Controls

Multi-Controls with Joystick

USB MIDI controller

N16549

Controls

Important Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufactures
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Only use attachments/accessories specified by the manufacturer.

Contents

Features

Front Panel Layout

Side Panel Layout

Getting Started
Connecting your iControls system
Controller Features and Settings
Faders
Control Buttons
Knobs
Joystick
MIDI Machine Control (MMC) buttons

4
4
4
4
5
5
5

Installing iMapTM Software for Mac OSX

6-7

Installing iMapTM Software for Windows

8-9

Assigning MIDI functions with iMapTM

10

iMapTM iControls software panel

10-12

Restore the factory default settings

12

Daisy Chain with iControls or any i-series controllers

13

Specifications

14

Appendix A
General MIDI Controller Numbers (MIDI CC'S)

15

Services

16

Controls

Introduction
What's in the package

Introduction

Controls

Thank you for purchasing the ICON iControls USB MIDI controller. We sincerely
trust this product will provide years of satisfactory service, but if anything is not to
your complete satisfaction, we will endeavor to make things right.
In these pages, you'll find a detailed description of the features of the iControls,
as well as a guided tour through its front and side panels, step-by-step
instructions for its setup and use, and full specifications.
You'll also find a warranty card enclosed. Please don't forget to fill it out and mail
it so that you can receive online technical support at: www.icon-global.com. And
so we can send you updated information about these and other ICON products in
the future. As with most electronic devices, we strongly recommend you retain
the original packaging. In the unlikely event the product must be returned for
servicing, the original packaging (or reasonable equivalent) is required.
With proper care and adequate air circulation, your iControls will operate without
any trouble for many years. We recommend that you record your serial number
in the space provided below for future reference.

Please write your serial number here for future reference:

Purchased at:

Date of purchase:

What's in the package?

iControls USB MIDI controller x 1
Software CD x 1
Quick Start Guide

Layer

e1

e2

e3

e4

e5

e6

e7

e8

e9

f1

f2

f3

f4

f5

f6

f7

f8

f9

Controls

USB2.0 Cable
com
lobal.
con-g
www.i

Ma

for

e Con
Mak

CUBE

p6

p5

CUBE

p12

p11

p10

p9

f9

p8

Roll

f8

e7

Hold

or

p7
Artist

pute

f7

e6
f6

e5
f5

e4
f4

e3
f1

f2

f1

in Pack

2
3

Layer
-

Controls

oller
Contr
MIDI
rols

/ iCont
/ iPad
iKey
Note:

MAC

on

on

Setu iMa
with
8

you

PC Turn

USB

ct your.
e
conne stage
not this
war
e do ller at
TM soft
pleascontro
p
s
Note:
iMa
2
i-serie
all

r Mac

you

Turn

Inst

ct your.
e
conne stage
war
not this
e do ller at
TM soft
pleascontro
p
s
iMa
Note:
2
i-serie
all

r com

f3

e2

e1

1
+

e9

e8

Flam

ack

Unp

Inst
1

Note:

m, in
s
the
CD-Ro
start
your appear
into icon to
CD CD icon
the tion the
Insert installa ; click
an
wizard
desktop
install

USB2
USB1
1394

a
is
which to
cable port
port
USB USB
s
the PC's USB
tion
ect your ller's
e
Conn froms contro
I func
ed
war
MID
i-serie
pe).
the TM soft

provid
your
b
(B-Ty
is
which
port
cableUSB port
USB
s
USB
the Mac'sller's
tion
ect your
Conn from s contro
I func e
ed i-serie
Note:
MID softwar
providyour pe).
TM
to
10
p the p
(B-Ty

Pad

tion

nec

e Con
Mak

key

Pitch
Mod

or

Octave

nec

Series
Sustain

tion

dow

Win

c&

ide

rt Gu

Sta

ick

Qu

p
p
Setu iMa
with

10

gs
are
settin
TM softw e
have your
iMap e whosyou d it to Data"
m
h the devict. After uploa "Send
l.co
Launc e theadjus gs,with the
oba
to settin
ller
Note: choos
n-gl
and wishted the
.ico
you
s contro
adjus
.
www
i-serie
button

and
are gs youted
s .
TM softw
settin adjus
iMap e have i-serie
button
whosyou your
h the e
to Data"
devict. After d it
Launc
"Send
the
Note: e to adjusgs, uploathe
choos
with
wish settinller
the
contro

PD3AV100

ICPK

Features

Layer

e1

e2

e3

e4

e5

e6

e7

e8

e9

f1

f2

f3

f4

f5

f6

f7

f8

f9

Controls

Main features include:

Extremely compact and designed to match the MacBookTM

Controls

9 assignable faders 18 assignable buttons

9 assignable rotary knobs for setting MIDI CC
Joystick for control
"Layer" buttons for customizing 4 scenes for instant control of multiple
applications
6 transport buttons
2xUSB Connectors for daisy chain with any i-series controllers
Class-compliant with Windows XP, Vista (32 bit), and Mac OS X
USB bus-powered
iMapTM software included for easy mapping of MIDI functions.
An aluminum cover, in different graphic designs and colors, is available
as an option.

Front Panel Layout

2

5
-

Controls

Layer

e1

e2

e3

e4

e5

e6

e7

e8

e9

f1

f2

f3

f4

f5

f6

f7

f8

f9

Controls

4
3

Faders
These nine programmable faders slide up and down to adjust linear
MIDI parameters such as volume.

Knobs
These nine programmable knobs allow to adjust linear MIDI parameters
such as Pan.

Control Buttons
These eighteen programmable buttons, set in nine groups of two,
allow you to activate or control the features of your DAW or the
music software that you are using.

Joystick
This joystick works as a mouse pad on your notebook computer.

Transport Buttons (MMC)

iControls has dedicated MIDI Machine Control (MMC) buttons on
the front panel.

Layer Buttons
These two buttons allow you to switch between the four layers.
Each layer can be set to different parameters for the faders and
other knobs .

Side Panel Layout

USB port (B-Type)

Functions as a MIDI port to your notebook (or computer) and
compatible software. Also provides power to your iControls.

USB port
Use to daisy chain with the second unit of iControls or any i-series
controllers such as iKey or iPad.

Getting Started
Connecting your iControls controller system
1

Connect the iControls to your Mac/PC via the USB port.

Controls

Choose a USB port on your Mac/PC and insert the wide (flat) end of
the USB cable. Connect the cable's small jack end to the iControls. Your
Mac/PC should automatically "see" the new hardware and notify you
that it is ready to use.

a
b
1394

USB1 USB2

Diagram 1
2

Diagram 2

Assign the MIDI messages to iControls

Refer to page 10 for "Assign the MIDI functions with "iMapTM"
software"

Controller Features and Settings

Learning how to effectively and creatively use the functions on your
iControls is simple.

Layer

e1

e2

e3

e4

e5

e6

e7

e8

e9

f1

f2

f3

f4

f5

f6

f7

f8

f9

Controls

Faders
There are nine faders on iControls. Fader 9 is the generally-accepted
control for volume. You can assign any one of 119 different MIDI CC
numbers to any fader, although we recommend keeping Fader 9 set to
volume (CC07), for volume control. CC numbers 120 to 127 are nonlinear parameters, and cannot be controlled by a linear fader.

Control Buttons
There are eighteen control buttons. You can assign different CC
numbers as well as MIDI channel to any button.
4

Knobs

Controls

There are nine knobs on iControls. Any linear CC number can be

assigned to any knob, as well as any individual channels 1-16.
Michael says, "Think about how fine or smooth a control technique
you will need to use, and then decide whether to use a knob or a
fader for that function. Your fader chops may be smoother, or a knob,
with its slow rotary action, might be more suitable."

Joystick
You may use this joystick as your computer mouse to control the
computer pointer.

MIDI Machine Control (MMC) buttons

MIDI Machine Control (MMC) messages are used by some devices and
software to simulate the controls that any analog tape recorder would
have, such as Stop, Play, and Record. Not all software/hardware will
respond to MMC messages, so look for the section on this topic in the
manual for whatever software or hardware device you are using with
iControls. It will tell you what functions can be operated with the MMC
buttons on iControls.
The MMC message is a SysEx message. The device ID for iControls
is 127, the standard MIDI default. Your software/hardware can be
configured to accept this device ID, if it does not already recognize the
default 127 value. The CC numbers for these controls are
<< - rewind = 05
>> - fast forward = 04
- stop = 01
> -play = 02
- record = 06

Installing iMapTM Software for MAC OSX

Please follow the procedures below step-by-step to install your iMapTM
software to Mac OS X
Turn on your MAC.

Insert the Utility CD in your CD-Rom

After you have inserted the CD into
your CD-Rom, an installation CD icon
should appear in desktop; click the
icon to start the install wizard

Diagram 1
3

Setup Wizard appear

Setup wizard appears, please click
"Continue"

Controls

Diagram 2
4

Choose Install Location

Select a destination to install
iMapTM software to Mac OS X,
then click "Continue"

Diagram 3
5

Change Install Location

If you want to change install
location, please click "Change
Install Location" button and
select another location or just
click "Install" button to continue.

Diagram 4

Installing iMapTM Software for MAC OSX(continues)

Controls

Input Administrator information

To install iMapTM software, you need
to input administrator user
information, please input the name
and password of administrator then
click "Install" to continue.
Diagram 5

Installation finished
Click "Close" to complete the
iMapTM software installation.

Diagram 6

Installing iMapTM Software for Windows

Please follow the procedures below step-by-step to install your iMapTM
software.
Turn on your PC.

Insert the Utility CD in your CD-Rom

After you have inserted the CD into
your CD-Rom, an installation screen
should appear as shown in diagram
1; click "iMapTM installation".
(Note: If the installation screen not
appear automatically go to the CD
folder and double click on "Setup")
Diagram 1

Setup Wizard appear

Setup wizard appears, please click
"Next"

Controls

Diagram 2
4

Choose Install Location

Choose your preferred install
location for iMapTM or use the
default location and click "Next"

Diagram 3
5

Select shortcut
Select the start menu folder in
which you would like to create
TM
the iMap shortcut. Then click
"Next"

Diagram 4

Installing iMapTM Mapping Software for Windows(continues)

Controls

Create a shortcut on your desktop

Please untick the box if you do
not want to place a shortcut icon
on your desktop for iMapTM,
otherwise click "Next"

Diagram 5
7

TM

iMap started to install

The iMapTM installation has now
started, wait for it to finish. Then
click "Finish"

Diagram 6
8

Installation finished
Click "Finish" to complete the
iMapTM software installation.

Diagram 7

Assigning MIDI functions with iMapTM

Diagram 1

Note: If your iControls is not connected to

your Mac/PC, a message of "There are no
MIDI input devices" will appear. Please
connect iControls to your Mac/PC with
the provided USB cable.
Diagram 2

Controls

You can use iMapTM to assign the

MIDI functions of your iControls easily.
Please launch the iMapTM software,
a device selector screen will appear
as shown in diagram 1. Then click
the "iControls" button.

TM

iMap iControls software panel

(1/3/5/8) (2/4/6/9)

10 11

12

13

Assign the MIDI channels to the fader

Select your desired MIDI channel from 1-16 for the fader

Assign the CC number to the fader

Select your desired CC number from 0-127 in the pull-down menu for
the fader.

Assign the MIDI channels to the control buttons

Select your desired MIDI channel from 1-16 for the control button

Assign the CC number to the control button

Select your desired CC number from 0-127 in the pull-down menu for
the control button.
10

Controls

iMapTM iControls software panel(continues)

(1/3/5/8) (2/4/6/9)

10 11

12

13

Assign the MIDI channels to the knob

Select your desired MIDI channel from 1-16 for the knob

Assign the CC number to the knob

Select your desired CC number from 0-127 in the pull-down menu for
the knob.

Select the 4 different Layers and choose the desired settings for
each layer
You may have 4 different "Layers" for different applications. Each
"Layer" can have its own control settings.

Assign the MIDI channels to the MMC buttons

Select your desired MIDI channel from 1-16 for the MMC buttons

Assign the CC number to the MMC buttons

Depending on your DAW or music software, assign a CC number to
these buttons according to your software.
(Note: We have created a series of templates for different software.
These are contained on the Utility CD. Simply import the correspondence
template file into your DAW and these buttons will function as MMC right
away.)

11

10

"Save file" button

Click this button to save your current settings for the iControls. The file is
an ".icon" file.

11

"Load file" button

Click this button to load a previously saved ".icon" setting file for
your iControls.

iMapTM iControls software panel(continues)

(1/3/5/8) (2/4/6/9)

12

10 11

12

13

Controls

"Send Data" button

TM
Click this button to upload the iMap software settings to your iKey
via USB connection.
(Note: You must have connected your iControls to your Mac/PC,
otherwise the settings upload will not be successful.)

13

"MIDI Devices" button

Click this button, a MIDI device select window
will appear as shown in diagram 1. Please
select "ICON iControls" for the MIDI Out Devices.

Diagram 1

Restore the factory default settings

By holding down the buttons "Rewind
", "Play " and
"FastForward " together, the settings of the iControls will return
to its factory default condition.

12

Daisy Chain with iControls or any i-series controllers

Controls

You may daisy chain up to 3 units of iControls or any i-series controllers.

1

Connect the first unit of iControls to your Mac/PC via the USB port.
Choose a USB port on your Mac/PC and insert the wide (flat) end of
the USB cable and the other small end (B-type USB pack) to iControls.

Connect the next units of iControls (or iKey/iPad)

Insert the wide (flat) end of the USB cable to the first unit of iControls's
second USB port and the other small end (B-type USB jack) to the
second unit iControls's USB port. By following the same procedure,
you may daisy chain with the 3rd unit of iControls (or iKey/iPad).

Sustain

key

Octave

Mod

Pitch

USB2.0 Cable

Pad

Flam

Artist

Hold

Roll

p7

f1

p8

p
10

p9

p5

p6

p
11

p
12

USB2.0 Cable

Layer

Controls

13

e1

e2

e3

e4

e5

e6

e7

e8

e9

f1

f2

f3

f4

f5

f6

f7

f8

f9

Specifications
Connector:

To computer
USB connector (mini B type)
To i-series controller USB connector (standard type)
USB bus power

Current consumption:

100mA or less

Weight:

0.51kg (1.1lb)

Dimensions:

325(L) X 99(W) X 20(H)

12.78"(L) x 3.78"(W) x 0.75"(H)

Controls

Power supply:

14

Controls

Appendix A
General MIDI Controller Numbers (MIDI CC'S)

15

Services
If your iControls needs servicing, follow these instructions.
1. Ensure the problem is not related to operation error or external
system devices.

Controls

2.

Keep this owner's manual. We don't need it to repair the unit.

3.

Pack the unit in its original packaging including end card and box.
This is very important. If you have lost the packaging, please make
sure you have packed the unit properly. ICON is not responsible
for any damage that occurs due to non-factory packing.

4.

Ship to the ICON tech support center or the local return authorization.
U.S. OFFICE:
ICON Digital Corporation.
2222 Pleasant View Road,
Suite #1 Middleton,
WI 53562
Tel: 608-829-3450
Fax: 608-829-1972
[email protected]
ASIA OFFICE:
ICON International Digital Limited
Suite Nos. 7-10,
8th Floor, Sunley Centre,
No.9 Wing Yin Street,
Kwai Chun. N.T.
Hong Kong
Tel: 852-2398-2286
Fax: 852-2789-3947
[email protected]

For additional update information please visit our website at:

www.icon-global.com

16

www.icon-global.com
[email protected]

IC PD3V100-E