Scribd
Upload
55 views

Melt Flow Index Deluxe: Presto Stantest Private Limited

The Melt Flow Index Deluxe instrument is used to measure the melt flow index of thermoplastic materials. It has an electrically heated barrel, adjustable footrest, auto cut knife, and weights and plunger to extrude molten resins through an orifice. The temperature controller maintains the barrel temperature from ambient to 400°C with high precision. Additional features include a digital timer, automatic sample cutting, and standard accessories. The instrument is built on a sturdy metallic base and finished with a corrosion resistant coating. It provides measurements to international standards and comes with manuals, wiring diagrams, and calibration certification.

Uploaded by

Akhilesh Kumar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
55 views

Melt Flow Index Deluxe: Presto Stantest Private Limited

The Melt Flow Index Deluxe instrument is used to measure the melt flow index of thermoplastic materials. It has an electrically heated barrel, adjustable footrest, auto cut knife, and weights and plunger to extrude molten resins through an orifice. The temperature controller maintains the barrel temperature from ambient to 400°C with high precision. Additional features include a digital timer, automatic sample cutting, and standard accessories. The instrument is built on a sturdy metallic base and finished with a corrosion resistant coating. It provides measurements to international standards and comes with manuals, wiring diagrams, and calibration certification.

Uploaded by

Akhilesh Kumar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

30

YEARS
1983-2012

TIME T
ES

TED TESTING INSTRUMENTS

Melt Flow Index Deluxe


1. Electrical Panel

4
6

2. Powder Coated body


3. Adjustable footrest

4. Heated Barrel

5. Auto Cut knife

6. Weights & Plunger


3

Melt flow index of thermoplastic materials is defined as the rate of flow in grams per ten min. of extrudate of molten resins through a jet of a
specific length and diameter under prescribed condition of temperature, load and piston position in a cylindrical cavity inside a heated metallic
tube barrel at the time measurement is being made. Useful for checking flow properties of molten plastics / resin.
Temperature controller: Micro processor based PID controller with temperature range from ambient to 400C; resolution of 0.1C and
accuracy of 0.1C.
Timer: Digital pre-settable with a range up to 59 minutes; 59 seconds and having buzzer output.
Sample cutting: Automatic
* Standard accessories includes Orifice, Piston, Spoon, Spanner, Plumb Line, Funnel, Material charger, Mirror, Tweezer, Orifice cleaner, Barrel
cleaner, Sample cutter and Accessory stand.
The equipment is built on a rigid metallic base plate and finished in Autumn Gray & Blue combination painting and bright chrome / zinc plating to
give it a corrosion resistant finish.

Power: 230 Volts; 50 Hz; single phase.

The Instrument comes complete with Instruction Manual ,Electrical Wiring Diagram & Calibration Certificate traceable to NABL approved
Labs.
Technical Specifications :
Diameter of heater tube cavity
Dimensions of piston head
Dimensions of Die:
Weights

:
:
:
:

Electrical Requirement : Single Phase 220 V AC


9.55mm
Dimensions : 50 cm x 46 cm x 56 cm
9.47mm diameter
Approximate Weight : nett 46 Kg, Gross (Packed) : 56 Kg
2.095mm
1.2 kg; 2.16 kg; 3.8 kg; 5 kg & 10kg

Related Standards :
IS 2267-1972
IS 2530-1963
Is 10810-1984
ASTM D1238-1992

: Specification for polystyrene moulding materials


: Methods of test for polyethylene moulding Materials & polyethylene compounds
: Methods for test for cables part 23: melt flow Index
: Standard Test method for flow rates of Thermoplastic by extrusion plastometer

Optional Accessory : Lab Weighing Balance 200gms Least Count 0.01gms

OUR OTHER PRODUCTS :-

Tensile Testing Machine


Computerised

Head Office :

Tensile Testing Machine


Digital

Lab Heat Sealer

Melt Flow Index NXG

Hot Air Oven

Specific Gravity

Presto Stantest Private Limited


I-42A, DLF Industrial Area Phase-I, Delhi Mathura Road, Faridabad 121003, Haryana, India
P : +91 129 4272727 F : +91 129 4083111 E : [email protected]

Branches :

Mumbai
503 B, Fair link Centre, Opp. Fame Adlab
Behind Monginis Off Link Road
Andheri (West), Mumbai 400058
E : [email protected]

Kolkata
93, 3rd Floor, Karnani Estate
209, A.J.C. Bose Road
Kolkata-700017. West Bengal
E: [email protected]

www.prestogroup.com

Chennai
A-3,First Floor, Sri Sathya Sai Building
Chathurbhuja Road, Off Poonamallee High Road
Chennai- 600 010. Tamil Nadu
E: [email protected]

prestogroup 2012 / 13 we reserve the right to alter design / specification without notice.

Model : MFI - Dx

You might also like