Scribd
Upload
119 views4 pages

TMS320F206 BSDL

Archivo BSDL correspondiente al Procesador Digital de Señales TMS320F206 de TI

Uploaded by

Dan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
119 views4 pages

TMS320F206 BSDL

Archivo BSDL correspondiente al Procesador Digital de Señales TMS320F206 de TI

Uploaded by

Dan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 4

-------------------------------------------------------------------------------- TI TMS320F206 16-Bit 100-pin Fixed-Point DSP's

--------------------------------------------------------------------------------- Supported Devices: TMS320F206 100-pin PZ package


--------------------------------------------------------------------------------- Created by
: Texas Instruments Incorporated
--- Documentation : TMS320F206 Data Sheet (SPRS050)
--- BSDL revision : 0.1 - originally created (5/22/97)
--0.2 - additional comments added (BCTT 4/7/98)
--- BSDL status : Preliminary
--- Date created : 05/22/97
-----***************************************************************************---*
N O T I C E
*---*
*---* The 320C2xx/320F2xx family of processors do NOT support boundary
*---* scan. The test access port is included for emulation purposes
*---* but no boundary register is present on the devices. This file is
*---* provided to describe the implementation of the test access port to
*---* scan-based tools. This file and the '2xx family of devices are not *---* compliant with IEEE 1149.1 and will not support boundary scan
*---* functions other than BYPASS mode.
*---*
*---* This file will refer to the device as TMS320F206 although
*---* it is also valid for other 2xx devices.
*---*
*---***************************************************************************---***************************************************************************---*
W A R N I N G
*---*
*---*
This BSDL file has NOT been checked for correct syntax and semantics*---* using commercial tools, NOR has it been validated against
*---* the device. Without validation many structural errors could be
*---* present, leading to possible damage of the device when using its
*---* boundary scan logic.
*---*
*---***************************************************************************----IMPORTANT NOTICE
--- Texas Instruments Incorporated (TI) reserves the right to make changes --- to its products or to discontinue any semiconductor product or service --- without notice, and advises its customers to obtain the latest version --- of the relevant information to verify, before placing orders, that the --- information being relied on is current.
----- TI warrants performance of its semiconductor products and related
--- software to the specifications applicable at the time of sale in
--- accordance with TI's standard warranty. Testing and other quality control--- techniques are utilized to the extent TI deems necessary to support this --- warranty. Specific testing of all parameters of each device is not
--- necessarily performed, except those mandated by government requirements. ----- Certain applications using semiconductor devices may involve potential --- risks of death, personal injury, or severe property or environmental
--- damage ("Critical Applications").
----TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED,
--OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS,
--DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS.
----

-- Inclusion of TI products in such applications is understood to be fully --- at the risk of the customer. Use of TI products in such applications
--- requires the written approval of an appropriate TI officer. Questions --- concerning potential risk applications should be directed to TI through --- a local SC sales office.
----- In order to minimize risks associated with the customer's applications, --- adequate design and operating safeguards should be provided by the
--- customer to minimize inherent or procedural hazards.
----- TI assumes no liability for applications assistance, customer product
--- design, software performance, or infringement of patents or services
--- described herein. Nor does TI warrant or represent that any license,
--- either express or implied, is granted under any patent right, copyright, --- mask work right, or other intellectual property right of TI covering or --- relating to any combination, machine, or process in which such
--- semiconductor products or services might be or are used.
----Copyright (c) 1997, Texas Instruments Incorporated
-------------------------------------------------------------------------------entity TMS320F206 is
generic (PHYSICAL_PIN_MAP : string := "PZ");
port (D: linkage bit_vector(0 to 15);
A: linkage bit_vector(0 to 15);
PS_NEG: linkage bit;
DS_NEG: linkage bit;
IS_NEG: linkage bit;
READY: linkage bit;
R_W_NEG: linkage bit;
RD_NEG: linkage bit;
WE_NEG: linkage bit;
STRB_NEG: linkage bit;
BR_NEG: linkage bit;
HOLDA_NEG: linkage bit;
XF: linkage bit;
BIO_NEG: linkage bit;
IO: linkage bit_vector(1 to 4);
RS_NEG: linkage bit;
TEST: linkage bit;
MP_MC_NEG: linkage bit;
NMI_NEG: linkage bit;
HOLD_NEG_INT1_NEG: linkage bit;
INT2_NEG: linkage bit;
INT3_NEG: linkage bit;
TOUT: linkage bit;
CLKOUT1: linkage bit;
CLKIN_X2: linkage bit;
X1: linkage bit;
DIV: linkage bit_vector(1 to 2);
PLL5V: linkage bit;
CLKX: linkage bit;
CLKR: linkage bit;
FSR: linkage bit;
FSX: linkage bit;
DR: linkage bit;
DX: linkage bit;
TX: linkage bit;
RX: linkage bit;

TRST_NEG: in bit;
TCK: in bit;
TMS: in bit;
TDI: in bit;
TDO: out bit;
EMU0: linkage bit;
EMU1_OFF_NEG: linkage bit;
VCCP: linkage bit;
VDD: linkage bit_vector(1 to 8);
VSS: linkage bit_vector(1 to 14));
use STD_1149_1_1990.all; -- Get standard attributes and definitions
attribute PIN_MAP of TMS320F206 : entity is PHYSICAL_PIN_MAP;
constant PZ : PIN_MAP_STRING :=
" D:(22,23,24,26,27,28,29,31,32,33,34,36,38,39,40,41),
" A:(55,56,57,58,60,61,62,64,66,67,68,69,71,72,73,74),
" PS_NEG:53, DS_NEG:51, IS_NEG:52, READY:49, R_W_NEG:47,
" RD_NEG:45, WE_NEG:44, STRB_NEG:46, BR_NEG:43,
" HOLDA_NEG:6, XF:98, BIO_NEG:99, IO:(96,97,8,9),
" RS_NEG:100, TEST:1, MP_MC_NEG:2, NMI_NEG:17,
" HOLD_NEG_INT1_NEG:18, INT2_NEG:19, INT3_NEG:20,
" TOUT:92, CLKOUT1:15, CLKIN_X2:12, X1:13, DIV:(3,5),
" PLL5V:10, CLKX:87, CLKR:84, FSR:85, FSX:89,
" DR:86, DX:90, TX:93, RX:95, TRST_NEG:79, TCK:78,
" TMS:81, TDI:80, TDO:82, EMU0:76, EMU1_OFF_NEG:77,
" VCCP:11, VDD:(4,7,16,35,50,63,75,91),
" VSS:(14,21,25,30,37,42,48,54,59,65,70,83,88,94)
attribute
attribute
attribute
attribute
attribute

" &
" &
" &
" &
" &
" &
" &
" &
" &
" &
" &
" &
";

TAP_SCAN_IN of TDI : signal is true;


TAP_SCAN_MODE of TMS : signal is true;
TAP_SCAN_OUT of TDO : signal is true;
TAP_SCAN_RESET of TRST_NEG : signal is true;
TAP_SCAN_CLOCK of TCK : signal is (25.00e6, BOTH);

attribute INSTRUCTION_LENGTH of TMS320F206 : entity is 8;


attribute INSTRUCTION_OPCODE of TMS320F206 : entity is
"EXTEST
(00000000), " &
"BYPASS
(11111111), " &
"SAMPLE
(00000010), " &
"PRIVATE1 (00100000), " &
"PRIVATE2 (00100001), " &
"PRIVATE3 (00100010), " &
"PRIVATE4 (00100011), " &
"PRIVATE5 (00100100), " &
"PRIVATE6 (00100101), " &
"PRIVATE7 (00100110), " &
"PRIVATE8 (00100111), " &
"PRIVATE9 (00101000), " &
"PRIVATE10 (00101001), " &
"PRIVATE11 (00000011), " &
"PRIVATE12 (00000110) ";
attribute INSTRUCTION_CAPTURE of TMS320F206 : entity is "XXXXXX01";
attribute INSTRUCTION_PRIVATE of TMS320F206 : entity is
"PRIVATE1, PRIVATE2, PRIVATE3, PRIVATE4," &
"PRIVATE5, PRIVATE6, PRIVATE7, PRIVATE8," &
"PRIVATE9, PRIVATE10,PRIVATE11,PRIVATE12";

attribute BOUNDARY_CELLS of TMS320F206 : entity is


"BC_1";
attribute BOUNDARY_LENGTH of TMS320F206 : entity is 1;
attribute BOUNDARY_REGISTER of TMS320F206 : entity is
--- num cell
port
function safe
-"0 ( BC_1
,*
,internal, X )";
end TMS320F206;

You might also like