ERROR
Parameters
<mode>
0
Buffer unsolicited result codes in the TA. If TA result
code buffer is full, indications can be buffered in some other place or the
oldest indications may be discarded and replaced with the new received
indications.
1
Discard indication and reject new received message
unsolicited result codes when TA-TE link is reserved (e.g. in on-line data
mode). Otherwise forward them directly to the TE.
2
Buffer unsolicited result codes in the TA when TA-TE
link is reserved (e.g. in on-line data mode) and flush them to the TE after
reservation. Otherwise forward them directly to the TE.
3
Forward unsolicited result codes directly to the TE.
TA-TE link specific inband technique used to embed result codes and data
when TA is in on-line data mode.
<mt>
(the rules for storing received SMs depend on its data coding
scheme (refer GSM 03.38 [2]), preferred memory storage (+CPMS) setting
and this value):
0
No SMS-DELIVER indications are routed to the TE.

SIM800 Series_AT Command Manual_V1.02

122

2013-10-23

Smart Machine Smart Decision

1
If SMS-DELIVER is stored into ME/TA, indication of
the memory location is routed to the TE using unsolicited result code:
+CMTI: <mem>,<index>
2
SMS-DELIVERs (except class 2) are routed directly to
the TE using unsolicited result code: +CMT:
[<alpha>],<length><CR><LF><pdu> (PDU mode enabled) or +CMT:
<oa>, [<alpha>],<scts>
[,<tooa>,<fo>,<pid>,<dcs>,<sca>,<tosca>,<length>]<CR><LF><data>
(text mode enabled; about parameters in italics, refer Command Show Text
Mode Parameters +CSDH). Class 2 messages result in indication as defined
in <mt>=1.
3
Class 3 SMS-DELIVERs are routed directly to TE
using unsolicited result codes defined in <mt>=2. Messages
of other classes result in indication as defined in <mt>=1.
<bm>
(the rules for storing received CBMs depend on its data
coding scheme (refer GSM 03.38 [2]), the setting of Select CBM Types
(+CSCB) and this value):
0
No CBM indications are routed to the TE.
2
New CBMs are routed directly to the TE using
unsolicited result code: +CBM: <length><CR><LF><pdu> (PDU mode
enabled) or
+CBM:
<sn>,<mid>,<dcs>,<page>,<pages><CR><LF><data>
(text mode enabled).
<ds>
0
No SMS-STATUS-REPORTs are routed to the TE.
1
SMS-STATUS-REPORTs are routed to the TE using
unsolicited result code: +CDS:
<length><CR><LF><pdu> (PDU mode enabled) or
+CDS: <fo>,<mr>[,<ra>][,<tora>],<scts>,<dt>,<st>
(text mode enabled)
<bfr>
0
TA buffer of unsolicited result codes defined within this
Command is flushed to the TE when <mode> 1...3 is entered (OK response
shall be given before flushing the codes).
1
TA buffer of unsolicited result codes defined within
this command is cleared when <mode> 13 is entered
Unsolicited result code
1. Indicates that new message has been received
If <mt>=1:
+CMTI: <mem3>, <index>
If <mt>=2 (PDU mode enabled):
+CMT: <length><CR><LF><pdu>
If <mt>=2 (text mode enabled):
+CMT: <oa>, <scts>[, <tooa>, <fo>, <pid>, <dcs>, <sca>, <tosca>,
<length>]<CR><LF><data>

SIM800 Series_AT Command Manual_V1.02

123

2013-10-23

Smart Machine Smart Decision

2. Indicates that new cell broadcast message has been received

If <bm>=2 (PDU mode enabled):
+CBM: <length><CR><LF><pdu>
If <bm>=2 (text mode enabled):
+CBM: <sn>, <mid>, <dcs>, <page>, <pages><CR><LF><data>
3. Indicates that new SMS status report has been received
If <ds>=1 (PDU mode enabled):
+CDS: <length><CR><LF><pdu>
If <ds>=1 (text mode enabled):
+CDS: <fo>, <mr>[, <ra>][, <tora>], <scts>, <dt>, <st>
Parameter Saving AT&W_SAVE
Mode
Max
Time

Response -

Reference
3GPP TS 27.005
4.2.9 AT+CPMS
AT+CPMS

Note

Preferred SMS Message Storage

Preferred SMS Message Storage

Test Command
AT+CPMS=?

Response
+CPMS: (list of supported <mem1>s),(list of supported <mem2>s),(list of
supported <mem3>s)
OK
Parameters
See Write Command

Read Command
AT+CPMS?

Response
+CPMS: <mem1>,<used1>,<total1>,<mem2>,<used2>,<total2>,
<mem3>,<used3>,<total3>
OK
ERROR
Parameters
See Write Command

Write Command
AT+CPMS=
<mem1>[,<mem
2>[,<mem3>]]

Response
TA selects memory storages <mem1>, <mem2> and <mem3> to be used for
reading, writing, etc.
+CPMS: <used1>,<total1>,<used2>,<total2>,<used3>,<total3>
OK

SIM800 Series_AT Command Manual_V1.02

124

2013-10-23

Smart Machine Smart Decision

ERROR
Parameters
<mem1>

Messages to be read and deleted from this memory storage

"SM"
SIM message storage
"ME" Phone message storage
"SM_P" SM message storage preferred
"ME_P" ME message storage preferred
"MT" SM or ME message storage ( SM preferred)
<mem2>
Messages will be written and sent to this memory storage
"SM"
SIM message storage
"ME" Phone message storage
"SM_P" SM message storage preferred
"ME_P" ME message storage preferred
"MT" SM or ME message storage ( SM preferred)
<mem3>
Received messages will be placed in this memory storage if
routing to PC is not set ("+CNMI")
"SM"
SIM message storage
"ME" Phone message storage
"SM_P" SM message storage preferred
"ME_P" ME message storage preferred
"MT" SM or ME message storage ( SM preferred)
<usedx>
Integer type; Number of messages currently in <memx>
<totalx>
Integer type; Number of messages storable in <memx>
Parameter Saving NO_SAVE
Mode
Max
Time

Response -

Reference
3GPP TS 27.005
4.2.10 AT+CRES
AT+CRES

Note

Restore SMS Settings

Restore SMS Settings

Test Command
AT+CRES=?

Response
+CRES: (list of supported <profile>s)
OK
Parameter
See Write Command

Write Command Response

AT+CRES=<pro Execution command restores message service settings from non-volatile
memory to active memory. A TA can contain several profiles of settings.
file>
Settings specified in commands Service Centre Address +CSCA and Set
Message Parameters +CSMP are restored. Certain settings may not be
SIM800 Series_AT Command Manual_V1.02

125

2013-10-23

Smart Machine Smart Decision

supported by the storage (e.g. (U)SIM SMS parameters) and therefore can
not be restored.
OK
ERROR
Parameter
<profile>

Execution
Command
AT+CRES

0 Restore SM service settings from profile 0

1 Restore SM service settings from profile 1
2 Restore SM service settings from profile 2
3 Restore SM service settings from profile 3

Response
Same as AT+CRES=0.
OK
If error is related to ME functionality:
+CMS ERROR <err>

Parameter Saving NO_SAVE

Mode
Max
Time

Response 5s

Reference
3GPP TS 27.005
4.2.11 AT+CSAS
AT+CSAS

Note

Save SMS Settings

Save SMS Settings

Test Command
AT+CSAS=?

Response
+CSAS: (list of supported <profile>s)
OK
Parameter
See Write Command

Write Command Response

AT+CSAS=<prof Execution command saves active message service settings to a non-volatile
memory. Settings specified in commands Service Centre Address +CSCA
ile>
and Set Message Parameters +CSMP are saved. Certain settings may not be
supported by the storage (e.g. (U)SIM SMS parameters) and therefore can
not be saved.
OK
ERROR
Parameter
<profile>

0
1
2
3

Save SM service setting in profile 0

Save SM service setting in profile 1
Save SM service setting in profile 2
Save SM service setting in profile 3

SIM800 Series_AT Command Manual_V1.02

126

2013-10-23

Smart Machine Smart Decision

Execution
Command
AT+CSAS

Response
Same as AT+CSAS=0
OK
If error is related to ME functionality:
+CMS ERROR <err>

Parameter Saving NO_SAVE

Mode
Max
Time

Response 5s

Reference
3GPP TS 27.005

Note

4.2.12 AT+CSCA SMS Service Center Address

AT+CSCA SMS Service Center Address
Test Command
AT+CSCA=?

Response
OK

Read Command
AT+CSCA?

Response
+CSCA: <sca>,<tosca>[,<scaAlpha>]
OK
Parameters
See Write Command

Write Command
AT+CSCA=
<sca>[,<tosca>]

Response
TA updates the SMSC address, through which mobile originated SMS are
transmitted. In text mode, setting is used by send and writes commands. In
PDU mode, setting is used by the same commands, but only when the
length of the SMSC address coded into <pdu> parameter equals zero.
Note: The Command writes the parameters in NON-VOLATILE memory.
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<sca>
GSM 04.11 RP SC address Address-Value field in string
format(string should be included in quotation marks); BCD numbers (or
GSM default alphabet characters) are converted to characters of the
currently selected TE character set (specified by +CSCS in 3GPP TS
27.007); type of address given by <tosca>
<tosca>
Service center address format GSM 04.11 RP SC address
Type-of-Address octet in integer format (default refer <toda>)
<scaAlpha>
String type(string should be included in quotation

SIM800 Series_AT Command Manual_V1.02

127

2013-10-23

Smart Machine Smart Decision

marks)
Service center address alpha data
Parameter Saving NO_SAVE
Mode
Max
Time

Response 5s

Reference
3GPP TS 27.005
4.2.13 AT+CSCB
AT+CSCB

Note

Select Cell Broadcast SMS Messages

Select Cell Broadcast SMS Messages

Test Command
AT+CSCB=?

Response
+CSCB: (list of supported <mode>s)
OK
Parameter
See Write Command

Read Command
AT+CSCB?

Response
+CSCB: <mode>,<mids>,<dcss>
OK
Parameters
See Write Command

Write Command
AT+CSCB=<mo
de>[,<mids>[,<d
css>]]

Response
TA selects which types of CBMs are to be received by the ME.
Note: The Command writes the parameters in NON-VOLATILE memory.
OK
If error is related to ME functionality:
+CMS ERROR: <err>
Parameters
<mode>
accepted

Message types specified in <mids> and <dcss> are

Message types specified in <mids> and <dcss> are not

accepted.
<mids>
String type (string should be included in quotation marks); all
different possible combinations of CBM message identifiers (refer <mid>)
(default is empty string); e.g. "0,1,5,320,922". Total 15 different <mids>
values can be supported. <mids> values cannot be written consecutively,
such as "100-200"
<dcss>
String type(string should be included in quotation marks); all
different possible combinations of CBM data coding schemes (refer <dcs>)

SIM800 Series_AT Command Manual_V1.02

128

2013-10-23

Smart Machine Smart Decision

(default is empty string); e.g. "0,5". Total 5 different <dcss> values can be
supported. <dcss> values cannot be written consecutively, such as "0-5".
Parameter Saving NO_SAVE
Mode
Max
Time

Response -

Reference
3GPP TS 27.005

4.2.14 AT+CSDH
AT+CSDH

Note
AT+CSCB=0 will reset <mids> and <dcss> and select no <mids> and no
<dcss>.
AT+CSCB=1 means all <dcss> are accepted but this command has no effect
on the list of the <mids> accepted. "0-255" means all <dcss> are accepted.
AT+CSCB=0, <mids> will add the <mids> values in the <mids> current list
handled by module.
AT+CSCB=0, ,<dcss> will add the <dcss> values in the <dcss> current list
handled by module.
If AT+CSCB=0, <mids> is received while the list of <mids> is full, OK is
returned and new value is not added.
Show SMS Text Mode Parameters

Show SMS Text Mode Parameters

Test Command
AT+CSDH=?

Response
+CSDH: (list of supported <show>s)
OK
Parameter
See Write Command

Read Command
AT+CSDH?

Response
+CSDH: <show>
OK
Parameter
See Write Command

Write Command
AT+CSDH=[<sh
ow>]

Response
TA determines whether detailed header information is shown in text mode
result codes.
OK
Parameter
<show>
0 Do not show header values defined in commands +CSCA
and +CSMP (<sca>, <tosca>, <fo>, <vp>, <pid> and <dcs>) nor <length>,
<toda> or <tooa> in +CMT, +CMGL, +CMGR result codes for
SMS-DELIVERs and SMS-SUBMITs in text mode
1
Show the values in result codes

SIM800 Series_AT Command Manual_V1.02

129

2013-10-23

Smart Machine Smart Decision

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference
3GPP TS 27.005

Note

4.2.15 AT+CSMP Set SMS Text Mode Parameters

AT+CSMP Set SMS Text Mode Parameters
Test Command
AT+CSMP=?

Response
+CSMP: (list of supported <fo>s),(list of supported <vp>s),(list of
supported <pid>s),(list of supported <dcs>s)
OK
Parameters
See Write Command

Read Command
AT+CSMP?

Response
+CSMP: <fo>,<vp>,<pid>,<dcs>
OK
Parameters
See Write Command

Write Command
AT+CSMP=[<fo
>[,<vp>,<pid>,<
dcs>]]

Response
TA selects values for additional parameters needed when SM is sent to the
network or placed in a storage when text mode is selected (+CMGF=1). It is
possible to set the validity period starting from when the SM is received by
the SMSC (<vp> is in range 0... 255) or define the absolute time of the
validity period termination (<vp> is a string).
Note: The Command writes the parameters in NON-VOLATILE memory.
OK
Parameters
<fo>
Depending on the command or result code: first octet of GSM
03.40 SMS-DELIVER, SMS-SUBMIT (default 17),
SMS-STATUS-REPORT, or SMS-COMMAND (default 2) in integer
format. SMS status report is supported under text mode if <fo> is set to 49.
<vp>
Depending on SMS-SUBMIT <fo> setting: GSM 03.40
TP-Validity-Period either in integer format (default 167) or in time-string
format (refer <dt>)
<pid>
GSM 03.40 TP-Protocol-Identifier in integer format (default 0).
<dcs>
GSM 03.38 SMS Data Coding Scheme in Integer format.

Parameter Saving NO_SAVE

SIM800 Series_AT Command Manual_V1.02

130

2013-10-23

Smart Machine Smart Decision

Mode
Max
Time

Response -

Reference
3GPP TS 27.005
4.2.16 AT+CSMS
AT+CSMS

Note

Select Message Service

Select Message Service

Test Command
AT+CSMS=?

Response
+CSMS: (list of supported <service>s)
OK
Parameter
See Write Command

Read Command
AT+CSMS?

Response
+CSMS: <service>,<mt>,<mo>,<bm>
OK
Parameters
See Write Command

Write Command
AT+CSMS=
<service>

Response
+CSMS: <mt>,<mo>,<bm>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<service>
0 GSM 03.40 and 03.41 (the syntax of SMS AT commands
is compatible with 3GPP TS 27.005 Phase 2 version 4.7.0; Phase 2+
features which do not require new Command syntax may be supported (e.g.
correct routing of messages with new Phase 2+ data coding schemes))
1
GSM 03.40 and 03.41 (the syntax of SMS AT
commands is compatible with 3GPP TS 27.005 Phase 2+
version; the requirement of <service> setting 1 is
mentioned under corresponding command descriptions)
<mt>
Mobile Terminated Messages:
0 Type not supported
1 Type supported
<mo>
Mobile Originated Messages:
0 Type not supported
1 Type supported
<bm>
Broadcast Type Messages:

SIM800 Series_AT Command Manual_V1.02

131

2013-10-23

Smart Machine Smart Decision

0
1

Type not supported

Type supported

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference
3GPP TS 27.005

Note

SIM800 Series_AT Command Manual_V1.02

132

2013-10-23

Smart Machine Smart Decision

5 AT Commands for SIM Application Toolkit

5.1 Overview
Command

Description

AT+STKTRS

This command is used to send STK terminal response

AT+STKENVS

This command is used to send STK envelope command

AT+STKCALL

Trigger STK call

AT+STKSMS

Trigger STK SMS

AT+STKSS

Trigger STK SS

AT+STKUSSD

Trigger STK USSD

AT+STKDTMF

Trigger STK DTMF

+STKPCI

This unsolicited result code is used to indicate proactive command

Indication.

AT+STKMENU

Show STK main menu

AT+STKPCIS

Switch STK URC string

5.2 Detailed Descriptions of Commands

5.2.1 AT+STKTRS
AT+STKTRS

STK Terminal Response

STK Terminal Response.

Test Command
AT+STKTRS=?

Response
+STKTRS: <result_length>,<text_length>
OK
Parameter
See Write Command

Read Command
AT+STKTRS?

Response
OK

Write Command
Response
AT+STKTRS=<re OK
sult>[,<text>]
ERROR

SIM800 Series_AT Command Manual_V1.02

133

2013-10-23

Smart Machine Smart Decision

Parameter
<result> HEX String --specified in GSM11.14[12.12]
- '00' = Command performed successfully;
- '10' = Proactive SIM session terminated by the user;
- '11' = Backward move in the proactive SIM session requested by
the user;

- '2000' = ME currently unable to process command, No specific

cause can be given;
- '2001' = ME currently unable to process command, Screen is
busy;

<text> Hex String

If response to GET INPUT or GET INKEY
--specified in
GSM11.14[12.15]
-text string, the first 2 char is Data coding scheme
If response to SELECT ITEM --specified in GSM11.134[12.10]
-Identifier of item chosen
Parameter
Mode
Max
Time

Saving NO_SAVE
Response -

Reference

Note
For more detail used, can refer AT+STKTR command

5.2.2 AT+STKENVS
AT+STKENVS

Test Command

STK Envelope Command

STK Envelope Command

Response

AT+STKENVS=? +STKENVS: <command_length>,<data_length>

OK
Parameter
See Write Command
Read Command
AT+STKENVS?

Response
OK
Parameter
See Write Command

Write Command
Response
AT+STKENVS=< OK
command>[,<data ERROR

SIM800 Series_AT Command Manual_V1.02

134

2013-10-23

Smart Machine Smart Decision

Parameter
<command> HEX String --specified in GSM11.14[13.1]
- 'D3' = Menu Selection;
- 'D6' =Event download;
<data> Hex String
If command is D3 --specified in GSM11.14[8.2]
-Item identifier of main menu
If command is D6 --specified in GSM11.14[11]
-event list
- '04' = User activity
- '05' = Idle screen available
- '07' = Language selection

>]

Parameter
Mode
Max
Time

Saving NO_SAVE
Response -

Reference

Note
For more detail used, can refer AT+STKENV command

5.2.3 AT+STKCALL STK call setup

AT+STKCALL

STK call setup

Test Command
AT+STKCALL=?

Response
OK
Parameter
See Write Command

Write Command
AT+STKCALL=<
command>

Parameter
Mode

Response
OK
ERROR
Parameter
<command > stk call command
0
(Trigger modem to send STK CALLSETUP)
4
(Trigger modem to send STK CALLSETUP but icon cannot
be displayed)
16
(Proactive session terminated by user)
18
(No response from user)
32
(ME currently unable to process this command)
34
(User reject setup call)
50
(Command data not understood by ME)
Note: Above are the possible terminal response value needed to be
responded by application. Its modems responsibility to response for other
terminal response value

Saving NO_SAVE

SIM800 Series_AT Command Manual_V1.02

135

2013-10-23

Smart Machine Smart Decision

Max Response Time Reference

Note
According to spec 11.14 , 0x12 (No response from user) is not a possible
terminal response value for STK CALLSETUP. So we will translate
0x12(No response from user) to 0x20 (ME currently unable to process
this command) .

5.2.4 AT+STKSMS

STK SMS delivery

AT+STKSMS

STK SMS delivery

Test Command
AT+STKSMS=?

Response
OK
Parameter
See Write Command

Write Command
Response
AT+STKSMS=<co OK
mmand>
ERROR
Parameter
<command >
0
4
displayed)
Parameter
Mode

stk sms command

(Trigger modem to send STK SMS)
(Trigger modem to send STK SMS but icon cannot be

Saving NO_SAVE

Max Response Time Reference

Note
Above are the possible terminal response value needed to be responded
by application. Its modems responsibility to response for other terminal
response value

5.2.5 AT+STKSS
AT+STKSS

STK SS setup

STK SS setup

Test Command
AT+STKSS=?

Response
OK
Parameter
See Write Command

Write Command
Response
AT+STKSS=<com OK
mand>
ERROR
Parameter
<command >
0
4

stk ss command
(Trigger modem to send STK SS)
(Trigger modem to send STK SS but icon cannot be

SIM800 Series_AT Command Manual_V1.02

136

2013-10-23

Smart Machine Smart Decision

displayed)
50
Parameter
Mode

(Command data not understood by ME)

Saving NO_SAVE

Max Response Time Reference

Note
Above are the possible terminal response value needed to be responded
by application. Its modems responsibility to response for other terminal
response value.

5.2.6 AT+STKUSSD
AT+STKUSSD

STK USSD setup

STK USSD setup

Test Command
AT+STKUSSD=?

Response
OK
Parameter
See Write Command

Write Command
Response
AT+STKUSSD=<c OK
ommand>
ERROR
Parameter
<command >
0
4
displayed)
50
Parameter
Mode

stk ss command
(Trigger modem to send STK USSD)
(Trigger modem to send STK USSD but icon cannot be
(Command data not understood by ME)

Saving NO_SAVE

Max Response Time Reference

Note
Above are the possible terminal response value needed to be responded by
application.Its modems responsibility to response for other terminal
response value.

5.2.7 AT+STKDTMF STK sending DTMF

AT+STKDTMF

STK sending DTMF

Test Command
Response
AT+STKDTMF=? OK
Write Command
Response
AT+STKDTMF=< OK
command>
ERROR
Parameter

SIM800 Series_AT Command Manual_V1.02

137

2013-10-23

Smart Machine Smart Decision

<command > stk DTMF command

0
(Trigger modem to send STK DTMF)
4
(Trigger modem to send STK DTMF but icon cannot be
displayed)
32
(ME currently unable to process command)
Parameter
Mode

Saving NO_SAVE

Max Response Time Reference

Note
Above are the possible terminal response value needed to be responded by
application.Its modems responsibility to response for other terminal
response value.

5.2.8 +STKPCI
+STKPCI

STK Proactive Command Indication

STK Proactive Command Indication

+STKPCI: < pci_type > [,<proactive_command>,]
Parameter
<pci_type>
-0 The SAT command is handled by TE.
-1 The SAT command is handled by ME.
-2 No other command (end of session)
<proactive command>
-DISPLAY TEXT,<Command Qualifier>,<text string>
-GET INKEY, <Command Qualifier>,<text string>
-GET INPUT, <Command Qualifier>,<text string>,<Min length>,<Max
length>
-PLAY TONE,<alpha id>,<tone>,< Time unit >,< Time interval>
-SET UP MENU,<the number of item >,<alpha id>
-SELECT ITEM, <the number of item >,<alpha id>
-ITEM,<index>,<id>,<item string>
-SEND SHORT MESSAGE,<alpha id>,<addr>,<sms tpdu>
-SEND SS,<alpha id>,<ss string>
-SEND USSD,<alpha id>,<ussd string>
-SETUP CALL,<alpha id>,<addr>
-SET UP IDLE MODE TEXT,<text string>
-SEND DTMF,<alpha id>,<dtmf string>.
If <alpha id> = 0, the alpha id is null
If <addr> = 0, the addr is null

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

SIM800 Series_AT Command Manual_V1.02

138

2013-10-23

Smart Machine Smart Decision

Reference

Note
For detail introduce, pleas refer to SIM800 Series_STK_Application Note.doc.

5.2.9 AT+STKMENU

STK Main menu command

AT+STKMENU

STK Main menu command

Test Command
AT+STKMENU
=?

Response
OK

Read Command
AT+STKMENU
?

Response
[+STKMENU:<index>,<id>,<text>]
[+STKMENU:<index>,<id>,<text>]
[+STKMENU:<index>,<id>,<text>]
[]
OK
Parameter
<index>: the menus index, begin 1
<id>: the item identifier
<text>: the content of item, code by EFADN

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note
When stkpci is off, read command response will null

5.2.10 AT+STKPCIS
AT+STKPCIS

STK URC switch command

STK URC switch command

Test Command
Response
AT+STKPCIS=? +STKPCIS: (0-1)
OK
Parameter
Read Command
AT+STKPCIS?

Response
+STKPCIS: <switch>
OK
Parameter

Write Command Response

AT+STKPCIS=< OK
switch>
ERROR

SIM800 Series_AT Command Manual_V1.02

139

2013-10-23

Smart Machine Smart Decision

Parameter
<switch>: the switch of STK URC
-0 the STK URC is off
-1 the STK URC is ON
Parameter Saving AT&W_SAVE
Mode
Max
Time

Response -

Reference

Note

SIM800 Series_AT Command Manual_V1.02

140

2013-10-23

Smart Machine Smart Decision

6 AT Commands Special for SIMCom

6.1 Overview
Command

Description

AT+SIDET

Change the side tone gain level

AT+CPOWD

Power off

AT+SPIC

Times remained to input SIM PIN/PUK

AT+CMIC

Change the microphone gain level

AT+CALA

Set alarm time

AT+CALD

Delete alarm

AT+CADC

Read ADC

AT+CSNS

Single numbering scheme

AT+CDSCB

Reset cell broadcast

AT+CMOD

Configure alternating mode calls

AT+CFGRI

Indicate RI when using URC

AT+CLTS

Get local timestamp

AT+CLDTMF

Local DTMF tone generation

AT+CDRIND

CS voice/data call termination indication

AT+CSPN

Get service provider name from SIM

AT+CCVM

Get and set the voice mail number on the SIM

AT+CBAND

Get and set mobile operation band

AT+CHF

Configure hands free operation

AT+CHFA

Swap the audio channels

AT+CSCLK

Configure slow clock

AT+CENG

Switch on or off engineering mode

AT+SCLASS0

Store class 0 SMS to SIM when received class 0 SMS

AT+CCID

Show ICCID

AT+CMTE

Set critical temperature operating mode or query temperature

AT+CMGDA

Delete all SMS

AT+STTONE

Play SIM toolkit tone

AT+SIMTONE

Generate specific tone

AT+CCPD

Enable or disable alpha string

AT+CGID

Get SIM card group identifier

AT+MORING

Show state of mobile originated call

AT+CMGHEX

Enable or disable sending non-ascii character SMS

AT+CCODE

Configure SMS code mode

AT+CIURC

Enable or disable initial URC presentation

SIM800 Series_AT Command Manual_V1.02

141

2013-10-23

Smart Machine Smart Decision

AT+CPSPWD

Change PS super password

AT+EXUNSOL

Enable or disable proprietary unsolicited indications

AT+CGMSCLASS

Change GPRS multislot class

AT+CDEVICE

View current flash device type

AT+CCALR

Call ready query

AT+GSV

Display product identification information

AT+SGPIO

Control the GPIO

AT+SPWM

Generate the pulse-width-modulation

AT+ECHO

Echo cancellation control

AT+CAAS

Control auto audio switch

AT+SVR

Configure voice coding type for voice calls

AT+GSMBUSY

Reject incoming call

AT+CEMNL

Set the list of emergency number

AT*CELLLOCK

Set the list of ARFCN which needs to be locked

AT+SLEDS

Set the timer period of net light

AT+CBUZZERRING

Use the buzzer sound as the incoming call ring

AT+CEXTERNTONE

Close or open the microphone

AT+CNETLIGHT

Close the net light or open it to shining

AT+CWHITELIST

Set the white list

AT+CSGS

Netlight indication of GPRS status

AT+CMICBIAS

Close or open the MICBIAS

AT+DTAM

Set TTS and record play mode in call

AT+SJDR

Set jamming detection fuction

AT+CPCMCFG

Set PCM parameter

AT+CPCMSYNC

Set PCM sync parameter

AT+CANT

Antenna detecting

AT+CAGCSET

Close or open AGC function

6.2 Detailed Descriptions of Commands

6.2.1 AT+SIDET

Change the Side Tone Gain Level

AT+SIDET Change the Side Tone Gain Level

Test Command
AT+SIDET=?

Response
+SIDET: (list of supported <channel>s),(list of supported <gainlevel>s)
OK
Parameters
See Write Command

SIM800 Series_AT Command Manual_V1.02

142

2013-10-23

Smart Machine Smart Decision

Read Command
AT+SIDET?

Response
+SIDET: (<channel0>,<gainlevel0>),, (<channeln>,<gainleveln>)
OK
Parameters
See Write Command

Write Command
AT+SIDET=<ch
annel>,<gainleve
l>

Response
OK
ERROR
Parameters
<channel>

0 Main audio channel

1 Aux audio channel
<gainlevel> Int: 0 16
Parameter Saving AUTO_SAVE
Mode
Max
Time

Response -

Reference

Note
Please refer to actual model for channel number.
<gainleveln> value of read command is related to <channel> specific.

6.2.2 AT+CPOWD
AT+CPOWD
Write Command
AT+CPOWD=
<n>

Power off

Power Off
Response
[NORMAL POWER DOWN]
Parameter
<n>
0
DOWN)
1
DOWN)

Power off urgently (Will not send out NORMAL POWER

Normal power off

(Will send out NORMAL POWER

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note

6.2.3 AT+SPIC
AT+SPIC
Execution
Command
AT+SPIC

Times Remained to Input SIM PIN/PUK

Times Remained to Input SIM PIN/PUK

Response
Times remained to input SIM PIN
+SPIC: <pin1>,<pin2>,<puk1>,<puk2>

SIM800 Series_AT Command Manual_V1.02

143

2013-10-23

Smart Machine Smart Decision

OK
Parameters
<pin1>
<pin2>
<puk1>
<puk2>

Times remained to input chv1

Times remained to input chv2
Times remained to input puk1
Times remained to input puk2

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note

6.2.4 AT+CMIC
AT+CMIC

Change the Microphone Gain Level

Change the Microphone Gain Level

Test Command
AT+CMIC=?

Response
+CMIC: (list of supported <channel>s),(list of supported <gainlevel>s)
OK
Parameters
See Write Command

Read Command
AT+CMIC?

Response
+CMIC: (<channel0>,<gainlevel0>),,(<channeln>,<gainleveln>)
OK
Parameters
See Write Command

Write Command
AT+CMIC=<cha
nnel>,<gainlevel
>

Response
OK
ERROR
Parameters
<channel> 0 Main audio channel
1 Aux audio channel
<gainlevel> Int: 0 15
0 0dB
1 +1.5dB
2 +3.0 dB
3 +4.5 dB
4 +6.0 dB
5 +7.5 dB
6 +9.0 dB

SIM800 Series_AT Command Manual_V1.02

144

2013-10-23

Smart Machine Smart Decision

7 +10.5 dB
8 +12.0 dB
9 +13.5 dB
10 +15.0 dB
11 +16.5 dB
12 +18.0 dB
13 +19.5 dB
14 +21.0 dB
15 +22.5 dB
Parameter Saving AUTO_SAVE
Mode
Max
Time

Response -

Reference

6.2.5 AT+CALA

Note
z Please refer to actual model for channel number.
z <gainleveln> value is related to <channel> specific.
z The default gain level of main audio channel is 10, the default gain
level of aux audio channel is 11.
Set Alarm Time

AT+CALA Set Alarm Time

Test Command
AT+CALA=?

Response
+CALA: ("yy/mm/dd,hh:mm:ss","hh:mm:ss"),(1-5),(0-7)
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
See Write Command

Read Command
AT+CALA?

Response
[+CALA: <time>,<n1>[,<recurr>]
[<CR><LF> +CALA: <time>,<n2>[,<recurr>] ] ]
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
See Write Command

Write Command
AT+CALA=<ti
me>[,<n>
[,<recurr>]]

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Unsolicited Result Code

SIM800 Series_AT Command Manual_V1.02

145

2013-10-23

Smart Machine Smart Decision

Indicate the index of expired alarm.

+CALV: <n>
Parameters
<time>
A string parameter(string should be included in quotation marks)
which indicates the time when alarm arrives. The format is
"yy/MM/dd,hh:mm:ss" where characters indicate the last two digits of year,
month, day, hour, minute, second.
<n>
Index of the alarm (range 1 to 5 for now).
<recurr> "0", "1"---"7" String type value indicating day of week for the
alarm in one of the following formats:
"<1..7>[,<1..7>[]]" Set a recurrent alarm for one or more
days in the week. The digits 1 to 7 correspond to the days in the
week, Monday (1), , Sunday (7).
Example: The string "1,2,3,4,5" may be used to set an alarm for
all weekdays.
"0" Set a recurrent alarm for all days in the week.
Parameter
Saving Mode
Max
Time

AUTO_SAVE

Response -

Reference

Note
If user sets recurr function, the string of <time> should not enter "yy/MM/dd",
for example: set Monday to Friday alarm at the time of 16PM of alarm 2.
AT+CALA="16:00:00",2,1,2,3,4,5

6.2.6 AT+CALD
AT+CALD

Delete Alarm

Delete Alarm

Test Command
AT+CALD=?

Response
+CALD: (list of supported <n>s)
OK
Parameter
See Write Command

Write Command
AT+CALD=<n>

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<n>
Integer type value indicating the index of the alarm; default
is manufacturer specific (range from 1 to 5 now).

Parameter Saving NO_SAVE

Mode

SIM800 Series_AT Command Manual_V1.02

146

2013-10-23

Smart Machine Smart Decision

Max
Time

Response -

Reference

Note

6.2.7 AT+CADC
AT+CADC

Read ADC

Read ADC

Test Command
AT+CADC=?

Response
+CADC: (list of supported <status>s),(list of supported <value>s)
OK
Parameters
<status>
<value>

Read Command
AT+CADC?

1 Success
0 Fail
Integer 0-2800

Response
+CADC: <status>,<value>
OK
Parameters
See Test Command

Parameter Saving NO_SAVE

Mode
Max
Time

Response 2s

Reference

Note

6.2.8 AT+CSNS
AT+CSNS

Single Numbering Scheme

Single Numbering Scheme

Test Command
AT+CSNS=?

Response
+CSNS: (list of supported <mode>s)
OK
Parameter
See Write Command

Read Command
AT+CSNS?

Response
+CSNS: <mode>
OK
Parameter
See Write Command

SIM800 Series_AT Command Manual_V1.02

147

2013-10-23

Smart Machine Smart Decision

Write Command
AT+CSNS=<mo
de>

Response
OK
ERROR
Parameter
<mode>
0
2
4

Voice
Fax
Data

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note

6.2.9 AT+CDSCB
AT+CDSCB

Reset Cell Broadcast

Reset Cell Broadcast

Execution
Command
AT+CDSCB

Response
OK

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note
Please also refer to AT+CSCB.

6.2.10 AT+CMOD
AT+CMOD

Configure Alternating Mode Calls

Configure Alternating Mode Calls

Test Command
AT+CMOD=?

Response
+CMOD: (0)
OK
Parameter
See Write Command

Read Command
AT+CMOD?

Response
+CMOD: <mode>
OK
Parameter
See Write Command

SIM800 Series_AT Command Manual_V1.02

148

2013-10-23

Smart Machine Smart Decision

Write Command Response

AT+CMOD=[<m OK
ode>]
ERROR
Parameter
<mode>

Only single mode is supported

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note

6.2.11 AT+CFGRI
AT+CFGRI

Indicate RI When Using URC

Indicate RI When Using URC

Test Command
AT+CFGRI=?

Response
+CFGRI: (0,1)
OK
Parameter
See Write Command

Read Command
AT+CFGRI?

Response
+CFGRI: <status>
OK
Parameter
See Write Command

Write Command
AT+CFGRI=<st
atus>

Response
OK
ERROR
Parameter
<status>

1 On
0 Off

Parameter Saving AT&W_SAVE

Mode
Max
Time

Response -

Reference

Note

6.2.12 AT+CLTS
AT+CLTS

Get Local Timestamp

Get Local Timestamp

SIM800 Series_AT Command Manual_V1.02

149

2013-10-23

Smart Machine Smart Decision

Test Command
AT+CLTS=?

Response
+CLTS: "yy/MM/dd,hh:mm:ss+/-zz"
OK

Read Command
AT+CLTS?

Response
+CLTS: <mode>
OK

Write Command
AT+CLTS=<mo
de>

Response
OK
ERROR
Parameter
<mode>
0
1

Disable
Enable

Unsolicited Result Code

When "get local timestamp" function is enabled, the following URC may
be reported if network sends the message to the MS to provide the MS
with subscriber specific information.
1. Refresh network name by network:
*PSNWID: "<mcc>", "<mnc>", "<full network name>", <full
network name CI>, "<short network name>",<short network name
CI>
2. Refresh time and time zone by network:
This is UTC time, the time queried by AT+CCLK command is local
time.
*PSUTTZ: <year>, <month>, <day>, <hour>, <min>, <sec>, "<time
zone>", <dst>
3. Refresh network time zone by network:
+CTZV: "<time zone>"
4. Refresh Network Daylight Saving Time by network:
DST: <dst>
Parameters
<mcc>
String type; mobile country code
<mnc>
String type; mobile network code
<full network name> String type; name of the network in full length.
<full network name CI> Integer type; indicates whether to add CI.
0
The MS will not add the initial letters of the Country's

SIM800 Series_AT Command Manual_V1.02

150

2013-10-23

Smart Machine Smart Decision

Name to the text string.

1
The MS will add the initial letters of the Country's
Name and a separator (e.g. a space) to the text string.
<short network name> String type; abbreviated name of the network
<short network name CI> Integer type; indicates whether to add CI.
0
The MS will not add the initial letters of the Country's
Name to the text string.
1
The MS will add the initial letters of the Country's
Name and a separator (e.g. a space) to the text string.
<year>
4 digits of year (from network)
<month>
Month (from network)
<day>
Day (from network)
<hour>
Hour (from network)
<min>
Minute (from network)
<sec>
Second (from network)
<time zone> String type; network time zone. If the network time zone
has been adjusted for Daylight Saving Time, the network shall indicate
this by including the <dst> (Network Daylight Saving Time)
<dst>
Network Daylight Saving Time; the content of this
indicates the value that used to adjust the network time zone
0 No adjustment for Daylight Saving Time
1 +1 hour adjustment for Daylight Saving
2 +2 hours adjustment for Daylight Saving Time
3 Reserved
Parameter Saving
Mode

AT&W_SAVE

Max
Time

Response

Reference

6.2.13 AT+CLDTMF

Note
Support for this Command will be network dependent.
Set AT+CLTS=1, it means user can receive network time updating
and use AT+CCLK to show current time.
Local DTMF Tone Generation

AT+CLDTMF Local DTMF Tone Generation

Test Command
AT+CLDTMF=?

Response
+CLDTMF: (1-100),(0-9,A,B,C,D,*,#)
OK

Write Command
AT+CLDTMF=<
n>,<DTMF
string>

Response
OK
ERROR
Parameters

SIM800 Series_AT Command Manual_V1.02

151

2013-10-23

Smart Machine Smart Decision

<n>
A numeric parameter(1-100) which indicates the duration of all
DTMF tones in <DTMF -string> in 1/10 secs
<DTMF -string>
A string parameter (string should be included in
quotation marks) which has a max length of 20 chars of form <DTMF>,
separated by commas.
<DTMF>
A single ASCII chars in the set 0-9,#,*,A-D.
Execution
Command
AT+CLDTMF

Response
OK
Abort any DTMF tone currently being generated and any DTMF tone
sequence.

Parameter Saving
Mode

NO_SAVE

Max
Time

Response

Reference

Note

6.2.14 AT+CDRIND
AT+CDRIND

CS Voice/Data Call Termination Indication

CS Voice/Data Call Termination Indication

Test Command
AT+CDRIND=?

Response
+CDRIND: (list of supported <n>s)
OK
Parameter
See Write Command

Read Command
AT+CDRIND?

Response
+CDRIND: <n>
OK
Parameter
See Write Command

Write Command
AT+CDRIND=<
n>

Response
OK
ERROR
Parameter
<n> A numeric parameter to enable an unsolicited event code indicating
whether a CS voice call, CS data has been terminated.
0 Disable
1 Enable
Unsolicited result code
When enabled, an unsolicited result code is returned after the connection
has been terminated

SIM800 Series_AT Command Manual_V1.02

152

2013-10-23

Smart Machine Smart Decision

+CDRIND: <type>
Parameter
<type>
Connection type
0 CSV connection
1 CSD connection
2 PPP connection
Parameter Saving
Mode

NO_SAVE

Max
Time

Response

Reference

Note

6.2.15 AT+CSPN
AT+CSPN

Get Service Provider Name from SIM

Get Service Provider Name from SIM

Read Command
AT+CSPN?

Response
+CSPN: <spn>,<display mode>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<spn>
String type(string should be included in quotation
marks); service provider name on SIM
<display mode>
0 Not display PLMN. Already registered on PLMN
1 Display PLMN

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note
CME errors occur if SIM is not inserted.

6.2.16 AT+CCVM
AT+CCVM

Get and Set the Voice Mail Number on the SIM

Get and Set the Voice Mail Number on the SIM

Test Command
AT+CCVM=?

Response
+CCVM: maximum length of field <vm number>, maximum length of
field <alpha string>
OK
Parameters
See Write Command

SIM800 Series_AT Command Manual_V1.02

153

2013-10-23

Smart Machine Smart Decision

Read Command
AT+CCVM?

Response
If voice mail number is not set:
OK
If voice mail number is set:
+CCVM: <vm number>[,<alpha string>]
OK
Parameters
See Write Command

Write Command
AT+CCVM=<vm
number>[,<alpha
string>]

Response
OK
ERROR
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<vm number>
<alpha string>

Parameter
Mode
Max
Time

String type,The voice mail number to write to the SIM

String type,The alpha-string to write to the SIM

Saving AUTO_SAVE
Response -

Reference

Note

6.2.17 AT+CBAND
AT+CBAND

Get and Set Mobile Operation Band

Get and Set Mobile Operation Band

Test Command
AT+CBAND=?

Response
+CBAND: (list of supported <op_band>s)
OK
Parameter
See Write Command

Read Command
AT+CBAND?

Response
+CBAND: <op_band>[,<ALL_BAND>]
OK
Parameter
See Write Command

Write Command
AT+CBAND=<o
p_band>

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>

SIM800 Series_AT Command Manual_V1.02

154

2013-10-23

Smart Machine Smart Decision

Parameter
<op_band>

A string parameter which indicate the operation band.

And the following strings should be included in quotation

marks.
EGSM_MODE
PGSM_MODE
DCS_MODE
GSM850_MODE
PCS_MODE
EGSM_DCS_MODE
GSM850_PCS_MODE
EGSM_PCS_MODE
ALL_BAND
Parameter Saving AUTO_SAVE
Mode
Max
Time

Response -

Reference

Note
Radio settings are stored in non-volatile memory.

6.2.18 AT+CHF Configure Hands Free Operation

AT+CHF Configure Hands Free Operation
Test Command
AT+CHF=?

Response
+CHF: (list of supported <ind>s),(list of supported <state>s)
OK
Parameters
See Write Command

Read Command
AT+CHF?

Response
+CHF: <ind>,<state>
OK
Parameters
See Write Command

Write Command Response

AT+CHF=<ind> OK
[,<state>]
ERROR
If error is related to ME functionality:
+CME ERROR: <err>
Unsolicited Result Code
+CHF: <state>

SIM800 Series_AT Command Manual_V1.02

155

2013-10-23

Smart Machine Smart Decision

Parameters
<ind>
0 Unsolicited result code disabled
1 Unsolicited result code enabled
(non-volatile)
<state>
0 Main audio channel
1 Aux audio channel
2
Main audio channel hand free mode
3
Aux audio channel hand free mode
4
PCM channel
Parameter Saving AT&W_SAVE
Mode
Max
Time

Response -

Reference

Note
This command is related to the actual module, <state> dont support power
off save
PCM channel is only supported by SIM800H&SIM800L.

6.2.19 AT+CHFA Swap the Audio Channels

AT+CHFA Swap the Audio Channels
Test Command
AT+CHFA=?

Response
+CHFA:
(0
=
NORMAL_AUDIO,
1
=
AUX_AUDIO,2
=HANDFREE_AUDIO,
3
=AUX_HANDFREE_AUDIO,
4=PCM_AUDIO)
OK

Read Command
AT+CHFA?

Response
+CHFA: <n>
OK
Parameter
See Write Command

Write Command
AT+CHFA=<n>

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<n>
0 Main audio channel
1 Aux audio channel
2 Main audio channel hand free mode
3 Aux audio channel hand free mode
4
PCM channel

SIM800 Series_AT Command Manual_V1.02

156

2013-10-23

Smart Machine Smart Decision

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note
z This Command swaps the audio channels among different channels.
z This command is related to the actual module.
z Main audio channel hand free mode is the same with main audio
channel; aux audio channel hand free mode is the same with aux audio
channel. Channel 2, 3 is virtual channel.

6.2.20 AT+CSCLK
AT+CSCLK

Configure Slow Clock

Configure Slow Clock

Test Command
AT+CSCLK=?

Response
+CSCLK: (list of supported <n>s)
OK
Parameter
See Write Command

Read Command
AT+CSCLK?

Response
+CSCLK: <n>
OK
Parameter
See Write Command

Write Command
AT+CSCLK=<n
>

Response
OK
ERROR
Parameter
<n>
0 Disable slow clock, module will not enter sleep mode.
1 Enable slow clock, it is controlled by DTR. When DTR is high,
module can enter sleep mode. When DTR changes to low
level, module can quit sleep mode.
2 Enable slow clock automatically. When there is no interrupt
(on air and hardware such as GPIO interrupt or data in serial
port), module can enter sleep mode. Otherwise, it will quit
sleep mode.

Parameter Saving AT&W_SAVE

Mode
Max
Time

Response -

Reference

Note

SIM800 Series_AT Command Manual_V1.02

157

2013-10-23

Smart Machine Smart Decision

There are two caveats when you want to quit sleep mode in mode 2:
1, You should input some characters (at least one) to awake module
2, An interval time of 100ms more is necessary between waking characters
and following AT commands,otherwise the waking characters will not be
discarded completely,and messy codes will be produced which may leads to
UART baudrate re-adaptation.
6.2.21 AT+CENG Switch On or Off Engineering Mode
AT+CENG Switch On or Off Engineering Mode
Test Command
AT+CENG=?

Response
TA returns the list of supported modes.
+CENG: (list of supported <mode>s),(list of supported <Ncell>s)
OK
Parameters
See Write Command

Read Command
AT+CENG?

Response
Engineering Mode is designed to allow a field engineer to view and test the
network information received by a handset, when the handset is either in
idle mode or dedicated mode (that is: with a call active). In each mode, the
engineer is able to view network interaction for the "serving cell" (the cell
the handset is currently registered with) or for the neighboring cells.
TA returns the current engineering mode. The network information
including serving cell and neighboring cells are returned only when
<mode>=1 or <mode> = 2. <cell> carry with them corresponding network
interaction.
+CENG: <mode>,<Ncell>
[+CENG:
<cell>,"<arfcn>,<rxl>,<rxq>,<mcc>,<mnc>,<bsic>,<cellid>,<rla>,
<txp>,<lac>,<TA>"
<CR><LF>+CENG:
<cell>,"<arfcn>,<rxl>,<bsic>[,<cellid>,]<mcc>,<mnc>,<lac>"]
OK
if <mode>=3
+CENG: <mode>,<Ncell>
[+CENG: <cell>,<mcc>,<mnc>,<lac>,<cellid>,<bsic>,<rxl>
<CR><LF>+CENG: <cell>,<mcc>,<mnc>,<lac>,<cellid>,

SIM800 Series_AT Command Manual_V1.02

158

2013-10-23

Smart Machine Smart Decision

<bsic>,<rxl>]
OK
Parameters
See Write Command
Write Command Response
AT+CENG=<mo Switch on or off engineering mode. It will report +CENG: (network
information) automatically if <mode>=2.
de>[,<Ncell>]
OK
ERROR
Parameters
<mode>

<Ncell>

<cell>
<arfcn>
<rxl>
<rxq>
<mcc>
<mnc>
<bsic>
<cellid>
<lac>
<rla>
<txp>
<TA>

0
1
2

Switch off engineering mode

Switch on engineering mode
Switch on engineering mode, and activate the
URC report of network information
3 Switch on engineering mode, with limited URC report
0 Un-display neighbor cell ID
1 Display neighbor cell ID
If <mode> =3, ignore this parameter.
0
The serving cell
1-6 The index of the neighboring cell
Absolute radio frequency channel number
Receive level
Receive quality
Mobile country code
Mobile network code
Base station identity code
Cell id
Location area code
Receive level access minimum
Transmit power maximum CCCH
Timing Advance

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note

6.2.22 AT+SCLASS0
AT+SCLASS0

Store Class 0 SMS to SIM When Received Class 0 SMS

Store Class 0 SMS to SIM When Module Received Class 0 SMS

Test Command
Response
AT+SCLASS0=? +SCLASS0: (0, 1)
SIM800 Series_AT Command Manual_V1.02

159

2013-10-23

Smart Machine Smart Decision

OK
Parameter
See Write Command
Read Command
AT+SCLASS0?

Response
+SCLASS0: <mode>
OK
Parameter
See Write Command

Write Command Response

AT+SCLASS0=< OK
mode>
ERROR
Parameter
<mode>
0 Disable to store Class 0 SMS to SIM when module receives
Class 0 SMS
1 Enable to store Class 0 SMS to SIM when module receives
Class 0 SMS
Parameter Saving NO_SAVE
Mode
Max
Time

Response -

Reference

Note

6.2.23 AT+CCID
AT+CCID

Show ICCID

Show ICCID

Test Command
AT+CCID =?

Response
OK

Execution
Command
AT+CCID

Response
Ccid data [ex. 898600810906F8048812]
OK

Parameter Saving NO_SAVE

Mode
Max
Time

Response 2s

Reference

Note

SIM800 Series_AT Command Manual_V1.02

160

2013-10-23

Smart Machine Smart Decision

6.2.24 AT+CMTE

Set Critical Temperature Operating Mode or Query Temperature

AT+CMTE Set Critical Temperature Operating Mode or Query Temperature

Read Command
AT+CMTE?

Response
+CMTE: <mode>,<Temperature>
OK
Parameters
See Write Command

Write Command Response

AT+CMTE=<mo OK
de>
ERROR
Parameters
<mode>
0 Disable temperature detection
1 Enable temperature detection
<Temperature>
range from -40.00 to 95.00
Parameter Saving AT&W_SAVE
Mode
Max
Time

Response 2s

Reference

Note
When temperature is extremely high or low, product will power off.
URCs indicating the alert level "1" or "-1" are intended to enable the user to
take appropriate precautions, such as protecting the module from exposure
to extreme conditions, or saving or backing up data etc.
Level "2" or "-2" URCs are followed by immediate shutdown.

6.2.25 AT+CMGDA
AT+CMGDA

Delete All SMS

Delete All SMS

Test Command
AT+CMGDA=?

Response
+CMGDA: (list of supported <type>s)
OK
+CMS ERROR: <err>
Parameter
See Write Command

Write Command Response

AT+CMGDA=<t OK
ype>
ERROR
+CMS ERROR: <err>
Parameter

SIM800 Series_AT Command Manual_V1.02

161

2013-10-23

Smart Machine Smart Decision

<type>
1) If text mode:
"DEL READ"
Delete all read messages
"DEL UNREAD" Delete all unread messages
"DEL SENT"
Delete all sent SMS
"DEL UNSENT"
Delete all unsent SMS
"DEL INBOX"
Delete all received SMS
"DEL ALL"
Delete all SMS
2) If PDU mode:
1 Delete all read messages
2 Delete all unread messages
3 Delete all sent SMS
4 Delete all unsent SMS
5 Delete all received SMS
6 Delete all SMS
Parameter Saving NO_SAVE
Mode
Max
Time

Response 5sdelete 1 message

25sdelete 50 messages
25sdelete 150 messages

Reference

Note

6.2.26 AT+STTONE
AT+STTONE

Play SIM Toolkit Tone

Play SIM Toolkit Tone

Test Command
AT+STTONE=?

Response
+STTONE: (list of supported <mode>s),(list of supported <tone>s),(list of
supported <duration>s)
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
See Write Command

Write Command
AT+STTONE=<
mode>,<tone>,<
duration>

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Unsolicited Result Code
The playing is stopped or completed.
+STTONE: 0

SIM800 Series_AT Command Manual_V1.02

162

2013-10-23

Smart Machine Smart Decision

Parameters
<mode>

0 Stop playing tone

1 Start playing tone
<tone>
Numeric type
1 Dial Tone
2 Called Subscriber Busy
3 Congestion
4 Radio Path Acknowledge
5 Radio Path Not Available / Call Dropped
6 Error / Special information
7 Call Waiting Tone
8 Ringing Tone
16 General Beep
17 Positive Acknowledgement Tone
18 Negative Acknowledgement or Error Tone
19 Indian Dial Tone
20 American Dial Tone
<duration> Numeric type, in milliseconds.
Max requested value = 255*60*1000 = 15300000ms
(supported range = 10-15300000)
Parameter Saving NO_SAVE
Mode
Max
Time

Response -

Reference

Note

6.2.27 AT+SIMTONE
AT+SIMTONE

Generate Specifically Tone

Generate Specifically Tone

Test Command
Response
AT+SIMTONE= +SIMTONE: (0,1),(20-20000),(200-25500),(0,100-25500),(10-500000)
?
OK
Parameters
See Write Command
Write Command
AT+SIMTONE=
<mode>,<freque
ncy>,<periodOn
>,<periodOff>[,<
duration>]

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Unsolicited Result Code
The playing is stopped or completed.
+SIMTONE: 0

SIM800 Series_AT Command Manual_V1.02

163

2013-10-23

Smart Machine Smart Decision

Parameters
<mode>
<frequency>
<periodOn>
<periodOff>
<duration>

0 Stop playing tone

1 Start playing tone
The frequency of tone to be generated
The period of generating tone, must be multiple of 100
The period of stopping tone, must be multiple of 100
Duration of tones in milliseconds

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note

6.2.28 AT+CCPD
AT+CCPD

Enable or Disable Alpha String

Enable or Disable Alpha String

Test Command
AT+CCPD=?

Response
+CCPD: (0,1)
OK
Parameter
See Write Command

Read Command
AT+CCPD?

Response
+CCPD: <mode>
OK
Parameter
See Write Command

Write Command Response

AT+CCPD=<mo OK
If error is related to ME functionality:
de>
+CME ERROR: <err>
Parameter
<mode>
0 Disable to present alpha string
1 Enable to present alpha string
Parameter Saving AT&W_SAVE
Mode
Max
Time

Response -

Reference

Note

SIM800 Series_AT Command Manual_V1.02

164

2013-10-23

Smart Machine Smart Decision

6.2.29 AT+CGID
AT+CGID

Get SIM Card Group Identifier

Get SIM Card Group Identifier

Execution
Command
AT+CGID

Response
+GID: <gid1>,<gid2>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<gid1>
Integer type of SIM card group identifier 1
<gid2>
Integer type of SIM card group identifier 2

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note
If the SIM supports GID files, the GID values will be retuned. Otherwise
0xff is retuned.

6.2.30 AT+MORING
AT+MORING

Show State of Mobile Originated Call

Show State of Mobile Originated Call

Test Command
Response
AT+MORING=? +MORING: (0,1)
OK
Parameter
See Write Command
Read Command
AT+MORING?

Response
+MORING: <mode>
OK
Parameter
See Write Command

Write Command Response

AT+MORING=< OK
If error is related to ME functionality:
mode>
+CME ERROR: <err>
Parameter
<mode>

0 Not show call state of mobile originated call

1 Show call state of mobile originated call. After the call

SIM800 Series_AT Command Manual_V1.02

165

2013-10-23

Smart Machine Smart Decision

number is dialed, the URC strings of MO RING will be sent

if another call is alerted and the URC strings of MO
CONNECTED will be sent if the call is established.
Unsolicited Result Code
MO RING
the call is alerted.
MO CONNECTED
the call is established.
Parameter Saving AT&W_SAVE
Mode
Max
Time

Response -

Reference

Note

6.2.31 AT+CMGHEX
AT+CMGHEX
Test Command
AT+CMGHEX=
?

Enable or Disable Sending Non-ASCII Character SMS

Enable or Disable Sending Non-ASCII Character SMS

Response
+CMGHEX: (list of supported <mode>s)
OK
Parameter
See Write Command

Read Command
AT+CMGHEX?

Response
+CMGHEX: <mode>
OK
Parameter
See Write Command

Write Command
AT+CMGHEX=
<mode>

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<mode>

0 Send SMS in ordinary way

1 Enable to send SMS varying from 0x00 to 0x7f except
0x1a and 0x1b under text mode and GSM character set
Parameter Saving NO_SAVE
Mode
Max

Response -

SIM800 Series_AT Command Manual_V1.02

166

2013-10-23

Smart Machine Smart Decision

Time
Reference

Note
Only be available in TEXT mode and AT+CSCS="GSM".

6.2.32 AT+CCODE
AT+CCODE

Configure SMS Code Mode

Configure SMS Code Mode

Test Command
AT+CCODE=?

Response
+CCODE: (0,1)
OK
Parameter
See Write Command

Read Command
AT+CCODE?

Response
+CCODE:<mode>
OK
Parameter
See Write Command

Write Command
AT+CCODE=<
mode>

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<mode>

0 Code mode compatible with NOKIA

1 Code mode compatible with SIEMENS

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note

6.2.33 AT+CIURC
AT+CIURC

Enable or Disable Initial URC Presentation

Enable or Disable Initial URC Presentation

Test Command
AT+CIURC=?

Response
+CIURC: (0,1)
OK
Parameter
See Write Command

Read Command
AT+CIURC?

Response
+CIURC:<mode>

SIM800 Series_AT Command Manual_V1.02

167

2013-10-23

Smart Machine Smart Decision

OK
Parameter
See Write Command
Write Command Response
AT+CIURC=<m OK
If error is related to ME functionality:
ode>
+CME ERROR: <err>
Parameter
<mode>

0 Disable URC presentation.

1 Enable URC presentation

Parameter Saving AT&W_SAVE

Mode
Max
Time

Response -

Reference

Note
When module is powered on and initialization procedure is over.
URC "Call Ready" will be presented if <mode> is 1.

6.2.34 AT+CPSPWD
AT+CPSPWD

Change PS Super Password

Change PS Super Password

Write Command
AT+CPSPWD=<
oldpwd>,<newp
wd>

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<oldpwd>
<newpwd>

String type(string should be included in quotation marks).

Old password and length should be 8.
String type(string should be included in quotation marks).
New password and length should be 8.

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note
Default value of <oldpwd> is "12345678".
If module is locked to a specific SIM card through AT+CLCK and
password lost or SIM state is PH-SIM PUK, user can use the super
password to unlock it.
It is not supported temporarily.

SIM800 Series_AT Command Manual_V1.02

168

2013-10-23

Smart Machine Smart Decision

6.2.35 AT+EXUNSOL Enable or Disable Proprietary Unsolicited Indications

AT+EXUNSOL Enable or Disable Proprietary Unsolicited Indications
Test Command
AT+EXUNSOL=
?

Response
+EXUNSOL: (list of supported <exunsol>s)
OK
Parameters
See Write Command

Write Command
AT+EXUNSOL=

Response
OK

<exunsol>,<mod
e>

If error is related to ME functionality:

+CME ERROR: <err>
Parameters
<exunsol> String type(string should be included in quotation marks).
values are currently reserved by the present document
"SQ" Signal Quality Report
Displays signal strength and channel bit error rate (similar
to AT+CSQ) in form +CSQN: <rssi>,<ber>when values
change.
<mode>
0 Disable
1 Enable
2 Query

Parameter Saving
Mode

AT&W_SAVE

Max
Time

Response

Reference

Note

6.2.36 AT+CGMSCLASS
AT+CGMSCLASS
Test Command
AT+CGMSCLA
SS=?

Change GPRS Multislot Class

Change GPRS Multislot Class

Response
MULTISLOT CLASS: (2,4,8,9,10,12)
OK
Parameter
See Write Command

Read Command
AT+CGMSCLA
SS?

Response
MULTISLOT CLASS: <class>

SIM800 Series_AT Command Manual_V1.02

169

2013-10-23

Smart Machine Smart Decision

OK
Parameter
See Write Command
Write Command
AT+CGMSCLA
SS=<class>

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<class>

GPRS multi-slot class

Parameter Saving AUTO_SAVE

Mode
Max
Time

Response -

Reference

Note

6.2.37 AT+CDEVICE
AT+CDEVICE

View Current Flash Device Type

View Current Flash Device Type

Read Command
AT+CDEVICE?

Response
Device Name: Current flash device type
OK

Parameter
Mode
Max
Time

Saving NO_SAVE
Response -

Reference
V.25ter

Note

6.2.38 AT+CCALR
AT+CCALR

Call Ready Query

Call Ready Query

Test Command
AT+CCALR=?

Response
+CCALR: (list of supported <mode>s)
OK
Parameter
<mode>
A numeric parameter which indicates whether the module
is ready for phone call.
0 Module is not ready for phone call
1 Module is ready for phone call

Read Command

Response

SIM800 Series_AT Command Manual_V1.02

170

2013-10-23

Smart Machine Smart Decision

AT+CCALR?

ME returns the status of result code presentation and an integer <n>

which shows whether the module is currently ready for phone call.
+CCALR: <mode>
OK
Parameter
See Test Command

Parameter Saving
Mode

NO_SAVE

Max
Time

Response

Reference

Note

6.2.39 AT+GSV Display Product Identification Information

AT+GSV Display Product Identification Information
Execution
Command
AT+GSV

Response
TA returns product information text
Example:
SIMCOM_Ltd
SIMCOM_SIM800H
Revision: 1308B01SIM800H32
OK

Parameter
Mode
Max
Time

Saving NO_SAVE
Response -

Reference

Note

6.2.40 AT+SGPIO
AT+SGPIO
Test Command
AT+SGPIO=?

Control the GPIO

Control the GPIO

Response
+SGPIO: (0-1),(1-3),(0-1),(0-1)
OK
Parameters
See Write Command

Write Command
Response
AT+SGPIO=<ope OK
SIM800 Series_AT Command Manual_V1.02

171

2013-10-23

Smart Machine Smart Decision

ration>,<GPIO>,
<function>,<level
>

Parameter
Mode
Max
Time

ERROR
Parameters
<Operation> 0 Set the GPIO function including the GPIO output .
1 Read the GPIO level. Please note that only when the gpio is
set as input, user can use parameter 1 to read the GPIO level, otherwise the
module will return "ERROR".
<GPIO>
The GPIO you want to be set. (It has relations with the
hardware, please refer to the hardware manual)
<function>
Only when <Operation> is set to 0, this option takes
effect.
0 Set the GPIO to input.
1 Set the GPIO to output
<level>
0 Set the GPIO low level
1 Set the GPIO high level

Saving NO_SAVE
Response -

Reference

Note

6.2.41 AT+SPWM
AT+SPWM

Generate the Pulse-Width-Modulation

Generate the Pulse-Width-Modulation

Test Command
AT+SPWM=?

Response
+SPWM: (list of supported <index>s),(list of supported <freq>s),(list of
supported <level>s)
OK
Parameters
See Write Command

Write Command
AT+SPWM=<in
dex>,<freq>,<lev
el>

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<index>
Integer type: the index number of PWM port, which value is
0-2; Current only support one channel,whether 0 or 1 or 2,the PWM port is
the same.
0: for buzzer (according to the hardware support or not).
1: corresponding to PWM_OUT0 in the hardware circuit
2: corresponding to PWM_OUT1 in the hardware circuit
< freq >

the range of < freq > is 0-2000,

SIM800 Series_AT Command Manual_V1.02

172

2013-10-23

Smart Machine Smart Decision

<level>
Parameter
Mode

the output frequency equals to CLK/(PWM_CNT+1),where

PWM_CNT=CLK/ period-1.
duty ratio =PWM_THRES/( PWM_CNT+1)

Saving NO_SAVE

Max Response Time Reference

Note
The PWM clock source is 4KHz, the equation of the final frequency is:
frequency = CLK/(PWM_CNT+1), where PWM_CNT = CLK/freq 1.
However, the equation can not be simplified. PWM_THRES should be less
than the PWM_CNT.
If freq euals 0, the output of PWM is in low state.

6.2.42 AT+ECHO
AT+ECHO

Echo Cancellation Control

Echo Cancellation Control

Test Command
AT+ECHO=?

Response
+ECHO: (0,1),(0-65535),(0-65535),(0-65535),(0-65535),(0,1)
OK
Parameters
See Write Command

Read Command
AT+ECHO?

Response
+ECHO: (<mic0>,<nlp0>, <aec0>,<nr0>, <ns0>),(<micn>,<nlpn>,
<aecn>,<nrn>, <nsn>)
OK
Parameters
See Write Command

Write Command
AT+ECHO=<mi
c>,<nlp>,<aec>,<
nr>,<ns>[,<state
>]

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
< mic >
audio channel
0 main audio handset channel
1 main audio handfree channel
<nlp>
nonlinear processing remove residual echo and background
noise
<aec>
acoustic echo cancellation
<nr>
noise reduction
<ns>
noise suppression
< state>
enable or disable to close echo algorithm

SIM800 Series_AT Command Manual_V1.02

173

2013-10-23

Smart Machine Smart Decision

0
1

echo algorithm be closed

echo algorithm be actived

Parameter Saving AUTO_SAVE

Mode
Max
Time

Response -

Reference

Note
For this command, please refer to actual model.
The default state the echo echo algorithm be actived, and the read command
is not displayed.

6.2.43 AT+CAAS
AT+CAAS

Control Auto Audio Switch

Control Auto Audio Switch

Test Command
AT+CAAS=?

Response
+CAAS: (0-2)
OK
Parameter
See Write Command

Read Command
AT+CAAS?

Response
+CAAS: <mode>
OK
Parameter
See Write Command

Write Command
AT+CAAS=<mo
de>

Response
This parameter setting determines whether or not the audio channel will be
switched automatically to the corresponding channel in case of headset
attaching or detaching.
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<mode>
0
Disable automatic audio channel switch function, the headset
HOOK function is disabled;
1
Enable automatic audio channel switch function, the headset
HOOK function is enabled;
2
Disable automatic audio channel switch function, the headset
HOOK function is enabled.

Parameter Saving AT&W_SAVE

SIM800 Series_AT Command Manual_V1.02

174

2013-10-23

Smart Machine Smart Decision

Mode
Max
Time

Response -

Reference

Note
For this command, please refer to actual model.
The headset detection is still worked when <mode> is set to 0.

6.2.44 AT+SVR
AT+SVR

Configure Voice Coding Type for Voice Calls

Configure Voice Coding Type for Voice Calls

Test Command
AT+SVR=?

Response
+SVR: (list of supported <voice_rate_coding>s)
OK
Parameter
See Write Command

Read Command
AT+SVR?

Response
+SVR: <voice_rate_coding>
OK
Parameter
See Write Command

Write Command Response

AT+SVR=<voice OK
If error is related to ME functionality:
_rate_coding>
+CME ERROR: <error>
Parameter
<voice_rate_coding>
A number parameter which indicate the voice
coding type.
0:FR
1:EFR/FR
2.HR/FR
3:FR/HR
4:HR/EFR
5:EFR/HR
6:AMR-FR/EFR,AMR-HR
7:AMR-FR/EFR,AMR-HR/HR
8:AMR-HR/HR/AMR-FR/EFR
9:AMR-HR/AMR-FR/EFR
10:AMR-HR/AMR-FR/FR
11:AMR-HR/HR/AMR-FR
12:AMR-FR/AMR-HR
13:AMR-FR/FR/AMR-HR

SIM800 Series_AT Command Manual_V1.02

175

2013-10-23

Smart Machine Smart Decision

14:AMR-FR/FR/AMR-HR/HR
15:AMR-FR/EFR/FR/AMR-HR/HR
16:AMR-HR/AMR-FR/EFR/FR/HR
17: AMR-FR/AMR-HR/EFR/FR/HR
Parameter Saving AT&W_SAVE
Mode
Max
Time

Response -

Reference

Note
The parameter of AT+SVR is stored in non-volatile memory.

6.2.45 AT+GSMBUSY Reject Incoming Call

AT+GSMBUSY Reject Incoming Call
Test Command
Response
AT+GSMBUSY= +GSMBUSY: (0,1,2)
?
OK
Parameter
See Write Command
Read Command
Response
AT+GSMBUSY? +GSMBUSY: <mode>
OK
Parameter
See Write Command
Write Command Response
AT+GSMBUSY=
<mode>
OK
If error is related to ME functionality:
+CME ERROR: <error>
Parameter
<mode>

0 Enable incoming call

1 Forbid all incoming calls
2 Forbid incoming voice calls but enable CSD calls

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note
The parameter is not saved if the module power down.

SIM800 Series_AT Command Manual_V1.02

176

2013-10-23

Smart Machine Smart Decision

6.2.46 AT+CEMNL Set the List of Emergency Number

AT+CEMNL Set the List of Emergency Number
Test Command
AT+CEMNL=?

Response
+CEMNL: (0-1),(1-11), ("0"-"999")
OK
Parameter
See Write Command

Read Command
AT+CEMNL?

Response
+CEMNL: <mode>[,<amount>,<emergency numbers>]
OK
Parameter
See Write Command

Write Command
AT+CEMNL=<
mode>[,<amount
>,<emergency
numbers>]

Response
OK
ERROR
Parameter
<mode> 0 disable
1 enable
<amount> Amount of emergency number to be set. Up to 11 emergency
numbers supported
<emergency numbers>
Emergency numbers to be set by user which range is 0-999

Parameter Saving AUTO_SAVE

Mode
Max
Time

Response -

Reference

Note

6.2.47 AT*CELLLOCK

Set the List of ARFCN Which Needs to Be Locked

AT*CELLLOCK Set the List of ARFCN Which Needs to Be Locked

Test Command
AT*CELLLOC
K=?

Response
*CELLLOCK: (list of supported <mode>s)[,(list of supported
<amount>s),(list of supported <locked arfcn list>s)[, (list of supported
<locked arfcn list>s) [, (list of supported <locked arfcn list>s)]]]
OK
Parameter
See Write Command

Read Command

Response

SIM800 Series_AT Command Manual_V1.02

177

2013-10-23

Smart Machine Smart Decision

AT*CELLLOC
K?

*CELLLOCK: <mode>[,<amount>,<locked arfcn list>[,<locked arfcn

list>]]
OK
Parameter
See Write Command

Write Command
AT*CELLLOC
K=<mode>[,<am
ount>,<locked
arfcn
list>[,<locked
arfcn list>]]

Response
OK
ERROR
Parameter
<mode>
0
Disable
1
Enable
<amout>
Amount of arfcn to be set. Up to 3 arfcn supported.
<locked arfcn list>
Arfcn needs to be locked by user.
Scope: (0-124), (128-251), (512-885) or (975-1023).

Parameter Saving AUTO_SAVE

Mode
Max
Time

Response -

Reference

6.2.48 AT+SLEDS

Note

Set the Timer Period of Net Light

AT+SLEDS Set the Timer Period of Net Light

Test Command
AT+SLEDS=?

Response
+SLEDS: (1-3),(0,40-65535),(0,40-65535)
OK
Parameters
See Write Command

Read Command
AT+SLEDS?

Response
+SLEDS: <mode>,<timer_on>,<timer_off>
OK
Parameters
See Write Command

Write Command Response

AT+SLEDS=<m OK
ode>,<timer_on> ERROR

SIM800 Series_AT Command Manual_V1.02

178

2013-10-23

Smart Machine Smart Decision

,<timer_off>

Parameters
<mode>
1 set the timer period of net light while SIM800 series does not
register to the network
2 set the timer period net light while SIM800 series has already
registered to the network
3 set the timer period net light while SIM800 series is in the state of
PPP communication
<timer_on>
Timer period of LED ON in decimal format which range is 0 or
40-65535(ms)
<timer_off>
Timer period of LED OFF in decimal format which range is 0 or
40-65535(ms)

Parameter Saving AT&W_SAVE

Mode
Max
Time

Response -

Reference

Note
The default value is :
<mode>,<timer_on>,<timer_off>
1,64,800
2,64,3000
3,64,300

6.2.49 AT+CBUZZERRING Use the Buzzer Sound as the Incoming Call Ring
AT+CBUZZERRING Use the Buzzer Sound as the Incoming Call Ring
Read Command
AT+CBUZZER
RING?

Response
+CBUZZERRING: <mode>
OK
Parameter
See Write Command

Write Command
AT+CBUZZER
RING=<mode>

Response
OK
ERROR
Parameter
<mode>
0 disable the function of using buzzer sound as the incoming call ring
1 enable the function of using buzzer sound as the incoming call ring

Parameter Saving AT&W_SAVE

Mode

SIM800 Series_AT Command Manual_V1.02

179

2013-10-23

Smart Machine Smart Decision

Max
Time

Response -

Reference

Note
This buzzer function is depending on the hardware.

6.2.50 AT+CEXTERNTONE

Close or Open the Microphone

AT+CEXTERNTONE Close or Open the Microphone

Test Command
AT+CEXTERN
TONE=?

Response
+CEXTERNTONE: (0,1)
OK
Parameter
See Write Command

Read Command
AT+CEXTERN
TONE?

Response
+CEXTERNTONE: <mode>
OK
Parameter
See Write Command

Write Command Response

AT+CEXTERNT OK
ONE=<mode>
ERROR
Parameter
<mode>
0 re-open the microphone
1 close the microphone
Parameter Saving NO_SAVE
Mode
Max
Time

Response -

Reference

Note

6.2.51 AT+CNETLIGHT Close the Net Light or Open It to Shining

AT+CNETLIGHT Close the Net Light or Open It to Shining
Test Command
Response
AT+CNETLIGH +CNETLIGHT: (0,1)
T=?
OK

SIM800 Series_AT Command Manual_V1.02

180

2013-10-23

Smart Machine Smart Decision

Parameter
See Write Command
Read Command
Response
AT+CNETLIGH +CNETLIGHT: <mode>
T?
OK
Parameter
See Write Command
Write Command Response
AT+CNETLIGH OK
T=<mode>
ERROR
Parameter
<mode>
0 close the net light
1 open the net light to shining
Parameter Saving AT&W_SAVE
Mode
Max
Time

Response -

Reference

Note

6.2.52 AT+CWHITELIST Set the White List

AT+CWHITELIST Set the White List
Test Command
Response
AT+CWHITELI +CWHITELIST: (0,1)
ST=?
OK
Parameter
See Write Command
Read Command
Response
AT+CWHITELI +CWHITELIST: <mode>[,<phone number1>,<phone number2>,<
ST?
phone number30>]
OK
Parameters
See Write Command
Write Command Response
AT+CWHITELI OK
ST=<mode>[,<in ERROR

SIM800 Series_AT Command Manual_V1.02

181

2013-10-23

Smart Machine Smart Decision

Parameters
<mode>
0 disable
1 enable
<index>
The index of phone number, scope: 1-30
<phone number>
Phone number to be set

dex>,<phone
number>]

Parameter Saving
Mode
Max
Time

AUTO_SAVE

Response -

Reference

Note

6.2.53 AT+CSDT
AT+CSDT

Switch On or Off Detecting SIM Card

Switch On or Off Detecting SIM Card

Test Command
AT+CSDT=?

Response
+CSDT: (0-1)
OK
Parameter
See Write Command

Read Command
AT+CSDT?

Response
+CSDT: <mode>
OK
Parameter
See Write Command

Write Command
AT+CSDT=<mo
de>

Response
OK
ERROR
Parameter
<mode>
0 Switch off detecting SIM card
1 Switch on detecting SIM card

Parameter Saving AT&W_SAVE

Mode
Max
Time

Response -

Reference

Note
User should select 8-pin SIM card holder to implement SIM card detection

SIM800 Series_AT Command Manual_V1.02

182

2013-10-23

Smart Machine Smart Decision

function.
After plug out simcard,User should wait 2 seconds ,then plug in simcard.
6.2.54 AT+CSMINS
AT+CSMINS

SIM Inserted Status Reporting

SIM Inserted Status Reporting

Test Command
AT+CSMINS=?

Response
+CSMINS: (list of supported <n>s)
OK
Parameter
See Write Command

Read Command
AT+CSMINS?

Response
+CSMINS: <n>,<SIM inserted>
OK
Parameters
See Write Command

Write Command
AT+CSMINS=<
n>

Response
OK
ERROR
If error is related to ME functionality:
+CME ERROR: <err>
Unsolicited Result Code
+CSMINS: <n>,<SIM inserted>
Parameters
<n>
A numeric parameter to show an unsolicited event code
indicating whether the SIM has been inserted or removed.
0
Disable
1
Enable
<SIM inserted>
A numeric parameter which indicates whether SIM
card has been inserted.
0
Not inserted
1
Inserted

Parameter Saving
Mode

AT&W_SAVE

Max
Time

Response

Reference

Note

6.2.55 AT+CSGS Netlight Indication of GPRS Status

AT+CSGS Netlight Indication of GPRS Status

SIM800 Series_AT Command Manual_V1.02

183

2013-10-23

Smart Machine Smart Decision

Test Command
AT+CSGS=?

Response
+CSGS: (0-1)
OK
Parameter
See Write Command

Read Command
AT+CSGS?

Response
+CSGS: <mode>
OK
Parameter
See Write Command

Write Command
AT+CSGS=<mo
de>

Response
OK
ERROR
Parameter
<mode>
0 disable
1 enable, the netlight will be forced to enter into 64ms on/300ms off
blinking state in GPRS data transmission service. Otherwise, the netlight
state is not restricted.

Parameter Saving AT&W_SAVE

Mode
Max
Time

Response -

Reference

Note

6.2.56 AT+CMICBIAS

Close or Open the MICBIAS

AT+CMICBIAS Close or Open the MICBIAS

Test Command
AT+CMICBIAS
=?

Response
+CMICBIAS: (0,1)
OK
Parameter
See Write Command

Read Command
AT+CMICBIAS
?

Response
+CMICBIAS: <mode>
OK
Parameter
See Write Command

SIM800 Series_AT Command Manual_V1.02

184

2013-10-23

Smart Machine Smart Decision

Write Command
AT+CMICBIAS
=<mode>

Response
OK
ERROR
Parameter
<mode>
0 turn off the micbias
1 turn on the micbias

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note

6.2.57 AT+DTAM
AT+DTAM

Set TTS and RECORD Play Mode in Call

Set TTS and RECORD Play Mode in Call

Test Command
AT+DTAM=?

Response
+DTAM: (0-2)
OK
Parameter
See Write Command

Read Command
AT+DTAM?

Response
+DTAM: <mode>
OK
Parameter
See Write Command

Write Command Response

AT+DTAM=<mo OK
de>
ERROR
Parameter
<mode> TTS and record play mode
0
local
1
remote
2
local and remote
Parameter Saving NO_SAVE
Mode
Max
Time

Response -

Reference

Note
This command takes effect only in call. TTS and record not in call only play

SIM800 Series_AT Command Manual_V1.02

185

2013-10-23

Smart Machine Smart Decision

locally no matter what the mode is. Setting takes effect before TTS or
record play.
6.2.58 AT+SJDR Set Jamming Detection Function
AT+SJDR

Set Jamming Detection Funcition

Test Command
AT+SJDR=?

Response
+SJDR: (0,1)
OK
Parameters
See Write Command

Read Command
AT+SJDR?

Response
+SJDR: <status>
or
+SJDR: <status>,<mode>,<var>,<display>,<result>
OK
Parameters
See Write Command

Write Command
Response
AT+SJDR=<status> OK
,<mode>[,<var>[,< ERROR
display>]]
If error is related to ME functionality:
+CME ERROR: <err>
Unsolicited result codes supported:
+SJDR: NO JAMMING
or
+SJDR: JAMMING DETECTED
or
+SJDR: INTERFERENCE DETECTED
Parameters
<status>
0 disable jamming detection
1 enable jamming detection
<mode>
0 should inquire status by reading command;
1 only report jamming status via URC from serial port;
2 only report jamming status via the PIN;
3 report jamming status via URC as well as the PIN.
<var>
The threshold to separate +SJDR: JAMMING

SIM800 Series_AT Command Manual_V1.02

186

2013-10-23

Smart Machine Smart Decision

DETECTED from +SJDR: INTERFERENCE

DETECTED (while the signal strength variance is
higher than <var>, there could be industrial interferences ,
and +SJDR: INTERFERENCE DETECTED is
reported).
1-255(default value:255)
<display>
0 report jamming status via URC every 3000ms. (only
when <mode> is set to 1 or 3)
1 report jamming status via URC when jamming status
changed.(only when <mode> is set to 1 or 3)
Parameter
Mode

Saving NO_SAVE

Max Response Time

Reference

Note
z When you query jamming detection status after enable jamming
detection mode, you will get the URC of the format below:
+SJDR:1,<mode>,<var>,<display>,<result>
<result>=0, means no jamming.
<result>=1, means jamming is detected.
<result>=2, means industrial interference is detected.
z +SJDR: INTERFERENCE DETECTED indicates industrial
interference which signifies unintentional radio link disturbances by
strong industrial radio sources.
z Jamming detection PIN is designed to indicate jamming by
outputting different level. When jamming is detected, the PIN will
output a high level, otherwise, it will output a low level. Jamming
detection PIN takes effect only in SIM800H/SIM800L/SIM800.The
Jamming detection PIN is defined as follows.

Module Type

Jamming detection PIN

SIM800H/SIM800L

PIN5

SIM800

PIN67

SIM800V/SIM800W/SIM840V/SIM840W have no jamming

detection PIN to indicate JD status, only report jamming status via
URC from serial port.

6.2.59 AT+CPCMCFG Set PCM Parameter

AT+CPCMCFG Set PCM Parameter
Test Command
AT+CPCMCFG
=?

Response
+CPCMCFG: (0-1)
OK

SIM800 Series_AT Command Manual_V1.02

187

2013-10-23

Smart Machine Smart Decision

Parameter
See Write Command
Read Command
AT+CPCMCFG
?

Response
+CPCMCFG: <format>
OK
Parameter
See Write Command

Write Command
AT+CPCMCFG
=< format >

Response
OK
ERROR
Parameter
< format >

0
1

MSB
LSB

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note
The command is only supported by SIM800H&SIM800L.

6.2.60 AT+CPCMSYNC
AT+CPCMSYNC
Test Command
AT+CPCMSYN
C=?

Set PCM Sync Parameter

Set PCM Sync Parameter

Response
+CPCMSYNC: (0-1),(1-8)
OK
Parameter
See Write Command

Read Command
AT+CPCMSYN
C?

Response
+CPCMSYNC: <sync>, <length>
OK
Parameter
See Write Command

Write Command
AT+CPCMSYN
C=<sync>,<lengt
h>

Response
OK
ERROR
Parameter
<sync> 0
PCM short sync
1
PCM long sync
<length> 1-8
PCM sync length(1-8)

SIM800 Series_AT Command Manual_V1.02

188

2013-10-23

Smart Machine Smart Decision

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note
The <length> is only supported 1 when PCM sync is short sync.
The command is only supported by SIM800H&SIM800L.

6.2.61 AT+CANT Antenna Detecting

AT+CANT
Test Command
AT+CANT=?

Antenna Detecting
Response
+CANT:
(list
of
supported
<mode>s),(list
<UrcEnable>s),(list of supported <timer>s)

of

supported

OK
+CME ERROR: <err>
Parameter
See Write Command
Read Command
AT+CANT?

Response
+CANT: <mode>, <UrcEnable>, <timer>
OK
+CME ERROR: <err>
Parameter
See Write Command

Write Command Response

AT+CANT=<mo OK
de>,<UrcEnable
>,<timer>
+CANT: <status>

SIM800 Series_AT Command Manual_V1.02

189

2013-10-23

Smart Machine Smart Decision

Parameter
<mode>

0
1

Disable the antenna detecting function

Enable the antenna detecting function

<UrcEnable>

0
1

Disable reporting antenna state by URC

Enable reporting antenna state by URC

<timer>

0-3600 Reporting timer in units of seconds, range:

0-3600. Set timer to 0 will close detect, the
recommend value is 10.
0
Connected normally
1
Connected to GND
2
Connected to other power source
3
Not connected

<status>

Parameter Saving AT&W_SAVE

Mode
Max
Time

Response -

Reference

Note

6.2.62 AT+CAGCSET Close or Open AGC Function

AT+CAGCSET

Close or Open AGC Funcion

Test Command
Response
AT+CAGCSET= +CAGCSET: (0,1)
?
OK
Parameter
See Write Command
Read Command
Response
AT+CAGCSET? +CAGCSET: <mode>
OK
Parameter
See Write Command
Write Command Response
AT+CAGCSET= OK
<mode>
ERROR
Parameter
<mode>
0 close AGC function
1 open the AGC function

SIM800 Series_AT Command Manual_V1.02

190

2013-10-23

Smart Machine Smart Decision

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note

SIM800 Series_AT Command Manual_V1.02

191

2013-10-23

Smart Machine Smart Decision

7 AT Commands for GPRS Support

7.1 Overview of AT Commands for GPRS Support
Command

Description

AT+CGATT

Attach or detach from GPRS service

AT+CGDCONT

Define PDP context

AT+CGQMIN

Quality of service profile (minimum acceptable)

AT+CGQREQ

Quality of service profile (requested)

AT+CGACT

PDP context activate or deactivate

AT+CGDATA

Enter data state

AT+CGPADDR

Show PDP address

AT+CGCLASS

GPRS mobile station class

AT+CGEREP

Control unsolicited GPRS event reporting

AT+CGREG

Network registration status

AT+CGSMS

Select service for MO SMS messages

7.2 Detailed Descriptions of AT Commands for GPRS Support

7.2.1 AT+CGATT Attach or Detach from GPRS Service
AT+CGATT Attach or Detach from GPRS Service
Test Command
AT+CGATT=?

Response
+CGATT: (list of supported <state>s)
OK
Parameter
See Write Command

Read Command
AT+CGATT?

Response
+CGATT: <state>
OK
Parameter
See Write Command

Write Command Response

AT+CGATT=<st OK
If error is related to ME functionality:
ate>
+CME ERROR: <err>
Parameter
<state>

Indicates the state of GPRS attachment

SIM800 Series_AT Command Manual_V1.02

192

2013-10-23

Smart Machine Smart Decision

0 Detached
1 Attached
Other values are reserved and will result in an ERROR response to the
Write Command.
Parameter Saving NO_SAVE
Mode
Max
Time

Response 10 seconds

Reference

Note

7.2.2 AT+CGDCONT Define PDP Context

AT+CGDCONT Define PDP Context
Test Command
AT+CGDCONT
=?

Response
+CGDCONT: (range of supported <cid>s),<PDP_type>,,,(list of
supported<d_comp>s),(list of supported<h_comp>s)
[<CR><LF>+CGDCONT:
(range of supported <cid>s), <PDP_type>,,,(list ofsupported
<d_comp>s),(list of supported <h_comp>s) [...]]
OK
Parameters
See Write Command

Read Command
AT+CGDCONT
?

Response
+CGDCONT:
<cid>,<PDP_type>,<APN>,<PDP_addr>,<data_comp>,<head_comp>
[<CR><LF>+CGDCONT:
<cid>,<PDP_type>,<APN>,<PDP_addr>,<data_comp>,<head_comp>
[]]
OK
Parameters
See Write Command

Write Command
AT+CGDCONT
=<cid>[,<PDP_ty
pe>[,APN>[,<PD
P_addr>[,<d_co
mp>[,<h_comp>]
]]]]

Response
OK
ERROR
Parameters
<cid>

(PDP Context Identifier) a numeric parameter which

specifies a particular PDP context definition. The parameter
is local to the TE-MT interface and is used in other PDP
context-related commands. The range of permitted values
(minimum value=1) is returned by the test form of the

SIM800 Series_AT Command Manual_V1.02

193

2013-10-23

Smart Machine Smart Decision

command.
<PDP_type> (Packet Data Protocol type)
IP Internet Protocol (IETF STD 5)
<APN>
(Access Point Name) A string parameter (string should be
included in quotation marks) which is a logical name that
is used to select the GGSN or the external packet data
network. If the value is null or omitted, then the
subscription value will be requested.The default value is
NULL.
<PDP_addr> A string parameter (IP address). Format:
"<n>.<n>.<n>.<n>" where <n>=0..255
If the value is null or equals 0.0.0.0 a dynamic address will
be requested. The allocated address may be read using the
+CGPADDR command
<d_comp>
A numeric parameter that controls PDP data compression
0 PDP data compression off (default if value is omitted)
<h_comp>
A numeric parameter that controls PDP data compression
0 PDP header compression off (default if value is omitted)
Parameter Saving AUTO_SAVE
Mode
Max
Time

Response -

Reference

Note

7.2.3 AT+CGQMIN
AT+CGQMIN

Quality of Service Profile (Minimum Acceptable)

Quality of Service Profile (Minimum Acceptable)

Test Command
Response
AT+CGQMIN=? +CGQMIN: <PDP_type>,(list of supported <precedence>s),(list of
supported <delay>s),(list of supported <reliability>s),(list of supported
<peak>s),(list of supported <mean>s)
[<CR><LF>+CGQMIN: <PDP_type>,(list of supported <precedence>
s),(list of supported <delay>s),(list of supported <reliability>s),(list of
supported <peak>s),(list of supported <mean>s)
[]]
OK
Parameters
See Write Command

SIM800 Series_AT Command Manual_V1.02

194

2013-10-23

Smart Machine Smart Decision

Read Command
AT+CGQMIN?

Response
+CGQMIN: <cid>,<precedence>,<delay>,>reliability>,<peak>,<mean>
[<CR><LF>+CGQMIN:
<cid>,<precedence>,<delay>,<reliability>,<peak>,<mean>
[]]
OK
Parameters
See Write Command

Write Command
AT+CGQMIN=<
cid>[,<precedenc
e>[,<delay>[,<rel
iability>[,<peak>
[,<mean>]]]]]

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<cid>
1..3 A numeric parameter which specifies a particular
PDP context definition (see +CGDCONT command)
<precedence>
0
QOS precedence class subscribed value
1..3
QOS precedence class
<delay>
0
QOS delay class subscribed value
1..4 QOS delay class subscribed
<reliability>
0
QOS reliability class subscribed value
1..5
QOS reliability class.
<peak>
0
QOS peak throughput class subscribed value
1..9
QOS peak throughput class
<mean>
0
QOS mean throughput class subscribed value
1..18 QOS mean throughput class
31
QOS mean throughput class best effort

Parameter Saving AUTO_SAVE

Mode
Max
Time

Response -

Reference

Note

7.2.4 AT+CGQREQ
AT+CGQREQ

Quality of Service Profile (Requested)

Quality of Service Profile (Requested)

SIM800 Series_AT Command Manual_V1.02

195

2013-10-23

Smart Machine Smart Decision

Test Command
Response
AT+CGQREQ=? +CGQREQ: <PDP_type>,(list of supported <precedence>s),(list of
supported <delay>s),(list of supported <reliability>s),<list of supported
<peak>s),(list of supported <mean>s)
[<CR><LF>+CGQREQ: <PDP_type>,(list of supported <precedence>
s),(list of supported <delay>s),(list of supported <reliability>s),(list of
supported <peak>s),(list of supported <mean>s)
[]]
OK
Parameters
See Write Command
Read Command
AT+CGQREQ?

Response
+CGQREQ: <cid>,<precedence>,<delay>,>reliability>,<peak>,<mean>
[<CR><LF>+CGQREQ:
<cid>,<precedence>,<delay>,<reliability>,<peak>,<mean>
[]]
OK
Parameters
See Write Command

Write Command
AT+CGQREQ=c
id>[,<precedence
>[,<delay>[,<reli
ability>[,<peak>[
,<mean>]]]]]

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<cid>

A numeric parameter which specifies a particular PDP

context definition (see +CGDCONT Command)
The following parameter are defined in GSM 03.60
<precedence> A numeric parameter which specifies the precedence class
0
QOS precedence class subscribed value
1..3
QOS precedence class
<delay>
A numeric parameter which specifies the delay class
0
QOS delay class subscribed value
1..4
QOS delay class
<reliability>
A numeric parameter which specifies the reliability class
0
QOS reliability class subscribed value
1..5
QOS reliability class; default value: 3
<peak>
A numeric parameter which specifies the peak throughput
class
0
QOS peak throughput class subscribed value
1..9
QOS peak throughput class

SIM800 Series_AT Command Manual_V1.02

196

2013-10-23

Smart Machine Smart Decision

<mean>

A numeric parameter which specifies the mean throughput

class
0
QOS mean throughput class subscribed value
1..18 QOS mean throughput class
31
QOS mean throughput class best effort

Parameter Saving AUTO_SAVE

Mode
Max
Time

Response -

Reference

Note

7.2.5 AT+CGACT PDP Context Activate or Deactivate

AT+CGACT PDP Context Activate or Deactivate
Test Command
AT+CGACT=?

Response
+CGACT: (list of supported <state>s)
OK
Parameters
See Write Command

Read Command
AT+CGACT?

Response
+CGACT: <cid>,<state>[<CR><LF>+CGACT:<cid>,<state>]
OK
Parameters
See Write Command

Write Command Response

AT+CGACT=<st OK
If error is related to ME functionality:
ate> [,<cid>]
+CME ERROR: <err>
Parameters
<state>
Indicates the state of PDP context activation
0 deactivated
1 activated
Other values are reserved and will result in an ERROR
response to the Write Command.
<cid>
A numeric parameter which specifies a particular PDP context
definition (see +CGDCONT Command). If the <cid> is
omitted, it only affects the first cid.
Parameter Saving NO_SAVE
Mode
Max

Response 150 seconds

SIM800 Series_AT Command Manual_V1.02

197

2013-10-23

Smart Machine Smart Decision

Time
Reference

Note
This command is used to test PDPs with network simulators. Successful
activation of PDP on real network is not guaranteed.
Refer to AT+CGDATA clarification for more information.

7.2.6 AT+CGDATA Enter Data State

AT+CGDATA Enter Data State
Test Command
Response
AT+CGDATA=? +CGDATA: list of supported <L2P>s
OK
Parameter
See Write Command
Write Command Response
AT+CGDATA=< CONNECT
If error is related to ME functionality:
L2P> [,<cid>]
+CME ERROR: <err>
Parameters
<L2P>
A string parameter (string should be included in quotation
marks) that indicates the layer 2 protocol to be used between the
TE and MT:
"PPP" Point to Point protocol for a PDP such as IP

<cid>

Other values are not supported and will result in an ERROR

response to the execution Command.
A numeric parameter which specifies a particular PDP context
definition (see +CGDCONT Command)

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note

7.2.7 AT+CGPADDR
AT+CGPADDR

Show PDP Address

Show PDP Address

Test Command
Response
AT+CGPADDR= +CGPADDR: (list of defined <cid>s)
?
OK
Parameters
See Write Command

SIM800 Series_AT Command Manual_V1.02

198

2013-10-23

Smart Machine Smart Decision

Write Command Response

AT+CGPADDR= +CGPADDR: <cid>,<PDP_addr>
<cid>
[<CR><LF>+CGPADDR: <cid>,<PDP_addr>[]]
OK
ERROR
Parameters
<cid>
A numeric parameter which specifies a particular PDP context
definition (see +CGDCONT Command)
<PDP_addr> String type, IP address
Format: "<n>.<n>.<n>.<n>" where <n>=0..255
Parameter Saving NO_SAVE
Mode
Max
Time

Response -

Reference

Note
Write command returns address provided by the network if a connection has
been established.

7.2.8 AT+CGCLASS
AT+CGCLASS

GPRS Mobile Station Class

GPRS Mobile Station Class

Test Command
Response
AT+CGCLASS= +CGCLASS: (list of supported <class>s)
?
OK
Parameter
See Write Command
Read Command
Response
AT+CGCLASS? +CGCLASS: <class>
OK
Parameter
See Write Command
Write Command Response
AT+CGCLASS= OK
<class>
ERROR
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<class>

A string parameter(string should be included in quotation

marks) which indicates the GPRS mobile class (in

SIM800 Series_AT Command Manual_V1.02

199

2013-10-23

Smart Machine Smart Decision

descending order of functionality)

B Class-B mode of operation (A/Gb mode), (not
applicable in Iu mode) MT would operate PS and CS
services but not simultaneously
CG Class C in GPRS only mode
CC Class C in circuit switched only mode (lowest)
Parameter Saving AUTO_SAVE
Mode
Max
Time

Response -

Reference

Note
It only supports Class B, CG and CC.

7.2.9 AT+CGEREP Control Unsolicited GPRS Event Reporting

AT+CGEREP Control Unsolicited GPRS Event Reporting
Test Command
Response
AT+CGEREP=? +CGEREP: (list of supported <mode>s)
OK
Parameters
See Write Command
Read Command
AT+CGEREP?

Response
+CGEREP: <mode>
OK
Parameters
See Write Command

Write Command Response

AT+CGEREP=< OK
mode>
ERROR
Parameters
<mode>
0

Disable event reporting.

Enable event reporting.

Unsolicited Result Codes supported:

+CGEV: NW DEACT <PDP_type>,<PDP_addr>[,<cid>]
+CGEV: ME DEACT <PDP_type>,<PDP_addr>[,<cid>]
+CGEV: NW DETACH
+CGEV: ME DETACH

SIM800 Series_AT Command Manual_V1.02

200

2013-10-23

Smart Machine Smart Decision

Parameters
<PDP_type> Packet Data Protocol type (see +CGDCONT
Command)
<PDP_addr> Packet Data Protocol address (see +CGDCONT
Command)
<cid> Context Id (see +CGDCONT Command)
Parameter Saving NO_SAVE
Mode
Max
Time

Response -

Reference

Note

7.2.10 AT+CGREG Network Registration Status

AT+CGREG Network Registration Status
Test Command
AT+CGREG=?

Response
+CGREG: (list of supported <n>s)
OK
Parameters
See Write Command

Read Command
AT+CGREG?

Response
+CGREG: <n>,<stat>[,<lac>,<ci>]
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
See Write Command

Write Command
AT+CGREG=[<
n>]

Response
OK
ERROR
Parameters
<n>
0 Disable network registration unsolicited result code
1 Enable network registration unsolicited result code
+CGREG:<stat>
2 Enable network registration and location information
unsolicited result code +CGREG: <stat>[,<lac>,<ci>]
<stat>
0 Not registered, MT is not currently searching an
operator to register to.The GPRS service is disabled, the UE is

SIM800 Series_AT Command Manual_V1.02

201

2013-10-23

Smart Machine Smart Decision

<lac>

<ci>

allowed to attach for GPRS if requested by the user.

1 Registered, home network.
2 Not registered, but MT is currently trying to attach or
searching an operator to register to. The GPRS service is
enabled, but an allowable PLMN is currently not available. The
UE will start a GPRS attach as soon as an allowable PLMN is
available.
3 Registration denied,The GPRS service is disabled, the UE is
not allowed to attach for GPRS if it is requested by the user.
4 Unknown
5 Registered, roaming
String type (string should be included in quotation marks); two
byte location area code in hexadecimal format (e.g. "00C3"
equals 195 in decimal)
String type (string should be included in quotation marks); two
bytes cell ID in hexadecimal format

Parameter Saving AT&W_SAVE

Mode
Max
Time

Response -

Reference

Note

7.2.11 AT+CGSMS
AT+CGSMS

Select Service for MO SMS Messages

Select Service for MO SMS Messages

Test Command
AT+CGSMS=?

Response
+CGSMS: (list of currently available <service>s)
OK
Parameter
See Write Command

Read Command
AT+CGSMS?

Response
+CGSMS: <service>
OK
Parameter
See Write Command

Write Command Response

AT+CGSMS=<se OK
If error is related to ME functionality:
rvice>
+CME ERROR: <err>
Parameter
<service>

A numeric parameter which indicates the service or service

SIM800 Series_AT Command Manual_V1.02

202

2013-10-23

Smart Machine Smart Decision

preference to be used
0 Packet Domain
1 Circuit switched
2

Packet Domain preferred (use circuit switched if

GPRS not available)

3 Circuit switched preferred (use Packet Domain if circuit
switched not available)
Parameter Saving AUTO_SAVE
Mode
Max
Time

Response -

Reference

Note

SIM800 Series_AT Command Manual_V1.02

203

2013-10-23

Smart Machine Smart Decision

8 AT Commands for TCPIP Application Toolkit

8.1 Overview
Command

Description

AT+CIPMUX

Start up multi-IP connection

AT+CIPSTART

Start up TCP or UDP connection

AT+CIPSEND

Send data through TCP or UDP connection

AT+CIPQSEND

Select data transmitting mode

AT+CIPACK

Query previous connection data transmitting state

AT+CIPCLOSE

Close TCP or UDP connection

AT+CIPSHUT

Deactivate GPRS PDP context

AT+CLPORT

Set local port

AT+CSTT

Start task and set APN, user name, password

AT+CIICR

Bring up wireless connection with GPRS or CSD

AT+CIFSR

Get local IP address

AT+CIPSTATUS

Query current connection status

AT+CDNSCFG

Configure domain name server

AT+CDNSGIP

Query the IP address of given domain name

AT+CIPHEAD

Add an IP head at the beginning of a package received

AT+CIPATS

Set auto sending timer

AT+CIPSPRT

Set prompt of > when module sends data

AT+CIPSERVER

Configure module as server

AT+CIPCSGP

Set CSD or GPRS for connection mode

AT+CIPSRIP

Show remote IP address and port when received data

AT+CIPDPDP

Set whether to check state of GPRS network timing

AT+CIPMODE

Select TCPIP application mode

AT+CIPCCFG

Configure transparent transfer mode

AT+CIPSHOWTP

Display transfer protocol in IP head when received data

AT+CIPUDPMODE

UDP extended mode

AT+CIPRXGET

Get data from network manually

AT+CIPSCONT

Save TCPIP application context

AT+CIPRDTIMER

Set remode delay timer

AT+CIPSGTXT

Select GPRS PDP context

SIM800 Series_AT Command Manual_V1.02

204

2013-10-23

Smart Machine Smart Decision

8.2 Detailed Descriptions of Commands

8.2.1 AT+CIPMUX
AT+CIPMUX

Start Up Multi-IP Connection

Start Up Multi-IP Connection

Test Command
AT+CIPMUX=?

Response
+CIPMUX: (0,1)
OK
Parameter
See Write Command

Read Command
AT+CIPMUX?

Response
+CIPMUX: <n>
OK
Parameter
See Write Command

Write Command Response

AT+CIPMUX=< OK
n>
Parameter
<n>
0 Single IP connection
1 Multi IP connection
Parameter Saving NO_SAVE
Mode
Max
Time

Response -

Reference

Note
Only in IP initial state, AT+CIPMUX=1 is effective;
Only when multi IP connection and GPRS application are both shut down,
AT+CIPMUX=0 is effective.

8.2.2 AT+CIPSTART Start Up TCP or UDP Connection

AT+CIPSTART Start Up TCP or UDP Connection
Test Command
Response
AT+CIPSTART= 1) If AT+CIPMUX=0
+CIPSTART: (list of supported <mode>),(<IP address>),(<port>)
?
+CIPSTART: (list of supported <mode>),(<domain name>),(<port>)
OK
2) If AT+CIPMUX=1
+CIPSTART: (list of supported <n>),(list of supported <mode>),(<IP
address>),(<port>)
+CIPSTART: (list of supported <n>),(list of supported <mode>),(<domain
name>),(<port>)

SIM800 Series_AT Command Manual_V1.02

205

2013-10-23

Smart Machine Smart Decision

OK
Parameters
See Write Command
Write Command
1)If single IP
connection
(+CIPMUX=0)
AT+CIPSTART=
<mode>,<IP
address>,<port>
Or

Response
1)If single IP connection (+CIPMUX=0)
If format is right response
OK
otherwise response
If error is related to ME functionality:
+CME ERROR <err>
Response when connection exists
ALREADY CONNECT
AT+CIPSTART= Response when connection is successful
<mode>,<domai CONNECT OK
n name>,<port> Otherwise
STATE: <state>
2)If
multi-IP
connection
CONNECT FAIL
(+CIPMUX=1)
2)If multi-IP connection
AT+CIPSTART= (+CIPMUX=1)
<n>,<mode>,<ad If format is right
OK,
dress>,<port>
otherwise response
AT+CIPSTART= If error is related to ME functionality:
<n>,<mode>,<do +CME ERROR <err>
Response when connection exists
main name>,
<port>
<n>,ALREADY CONNECT
If connection is successful
<n>,CONNECT OK
Otherwise
<n>,CONNECT FAIL
Parameters
<n>
number
<mode>

0..5

A numeric parameter which indicates the connection

A string parameter which indicates the connection type

"TCP"
Establish a TCP connection
"UDP"
Establish a UDP connection
A string parameter which indicates remote server IP

<IP address>
address
<port>
Remote server port
<domain name> A string parameter which indicates remote server domain
name
<state>
A string parameter which indicates the progress of
SIM800 Series_AT Command Manual_V1.02

206

2013-10-23

Smart Machine Smart Decision

connecting
0
1
2
3
4
5

IP INITIAL
IP START
IP CONFIG
IP GPRSACT
IP STATUS
TCP CONNECTING/UDP CONNECTING/
SERVER LISTENING
6
CONNECT OK
7
TCP CLOSING/UDP CLOSING
8
TCP CLOSED/UDP CLOSED
9
PDP DEACT
In Multi-IP state:
0
IP INITIAL
1
IP START
2
IP CONFIG
3
IP GPRSACT
4
IP STATUS
5
IP PROCESSING
9
PDP DEACT
Parameter Saving NO_SAVE
Mode
Max
Time

Response -

Reference

Note
This command allows establishment of a TCP/UDP connection only when
the state is IP INITIAL or IP STATUS when it is in single state. In
multi-IP state, the state is in IP STATUS only. So it is necessary to process
"AT+CIPSHUT" before user establishes a TCP/UDP connection with this
command when the state is not IP INITIAL or IP STATUS.
When module is in multi-IP state, before this command is executed, it is
necessary to process "AT+CSTT, AT+CIICR, AT+CIFSR".

8.2.3 AT+CIPSEND
AT+CIPSEND

Send Data Through TCP or UDP Connection

Send Data Through TCP or UDP Connection

Test Command
Response
AT+CIPSEND=? 1) For single IP connection (+CIPMUX=0)
+CIPSEND: <length>
OK
2) For multi IP connection (+CIPMUX=1)
+CIPSEND: (0-5),<length>

SIM800 Series_AT Command Manual_V1.02

207

2013-10-23

Smart Machine Smart Decision

OK
Parameters
See Write Command
Read Command
AT+CIPSEND?

Response
1) For single IP connection (+CIPMUX=0)
+CIPSEND:<size>
OK
2) For multi IP connection (+CIPMUX=1)
+CIPSEND:<n>,<size>
OK
Parameters
<n>
<size>
a time

A numeric parameter which indicates the connection number

A numeric parameter which indicates the data length sent at

Write Command
1) If single IP
connection
(+CIPMUX=0)
AT+CIPSEND=<
length>

Response
This Command is used to send changeable length data
If single IP is connected (+CIPMUX=0)
If connection is not established or module is disconnected:
If error is related to ME functionality:
+CME ERROR <err>
If sending is successful:
2) If multi IP When +CIPQSEND=0
connection
SEND OK
(+CIPMUX=1)
When +CIPQSEND=1
AT+CIPSEND=< DATA ACCEPT:<length>
If sending fails:
n>[,<length>]
SEND FAIL
If multi IP connection is established (+CIPMUX=1)
If connection is not established or module is disconnected:
If error is related to ME functionality:
+CME ERROR <err>
If sending is successful:
When +CIPQSEND=0
<n>,SEND OK
When +CIPQSEND=1
DATA ACCEPT:<n>,<length>
If sending fails:
<n>,SEND FAIL
Parameters
<n>

A numeric parameter which indicates the connection number

SIM800 Series_AT Command Manual_V1.02

208

2013-10-23

Smart Machine Smart Decision

<length>
A numeric parameter which indicates the length of sending
data, it must be less than <size>
Execution
Command
AT+CIPSEND
response">", then
type data for send,
tap CTRL+Z to
send, tap ESC to
cancel
the
operation

Response
This Command is used to send changeable length data.
If single IP connection is established (+CIPMUX=0)
If connection is not established or module is disconnected:
If error is related to ME functionality:
+CME ERROR <err>
If sending is successful:
When +CIPQSEND=0
SEND OK
When +CIPQSEND=1
DATA ACCEPT:<length>
If sending fails:
SEND FAIL
Note
This Command can only be used in single IP connection mode
(+CIPMUX=0) and to send data on the TCP or UDP connection that has
been established already. Ctrl-Z is used as a termination symbol. ESC is
used to cancel sending data. There are at most <size> bytes which can be
sent at a time.

Parameter Saving NO_SAVE

Mode
Max
Time

Response When +CIPQSEND=0 and the remote server no response, after 645
seconds, CLOSE will be reported.

Reference

Note
The data length which can be sent depends on network status.
Set the time that send data automatically with the Command of
AT+CIPATS.
Only send data at the status of established connection.

8.2.4 AT+CIPQSEND

Select Data Transmitting Mode

AT+CIPQSEND

Select Data Transmitting Mode

Test Command
AT+CIPQSEND
=?

Response
+CIPQSEND: (0,1)
OK
Parameter
See Write Command

Read Command

Response

SIM800 Series_AT Command Manual_V1.02

209

2013-10-23

Smart Machine Smart Decision

AT+CIPQSEND
?

+CIPQSEND: <n>
OK
Parameter
See Write Command

Write Command
AT+CIPQSEND
=<n>

Response
OK
Parameter
<n>
0 Normal mode when the server receives TCP data, it will
responsd SEND OK.
1 Quick send mode when the data is sent to module, it will
responsd DATA ACCEPT:<n>,<length>, while not responding SEND OK.

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note

8.2.5 AT+CIPACK
AT+CIPACK

Query Previous Connection Data Transmitting State

Query Previous Connection Data Transmitting State

Test Command
AT+CIPACK=?

Response
OK

Write Command
If in multi IP
connection
(+CIPMUX=1)
AT+CIPACK=<
n>

Response
+CIPACK: <txlen>, <acklen>, <nacklen>
OK
Parameters
<n>
<txlen>
<acklen>
<nacklen>

A numeric parameter which indicates the connection number

The data amount which has been sent
The data amount confirmed successfully by the server
The data amount without confirmation by the server

Execution
Response
Command
+CIPACK: <txlen>, <acklen>, <nacklen>
If in single IP
connection
OK
(+CIPMUX=0)
Parameters
AT+CIPACK
See Write Command
Parameter Saving NO_SAVE
Mode
Max
Time

Response -

SIM800 Series_AT Command Manual_V1.02

210

2013-10-23

Smart Machine Smart Decision

Reference

Note

8.2.6 AT+CIPCLOSE

Close TCP or UDP Connection

AT+CIPCLOSE

Close TCP or UDP Connection

Test Command
AT+CIPCLOSE
=?

Response
OK

Write Command
1) If single IP
connection
(+CIPMUX=0)

Response:
1) For single IP connection (+CIPMUX=0)
CLOSE OK
2) For multi IP connection (+CIPMUX=1)
<n>, CLOSE OK

AT+CIPCLOSE
=<n>
2) If multi IP
connection
(+CIPMUX=1)
AT+CIPCLOSE
=<id>, [<n>]

Parameters
<n>
0 Slow close
1 Quick close
<id>
A numeric parameter which indicates the connection number

Execution
Command
AT+CIPCLOSE

Response
If close is successfully:
CLOSE OK
If close fails:
ERROR

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note
AT+CIPCLOSE only closes connection at the status of TCP/UDP which
returns CONNECTING or CONNECT OK, otherwise it will return
ERROR, after the connection is closed, the status is IP CLOSE in single IP
mode

8.2.7 AT+CIPSHUT Deactivate GPRS PDP Context

AT+CIPSHUT Deactivate GPRS PDP Context
Test Command
Response
AT+CIPSHUT=? OK
Execution
Command
AT+CIPSHUT

Response
If close is successful:
SHUT OK

SIM800 Series_AT Command Manual_V1.02

211

2013-10-23

Smart Machine Smart Decision

If close fails:
ERROR
Parameter Saving NO_SAVE
Mode
Max
Time

Response 65 seconds

Reference

Note
If this command is executed in multi-connection mode, all of the IP
connection will be shut.
User can close gprs pdp context by AT+CIPSHUT. After it is closed, the
status is IP INITIAL.
If "+PDP: DEACT" urc is reported which means the gprs is released by the
network, then user still needs to execute "AT+CIPSHUT" command to
make PDP context come back to original state.

8.2.8 AT+CLPORT Set Local Port

AT+CLPORT Set Local Port
Test Command
AT+CLPORT=?

Response
1) For single IP connection (+CIPMUX=0)
+CLPORT: ("TCP","UDP"),(0-65535)
OK
2) For multi IP connection (+CIPMUX=1)
+CLPORT: (0-5),("TCP","UDP"),(0-65535)
OK
Parameters
See Write Command

Read Command
AT+CLPORT?

Response
1) For single IP connection (+CIPMUX=0)
+CLPORT: <TCP port>,<UDP port>
OK
2) For multi IP connection (+CIPMUX=1)
+CLPORT: 0,<TCP port>,<UDP port>
+CLPORT: 1,<TCP port>,<UDP port>
+CLPORT: 2,<TCP port>,<UDP port>
+CLPORT: 3,<TCP port>,<UDP port>
+CLPORT: 4,<TCP port>,<UDP port>
+CLPORT: 5,<TCP port>,<UDP port>
OK
Parameters

SIM800 Series_AT Command Manual_V1.02

212

2013-10-23

Smart Machine Smart Decision

See Write Command

Write Command
1) For single IP
connection
(+CIPMUX=0)
AT+CLPORT=<
mode>,<port>
2) For multi IP
connection
(+CIPMUX=1)
AT+CLPORT=<
n>,<mode>,<por
t>

Response
OK
ERROR
Parameters
<n>
0..5
A numeric parameter which indicates the connection
number this used in multi IP connection
<mode>
A string parameter which indicates the connection type
"TCP"
TCP local port
"UDP"
UDP local port
<port>
0-65535 A numeric parameter which indicates the local port
0 is default value, a port can be dynamically allocated a port.

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

8.2.9 AT+CSTT

Note
This command will be effective when module is set as a Client
Start Task and Set APN, USER NAME, PASSWORD

AT+CSTT Start Task and Set APN, USER NAME, PASSWORD

Test Command
AT+CSTT=?

Response
+CSTT: "APN","USER","PWD"
OK
Parameters
See Write Command

Read Command
AT+CSTT?

Response
+CSTT: <apn>,<user name>,<password>
OK
Parameters
See Write Command

Write Command
AT+CSTT=<apn
>,<user
name>,<passwor
d>

Response
OK
ERROR
Parameters
<apn>
name
<user name>
<password>

A string parameter which indicates the GPRS access point

A string parameter which indicates the GPRS user name
A string parameter which indicates the GPRS password

SIM800 Series_AT Command Manual_V1.02

213

2013-10-23

Smart Machine Smart Decision

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Execution
Command
AT+CSTT

Response
OK
ERROR

Reference

Note
The write command and execution command of this command is valid only
at the state of IP INITIAL. After this command is executed, the state will be
changed to IP START.

8.2.10 AT+CIICR
AT+CIICR

Bring Up Wireless Connection with GPRS or CSD

Bring Up Wireless Connection with GPRS or CSD

Test Command
AT+CIICR=?

Response
OK

Execution
Command
AT+CIICR

Response
OK
ERROR

Parameter Saving NO_SAVE

Mode
Max
Time

Response 85 seconds

Reference

Note
AT+CIICR only activates moving scene at the status of IP START, after
operating this Command is executed, the state will be changed to IP
CONFIG.
After module accepts the activated operation, if it is activated successfully,
module state will be changed to IP GPRSACT, and it responds OK,
otherwise it will respond ERROR.

8.2.11 AT+CIFSR
AT+CIFSR

Get Local IP Address

Get Local IP Address

Test Command
AT+CIFSR=?

Response
OK

Execution
Command
AT+CIFSR

Response
<IP address>
ERROR
Parameter
<IP address> a string parameter which indicates the IP address assigned
from GPRS or CSD.

SIM800 Series_AT Command Manual_V1.02

214

2013-10-23

Smart Machine Smart Decision

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note
Only after PDP context is activated, local IP Address can be obtained by
AT+CIFSR, otherwise it will respond ERROR. The active status are IP
GPRSACT, TCP/UDP CONNECTING, CONNECT OK, IP CLOSE.

8.2.12 AT+CIPSTATUS
AT+CIPSTATUS

Query Current Connection Status

Query Current Connection Status

Test Command
Response
AT+CIPSTATUS OK
=?
Write Command
If multi IP
connection mode
(+CIPMUX=1)
AT+CIPSTATU
S=<n>

Response
+CIPSTATUS: <n>,<bearer>, <TCP/UDP>, <IP address>, <port>,
<client state>
OK
Parameters
See Execution Command

Execution
Response
Command
1If in single connection mode (+CIPMUX=0)
AT+CIPSTATUS OK
STATE: <state>
2) If in multi-connection mode (+CIPMUX=1)
OK
STATE: <state>
If the module is set as server
S: 0, <bearer>, <port>, <server state>
C: <n>,<bearer>, <TCP/UDP>, <IP address>, <port>, <client state>
Parameters
<n>
number
<bearer>
<server state>

<client state>

0-5 A numeric parameter which indicates the connection

0-1 GPRS bearer, default is 0
OPENING
LISTENING
CLOSING
INITIAL
CONNECTING
CONNECTED

SIM800 Series_AT Command Manual_V1.02

215

2013-10-23

Smart Machine Smart Decision

<state>
connecting

REMOTE CLOSING
CLOSING
CLOSED
A string parameter which indicates the progress of
0
1
2
3
4
5

IP INITIAL
IP START
IP CONFIG
IP GPRSACT
IP STATUS
TCP CONNECTING/UDP CONNECTING
/SERVER LISTENING
6
CONNECT OK
7
TCP CLOSING/UDP CLOSING
8
TCP CLOSED/UDP CLOSED
9
PDP DEACT
In Multi-IP state:
0
IP INITIAL
1
IP START
2
IP CONFIG
3
IP GPRSACT
4
IP STATUS
5
IP PROCESSING
9
PDP DEACT
Parameter Saving NO_SAVE
Mode
Max
Time

Response -

Reference

Note

8.2.13 AT+CDNSCFG Configure Domain Name Server

AT+CDNSCFG Configure Domain Name Server
Test Command
Response
AT+CDNSCFG= +CDNSCFG: ("Primary DNS"),("Secondary DNS")
?
OK
Parameter
See Write Command
Read Command
Response
AT+CDNSCFG? PrimaryDns: <pri_dns>
SecondaryDns: <sec_dns>

SIM800 Series_AT Command Manual_V1.02

216

2013-10-23

Smart Machine Smart Decision

OK
Parameter
See Write Command
Write Command
AT+CDNSCFG=
<pri_dns>
[,<sec_dns>]

Response
OK
ERROR
Parameters
<pri_dns>
A string parameter which indicates the IP address of the
primary domain name server
<sec_dns>
A string parameter which indicates the IP address of the
secondary domain name server

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note

8.2.14 AT+CDNSGIP Query the IP Address of Given Domain Name

AT+CDNSGIP Query the IP Address of Given Domain Name
Test Command
AT+CDNSGIP=
?

Response
OK

Write Command
AT+CDNSGIP=
<domain name>

Response
OK
ERROR
If successful, return:
+CDNSGIP: 1, <domain name>,<IP1>[,<IP2>]
If fail, return:
+CDNSGIP:0,<dns error code>
Parameters
<domain name>
A string parameter which indicates the domain name
<IP1>
A string parameter which indicates the first IP address
corresponding to the domain name
<IP2>
A string parameter which indicates the second IP address
corresponding to the domain name
<dns error code>
A numeric parameter which indicates the error code
8
DNS COMMON ERROR
There are some other error codes as well.

Parameter Saving NO_SAVE

Mode
Max

Response -

SIM800 Series_AT Command Manual_V1.02

217

2013-10-23

Smart Machine Smart Decision

Time
Reference

Note

8.2.15 AT+CIPHEAD
AT+CIPHEAD

Add an IP Head at the Beginning of a Package Received

Add an IP Head at the Beginning of a Package Received

Test Command
AT+CIPHEAD=
?

Response
+CIPHEAD: (list of supported <mode>s)
OK
Parameter
See Write Command

Read Command
AT+CIPHEAD?

Response
+CIPHEAD: <mode>
OK
Parameter
See Write Command

Write Command
AT+CIPHEAD=
<mode>

Response
OK
ERROR
Parameter
<mode>
A numeric parameter which indicates whether an IP header
is added to the received data or not.
0
Not add IP header
1
Add IP header, the format is:
1) For single IP connection (+CIPMUX=0)
+IPD,<data length>:
2) For multi IP connection (+CIPMUX=1)
+RECEIVE,<n>,<data length>:

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note

8.2.16 AT+CIPATS
AT+CIPATS

Set Auto Sending Timer

Set Auto Sending Timer

Test Command
AT+CIPATS=?

Response
+CIPATS: (list of supported <mode>s),(list of supported <time>)

SIM800 Series_AT Command Manual_V1.02

218

2013-10-23

Smart Machine Smart Decision

OK
Parameters
See Write Command
Read Command
AT+CIPATS?

Response
+CIPATS: <mode>,<time>
OK
Parameters
See Write Command

Write Command Response

AT+CIPATS=<m OK
ode>[,<time>]
ERROR
Parameters
<mode>
A numeric parameter which indicates whether set timer when
module is sending data
0 Not set timer when module is sending data
1 Set timer when module is sending data
<time>
1..100
A numeric parameter which indicates the seconds
after which the data will be sent
Parameter Saving NO_SAVE
Mode
Max
Time

Response -

Reference

Note

8.2.17 AT+CIPSPRT Set Prompt of > When Module Sends Data

AT+CIPSPRT Set Prompt of > When Module Sends Data
Test Command
Response
AT+CIPSPRT=? +CIPSPRT: (list of supported <send prompt>s)
OK
Parameter
See Write Command
Read Command
AT+CIPSPRT?

Response
+CIPSPRT: <send prompt>
OK
Parameter
See Write Command

Write Command Response

AT+CIPSPRT=< OK

SIM800 Series_AT Command Manual_V1.02

219

2013-10-23

Smart Machine Smart Decision

send prompt>

ERROR
Parameter
<send prompt> A numeric parameter which indicates whether to echo
prompt > after module issues AT+CIPSEND command.
0 It shows "send ok" but does not prompt echo > when sending is
successful.
1 It prompts echo > and shows "send ok" when sending is
successful.
2 It neither prompts echo > nor shows "send ok" when sending is
successful.

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note

8.2.18 AT+CIPSERVER
AT+CIPSERVER
Test Command
AT+CIPSERVE
R=?

Configure Module as Server

Configure Module as Server

Response
+CIPSERVER: (0-CLOSE SERVER, 1-OPEN SERVER),(1-65535)
OK
Parameters
See Write Command

Read Command
AT+CIPSERVE
R?

Response
+CIPSERVER: <mode>[,<port>,<channel id>,<bearer>]
OK
Parameters
See Write Command

Write Command
AT+CIPSERVE
R=<mode>[,<por
t>]

Response
OK
ERROR
Parameters
<mode>

0
Close server
1 Open server
<port>
1..65535 Listening port
<channel id> Channel id
<bearer>
GPRS bearer
Parameter Saving NO_SAVE
Mode

SIM800 Series_AT Command Manual_V1.02

220

2013-10-23

Smart Machine Smart Decision

Max
Time

Response -

Reference

Note
This command is allowed to establish a TCP server only when the state is IP
INITIAL or IP STATUS when it is in single state. In multi-IP state, the state
is in IP STATUS only.

8.2.19 AT+CIPCSGP Set CSD or GPRS for Connection Mode

AT+CIPCSGP Set CSD or GPRS for Connection Mode
Test Command
Response
AT+CIPCSGP=? +CIPCSGP:0-CSD,DIALNUMBER,USER
NAME,PASSWORD,RATE(0-3)
+CIPCSGP: 1-GPRS,APN,USER NAME,PASSWORD
OK
Parameters
See Write Command
Read Command
AT+CIPCSGP?

Response
+CIPCSGP: <mode>, <apn>, <user name>, <password>[,<rate>]
OK
Parameters
See Write Command

Write Command
AT+CIPCSGP=<
mode>[,
(<apn>,<user
name>,
<password>),(<d
ial
number>,<user
name>,<passwor
d>,<rate>)]

Response
OK
ERROR
Parameters
<mode>
mode

A numeric parameter which indicates the wireless connection

0 set CSD as wireless connection mode

1 set GPRS as wireless connection mode
GPRS parameters:
<apn>
A string parameter which indicates the access point name
<user name> A string parameter which indicates the user name
<password> A string parameter which indicates the password CSD
parameters:
<dial number> A string parameter which indicates the CSD dial numbers
<user name> A string parameter which indicates the CSD user name
<password> A string parameter which indicates the CSD password
<rate>
A numeric parameter which indicates the CSD connection
rate
0 2400
1 4800

SIM800 Series_AT Command Manual_V1.02

221

2013-10-23

Smart Machine Smart Decision

2 9600
3 14400
Parameter Saving NO_SAVE
Mode
Max
Time

Response -

Reference

Note

8.2.20 AT+CIPSRIP Show Remote IP Address and Port When Received Data
AT+CIPSRIP Show Remote IP Address and Port When Received Data
Test Command
AT+CIPSRIP=?

Response
+CIPSRIP: (list of supported <mode>s)
OK
Parameter
See Write Command

Read Command
AT+CIPSRIP?

Response
+CIPSRIP: <mode>
OK
Parameter
See Write Command

Write Command
AT+CIPSRIP=<
mode>

Response
OK
ERROR
Parameter
<mode>
port.

A numeric parameter which shows remote IP address and

0 Do not show the prompt

1 Show the prompt, the format is as follows:
1) For single IP connection (+CIPMUX=0)
+RECV FROM:<IP ADDRESS>:<PORT>
1) For multi IP connection (+CIPMUX=1)
+RECEIVE,<n>,<data length>,<IP ADDRESS>:<PORT>
Parameter Saving NO_SAVE
Mode
Max
Time

Response -

Reference

SIM800 Series_AT Command Manual_V1.02

222

2013-10-23

Smart Machine Smart Decision

8.2.21 AT+CIPDPDP Set Whether to Check State of GPRS Network Timing

AT+CIPDPDP Set Whether to Check State of GPRS Network Timing
Test Command
Response
AT+CIPDPDP=? +CIPDPDP: (list of supported<mode>s, list of supported <interval>, list
of supported <timer>)
OK
Parameters
See Write Command
Read Command
AT+CIPDPDP?

Response
+CIPDPDP: <mode>, <interval>, <timer>
OK
Parameters
See Write Command

Write Command
AT+CIPDPDP=<
mode>[,<interval
>,<timer>]

Response
OK
ERROR
Parameters
<mode>
0 Not set detect PDP
1 Set detect PDP
<interval>
1<=interval<=180(s)
<timer>
1<=timer<=10

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note
If "+PDP: DEACT" urc is reported because of module not attaching to gprs
for a certain time or other reasons, user still needs to execute
"AT+CIPSHUT" command makes PDP context come back to original state.

8.2.22 AT+CIPMODE
AT+CIPMODE

Select TCPIP Application Mode

Select TCPIP Application Mode

Test Command
Response
AT+CIPMODE= +CIPMODE: (0-NORMAL MODE,1-TRANSPARENT MODE)
?
OK

SIM800 Series_AT Command Manual_V1.02

223

2013-10-23

Smart Machine Smart Decision

Parameter
See Write Command
Read Command
Response
AT+CIPMODE? +CIPMODE: <mode>
OK
Parameter
See Write Command
Write Command Response
AT+CIPMODE= OK
<mode>
ERROR
Parameter
<mode>

0 Normal mode
1 Transparent mode

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note

8.2.23AT+CIPCCFG Configure Transparent Transfer Mode

AT+CIPCCFG Configure Transparent Transfer Mode
Test Command
AT+CIPCCFG=
?

Response
+CIPCCFG:
(NmRetry:3-8),(WaitTm:2-10),(SendSz:1-1460),(esc:0,1) ,(Rxmode:0,1),
(RxSize:50-1460),(Rxtimer:20-1000)
OK
Parameters
See Write Command

Read Command
AT+CIPCCFG?

Response
+CIPCCFG:
<NmRetry>,<WaitTm>,<SendSz>,<esc>,<Rxmode>,<RxSize>,<Rxtime
r>
OK
Parameters
See Write Command

Write Command Response

AT+CIPCCFG= OK
<NmRetry>,<Wa ERROR

SIM800 Series_AT Command Manual_V1.02

224

2013-10-23

Smart Machine Smart Decision

itTm>,<SendSz>,
<esc>[,<Rxmode
>,<RxSize>,<Rxt
imer>]

Parameters
<NmRetry>
Number of retries to be made for an IP packet.
<WaitTm>
Number of 200ms intervals to wait for serial input before
sending the packet.
<SendSz>
Size in bytes of data block to be received from serial port
before sending.
<esc>
Whether turn on the escape sequence, default is TRUE.
0
Turn off the escape sequence
1
Turn on the escape sequence
<Rxmode>
Whether to set time interval during output data from serial
port.
0 output data to serial port without interval
1 output data to serial port within <Rxtimer> interval.
<RxSize>
Output data length for each time, default value is 1460.
<Rxtimer>
Time interval (ms) to wait for serial port to output data
again. Default value: 50ms

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note
This command will be effective only in single connection mode
(+CIPMUX=0)

8.2.24 AT+CIPSHOWTP Display Transfer Protocol in IP Head When Received Data

AT+CIPSHOWTP

Display Transfer Protocol in IP Head When Received Data

Test Command
Response
AT+CIPSHOWTP +CIPSHOWTP: (list of supported <mode>s)
=?
OK
Parameter
See Write Command
Read Command
Response
AT+CIPSHOWTP +CIPSHOWTP: <mode>
?
OK
Parameter
See Write Command
Write Command
Response
AT+CIPSHOWTP OK
=<mode>
ERROR
Parameter

SIM800 Series_AT Command Manual_V1.02

225

2013-10-23

Smart Machine Smart Decision

<mode>
A numeric parameter which indicates whether to display
transfer protocol in IP header to received data or not
0 Not display transfer protocol
1 Display transfer protocol, the format is "+IPD,
<data size>,<TCP/UDP>:<data>"
Parameter
Mode

Saving NO_SAVE

Max Response Time Reference

Note
This command will be effective only in single connection mode
(+CIPMUX=0)
Only when +CIPHEAD is set to 1, the setting of this command will work..

8.2.25 AT+CIPUDPMODE
AT+CIPUDPMODE

UDP Extended Mode

UDP Extended Mode

Test Command
Response
AT+CIPUDPMOD 1) For single IP connection (+CIPMUX=0)
E=?
+CIPUDPMODE: (0-2),("(0-255).(0-255).(0-255).(0-255)"),(1-65535)
OK
2) For multi IP connection (+CIPMUX=1)
+CIPUDPMODE:
(0-5),(0-2),("(0-255).(0-255).(0-255).(0-255)"),(1-65535)
OK
Parameters
See Write Command
Read Command
Response
AT+CIPUDPMOD 1) For single IP connection (+CIPMUX=0)
E?
+CIPUDPMODE: <mode> [,<IP address>,<Port>]
OK
2) For multi IP connection (+CIPMUX=1)
+CIPUDPMODE: 0, <mode> [,<IP address>,<Port>]
+CIPUDPMODE: 1,<mode> [,<IP address>,<Port>]
+CIPUDPMODE: 2,<mode> [,<IP address>,<Port>]
+CIPUDPMODE: 3,<mode> [,<IP address>,<Port>]
+CIPUDPMODE: 4,<mode> [,<IP address>,<Port>]
+CIPUDPMODE: 5,<mode> [,<IP address>,<Port>]
OK
Parameter
See Write Command

SIM800 Series_AT Command Manual_V1.02

226

2013-10-23

Smart Machine Smart Decision

Write Command
1) For single IP
connection
(+CIPMUX=0)
AT+CIPUDPMOD
E=<mode>[,<IP
address>,<Port>]
2) For multi IP
connection
(+CIPMUX=1)
AT+CIPUDPMOD
E=<n>,<mode>[,<I
P
address>,<Port>]
Parameter Saving
Mode

Response
OK
ERROR
<n>
number
<mode>

0-5 A numeric parameter which indicates the connection

0

UDP Normal Mode

1
UDP Extended Mode
2
Set UDP address to be sent
<IP address> A string parameter which indicates remote IP address
<port>
Remote port

NO_SAVE

Max Response Time Reference

Note

8.2.26 AT+CIPRXGET Get Data from Network Manually

AT+CIPRXGET Get Data from Network Manually
Test Command
Response
AT+CIPRXGET If single IP connection (+CIPMUX=0)
+CIPRXGET: (list of supported <mode>s),(list of supported <reqlength>)
=?
OK
If multi IP connection (+CIPMUX=1)
+CIPRXGET: (list of supported <mode>s), (list of supported <id>s), (list
of supported <reqlength>)
OK
Parameters
See Write Command
Read Command
Response
AT+CIPRXGET +CIPRXGET: <mode>
?
OK
Parameters
See Write Command
Write Command
1) If single IP
connection

Response
OK
ERROR

SIM800 Series_AT Command Manual_V1.02

227

2013-10-23

Smart Machine Smart Decision

(+CIPMUX=0)
AT+CIPRXGET
=<mode>[,<reqle
ngth >]
2) If multi IP
connection
(+CIPMUX=1)
AT+CIPRXGET
=<mode>[,<id>,<
reqlength >]

1)For single IP connection

If AT+CIPSRIP=1 is set, IP address and port are contained.
if <mode>=1
+CIPRXGET: 1[,<IP ADDRESS>:<PORT>]
if <mode>=2
+CIPRXGET: 2,<reqlength>,<cnflength>[,<IP ADDRESS>:<PORT>]
1234567890
OK
if <mode>=3
+CIPRXGET: 3,<reqlength>,<cnflength>[,<IP ADDRESS>:<PORT>]
5151
OK
if <mode>=4
+CIPRXGET: 4, <cnflength>
OK
2)For multi IP connection
If AT+CIPSRIP=1 is set, IP address and port is contained.
if <mode>=1
+CIPRXGET: 1[,<id>,<IP ADDRESS>:<PORT>]
if <mode>=2
+CIPRXGET:
2,<id>,<reqlength>,<cnflength>[,<IP
ADDRESS>:<PORT>]
1234567890
OK
if <mode>=3
+CIPRXGET:
3,<id>,<reqlength>,<cnflength>[,<IP
ADDRESS>:<PORT>]
5151
OK
if <mode>=4
+CIPRXGET: 4, <id>,<cnflength>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<mode>
0
Disable getting data from network manually, the module is
set to normal mode, data will be pushed to TE directly.
1
Enable getting data from network manually.
2
The module can get data, but the length of output data can
not exceed 1460 bytes at a time.

SIM800 Series_AT Command Manual_V1.02

228

2013-10-23

Smart Machine Smart Decision

3
Similar to mode 2, but in HEX mode, which means the
module can get 730 bytes maximum at a time.
4
Query how many data are not read with a given ID.
<id>
A numeric parameter which indicates the connection number
<reqlength> Requested number of data bytes (1-1460 bytes)to be read
<cnflength> Confirmed number of data bytes to be read, which may be less
than <length>. 0 indicates that no data can be read.
Parameter Saving NO_SAVE
Mode
Max
Time

Response -

Reference

Note
To enable this function, parameter <mode> must be set to 1 before
connection.

8.2.27 AT+CIPSCONT Save TCPIP Application Context

AT+CIPSCONT Save TCPIP Application Context
Read Command
AT+CIPSCONT
?

Response
TA returns TCPIP Application Context, which consists of the following
AT Command parameters.
+CIPSCONT: <mode0>
+CIPCSGP: <mode>
Gprs Config APN: <apn>
Gprs Config UserId: <user name>
Gprs Config Password: <password>
+CIPHEAD: <mode>
+CIPSHOWTP: <mode>
+CIPSRIP: <mode>
+CIPATS: <mode>,<time>
+CIPSPRT: <send prompt>,<notshowsendok>
+CIPQSEND: <n>
+CIPMODE: <mode>
+CIPCCFG:
<NmRetry>,<WaitTm>,<SendSz>,<esc>,<Rxmode>,<RxSize>,<Rxti
mer>
+CIPMUX: <n>
+CIPDPDP: <mode>, <interval>, <timer>
+CIPRXGET: <mode>
+CIPRDTIMER: <rdsigtimer>,<rdmuxtimer>
OK

SIM800 Series_AT Command Manual_V1.02

229

2013-10-23

Smart Machine Smart Decision

Parameters
<mode0>

0 Saved, the value from NVRAM

1 Unsaved, the value from RAM

For other parameters, see the related command.

Execution
Command
AT+CIPSCONT

Response
Module saves current TCPIP Application Contexts to NVRAM. When
system is rebooted, the parameters will be loaded automatically.
OK

Parameter Saving
Mode

NO_SAVE

Max
Time

Response

Reference

Note

8.2.28 AT+CIPRDTIMER
AT+CIPRDTIMER
Test Command
AT+CIPRDTIM
ER=?

Set Remote Delay Timer

Set Remote Delay Timer

Response
+CIPRDTIMER: (100-4000),(100-7000)
OK
Parameter
See Write Command

Read Command
AT+CIPRDTIM
ER?

Response
+CIPRDTIMER: <rdsigtimer>,<rdmuxtimer>
OK
Parameter
See Write Command

Write Command
AT+CIPRDTIM
ER=<rdsigtimer
>,<rdmuxtimer>

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<rdsigtimer> remote delay timer of single connection.
<rdmuxtimer> remote delay timer of multi-connections.

Parameter Saving NO_SAVE

Mode

SIM800 Series_AT Command Manual_V1.02

230

2013-10-23

Smart Machine Smart Decision

Max
Time

Response -

Reference

Note
This command is used to shorten the disconnect time locally when the
remote server has been disconnected.

8.2.29 AT+CIPSGTXT

Select GPRS PDP context

AT+CIPSGTXT

Select GPRS PDP context

Test Command
AT+CIPSGTXT
=?

Response
+CIPSGTXT: (0,1)
OK
Parameter
See Write Command

Write Command
AT+CIPSGTXT
=<mode>

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<mode> 0 select first PDP context
1 select second PDP context

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note
This command is used to select pdp context, only for multi IP connection
(+CIPMUX=1).

SIM800 Series_AT Command Manual_V1.02

231

2013-10-23

Smart Machine Smart Decision

9 AT Commands for IP Application

9.1 Overview
Command

Description

AT+SAPBR

Bearer settings for applications based on IP

9.2 Detailed Descriptions of Commands

9.2.1 AT+SAPBR
AT+SAPBR

Bearer Settings for Applications Based on IP

Bearer Settings for Applications Based on IP

Test Command
AT+SAPBR=?

Response
+SAPBR: (0-4),(1-3), "ConParamTag","ConParamValue"
OK
Parameters
See Write Command

Write Command
AT+SAPBR=<c
md_type>,<cid>[
,<ConParamTag
>,<ConParamVa
lue>]

Response
OK
If<cmd_type> = 2
+SAPBR: <cid>,<Status>,<IP_Addr>
OK
If <cmd_type>=4
+SAPBR:
<ConParamTag>,<ConParamValue>
OK
Unsolicited Result Code
+SAPBR <cid>: DEACT
Parameters
<cmd_type>
0
1
2
3
4
<cid>
<Status>

Close bearer
Open bearer
Query bearer
Set bearer parameters
Get bearer parameters

Bearer profile identifier

0

Bearer is connecting

SIM800 Series_AT Command Manual_V1.02

232

2013-10-23

Smart Machine Smart Decision

1 Bearer is connected
2 Bearer is closing
3 Bearer is closed
<ConParamTag> Bearer parameter
"CONTYPE"
Type of Internet connection. Value refer to
<ConParamValue_ConType>
"APN"
Access point name string: maximum 64
characters
"USER"
User name string: maximum 32 characters
"PWD"
Password string: maximum 32 characters
"PHONENUM" Phone number for CSD call
"RATE"
CSD connection rate. For value refer to
<ConParamValue_Rate>
<ConParamValue>
Bearer paramer value
<ConParamValue_ConType>
"CSD"
Circuit-switched data call.
"GPRS" GPRS connection.
<ConParamValue_Rate>
0 2400
1 4800
2 9600
3 14400
<IP_Addr>
The IP address of bearer
Parameter Saving NO_SAVE
Mode
Max
Time

Response When <cmd_type> is 1, 85 seconds

When <cmd_type> is 0, 65 seconds

Reference

Note
This command is applied to activate some applications such as HTTP, FTP.

SIM800 Series_AT Command Manual_V1.02

233

2013-10-23

Smart Machine Smart Decision

10 AT Commands for PING Support

10.1 Overview
Command

Description

AT+CIPPING

Ping request

AT+CIPCTL

Set the mode when receiving an IP packet

AT+CIPFLT

Set the rules of IP filter

10.2 Detailed Descriptions of Commands

10.2.1 AT+CIPPING PING Request

AT+CIPPING

PING Request

Test Command
AT+CIPPING=?

Response
+CIPPING: (list of supported <retryNum>s),(list of supported
<dataLen>s),(list of supported <timeout>s),(list of supported <ttl>s)
OK
Parameters
See Write Command

Read Command
AT+CIPPING?

Response
+CIPPING: <retryNum>,<dataLen>,<timeout>,<ttl>
OK
Parameters
See Write Command

Write Command
AT+CIPPING=<IP
addr>[,<retryNum
>[,<dataLen>[,<ti
meout>[,<ttl>]]]]

Response
+CIPPING: <replyId>,<Ip Address>,<replyTime>,<ttl>[<CR><LF>
+CIPPING: <replyId>,<Ip Address>,<replyTime>,<ttl>
[...]]
OK
or
ERROR
or
+CME ERROR: <err>

SIM800 Series_AT Command Manual_V1.02

234

2013-10-23

Smart Machine Smart Decision

Parameters
<IPaddr>

Address of the remote host,string type.This

parameter can be either:
- IP address in the format:xxx.xxx.xxx.xxx
- Host name solved by a DNS query
<retryNum>
The number of Ping Echo Requset to send
1-100
Default: 4
<dataLen>
The length of Ping Echo Request data
0-1024 Default: 32
<timeout>
The timeout,in units of 100 ms,waiting for a single
Echo Reply
1-600
Default: 100(10 seconds)
<ttl>
Time to live
1-255
Default: 64
<replyId>
Echo Reply number
<IP Address>
IP Address of the remote host
<replyTime>
Time,in units of 100 ms, required to receive the
response
Parameter
Mode

Saving NO_SAVE

Max Response Time Reference

Note
z Before sending PING Request the GPRS context must be activated.
z When the Echo Request timeout expires (no reply received on
time), the response will contains <replyTime> setting to 600 and
<ttl> setting to 255.
z When executing this command, if PDP context is deactivated for
some reasons, such as out of service, etc.,the +PDP: DEACT
URC is reported and the command will end immediately.

10.2.2 AT+CIPCTL Set the Mode When Receiving an IP Packet

AT+CIPCTL

Set the Mode When Receiving an IP Packet

Test Command
AT+CIPCTL=?

Response
+CIPCTL: (list of supported <mode>s)
OK
Parameters
See Write Command

Read Command
AT+CIPCTL?

Response
+CIPCTL: <mode>

SIM800 Series_AT Command Manual_V1.02

235

2013-10-23

Smart Machine Smart Decision

OK

Parameters
See Write Command
Write Command
Response
AT+CIPCTL=<mod OK
or
e>
ERROR
or
+CME ERROR: <err>
Parameters
<mode>

Parameter
Mode

0
Disable to send Echo Reply
1
Enable to send Echo Reply to every IP address
pinging it
2
Enable to send Echo Reply only to a subset of IP
Addresses pinging it. This subset of IP Addresses
can be set by AT+CIPFLT command.

Saving NO_SAVE

Max Response Time

Reference

Note
The value of <mode> is stored in non volatile memory.

10.2.3 AT+CIPFLT Set the Rules of IP Filter

AT+CIPFLT Set the Rules of IP Filter

Test Command
AT+CIPFLT=?

Response
+CIPFLT: (list of supported <action>s),(list of supported <item>s)
OK
Parameter
See Write Command

Read Command
AT+CIPFLT?

Response
+CIPFLT: <item>,<ipAddr>,<mask>
[<CR><LF>+CIPFLT: <item>,<ipAddr>,<mask>
[]]
OK
Parameter
See Write Command

SIM800 Series_AT Command Manual_V1.02

236

2013-10-23

Smart Machine Smart Decision

Write Command
AT+CIPFLT=<actio
n>[,<item>][,
<ipAddr>,<mask>]

Response
OK
or
ERROR
or
+CME ERROR: <err>
Parameter
<action>

0
1

2
<item>

Remove the rule specified by <item>.

<item> must be given.
Add the rule specified by <item>.
If <item> is not given, it can find an empty item
automatically. <ipAddr> and <mask> must be given.
Delete all of rules
The item of IP filter rule

1-20
<ipAddr>
<mask>

Parameter
Mode

Remote IP address,string type. It can be any valid IP

address in the format of xxx.xxx.xxx.xxx
Mask to be applied to the<ipAddr>,string type.
It can be any valid IP address mask in the
format of xxx.xxx.xxx.xxx

Saving NO_SAVE

Max Response Time

Reference

Note
z When a packet comes from the IP address coming_IP, All rules
will be scanned to match the following criteria:
<coming_IP> & <mask> = <ipAddr> & <mask>
If the criteria is matched, the IP packet will be accepted and the rule
scan is finished. If the criteria is not matched, the IP packet will be
ignored.
z The rule is stored in non volatile memory.

SIM800 Series_AT Command Manual_V1.02

237

2013-10-23

Smart Machine Smart Decision

11 AT Commands for HTTP Application

SIM800 series has an embedded TCP/IP stack that is driven by AT commands and enables the
host application to easily access the Internet HTTP service. This chapter is a reference guide to
all the AT commands and responses defined to use with the TCP/IP stack in HTTP Service.

11.1 Overview
Command

Description

AT+HTTPINIT

Initialize HTTP service

AT+HTTPTERM

Terminate HTTP service

AT+HTTPPARA

Set HTTP parameters value

AT+HTTPDATA

Input HTTP data

AT+HTTPACTION

HTTP method action

AT+HTTPREAD

Read the HTTP server response

AT+HTTPSCONT

Save HTTP application context

AT+HTTPSTATUS

Read HTTP status

11.2 Detailed Descriptions of Commands

11.2.1 AT+HTTPINIT Initialize HTTP Service
AT+HTTPINIT Initialize HTTP Service
Test Command
Response
AT+HTTPINIT= OK
?
Execution
Command
AT+HTTPINIT

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note
HTTPINIT should first be executed to initialize the HTTP service.

SIM800 Series_AT Command Manual_V1.02

238

2013-10-23

Smart Machine Smart Decision

11.2.2 AT+HTTPTERM
AT+HTTPTERM

Terminate HTTP Service

Terminate HTTP Service

Test Command
AT+HTTPTER
M=?

Response
OK

Execution
command
AT+HTTPTER
M

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note

11.2.3 AT+HTTPPARA Set HTTP Parameters Value

AT+HTTPPARA Set HTTP Parameters Value
Test Command
Response
AT+HTTPPARA +HTTPPARA: "HTTPParamTag","HTTPParmValue"
=?
OK
Parameters
See Write Command
Read Command
Response
AT+HTTPPARA +HTTPPARA:
?
<HTTPParamTag>,<HTTPParamValue>
OK
Parameters
See Write Command
Write Command
AT+HTTPPARA
=<HTTPParamT
ag>,<HTTPPara
mValue>

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<HTTPParamTag>

HTTP Parameter

"CID" (Mandatory Parameter) Bearer profile identifier

SIM800 Series_AT Command Manual_V1.02

239

2013-10-23

Smart Machine Smart Decision

"URL" (Mandatory Parameter) HTTP client URL

"http://'server'/'path':'tcpPort' "
"server": FQDN or IP-address
"path": path of file or directory
"tcpPort": default value is 80.
Refer to "IETF-RFC 2616".
"UA" The user agent string which is set by the
application to identify the mobile. Usually this
parameter is set as operation system and software
version information.
Default value is "SIMCom_MODULE".
"PROIP" The IP address of HTTP proxy server
"PROPORT" The port of HTTP proxy server
"REDIR" This flag controls the redirection mechanism of the
SIM800 when it is acting as HTTP client
(numeric). If the server sends a redirect code
(range 30x), the client will automatically send a
new HTTP request when the flag is set to (1).
Default value is 0 (no redirection).
"BREAK" Parameter for HTTP method "GET", used for
resuming broken transfer.
"BREAKEND" Parameter for HTTP method "GET", used for
resuming broken transfer. which is used together
with "BREAK",
If the value of "BREAKEND" is bigger than
"BREAK", the transfer scope is from "BREAK" to
"BREAKEND".
If the value of "BREAKEND" is smaller than
"BREAK", the transfer scope is from "BREAK" to
the end of the file.
"TIMEOUT" If both "BREAKEND" and "BREAK" are 0, the
resume broken transfer function is disabled.
HTTP session timeout value, scope: 30-1000
second.
Default value is 120 seconds.
HTTP Parameter value. Type and supported
content depend on related <HTTPParamTag>.
"CONTENT" Used to set the Content-Type field in HTTP
header.
<HTTPParamValue> HTTP Parameter value.Type and supported content
depend on related <HTTPParamTag>.
Parameter Saving NO_SAVE
Mode

SIM800 Series_AT Command Manual_V1.02

240

2013-10-23

Smart Machine Smart Decision

Max
Time

Response -

Reference

Note
Not all the HTTP Server supports "BREAK" and "BREAKEND"
parameters

11.2.4 AT+HTTPDATA Input HTTP Data

AT+HTTPDATA Input HTTP Data
Test Command
Response
AT+HTTPDATA +HTTPDATA: (list of supported <size>s),(list of supported <time>s)
=?
OK
Parameters
See Write Command
Write Command Response
AT+HTTPDATA DOWNLOAD
=<size>,<time>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<size>
Size in bytes of the data to POST.
1-319488 (bytes)
0 means delete all the content.
<time>
1000-120000 (millisecond) Maximum time in milliseconds to
input data.
Parameter Saving NO_SAVE
Mode
Max
Time

Response -

Reference

Note
It is strongly recommended to set enough time to input all data with the
length of <size>.

11.2.5 AT+HTTPACTION
AT+HTTPACTION
Test Command
AT+HTTPACTI
ON=?

HTTP Method Action

HTTP Method Action

Response
+HTTPACTION: (0-2)
OK

SIM800 Series_AT Command Manual_V1.02

241

2013-10-23

Smart Machine Smart Decision

Parameter
See Write Command
Write Command
AT+HTTPACTI
ON=<Method>

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Unsolicited Result Code
+HTTPACTION: <Method>,<StatusCode>,<DataLen>
Parameter
<Method>

HTTP method specification:

0 GET
1 POST
2 HEAD
<StatusCode> HTTP Status Code responded by remote server, it
identifier refer to HTTP1.1(RFC2616)
100 Continue
101 Switching Protocols
200 OK
201 Created
202 Accepted
203 Non-Authoritative Information
204 No Content
205 Reset Content
206 Partial Content
300 Multiple Choices
301 Moved Permanently
302 Found
303 See Other
304 Not Modified
305 Use Proxy
307 Temporary Redirect
400 Bad Request
401 Unauthorized
402 Payment Required
403 Forbidden
404 Not Found
405 Method Not Allowed
406 Not Acceptable
407 Proxy Authentication Required
408 Request Time-out
409 Conflict
410 Gone

SIM800 Series_AT Command Manual_V1.02

242

2013-10-23

Smart Machine Smart Decision

<DataLen>

411 Length Required

412 Precondition Failed
413 Request Entity Too Large
414 Request-URI Too Large
415 Unsupported Media Type
416 Requested range not satisfiable
417 Expectation Failed
500 Internal Server Error
501 Not Implemented
502 Bad Gateway
503 Service Unavailable
504 Gateway Time-out
505 HTTP Version not supported
600 Not HTTP PDU
601 Network Error
602 No memory
603 DNS Error
604 Stack Busy
the length of data got

Parameter Saving NO_SAVE

Mode
Max
Time

Response About 5 seconds in test, dependence on network status and the size of
request website

Reference

Note

11.2.6 AT+HTTPREAD
AT+HTTPREAD
Test Command
AT+HTTPREA
D=?

Read the HTTP Server Response

Read the HTTP Server Response

Response
+HTTPREAD: (list of supported <start_address>s),(list of supported<
byte_size>s)
OK
Parameters
See Write Command

Write Command Response

AT+HTTPREA +HTTPREAD: <date_len>
D=<start_addres <data>
s>,<byte_size>
OK
Read data when AT+HTTPACTION=0 or AT+HTTPDATA is executed.

SIM800 Series_AT Command Manual_V1.02

243

2013-10-23

Smart Machine Smart Decision

If<byte_size> is bigger than the data size received, module will only return
actual data size.
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<data>
<start_address>
<byte_size>
<data_len>
Execution
Command
AT+HTTPREA
D

Data from HTTP server or user input.

The starting point for data output.
0-319488 (bytes)
The length for data output.
1-319488 (bytes)
The actual length for data output.

Response
+HTTPREAD:<date_len>
<data>
OK
Read all data when AT+HTTPACTION=0 or AT+HTTPDATA is executed.
If error is related to ME functionality:
+CME ERROR: <err>

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note

11.2.7 AT+HTTPSCONT Save HTTP Application Context

AT+HTTPSCONT Save HTTP Application Context
Read Command
AT+HTTPSCON
T?

Response
TA returns HTTP Application Context, which consists of the following
AT Command parameters.
+HTTPSCONT:<mode>
CID:<value>
URL: <value>
UA: <value>
PROIP: <value>
PROPORT: <value>
REDIR: <value>
BREAK: <value>

SIM800 Series_AT Command Manual_V1.02

244

2013-10-23

Smart Machine Smart Decision

BREAKEND: <value>
OK
Parameters
<mode>

0 Saved, the value from NVRAM

1 Unsaved, the value from RAM

For other parameters, see the related command.

Execution
Command
AT+HTTPSCON
T

Response
TA saves HTTP Application Context which consists of following AT
Command parameters, and when system is rebooted, the parameters will
be loaded automatically.
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter

Parameter Saving
Mode
Max
Time

NO_SAVE

Response -

Reference

Note

11.2.8 AT+HTTPSTATUS
AT+HTTPSTATUS

Read HTTP Status

Read HTTP Status

Test Command
AT+HTTPSTAT
US=?

Response
OK

Read Command
AT+HTTPSTAT
US?

Response
+HTTPSTATUS: <mode>,<status>,<finish>,<remain>
OK
If error is related to ME functionality:
+CME ERROR: <err>

SIM800 Series_AT Command Manual_V1.02

245

2013-10-23

Smart Machine Smart Decision

Parameter:
<mode>
GET
POST
HEAD
<status>
0 idle
1 receiving
2 sending
<finish>
The amount of data which have been transmitted
<remain>
The amount of data remaining to be sent or received
Parameter Saving
Mode

NO_SAVE

Max
Time

Response

SIM800 Series_AT Command Manual_V1.02

246

2013-10-23

Smart Machine Smart Decision

12 AT Commands for FTP Application

SIM800 series has an embedded TCP/IP stack that is driven by AT commands and enables the
host application to easily access the Internet FTP service. This chapter is a reference guide to all
the AT commands and responses defined for using with the TCP/IP stack in FTP Service.

12.1 Overview

Command

Description

AT+FTPPORT

Set FTP control port

AT+FTPMODE

Set active or passive FTP mode

AT+FTPTYPE

Set the type of data to be transferred

AT+FTPPUTOPT

Set FTP put type

AT+FTPCID

Set FTP bearer profile identifier

AT+FTPREST

Set resume broken download

AT+FTPSERV

Set FTP server address

AT+FTPUN

Set FTP user name

AT+FTPPW

Set FTP password

AT+FTPGETNAME

Set download file name

AT+FTPGETPATH

Set download file path

AT+FTPPUTNAME

Set upload file name

AT+FTPPUTPATH

Set upload file path

AT+FTPGET

Download file

AT+FTPPUT

Set upload file

AT+FTPSCONT

Save FTP application context

AT+FTPDELE

Delete specified file in FTP server

AT+FTPSIZE

Get the size of specified file in FTP server

AT+FTPSTATE

Get the FTP state

AT+FTPEXTPUT

Extend upload file

AT+FTPMKD

Make directory on the remote machine

AT+FTPRMD

Remove directory on the remote machine

AT+FTPLIST

List contents of directory on the remote machine

12.2 Detailed Descriptions of Commands

12.2.1 AT+FTPPORT Set FTP Control Port
AT+FTPPORT Set FTP Control Port

SIM800 Series_AT Command Manual_V1.02

247

2013-10-23

Smart Machine Smart Decision

Test Command
AT+FTPPORT=
?

Response
OK

Read Command
AT+FTPPORT?

Response
+FTPPORT: <value>
OK
Parameter
See Write Command

Write Command
AT+FTPPORT=
<value>

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<value>

The value of FTP Control port, from 1 to 65535.

Default value is 21

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note
Numbers above 65535 are illegal as the port identification fields are 16 bits
long in the TCP header.

12.2.2 AT+FTPMODE
AT+FTPMODE

Set Active or Passive FTP Mode

Set Active or Passive FTP Mode

Test Command
Response
AT+FTPMOD=? OK
Read Command
Response
AT+FTPMODE? +FTPMODE: <value>
OK
Parameter
See Write Command
Write Command Response
AT+FTPMOD=< OK
If error is related to ME functionality:
value>
+CME ERROR: <err>

SIM800 Series_AT Command Manual_V1.02

248

2013-10-23

Smart Machine Smart Decision

Parameter
<value>

0 Active FTP mode

1 Passive FTP mode

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note

12.2.3 AT+FTPTYPE
AT+FTPTYPE

Set the Type of Data to Be Transferred

Set the Type of Data to Be Transferred

Test Command
AT+FTPTYPE=
?

Response
OK

Read Command
AT+FTPTYPE?

Response
+FTPTYPE: <value>
OK
Parameter
See Write Command

Write Command
AT+FTPTYPE=
<value>

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<value>

"A" For FTP ASCII sessions

"I" For FTP Binary sessions

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note
When this value is set to A, all the data sent by the stack to the FTP server is
made of 7 bits characters (NVT-ASCII: the MSB is set to 0). As a
consequence binary data containing 8 bits characters will be corrupted
during the transfer if the FTPTYPE is set to A.

12.2.4 AT+FTPPUTOPT Set FTP Put Type

AT+FTPPUTOPT Set FTP Put Type

SIM800 Series_AT Command Manual_V1.02

249

2013-10-23

Smart Machine Smart Decision

Test Command
Response
AT+FTPPUTOP OK
T =?
Read Command
Response
AT+FTPPUTOP +FTPPUTOPT: <value>
T?
OK
Parameter
See Write Command
Write Command Response
AT+FTPPUTOP OK
If error is related to ME functionality:
T =<value>
+CME ERROR: <err>
Parameter
<value>

"APPE" For appending file

"STOU" For storing unique file
"STOR" For storing file

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note

12.2.5 AT+FTPCID
AT+FTPCID

Set FTP Bearer Profile Identifier

Set FTP Bearer Profile Identifier

Test Command
AT+FTPCID=?

Response
OK
Parameter
See Write Command

Read Command
AT+FTPCID?

Response
+FTPCID: <value>
OK
Parameter
See Write Command

Write Command Response

AT+FTPCID=<v OK
If error is related to ME functionality:
alue>
+CME ERROR: <err>

SIM800 Series_AT Command Manual_V1.02

250

2013-10-23

Smart Machine Smart Decision

Parameter
<value>

Bearer profile identifier refer to AT+SAPBR

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note

12.2.6 AT+FTPREST Set Resume Broken Download

AT+FTPREST Set Resume Broken Download
Test Command
AT+FTPREST=
?

Response
OK

Read Command
AT+FTPREST?

Response
+FTPREST: <value>
OK
Parameter
See Write Command

Write Command
AT+FTPREST=
<value>

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<value>

Broken point to be resumed

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note

12.2.7 AT+FTPSERV Set FTP Server Address

AT+FTPSERV Set FTP Server Address
Test Command
AT+FTPSERV=
?

Response
OK

SIM800 Series_AT Command Manual_V1.02

251

2013-10-23

Smart Machine Smart Decision

Read Command
AT+FTPSERV?

Response
+FTPSERV: <value>
OK
Parameter
See Write Command

Write Command
AT+FTPSERV=
<value>

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<value>
32-bit number in dotted-decimal notation (i.e.
xxx.xxx.xxx.xxx) or alphanumeric ASCII text string up to 49
characters if DNS is available

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note

12.2.8 AT+FTPUN
AT+FTPUN

Set FTP User Name

Set FTP User Name

Test Command
AT+FTPUN=?

Response
OK
Parameter
See Write Command

Read Command
AT+FTPUN?

Response
+FTPUN: <value>
OK
Parameter
See Write Command

Write Command Response

AT+FTPUN=<va OK
lue>
If error is related to ME functionality:
+CME ERROR: <err>

SIM800 Series_AT Command Manual_V1.02

252

2013-10-23

Smart Machine Smart Decision

Parameter
<value>

Alphanumeric ASCII text string up to 49 characters.

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note

12.2.9 AT+FTPPW Set FTP Password

AT+FTPPW Set FTP Password
Test Command
AT+FTPPW=?

Response
OK
Parameter
See Write Command

Read Command
AT+FTPPW?

Response
+FTPPW: <value>
OK
Parameter
See Write Command

Write Command
AT+FTPPW=<v
alue>

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<value>

Alphanumeric ASCII text string up to 49 characters.

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note

12.2.10 AT+FTPGETNAME
AT+FTPGETNAME

Set Download File Name

Set Download File Name

SIM800 Series_AT Command Manual_V1.02

253

2013-10-23

Smart Machine Smart Decision

Test Command
Response
AT+FTPGETNA OK
ME=?
Read Command
Response
AT+FTPGETNA +FTPGETNAME: <value>
ME?
OK
Parameter
See Write Command
Write Command Response
AT+FTPGETNA OK
If error is related to ME functionality:
ME =<value>
+CME ERROR: <err>
Parameter
<value>

Alphanumeric ASCII text string up to 99 characters

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note

12.2.11 AT+FTPGETPATH
AT+FTPGETPATH

Set Download File Path

Set Download File Path

Test Command
Response
AT+FTPGETPA OK
TH=?
Read Command
Response
AT+FTPGETPA +FTPGETPATH: <value>
TH?
OK
Parameter
See Write Command
Write Command Response
AT+FTPGETPA OK
If error is related to ME functionality:
TH=<value>
+CME ERROR: <err>

SIM800 Series_AT Command Manual_V1.02

254

2013-10-23

Smart Machine Smart Decision

Parameter
<value>

Alphanumeric ASCII text string up to 255 characters

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note

12.2.12 AT+FTPPUTNAME
AT+FTPPUTNAME

Set Upload File Name

Set Upload File Name

Test Command
Response
AT+FTPPUTNA OK
ME=?
Read Command
Response
AT+FTPPUTNA +FTPPUTNAME: <value>
ME?
OK
Parameter
See Write Command
Write Command Response
AT+FTPPUTNA OK
If error is related to ME functionality:
ME=<value>
+CME ERROR: <err>
Parameter
<value>

Alphanumeric ASCII text string up to 99 characters

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note

12.2.13 AT+FTPPUTPATH
AT+FTPPUTPATH
Test Command
AT+FTPPUTPA
TH=?

Set Upload File Path

Set Upload File Path

Response
OK

SIM800 Series_AT Command Manual_V1.02

255

2013-10-23

Smart Machine Smart Decision

Read Command
AT+FTPPUTPA
TH?

Response
+FTPPUTPATH: <value>
OK
Parameter
See Write Command

Write Command
AT+FTPPUTPA
TH=<value>

Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<value>

Alphanumeric ASCII text string up to 255 characters

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note

12.2.14 AT+FTPGET Download File

AT+FTPGET Download File
Test Command
AT+FTPGET=?

Response
OK

Write Command
AT+FTPGET=<
mode>[,<reqleng
th>]

Response
If mode is 1 and it is a successful FTP get session:
OK
+FTPGET:1,1
If data transfer finished:
+FTPGET:1,0
If mode is 1 and it is a failed FTP get session:
OK
+FTPGET:1,<error>
If mode is 2:
+FTPGET:2,<cnflength>
012345678
OK
If error is related to ME functionality:

SIM800 Series_AT Command Manual_V1.02

256

2013-10-23

Smart Machine Smart Decision

+CME ERROR: <err>

Parameters
<mode> 1 For opening FTP get session
2 For reading FTP download data.
<reqlength> Requested number of data bytes (1-1460)to be read
<cnflength> Confirmed number of data bytes to be read, which may be less
than <length>. 0 indicates that no data can be read.
<error>
61 Net error
62 DNS error
63 Connect error
64 Timeout
65 Server error
66 Operation not allow
70 Replay error
71 User error
72 Password error
73 Type error
74 Rest error
75 Passive error
76 Active error
77 Operate error
78 Upload error
79 Download error
Parameter Saving NO_SAVE
Mode
Max
Time

Response 60 seconds(In case no response is received from server)

Reference

Note
When "+FTPGET:1,1" is shown, then use AT+FTPGET:2,<reqlength> to
read data. If the module still has unread data, "+FTPGET:1,1" will be
shown again in a certain time.

12.2.15 AT+FTPPUT Set Upload File

AT+FTPPUT Set Upload File
Test Command
AT+FTPPUT=?

Response
OK

Write Command
AT+FTPPUT=<
mode>[,<reqleng
th>]

Response
If mode is 1 and it is a successful FTP get session:
OK
+FTPPUT:1,1,<maxlength>

SIM800 Series_AT Command Manual_V1.02

257

2013-10-23

Smart Machine Smart Decision

If mode is 1 and it is a failed FTP get session:

OK
+FTPPUT:1,<error>
If mode is 2 and <reqlength> is not 0
+FTPPUT:2,<cnflength>

//Input data
OK
If mode is 2 and <reqlength> is 0, it will respond OK, and FTP session will
be closed
OK
If data transfer finished.
+FTPPUT:1,0
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<mode>

1 For opening FTP put session

2 For writing FTP upload data.
Requested number of data bytes(0-<maxlength>) to be

<reqlength>
transmitted
<cnflength>
Confirmed number of data bytes to be transmitted
<maxlength> The max. length of data can be sent at a time. It depends on
the network status.
<error>
See "AT+FTPGET"
Parameter Saving NO_SAVE
Mode
Max
Time

Response 60 seconds(In case no response is received from server)

Reference

Note
When "+FTPPUT:1,1,<maxlength>" is shown, then use "AT+FTPPUT=2,
<reqlength>" to write data.

12.2.16 AT+FTPSCONT Save FTP Application Context

AT+FTPSCONT Save FTP Application Context
Read Command
AT+FTPSCONT
?

Response
TA returns FTP Application Context, which consists of the following AT
Command parameters.
+FTPSCONT:<mode>
+FTPSERV: <value>
+FTPPORT: <value>

SIM800 Series_AT Command Manual_V1.02

258

2013-10-23

Smart Machine Smart Decision

+FTPUN: <value>
+FTPPW: <value>
+FTPCID: <value>
+FTPMODE: <value>
+FTPTYPE: <value>
+FTPPUTOPT: <value>
+FTPREST: <value>
+FTPGETNAME: <value>
+FTPGETPATH: <value>
+FTPPUTNAME: <value>
+FTPPUTPATH: <value>
+FTPTIMEOUT: <value>

OK
Parameter
<mode>

0 Saved, the value from NVRAM

1 Unsaved, the value from RAM
For other parameters, see the related command.
Execution
Command
AT+FTPSCONT

Response
TA saves FTP Application Context which consist of following AT
Command parameters, and when system is rebooted, the parameters will
be loaded automatically.
OK

Parameter Saving
Mode

NO_SAVE

Max
Time

Response

Reference

Note

12.2.17 AT+FTPDELE
AT+FTPDELE

Delete Specified File in FTP Server

Delete Specified File in FTP Server

Test Command
AT+FTPDELE=?

Response
OK
Parameter

Execution
Command
AT+FTPDELE

Response
If successed:
OK
+FTPDELE:1,0

SIM800 Series_AT Command Manual_V1.02

259

2013-10-23

Smart Machine Smart Decision

If failed:
OK
+FTPDELE:1,<error>
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<error>
Parameter
Mode
Max
Time

See "AT+FTPGET"

Saving NO_SAVE
Response 60 seconds(In case no response is received from server)

Reference

Note
The file to be deleted is specified by the "AT+FTPGETNAME" and
"AT+FTPGETPATH" commands.

12.2.18 AT+FTPSIZE
AT+FTPSIZE
Test Command
AT+FTSIZE=?

Get the Size of Specified File in FTP Server

Get the Size of Specified File in FTP Server

Response
OK
Parameter

Execution
Command
AT+FTPSIZE

Response
If successed:
OK
+FTPSIZE:1,0,<size>
If failed:
OK
+FTPSIZE:1,<error>,<0>
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<error>
<size>

Parameter
Mode
Max
Time

See "AT+FTPGET"
The file size. Unit: byte

Saving NO_SAVE
Response 60 seconds(In case no response is received from server)

SIM800 Series_AT Command Manual_V1.02

260

2013-10-23

Smart Machine Smart Decision

Reference

Note
The file is specified by
"AT+FTPGETPATH" commands.

12.2.19 AT+FTPSTATE
AT+FTPSTATE

the

"AT+FTPGETNAME"

and

Get the FTP State

Get the FTP State

Test Command
Response
AT+FTPSTATE=? OK
Parameter

Execution
Command
AT+FTPSTATE

Response
+FTPSTATE:<state>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<state>
0 idle
1 in the FTP session, including FTPGET, FTPPUT, FTPDELE and
FTPSIZE operation.

Parameter
Mode
Max
Time

Saving NO_SAVE
Response -

Reference

Note

12.2.20 AT+FTPEXTPUT Extend Upload File

AT+FTPEXTPUT Extend Upload File
Test Command
Response
AT+FTPEXTPUT OK
=?
Write Command
AT+FTPEXTPUT
=<mode>[,<pos>,<
len>,<timeout>]

Response
If mode is 0 or 1
OK
If mode is 2
+FTPEXTPUT: <address>,<len>
If error is related to ME functionality:
+CME ERROR: <err>

SIM800 Series_AT Command Manual_V1.02

261

2013-10-23

Smart Machine Smart Decision

Parameter
<mode>
0 use default FTPPUT method
1 use extend FTPPUT method
2 download data which neet to PUT to RAM
<pos> data offset address 0-300k
<len> data length 0-300k
<timeout> timeout value of serial port 1000ms-1000000ms
Parameter
Mode
Max
Time

Saving NO_SAVE
Response 60 seconds(In case no response is received from server)

Reference

Note
When extend FTPPUT mode is activated, input data then execute
AT+FTPPUT=1 to transmit, after session is complete, if successful, it
returns +FTPPUT: 1,0, otherwise it returns +FTPPUT: 1,<error>,
<error> see AT+FTPGET.

12.2.21 AT+FTPMKD
AT+FTPMKD

Make Directory on the Remote Machine

Make Directory on the Remote Machine

Test Command
AT+FTPMKD=?

Response
OK

Execution
Command
AT+FTPMKD

Response
If success:
OK
+FTPMKD: 1,0
If failed:
OK
+FTPMKD: 1,<error>
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<error>

Parameter
Mode
Max
Time
Reference

See AT+FTPGET

Saving NO_SAVE
Response 60 seconds(In case no response is received from server)
Note
The created folder is specified by the AT+FTPGETPATH command.

SIM800 Series_AT Command Manual_V1.02

262

2013-10-23

Smart Machine Smart Decision

12.2.22 AT+FTPRMD
AT+FTPRMD

Remove Directory on the Remote Machine

Remove Directory on the Remote Machine

Test Command
AT+FTPRMD=?

Response
OK

Execution
Command
AT+FTPRMD

Response
If success:
OK
+FTPRMD: 1,0
If failed:
OK
+FTPRMD: 1,<error>
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<error>

Parameter
Mode
Max
Time

See AT+FTPGET

Saving NO_SAVE
Response 60 seconds(In case no response is received from server)

Reference

Note
The removed folder is specified by the AT+FTPGETPATH command.

12.2.23 AT+FTPLIST List Contents of Directory on the Remote Machine

AT+FTPLIST List Contents of Directory on the Remote Machine
Test Command
AT+FTPLIST=?

Response
OK

Write Command
AT+FTPLIST=<m
ode>[,<reqlength>
]

Response
If mode is 1 and it is a successful FTP get session:
OK
+FTPLIST: 1,1
If data transfer is finished:
+FTPLIST: 1,0
If mode is 1 and it is a failed FTP get session:
OK
+FTPLIST: 1,<error>

SIM800 Series_AT Command Manual_V1.02

263

2013-10-23

Smart Machine Smart Decision

If mode is 2:
+FTPLIST: 2,<cnflength>
012345678
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<mode>
1 For opening FTP get file list session
2 For reading FTP file list
<reqlength> Requested number of data bytes (1-1460) to be read
<cnflength> Confirmed number of data bytes to be read, which may be
less than <reqlength>. 0 indicates that no data can be read.
<error> See AT+FTPGET
Parameter
Mode
Max
Time
Reference

Saving NO_SAVE
Response 60 seconds(In case no response is received from server)
Note
When +FTPLIST: 1,1 is shown, AT+FTPLIST: 2,<reqlength> can be
used to read data. If the module still has unread data, +FTPLIST: 1,1
will be shown again in a certain time.

SIM800 Series_AT Command Manual_V1.02

264

2013-10-23

Smart Machine Smart Decision

13 AT Commands for GSM Location Application

SIM800 series support GSM location operation.

13.1 Overview
Command

Description

AT+CIPGSMLOC

GSM location and time

13.2 Detailed Descriptions of Commands

13.2.1 AT+CIPGSMLOC GSM Location and Time

AT+CIPGSMLOC

GSM Location and Time

Test Command
Response
AT+CIPGSMLOC= +CIPGSMLOC: (1,2),(1-3)
?
OK
Parameter
See Write Command
Write Command
Response
AT+CIPGSMLOC= If <type>=1:
<type>,<cid>
+CIPGSMLOC:<locationcode>[,<longitude>,<latitude>,<date>,<ti
me>]
OK
If <type>=2:
+CIPGSMLOC:<locationcode>[,<date>,<time>]
OK
If error is related to ME functionality:
+CME ERROR:<err>
Parameter
<type>
<cid>

1 View the longitude, latitude and time

2 View time
network parameters, refer to AT+SAPBR

<locationcode> 0
Success
If the operation failed, the location code is not 0, such as:
404 Not Found

SIM800 Series_AT Command Manual_V1.02

265

2013-10-23

Smart Machine Smart Decision

<longitude>
<latitude>
<date>
<time>
Parameter
Mode

408 Request Time-out

601 Network Error
602 No memory
603 DNS Error
604 Stack Busy
65535 Other Error
Current longitude in degrees
Current latitude in degrees
Format is YYYY/MM/DD, the time zone is GMT E.g.
2011/01/26
Format is hh/mm/ss,the time zone is GMT.E.g. 06:10:46

Saving NO_SAVE

Max Response Time

Reference

Note

SIM800 Series_AT Command Manual_V1.02

266

2013-10-23

Smart Machine Smart Decision

14 AT Commands for Email Application

1.

2.
3.
4.

SIM800 series supports to send an Email with an attachment via SMTP protocol. It
also supports carbon copy (abbreviated Cc:) recipient and blind carbon copy
(abbreviated Bcc:) recipient.
SIM800 series supports to retrieve and delete the Email via POP3 protocol, the Email
may be with attachments.
SIM800 series supports all of POP3 commands but APOP. By these POP3 commands,
you can get the specific Emails size and unique-id.
SIM800 series does not support that SMTP and POP3 operations are executed at the
same time.

14.1 Overview
Command

Description

AT+EMAILCID

Set Email bearer profile identifier

AT+EMAILTO

Set timeout value of SMTP/POP3 server response

AT+SMTPSRV

Set SMTP server address and port

AT+SMTPAUTH

Set user name and password for SMTP authentication

AT+SMTPFROM

Set sender address and name

AT+SMTPRCPT

Set the Email recipient(to/cc/bcc) address and name

AT+SMTPSUB

Set the Email subject

AT+SMTPBODY

Set the Email body

AT+SMTPFILE

Set the Email attachment

AT+SMTPSEND

Send the Email

AT+SMTPFT

Transfer the Email attachment

AT+SMTPCS

Set the Email charset

AT+POP3SRV

Set POP3 server and account

AT+POP3IN

Log in POP3 server

AT+POP3NUM

Get Email number and total size

AT+POP3LIST

Get the specific Email size

AT+POP3UIDL

Get the specific Email unique-id

AT+POP3CMD

Get multi-line response

AT+POP3READ

Read multi-line response

AT+POP3DEL

Mark the specific Email to delete

AT+POP3RSET

Unmark the emails that be marked as deleted

AT+POP3OUT

Log out POP3 server

SIM800 Series_AT Command Manual_V1.02

267

2013-10-23

Smart Machine Smart Decision

14.2 Detailed Descriptions of Commands

14.2.1 AT+EMAILCID

AT+EMAILCID

Set Email Bearer Profile Identifier

Set Email Bearer Profile Identifier

Test Command
AT+EMAILCID=?

Response
+EMAILCID: (range of supported <cid>s)
OK
Parameters
See Write Command

Read Command
AT+EMAILCID?

Response
+EMAILCID: <cid>
OK
Parameters
See Write Command

Write Command
Response
AT+EMAILCID=<c
id>
OK
If error is related to ME functionality:
ERROR
Parameters
<cid>
bearer profile identifier refer to AT+SAPBR
Parameter
Mode

Saving NO_SAVE

Max Response Time

Reference

Note

14.2.2 AT+EMAILTO

AT+EMAILTO
Test Command
AT+EMAILTO=?

Set Timeout Value of SMTP/POP3 Server Response

Set Timeout Value of SMTP/POP3 Server Response

Response
+EMAILTO: (range of supported <timeout>s)
OK
Parameter
See Write Command

SIM800 Series_AT Command Manual_V1.02

268

2013-10-23

Smart Machine Smart Decision

Read Command
AT+EMAILTO?

Response
+EMAILTO: <timeout>
OK
Parameter
See Write Command

Write Command
AT+EMAILTO=<ti
meout>

Response
OK
If error is related to ME functionality:
ERROR
Parameter
<timeout> The timeout value of SMTP/POP3 server response, in 1
second unit.
10-120 Default: 30(seconds)

Parameter
Mode

Saving NO_SAVE

Max Response Time

Reference

Note

14.2.3 AT+SMTPSRV

AT+SMTPSRV
Test Command
AT+SMTPSRV=?

Set SMTP Server Address and Port

Set SMTP Server Address and Port

Response
+SMTPSRV: <smtpServerLength>,(range of supported <smtpPort>s)
OK
Parameter
See Write Command

Read Command
AT+SMTPSRV?

Response
+SMTPSRV: <smtpServer>,<smtpPort>
OK
Parameter
See Write Command

Write Command
AT+SMTPSRV=
<smtpServer>[,<sm
tpPort>]

Response
OK
If error is related to ME functionality:
ERROR

SIM800 Series_AT Command Manual_V1.02

269

2013-10-23

Smart Machine Smart Decision

Parameter
<smtpServer>

SMTP server address, string type. This parameter

can be either:
- IP address in the format: xxx.xxx.xxx.xxx
- Host name to be solved with a DNS query
<smtpPort> The SMTP port
1-65535
Default: 25
<smtpServerLength> The max length of <smtpServer>
Parameter
Mode

Saving NO_SAVE

Max Response Time

Reference

Note

14.2.4 AT+SMTPAUTH

AT+SMTPAUTH

Set User Name and Password for SMTP Authentication

Set User Name and Password for SMTP Authentication

Test Command
Response
AT+SMTPAUTH=? +SMTPAUTH: (range of supported<authType>s),<userNameLength>,<passwordLength>
OK
Parameter
See Write Command
Read Command
AT+SMTPAUTH?

Response
+SMTPAUTH: <authType>,<username>,<password>
OK
Parameter
See Write Command

Write Command
AT+SMTPAUTH=<
authType>[,<userNa
me>,<password>]

Response
OK
If error is related to ME functionality:
ERROR
Parameter
<authType>
0

The type of SMTP authentication

SMTP server does not request authentication.
<username> and <password> must not be given.
1
SMTP server requests authentication
<userName> The user name for SMTP authentication.

SIM800 Series_AT Command Manual_V1.02

270

2013-10-23

Smart Machine Smart Decision

<userNameLength> The max length of <userName>.

<password>
The password for SMTP authentication.
<passwordLength>
The max length of <password>.
Parameter
Mode

Saving NO_SAVE

Max Response Time

Reference

Note

14.2.5 AT+SMTPFROM

Set Sender Address and Name

AT+SMTPFROM

Set Sender Address and Name

Test Command
AT+SMTPFROM=
?

Response
+SMTPFROM: <senderAddressLength>,<senderNameLength>
OK
Parameter
See Write Command

Read Command
AT+SMTPFROM?

Response
+SMTPFROM: <senderAddress>,<senderName>
OK
Parameter
See Write Command

Write Command
AT+SMTPFROM=
<senderAddress>[,<s
enderName>]

Response
OK
If error is related to ME functionality:
ERROR
Parameter
<senderAddress>
<senderAddressLength>
<senderName>
<senderNameLength>

Parameter
Mode

The Email sender address,string type.

The max length of <senderAddress>
The Email sender name,string type.
The max length of <senderName>

Saving NO_SAVE

Max Response Time

Reference

Note

SIM800 Series_AT Command Manual_V1.02

271

2013-10-23

Smart Machine Smart Decision

14.2.6 AT+SMTPRCPT

AT+SMTPRCPT

Set the Email Recipient(TO/CC/BCC) Address and Name

Set the Email Recipient(TO/CC/BCC) Address and Name

Test Command
Response
AT+SMTPRCPT=? +SMTPRCPT: (range of supported <rcptType>s),(range of supported
<index>s),<rcptAddressLength>,<rcptNameLength>
OK
Parameter
See Write Command
Read Command
AT+SMTPRCPT?

Response
[+SMTPRCPT: <rcptType>,<index>,<rcptAddress>,<rcptName>
[<CR><LF>+SMTPRCPT: <rcptType>,<index>,<rcptAddress>,
<rcptName>[]]]
OK
Parameter
See Write Command

Write Command
AT+SMTPRCPT=<
rcptType>[,<index>
[,<rcptAddress>[,<r
cptName>]]]

Response
OK
If error is related to ME functionality:
ERROR
Parameter
<rcptType>

The type of recipient, the types of TO and CC are used to

construct e-mail header in the field:To: or Cc:.
0
TO, Normal Recipient.
1
CC, Carbon Copy recipient.
2
BCC, Blind Carbon Copy recipient.
<index> Index of the type of recipient, decimal format
<rcptAddress> The Email recipient address.
<rcptName> The Email recipient name.
<rcptAddressLength> The max length of <rcptAddress>.
<rcptNameLength> The max length of <rcptName>.

Parameter
Mode

Saving NO_SAVE

Max Response Time

Reference

Note
z If only <rcptType> is given,it will delete all items of <rcptType>
z If only <rcptType> and <index> are given,it will delete the <index>
item of <rcptType>.

SIM800 Series_AT Command Manual_V1.02

272

2013-10-23

Smart Machine Smart Decision

14.2.7 AT+SMTPSUB
AT+SMTPSUB
Test Command
AT+SMTPSUB=?

Set the Email Subject

Set the Email Subject
Response
+SMTPSUB: <subjectLength>
OK
Parameter
See Write Command

Read Command
AT+SMTPSUB?

Response
+SMTPSUB: <subject>
OK
Parameter
See Write Command

Write Command
Response
AT+SMTPSUB=<su OK
If error is related to ME functionality:
bject>
ERROR
Parameter
<subject>

The Email subject, string type. It will be present in the

header of the Email sent by SMTP client in the field:
Subject:.
<subjectLength> The max length of <subject>.
Parameter
Mode

Saving NO_SAVE

Max Response Time

Reference

Note
If the Email charset is not ASCII,<subject> must be in hexadecimal
format.

14.2.8 AT+SMTPBODY
AT+SMTPBODY

Set the Email Body

Set the Email Body

Test Command
Response
AT+SMTPBODY=? +SMTPBODY: <bodyLength>
OK
Parameter
See Write Command

SIM800 Series_AT Command Manual_V1.02

273

2013-10-23

Smart Machine Smart Decision

Write Command
AT+SMTPBODY=<
length>
,then type data as
Email body. When
bodys length equal
length, command is
over!
Parameter
Mode

Response
DOWNLOAD
OK
If error is related to ME functionality:
ERROR
Parameter
<length>

The length of Email body.

Saving NO_SAVE

Max Response Time

Reference

Note
z If the Email charset is not ASCII, the body of Email must be in
hexadecimal format.
z After urc string DOWNLOAD, User can input emails body!

14.2.9 AT+SMTPFILE

Set the Email Attachment

AT+SMTPFILE

Set the Email Attachment

Test Command
AT+SMTPFILE=?

Response
+SMTPFILE: (range of <fileType>s),<fileNameLength>,(range of
<encodeType>s)
OK
Parameter
See Write Command

Read Command
AT+SMTPFILE?

Response
+SMTPFILE: <fileType>,<fileName>,<encodeType>
OK
Parameter
See Write Command

Write Command
AT+SMTPFILE=<fi
leType>[,<fileName>
,<encodeType>]

Response
OK
If error is related to ME functionality:
ERROR
Parameter
<fileType>
The type of the Email attachment.
0 no attachment
1
attach a txt file

SIM800 Series_AT Command Manual_V1.02

274

2013-10-23

Smart Machine Smart Decision

2
attach a binary file (bmp, mp3, video)
<fileName>
The name of the Email attachment.
<fileNameLength> The max length of <fileName>.
<encodeType> Content-Transfer-Encoding used for attachment
0 7bit means data all represented as short
lines of US-ASCII data
1 base64 designed to represent arbitrary
sequences of octets in a form that need
not be humanly readable
Parameter
Mode

Saving NO_SAVE

Max Response Time

Reference

Note
z If a txt file (<fileType>=1) is attached, <encodeType> must be 0.
z If a binary file (<fileType>=2) is attached, <encodeType> must be
1.

14.2.10 AT+SMTPSEND

Send the Email

AT+SMTPSEND

Send the Email

Test Command
AT+SMTPSEND=?

Response
OK
Parameter

Execution Command Response

AT+SMTPSEND
OK
If error is related to ME functionality:
ERROR
If send successfully or not, return:
+SMTPSEND: <code>
Parameter
<code>
61
62
63
64
65
66
67

The result of sending Email.

1
The Email has been sent successfully.
Network error.
DNS resolve error
SMTP TCP connection error.
Timeout of SMTP server response
SMTP server response error
Not authentication
Authentication failed. SMTP user name or password may
be not right.

SIM800 Series_AT Command Manual_V1.02

275

2013-10-23

Smart Machine Smart Decision

68
Parameter
Mode

Bad recipient.

Saving NO_SAVE

Max Response Time

Reference

Note

14.2.11 AT+SMTPFT

Transfer the Email Attachment

AT+SMTPFT

Transfer the Email Attachment

Test Command
AT+SMTPFT=?

Response
OK
Parameter
See Write Command

Write Command
Response
AT+SMTPFT=<req When the URC below is reported, the attachment can be transferred:
Length>
+SMTPFT: 1,<maxLength>
If <reqLength> is not 0 and send data successfully:
+SMTPFT: 2,<cnfLength>
......
//Input data
OK
If <reqLength> is not 0 and send data unsuccessfully:
+SMTPFT: 2,<cnfLength>
......
//Input data
ERROR
If <reqLength> is 0,it indicates that transferring the attachment have
finished:
OK
If error is related to ME functionality:
ERROR
If some error occur:
+SMTPSEND: <code>
Parameter
<reqLength>
<cnfLength>

SIM800 Series_AT Command Manual_V1.02

Requested number of data bytes(0-<maxLength>) to

be transmitted
Confirmed number of data bytes to be transmitted

276

2013-10-23

Smart Machine Smart Decision

<maxLength>
<code>
Parameter
Mode

The max length of data can be sent at a time. It depends

on the network status.
See AT+SMTPSEND

Saving NO_SAVE

Max Response Time

Reference

Note
z <reqLength> can not be greater than <maxLength>.
z When +SMTPFT: 1,<maxLength> is reported, then use
AT+SMTPFT=<reqLength> to send data.

14.2.12 AT+SMTPCS

AT+SMTPCS

Set the Email Charset

Set the Email Charset

Test Command
AT+SMTPCS=?

Response
+SMTPCS: <charsetLength>
OK
Parameter
See Write Command

Read Command
AT+SMTPCS?

Response
+SMTPCS: <charset>
OK
Parameter
See Write Command

Write Command
Response
AT+SMTPCS=<cha OK
If error is related to ME functionality:
rset>
ERROR
Parameter
<charset> The Email charset, string type. It shows which charset
the subject and the body are encoded in. If <charset> is not
ASCII but UTF-8 or other, the subject and the body must be
in hexadecimal format (e.g. TEST should be converted to
54455354).
The default charset is ASCII.
<charsetLength> The max length of <charset>.
Parameter
Mode

Saving NO_SAVE

SIM800 Series_AT Command Manual_V1.02

277

2013-10-23

Smart Machine Smart Decision

Max Response Time

Reference

Note

14.2.13 AT+POP3SRV
AT+POP3SRV
Test Command
AT+POP3SRV=?

Set POP3 Server and Account

Set POP3 Server and Account

Response
+POP3SRV: <pop3ServerLength>,<userNameLength>,<passwordLength>,(range of supported <pop3Port>s)
OK
Parameter
See Write Command

Read Command
AT+POP3SRV?

Response
+POP3SRV: <pop3Server>,<userName>,<password>,<pop3Port>
OK
Parameter
See Write Command

Write Command
AT+POP3SRV=<po
p3Server>,<userNa
me>,<password>[,<p
op3Port>]

Response
OK
If error is related to ME functionality:
ERROR
Parameter
<pop3Server>

POP3 server address, string type. This parameter can

be either:
- IP address in the format: xxx.xxx.xxx.xxx
- Host name to be solved with a DNS query
<userName>
The user name to log in POP3 server, string type.
<password>
The password to log in POP3 server, string type.
<pop3Port>
The port of POP3 server.
1-65535
Default: 110
<pop3ServerLength> The max length of <pop3Server>.
<userNameLength>
The max length of <userName>.
<passwordLength>
The max length of <password>.
Parameter
Mode

Saving NO_SAVE

Max Response Time

Reference

Note

SIM800 Series_AT Command Manual_V1.02

278

2013-10-23

Smart Machine Smart Decision

14.2.14 AT+POP3IN

AT+POP3IN

Log in POP3 Server

Log in POP3 Server

Test Command
AT+POP3IN=?

Response
OK
Parameter

Execution Command Response

AT+POP3IN
OK
If error is related to ME functionality:
ERROR
If logging in POP3 server or not, return:
+POP3IN: <code>
Parameter
<code>
1
61
62
63
64
65
66
67
68
Parameter
Mode

The result of logging in POP3 server

Log in POP3 server successfully
Network error
DNS resolve error
POP3 tcp connection error
Timeout of POP3 server response
POP3 server response error
POP3 server rejects to log in
Incorrect user name
Incorrect user name or password

Saving NO_SAVE

Max Response Time

Reference

Note

14.2.15 AT+POP3NUM

Get Email Number and Total Size

AT+POP3NUM

Get Email Number and Total Size

Test Command
AT+POP3NUM=?

Response
OK
Parameter

SIM800 Series_AT Command Manual_V1.02

279

2013-10-23

Smart Machine Smart Decision

Execution Command Response

AT+POP3NUM
OK
If error is related to ME functionality:
ERROR
If POP3 server issues a positive response:
+POP3NUM: 1,<totalNumber>,<totalSize>
If POP3 server issues a negative response:
+POP3NUM: 0
If some error occur:
+POP3OUT: <code>
Parameter
<totalNumber>

The Email number on the POP3 server, decimal

format.
<totalSize>
The total size of all Email and the unit is in byte.
<code>
The result of logging out POP3 server
1
Normally log out POP3 server
61
Network error
62
DNS resolve error
63
POP3 tcp connection error
64
Timeout of POP3 server response
Parameter
Mode

Saving NO_SAVE

Max Response Time

Reference

Note

14.2.16 AT+POP3LIST

Get the Specific Email Size

AT+POP3LIST

Get the Specific Email Size

Test Command
AT+POP3LIST=?

Response
+POP3LIST: (range of supported <msgNumber>s)
OK
Parameter
See Write Command

Write Command
Response
AT+POP3LIST=<m OK
If error is related to ME functionality:
sgNumber>
ERROR
If POP3 server issues a positive response:
+POP3LIST: 1,<msgNumber>,<size>
If POP3 server issues a negative response:
+POP3LIST: 0

SIM800 Series_AT Command Manual_V1.02

280

2013-10-23

Smart Machine Smart Decision

If some error occur:

+POP3OUT: <code>
Parameter
<msgNumber> The message number of Email.
<size>
The size of Email <msgNumber> and the unit is in byte.
<code>
The result of logging out POP3 server
1
Normally log out POP3 server
61
Network error
62
DNS resolve error
63 POP3 tcp connection error
64 Timeout of POP3 server response
Parameter
Mode

Saving NO_SAVE

Max Response Time

Reference

Note

14.2.17 AT+POP3UIDL

Get the Specific Email Unique-id

AT+POP3UIDL

Get the Specific Email Unique-id

Test Command
AT+POP3UIDL=?

Response
+POP3UIDL: (range of supported <msgNumber>s)
OK
Parameter
See Write Command

Write Command
AT+POP3UIDL=<
msgNumber>

Response
OK
If error is related to ME functionality:
ERROR
If POP3 server issues a positive response:
+POP3UIDL: 1,<msgNumber>,<uid>
If POP3 server issues a negative response:
+POP3UIDL: 0
If some error occur:
+POP3OUT: <code>
Parameter
<msgNumber > The message number of Email .
<UID>
The Email unique-id, the unique-id is an arbitrary

SIM800 Series_AT Command Manual_V1.02

281

2013-10-23

Smart Machine Smart Decision

<code>
1
61
62
63
64
Parameter
Mode

server-determined string, consisting of 1 to 70 characters in

the range 0x21 to 0x7E,which uniquely identifies a message
within a maildrop and which persists across sessions.
The result of logging out POP3 server
Normally log out POP3 server
Network error
DNS resolve error
POP3 tcp connection error
Timeout of POP3 server response

Saving NO_SAVE

Max Response Time

Reference

Note

14.2.18 AT+POP3CMD

Get Multi-line Response

AT+POP3CMD

Get Multi-line Response

Test Command
AT+POP3CMD=?

Response
+POP3CMD: (range of supported <cmdType>s),(range of supporte
d<msgNumber>s),(range of supported <lineNumber>s)
OK
Parameter
See Write Command

Write Command
AT+POP3CMD=<c
mdType>[,<msgNum
ber>[,lineNumber]]

Response
OK
If error is related to ME functionality:
ERROR
If POP3 server issues a positive response:
+POP3CMD: 1
If POP3 server issues a negative response:
+POP3CMD: 0
If some error occur:
+POP3OUT: <code>
Parameter
<cmdType>
The values that supported POP3 user command
1
List command
The List command returns a multi-line scan listing. For
each message on the maildrop list of the server the POP3
service returns a line containing the message number and its
size in bytes. A final dotline will be printed at the end of the
scan listing. If there are no messages on the maildrop list of
the server, the POP3 service returns a positive response, i.e. It

SIM800 Series_AT Command Manual_V1.02

282

2013-10-23

Smart Machine Smart Decision

does not issue an error response, but the scan listing will be
empty. In either case,each scan listing will be finished by
so-called dotline, i.e. a new line with just a single dot.
<msgNumber> and <lineNumber> must not be given.
2
Uidl command
The Uidl command returns a multi-line unique-id
Listing. For each message on the maildrop list of the
Server the POP3 service returns a line containing the
message number and its unique-id. A final dotline
will be printed at the end of the unique-id listing If
there are no messages on the maildrop list of the server. The
POP3
service
returns
a
positive
response,
i.e. It does not issue an error response, but the uniqueid listing will be empty. In either case, each unique-id
listing will be finished by so-called dotline, i.e.a new
line with just a singledot. <msgNumber> and <lineNumber>
must not be given.
3
Top command
The command retrieves the number of lines of the messages
body from the POP3 servers maildrop list. The POP3 server
sends the headers of the message, the blank line separating
the headers from the body, and then the number of lines of the
messages body. If the number of lines requested by The
POP3 client is greater than the number of lines
in the body, then the POP3 server sends the entire
message. If no such message exists on the server the POP3
service issues an error response to the user.
Each email will be finished by a so-called dotline,
i.e.a
new
line
with
just
a
single
dot.
<msgNumber> and <lineNumber> must be given.
4
Retrieve command
The command retrieves the related message from the
POP3 servers maildrop list. If no such message exists
on the server the POP3 service issues an error response to the
user. Each email will be finished by a so-called dotline, i.e.
a
new
line
with
just
a
single
dot.
<msgNumber> must be given.
<msgNumber>
The message number of Email.
<lineNumber> The number of lines of the message body.
<code>
The result of logging out POP3 server
1
Normally log out POP3 server
61
Network error
62
DNS resolve error
63 POP3 tcp connection error

SIM800 Series_AT Command Manual_V1.02

283

2013-10-23

Smart Machine Smart Decision

64
Parameter
Mode

Timeout of POP3 server response

Saving NO_SAVE

Max Response Time

Reference

Note
After sending these POP3 commands and POP3 server issuing a positive
response, you can get the response by AT+POP3READ.

14.2.19 AT+POP3READ

Read Multi-line Response

AT+POP3READ

Read Multi-line Response

Test Command
AT+POP3READ=?

Response
+POP3READ: (range of supported <reqLength>s)
OK
Parameter
See Write Command

Write Command
AT+POP3READ=<
reqLength>

Response
If the data of response not to be read completely:
+POP3READ: 1,<cnfLength>
If the data of response to be read completely:
+POP3READ: 2,<cnfLength>
If some data need to be read,the URC below is reported:
+POP3READ: 3,<dataLength>
If error is related to ME functionality:
ERROR
If some error occur:
+POP3OUT: <code>
Parameter
<reqLength> Requested number of data bytes (1-1460) to be read
<cnfLength> Confirmed number of data bytes to be read, which may
be less than <reqLength>. 0 indicates that no data can be
read.
<dataLength> Received number of data bytes.
<code>
The result of logging out POP3 server
1
Normally log out POP3 server
61
Network error
62
DNS resolve error
63
POP3 tcp connection error
64
Timeout of POP3 server response
69
Read data timeout

Parameter

Saving NO_SAVE

SIM800 Series_AT Command Manual_V1.02

284

2013-10-23

Smart Machine Smart Decision

Mode
Max Response Time

Reference

Note
z Other AT commands (but AT+POP3OUT) can not be executed
until the data of response are read completely.
z If <confLength> is less than <reqLength>, you should wait for a
URC +POP3READ: 3,<dataLength> reported. Then you may
continue to read data by AT+POP3READ.
z If the module has some unread data, the URC +POP3READ:
3,<dataLength> is reported every once in a while. After so
me time, these data are not still read, the module will quit th
e POP3 process.

14.2.20 AT+POP3DEL

AT+POP3DEL
Test Command
AT+POP3DEL=?

Mark the Specific Email to Delete

Mark the Specific Email to Delete

Response
+POP3DEL: (range of supported <msgNumber>s)
OK
Parameter
See Write Command

Write Command
AT+POP3DEL=<m
sgNumber>

Response
OK
If error is related to ME functionality:
ERROR
If POP3 server issues a positive response:
+POP3DEL: 1
If POP3 server issues a negative response:
+POP3DEL: 0
If some error occur:
+POP3OUT: <code>
Parameter
<msgNumber>
The message number of Email
<code>
The result of logging out POP3 server
1
Normally log out POP3 server
61
Network error
62
DNS resolve error
63 POP3 tcp connection error
64 Timeout of POP3 server response

Parameter
Mode

Saving NO_SAVE

SIM800 Series_AT Command Manual_V1.02

285

2013-10-23

Smart Machine Smart Decision

Max Response Time

Reference

Note
The POP3 server marks the Email as deleted. Any future reference to the
message-number associated with the Email in a POP3 command
generates an error. The POP3 server does not actually delete the Email
until the POP3 client logs out POP3 server and closes the session
normally.

14.2.21 AT+POP3RSET

Unmark the Emails that Be Marked as Deleted

AT+POP3RSET

Unmark the Emails that Be Marked as Deleted

Test Command
AT+POP3RSET=?

Response
OK
Parameter

Execution Command Response

AT+POP3RSET
OK
If error is related to ME functionality:
ERROR
If POP3 server issues a positive response:
+POP3RSET: 1
If POP3 server issues a negative response:
+POP3REST: 0
If some error occur:
+POP3OUT: <code>
Parameter
<code>
1
61
62
63
64
Parameter
Mode

The result of logging out POP3 server

Normally log out POP3 server
Network error
DNS resolve error
POP3 tcp connection error
Timeout of POP3 server response

Saving NO_SAVE

Max Response Time

Reference

Note

SIM800 Series_AT Command Manual_V1.02

286

2013-10-23

Smart Machine Smart Decision

14.2.22 AT+POP3OUT

AT+POP3OUT
Test Command
AT+POP3OUT=?

Log Out POP3 Server

Log Out POP3 Server

Response
OK
Parameter

Execution Command Response

AT+POP3OUT
OK
If error is related to ME functionality:
ERROR
If the process is completed, return:
+POP3OUT: <code>
Parameter
<code>
1
61
62
63
64
Parameter
Mode

The result of logging out POP3 server

Normally log out POP3 server
Network error
DNS resolve error
POP3 tcp connection error
Timeout of POP3 server response

Saving NO_SAVE

Max Response Time

Reference

Note

SIM800 Series_AT Command Manual_V1.02

287

2013-10-23

Smart Machine Smart Decision

15 AT Commands for MMS Application

SIM800 series support MMS operation.

15.1 Overview
Command

Description

AT+CMMSCURL

Set the URL of the MMS center

AT+CMMSPROTO

Set the protocol parameter and MMS proxy

AT+CMMSCID

Set the network parameters for MMS

AT+CMMSSENDCFG

Set the parameters for sending MMS

AT+CMMSEDIT

Enter or exit edit mode

AT+CMMSDOWN

Download the file data or title from UART

AT+CMMSDELFILE

Delete the file of the edited MMS by file index

AT+CMMSSEND

Start MMS sending

AT+CMMSRECP

Add recipients

AT+CMMSCC

Add copy recipients

AT+CMMSBCC

Add secret recipients

AT+CMMSDELRECP

Delete recipients

AT+CMMSDELCC

Delete copy recipients

AT+CMMSDELBCC

Delete secret recipients

AT+CMMSRECV

Receive MMS

AT+CMMSVIEW

Get the MMS into buffer and show the information

AT+CMMSREAD

Read the given file of the MMS in the buffer

AT+CMMSRDPUSH

Read the information of the MMS push message

AT+CMMSUA

Set User Agent

AT+CMMSPROFILE

Set User Agent Profile

AT+CMMSTIMEOUT

Set MMS Timeout

AT+CMMSSTATUS

Get MMS Status

AT+CMMSINIT

Initialize MMS Function

AT+CMMSTERM

Exit MMS function

AT+CMMSSCONT

Save MMS context

SIM800 Series_AT Command Manual_V1.02

288

2013-10-23

Smart Machine Smart Decision

15.2 Detailed Descriptions of Commands

15.2.1 AT+CMMSCURL

AT+CMMSCURL

Set the URL of the MMS center

Set the URL of the MMS center

Test Command
Response
AT+CMMSCURL= +CMMSCURL: URL
?
OK
Parameter
See Write Command
Read Command
AT+CMMSCURL?

Response
+CMMSCURL: <mmscurl>
OK
Parameter
See Write Command

Write Command
Response
AT+CMMSCURL= OK
or
<mmscurl>
ERROR
or
+CME ERROR: <err>
Parameter
<mmscurl>
Parameter
Mode

The URL of the MMS center.

Saving AT+CMMSSCONT

Max Response Time

Reference

Note

15.2.2 AT+CMMSPROTO

AT+CMMSPROTO

Set the protocol parameter and MMS proxy

Set the protocol parameter and MMS proxy

Test Command
Response
AT+CMMSPROTO +CMMSPROTO: (0-255).(0-255).(0-255).(0-255),(1-65535)
=?
OK
Parameters
See Write Command

SIM800 Series_AT Command Manual_V1.02

289

2013-10-23

Smart Machine Smart Decision

Read Command
Response
AT+CMMSPROTO +CMMSPROTO: <Gateway>,<Port>
?
OK
Parameters
See Write Command
Write Command
AT+CMMSPROTO
=<Gateway>,<Port
>

Response
OK
or
ERROR
or
+CME ERROR: <err>
Parameters
<Gateway>
<Port>

Parameter
Mode

IP address of MMS proxy.

Port of MMS proxy.

Saving AT+CMMSSCONT

Max Response Time

Reference

Note

15.2.3 AT+CMMSCID

AT+CMMSCID

Set the network parameters for MMS

Set the network parameters for MMS

Test Command
AT+CMMSCID=?

Response
+CMMSCID: (1-3)
OK
Parameter
See Write Command

Read Command
AT+CMMSCID?

Response
+CMMSCID: <value>
OK
Parameter
See Write Command

Write Command
Response
AT+CMMSCID=<v OK
or
alue>
ERROR
or

SIM800 Series_AT Command Manual_V1.02

290

2013-10-23

Smart Machine Smart Decision

+CME ERROR: <err>

Parameter
<value> network parameters, refer to AT+SAPBR
Parameter
Mode

Saving AT+CMMSSCONT

Max Response Time

Reference

Note

15.2.4 AT+CMMSSENDCFG

AT+CMMSSENDCFG

Set the parameters for sending MMS

Set the parameters for sending MMS

Test Command
Response
AT+CMMSSENDC +CMMSSENDCFG: (0-6), (0-3),(0,1), (0,1),(0-2),(0-4),(1-2),(0,1)
FG=?
OK
Parameter
See Write Command
Read Command
Response
AT+CMMSSENDC +CMMSSENDCFG:
FG?
<valid>,<pri>,<sendrep>,<readrep>,<visible>,<class>,<subctrl>,<no
tifrspcheck>
OK
Parameter
See Write Command
Write Command
AT+CMMSSENDC
FG=<valid>[,<pri>[
,<sendrep>[,<readre
p>[,<visible>[,<class
>[,<subctrl>
[,<notifrspcheck>]]]
]]]]

Response
OK
or
ERROR
or
+CME ERROR: <err>
Parameter
<valid> The valid time of sent MMS
0 1 hour
1 12 hours
2 24 hours

SIM800 Series_AT Command Manual_V1.02

291

2013-10-23

Smart Machine Smart Decision

3 2 days
4 1 week
5 maximum
6 Not set (default)
<pri>
Priority
0 lowest
1 normal
2 highest
3 Not Set (default)
<sendrep> Whether it need deliver report
0 No (default)
1 Yes
<readrep> Whether it need receive report
0 No
(default)
1 Yes
<visible> Whether it need show the sender address
0 hide the sender address
1 show the sender address even if it is a secret address
2
Not set (default)
<class> The class of the MMS
0
Personal
1
Advertisement
2
Informational
3
Auto
4
Not set (default)
<subctrl> Subject control
1
For Chinese character code
2
For English character code
<notifrspcheck> Whether it need to check the HTTP response of MMS
notifyrsp ind then to proceed the next step.
0
Waiting for HTTP response
1
Skip waiting for HTTP response
Parameter
Mode

Saving AT+CMMSSCONT

Max Response Time

Reference

Note

15.2.5 AT+CMMSEDIT

AT+CMMSEDIT

Enter or exit edit mode

Enter or exit edit mode

SIM800 Series_AT Command Manual_V1.02

292

2013-10-23

Smart Machine Smart Decision

Test Command
Response
AT+CMMSEDIT=? +CMMSEDIT: (0,1)
OK
Parameter
See Write Command
Read Command
AT+CMMSEDIT?

Response
+CMMSEDIT: <mode>
OK
Parameter
See Write Command

Write Command
Response
AT+CMMSEDIT=< OK
or
mode>
ERROR
or
+CME ERROR: <err>
Parameter
<mode> Whether it allows to edit MMS
0
Not allow to edit MMS
1
Allow to edit MMS
Parameter
Mode

Saving NO_SAVE

Max Response Time

Reference

Note
It includes adding and deleting receipt, downloading and deleting files,
downloading title to edit MMS.

15.2.6 AT+CMMSDOWN

Download the file data or title from UART

AT+CMMSDOWN

Download the file data or title from UART

Test Command
AT+CMMSDOWN
=?

Response
+CMMSDOWN: "PIC", (1-307200), (5000-),"NAME"
+CMMSDOWN: "TEXT", (1-15360), (2000-),"NAME"
+CMMSDOWN: "TITLE", (1-40), (2000-)
OK

Write Command
AT+CMMSDOWN
=<type>,<size>,<tim
e>[,<name>]

Response
CONNECT
or
ERROR

SIM800 Series_AT Command Manual_V1.02

293

2013-10-23

Smart Machine Smart Decision

or
+CME ERROR: <err>

Parameters
<type>

<size>
<time>
<name>

Parameter
Mode

A string parameter which indicates type of downloaded

data
TITLE: MMS title data
TEXT: MMS text data
PIC:
MMS image data
Size in bytes of the data to be downloaded.
Maximum time in milliseconds to download data.
The file name of the image or the text to be downloaded,
including extended name. The default name for image is
image<m>.jpg and the default name for text is
text<n>.txt. <m> and <n> are in the range of 0~255

Saving NO_SAVE

Max Response Time

Decided by <time>

Reference

Note
z It is strongly recommended to set the time long enough to download
all the file data and make sure that the real size of the file to
download is not bigger than <size>.
z The maximum size of <name> is 40 Bytes and only ASCII code is
recognized for <name>.

15.2.7 AT+CMMSDELFILE

AT+CMMSDELFILE

Delete the file of the edited MMS by file index

Delete the file of the edited MMS by file index

Test Command
AT+CMMSDELFI
LE=?

Response
OK

Write Command
AT+CMMSDELFI
LE=<fileIndex>

Response
OK
or
ERROR
or
+CME ERROR: <err>
Parameter
<fileIndex>

The index of the file to be deleted in the MMS. Refer to

+CMMSVIEW

SIM800 Series_AT Command Manual_V1.02

294

2013-10-23

Smart Machine Smart Decision

Parameter
Mode

Saving NO_SAVE

Max Response Time

Reference

Note
This command is valid when it is allowed to edit MMS

15.2.8 AT+CMMSSEND

AT+CMMSSEND
Test Command
AT+CMMSSEND=
?

Start MMS sending

Start MMS sending

Response
+CMMSSEND: "ADDRESS"
OK

Write Command
AT+CMMSSEND=
<address>

Response
OK
or
ERROR
or
+CME ERROR: <err>
Parameter
<address> a string parameter which indicates address of recipients.

Execution Command Response

AT+CMMSSEND
OK
or
ERROR
or
+CME ERROR: <err>
Parameter
Mode

Saving NO_SAVE

Max Response Time

AT+CMMSTIMEOUT

Reference

Note
It is not allowed to input <address> when it not allowed to edit MMS

15.2.9 AT+CMMSRECP

AT+CMMSRECP
Test Command
AT+CMMSRECP=
?

Add recipients

Add recipients
Response
+CMMSRECP: "ADDRESS"
OK

SIM800 Series_AT Command Manual_V1.02

295

2013-10-23

Smart Machine Smart Decision

Read Command
AT+CMMSRECP?

Response
+CMMSRECP: the list of <addr>s
OK
Parameter
See Write Command

Write Command
AT+CMMSRECP=
<addr>

Response
OK
or
ERROR
or
+CME ERROR: <err>
Parameter
<addr>

Parameter
Mode

a string parameter which indicates phone number or email

address of recipients. The maximum length of the string is
40.

Saving NO_SAVE

Max Response Time

Reference

Note
The maximum of recipients is 20 and this command is valid only when it
is allowed to edit MMS

15.2.10 AT+CMMSCC

AT+CMMSCC

Add copy recipients

Add copy recipients

Test Command
AT+CMMSCC=?

Response
+CMMSCC: "ADDRESS"
OK

Read Command
AT+CMMSCC?

Response
+CMMSCC: the list of <addr>s
OK
Parameter
See Write Command

Write Command
Response
AT+CMMSCC=<ad OK
or
dr>
ERROR
or

SIM800 Series_AT Command Manual_V1.02

296

2013-10-23

Smart Machine Smart Decision

+CME ERROR: <err>

Parameter
<addr>

Parameter
Mode

a string parameter which indicates phone number or email

address of copy recipients. The maximum length of the
string is 40.

Saving NO_SAVE

Max Response Time

Reference

Note
The maximum of copy recipients is 20 and this command is valid only
when it is not allowed to edit MMS

15.2.11 AT+CMMSBCC

AT+CMMSBCC

Add Secret Recipients

Add Secret Recipients

Test Command
AT+CMMSBCC=?

Response
+CMMSBCC: "ADDRESS"
OK

Read Command
AT+CMMSBCC?

Response
+CMMSBCC: the list of <addr>s
OK
Parameter
See Write Command

Write Command
AT+CMMSBCC=<
addr>

Response
OK
or
ERROR
or
+CME ERROR: <err>
Parameter
<addr>

Parameter
Mode

a string parameter which indicates phone number or email

address of secret recipients. The maximum length of the
string is 40.

Saving NO_SAVE

Max Response Time

Reference

Note

SIM800 Series_AT Command Manual_V1.02

297

2013-10-23

Smart Machine Smart Decision

The maximum of secret recipients is 20 and this command is valid only

when it is allowed to edit MMS

15.2.12 AT+CMMSDELRECP

AT+CMMSDELRECP

Delete recipients

Delete recipients

Test Command
Response
AT+CMMSDELRE +CMMSDELRECP: "ADDRESS"
CP=?
OK
Write Command
Response
AT+CMMSDELRE OK
or
CP=<addr>
ERROR
or
+CME ERROR: <err>
Parameter
<addr>

a string parameter which indicates phone number or email

address of recipient. The maximum length of the string is
40.

Execution Command Delete all the recipients

AT+CMMSDELRE Response
CP
OK
Parameter
Mode

Saving NO_SAVE

Max Response Time

Reference

Note
This command is valid when it is allowed to edit MMS

15.2.13 AT+CMMSDELCC

AT+CMMSDELCC

Delete copy recipients

Delete copy recipients

Test Command
Response
AT+CMMSDELCC +CMMSDELCC: "ADDRESS"
=?
OK
Write Command
Response
AT+CMMSDELCC OK
or
=<addr>
ERROR
or

SIM800 Series_AT Command Manual_V1.02

298

2013-10-23

Smart Machine Smart Decision

+CME ERROR: <err>

Parameter
<addr>

a string parameter which indicates phone number or

email address of copy recipients. The maximum length of
the string is 40.

Execution Command Delete all the copy recipients

AT+CMMSDELCC Response
OK
Parameter
Mode

Saving NO_SAVE

Max Response Time

Reference

Note
This command is valid when it is allowed to edit MMS

15.2.14 AT+CMMSDELBCC

AT+CMMSDELBCC

Delete secret recipients

Delete secret recipients

Test Command
Response
AT+CMMSDELBC +CMMSDELBCC: "ADDRESS"
C=?
OK
Write Command
Response
AT+CMMSDELBC OK
or
C=<addr>
ERROR
or
+CME ERROR: <err>
Parameter
<addr>

a string parameter which indicates phone number or

email address of secret recipient. The maximum length of
the string is 40.

Execution Command Delete all the secret recipients

AT+CMMSDELBC Response
C
OK
Parameter
Mode

Saving NO_SAVE

Max Response Time

Reference

Note
This command is valid when it is allowed to edit MMS

SIM800 Series_AT Command Manual_V1.02

299

2013-10-23

Smart Machine Smart Decision

15.2.15 AT+CMMSRECV

AT+CMMSRECV

Receive MMS

Receive MMS

Test Command
Response
AT+CMMSRECV= +CMMSRECV: (range of <index>)
?
OK
Write Command
Response
AT+CMMSRECV= +CMMSRECV:
<index>
"<sender>","<time>","<subject>",<size><CR><LF>
list of <fileIndex,name,type,filesize><CR><LF>
OK
or
ERROR
or
+CME ERROR: <err>
Parameters
<index> The index of the push message saved in the SIM message
box.
<sender> The address of the sender
<time>
The time to receive the MMS
<subject> the title of the MMS
<size>
The size of the MMS
<fileIndex,name,type,filesize> The index, name and size of every file
included in the MMS. The types are defined as following.
2
text
3
text/html
4
text/plain
5
image
6
image/gif
7
image/jpg
8
image/tif
9
image/png
10
smil
Parameter
Mode

Saving NO_SAVE

Max Response Time

AT+CMMSTIMEOUT

Reference

Note
z This command is valid only when it is not allowed to edit MMS and
the buffer for MMS will be clear up. So it is recommended to save
the MMS in the buffer before receiving MMS.

SIM800 Series_AT Command Manual_V1.02

300

2013-10-23

Smart Machine Smart Decision

z
z

15.2.16 AT+CMMSVIEW

AT+CMMSVIEW
Test Command
AT+CMMSVIEW=
?

The received MMS is just saved in the buffer but not saved in the
flash.
The maximum number of inclosure is 10.

Get the MMS into buffer and show the information

Get the MMS into buffer and show the information

Response
OK

Execution Command Response

AT+CMMSVIEW
+CMMSVIEW: <mmstype>,"<sender>", "<receipts>", "<ccs>",
"<bccs>", "<datetime>","<subject>",<size><CR><LF>list of
<fileIndex, name, type, filesize><CR><LF>
OK
or
ERROR
or
+CME ERROR: <err>
Parameters
<mmstype> The type of MMS
0
Received MMS
1
Sent MMS
2
Unsent MMS
<sender>
The address of th sender
<receipts>
List of recipients, Separated by ;
<ccs>
List of copy recipients , Separated by ;
<bccs>
List of secret recipients , Separated by ;
<datetime> The time of receive MMS
<subject>
The title of MMS
<size>
Data size of MMS
<fileIndex,name,type,filesize> The index, name and size of every file
included in the MMS. The types are defined as following.
2
text
3
text/html
4
text/plain
5
image
6
image/gif
7
image/jpg
8
image/tif
9
image/png
10
smil

SIM800 Series_AT Command Manual_V1.02

301

2013-10-23

Smart Machine Smart Decision

Parameter
Mode

Saving NO_SAVE

Max Response Time

Reference

Note

15.2.17 AT+CMMSREAD

Read the given file of the MMS in the buffer

AT+CMMSREAD Read the given file of the MMS in the buffer

Test Command
Response
AT+CMMSREAD= OK
?
Write Command
Response
AT+CMMSREAD= +CMMSREAD: <name> <datSize>
<fileIndex>
File content
OK
Parameters
<fileIndex>

<name>
<datSize>
Parameter
Mode

the index of the file to be read from the MMS in the

bufferi.e. the parameter <fileIndex> in
AT+CMMSRECV and AT+CMMSVIEW
the file name to be read
the size of the file to be read.

Saving NO_SAVE

Max Response Time

5s

Reference

Note
If the file type is text, the character set of the output text is Unicode little
endian without the header FF FE.

15.2.18 AT+CMMSRDPUSH

Read the information of the MMS PUSH message

AT+CMMSRDPUSH Read the information of the MMS PUSH message

Test Command
AT+CMMSRDPUS
H=?

Response
+CMMSRDPUSH: (range of <index>)
OK

SIM800 Series_AT Command Manual_V1.02

302

2013-10-23

Smart Machine Smart Decision

Write Command
AT+CMMSRDPUS
H=<index>

Response
+CMMSRDPUSH:
2,<sender>,<subject>,<transaction>,<location>,<time>,<
class>,<size>
OK
or
+CMMSRDPUSH: 6, <receiver>,<time>,<status>
OK
or
+CMMSRDPUSH: 255
OK
or
+CME ERROR: <err>
Parameters
The first parameter of the response should be 2 or 6, or the other type of
the MMS PDU.
2
m-notification-ind[2]. To inform the contents of a
received MMS
6
m-delivery-ind[2]. A delivery report
255 unknown MMS PDU
<index>
The index of the push message saved in the SIM
message box.
<sender>
The address of the sender
<receiver>
The address of the receiver
<subject>
The title of the MMS
<transaction> The X-Mms-Transation-ID[2] of the received MMS
<location>
The X-Mms-Content-Location[2] of the received MMS
<class>
The X-Mms-Class[2] of the received MMS
0
Personal
1
Advertisement
2
Informational
3
Auto
<time>
Date and time of the received push message.
<size>
The size of the MMS
<status>
The status of the sent MMS
0
Expired
1
Retrieved
2
Rejected
3
Defered
4
Unrecognized

SIM800 Series_AT Command Manual_V1.02

303

2013-10-23

Smart Machine Smart Decision

Parameter
Mode

Saving NO_SAVE

Max Response Time

5s

Reference

Note
z This command is valid only when it is not allowed to edit MMS and
the buffer for MMS will be clear up. So it is recommended to save
the MMS in the buffer before receiving MMS.
z The received MMS is just saved in the buffer but not saved in the
flash.

15.2.19 AT+CMMSUA

AT+CMMSUA

Set User Agent

Set User Agent

Test Command
AT+CMMSUA=?

Response
+CMMSUA: "UserAgent"
OK
Parameter
See Write Command

Read Command
AT+CMMSUA?

Response
+CMMSUA: <UA>
OK
Parameter
See Write Command

Write Command
AT+CMMSUA=<U
A>

Response
OK
or
ERROR
or
+CME ERROR: <err>
Parameter
<UA>

Parameter
Mode

string type user agent name

Saving AT+CMMSSCONT

Max Response Time

Reference

Note

SIM800 Series_AT Command Manual_V1.02

304

2013-10-23

Smart Machine Smart Decision

15.2.20 AT+CMMSPROFILE

AT+CMMSPROFILE
Test Command
AT+CMMSPROFI
LE=?

Set User Agent Profile

Set User Agent Profile

Response
+CMMSPROFILE: "UserAgentProfile"
OK
Parameter
See Write Command

Read Command
AT+CMMSPROFI
LE?

Response
+CMMSPROFILE: <UAProfile>
OK
Parameter
See Write Command

Write Command
AT+CMMSPROFI
LE=<UAProfile>

Response
OK
or
ERROR
or
+CME ERROR: <err>
Parameter
<UAProfile>

Parameter
Mode

string type user agent profile

Saving AT+CMMSSCONT

Max Response Time

Reference

Note

15.2.21 AT+CMMSTIMEOUT

AT+CMMSTIMEOUT

Set MMS Timeout

Set MMS Timeout

Test Command
Response
AT+CMMSTIMEO +CMMSTIMEOUT: (10-1000),(10-1000)
UT=?
OK
Parameters
See Write Command

SIM800 Series_AT Command Manual_V1.02

305

2013-10-23

Smart Machine Smart Decision

Read Command
Response
AT+CMMSTIMEO +CMMSTIMEOUT: <Send timeout>,<Recv timeout>
UT?
OK
Parameters
See Write Command
Write Command
AT+CMMSTIMEO
UT=<Send
timeout>,<Recv
timeout>>

Response
OK
or
ERROR
or
+CME ERROR: <err>
Parameters
<Send timeout>
<Recv timeout>

Parameter
Mode

Send timeout time, integer type, in seconds.

Receive timeout time, integer type, in seconds.

Saving AT+CMMSSCONT

Max Response Time

Reference

Note

15.2.22 AT+CMMSSTATUS

AT+CMMSSTATUS
Test Command
AT+CMMSSTATU
S=?

Get MMS Status

Get MMS Status

Response
OK
Parameter
See Write Command

Read Command
AT+CMMSSTATU
S

Response
+CMMSSTATUS:<status>
OK
or
ERROR
or
+CME ERROR: <err>
Parameter
<status>
status of MMS action
MMS_IDLE
MMS_DOWNLOADING
MMS_DOWNLOADED

SIM800 Series_AT Command Manual_V1.02

306

2013-10-23

Smart Machine Smart Decision

MMS_SENDING
MMS_RECEIVING
MMS_RECEIVED
MMS_READING
MMS_READING_PUSH
Parameter
Mode

Saving NO_SAVE

Max Response Time

Reference

Note

15.2.23 AT+CMMSINIT

AT+CMMSINIT
Test Command
AT+CMMSINIT=?

Initialize MMS Function

Initialize MMS Function

Response
OK
Parameter
No Parameter

Execution Command Response

AT+CMMSINIT
OK
or
ERROR
or
+CME ERROR: <err>
No Parameter
Parameter
Mode

Saving NO_SAVE

Max Response Time

Reference

Note
When first entering the MMS function, this command must be executed.

15.2.24 AT+CMMSTERM

AT+CMMSTERM

Exit MMS Function

Exit MMS Function

Test Command
Response
AT+CMMSTERM= OK
?

SIM800 Series_AT Command Manual_V1.02

307

2013-10-23

Smart Machine Smart Decision

Parameter
No Parameter
Execution Command Response
AT+CMMSTERM OK
or
ERROR
or
+CME ERROR: <err>
No Parameter
Parameter
Mode

Saving NO_SAVE

Max Response Time

Reference

Note
When exiting the MMS function, this command must be executed.

15.2.25 AT+CMMSSCONT

Save MMS Context

AT+CMMSSCONT Save MMS Context

Test Command
Response
AT+CMMSSCONT OK
=?
Parameter
See Execution Command
Read Command
Response
AT+CMMSSCONT +CMMSSCONT: <mode>
?
+CMMSCID: <value>
+CMMSCURL: <mmscurl>
+CMMSUA: <UA>
+CMMSPROFILE: <UAProfile>
+CMMSPROTO: <Gateway>,<Port>
+CMMSSENDCFG:<valid>,<pri>,<sendrep>,<readrep>,<visible>,<
class>,<subctrl>,<notifyskip>
+CMMSTIMEOUT: <Send timeout>,<Recv timeout>
OK
Parameter
See Execution Command
Execution Command Response
AT+CMMSSCONT OK
Parameter
<mode>

SIM800 Series_AT Command Manual_V1.02

saved, the value from NVRAM

308

2013-10-23

Smart Machine Smart Decision

For other parameters, see the related command.

Parameter
Mode

Saving NO_SAVE

Max Response Time

Reference

Note

SIM800 Series_AT Command Manual_V1.02

309

2013-10-23

Smart Machine Smart Decision

16 AT Commands for DDET Application

DTMF detection can be set or activated by DDET command.

16.1 Overview
Command

Description

AT+DDET

DTMF detection control

16.2 Detailed Descriptions of Commands

16.2.1 AT+DDET

DTMF Detection Control

AT+DDET DTMF Detection Control

Test Command
AT+DDET=?

Response
+DDET: (0,1) ,(0-10000),(0,1)
OK
Parameter
See Write Command

Read Command
AT+DDET?

Response
+DDET: <mode>,<interval>,<reportMode>
OK
Parameters
See Write Command

Write Command
AT+DDET=<mo
de>[,<interval>][
,<reportMode>]

Response
OK
ERROR
Unsolicited Result Code
1)If <reoportMode> is set to 0
+DTMF: <key>
2)If reportMode is set to 1
+DTMF: <key>,<last time>

SIM800 Series_AT Command Manual_V1.02

310

2013-10-23

Smart Machine Smart Decision

Parameters
<mode> disable or enable DTMF detection control
0 disable
1 enable
< interval > the min interval between two same key URC. The range is
0-10000,the default value is 0. unit is ms.
< reportMode > URC report mode
0 key value reported only
1 key value and last time are reported, the last time is in ms
<key> keytone detected, 1-9,*,#,A,B,C,D
<last time> keytone last time in ms
Parameter Saving AT&W_SAVE
Mode
Max
Time

Response -

Reference

Note
The parameters <interval> and <reportMode> can not power off save

SIM800 Series_AT Command Manual_V1.02

311

2013-10-23

Smart Machine Smart Decision

17 AT Commands for RECORD Application

17.1 Overview
Command

Description

AT+CREC

Record operation

AT+CRECORD

Record and send data to UART

17.2 Detailed Descriptions of Commands

17.2.1 AT+CREC

AT+CREC

record operation

record operation

Test Command
AT+CREC=?

Response
+CREC: (1-n),(1-10)
OK
Parameter
See Write Command

Read Command
AT+CREC?

Response
+CREC: <status>
OK
Parameter
<status>

0 idle state
1 recording state
2 playing state

Write Command Response

AT+CREC=<mo OK
de>,[<id>]
1) mode=1,start record
AT+CREC=1,<id>,<form>,[<time
>][,<location>],[<quality>],[<inputpath>]
OK
2) mode=2,stop record
AT+CREC=2
OK
+CREC: 2,<id>,<form>,<time>,<len>

SIM800 Series_AT Command Manual_V1.02

312

2013-10-23

Smart Machine Smart Decision

3) mode=3,delete record
AT+CREC=3,<id>
OK
4) mode=4,play record file
AT+CREC=4,<id>,<channel>,<level>[,<repeat>]
OK
5) mode=5,stop play record file
AT+CREC=5
+CREC: 0
OK
6) mode=6,read record data
AT+CREC=6,<id>,<len>,<offset>
+CREC: 6,<id>,<len>
<data>
OK
7) mode=7,view record file infomation
AT+CREC=7, [<id>]
+CREC: 7,<id>,<len>,<form>
OK
8) mode=8,query free space
AT+CREC=8
+CREC: 8,<len>
OK
9) mode=9, create record file directory.
AT+CREC=9,<location>
OK
If error is related to ME functionality:
+CME ERROR: <err>
<err> 5000 Be recoding
5001 Be playing
5002 Audio busy
5003 No space
5004 Format error
5005 File operation failure
5006 File is null
5007 File size is error
5008 File is not exist
Parameter

SIM800 Series_AT Command Manual_V1.02

313

2013-10-23

Smart Machine Smart Decision

<n> number of operation support, if SD card is supported, the number

will be 9, or will be 8
<mode> 1 start record
2 stop record
3 delete record
4 play record
5 stop play record
6 get record data in hex format, the max len is 10K in bytes
7 list record files infomation
8 query free space in bytes
9 create record file direcotry
<id>
file ID number, 1-10
<form> record file format
0 AMR
1 WAV
2 WAV_ADPCM
<time> recording time limit. The recording will be stopped if the
recording time reaches the time limit, or there is a mistake/ memory
full/other events disturbed (call setup, etc.)/ Or manual operation.If 0 or
default value is set, no time limit is set.
<channel> channel
0 main channel
1 aux channel
<level>
0-100, play volume
<repeat>
repeate
0 play once
1 play infinitely
<len>
length in bytes
<offset>
offset of the record file , it is less than the length of reord file.
when read the record file, if the len+offset is larger than the file length, then
we need to return to the actural data length.
<data>
record file data in hex format
<location>
record file location
0 system FAT

1 SD card (SIM800V/SIM800W and customized

SIM800H/L support SD card)
<inputpath> input channel
0 MIC1
1 MIC2
<quality>
record quality
0 low
1 medium
2 high
3 best

SIM800 Series_AT Command Manual_V1.02

314

2013-10-23

Smart Machine Smart Decision

Parameter Saving NO_SAVE

Mode
Max
Time

Response -

Reference

Note
z Record willl overwrite the recored file with the same ID
z High priority event will stop recording and save record file.URC will
report +CREC: n,<id>,<form>,<time>,<len>
z About 40K FAT space will remain for system use.
z Call setup will stop the record. If record in call, call release will stop
record too.
z Record in call only record remote input, the setting of input path dont
take effect
z Play in call only support low quality WAV record file.
z Location relative setting only take effect when SD is support and
plugged in
z When DDET is set to 1, record is not allowed in call

17.2.2 AT+CRECORD

Record And Send Data To UART

AT+CRECORD Record And Send Data To UART

Test Command
AT+CRECORD
=?

Response
+CRECORD: (0,1)
OK
Parameters
See Write Command

Write Command
AT+CRECORD
=<mode>[,<inter
val>][,<crcmode
>]

Response
OK
or
+CRECORD:<data>
or
ERROR

SIM800 Series_AT Command Manual_V1.02

315

2013-10-23

Smart Machine Smart Decision

Parameter
<data> UART data output in specified form, which is deciede by
<crcmode>
<mode>
0 stop record
1 start record
<interval> UART data output interval, the range is 1-50, the default value
is 50. unit is 20ms.
<crcmode> data form
0 UART data is the audio data
1 0x7E is added to the head, 0x7E is converted to 0x7D 0x5E, 0x7D is
converted to 0x7D 0x5D.
2 0x7E is added to the head, 0x7E is converted to 0x7D 0x5E, 0x7D is
converted to 0x7D 0x5D,a 2byte CRC code is added to the end
Parameter Saving NO_SAVE
Mode
Max
Time

Response -

Reference

Note
z When AT+CRECORD is set to 1, data mode will be entered and audio
data will output on the UART every the interval time, any input on the
UART will stop the record. AT+CRECORD=0 take no effect.
z AMR 4.75K is supported only
z AMR file head #*AMR\n is not outputed

Note: SIM800L can not support record function.

SIM800 Series_AT Command Manual_V1.02

316

2013-10-23

Smart Machine Smart Decision

18 AT Commands for TTS Application

18.1 Overview
Command

Description

AT+CTTS

TTS operation

AT+CTTSPARAM

Set params of the TTS playing

18.2 Detailed Descriptions of Commands

18.2.1 AT+CTTS
AT+CTTS

TTS Operation

TTS Operation

Test Command
AT+CTTS=?

Response
OK
No prameter

Read Command
AT+CTTS?

Response
+CTTS: <status>
OK
Parameter
<status>

Write Command
AT+CTTS=<mo
de>[,<text>]

0 idle mode
1 play mode

Response
if<mode>=0response
OK
if<mode>=1 or 2response:
OK
+CTTS:0

// speech palyed over

If error is related to MS functionality, response

+CME ERROR: <err>
Parameter
<mode> 0 Stop playing speech
1 Start to play synthetic speech<text> is in UCS2 coding
format.
2 Start to play synthetic speech <text> is in ASCII
coding
format.
Chinese text is in GBK coding format.
<text>
The text which is synthetized to speech to be played, maximum

SIM800 Series_AT Command Manual_V1.02

317

2013-10-23

Smart Machine Smart Decision

data length is 956 Bytes

Parameter Saving NO_SAVE
Mode
Max
Time

Response -

Reference

Note
z Call setup will stop the current tts play
z TTS can play in call, but call release will stop the tts play
z TTS play is not allowed when alert or ring

18.2.2 AT+CTTSPARAM
AT+CTTSPARAM

Set parameters of the TTS playing

Set parameters of the TTS playing

Test Command
Response
AT+CTTSPARAM= +CTTSPARAM: (0-100),(0-3),(1-100),(1-100),(0,1)
?
OK
Parameter
See Write Command
Read Command
Response
AT+CTTSPARAM? +CTTSPARAM: <volume>,<mode>,<pitch>,<speed>,<channel>
OK
Parameter
See Write Command
Write Command
AT+CTTSPARAM=
<volume>,<mode>,
<pitch>,<speed>[,<c
hannel>]

Parameter

Response
OK
If error is related to MS functionality, response
+CME ERROR: <err>
Parameter
<volume> TTS playing volume, the range is 0-100,the default is 50.
<mode> TTS playing mode, the range is 0-3
0
auto read digit, and read digit based on number rule first
1
auto read digit, and read digit based on telegram rule first
2
read digit based on telegram rule
3
read digit based on number rule
<pitch>
TTS playing pitch, the range is 1-100,the default is 50.
<speed> TTS playing speed, the range is 1-100,the default is 50.
<channel>
TTS play channel. The default value of
SIM800V/800W/840W/840V is 1, default value of others is 0.
0
main channel
1
aux channel

Saving NO_SAVE

SIM800 Series_AT Command Manual_V1.02

318

2013-10-23

Smart Machine Smart Decision

Mode
Max Response Time

Reference

Note
TTS play channel setting take no effect in call. TTS play channel depend
on CHFA when in call.

Note: SIM800L can not support TTS function.

SIM800 Series_AT Command Manual_V1.02

319

2013-10-23

Smart Machine Smart Decision

19 Supported Unsolicited Result Codes

19.1 Summary of CME ERROR Codes
Final result code +CME ERROR: <err> indicates an error related to mobile equipment or
network. The operation is similar to ERROR result code. None of the following commands in the
same Command line is executed. Neither ERROR nor OK result code shall be returned.
<err> values used by common messaging commands:
Code of <err>

Meaning

phone failure

no connection to phone

phone-adaptor link reserved

operation not allowed

operation not supported

PH-SIM PIN required

PH-FSIM PIN required

PH-FSIM PUK required

10

SIM not inserted

11

SIM PIN required

12

SIM PUK required

13

SIM failure

14

SIM busy

15

SIM wrong

16

incorrect password

17

SIM PIN2 required

18

SIM PUK2 required

20

memory full

21

invalid index

22

not found

23

memory failure

24

text string too long

25

invalid characters in text string

26

dial string too long

27

invalid characters in dial string

30

no network service

31

network timeout

32

network not allowed - emergency call only

SIM800 Series_AT Command Manual_V1.02

320

2013-10-23

Smart Machine Smart Decision

40

network personalisation PIN required

41

network personalisation PUK required

42

network subset personalisation PIN required

43

network subset personalisation PUK required

44

service provider personalisation PIN required

45

service provider personalisation PUK required

46

corporate personalisation PIN required

47

corporate personalisation PUK required

99

resource limitation

100

unknown

103

Illegal MS

106

Illegal ME

107

GPRS services not allowed

111

PLMN not allowed

112

Location area not allowed

113

Roaming not allowed in this location area

132

service option not supported

133

requested service option not subscribed

134

service option temporarily out of order

148

unspecified GPRS error

149

PDP authentication failure

150

invalid mobile class

160

DNS resolve failed

161

Socket open failed

171

MMS task is busy now

172

The MMS data is oversize

173

The operation is overtime

174

There is no MMS receiver

175

The storage for address is full

176

Not find the address

177

The connection to network is failed

178

Failed to read push message

179

This is not a push message

180

gprs is not attached

181

tcpip stack is busy

182

The MMS storage is full

183

The box is empty

184

failed to save MMS

SIM800 Series_AT Command Manual_V1.02

321

2013-10-23

Smart Machine Smart Decision

185

It is in edit mode

186

It is not in edit mode

187

No content in the buffer

188

Not find the file

189

Failed to receive MMS

190

Failed to read MMS

191

Not M-Notification.ind

192

The MMS inclosure is full

193

Unknown

753

missing required cmd parameter

754

invalid SIM command

755

invalid File Id

756

missing required P1/2/3 parameter

757

invalid P1/2/3 parameter

758

missing required command data

759

invalid characters in command data

765

Invalid input value

766

Unsupported mode

767

Operation failed

768

Mux already running

769

Unable to get control

770

SIM network reject

771

Call setup in progress

772

SIM powered down

773

SIM file not present

791

Param count not enough

792

Param count beyond

793

Param value range beyond

794

Param type not match

795

Param format invalid

796

Get a null param

797

CFUN state is 0 or 4

796

Get a null param

810

No Error

811

Unrecognized Command

812

Return Value Error

813

Syntax Error

814

Unspecified Error

SIM800 Series_AT Command Manual_V1.02

322

2013-10-23

Smart Machine Smart Decision

815

Data Transfer Already

816

Action Already

817

Not At Cmd

818

Multi Cmd too long

819

Abort Cops

820

No Call Disc

821

BT SAP Undefined

822

BT SAP Not Accessible

823

BT SAP Card Removed

824

AT Not Allowed By Customer

19.2 Summary of CMS ERROR Codes

Final result code +CMS ERROR: <err> indicates an error related to message service or network.
The operation is similar to ERROR result code. None of the following commands in the same
Command line is executed. Neither ERROR nor OK result code shall be returned.
<err> values used by common messaging commands:
Code of <err>

Meaning

Unassigned(unallocated) number

No route to destination

Channel unacceptable

Operator determined barring

10

Call barred

11

Reserved

16

Normal call clearing

17

User busy

18

No user responding

19

User alerting, no answer

21

Short message transfer rejected

22

Number changed

25

Pre-emption

26

Non-selected user clearing

27

Destination out of service

28

Invalid number format (incomplete number)

29

Facility rejected

30

Response to STATUS ENQUIRY

SIM800 Series_AT Command Manual_V1.02

323

2013-10-23

Smart Machine Smart Decision

32

Normal, unspecified

34

No circuit/channel available

38

Network out of order

41

Temporary failure

42

Switching equipment Congestion

43

Access information discarded

44

Requested circuit/channel not available

47

Resources unavailable, unspecified

49

Quality of service unavailable

50

Requested facility not subscribed

55

Requested facility not subscribed

57

Bearer capability not authorized

58

Bearer capability not presently available

63

Service or option not available, unspecified

65

Bearer service not implemented

68

ACM equal or greater than ACM maximum

69

Requested facility not implemented

70

Only restricted digital information bearer capability is available

79

Service or option not implemented, unspecified

81

Invalid transaction identifier value

87

User not member of CUG

88

Incompatible destination

91

Invalid transit network selection

95

Semantically incorrect message

96

Invalid mandatory information

97

Message type non-existent or not implemented

98

Message type not compatible with protocol state

99

Information element non-existent or not implemented

100

Conditional information element error

101

Message not compatible with protocol

102

Recovery on timer expiry

111

Protocol error, unspecified

127

Interworking, unspecified

128

Telematic interworking not supported

129

Short message Type 0 not supported

SIM800 Series_AT Command Manual_V1.02

324

2013-10-23

Smart Machine Smart Decision

130

Cannot replace short message

143

Unspecified TP-PID error

144

Data coding scheme (alphabet) not supported

145

Message class not supported

159

Unspecified TP-DCS error

160

Command cannot be acted

161

Command unsupported

175

Unspecified TP-Command error

176

TPDU not supported

192

SC busy

193

No SC subscription

194

SC system failure

195

Invalid SME address

196

Destination SME barred

197

SM Rejected-Duplicate SM

198

TP-VPF not supported

199

TP-VP not supported

208

SIM SMS storage full

209

No SMS storage capability in SIM

210

Error in MS

211

Memory Capacity Exceeded

212

SIM Application Toolkit Busy

213

SIM data download error

224

CP retry exceed

225

RP trim timeout

226

SMS connection broken

255

Unspecified error cause

300

ME failure

301

SMS reserved

302

operation not allowed

303

operation not supported

304

invalid PDU mode

305

invalid text mode

310

SIM not inserted

311

SIM pin necessary

312

PH SIM pin necessary

SIM800 Series_AT Command Manual_V1.02

325

2013-10-23

Smart Machine Smart Decision

313

SIM failure

314

SIM busy

315

SIM wrong

316

SIM PUK required

317

SIM PIN2 required

318

SIM PUK2 required

320

memory failure

321

invalid memory index

322

memory full

323

invalid input parameter

324

invalid input format

325

invalid input value

330

SMSC address unknown

331

no network

332

network timeout

340

no cnma ack

500

Unknown

512

SMS no error

513

Message length exceeds maximum length

514

Invalid request parameters

515

ME storage failure

516

Invalid bearer service

517

Invalid service mode

518

Invalid storage type

519

Invalid message format

520

Too many MO concatenated messages

521

SMSAL not ready

522

SMSAL no more service

523

Not support TP-Status-Report & TP-Command in storage

524

Reserved MTI

525

No free entity in RL layer

526

The port number is already registerred

527

There is no free entity for port number

528

More Message to Send state error

529

MO SMS is not allow

530

GPRS is suspended

531

ME storage full

532

Doing SIM refresh

SIM800 Series_AT Command Manual_V1.02

326

2013-10-23

Smart Machine Smart Decision

19.3 Summary of Unsolicited Result Codes

URC

Description

AT Command

+CCWA:
<number>,<type>,<class>[,<a
lpha>]

Indication of a call that is currently

waiting and can be accepted.

AT+CCWA=1

+CLIP:
<number>,<type>,<subaddr>,
<satype>,<alphaId>,<CLI
validity>

The calling line identity (CLI) of the

calling party when receiving a mobile
terminated call.

+CRING: <type>

Indicates incoming call to the TE if

extended format is enabled.

+CREG: <stat>[,<lac>,<ci>]

There is a change in the MT network

registration status or a change of the
network cell.

+CCWV

Shortly before the ACM (Accumulated

Call Meter) maximum value is reached.
The warning is issued approximately
when 5 seconds call time remains. It is
also issued when starting a call if less
than 5 s call time remains.

AT+CLIP=1

AT+CRC=1

AT+CREG=<n>

AT+CCWE=1

+CMTI: <mem3>,<index>

Indicates that new message has been

received.

AT+CNMI
<mt>=1

+CMT:
<length><CR><LF><pdu>

Indicates that new message has been

received.

AT+CNMI
<mt>=2 (PDU
mode)

+CMT:
<oa>,<scts>[,<tooa>,<fo>,<pi
d>,<dcs>,<sca>,<tosca>,
<length>]<CR><LF><data>

Indicates that new message has been

received.

AT+CNMI
<mt>=2 (text
mode)

+CBM:
<length><CR><LF><pdu>

Indicates that new cell broadcast

message has been received.

AT+CNMI
<bm>=2 (PDU
mode enabled):

+CBM:
<sn>,<mid>,<dcs>,<page>,<p
ages><CR><LF><data>

Indicates that new cell broadcast

message has been received.

AT+CNMI
<bm>=2 (text
mode enabled):

+CDS:
<length><CR><LF><pdu>

Indicates that new SMS status report has

been received.

AT+CNMI
<ds>=1 (PDU
mode enabled):

+CDS:
<fo>,<mr>[,<ra>][,<tora>],<s
cts>,<dt>,<st>

Indicates that new SMS status report has

been received.

AT+CNMI
<ds>=1 (text mode
enabled):

SIM800 Series_AT Command Manual_V1.02

327

2013-10-23

Smart Machine Smart Decision

+COLP:
<number>,<type>[,<subaddr>
,<satype>,<alphaId>]
+CSSU:<code2>

+CSSI:<code1>[,<index>]

The presentation of the COL (Connected

Line) at the TE for a mobile originated
call.
Presentation status during a mobile
terminated call setup or during a call, or
when a forward check supplementary
service notification is received.
Presentation status after a mobile
originated call setup

AT+COLP=1
AT+CSSN=<n>[,<
m>]<m>=1
AT+CSSN=<n>[,<
m>]<n>=1

+CLCC:
<id1>,<dir>,<stat>,<mode>,<
mpty>[,<number>,<type
>,<alphaID>]
[<CR><LF>+CLCC:
<id2>,<dir>,<stat>,<mode>,<
mpty>
[,<number>,<type>,<alphaID
>][...]]

Report a list of current calls of ME

automatically when the current call
status changes.

AT+CLCC=1

*PSNWID: "<mcc>",
"<mnc>", "<full network
name>",<full network name
CI>, "<short network
name>",<short network name
CI>

Refresh network name by network.

AT+CLTS=1

*PSUTTZ:
<year>,<month>,<day>,<hour
>,<min>,<sec>, "<time
zone>",<dst>

Refresh time and time zone by network.

+CTZV: "<time zone>"

Refresh network time zone by network.

DST: <dst>

Refresh Network Daylight Saving Time

by network.

+CSMINS: <n>,<SIM
inserted>

Indicates whether SIM card has been

inserted.

AT+CSMINS=1

+CDRIND: <type>

Indicates whether a CS voice call, CS

data has been terminated.

AT+CDRIND=1

+CHF: <state>

Indicates the current channel.

AT+CHF=1

+CENG:
<cell>,"<arfcn>,<rxl>,<rxq>,
<mcc>,<mnc>,<bsic>,<cellid
>,<rla>,<txp>,<lac>,<TA>"

Report of network information.

AT+CENG=<mod
e>[,<Ncell>]
<mode>=2

+CENG:
<cell>,<mcc>,<mnc>,<lac>,<
cellid>,<bsic>,<rxl>

Limited report of network information.

AT+CENG=<mod
e>[,<Ncell>]
<mode>=3

MO RING

Shows call state of mobile originated

SIM800 Series_AT Command Manual_V1.02

328

2013-10-23

Smart Machine Smart Decision

call: the call is alerted.

AT+MORING=1

MO CONNECTED

Shows call state of mobile originated

call: the call is established.

AT+MORING=1

+CPIN:<code>

Indicates whether some password is

required or not.

AT+CPIN

+CPIN: NOT READY

+CPIN: NOT INSERTED

SIM Card is not ready.

SIM Card is not inserted.

+CSQN: <rssi>,<ber>

Displays signal strength and channel bit

error rate
when <rssi>,<ber>values change.

+SIMTONE: 0
+STTONE: 0

The generated tone playing is stopped or

completed.
The SIM Toolkit tone playing is stopped
or completed.

AT+EXUNSOL="
SQ",1
AT+SIMTONE
AT+STTONE

+CR: <serv>

An intermediate result code is

transmitted during connect negotiation
when the TA has determined the speed
and quality of service to be used, before
any error control or data compression
reports are transmitted, and before any
final result code (e.g. CONNECT)
appears.

AT+CR=1

+CUSD:
<m>[<str_urc>[<dcs>]]

Indicates an USSD response from the

network, or network initiated operation.

AT+CUSD=1

RING

An incoming call signal from network is

detected.
SIM800 is powered down by the
PWRKEY pin or AT command
AT+CPOWD=1.
The module temperature is abnormal.
Refer to hardware document for details.
Under-voltage automatic power down.

NORMAL POWER DOWN

+CMTE: <n>
UNDER-VOLTAGE
POWER DOWN
UNDER-VOLTAGE
WARNNING
OVER-VOLTAGE POWER
DOWN
OVER-VOLTAGE
WARNNING
CHARGE-ONLY MODE
RDY

Call Ready
+CFUN: <fun>

AT+CMTE=1

under-voltage warning
Over-voltage automatic power down.
over-voltage warning
The module is charging by charger.
(require hardware support)
Power on procedure is completed, and
the module is ready to operate at fixed
baud rate. (This URC does not appear
when auto-bauding function is active).
Module is powered on and phonebook
initialization procedure is over.
Phone functionality indication (This

SIM800 Series_AT Command Manual_V1.02

329

AT+IPR=<rate>
<rate> is not 0
AT+CIURC=1
AT+IPR=<rate>

2013-10-23

Smart Machine Smart Decision

URC does not appear when

auto-bauding function is active).

<rate> is not 0

[<n>,]CONNECT OK

TCP/ UDP connection is successful

AT+CIPSTART

CONNECT

TCP/UDP connection in channel mode is

successful

[<n>,]CONNECT FAIL

TCP/UDP connection fails

AT+CIPSTART

[<n>,]ALREADY
CONNECT

TCP/UDP connection exists

AT+CIPSTART

[<n>,]SEND OK

Data sending is successful

[<n>,]CLOSED

TCP/UDP connection is closed

RECV FROM: <IP

ADDRESS>: <PORT>

shows remote IP address and port

(only in single connection mode)

AT+CIPSRIP=1

+IPD, <data
size>,<TCP/UDP>:<data>

display transfer protocol in IP header to

received data or not (only in single
connection mode)

AT+CIPHEAD
AT+CIPSHOWTP

+RECEIVE,<n>,<length>

Received data from remote client (only

in multiple connection mode)

REMOTE IP: <IP

ADDRESS>

Remote client connected in

+CDNSGIP: 1,<domain
name>,<IP>,<IP2>

DNS successful

+CDNSGIP:0,<dns error
code>

DNS failed

+PDP DEACT

GPRS is disconnected by network

+SAPBR <cid>: DEACT

The bearer based on IP connection of

SIMCom application is deactivated.

+HTTPACTION:
<Method>,<StatusCode>,<Da
taLen>

Indicates HTTP method, Status Code

responded by remote server and the
length of data got.

AT+HTTPACTIO
N=<Method>

+FTPGET:1,<res>

FTPGET session

AT+FTPGET=1

+FTPPUT:1,1,<maxlength>

It is ready to upload data.

AT+FTPPUT

+FTPPUT:1,<res>

FTP return result

AT+FTPPUT

+FTPDELE:1,<res>

FTP delete session

AT+FTPDELE

+FTPSIZE:1,<res>,<size>

FTP size session

AT+FTPSIZE

+FTPMKD:1,<res>

FTP create directory (not supported for

all versions)

AT+FTPMKD

+FTPRMD:1,<res>

FTP delete directory (not supported for

all versions)

AT+FTPRMD

+FTPLIST:1,<res>

FTP list session (not supported for all

versions)

AT+FTPLIST

SIM800 Series_AT Command Manual_V1.02

330

AT+CDNSGIP

2013-10-23

Smart Machine Smart Decision

20 AT Commands Examples
20.1 Profile Commands
Demonstration

Syntax

Expect Result

The AT Command interpreter actively

responds to input.

AT

OK

Display the product name and the

product release information.

ATI

SIM800 R11.08
OK

Display
product
identification
information: the manufacturer, the
product name and the product revision
information.

AT+GSV

SIMCOM_Ltd
SIMCOM_SIM800H
Revision:
1308B01SIM800H32
OK

Display current configuration, a list of

the current active profile parameters.

AT&V

[A complete listing of the

active profile]
OK

Reporting of mobile equipment errors.

The default CME error reporting setting
is disabled. Switch to verbose mode
Displays a string explaining the error in
more details.

AT+CMEE=?

+CMEE: (0-2)

AT+CMEE?

OK
+CMEE: 1

AT+CSCS=?

AT+CSCS="TEST"
AT+CMEE=2
AT+CSCS="TEST"

Store the current configuration in

nonvolatile memory. When the board is
reset, the configuration changes from the
last session are loaded.

SIM800 Series_AT Command Manual_V1.02

ATE0&W
AT
[Reset the board]
AT

331

OK
+CSCS:
("IRA","GSM","UCS2","HE
X","PCCP","PCDN","88591")
OK
ERROR
OK
+CME ERROR:
input value

invalid

OK
[No echo]
OK
[No echo]
OK

2013-10-23

Smart Machine Smart Decision

ATE1&W
AT
Set the ME to minimum functionality

[No echo]
OK
[Echo on]
OK

AT+IPR

+IPR:0

AT+CFUN=0

OK
OK

AT+IPR = 115200
AT+IPR?

+CPIN: NOT READY

OK
+IPR:115200

AT+CFUN=0

OK
OK
+CPIN: NOT READY

ME has entered full functionality mode

AT+CFUN?

+CFUN:1
OK

20.2 SIM Commands

Demonstration

Syntax

Expect Result

List available phonebooks, and select the

SIM phonebook.

AT+CPBS=?

+CPBS:
("SM","ME","ON")

Display the ranges of phonebook entries

and list the contents of the phonebook.

AT+CPBS="SM"

OK
OK

AT+CPBR=?

+CPBR: (1-250),40,14

AT+CPBR=1,10

OK
[a listing
contents]

of

phonebook

of

phonebook

OK
Write an entry to the current phonebook.

AT+CPBW=,"13918
18xxxx",129,"Daniel"
AT+CPBR=1,10

SIM800 Series_AT Command Manual_V1.02

332

OK
[a listing
contents]

2013-10-23

Smart Machine Smart Decision

OK
Find an entry in the current phonebook
using a text search.

AT+CPBF="Daniel"

+CPBF:5,
"13918186089",129,"Daniel"
OK

Delete an entry from the current

phonebook specified by its position
index.

AT+CPBW=2
AT+CPBR=1,10

OK
[a listing
contents]

of

phonebook

OK

20.3 General Commands

Demonstration

Syntax

Expect Result

Display the current network operator

that the handset is currently registered
with.

AT+COPS?

+COPS: 0,0,"CHINA
MOBILE"
OK

Display a full list of network operator

names.

AT+COPN

+COPN: "20201",
"COSMO"
[skip a bit]
+COPN:
"901012","Maritime Comm
Partner AS"
OK

reduce its functionality. This will

deregister the handset from the network.

AT+IPR?

AT+CFUN=0
[wait for deregister]
ATD6241xxxx;
AT+CFUN=1
Request the IMSI

AT+CIMI

+IPR: 0
OK
OK
ERROR
OK
460008184101641
OK

20.4 Call Control Commands

Demonstration

Syntax

Expect Result

Make a voice call

ATD6241xxxx;

OK
MS makes a voice call

Hang up a call

ATH

OK

SIM800 Series_AT Command Manual_V1.02

333

2013-10-23

Smart Machine Smart Decision

Call dropped
Make a voice call using the last number
facility. The initial call is established and
then cancelled. The second call is made
using the previous dial string.

ATD6241xxxx;
ATH
ATDL

OK
OK
OK

Example of a MT voice call

Make MT voice call to MS.

ATA
ATH

RING
RING
OK[accept call]
OK[hang up call]

Call related to supplementary service:

AT+CHLD. This Command provides
support for call waiting functionality.

AT+CHLD=<N>

Return
value:(0,1,1x,2,2x,3,4)

Terminate current call and accept waiting

call.
Establish a voice call from EVB, receive
an incoming call (incoming call accepts
waiting status), terminate active call and
accept incoming call. Note call waiting
must be active for this option use
"AT+CCWA=1,1 before running this
demonstration.

AT+CCWA=1,1
ATD6241xxxx;
<RX incoming call>

OK
OK
RING
+CCWA: "62418148 ",
129,1,""
OK
<waiting call active>

Set current call to busy state and accept

waiting call.
Establish a voice call from EVB, receive
an incoming call (incoming call accepts
waiting status), place active call on hold
and switch to incoming call. Terminate
active call and switch back to original
call. Note call waiting must have been
previously
enabled
for
this
demonstration to work.

ATD6241xxxx;
<RX incoming call>

Switch between active and held calls.

Establish a voice call from EVB, receive
an incoming call (incoming call accepts
waiting status), place active call on hold
and switch to incoming call. Switch
between both calls, placing each in the
hold state whilst the other is active
before terminating each one. This feature
relies on knowing each calls ID. This is
done using the List Current Calls
(AT+CLCC) Command. A calls ID is
required to switch between held and

ATD6241xxxx;

SIM800 Series_AT Command Manual_V1.02

AT+CHLD=1

AT+CHLD=2
AT+CHLD=1

<RX incoming call>

AT+CHLD=2

AT+CHLD=21

AT+CLCC

334

RING
+CCWA: "1391818
6089",129,1,""
OK
<waiting call active other
call on hold>
OK
<incoming call terminated,
dialed number now active>
OK
RING
+CCWA: "1391818
6089",129,1,""
OK
<incoming call activated,
original on hold>
OK
<original call activated,
incoming call held>
+CLCC:1,0,0,0,0,"62

2013-10-23

Smart Machine Smart Decision

active calls. Held calls are not

automatically resumed when all other
calls are terminated. They need to be
made active using the AT+CHLD=2x
Command. Note call waiting must have
been previously enabled for this
demonstration to work.

AT+CHLD=22

AT+CHLD=12

418148",129,""
+CLCC:2,1,1,0,0, "139
18186089",129, ""
OK
<Note incoming call held
flag set>
OK
<original call held, incoming
call active>
OK
<terminate incoming call>
<terminate original call>

AT+CHLD=11
Send busy status to incoming waiting
caller.
Establish a voice call from EVB, receive
an incoming call (incoming call accepts
waiting status), send busy status to
waiting mobile. Note call waiting must
have been previously enabled for this
demonstration to work.

ATD6241xxxx;

Drop all calls on hold.

Establish a voice call from EVB, receive
an incoming call (incoming call accepts
waiting status), switch to incoming call
and drop all waiting calls.
Note call waiting must have been
previously
enabled
for
this
demonstration to work.

ATD6241xxxx;

<RX incoming call>

AT+CHLD=0

<RX incoming call>

AT+CHLD=2

AT+CHLD=0

OK
RING
+CCWA: "1391818
6089",129,1,""
OK
OK
<incoming call sent busy
msg, current call retained>
OK
RING
+CCWA: "1391818
6089",129,1,""
OK
<incoming call actived,
original on hold>
OK
<incoming call actived,
current call
terminate>

20.5 SIM Toolkit Commands

Please refer to SIM800 Series_STK_Application Note.DOC

20.6 Audio Commands

Demonstration

Syntax

Expect Result

DTMF tones

AT+CLDTMF=2,
"1,2,3,4,5"

OK

SIM800 Series_AT Command Manual_V1.02

335

2013-10-23

Smart Machine Smart Decision

20.7 SMS Commands

Demonstration

Syntax

Expect Result

Set SMS system into text mode, as

opposed to PDU mode.

AT+CMGF=1

OK

Send an SMS to myself.

AT+CSCS="GSM"

OK

AT+CMGS="+861391
818xxxx"
>This is a test
<Ctrl+Z>

+CMGS:34

Unsolicited notification of the SMS

arriving
Read SMS message that has just arrived.
Note: the number should be the same as
that given in the +CMTI notification.

OK
+CMTI: "SM",1

AT+CMGR=1

+CMGR: "REC UNREAD",

"+8613918186089", "","02
/01/30,20:40:31+00"
This is a test
OK

Reading the message again and change

the status to "READ from UNREAD

AT+CMGR=1

+CMGR: "REC READ",

"+8613918186089","",
"02/01/30,20:40:31+00"
This is a test
OK

Send another SMS to myself.

AT+CMGS="+861391
818xxxx"
>Test again<Ctrl+Z>

Unsolicited notification of the SMS

arriving
List all SMS messages.
Note:ALL must be in uppercase.

+CMGS:35
OK
+CMTI: "SM",2

AT+CMGL="ALL"

+CMGL:
1,
"REC
READ","+8613918186089",
"", "02/01/30,20:40:31+00"
This is a test
+CMGL:
2,
"REC
UNREAD"," ",
"+8613918186089", ""
,"02/01/30,20:45:12+00"
Test again
OK

Delete an SMS message.

SIM800 Series_AT Command Manual_V1.02

AT+CMGD=1

336

OK

2013-10-23

Smart Machine Smart Decision

List all SMS messages to show message

has been deleted.

AT+CMGL="ALL"

+CMGL: 2, "REC READ",

"+8613918186
089","","02/01/30,20:45:12+
00"
Test again
OK

Send SMS using Chinese characters

AT+CSMP=17,167,2,
25
AT+CSCS="UCS2"

OK

AT+CMGS="0031003
300390031003800310
038003x003x003x003
x"
>4E014E50<Ctrl+Z>

+CMGS:36

Demonstration

Syntax

Expect Result

Establish a GPRS context.

Setup modem driver

Should be able to surf the

web using Internet explorer.

OK

OK

20.8 GPRS Commands

Setup
dial
up
connection with *99#
Run internet explorer

There are two GPRS Service Codes for

the ATD Command: Value 88 and 99.
Establish a connection by service code
99.
Establish a connection by service code
99 and using CID 1

ATD*99#

CONNECT

ATD*99***1#

CONNECT

Check if the MS is connected to the

GPRS network

AT+CGATT?

+CGATT:1

Detach from the GPRS network

AT+CGATT=0

OK
OK

Check if the MS is connected to the

GPRS network

AT+CGATT?

+CGATT: 0
OK

SIM800 Series_AT Command Manual_V1.02

337

2013-10-23

Smart Machine Smart Decision

Check the class of the MS

AT+CGCLASS?

+CGCLASS:B
OK

Establish a context using the terminal

equipment: defines CID 1
and sets the PDP type to IP, access
point name and IP address arent set.

AT+CGDCONT=1,
"IP","CMNET"
ATD*99#

OK

Cancel a context using the terminal

equipment

AT+CGDCONT=1,
"IP","CMNET"
ATD*99#

OK

Pause data transfer and enter Command

mode by +++
Stop the GPRS data transfer

+++

OK

ATH

OK

Reconnect a context using the terminal

equipment

AT+CGDCONT=1,
"IP","CMNET"
ATD*99#

OK

+++

OK

ATO

CONNECT

Resume the data transfer

CONNECT

CONNECT

CONNECT

*Quality of Service (QOS) is a special parameter of a CID which consists of several parameters
itself.
The QOS consists of
The precedence class
The delay class
The reliability class
The peak throughput class
The mean throughput class
And is decided in "requested QOS and "minimum acceptable QOS.
All parameters of the QOS are initiated by default value (=0) except the reliability class is 3. To
define a QOS use the AT+CGQREQ or AT+CGQMIN Command.
Overwrite the precedence class of
QOS of CID 1 and sets the QOS of
CID 1 to be present

AT+CGQREQ=1,0,0,3
,0,0

OK

Response: all QOS values of the

activated CID.

AT+CGQREQ?

+CGQREQ: 1,0,0,3,0,0
+CGQREQ: 2,0,0,3,0,0
+CGQREQ: 3,0,0,3,0,0
OK

Set the QOS of CID 1 to not present.

Once defined, the CID can be activated.

SIM800 Series_AT Command Manual_V1.02

AT+CGQREQ=1

338

OK

2013-10-23

Smart Machine Smart Decision

Activate CID 1, if the CID is already

active, the mobile returns OK at once.
If no CID is defined the mobile responds
+CME ERROR: invalid index.
Note: If the mobile is NOT attached
by AT+CGATT=1 before activating, the
attachment is automatically done by the
AT+CGACT Command.

AT+CGACT=1,1

OK

AT+CGACT=1,3

+CME ERROR: requested

service
option
not
subscribed.

Use the defined and activated CID

to get online. The mobile can be
connected using the parameters of
appointed CID or using default
parameter

AT+CGDATA="PPP",
1

CONNECT

The mobile supports Layer 2 Protocol (L2P) PPP only.

Note: If the mobile is NOT attached by AT+CGATT=1 and the CID is NOT activated before
connecting, attaching and activating is automatically done by the AT+CGDATA Command.
Some providers require using an APN to establish a GPRS connection. So if user uses the
Microsoft Windows Dial-Up Network and ATD*9 to connect to GPRS, user must provide the
context definition as part of the modem definition (Modem properties/Connection/Advanced
/Extra settings.) As an alternative, user can define and activate the context in a terminal program
(e.g. Microsoft HyperTerminal) and then use the Dial-Up Network to send only the ATD
Command.

20.9 TCPIP Commands

Please refer to SIM800 Series_TCPIP_Application Note.doc

20.10 IP Commands
Please refer to SIM800 Series_IP_Application Note.doc. Charpter 1 describles how to config
bearer contexts of HTTP and FTP applications

20.11 PING Commands

Demonstration

Syntax

Expect Result

Ping Request

AT+CGATT?

+CGATT: 1

AT+CSTT=CMNET

OK
OK

AT+CIICR

OK

SIM800 Series_AT Command Manual_V1.02

339

2013-10-23

Smart Machine Smart Decision

AT+CIFSR

10.78.245.128

AT+CIPPING=www.
google.cn

+CIPPING:1,"203.208.37.99
",70,239
+CIPPING:2,"203.208.37.99
",53,238
+CIPPING:3,"203.208.37.99
",60,239
+CIPPING:4,"203.208.37.99
",50,239
OK

IP Filter Setting

AT+CIPFLT=1,1,198
.211.19.12,255.255.
0.0

OK

AT+CIPFLT=1,,10.4
3.21.69,255.0.0.0

OK

AT+CIPFLT=0,1

OK

AT+CIPFLT=2

OK

Set the Mode When Receiving an AT+CIPCTL=0

IP Packet

OK

AT+CIPCTL=1

OK

AT+CIPCTL=2

OK

20.12 HTTP and FTP Commands

Please refer to SIM800 Series_IP_Application Note.doc

20.13 GSM Location Commands

Demonstration

Syntax

Expect Result

Activate bearer profile

AT+SAPBR=3,1,"Con
type","GPRS"

OK

AT+SAPBR=3,1,"AP
N","CMNET"

OK

AT+SAPBR =1,1

OK

AT+SAPBR=2,1

+SAPBR: 1,1,"10.89.193.1"

SIM800 Series_AT Command Manual_V1.02

340

2013-10-23

Smart Machine Smart Decision

OK
Get location

AT+CIPGSMLOC=1,
1

AT+CIPGSMLOC=2,
1

+CIPGSMLOC:
0,121.354848,31.221402,201
1/01/26,02:41:06
OK
+CIPGSMLOC:
0,2011/01/26,03:12:58
OK

Deactivate bearer profile

AT+SAPBR=0,1

OK

20.14 EMAIL Commands

Please refer to SIM800 Series_Email_Application Note.doc.

20.15 MMS Commands

Demonstration

Syntax

Expect Result

Initialization

AT+CMMSINIT

OK

Configuration

AT+CMMSCURL=m
msc.monternet.com

OK

AT+CMMSCID=1

OK

AT+CMMSPROTO=
10.0.0.172,80

OK

Active bearer profile

Send MMS

SIM800 Series_AT Command Manual_V1.02

AT+CMMSSENDCF
G=6,3,0,0,2,4

OK

AT+SAPBR=3,1,"Con
type","GPRS"

OK

AT+SAPBR=3,1,"AP
N","CMWAP"
AT+SAPBR=1,1

OK

AT+SAPBR=2,1

+SAPBR: 1,1,"10.89.193.1"
OK

AT+CMMSEDIT=1

OK

AT+CMMSDOWN=
PIC,12963,20000

CONNECT
... ...

341

OK

2013-10-23

Smart Machine Smart Decision

OK
AT+CMMSDOWN=
TITLE,3,5000
AT+CMMSRECP=1
3918181818

Receive MMS
When
received
a
MMS
push
message,UART will output message,such
as +CMTI: "SM",3,"MMS PUSH"

Receive MMS when the MMS push

message is a concatenated message.
UART output messages:
+CMTI: "SM",1,"MMS PUSH",2,1
+CMTI: "SM",2,"MMS PUSH",2,2
+CMTI: "SM",1,"MMS PUSH"

CONNECT
... ...
OK
OK

AT+CMMSSEND

OK

AT+CMMSEDIT=0

OK

AT+CMMSRECV=3

+CMMSRECV:
"+8613818181818",
"2008-05-02, 03:38:12","",
26670
1, "image0.jpg",7,26625

AT+CMGD=3

OK
OK

AT+CMMSEDIT=0

OK

AT+CMMSRECV=1

+CMMSRECV:
"+85266097746","2009-04-1
5,10:41:21","",49
1,"text0.txt",4,7

AT+CMGD=1

OK
OK

Read a file of MMS

AT+CMMSREAD=1

+CMMSREAD:
"image0.jpg", 26625

OK

Exit MMS function

AT+CMMSTERM

OK

Demonstration

Syntax

Expect Result

enable DTMF detection

AT+DDET=1,0,0
//start DDET, interval
is 0, report mode is 0

OK

Set up a call connection

ATD***********;

OK
If module detected DTMF,

20.16 DDET Commands

SIM800 Series_AT Command Manual_V1.02

342

2013-10-23

Smart Machine Smart Decision

URC will be reported via

serial port
+DTMF:1
//report DTMF value
+DTMF:2
+DTMF:3
Receive an incoming call

ATA

OK
If module detected DTMF,
URC will be reported via
serial port
+DTMF:1
//report DTMF value
+DTMF:2
+DTMF:3
+DTMF:4

enable DTMF detection

AT+DDET=1,1000,1
//start DDET, interval
is 1000ms, report
mode is 1

OK

Set up a call connection

ATD***********;

OK
If module detected DTMF,
URC will be reported via
serial port, the minimal
interval between two identic
DTMF is 1000ms.
+DTMF:1,160
//report DTMF value
and last time
+DTMF:2,300
+DTMF:3,200

Receive an incoming call

SIM800 Series_AT Command Manual_V1.02

ATA

343

OK
If module detected DTMF,
URC will be reported via

2013-10-23

Smart Machine Smart Decision

serial port
+DTMF:1,160
//report DTMF value
and last time
+DTMF:2,300
+DTMF:3,200

20.17 RECORD Commands

Demonstration

Syntax

Expect Result

Start record

AT+CREC=1,1,0
//start record

OK
// the record id is 1, format is
AMR

Stop record

AT+CREC=2
//stop record

OK
+CREC: 2,1,0,15,16386
//a URC will reported after
stop, which indicate the
format,record id, times in
seconds, length in bytes

Delete record

AT+CREC=3,1
//delete record with id
1

OK

Play record file

AT+CREC=4,1,0,80
//play record file,
channel is 0, the
volume is 80

OK

Stop play record file

AT+CREC=5
//stop play record file

+CREC: 0
OK
//URC is reported to show
statues IDLE

Get record status

AT+CREC
//get record status

+CREC:2
OK
//Rrecording ,delete and
other play operations are not
allowed when playing

List record file information

AT+CREC=7
//list record file list

+CREC: 7,1,7728,0
+CREC: 7,2,53820,1
OK

SIM800 Series_AT Command Manual_V1.02

344

2013-10-23

Smart Machine Smart Decision

// two record file, one Is

Get record file data

AT+CREC=6,1,200,0
//get 200 bytes from
record file with offset 0
to file head

+CREC: 6,1,200
2321414D520A04923231D8
28E7B0E222B6D0B604941
AEC23377C8A442AFC934
40450E0133334D31577CB8
E88FE0450A54AD57AC23
086C24529FC0422434276A
B0E88DCF481E23A0419F0
50336489D54CB57224B004
2119466B5B5521D542FF35
4204C0422385A00B20DBC
67DC322049D87084889706
30CECBFE40004C0892EF5
914BD62A234C0B5804334
110F8818197ECA9D7F02E
046EDAD5EBA75928D948
FBB19E046EAF1C3A90168
351C302DF8804460C1409B
18966E0187F88B404CA88F
4F891BFE72BCF45D7
OK
//data in Hex format

Query free space

AT+CREC=8
//query free memory
space

+CREC: 8,938600

AT+CREC=9,0
//create record file
directory on system
FAT

OK

Demonstration

Syntax

Expect Result

Play synthetic speech with UCS2 coding

text

AT+CTTS=1,"6B228F
CE4F7F75288BED97
F3540862107CFB7E
DF"
// text in UCS2 coding
formatcontext of the

OK
//speech synthetized
successfully, played locally.
+CTTS:0
//speech played over Note:
User
needs
to
wait

Create record file directory

OK
//the free memory space is
938600 bytes

20.18 TTS Commands

SIM800 Series_AT Command Manual_V1.02

345

2013-10-23

Smart Machine Smart Decision

text is

thisresponse to play next

speech!

Play synthetic speech with ASCII coding

text

AT+CTTS=2,"hello

"
// text in ASIIC coding
format.Chinese
in
GBK coding format.

OK
//speech synthetized
Successfully played locally.
+CTTS:0
//speech played over. Note:
User
needs
to
wait
thisresponse to play next
speech!

Stop playing TTS

AT+CTTS=0
//Stop
playing
synthetic speech

OK
//speech played over.

Set parameters of the TTS playing

AT+CTTSPARAM=5
0, 0,50,25,1
// set params of the
TTS playing

OK
// set params over.

SIM800 Series_AT Command Manual_V1.02

346

2013-10-23

Smart Machine Smart Decision

21 ATC Differences among SIM800 Series

21.1 AT+CSDT
SIM800V

SIM800H/L,SIM800W,SIM800
AT+CSDT=?
+CSDT: (0-1)
OK
AT+CSDT?
+CSDT: <mode>
OK
AT+CSDT= <mode>
OK
ERROR

Difference: SIM800V does not support this AT command

21.2 AT+CSMINS
SIM800V

SIM800H/L,SIM800W,SIM800
AT+CSMINS=?
+CSMINS: (list of supported <n>s)
OK
AT+CSMINS?
+CSMINS: <n>,<SIM inserted>
OK
AT+CSMINS=<n>
OK
ERROR

Difference: SIM800V does not support this AT command

21.3 AT+SGPIO
SIM800V,SIM800W

SIM800H/L,SIM800

AT+SGPIO=?
+SGPIO: (0-1),(1-11),(0-1),(0-1)

AT+SGPIO=?
+SGPIO: (0-1),(1-3),(0-1),(0-1)

SIM800 Series_AT Command Manual_V1.02

347

2013-10-23

Smart Machine Smart Decision

OK

OK

Difference: Parameter different

21.4 AT+CBAND
SIM800W, SIM800V

SIM840W,SIM840V, SIM800H/L,SIM800

AT+CBAND=?
+CBAND:
(EGSM_MODE,DCS_MODE,EGSM_DCS
_MODE,ALL_BAND)

AT+CBAND=?
+CBAND:
(EGSM_MODE,DCS_MODE,GSM850_MOD
E,PCS_MODE,EGSM_DCS_MODE,GSM850
_PCS_MODE,EGSM_PCS_MODE,ALL_BAN
D)

OK

OK
Difference:
SIM800,SIM840W,SIM840V, SIM800H/L support Quad-band.

21.5 AT+CTTSPARAM
SIM800W, SIM800V, SIM840W,SIM840V

, SIM800H/L,SIM800

AT+CTTSPARAM?
+CTTSPARAM: 50,0,50,50,1

AT+CTTSPARAM?
+CTTSPARAM: 50,0,50,50,0

OK

OK

Difference:
Default value of output channel is different

21.6 AT+CHFA
SIM800W, SIM800V, SIM840W,SIM840V

, SIM800H/L,SIM800

AT+CHFA=?
+CHFA: (0 = NORMAL_AUDIO, 1 =
AUX_AUDIO)

AT+CHFA=?
+CHFA: (0 = NORMAL_AUDIO, 1 =
AUX_AUDIO, 2 = HANDFREE_AUDIO,
3 = AUX_HANDFREE_AUDIO, 4 =
PCM_AUDIO)

OK

OK
Difference:

SIM800 Series_AT Command Manual_V1.02

348

2013-10-23

Smart Machine Smart Decision

z
z

In SIM800H/L,channel 2 is the same with channel 0, channel 3 is the same with channel
1.channel 4 is multiplexed
Only channel 0 and 2 are available in SIM800.

SIM800 Series_AT Command Manual_V1.02

349

2013-10-23

Smart Machine Smart Decision

Contact us:
Shanghai SIMCom wireless solutions Ltd.
Address: Building A, SIM Technology Building, No. 633 Jinzhong Road, Shanghai,
P. R. China 200335
Tel: +86 21 3252 3300
Fax: +86 21 3252 2030
URL: www.sim.com/wm

SIM800 Series_AT Command Manual_V1.02

350

2013-10-23