Scribd
Upload
92 views

IPSS: 1-03-024-09 Standard Information For Enquiry and Order For H T Squirrel Cage Induction Motors Ipss

The document provides a standard format for inquiries and orders for high temperature squirrel cage induction motors. It lists 42 points of information that should be included, such as site operating conditions, testing requirements, dimensional drawings, load details, efficiency data, and other motor specifications.

Uploaded by

GopalMahanta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
92 views

IPSS: 1-03-024-09 Standard Information For Enquiry and Order For H T Squirrel Cage Induction Motors Ipss

The document provides a standard format for inquiries and orders for high temperature squirrel cage induction motors. It lists 42 points of information that should be included, such as site operating conditions, testing requirements, dimensional drawings, load details, efficiency data, and other motor specifications.

Uploaded by

GopalMahanta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

IPSS

STANDARD INFORMATION FOR


ENQUIRY AND ORDER FOR H T
SQUIRREL CAGE
INDUCTION
MOTORS
(SECOND REVISION)

IPSS: 1-03-024-09
Formerly:
IPSS:1-03-024-03

BASED ON IS 4722:2001

0. FOREWORD
0.1

This Interplant Standard has been prepared by the Standards Committee on Rotating Electrical Machinery, IPSS
1:3 with the active participation of the representatives of the steel plants and reputed consultancy organizations;
and was adopted in September 2009.

0.2

Interplant Standards for steel industry primarily aim at achieving rationalization and unification of parts and
assemblies used in steel plant equipment and accessories, and provide guidance in indenting stores or equipment
(or while placing orders for additional requirements) by individual steel plants. For exercising effective control on
inventories, it is advisable to select a fewer number of sizes (or types) from among those mentioned in this
standard, for the purpose of company standards of individual steel plants. It is not desirable to make deviations in
technical requirements.

0.3

This Interplant Standard should be read in conjunction with the published Interplant standards on electric motors.

0.4

This Interplant Standard was originally published in 1995. This revision has been carried out to take care of some
more information pertaining to H T squirrel cage induction motors & to make a user-friendly format for giving
information.

PAGE 1/7

IPSS: 1-03-024-09

INFORMATION TO BE GIVEN WITH ENQUIRY AND


ORDER FOR H T SQUIRREL CAGE INDUCTION
MOTORS
1.

Reference to IPSS

2.

Site and operating conditions


a)
b)
c)
d)
e)
f)
g)
h)

Ambient temperature
Maximum humidity
Altitude of installation
Environment condition
Rated voltage & permissible variation
Frequency and permissible variation
Power supply system earthed/unearthed
System fault level.

3.

Degree of protection

4.

Type of duty as per IS 4722:2001

5.

Method of cooling

6.

Type of mounting

7.

Rated output in kW at 50 deg C

INFORMATION

+10%.
+3, -6%.

IP ___ as per IS 4691.

IC__ as per IS 6362:1995

PAGE 2/7

IPSS: 1-03-024-09

INFORMATION TO BE GIVEN WITH ENQUIRY AND


ORDER FOR H T SQUIRREL CAGE INDUCTION
MOTORS

INFORMATION

8(a) Class of insulation


(Material of insulation preferences, if applicable to
be specified).
(b) Permitted temperature rise above the specified
ambient temperature.
9.

Rated & synchronous speed (rpm)

10.

Direction of rotation, viewing from driving end

Clockwise / anti-clockwise

11.

Direction of rotation

Uni-directional / Bi-directional

12.

Tests at manufacturers works


a)
b)

Routine (As recommended in IS 325)


Type tests (to be specified)

13.

Basic dimensional drawing giving H, B, A, C, E, D,


F (Letter symbols used conform to IS 8223:1999)

14.

Maximum temperature of inlet cooling medium

PAGE 3/7

IPSS: 1-03-024-09

INFORMATION TO BE GIVEN WITH ENQUIRY AND


ORDER FOR H T SQUIRREL CAGE INDUCTION
MOTORS

15. Details of Shaft extension required, details of


keyway etc
16.

Method of starting to be employed

17.

Tstart / Trated

18.

Tmax / Trated

19.

Tpull-up / Trated

20.

Istart / Irated

PAGE 4/7

INFORMATION

IPSS: 1-03-024-09

INFORMATION TO BE GIVEN WITH ENQUIRY AND


ORDER FOR H T SQUIRREL CAGE INDUCTION
MOTORS
21.

No. of starts

23.

Rotor type

a) No of cold consecutive
starts
b) No of hot consecutive
Starts
c) No of equally spread
Starts per hour.

YES/NO
a) Any VVVF application
b) Special design considered for IGBT based inverter YES/NO
feeding
c) Any switching surges due to vacuum contactor/VCB YES/NO
starting
d) Lowest speed, if applicable and duty cycle
24.
Locked rotor withstand time at 100% voltage
; cold/hot.. Thermal withstand time
25. Surge withstand capacity
26 Terminal box as per IS 1231:1974
-

Designated fault level ( kA)


Phase seggregated stator terminal box position as
viewed from drive end (left/right/top)
Neutral & main terminal box position (shall be
interchangeable)
Auxiliary terminal box position
PAGE 5/7

INFORMATION

IPSS: 1-03-024-09
-

CT terminal box (If applicable) position


Degree of protection (IP____)
Other requirements (silica gel desiccator/pressure
relief diapharagm)

27. Noise level as per IS 12065:1987


28. Earthing as per IS 3043:1987
29. Weight of stator
Weight of rotor
30. Greasing provision shall be there for non-pedestal
anti-friction bearings
31.

Type of load and its description

32. a) RTD for winding or bearing


b) thermistor
c) space heater
d) vibration monitor
e) CT for differential protection.
33. G.A. drawing for motors & terminal boxes
34.

GD2 value of load referred to the motor shaft

35.

Acceleration time with drive attached

36.

Mode of power transmission & type of coupling

37.

Efficiency at 50%, 75%, 100% of load.

38.

Power factor
PAGE 6/7

IPSS: 1-03-024-09

39.

Type of Bearing i) Pedestal


ii) Antifriction Bearing

40.

Following data/drawing to be furnished :

Speed Vs torque characteristics curve


Current vs time curve
CT characteristics, if applicable
Torque speed curve
Thermal withstand curve

41. G.A. drawing number.


42.

Any other specific requirement

PAGE 7/7

You might also like