CENTUM CS3000 R3

ENGINEERING COURSE

Day 2

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

Control Drawing Builder

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

FCS INPUT AND OUTPUT FUNCTION

The input and output function support the internal data exchange
inside FCS
and external data exchange between FCS and other equipment.
There are two I/O functions
1. Process I/O function.
2. Software I/O function.

Software I/O function. (For Sequence Control)

Process I/O function. (For Loop Control)

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

Process input and output

Process I/O modules transfer signal between FCS and field device.

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

Process input and output

When defining IOM for FFCS,the IOM created under the [NODE1-4] folder.
Right click [NODE] Folder
[Create new]
[IOM]

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

IOM Definition builder

Ex.

AAI141 Analog Input Module (4 20 mA, 16 Channel,Non-Isolated)

Terminal Name
%Znnspcc
nn : Node Number.(1 - 10)
s : Slot Number.(1 - 8)
p : Port Number.(1 - 4)
Cc : Terminal Number.(1 - 64)

P & ID Tag Name

A P & ID Tag name of up to 16 characters can be specified in the IOM definition Builder.

Service Comment
A character string consist of up to 40 characters can be entered.
Instrumentation & Automation Education Center (IAEC)
Yokogawa (Thailand) Ltd.

Label
As the name of the function blocks input/output terminal.
The entry format of user-defined labels is as follows:
%%Mnnnnnnnnnnnnn
M
: One uppercase letter
Nnnnnnnnnnnnn : up to 13 alphanumeric characters.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

IOM Definition builder

Ex

ADV157 Digital input (32-Channel Status Input)

Terminal Name
%Znnspcc
nn : Node Number.(1 - 10)
s : Slot Number.(1 - 8)
p : Port Number.(1 - 4)
Cc : Terminal Number.(1 - 64)

P & ID Tag Name

A P & ID Tag name of up to 16 characters can be specified in the IOM definition
Builder.
Switch Position Label
The list of labels for switch position that can be used in the system is displayed
area.
Service Comment
A character string consist of up to 40 characters can be entered.
Tag Name
A User defined tag name is a string up to 16 alphanumeric characters

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

Create Function Blocks

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

Control Drawing Builder

The Control Drawing Builder is used to configure the basic control functions of the FCS.
For CS3000
Up to 200
Pages

Double Click

Drawing Comment

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

Control Drawing Builder Settings

Panel Size can be set by [File] [Properties] then selecting the [Attributes Tab].

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

Grid Setting
For easy drawing, you can display the grid on the drawing panel. [Draw] [Grid Option].

Click

Set Grid Size

Click

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

Function Block Creation

Select Mode
Function Block
Wiring
Double Click

Edit Function
Block Detail
Click

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

Function Block Detail Builder

Click to Show
Detailed Setting

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Function Block
The object that represents the function block is called function block symbol.

Tag
Tag name
name
Terminal
Terminal name
name

Block
Block model
model

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

I/O
I/O connection
connection terminal
terminal
(Terminal
(Terminal area)
area)

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

Data Link Block

PIO
PIO

AREAIN
AREAIN

AREAOUT
AREAOUT

An I/O data link block can connect to a process I/O or software I/O.
An external data link block connect to a function block defined in other control drawings
or a function block defined on other control stations.

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

Wiring

Wiring

This object represent the flow of data between function blocks or between
a function block and data link block.

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

Text
This object represents an arbitrary character string.

Text

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

Wiring of Function Blocks : Loop Connection

By performing the I/O connection, data can be exchanged between a function block
and the connection destination according to the connection method.

Data Connection
-Data Reference
Data reference is a type of data connection in which data read from the
connection of the function block input terminal. The data value of the
connection destination is read as an input value of the function block in
data reference.
-Data Setting
Data setting is a type of data connection in which data written into the
connection destination from the function output terminal. The value of the
function block output data is sent to the connection destination.

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

Data Connection with Other Function Blocks

Is an I/O connection that connects data items such as process variables(PV) and
manipulated output values(MV) held in the other function blocks, to the function
block I/O terminals.

Data reference

Data Setting

Data reference

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

Process Connection
connection with Process I/O
Is an I/O connection that connects the function block I/O terminal
to the process I/O such as analog I/O and contact I/O

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

10

Terminal Connection
The terminal connection specifies the I/O terminal of a function
as the connection destination of the function block I/O terminal.
The connection between I/O terminal of function are well applied
to the cascade loops where the upper stream block output depends
on the lower stream block status.
The terminal connection is mainly used in the following instances.
Connection Between Function Blocks
The output terminal (OUT) of the upstream function block and setting
input terminal (SET) or input terminal (IN) of the downstream function
block are connected under the cascade control.
Connection by Way of a Switch Block (SW-33, SW-91)
Terminal connection must always be used as the I/O connection method at
one the other of the I/O terminal (input side or output side) of the SW-33
or SW-91 block.

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

Connection Between Function Blocks

Terminal
Terminal connection
connection

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

11

Connection by Way of a Switch Block

SWSW-33 & SWSW-91
Terminal
Terminal connection
connection

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

REGULATORY CONTROL BLOCK

The regulatory control blocks are the function block perform control
computation processing mainly on the analog input as input signals.
The calculated results are used for process monitor and process control.

The regulatory control blocks support the following types of processing :

input processing, control computation processing, output processing and
alarm processing.

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

12

PID Controller Block (PID)

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

PID Controller Block (PID)

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

13

PID Controller Block (PID)

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

There are 4 processing function

1.Input Processing
Receives a signal from the input terminal and output a process variable (PV).
2.Control Computation Processing
Performs control computation processing by reading the PV and output a manipulated variable (MV)
3.Output Processing
Reads the MV and output the result of control computation processing to the output terminal as an output
signal.
4.Alarm Processing
Detects an abnormality in the PV or MV and notifies the operation and monitoring function.
Instrumentation & Automation Education Center (IAEC)
Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

14

Input Indicator Block (PVI)

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

Input Indicator Block (PVI)

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

15

Manual Loader Block (MLD)

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

Manual Loader Block (MLD)

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

16

Manual Loader Block (MLD)

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

EXAMPLE

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

17

EXAMPLE

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

EXAMPLE

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

18

Note..

Instrumentation & Automation Education Center (IAEC)

Yokogawa (Thailand) Ltd.

Professional Instrument Engineer Training Program

CS3000 Engineering Training Course

19