8086 Interview Questions TechInterviews - Com
8086 Interview Questions TechInterviews - Com
com
Full-text search:
1. What are the flags in 8086? - In 8086 Carry flag, Parity flag, Auxiliary carry flag, Zero flag,
Overflow flag, Trace flag, Interrupt flag, Direction flag, and Sign flag.
Search
Categories:
General (32)
C++ (24)
Java (44)
Networking (16)
Windows (20)
Unix/Linux (9)
VB (7)
.NET (28)
Hardware (14)
Database (24)
Testing (11)
Web dev (8)
Submit yours
Site sponsors:
E-mail updates:
2. What are the various interrupts in 8086? - Maskable interrupts, Non-Maskable interrupts.
3. What is meant by Maskable interrupts? - An interrupt that can be turned off by the programmer
is known as Maskable interrupt.
4. What is Non-Maskable interrupts? - An interrupt which can be never be turned off (ie.disabled)
is known as Non-Maskable interrupt.
5. Which interrupts are generally used for critical events? - Non-Maskable interrupts are used in
critical events. Such as Power failure, Emergency, Shut off etc.,
6. Give examples for Maskable interrupts? - RST 7.5, RST6.5, RST5.5 are Maskable interrupts
7. Give example for Non-Maskable interrupts? - Trap is known as Non-Maskable interrupts, which
is used in emergency condition.
8. What is the Maximum clock frequency in 8086? - 5 Mhz is the Maximum clock frequency in
8086.
9. What are the various segment registers in 8086? - Code, Data, Stack, Extra Segment registers
in 8086.
10. Which Stack is used in 8086? - FIFO (First In First Out) stack is used in 8086.In this type of Stack
the first stored information is retrieved first.
11. What are the address lines for the software interrupts? RST 0
0000 H
RST1
0008 H
RST2
0010 H
RST3
0018 H
RST4
0020 H
RST5
0028 H
RST6
0030 H
email@server
Subscribe
We give away programming
books to e-mail subscribers
Miscellaneous stuff:
Take a survey, earn money. Get $5
for sign-up.
2.4 Gigs of storage with 120 GB of
bandwidth monthly - great hosting
for $7.95 a month
International phone cards, cheap
rates
Satelite TV - have satelite television
installed at your house with directv.
Rubber Stamp - Shop for custom
self-inking stamps, hand stamps,
address stamps, label stamps, check
endorsement stamps, check deposit
stamps, date stamps, pre inks,
pocket stamps, ink and much more!
Golden Palace Casino
Get a $400 bankroll for $100.
CASINO BONUS INDEX
List of the best online casino
bonuses
UK Great Casinos
900 Free Chips. Top Payouts plus
Guide
RST7
0038 H
12. What is SIM and RIM instructions? - SIM is Set Interrupt Mask. Used to mask the hardware
interrupts. RIM is Read Interrupt Mask. Used to check whether the interrupt is Masked or not.
13. Which is the tool used to connect the user and the computer? - Interpreter is the tool used to
connect the user and the tool.
14. What is the position of the Stack Pointer after the PUSH instruction? - The address line is
02 less than the earlier value.
15. What is the position of the Stack Pointer after the POP instruction? - The address line is 02
greater than the earlier value.
16. Logic calculations are done in which type of registers? - Accumulator is the register in which
Arithmetic and Logic calculations are done.
17. What are the different functional units in 8086? - Bus Interface Unit and Execution unit, are
the two different functional units in 8086.
18. Give examples for Micro controller? - Z80, Intel MSC51 &96, Motorola are the best examples of
Microcontroller.
19. What is meant by cross-compiler? - A program runs on one machine and executes on another is
called as cross-compiler.
20. What are the address lines for the hardware interrupts? RST 7.5
003C H
RST 6.5
0034 H
RST 5.5
002C H
TRAP
0024 H
21. Which Segment is used to store interrupt and subroutine return address registers? - Stack
Segment in segment register is used to store interrupt and subroutine return address registers.
22. Which Flags can be set or reset by the programmer and also used to control the
operation of the processor? - Trace Flag, Interrupt Flag, Direction Flag.
23. What does EU do? - Execution Unit receives program instruction codes and data from BIU,
executes these instructions and store the result in general registers.
24. Which microprocessor accepts the program written for 8086 without any changes? - 8088
is that processor.
25. What is the difference between 8086 and 8088? - The BIU in 8088 is 8-bit data bus & 16- bit
in 8086.Instruction queue is 4 byte long in 8088and 6 byte in 8086.
more interview questions - all Hardware interview questions
All requests for answers will be deleted. If we don't publish answers, it's because we don't have
them.
Any personal attacks, obscenities and inappropriate comments will be deleted.
All the spam will be deleted.
2 Comments
1. in 8086
itd not fifo for stack its lifo
Good links:
Deals on PCs
Free books
IT Research
http://www.sellsbrothers.com/
RSS feed for comments on this post. TrackBack URI
fun/msiview/
http://weblogs.asp.net/
Leave a comment
JobsBlog/
C# FAQ
MSDN C# FAQ
Name (required)
Everything Firebird
Cheat sheets
Mail (will not be published) (required)
That was funny
Collector cars
Website
ASP Free
Search Meteus
Search
XML:
RDF
RSS 2.0
RSS 0.92
Atom
Comments
Submit Comment