Scribd
Upload
169 views

Thrust Retainer Ring-TP11 PDF

This technical publication describes a countermeasure to prevent the thrust retainer ring from detaching or breaking on several Canon imageRUNNER models. Specifically, it involves replacing the old bushing spacer and thrust retainer ring with new components that have a convex protrusion to better attach to the fixing roller and prevent future issues. The fixing roller also needs replacing on some 6000 series models to accommodate the new bushing spacer shape. Instructions are provided on installing the new components correctly.

Uploaded by

ereslomaximo2014
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
169 views

Thrust Retainer Ring-TP11 PDF

This technical publication describes a countermeasure to prevent the thrust retainer ring from detaching or breaking on several Canon imageRUNNER models. Specifically, it involves replacing the old bushing spacer and thrust retainer ring with new components that have a convex protrusion to better attach to the fixing roller and prevent future issues. The fixing roller also needs replacing on some 6000 series models to accommodate the new bushing spacer shape. Instructions are provided on installing the new components correctly.

Uploaded by

ereslomaximo2014
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

e-Support Filename:

Date:

TP11 342.pdf
11-01-11

PRODUCTS AFFECTED / SERIAL NUMBERS AFFECTED:


See Table Below
SUBJECT:
Countermeasure to Prevent the Thrust Retainer Ring from Detaching or Breaking
PRODUCTS AFFECTED / SERIAL NUMBERS AFFECTED:
Products Affected:

Serial Numbers Affected:

imageRUNNER ADVANCE 8105

TBD

imageRUNNER ADVANCE 8095

TBD

imageRUNNER ADVANCE 8085

TBD

imageRUNNER ADVANCE 6075

TBD

imageRUNNER ADVANCE 6065

TBD

imageRUNNER ADVANCE 6055

TBD

GENERAL:
This Technical Publication describes the countermeasure to prevent the Thrust Retainer Ring from
detaching or breaking.
DETAILS:
Symptom:
When the Main Engine is in operation, the Thrust Retainer Ring [3] on the Upper Fixing Roller [5]
(Figures 1 and 2) of the Fixing Assembly [1] may detach or break. This can cause an E840-0001(Fixing
Shutter Motor ) error code to occur.

THIS TECHNICAL PUBLICATION IS THE PROPERTY OF CANON U.S.A. INC. AND CONTAINS CONFIDENTIAL INFORMATION OWNED BY OR LICENSED TO,
CANON U.S.A., AUTHORIZED CANON U.S.A., DEALERS MAY USE THIS TECHNICAL PUBLICATION FOR REFERENCE PURPOSES ONLY. ANY OTHER USE
BY AN AUTHORIZED CANON USA DEALER, OR USE BY ANY THIRD PARTY, IS PROHIBITED.
For additional technical information, please visit the Canon Systems and Technical Support Division website at:
www.support.cusa.canon.com. You can also call the Technical Support Center at 1-800-528-2830 or contact your Regional Support Office.

Page 1 of 6

e-Support Filename:
Date:

TP11 342.pdf
11-01-11

Cause:
In normal operation, the Bushing Spacer [4] rotates together with the Upper Fixing Roller [5]. However,
when the Bushing Spacer [4] does not rotate along with the Upper Fixing Roller [5], the friction created by
this phenomenon may force the Bushing Spacer [4] outward. This may result in the outside area of the
Bushing Spacer to detach or break from the Upper Fixing Roller [5].

Figure 1
[1]Fixing Assembly [2] Upper Fixing Assembly

Figure 2
[3]Thrust Retainer Ring
[4] Bushing Spacer
[5] Fixing Roller

Page 2 of 6

e-Support Filename:
Date:

TP11 342.pdf
11-01-11

Factory:
The shape of the Bushing Spacer [4] has been changed to a new type. To accommodate this change, the
Upper Fixing Roller [5] for the imageRUNNERADVANCE 6000 series was changed to a new type.

The Upper Fixing Roller for the imageRUNNER ADVANCE 8000 series has not
changed.

SERVICING PROCEDURE:
Service work:
When the Fixing Roller Thrust Retainer Ring [3] detaches or breaks from the Upper Fixing Roller [5],
replace the Fixing Roller Thrust Retainer Ring [3] and the new type [B] Bushing Spacer [4] at the same
time. The new type Bushing Spacer [B] has a convex protrusion to hook on the Upper Fixing Roller [5].
NOTE:
Refer to Technical Publication TP11 174 E840 Error Code Avoidance for proper
installment of the Thrust Retainer Ring on the Upper Fixing Roller.

Figure 3
Bushing Spacer
[A] Old type [B] New type

Page 3 of 6

e-Support Filename:
Date:

TP11 342.pdf
11-01-11

The new type of Bushing Spacer [B] alone cannot be attached to the Upper Fixing Roller of the
imageRUNNER ADVANCE 6000 series. When replacing the Bushing Spacer, make sure to replace the
Upper Fixing Roller [D] with a new type Upper Fixing Roller at the same time. The new type Bushing
Spacer [B] for the imageRUNNER ADVANCE 8000 series can be attached to the current ADVANCE 8000
Series Upper Fixing Roller.

Figure 4
iR ADV6000 Series Fixing Roller
[C]Old type [D] New type
Note:
When attaching the Bushing Spacer and the Thrust Retainer Ring to the Upper Fixing Roller, follow the
procedure below:

NOTE:
Refer to Technical Publication TP11 174 E840 Error Code Avoidance for proper
installment of the Thrust Retainer Ring on the Upper Fixing Roller.

Page 4 of 6

e-Support Filename:
Date:

TP11 342.pdf
11-01-11

How to attach the New Type Bushing Spacer

1.Place the Bushing Spacer on


the Upper Fixing Roller at an
angle.

2. Insert the protrusion of the


Bushing Spacer in the slit of
the Upper Fixing Roller.

3. Keep the protrusion of the


Bushing Spacer in the slit and
slide in place the Bushing
Spacer on the Upper Fixing
Roller.

Bushing Spacer
Thrust Retainer Ring

4. Place Thrust Ring Retainer over Bushing Spacer


Page 5 of 6

e-Support Filename:
Date:

TP11 342.pdf
11-01-11

SERVICE PARTS:

Description

Part Number

Old

Bushing Spacer

FC9-8067-000

New

Bushing Spacer

FE2-0550-000

Old

Upper Fixing Assembly

FM3-7358-010

New

FM3-7358-020

Old

*Upper Fixing Assembly


** Upper Fixing Assembly

New

Upper Fixing Assembly

FM3-7340-020

Old

*Fixing Roller

FC9-9163-000

New

Fixing Roller

FC9-9163-010

Figure
Number

FM3-7340-010
811

Old

Retainer, Fixing Roller, Thrust

FC6-3501-000

New

Retainer, Fixing Roller, Thrust

FC6-3501-020

*FM3-7358-000 and FC9-9163-000 are for the imageRUNNER ADVANCE 6000 series.
**FM3-7340-000 is for the imageRUNNER ADVNCE 8000 series.

NOTE:
Replace the following parts for the imageRUNNER ADVANCE 6000 Series at the same time
upon initial installation of the new type Bushing Spacer:
1. Fixing Roller- FC9-9163-000
2. Retainer, Fixing Roller Thurst-FC6-3501-020
3. Bushing Spacer- FE2-0550-000
The Upper Fixing Roller for the imageRUNNER ADVANCE 8000 series has not
changed.

Page 6 of 6

You might also like