Scribd
Upload
1K views

Earthquake Resistant Design of Structures PDF

This document outlines the course objectives, outcomes, and units of study for an elective course on Earthquake Resistant Design of Structures. The course aims to develop understanding of single and multi-degree of freedom structural systems, earthquake causes and effects, and seismic design codes. Key topics covered include structural dynamics, vibration analysis, engineering seismology, Indian code provisions for seismic-resistant design and detailing of buildings, and aseismic planning considerations. Assessment includes analyzing structural systems and designing earthquake-resistant buildings.

Uploaded by

Praveen Jain
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
1K views

Earthquake Resistant Design of Structures PDF

This document outlines the course objectives, outcomes, and units of study for an elective course on Earthquake Resistant Design of Structures. The course aims to develop understanding of single and multi-degree of freedom structural systems, earthquake causes and effects, and seismic design codes. Key topics covered include structural dynamics, vibration analysis, engineering seismology, Indian code provisions for seismic-resistant design and detailing of buildings, and aseismic planning considerations. Assessment includes analyzing structural systems and designing earthquake-resistant buildings.

Uploaded by

Praveen Jain
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

139

EARTHQUAKE RESISTANT
DESIGN OF STRUCTURES
(ELECTIVE-I)

Course Code: 13CE1130

L
4

T
0

P
0

C
3

Course Educational Objectives:

To create a strong understanding on application of single degree


and multi-degree of freedom systems.

To impart the knowledge on causes and effects of earthquakes.

To familiarize with seismic codal and detailing provisions.

Course Outcomes:

Students acquire the ability to analyze single and multi-degrees of


freedom system of structures.

The student will demonstrate the ability to design earthquake-resistant


structures.

UNIT-I

(10 Lectures)

INTRODUCTION TO STRUCTURAL DYNAMICS :

Theory of vibrations Lumped mass and continuous mass systems


Single Degree of Freedom (SDOF) Systems Formulation of equations
of motion Un damped and damped free vibration Damped Force
vibrations Response to harmonic excitation Concept of response
spectrum.
UNIT-II

(12 Lectures)

MULTI-DEGREES OF FREEDOM (MDOF) SYSTEMS (LIMITED TO 2


DOF):

Formulation of equations of motion Free vibration Determination of


natural frequencies of vibration and mode shapes Orthogonal properties
of normal modes Mode superposition method of obtaining response.
G V P College of Engineering (Autonomous)

2013

140

UNIT-III

(12 Lectures)

EARTHQUAKE ENGINEERING :

Engineering Seismology Earthquake phenomenon Causes and effects


of earthquakes Faults Structure of earth Plate Tectonics Elastic
Rebound Theory Earthquake Terminology Source, Focus, Epicenter
etc Earthquake size Magnitude and intensity of earthquakes
Classification of earthquakes Seismic waves Seismic zones Seismic
Zoning Map of India Seismograms and Accelerograms.
UNIT-IV

(14 Lectures)

CODAL DESIGN PROVISIONS :

Review of the latest Indian seismic code IS:1893 2002 (Part-I) provisions
for buildings Earthquake design philosophy Assumptions Analysis
by seismic coefficient and response spectrum methods Displacements
and drift requirements Provisions for torsion Analysis of a multistoried
building using Seismic Coefficient method.
CODAL DETAILING PROVISIONS:

Review of the latest Indian codes IS: 4326 and IS: 13920 Provisions
for ductile detailing of R.C buildings Beam, column and joints.
UNIT-V

(14 Lectures)

ASEISMIC PLANNING :

Plan Configurations Torsion Irregularities Re-entrant corners Nonparallel systems Diaphragm Discontinuity Vertical Discontinuities in
load path Irregularity in strength and stiffness Mass Irregularities
Vertical Geometric Irregularity Proximity of Adjacent Buildings.
SHEAR WALLS:

Types Design of Shear walls as per IS: 13920 Detailing of


reinforcements.
TEXT BOOKS:
1.
Mario Paz, Structural Dynamics - Theory and
Computations, 6th Edition, Pearson Education, 2005.
2.
Pankaj Agarwal & Manish Shrikhande, Earthquake Resistant
Design of Structures, 5th Edition, Prentice Hall of India, New
Delhi, 2009.
G V P College of Engineering (Autonomous)

2013

141

3.

Jai Krishna A.R, Chandrasekharan A.R, Brijesh Chandra,


Elements of Earthquake Engineering, 2nd Edition, South
Asian Publishers, New Delhi, 2001.

REFERENCES:
1.
Chopra A.K., Dynamics of Structures, 5th Edition, Pearson
Education, Indian Branch, Delhi, 2007.
2.
Clough & Penzien, Dynamics of Structures, 4th Edition,
McGraw Hill, International Edition, 2008.
3.
S.K.Duggal, Earth Quake Resistant Design of Structures,
Oxford university Press, 1st Edition, 2012.
4.
IS Codes: IS: 1893, IS: 4326 and IS:13920, Bureau of Indian
Standards, New Delhi.
pqr

G V P College of Engineering (Autonomous)

2013

You might also like