Scribd
Upload
235 views

Cant Slab

This document contains calculations for the analysis and design of a reinforced concrete beam. It includes load and support conditions, material properties, section details, analysis results, and design checks for bending moment resistance, shear resistance, and reinforcement spacing. The beam has a rectangular cross-section of 350mm depth and 1000mm width. It is designed to resist a maximum bending moment of -83kNm and maximum shear force of 46kN under the given load combinations. Reinforcement and shear link details are provided to satisfy design requirements.

Uploaded by

insane88
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
235 views

Cant Slab

This document contains calculations for the analysis and design of a reinforced concrete beam. It includes load and support conditions, material properties, section details, analysis results, and design checks for bending moment resistance, shear resistance, and reinforcement spacing. The beam has a rectangular cross-section of 350mm depth and 1000mm width. It is designed to resist a maximum bending moment of -83kNm and maximum shear force of 46kN under the given load combinations. Reinforcement and shear link details are provided to satisfy design requirements.

Uploaded by

insane88
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Project

Job no.

Calcs for

Start page no./Revision

1
Calcs by

Calcs date

Checked by

Checked date

Approved by

Approved date

23-Jul-15

RC BEAM ANALYSIS & DESIGN BS8110


TEDDS calculation version 2.1.12

Load Envelope - Com bination 1


12.759

0.0
mm

3600
1

kNm
-82.680

Bending Mom ent Envelope


-82.7

0.0
mm

3600
1

kN
45.933

Shear Force Envelope


45.9

0.0
mm

3600
1

Support conditions
Support A

Vertically restrained
Rotationally restrained

Support B

Vertically free
Rotationally free

Applied loading
Dead self weight of beam 1
Dead full UDL 4.35 kN/m
Load combinations
Load combination 1

Support A

Dead 1.00
Imposed 1.00

Span 1

Dead 1.00
Imposed 1.00

Support B

Dead 1.00
Imposed 1.00

Project

Job no.

Calcs for

Start page no./Revision

2
Calcs by

Calcs date

Checked by

Checked date

Approved by

23-Jul-15

Analysis results
Maximum moment support A;

MA_max = -83 kNm;

MA_red = -83 kNm;

Maximum moment span 1 at support;

Ms1_max = 0 kNm;

Ms1_red = 0 kNm;

Maximum moment support B;

MB_max = 0 kNm;

MB_red = 0 kNm;

Maximum shear support A;

VA_max = 46 kN;

VA_red = 46 kN

Maximum shear support A span 1 at 300 mm;

VA_s1_max = 42 kN;

VA_s1_red = 42 kN

Maximum shear support B;

VB_max = 0 kN;

VB_red = 0 kN

Maximum shear support B span 1 at 3300 mm;

VB_s1_max = 4 kN;

VB_s1_red = 4 kN

Maximum reaction at support A;

RA = 46 kN

Unfactored dead load reaction at support A;

RA_Dead = 46 kN

Maximum reaction at support B;

RB = 0 kN

Unfactored dead load reaction at support B;

RB_Dead = 0 kN

Rectangular section details


b = 1000 mm

Section depth;

h = 350 mm

350

Section width;

1000

Concrete details
Concrete strength class;

C30/37

Characteristic compressive cube strength;

fcu = 37 N/mm2

Modulus of elasticity of concrete;

Ec = 20kN/mm2 + 200 fcu = 27400 N/mm2

Maximum aggregate size;

hagg = 20 mm

Reinforcement details
Characteristic yield strength of reinforcement;

fy = 500 N/mm2

Characteristic yield strength of shear reinforcement; fyv = 500 N/mm2


Nominal cover to reinforcement
Nominal cover to top reinforcement;

cnom_t = 35 mm

Nominal cover to bottom reinforcement;

cnom_b = 35 mm

Nominal cover to side reinforcement;

cnom_s = 35 mm

Mid span 1

Approved date

Project

Job no.

Calcs for

Start page no./Revision

3
Calcs by

Calcs date

Checked by

Checked date

Approved by

Approved date

23-Jul-15

350

6 x 20 bars
2 x 10 shear legs at 150 c/c
2 x 20 bars

1000

Design moment resistance of rectangular section (cl. 3.4.4) - Negative moment


Design bending moment;

M = abs(Ms1_neg) = 47 kNm

Depth to tension reinforcement;

d = h - cnom_t - v - top / 2 = 295 mm

Redistribution ratio;

b = min(1 - mrs1, 1) = 1.000


K = M / (b d2 fcu) = 0.014
K' = 0.156
K' > K - No compression reinforcement is required

Lever arm;

z = min(d (0.5 + (0.25 - K / 0.9)0.5), 0.95 d) = 280 mm

Depth of neutral axis;

x = (d - z) / 0.45 = 33 mm

Area of tension reinforcement required;

As,req = M / (0.87 fy z) = 381 mm2

Tension reinforcement provided;

6 20 bars

Area of tension reinforcement provided;

As,prov = 1885 mm2

Minimum area of reinforcement;

As,min = 0.0013 b h = 455 mm2

Maximum area of reinforcement;

As,max = 0.04 b h = 14000 mm2

PASS - Area of reinforcement provided is greater than area of reinforcement required


Rectangular section in shear
Shear reinforcement provided;

2 10 legs at 150 c/c

Area of shear reinforcement provided;

Asv,prov = 1047 mm2/m

Minimum area of shear reinforcement (Table 3.7);

Asv,min = 0.4N/mm2 b / (0.87 fyv) = 920 mm2/m

PASS - Area of shear reinforcement provided exceeds minimum required


Maximum longitudinal spacing (cl. 3.4.5.5);

svl,max = 0.75 d = 221 mm

PASS - Longitudinal spacing of shear reinforcement provided is less than maximum


Design concrete shear stress;

vc = 0.79N/mm2 min(3,[100 As,prov / (b d)]1/3) max(1, (400mm


/d)1/4) (min(fcu, 40N/mm2) / 25N/mm2)1/3 / m = 0.669 N/mm2

Design shear resistance provided;

vs,prov = Asv,prov 0.87 fyv / b = 0.456 N/mm2

Design shear stress provided;

vprov = vs,prov + vc = 1.125 N/mm2

Design shear resistance;

Vprov = vprov (b d) = 331.9 kN

Shear links provided valid between 0 mm and 3600 mm with tension reinforcement of 1885 mm2
Spacing of reinforcement (cl 3.12.11)
Actual distance between bars in tension;

s = (b - 2 (cnom_s + v + top/2)) /(Ntop - 1) - top = 158 mm

Minimum distance between bars in tension (cl 3.12.11.1)


Minimum distance between bars in tension;

smin = hagg + 5 mm = 25 mm
PASS - Satisfies the minimum spacing criteria

Maximum distance between bars in tension (cl 3.12.11.2)


Design service stress;

fs = (2 fy As,req) / (3 As,prov b) = 67.5 N/mm2

Maximum distance between bars in tension;

smax = min(47000 N/mm / fs, 300 mm) = 300 mm

Project

Job no.

Calcs for

Start page no./Revision

4
Calcs by

Calcs date

Checked by

Checked date

Approved by

Approved date

23-Jul-15
PASS - Satisfies the maximum spacing criteria

You might also like