WCDMA RAN

CPC Feature Parameter Description

Issue

Draft A

Date

2014-01-20

HUAWEI TECHNOLOGIES CO., LTD.

Copyright Huawei Technologies Co., Ltd. 2014. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means without prior written
consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or representations
of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address:

Huawei Industrial Base

Bantian, Longgang
Shenzhen 518129
People's Republic of China

Website:

http://www.huawei.com

Email:

[email protected]

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

WCDMA RAN
CPC Feature Parameter Description

Contents

Contents
1 About This Document..................................................................................................................1
1.1 Scope..............................................................................................................................................................................1
1.2 Intended Audience..........................................................................................................................................................1
1.3 Change History...............................................................................................................................................................1

2 CPC-DTX/DRX...............................................................................................................................3
2.1 Overview........................................................................................................................................................................4
2.2 Basic Principle................................................................................................................................................................4
2.3 Radio Bearers.................................................................................................................................................................6
2.4 Transmission Pattern......................................................................................................................................................6
2.5 State Transition...............................................................................................................................................................7
2.6 Mobility Management....................................................................................................................................................7
2.7 Power Control.................................................................................................................................................................7
2.8 Load Control...................................................................................................................................................................8
2.9 HSDPA Scheduling Algorithm......................................................................................................................................8
2.10 Automatic Activation and Deactivation on NodeBs....................................................................................................8

3 CPC HS-SCCH Less Operation...................................................................................................9

3.1 Overview......................................................................................................................................................................10
3.2 Basic Principle..............................................................................................................................................................10
3.3 Radio Bearers...............................................................................................................................................................12
3.4 Mobility Management..................................................................................................................................................13

4 Related Features...........................................................................................................................14
4.1 WRFD-010686 CPC - DTX / DRX..............................................................................................................................14
4.1.1 Prerequisite Features..................................................................................................................................................14
4.1.2 Mutually Exclusive Features.....................................................................................................................................14
4.1.3 Impacted Features......................................................................................................................................................14
4.2 WRFD-010687 CPC-HS-SCCH Less operation..........................................................................................................15
4.2.1 Prerequisite Features..................................................................................................................................................15
4.2.2 Mutually Exclusive Features.....................................................................................................................................15
4.2.3 Impacted Features......................................................................................................................................................15

5 Network Impact...........................................................................................................................16
5.1 WRFD-010686 CPC - DTX / DRX..............................................................................................................................16
Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

ii

WCDMA RAN
CPC Feature Parameter Description

Contents

5.1.1 System Capacity........................................................................................................................................................16

5.1.2 Network Performance................................................................................................................................................16
5.2 WRFD-010687 CPC-HS-SCCH Less operation..........................................................................................................16
5.2.1 System Capacity........................................................................................................................................................16
5.2.2 Network Performance................................................................................................................................................17

6 Engineering Guidelines.............................................................................................................18
6.1 Deployment of CPC-DTX / DRX................................................................................................................................18
6.1.1 When to Use CPC-DTX / DRX.................................................................................................................................18
6.1.2 Information to Be Collected......................................................................................................................................19
6.1.3 Requirements.............................................................................................................................................................20
6.1.4 Activation..................................................................................................................................................................21
6.1.5 Activation Observation..............................................................................................................................................22
6.1.6 Deactivation...............................................................................................................................................................23
6.1.7 MML Command Examples.......................................................................................................................................23
6.1.8 Performance Monitoring............................................................................................................................................24
6.1.9 Parameter Optimization.............................................................................................................................................25
6.1.10 Troubleshooting.......................................................................................................................................................25
6.2 Deployment of CPC-HS-SCCH less operation............................................................................................................25
6.2.1 When to Use CPC-HS-SCCH less operation............................................................................................................26
6.2.2 Information to Be Collected......................................................................................................................................26
6.2.3 Requirements.............................................................................................................................................................26
6.2.4 Activation..................................................................................................................................................................27
6.2.5 Activation Observation..............................................................................................................................................28
6.2.6 Deactivation...............................................................................................................................................................28
6.2.7 MML Command Examples.......................................................................................................................................29
6.2.8 Performance Monitoring............................................................................................................................................29
6.2.9 Parameter Optimization.............................................................................................................................................29
6.2.10 Troubleshooting.......................................................................................................................................................29

7 Parameters.....................................................................................................................................30
8 Counters......................................................................................................................................177
9 Glossary.......................................................................................................................................179
10 Reference Documents.............................................................................................................180

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

iii

WCDMA RAN
CPC Feature Parameter Description

1 About This Document

About This Document

1.1 Scope
This document describes CPC, including its technical principles, related features, network
impact, and engineering guidelines.
This document covers the following features:
l

WRFD-010686 CPC - DTX / DRX

WRFD-010687 CPC - HS-SCCH less operation

1.2 Intended Audience

This document is intended for personnel who:
l

Need to understand the features described herein

Work with Huawei products

1.3 Change History

This section provides information about the changes in different document versions. There are
two types of changes, which are defined as follows:
l

Feature change
Changes in features of a specific product version

Editorial change
Changes in wording or addition of information that was not described in the earlier version

Draft A (2014-01-20)
Compared with Issue 04 (2013-12-30) of RAN15.0, Draft A (2014-01-20) of RAN16.0 includes
the following changes.
Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

WCDMA RAN
CPC Feature Parameter Description

1 About This Document

Change
Type

Change Description

Parameter Change

Feature
change

None

Changed the
RESERVED_SWITCH_5_BIT14 under
the RsvSwitch5 parameter in the SET
UALGORSVPARA command to the
CPC_OPT_FOR_RLSETUP_SWITCH
parameter in the SET
UALGORSVPARA command.

Editorial
change

None

None

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

WCDMA RAN
CPC Feature Parameter Description

2 CPC-DTX/DRX

CPC-DTX/DRX

This section describes the WRFD-010686 CPC-DTX / DRX feature.

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

WCDMA RAN
CPC Feature Parameter Description

2 CPC-DTX/DRX

2.1 Overview
DTX-DRX consists of the DTX (Discontinuous Transmission of the uplink DPCCH) and the
DRX (Discontinuous Reception of the downlink HS-SCCH). The feature of DTX-DRX allows
a UE to shut down its receiver and transmitter at a specific time and thus reduces the uplink
interference and UE power consumption.
The requirements of DTX-DRX are listed in Table 2-1.
Table 2-1 Requirements of DTX-DRX for NEs
Item

Requirement

CN

None

RNC

The RNC also needs to control the use of DTX-DRX during RB setup,
reconfiguration, and handover.
The RNC needs to support the configuration of the DTX-DRX transmission
pattern.

NodeB

The NodeB can configure, reconfigure, activate, and deactivate DTX or DRX.

UE

UEs must support CPC-DTX/DRX.

2.2 Basic Principle

Uplink DTX
The uplink DTX function allows a UE to automatically stop data transmission on the uplink
DPCCH when there is no data to transmit on the E-DCH and HS-DPCCH, thereby reducing
interference from the DPCCH. The UE periodically transmits DPCCH bursts in each DTX cycle
to maintain power control and link synchronization. For details about the conditions under which
a UE automatically stops data transmission on the uplink DPCCH, see section 6C.2
"Discontinuous uplink DPCCH transmission operation" in 3GPP TS 25.214 V9.0.0.
According to section 6C.2.1 "Uplink DPCCH burst pattern" in 3GPP TS 25.214 V9.0.0, if there
is data to transmit on the E-DCH, the data can be transmitted only at the time defined by Uplink
DPCCH burst pattern. As a result, the ping service delay is increased, and the web browsing
service delay is increased. The larger the web page, the longer the web browsing service delay.
Uplink DTX is of importance for services such as VoIP and web browsing, with intermittent
data transmission.
Figure 2-1 shows the impact of uplink DTX.

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

WCDMA RAN
CPC Feature Parameter Description

2 CPC-DTX/DRX

Figure 2-1 Impact of uplink DTX

Note that if the E-DCH data is transmitted continuously, the DPCCH has to be transmitted and
DTX becomes unavailable.
For details about the basic principle of uplink DTX, see section 6C.1 "Uplink CQI transmission"
in 3GPP TS 25.214 V9.0.0.

Downlink DRX
The UE in connected mode needs to listen to the control channel (HS-SCCH) continuously and
therefore power consumption is high. If downlink DRX is used, the UE needs to receive the HSSCCH only at some time points.
According to section 6C.3 "Discontinuous downlink reception" in 3GPP TS 25.214 V9.0.0, if
a UE has data to transmit, the UE can receive the data from the HS-SCCH only at the time
defined by HS-SCCH reception pattern. As a result, the ping service delay is increased, and the
web browsing service delay is increased. The larger the web page, the longer the web browsing
service delay.
Figure 2-2 shows the impact of downlink DRX.
Figure 2-2 Impact of downlink DRX

Downlink DRX depends on uplink DTX. Therefore, downlink DRX can be activated only after
uplink DTX is activated. Downlink DRX, together with uplink DTX, allows the UE to
periodically shut down the TX and RX function in the UE, lowering the UE battery consumption
and prolonging the UE battery life.
For details about the basic principle of downlink DRX, see section 6C.3 "Discontinuous
downlink reception" in 3GPP TS 25.214 V9.0.0.

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

WCDMA RAN
CPC Feature Parameter Description

2 CPC-DTX/DRX

HS-SCCH Order
In 3GPP release 7, HS-SCCH order is introduced and carried on HS-SCCH type 1 (non-MIMO
UEs) and HS-SCCH type 3 (MIMO UEs). Bit fields on HS-SCCH are fixed to a value to indicate
a specific HS-SCCH function.
After the RNC configure a UE with DTX-DRX, the NodeB can activate/deactivate DTX or DRX
respectively by sending HS-SCCH order to this UE.

2.3 Radio Bearers

CPC DTX-DRX is an optional feature. A prerequisite for using CPC is that HSDPA, HSUPA,
and SRB over HSPA are activated.
l

The DCH is not configured in the uplink and downlink. The E-DCH is configured in the
uplink, and the HS-DSCH and F-DPCH are configured in the downlink.

Signaling and data are carried on HSPA channels. Therefore, CPC is dependent on SRB
over HSDPA and SRB over HSUPA.

DTX/DRX can be selected if the following conditions are met:

l

DTX/DRX is supported by the network and the UE, and it is activated.

To activate DTX/DRX, select DTX_DRX of the HspaPlusSwitch parameter, and
CFG_HSPA_DTX_DRX_SWITCH of the CfgSwitch parameter.

The SRB is carried on HS-DSCH for the downlink and E-DCH for the uplink. For details,
see Radio Bearers Feature Parameter Description.

The service type is CS voice over HSPA service, PS voice service, PS streaming service,
or PS BE service.

The downlink HS-DSCH and uplink E-DCH are selected as transport channels.

2.4 Transmission Pattern

For details of the transmission pattern, see 3GPP TS 25.214.
There are two UE DTX cycles, namely cycle 1 and cycle 2. Generally, the UE uses cycle 1 for
uplink DTX. If the UE has no data to transmit for a long time, the UE uses cycle 2 for uplink
DTX. At the beginning of each cycle, the UE sends a DPCCH burst. One burst may consist of
one, two, or five subframes.
Figure 2-3 Switching between cycle 1 and cycle 2

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

WCDMA RAN
CPC Feature Parameter Description

2 CPC-DTX/DRX

Figure 2-3 shows the switching between the two UE DTX cycles. The operator can set cyclerelated information by using the RNC command SET UDTXDRXPARA for different services
to increase the system capacity while ensuring QoS. The parameters are listed as follows:
l

DtxCycle1

DtxCycle2

MacDtxCycle

InactThsForCycle2

DtxLongPreamble

MacInactiveThreshold

DpcchBurst1

DpcchBurst2

The operator can adjust the DRX cycles by using the RNC command SET
UDTXDRXPARA to meet the requirements of the UE. The parameters are listed as follows:
l

Drxvalid

DrxCycle

InactThsForDrxCycle

CQIFbCkinInDTXDRXmode

2.5 State Transition

State transition from CELL_DCH (CPC) to CELL_FACH or enhanced CELL_FACH and state
transition from CELL_DCH (without CPC) to CELL_FACH use the same scheme. The only
difference lies in parameter settings.
For details about state transition from CELL_DCH (CPC) to CELL_FACH and from
CELL_DCH (CPC) to enhanced CELL_FACH, see State Transition Feature Parameter
Description.

2.6 Mobility Management

A UE initiating a handover procedure supports DTX-DRX only when all cells in the active set
for the UE support DTX. When a cell in the active set does not support DTX-DRX, the UE does
not support DTX-DRX either.
You are advised to enable this feature for all cells instead of for only several cells in an active
set. This helps reduce reconfiguration signaling.

2.7 Power Control

DTX affects power control on the network side. When the network side does not detect signals
from a DTX UE on the uplink DPCCH, the network side suspends power control on the DTX
UE. Network KPIs are not affected because UEs periodically send signals on the uplink DPCCH
and power control can be performed on these UEs.
Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

WCDMA RAN
CPC Feature Parameter Description

2 CPC-DTX/DRX

2.8 Load Control

For a UE using DTX-DRX, the RNC performs admission on cells that are to be added to the
active set for the UE. For a UE that starts to use DTX-DRX, the RNC performs admission on
all cells in the active set for the UE. In the uplink, the admission is performed on the E-DCH,
not on the DPCCH. In the downlink, the admission is performed on the HS-DSCH. The
admission policies for the E-DCH and HS-DSCH are the same as those before CPC - DTX /
DRX is enabled.

2.9 HSDPA Scheduling Algorithm

For a UE using DRX, scheduling can be performed for the UE at the HS-SCCH reception pattern
or during n subframes after HSDPA scheduling is complete. The value of n is specified by
InactThsForDrxCycle.

2.10 Automatic Activation and Deactivation on NodeBs

DRX is activated or deactivated based on the QoS. QoS specifications for DRX UEs are
monitored. When data to be transmitted in the MAC-ehs queue waits for a long period and the
QoS cannot be guaranteed, DRX is deactivated. When data to be transmitted in the MAC-ehs
queue waits for a short period and the QoS can be guaranteed, DRX is activated.
DTX is activated or deactivated based on the uplink throughput. DTX is activated or deactivated
based on the uplink throughput. When a UE's uplink throughput is larger than 400 kbit/s,
continuous transmission is required in the uplink E-DCH and DPCCH at the same time. In this
case, DTX needs to be deactivated. When a UE's uplink throughput is less than 200 kbit/s, DTX
can be used to reduces the uplink interference. In this case, DTX needs to be activated.
The activation and deactivation functions have no control switch and they are enabled by default.
In addition, the QoS and uplink throughput thresholds are unconfigurable.

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

WCDMA RAN
CPC Feature Parameter Description

3 CPC HS-SCCH Less Operation

CPC HS-SCCH Less Operation

This section describes the WRFD-010687 CPC-HS-SCCH Less operation feature.

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

WCDMA RAN
CPC Feature Parameter Description

3 CPC HS-SCCH Less Operation

3.1 Overview
In the case of HSDPA, for small-packet services such as VoIP, the power consumption of the
HS-SCCH may be higher than that of a traffic channel. In addition, the HS-SCCH limits the
maximum number of HSDPA users that can be scheduled in each TTI. This limitation results
in increasing data transmission delay and decreasing user capacity of delay-sensitive services.
The CPC HS-SCCH Less Operation feature allows the initial transmission without the HSSCCH. Retransmission still requires the HS-SCCH. Thus, HS-SCCH Less Operation reduces
the power consumption and occupation of the HS-SCCH during downlink transmission, allows
more services to be scheduled at the same time, and improves the system capacity.
The requirements of HS-SCCH Less Operation are listed in Table 3-1.
Table 3-1 Requirements of HS-SCCH Less Operation
Item

Requirement

CN

None

RNC

The RNC also needs to control the use of HS-SCCH Less

Operation during RB setup, reconfiguration, and handover.
RNC needs to configure all the data and signaling to the HSPA
channel. DCHs are not allowed with HS-SCCH Less Operation.

NodeB

The NodeB needs to support the HS-SCCH type 2.

The NodeB scheduler needs to determine finally whether to use
this feature in transmission if a UE is configured with the feature.

UE

The UE needs to support the feature.

3.2 Basic Principle

Overview
Figure 3-1 shows the principle of HS-SCCH Less Operation.

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

10

WCDMA RAN
CPC Feature Parameter Description

3 CPC HS-SCCH Less Operation

Figure 3-1 impact of HS-SCCH Less Operation

Initial transmission
For the initial transmission, the NodeB does not send the HS-SCCH to the UE. The NodeB
adds the UE ID to the CRC information on the HS-DSCH and the UE can identify its data.
Then, the UE decodes the data block on the HS-PDSCH. The UE is required to respond
with ACK after receiving correct data, but it need not respond with NACK in other cases.
There is no control information during the initial transmission. Therefore, a predefined set
of transport block sizes are used in the downlink, and the UE receives the data through
blind detection. In the case of HS-SCCH Less Operation, four predefined transport block
sizes and QPSK modulation can be used for transmission. The peak rate is limited to 742
kbit/s. The operator can set the predefined transport block sizes by using the RNC command
SET UHSSCCHLESSOPPARA for different services

Retransmission
If the NodeB does not receive ACK from the UE after the initial transmission, it retransmits
the data through the HS-DSCH and the control information through the HS-SCCH. Whether
the retransmitted data is received is reported by the UE through ACK or NACK. A
maximum of two retransmissions are allowed.
The RAN determines whether to use HS-SCCH Less Operation based on downlink traffic
volume.

HS-PDSCH
The CRC process is changed to support the feature.
When the HS-SCCH Less Operation is applied, the NodeB does not transmit HS-SCCH. For
UE to identify the transmission on HS-PDSCH, the NodeB adds the UE ID information to the
CRC of HS-DSCH block.

HS-SCCH Type 2
To implement HS-SCCH Less Operation, a new HS-SCCH frame type, that is, HS-SCCH type
2, is introduced. HS-SCCH type 2 carries the information about retransmission, such as the
transport block size, pointer to the previous transmission, and number of retransmissions. For
details, see section "Coding for HS-SCCH type 2" in 3GPP TS 25.212.
Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

11

WCDMA RAN
CPC Feature Parameter Description

3 CPC HS-SCCH Less Operation

The comparison of HS-SCCH type 1 and type 2 is listed in the following table.
Bit

1-7

Part 1

9-14

15

16

17

18

19

20

21

Part 2

HSSCCH
Type 1

CCS

MS

TBS

HAP

HSSCCH
Type 2

CCS

MS

Type

TBS Index

RV

Pointer

ND

ReT
X

Reserve

The coding method of part 1 is not changed, but the code number indicated by CCS is limited
to one or two. The MS is fixed to 0, which means the modulation is fixed to QPSK.
The coding method of part 2 is changed to provide additional signaling to support HS-SCCH
Less Operation.
l

Type field is fixed to a value so that a UE can identify the HS-SCCH type 2.

TBS index is used to indicate one of the four pre-configured TBS.

Pointer is used to indicate the previously transmitted position to assist soft combination.

ReTX is used to indicate the transmission times.

Reserve bit is not used.

3.3 Radio Bearers

CPC DTX-DRX is an optional feature. A prerequisite for using CPC is that HSDPA, HSUPA,
and SRB over HSPA are activated.
l

The DCH is not configured in the uplink or downlink. The E-DCH is configured in the
uplink, and the HS-DSCH and F-DPCH are configured in the downlink.

Signaling and data are carried on HSPA channels. Therefore, CPC is dependent on SRB
over HSDPA and SRB over HSUPA.

HS-SCCH Less Operation can be selected if the following conditions are met:
l

HS-SCCH Less Operation is supported by the network and the UE, and it is activated.
To activate HS-SCCH Less Operation, select HS_SCCH_LESS_OPERATION of the
HspaPlusSwitch parameter, and CFG_HSPA_HSSCCH_LESS_OP_SWITCH of the
CfgSwitch parameter.

The SRB is carried on HS-DSCH for the downlink and E-DCH for the uplink. For details,
see Radio Bearers Feature Parameter Description.

The service type is CS voice over HSPA service, PS voice service, PS streaming service,
or PS BE service.

The downlink HS-DSCH and uplink E-DCH are selected as transport channels.

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

12

WCDMA RAN
CPC Feature Parameter Description

3 CPC HS-SCCH Less Operation

HS-SCCH Less Operation and MIMO cannot be used simultaneously. MIMO takes precedence
over HS-SCCH Less Operation. Therefore, HS-SCCH Less Operation cannot be selected if
MIMO is selected.

3.4 Mobility Management

Enable the HS-SCCH Less operation feature only when the best cell supports this feature.
Disable the HS-SCCH Less Operation feature if the best cell does not support this feature.

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

13

WCDMA RAN
CPC Feature Parameter Description

4 Related Features

Related Features

4.1 WRFD-010686 CPC - DTX / DRX

4.1.1 Prerequisite Features
l

WRFD-010636 SRB over HSUPA

WRFD-010652 SRB over HSDPA

4.1.2 Mutually Exclusive Features

None

4.1.3 Impacted Features

l

WRFD-010712 Adaptive Configuration of Traffic Channel Power offset for HSUPA

When CPC-DTX/DRX is enabled, gains from Adaptive Configuration of Traffic Channel
Power offset for HSUPA decrease. Likewise, when Adaptive Configuration of Traffic
Channel Power offset for HSUPA is enabled, gains from CPC-DTX/DRX decrease.
This is because CPC-DTX/DRX increases system capacity by reducing signals transmitted
on the DPCCH and lowering interference from the DPCCH while Adaptive Configuration
of Traffic Channel Power offset for HSUPA reduces the DPCCH power and therefore
leaves less interference from the DPCCH to be lowered.
System throughput is always greater when CPC-DTX/DRX is enabled together with
Adaptive Configuration of Traffic Channel Power offset for HSUPA, as compared with
when CPC-DTX/DRX is not enabled together with Adaptive Configuration of Traffic
Channel Power offset for HSUPA or none of the features is enabled.
For details about Adaptive Configuration of Traffic Channel Power offset for HSUPA, see
Power Control Feature Parameter Description.

WRFD-010641 HSUPA Adaptive Transmission

When CPC-DTX/DRX is enabled, gains from HSUPA Adaptive Transmission decrease.
Likewise, when HSUPA Adaptive Transmission is enabled, gains from CPC-DTX/DRX
decrease.

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

14

WCDMA RAN
CPC Feature Parameter Description

4 Related Features

This is because CPC-DTX/DRX increases system capacity by reducing signals transmitted

on the DPCCH and lowering interference from the DPCCH while HSUPA Adaptive
Transmission reduces the DPCCH power and therefore leaves less interference from the
DPCCH to be lowered.
System throughput is always greater when CPC-DTX/DRX is enabled together with
HSUPA Adaptive Transmission, as compared with when CPC-DTX/DRX is not enabled
together with HSUPA Adaptive Transmission or none of the features is enabled.
For details about HSUPA Adaptive Transmission, see HSUPA Feature Parameter
Description.
l

WRFD-010210 Control Channel Parallel Interference Cancellation (CCPIC) and Control

Channel Parallel Interference Cancellation (Phase 2)
When CPC-DTX/DRX is enabled, gains from CCPIC decrease. Likewise, when CCPIC is
enabled, gains from CPC-DTX/DRX decrease.
This is because CPC-DTX/DRX increases system capacity by reducing signals transmitted
on the DPCCH and lowering interference from the DPCCH while CCPIC increases system
capacity by canceling interference from the DPCCH and therefore leaves less interference
from the DPCCH to be lowered.
System throughput is always greater when CPC-DTX/DRX is enabled together with
CCPIC, as compared with when CPC-DTX/DRX is not enabled together with CCPIC or
none of the features is enabled.
For details about Control Channel Parallel Interference Cancellation (CCPIC) and Control
Channel Parallel Interference Cancellation (Phase 2), see Interference Cancellation
Feature Parameter Description.

WRFD-020500 Enhanced Fast Dormancy

As CPC-DTX/DRX takes effect only on UEs in the CELL_DCH state, CPC-DTX/DRX
can produce gains in the uplink capacity only when UEs are in the CELL_DCH state.
However, Enhanced Fast Dormancy can accelerate the state transition of UEs from
CELL_DCH to CELL_FACH, CELL_PCH, or URA_PCH. As a result, scenarios where
CPC-DTX/DRX takes effect are reduced.
For details about Enhanced Fast Dormancy, see Enhanced Fast Dormancy Feature
Parameter Description.

4.2 WRFD-010687 CPC-HS-SCCH Less operation

4.2.1 Prerequisite Features
l

WRFD-010636 SRB over HSUPA

WRFD-010652 SRB over HSDPA

4.2.2 Mutually Exclusive Features

None

4.2.3 Impacted Features

None
Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

15

WCDMA RAN
CPC Feature Parameter Description

5 Network Impact

Network Impact

5.1 WRFD-010686 CPC - DTX / DRX

5.1.1 System Capacity
CPC-DTX/DRX maximally decreases the uplink cell load by 30% to 40% when there is
sufficient amount of data to transmit in the downlink and multiple UEs are continuously
downloading data.
In scenarios where the uplink cell load is the same, PC-DTX/DRX enables more UEs in the
CELL_DCH state to be admitted.
In addition, CPC-DTX/DRX saves the power consumption of UEs. The power-saving effects
vary depending on UEs.

5.1.2 Network Performance

CPC-DTX/DRX decreases the data transmit frequency on the DPCCH, thereby decreasing the
frequency of uplink multipath searching and inner loop power control. In scenarios with
significant signal fluctuation due to radio environment, the uplink of a UE easily becomes out
of synchronization. As a result, the PS call drop ratio may increase slightly. The increase in the
PS call drop ratio depends on the radio environment.

5.2 WRFD-010687 CPC-HS-SCCH Less operation

5.2.1 System Capacity
For the initial transmission of small predefined packets, the HS-SCCH less operation feature
does not allow the NodeB to send the HS-SCCH to the UE, decreasing downlink codes and
power consumption and increasing the capacity of downlink data services.

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

16

WCDMA RAN
CPC Feature Parameter Description

5 Network Impact

5.2.2 Network Performance

No impact.

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

17

WCDMA RAN
CPC Feature Parameter Description

6 Engineering Guidelines

Engineering Guidelines

6.1 Deployment of CPC-DTX / DRX

This section describes how to activate, verify, and deactivate the optional feature WRFD-010686
CPC - DTX /DRX.

6.1.1 When to Use CPC-DTX / DRX

CPC-DTX/DRX is recommended in the following scenarios:
l

The proportion of CPC-DTX/DRX UEs is high.

The uplink capacity needs to be increased.

The uplink DPCCH power accounts for a large proportion in the uplink RTWP.

The gains produced by CPC-DTX/DRX can be obviously observed when the following
conditions are met:
l

The proportion of CPC-DTX/DRX UEs is higher than 20%.

NOTE

For details about how to query the proportion of CPC-DTX/DRX UEs, contact Huawei engineers.

The ratio of UEs using SRB over HS-DSCH to all UEs in the CELL_DCH state is high.
That is, the value of VS.HSDPA.SRBoH.UE.Mean.Cell/VS.CellDCHUEs is greater than
20%.

The uplink cell load over the Uu interface is high. That is, the following formula is true:
VS.MeanRTWP > Background noise + Target load 2 dB
where,
Target load = 10log10 [1/(1 MaxTargetUlLoadFactor)]

The number of HSUPA UEs in a cell is large. That is, the value of the
VS.HSUPA.UE.Mean.Cell counter is greater than five.

Enable this feature for all cells instead of for only several cells in an active set.

This feature depends on SRB over HSUPA and SRB over HSDPA. It is recommended that the
following operations be performed:
Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

18

WCDMA RAN
CPC Feature Parameter Description

6 Engineering Guidelines

1.

Enable SRB over HSUPA and observe the KPIs.

2.

One week later, enable SRB over HSDPA and observe the KPIs.

3.

Enable CPC-DTX/DRX and observe the KPIs.

After the preceding operations, compare the KPIs before and after the feature activation to
determine the impact of CPC-DTX/DRX on network KPIs. For details about the impacts of SRB
over HSUPA on network KPIs, see HSUPA Feature Parameter Description. For details about
the impacts of SRB over HSDPA on network KPIs, see HSDPA Feature Parameter
Description.

6.1.2 Information to Be Collected

l

Collect the counters described in the following table to determine whether it is appropriate
to enable this feature in live networks and evaluate the gains produced by this feature.

Counter
Name

Counter Description

NE

Remarks

VS.HSDPA.S
RBoH.UE.Me
an.Cell

Average number of
users capable of the
SRB over HSDPA
feature in a cell

RNC

VS.CellDCH
UEs

Number of UEs in
CELL_DCH State for
Cell

RNC

This counter measures ratio of UEs

using SRB over HS-DSCH to all UEs
in the CELL_DCH state in a cell. The
larger the ratio, the greater the gains
produced by CPC-DTX/DRX.

VS.MeanRT
WP

Mean Power of Totally

Received Bandwidth
for Cell

RNC

This counter measures the uplink cell

load over the Uu interface. The higher
the uplink cell load before CPCDTX/DRX is enabled, the greater the
gains produced by CPC-DTX/DRX.

VS.HSUPA.U
E.Mean.Cell

Average Number of
HSUPA UEs in a Cell

RNC

This counter measures the number of

HSUPA UEs in a cell. The larger the
number of HSUPA UEs in a cell, the
greater the gains produced by CPCDTX/DRX.

VS.HSUPA.T
hruput

Total traffic volume of

HSUPA users in a cell

NodeB

VS.HSUPA.
MeanBitRate

Average throughput of
HSUPA users in a cell

NodeB

The gains produced by CPC-DTX/

DRX must be observed when the
values of the three counters basically
remain unchanged.

VS.HSUPA.
MeanBitRate.
WithData

Average throughput of
HSUPA users in a cell
when data is
transmitted

NodeB

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

19

WCDMA RAN
CPC Feature Parameter Description

6 Engineering Guidelines

Counter
Name

Counter Description

NE

Remarks

VS.HSUPA.L
oadOutput.0 to
VS.HSUPA.L
oadOutput.25

Number of times the Uu

interface load is within
different ranges (ratio
of the actual cell RTWP
to the reference cell
RTWP)

NodeB

These counters are used to observe

the gains produced by CPC-DTX/
DRX in the uplink capacity (that is, to
observe whether the uplink cell load
is reduced).

VS.DPCCH.
10ms.POWER

DPCCH uplink power

load of 10 ms TTI
HSUPA services in a
cell

NodeB

VS.DPCCH.
2ms.POWER

DPCCH uplink power

load of 2 ms TTI
HSUPA services in a
cell

NodeB

Obtain the models of UEs that are incompatible with CPC-DTX/DRX.

During the initial stage of commercial deployment of the CPC-DTX/DRX feature, UEs
that are incompatible with this feature should be blacklisted. In this case, the blacklisted
UEs cannot use the CPC-DTX/DRX feature during RAB setup, RAB modification, periodic
DRD for HSPA or HSPA+ technology, and transition from other states to the CELL_DCH
state, thereby avoiding PS call drops caused by incompatibility between this feature and
UEs. Before enabling the CPC-DTX/DRX feature, contact Huawei technical support to
obtain the models of UEs that are incompatible with this feature.
NOTE

Before enabling the CPC-DTX/DRX feature, you need to run the SET URRCTRLSWITCH command
and select the RNC_PS_QUERY_UE_IMEI_SWITCH check box under the PROCESSSWITCH2
parameter to obtain the international mobile equipment identity (IMEI) of a UE.

6.1.3 Requirements
l

Dependencies on Hardware
Dependencies on NodeB Hardware are as follows:
The BTS3812A, BTS3812E, or BTS3812AE must be configured with the EBBI, EBOI,
EULP/EULPd (supporting DTX), and EDLP (supporting DRX) boards.
The DBS3800 must be configured with the EBBC or EBBCd board.
The 3900 series base stations must be configured with the WBBPb, WBBPd, or WBBPf
board.
This feature does not depend on the RNC hardware.

Dependencies on software
Dependencies on RNC software
V900R15C00SPH525 and later versions

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

20

WCDMA RAN
CPC Feature Parameter Description

6 Engineering Guidelines

Dependencies on NodeB software

V200R15C00SPC240 and later versions
l

Dependencies on Other Features

The following features must have been configured before this feature is activated:
WRFD-010610 SRB over HSUPA and WRFD-010652 SRB over HSDPA.

License
The license on the RNC side has been activated. For details about the license items and
how to activate the license, see License Management Feature Parameter Description.

Feature ID

Feature Name

License Control
Item

NE

Sales Unit

WRFD-010686

CPC-DTX/DRX

CPC - DTX / DRX

(per kbps)

RNC

per Mbps

Other Prerequisites
The UE is of 3GPP Release 7 or later and supports this feature.
NOTE

The value of the "DPCCH Discontinuous Transmission support" IE carried in the RRC
CONNECTION REQUEST message indicates whether the UE supports this feature. For details, see
3GPP TS25.331.
The following figure shows the signaling procedure of the RRC CONNECTION REQUEST
message.

6.1.4 Activation
Step 1 Run the RNC MML command SET UCORRMALGOSWITCH (CME single configuration:
UMTS Radio Global Configuration Express > Connection_Oriented RRM Switch
Configuration > Connection Oriented Algorithm Switches; CME batch modification center:
Modifying RNC Parameters in Batches). In this step, select
CFG_HSPA_DTX_DRX_SWITCH from the Channel Configuration Strategy Switch dropdown list.
Step 2 Run the RNC MML command MOD UCELLALGOSWITCH (CME single configuration:
UMTS Cell Configuration Express > Cell Parameters > Cell Algorithm Switches; CME batch
modification center: Modifying UMTS Cell Parameters in Batches). In this step, select
DTX_DRX(Cell DTX_DRX Function Switch) from the Cell Hspa Plus function switch dropdown list.
Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

21

WCDMA RAN
CPC Feature Parameter Description

6 Engineering Guidelines

Step 3 (Optional) Run the RNC MML command SET UFRC (CME single configuration: UMTS Radio
Global Configuration Express > Basic Resource Control Parameter Configuration > RNC
Oriented FRC Algorithm Parameters; CME batch modification center: Modifying RNC
Parameters in Batches) and select the DTX_DRX check box under the HSPA Technologies
Retried by UEs parameter to enable periodic DRD for CPC-DTX/DRX.
NOTE

Before enabling periodic DRD for CPC-DTX/DRX, enable periodic DRD for other features on which this feature
depends. That is, select the SRB_OVER_HSDPA and SRB_OVER_HSUPA check boxes under the HSPA
Technologies Retried by UEs parameter.

Step 4 (Optional) When UEs are incompatible with CPC-DTX/DRX, run the RNC MML command
ADD UIMEITAC to blacklist these UEs. In this step, set The function of the TAC to
Special_User_Enhance, set TAC and Description of these UEs to appropriate values, and
select the SPECUSER_CPC_DTX_DRX_DISABLED_SWITCH check box under the
Special User Function Switch3 parameter.
----End

6.1.5 Activation Observation

Monitor counters or trace signaling to check whether CPC-DTX/DRX is working properly.
l

Monitoring counters
Monitor the value of the VS.CPC.DTXCfg.UserNum counter. This counter measures the
number of UEs that support uplink DTX in a cell. If the counter value is not zero, this
feature is working properly for the cell.

Tracing signaling

Step 1 Create a Uu tracing task on the RNC LMT, as shown in Figure 6-1.
Figure 6-1 Uu interface tracing task

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

22

WCDMA RAN
CPC Feature Parameter Description

6 Engineering Guidelines

Step 2 Use an HSPA-capable UE to establish a new service.

Step 3 Check whether the following IEs are included in the RRC_RB_SETUP message, as shown in
Figure 6-2.
l dtx-drx-TimingInfo
l dtx-drx-Info
Figure 6-2 IE information

----End

6.1.6 Deactivation
Run the RNC MML command MOD UCELLALGOSWITCH (CME single configuration:
UMTS Cell Configuration Express > Cell Parameters > Cell Algorithm Switches; CME batch
modification center: Modifying UMTS Cell Parameters in Batches). In this step, deselect
DTX_DRX(Cell DTX_DRX Function Switch) from the Cell Hspa Plus function switch dropdown list.

6.1.7 MML Command Examples

//Activating CPC - DTX /DRX
//Enabling RNC-level CPC-DTX/DRX
SET UCORRMALGOSWITCH: CfgSwitch=CFG_HSPA_DTX_DRX_SWITCH-1;
//Enabling cell-level CPC-DTX/DRX
MOD UCELLALGOSWITCH: CellId=0, HspaPlusSwitch=DTX_DRX-1;
//Enabling periodic DRD for CPC-DTX/DRX
SET UFRC: RetryCapability=DTX_DRX-1;
//Blacklisting UEs that are incompatible with CPC-DTX/DRX
ADD UIMEITAC: TAC_FUNC=Special_User_Enhance, TAC=35314704, Description="UE1",
SpecUserFunctionSwitch3=SPECUSER_CPC_DTX_DRX_DISABLED_SWITCH-1;
ADD UIMEITAC: TAC_FUNC=Special_User_Enhance, TAC=35323705, Description="UE2",
SpecUserFunctionSwitch3=SPECUSER_CPC_DTX_DRX_DISABLED_SWITCH-1;
ADD UIMEITAC: TAC_FUNC=Special_User_Enhance, TAC=35782805, Description="UE3",
SpecUserFunctionSwitch3=SPECUSER_CPC_DTX_DRX_DISABLED_SWITCH-1;
ADD UIMEITAC: TAC_FUNC=Special_User_Enhance, TAC=35782905, Description="UE4",
SpecUserFunctionSwitch3=SPECUSER_CPC_DTX_DRX_DISABLED_SWITCH-1;
ADD UIMEITAC: TAC_FUNC=Special_User_Enhance, TAC=35666803, Description="UE5",
SpecUserFunctionSwitch3=SPECUSER_CPC_DTX_DRX_DISABLED_SWITCH-1;
ADD UIMEITAC: TAC_FUNC=Special_User_Enhance, TAC=35468505, Description="UE6",
SpecUserFunctionSwitch3=SPECUSER_CPC_DTX_DRX_DISABLED_SWITCH-1;
ADD UIMEITAC: TAC_FUNC=Special_User_Enhance, TAC=35639805, Description="UE7",
SpecUserFunctionSwitch3=SPECUSER_CPC_DTX_DRX_DISABLED_SWITCH-1;
ADD UIMEITAC: TAC_FUNC=Special_User_Enhance, TAC=35580205, Description="UE8",
SpecUserFunctionSwitch3=SPECUSER_CPC_DTX_DRX_DISABLED_SWITCH-1;
ADD UIMEITAC: TAC_FUNC=Special_User_Enhance, TAC=86036702, Description="UE9",
SpecUserFunctionSwitch3=SPECUSER_CPC_DTX_DRX_DISABLED_SWITCH-1;
//Deactivating CPC - DTX /DRX
MOD UCELLALGOSWITCH: CellId=0, HspaPlusSwitch=DTX_DRX-0;

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

23

WCDMA RAN
CPC Feature Parameter Description

6 Engineering Guidelines

6.1.8 Performance Monitoring

CPC-DTX/DRX can reduce the uplink cell load. The more the UEs using CPC-DTX/DRX, the
more the uplink cell load is reduced.
The gains produced by CPC-DTX/DRX should be observed when the values of the following
counters basically remain unchanged:
l

VS.HSUPA.Thruput

VS.HSUPA.MeanBitRate

VS.HSUPA.MeanBitRate.WithData

The method of observing the gains produced by CPC-DTX/DRX is affected by the ratio of UEs
using CPC-DTX/DRX to all UEs in the CELL_DCH state.
Ratio of UEs using CPC-DTX/DRX to all UEs in the CELL_DCH state = (Sum of the value of
the VS.CPC.DTXAct.UserNum counter for all the cells under an RNC/Number of the cells under
an RNC)/VS.CellDCHUEs.RNC
l

VS.CPC.DTXAct.UserNum (NodeB counter): user numbers with the status of UL_DTX

and activated Configuration

VS.CellDCHUEs.RNC (RNC counter): number of UEs in the CELL_DCH state for the
RNC

When the ratio of UEs using CPC-DTX/DRX to all UEs in the CELL_DCH state is greater than
or equal to 20%, monitor the RTWP to view the uplink cell load gains provided by this feature.
To calculate the gains produced by CPC-DTX/DRX in the uplink cell load, do as follows:
1.

Obtain the value of the VS.MeanRTWP counter, which is recorded as RTWPon.

2.

Record the value of the VS.MeanRTWP counter for the cell before CPC-DTX/DRX is
enabled as RTWPoff.

3.

Calculate the difference between RTWPoff and RTWPon to obtain the gains produced by
CPC-DTX/DRX in the uplink cell load.

When the ratio of UEs using CPC-DTX/DRX to all UEs in the CELL_DCH state is less than
20%, the gains provided by CPC-DTX/DRX in the uplink cell load may be less noticeable by
monitoring the RTWP. In this case, monitor the gains in the uplink cell load in the top cells
where the following conditions are met:
l

The ratio of UEs using CPC-DTX/DRX to all UEs in the CELL_DCH state in a cell
(VS.CPC.DTXAct.UserNum/VS.CellDCHUEs) is high.

The ratio of UEs using SRB over HS-DSCH to all UEs in the CELL_DCH state in a cell
is high.

The uplink cell load over the Uu interface is high.

The number of HSUPA UEs in a cell is large.

The following counters for the top cells can be used to monitor the gains produced by CPCDTX/DRX in the uplink cell load:
l

VS.DPCCH.10ms.POWER and VS.DPCCH.2ms.POWER

The values of the two counters decrease after CPC-DTX/DRX is enabled.

VS.HSUPA.LoadOutput.0 to VS.HSUPA.LoadOutput.25

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

24

WCDMA RAN
CPC Feature Parameter Description

6 Engineering Guidelines

The number of times the uplink cell load over the Uu interface becoming low increases,
and the number of times the uplink cell load over the Uu interface becoming high decreases.

6.1.9 Parameter Optimization

If CPC-DTX/DRX increases the PS call drop ratio, perform the following operations to check
whether call drops occur on a type of UE in a certain scenario:
1.

Calculate the rate of RABs abnormally released for UEs processing PS services by using
the following formula to check whether most of call drops occur on these UEs:
Rate of RABs abnormally released for UEs processing PS services =
VS.RAB.AbnormRel.PS/(VS.RAB.AbnormRel.PS + VS.RAB.NormRel.PS)

2.

Check whether a type of UE experiences call drops in a certain scenario.

If a type of UE enabled with CPC-DTX/DRX easily experiences call drops in a certain
scenario, this type of UE is incompatible with CPC-DTX/DRX in such scenarios. In this
case, run the RNC MML command ADD UIMEITAC and select the
SPECUSER_CPC_DTX_DRX_DISABLED_SWITCH check box under the Special
User Function Switch3 parameter to blacklist these UEs.

3.

Check whether call drops frequently occur in the following scenarios: DRD, hard
handovers, or state transitions from CELL_FACH to CELL_DCH (F2D for short) or from
CELL_PCH/URA_PCH to CELL_DCH (P2D for short).
If yes, the NodeB must obtain the start time of the period specified by the
DtxDrxEnablingDelay parameter upon radio link set-up in the preceding scenarios. If the
NodeB does not obtain the start time, it will activate the CPC at a time different from the
time the UE activates the CPC. As a result, a call drop occurs. To enable the NodeB to
obtain the start time upon radio link setup in the preceding scenarios, run the MML
command SET UALGORSVPARA and set CPC_OPT_FOR_RLSETUP_SWITCH to
ON.

4.

Check whether call drops are caused by link synchronization failures.

If link synchronization failures cause call drops and the number of UEs in the CELL_DCH
state and the number of UEs configured with CPC are small, run the MML command SET
NODEBRSVDPARA and select the RSVDBIT8 check box under the
NODEBRSVDPARA1 parameter to enable the CPC link synchronization enhancement
function. This function enhances the link synchronization performance in the CPC mode.

If network KPIs continue deteriorating after this type of UE is blacklisted, it is recommended

that the parameters for the CPC-DTX/DRX feature be reconfigured. For example, set the
DtxCycle2 parameter to 5 to reduce the DRX and DTX periods. During parameter setting, the
relationships between parameters must meet the requirements specified in 3GPP. For details
about the relationships between parameters, see section 8.6.6.39 "DTX-DRX information (FDD
only)" in 3GPP TS 25.331 V9.0.0.

6.1.10 Troubleshooting
None

6.2 Deployment of CPC-HS-SCCH less operation

This section describes how to activate, verify, and deactivate the optional feature WRFD-010687
CPC - HS-SCCH less operation.
Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

25

WCDMA RAN
CPC Feature Parameter Description

6 Engineering Guidelines

6.2.1 When to Use CPC-HS-SCCH less operation

CPC-HS-SCCH less operation is recommended when the following conditions are met:
l

The proportion of CPC HS-SCCH less operation UEs is higher than 20%.

The HS-SCCH usage is high in a cell. For example, the HS-SCCH usage is considered high
when the value of the VS.ScchCodeUtil.Mean.Data counter exceeds 50%.

6.2.2 Information to Be Collected

The following table lists the counter information to be collected before the feature is enabled.
Counter name

Description

VS.DataTtiRatio.Mean

Ratio of the time when at least one HSDPA user has

data to transmit in the queue buffer

VS.HSDPA.InactiveDataTtiRatio.
Mean

Average ratio of the time when at least one HSDPA

user has data to transmit in the buffer but no HSDPA
user transmits data at the physical layer

VS.HSDPA.2ScchCodeRatio

The time ratio of only using two HS-SCCH codes for

cell

VS.HSDPA.3ScchCodeRatio

The time ratio of only using three HS-SCCH codes for

cell

VS.HSDPA.4ScchCodeRatio

The time ratio of only using four HS-SCCH codes for

cell

VS.ScchCodeUtil.Mean.Data

Average usage of HS-SCCH code resources when at

least one HSDPA user has data to transmit in the
queue buffer

The VS.ScchCodeUtil.Mean.Data counter provides the average usage of HS-SCCH code

resources. CPC-HS-SCCH less operation is recommended when the value of this counter is high.
The value of VS.DataTtiRatio.Mean minus VS.HSDPA.InactiveDataTtiRatio.Mean indicates
the ratio of duration when there is data transmission at the physical layer to a measurement period
in a cell. You can obtain the usage of HS-SCCH code resources on a specific SCCH channel by
monitoring counters VS.HSDPA.2ScchCodeRatio, VS.HSDPA.3ScchCodeRatio, and
VS.HSDPA.4ScchCodeRatio. CPC-HS-SCCH less operation is recommended when the values
of these counters are high.

6.2.3 Requirements
l

Dependencies on Hardware
This feature does not have any special requirements for hardware.

Dependencies on Other Features

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

26

WCDMA RAN
CPC Feature Parameter Description

6 Engineering Guidelines

The configurations of the features on which this feature depends are complete. This feature
depends on the feature WRFD-010652 SRB over HSDPA, WRFD-010636 SRB over
HSUPA.
l

License
The license "CPC-HS-SCCH Less Operation" on the RNC side has been activated. For
details about the license items and how to activate the license, see License Management
Feature Parameter Description.

Feature ID

Feature Name

License Control
Item

NE

Sales Unit

WRFD-010687

CPC - HS-SCCH
less operation

CPC - HS-SCCH less

operation (per kbps)

RNC

per Mbps

Other Prerequisites
The UE must be Release-7 (or later) to support this feature.
NOTE

The value of the "HS-SCCHless HS-DSCH operation support" IE carried in the RRC CONNECTION
SETUP COMPLETE message indicates whether the UE supports this feature. For details, see 3GPP
TS25.331.

6.2.4 Activation
Step 1 Run the RNC MML command SET UCORRMALGOSWITCH (CME single configuration:
UMTS Radio Global Configuration Express > Connection_Oriented RRM Switch
Configuration > Connection Oriented Algorithm Switches; CME batch modification center:
Modifying RNC Parameters in Batches). In this step, select
CFG_HSPA_HSSCCH_LESS_OP_SWITCH in the Channel configuration strategy
switch parameter to switch on the HS-SCCH less operation function.
Step 2 Run the RNC MML command MOD UCELLALGOSWITCH (CME single configuration:
UMTS Cell Configuration Express > Cell Parameters > Cell Algorithm Switches; CME batch
modification center: Modifying UMTS Cell Parameters in Batches). In this step, select
HS_SCCH_LESS_OPERATION(Cell HS_SCCH LESS OPERATION Function Switch)
in the Cell Hspa Plus function switch parameter to activate the HS-SCCH less operation
function at the cell level.
Step 3 (Optional) Run the RNC MML command SET UFRC (CME single configuration: UMTS Radio
Global Configuration Express > Basic Resource Control Parameter Configuration > RNC
Oriented FRC Algorithm Parameters; CME batch modification center: Modifying RNC
Parameters in Batches) and select the HSSCCH_LESS_OPERATION check box under the
HSPA Technologies Retried by UEs parameter to enable periodic DRD for CPC-HS-SCCH
less operation.
NOTE

Before enabling periodic DRD for CPC-HS-SCCH less operation, enable periodic DRD for other features on
which this feature depends. That is, select the SRB_OVER_HSDPA and SRB_OVER_HSUPA check boxes
under the HSPA Technologies Retried by UEs parameter.

Step 4 (Optional) When UEs are incompatible with CPC-DTX/DRX, run the RNC MML command
ADD UIMEITAC to blacklist these UEs. In this step, set The function of the TAC to
Special_User_Enhance, set TAC and Description of these UEs to appropriate values, and
Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

27

WCDMA RAN
CPC Feature Parameter Description

6 Engineering Guidelines

select the SPECUSER_CPC_DTX_DRX_DISABLED_SWITCH check box under the

Special User Function Switch3 parameter.
----End

6.2.5 Activation Observation

Step 1 Use an HSPA-supportive UE to initiate a PS service. The service is carried on E-DCH and HSDSCH.
NOTE

How to make the service on E-DCH, see HSUPA Feature Parameter Description.

Step 2 Check the RRC_RB_SETUP message traced over the Uu interface. You can find the hs-scchLessInfo IE which contains the parameters related to CPC-HSSCCH less operation, as shown
in Figure 6-3.
Figure 6-3 RRC_RB_SETUP Information

----End

6.2.6 Deactivation
Step 1 Run the RNC MML command SET UCORRMALGOSWITCH (CME single configuration:
UMTS Radio Global Configuration Express > Connection_Oriented RRM Switch
Configuration > Connection Oriented Algorithm Switches; CME batch modification center:
Modifying RNC Parameters in Batches). In this step, deselect
Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

28

WCDMA RAN
CPC Feature Parameter Description

6 Engineering Guidelines

CFG_HSPA_HSSCCH_LESS_OP_SWITCH in the Channel configuration strategy switch

parameter to switch off the HS-SCCH less operation function.
Step 2 Run the RNC MML command MOD UCELLALGOSWITCH (CME single configuration:
UMTS Cell Configuration Express > Cell Parameters > Cell Algorithm Switches; CME batch
modification center: Modifying UMTS Cell Parameters in Batches). In this step, deselect
HS_SCCH_LESS_OPERATION(Cell HS_SCCH LESS OPERATION Function Switch)
in the Cell Hspa Plus function switch parameter to deactivate the HS-SCCH less operation
function at the cell level.
----End

6.2.7 MML Command Examples

//Activating CPC-HS-SCCH Less operation
SET UCORRMALGOSWITCH: CfgSwitch=CFG_HSPA_HSSCCH_LESS_OP_SWITCH-1;
MOD UCELLALGOSWITCH: CellId=0, HspaPlusSwitch=HS_SCCH_LESS_OPERATION-1;
SET UFRC: RetryCapability=HSSCCH_LESS_OPERATION-1;
//Deactivating CPC-HS-SCCH Less operation
SET UCORRMALGOSWITCH: CfgSwitch=CFG_HSPA_HSSCCH_LESS_OP_SWITCH-0;
MOD UCELLALGOSWITCH: CellId=0, HspaPlusSwitch=HS_SCCH_LESS_OPERATION-0;

6.2.8 Performance Monitoring

Monitor the NodeB counters listed in the following table to check the HS-SCCH less operation
performance.
Counter Name

NE

Description

VS.CPC.LesOpCfg.LesModeNum

NodeB

Schedule numbers to the user

configured less operation mode and
actually used less transferred

VS.CPC.LesOpCfg.SceduledNum

NodeB

Number of users in less mode in a cell

VS.ScchCodeUtil.Mean.Data

NodeB

Average usage of HS-SCCH code

resources when at least one HSDPA user
has data to transmit in the queue buffer

Higher values of the VS.CPC.LesOpCfg.LesModeNum and

VS.CPC.LesOpCfg.SceduledNum counters indicate greater gains provided by CPC-HSSCCH less operation.

The decreased value of the VS.ScchCodeUtil.Mean.Data counter after CPC-HS-SCCH less

operation is enabled indicates gains provided by this feature.

6.2.9 Parameter Optimization

None

6.2.10 Troubleshooting
None
Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

29

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameters

Table 7-1 Parameter description

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

RsvSwitch

BSC6900

ADD
UIMEITAC

WRFD-020500

Enhanced Fast
Dormancy

Meaning:Reserv
ed Switch. The
para reserved for
further change
request use.
Disuse
statement: This
parameter is
used
temporarily in
patch versions
and will be
replaced with a
new parameter
in later versions.
The new
parameter ID
reflects the
parameter
function.
Therefore, this
parameter is not
recommended
for the
configuration
interface.

MOD
UIMEITAC

GUI Value
Range:RESER
VED_SWITCH
_BIT1,
RESERVED_S

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

30

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
WITCH_BIT2,
RESERVED_S
WITCH_BIT3,
RESERVED_S
WITCH_BIT4,
RESERVED_S
WITCH_BIT5,
RESERVED_S
WITCH_BIT6,
RESERVED_S
WITCH_BIT7,
RESERVED_S
WITCH_BIT8,
RESERVED_S
WITCH_BIT9,
RESERVED_S
WITCH_BIT10
,
RESERVED_S
WITCH_BIT11
,
RESERVED_S
WITCH_BIT12
,
RESERVED_S
WITCH_BIT13
,
RESERVED_S
WITCH_BIT14
,
RESERVED_S
WITCH_BIT15
,
RESERVED_S
WITCH_BIT16
,
RESERVED_S
WITCH_BIT17
,
RESERVED_S
WITCH_BIT18
,
RESERVED_S
WITCH_BIT19
,
RESERVED_S
WITCH_BIT20
,

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

31

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
RESERVED_S
WITCH_BIT21
,
RESERVED_S
WITCH_BIT22
,
RESERVED_S
WITCH_BIT23
,
RESERVED_S
WITCH_BIT24
,
RESERVED_S
WITCH_BIT25
,
RESERVED_S
WITCH_BIT26
,
RESERVED_S
WITCH_BIT27
,
RESERVED_S
WITCH_BIT28
,
RESERVED_S
WITCH_BIT29
,
RESERVED_S
WITCH_BIT30
,
RESERVED_S
WITCH_BIT31
,
RESERVED_S
WITCH_BIT32
Unit:None
Actual Value
Range:RESER
VED_SWITCH
_BIT1,
RESERVED_S
WITCH_BIT2,
RESERVED_S
WITCH_BIT3,
RESERVED_S
WITCH_BIT4,
RESERVED_S

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

32

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
WITCH_BIT5,
RESERVED_S
WITCH_BIT6,
RESERVED_S
WITCH_BIT7,
RESERVED_S
WITCH_BIT8,
RESERVED_S
WITCH_BIT9,
RESERVED_S
WITCH_BIT10
,
RESERVED_S
WITCH_BIT11
,
RESERVED_S
WITCH_BIT12
,
RESERVED_S
WITCH_BIT13
,
RESERVED_S
WITCH_BIT14
,
RESERVED_S
WITCH_BIT15
,
RESERVED_S
WITCH_BIT16
,
RESERVED_S
WITCH_BIT17
,
RESERVED_S
WITCH_BIT18
,
RESERVED_S
WITCH_BIT19
,
RESERVED_S
WITCH_BIT20
,
RESERVED_S
WITCH_BIT21
,
RESERVED_S
WITCH_BIT22
,

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

33

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
RESERVED_S
WITCH_BIT23
,
RESERVED_S
WITCH_BIT24
,
RESERVED_S
WITCH_BIT25
,
RESERVED_S
WITCH_BIT26
,
RESERVED_S
WITCH_BIT27
,
RESERVED_S
WITCH_BIT28
,
RESERVED_S
WITCH_BIT29
,
RESERVED_S
WITCH_BIT30
,
RESERVED_S
WITCH_BIT31
,
RESERVED_S
WITCH_BIT32
Default
Value:RESERV
ED_SWITCH_
BIT1:0,RESER
VED_SWITCH
_BIT2:0,RESE
RVED_SWITC
H_BIT3:0,RES
ERVED_SWIT
CH_BIT4:0,RE
SERVED_SWI
TCH_BIT5:0,R
ESERVED_SW
ITCH_BIT6:0,
RESERVED_S
WITCH_BIT7:
0,RESERVED_
SWITCH_BIT8

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

34

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
:
0,RESERVED_
SWITCH_BIT9
:
0,RESERVED_
SWITCH_BIT1
0:0,RESERVE
D_SWITCH_BI
T11:0,RESERV
ED_SWITCH_
BIT12:0,RESE
RVED_SWITC
H_BIT13:0,RE
SERVED_SWI
TCH_BIT14:0,
RESERVED_S
WITCH_BIT15
:
0,RESERVED_
SWITCH_BIT1
6:0,RESERVE
D_SWITCH_BI
T17:0,RESERV
ED_SWITCH_
BIT18:0,RESE
RVED_SWITC
H_BIT19:0,RE
SERVED_SWI
TCH_BIT20:0,
RESERVED_S
WITCH_BIT21
:
0,RESERVED_
SWITCH_BIT2
2:0,RESERVE
D_SWITCH_BI
T23:0,RESERV
ED_SWITCH_
BIT24:0,RESE
RVED_SWITC
H_BIT25:0,RE
SERVED_SWI
TCH_BIT26:0,
RESERVED_S
WITCH_BIT27
:
0,RESERVED_
SWITCH_BIT2

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

35

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
8:0,RESERVE
D_SWITCH_BI
T29:0,RESERV
ED_SWITCH_
BIT30:0,RESE
RVED_SWITC
H_BIT31:0,RE
SERVED_SWI
TCH_BIT32:0

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

36

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

RsvSwitch

BSC6910

ADD
UIMEITAC

WRFD-020500

Enhanced Fast
Dormancy

Meaning:Reserv
ed Switch. The
para reserved for
further change
request use.
Disuse
statement: This
parameter is
used
temporarily in
patch versions
and will be
replaced with a
new parameter
in later versions.
The new
parameter ID
reflects the
parameter
function.
Therefore, this
parameter is not
recommended
for the
configuration
interface.

MOD
UIMEITAC

GUI Value
Range:RESER
VED_SWITCH
_BIT1,
RESERVED_S
WITCH_BIT2,
RESERVED_S
WITCH_BIT3,
RESERVED_S
WITCH_BIT4,
RESERVED_S
WITCH_BIT5,
RESERVED_S
WITCH_BIT6,
RESERVED_S
WITCH_BIT7,
RESERVED_S
WITCH_BIT8,
RESERVED_S
WITCH_BIT9,
RESERVED_S

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

37

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
WITCH_BIT10
,
RESERVED_S
WITCH_BIT11
,
RESERVED_S
WITCH_BIT12
,
RESERVED_S
WITCH_BIT13
,
RESERVED_S
WITCH_BIT14
,
RESERVED_S
WITCH_BIT15
,
RESERVED_S
WITCH_BIT16
,
RESERVED_S
WITCH_BIT17
,
RESERVED_S
WITCH_BIT18
,
RESERVED_S
WITCH_BIT19
,
RESERVED_S
WITCH_BIT20
,
RESERVED_S
WITCH_BIT21
,
RESERVED_S
WITCH_BIT22
,
RESERVED_S
WITCH_BIT23
,
RESERVED_S
WITCH_BIT24
,
RESERVED_S
WITCH_BIT25
,
RESERVED_S

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

38

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
WITCH_BIT26
,
RESERVED_S
WITCH_BIT27
,
RESERVED_S
WITCH_BIT28
,
RESERVED_S
WITCH_BIT29
,
RESERVED_S
WITCH_BIT30
,
RESERVED_S
WITCH_BIT31
,
RESERVED_S
WITCH_BIT32
Unit:None
Actual Value
Range:RESER
VED_SWITCH
_BIT1,
RESERVED_S
WITCH_BIT2,
RESERVED_S
WITCH_BIT3,
RESERVED_S
WITCH_BIT4,
RESERVED_S
WITCH_BIT5,
RESERVED_S
WITCH_BIT6,
RESERVED_S
WITCH_BIT7,
RESERVED_S
WITCH_BIT8,
RESERVED_S
WITCH_BIT9,
RESERVED_S
WITCH_BIT10
,
RESERVED_S
WITCH_BIT11
,
RESERVED_S

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

39

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
WITCH_BIT12
,
RESERVED_S
WITCH_BIT13
,
RESERVED_S
WITCH_BIT14
,
RESERVED_S
WITCH_BIT15
,
RESERVED_S
WITCH_BIT16
,
RESERVED_S
WITCH_BIT17
,
RESERVED_S
WITCH_BIT18
,
RESERVED_S
WITCH_BIT19
,
RESERVED_S
WITCH_BIT20
,
RESERVED_S
WITCH_BIT21
,
RESERVED_S
WITCH_BIT22
,
RESERVED_S
WITCH_BIT23
,
RESERVED_S
WITCH_BIT24
,
RESERVED_S
WITCH_BIT25
,
RESERVED_S
WITCH_BIT26
,
RESERVED_S
WITCH_BIT27
,
RESERVED_S

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

40

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
WITCH_BIT28
,
RESERVED_S
WITCH_BIT29
,
RESERVED_S
WITCH_BIT30
,
RESERVED_S
WITCH_BIT31
,
RESERVED_S
WITCH_BIT32
Default
Value:RESERV
ED_SWITCH_
BIT1:0,RESER
VED_SWITCH
_BIT2:0,RESE
RVED_SWITC
H_BIT3:0,RES
ERVED_SWIT
CH_BIT4:0,RE
SERVED_SWI
TCH_BIT5:0,R
ESERVED_SW
ITCH_BIT6:0,
RESERVED_S
WITCH_BIT7:
0,RESERVED_
SWITCH_BIT8
:
0,RESERVED_
SWITCH_BIT9
:
0,RESERVED_
SWITCH_BIT1
0:0,RESERVE
D_SWITCH_BI
T11:0,RESERV
ED_SWITCH_
BIT12:0,RESE
RVED_SWITC
H_BIT13:0,RE
SERVED_SWI
TCH_BIT14:0,
RESERVED_S

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

41

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
WITCH_BIT15
:
0,RESERVED_
SWITCH_BIT1
6:0,RESERVE
D_SWITCH_BI
T17:0,RESERV
ED_SWITCH_
BIT18:0,RESE
RVED_SWITC
H_BIT19:0,RE
SERVED_SWI
TCH_BIT20:0,
RESERVED_S
WITCH_BIT21
:
0,RESERVED_
SWITCH_BIT2
2:0,RESERVE
D_SWITCH_BI
T23:0,RESERV
ED_SWITCH_
BIT24:0,RESE
RVED_SWITC
H_BIT25:0,RE
SERVED_SWI
TCH_BIT26:0,
RESERVED_S
WITCH_BIT27
:
0,RESERVED_
SWITCH_BIT2
8:0,RESERVE
D_SWITCH_BI
T29:0,RESERV
ED_SWITCH_
BIT30:0,RESE
RVED_SWITC
H_BIT31:0,RE
SERVED_SWI
TCH_BIT32:0

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

42

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

DtxCycle2

BSC6900

SET
UDTXDRXPA
RA

WRFD-010686

CPC - DTX /
DRX

Meaning:Size of
patterns, that is,
the number of
subframes that
can be
transmitted on
the UL DPCCH.
For details about
this parameter,
see 3GPP TS
25.214.
GUI Value
Range:D4, D5,
D8, D10, D16,
D20, D32, D40,
D64, D80,
D128, D160
Unit:None
Actual Value
Range:4, 5, 8,
10, 16, 20, 32,
40, 64, 80, 128,
160
Default
Value:D20

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

43

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

DtxCycle2

BSC6910

SET
UDTXDRXPA
RA

WRFD-010686

CPC - DTX /
DRX

Meaning:Size of
patterns, that is,
the number of
subframes that
can be
transmitted on
the UL DPCCH.
For details about
this parameter,
see 3GPP TS
25.214.
GUI Value
Range:D4, D5,
D8, D10, D16,
D20, D32, D40,
D64, D80,
D128, D160
Unit:None
Actual Value
Range:4, 5, 8,
10, 16, 20, 32,
40, 64, 80, 128,
160
Default
Value:D20

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

44

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

HspaPlusSwitch

BSC6900

ADD
UCELLALGOS
WITCH

WRFD-010699

DC-HSDPA
+MIMO

Meaning:This
parameter is
used to select a
feature related to
HSPA+. If a
feature is
selected, it
indicates that the
corresponding
algorithm is
enabled. If a
feature is not
selected, it
indicates that the
corresponding
algorithm is
disabled. Note
that other factors
such as license
and the physical
capability of
NodeB restrict
whether a
feature can be
used even if this
feature is
selected. The
EFACH/MIMO
switch
determines
whether the cell
supports the EFACH/MIMO
feature but does
not affect the
establishment of
the E-FACH and
the MIMO cell.
1. 64QAM:
When the switch
is on, 64QAM
can be
configured for
the HSDPA
service. 2.
MIMO: When
the switch is on,
MIMO can be

MOD
UCELLALGOS
WITCH

WRFD-010401
WRFD-010504
WRFD-010693
WRFD-010695
WRFD-010694
WRFD-010697
WRFD-010696

Background
QoS Class
DL 64QAM
+MIMO

WRFD-010501

UL Layer 2
Improvement

WRFD-010615
01

UL 16QAM

WRFD-150250

E-DPCCH
Boosting

WRFD-010610
08

DC-HSDPA

WRFD-010612
06
WRFD-140204
WRFD-010609
01
WRFD-010609
03
WRFD-010609
02

Conversational
QoS Class
Combination of
Two PS
Services
3C-HSDPA
Interactive and
Background
Traffic Class on
HSDPA

WRFD-010609

Interactive and
Background
Traffic Class on
HSUPA

WRFD-010510

DC-HSUPA

WRFD-010688

Combination of
Two CS
Services
(Except for Two
AMR Speech
Services)

WRFD-010702
WRFD-010701

WRFD-010686
WRFD-010687
WRFD-010684
WRFD-010685
WRFD-010683
WRFD-021000
WRFD-010503
WRFD-010615
02
Issue Draft A (2014-01-20)

System
Information
Broadcasting

Combination of
Two CS
Services and
One PS Service
(Except for Two
AMR Speech
Services)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

45

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description

WRFD-010615
03

Combination of
One CS Service
and One PS
Service

configured for
the HSDPA
service.The
MIMO switch
determines
whether the cell
supports the
MIMO feature
but does not
affect the
establishment of
the the MIMO
cell. 3.
E_FACH: When
the switch is on,
E_FACH can be
configured for
the HSDPA
service.The
E_FACH switch
determines
whether the cell
supports the
E_FACH
feature but does
not affect the
establishment of
the the MIMO
cell. 4.
DTX_DRX:
When the switch
is on,
DTX_DRX can
be configured
for the HSPA
service. 5.
HS_SCCH_LE
SS_OPERATIO
N: When the
switch is on, HSSCCH Less
Operation can
be configured
for the HSPA
service. 6.
DL_L2ENHAN
CED: When the
switch is on,

WRFD-010502
WRFD-010615
04
WRFD-010615
05
WRFD-022000
WRFD-150207
WRFD-150227
WRFD-150208
WRFD-150223
WRFD-020900
WRFD-150209
WRFD-010615
WRFD-010632
WRFD-010630

Enhanced DRX
Uplink
Enhanced
CELL_FACH
Multiple RAB
Introduction
Package (PS
RAB < 2)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release
Downlink
Enhanced
CELL_FACH
CPC - DTX /
DRX
CPC - HSSCCH less
operation
2x2 MIMO
Downlink
Enhanced L2
Downlink
64QAM
Transport
Channel
Management
Interactive QoS
Class
Combination of
One CS Service
and Two PS
Services
Combination of
Three PS
Services

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

46

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description

Streaming QoS
Class

DL_L2ENHAN
CED can be
configured for
the HSDPA
service. 7.
64QAM_MIM
O: When the
switch is on and
the switches for
64QAM and
MIMO are on,
64QAM
+MIMO can be
configured for
the HSDPA
service 8.
UL_16QAM:
When the switch
is on, 16QAM
can be
configured for
the HSUPA
service. 9.
DC_HSDPA:
When the switch
is on, DC can be
configured for
the HSDPA
service. 10.
UL_L2ENHAN
CED: When the
switch is on,
UL_L2ENHAN
CED can be
configured for
the HSUPA
service. 11.
EDPCCH_BOO
STING: When
the switch is on,
Boosting can be
configured for
the HSUPA
service. 12.
DCMIMO_HS
DPA: When this
switch is turned
on, DC+MIMO

Combination of
One CS Service
and Three PS
Services
Combination of
Four PS
Services
Physical
Channel
Management
4C-HSDPA
DB-HSDPA
+MIMO
Flexible Dual
Carrier HSDPA
MC-HSDPA
+MIMO
Logical Channel
Management
DB-HSDPA
Multiple RAB
Package(PS
RAB >= 2)
Streaming
Traffic Class on
HSUPA
Streaming
Traffic Class on
HSDPA

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

47

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
can be
configured for
the HSDPA
service. 13.
E_DRX: When
the switch is on,
E_DRX can be
configured for
the HSUPA
service. 14.
DC_HSUPA:
When this
switch is turned
on, the DCHSUPA
function can be
enabled for
HSUPA
services. 15.
HSDPA_4C_M
IMO: Whether
the MC-HSDPA
+MIMO feature
is allowed for
HSDPA
services. When
this switch is
turned on, the
MC-HSDPA
+MIMO (3CHSDPA
+MIMO and
4C-HSDPA
+MIMO)
feature is
allowed for
HSDPA
services. 16.
HSDPA_4C:
Whether the 3CHSDPA or 4CHSDPA feature
is allowed for
HSDPA
services. When
this switch is
turned on, the
3C-HSDPA or

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

48

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
4C-HSDPA
feature is
allowed for
HSDPA
services. 17.
DBMIMO_HS
DPA: Whether
the DB-HSDPA
+MIMO feature
is allowed for
HSDPA
services. When
this switch is
turned on, the
DB-HSDPA
+MIMO feature
is allowed for
HSDPA
services. 18.
DB_HSDPA:
Whether the
DB-HSDPA
feature is
allowed for
HSDPA
services. When
this switch is
turned on, the
DB-HSDPA
feature is
allowed for
HSDPA
services.
GUI Value
Range:64QAM
(Cell 64QAM
Function
Switch), MIMO
(Cell MIMO
Function
Switch),
E_FACH(Cell
E_FACH
Function
Switch),
DTX_DRX
(Cell

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

49

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
DTX_DRX
Function
Switch),
HS_SCCH_LE
SS_OPERATIO
N(Cell
HS_SCCH
LESS
OPERATION
Function
Switch),
DL_L2ENHAN
CED(Cell DL
L2ENHANCED
Function
Switch),
64QAM_MIM
O(Cell 64QAM
+MIMO
Function
Switch),
UL_16QAM
(Cell UL
16QAM
Function
Switch),
DC_HSDPA
(Cell DCHSDPA
Function
Switch),
UL_L2ENHAN
CED(Cell UL
L2ENHANCED
Function
Switch),
EDPCCH_BOO
STING(Cell EDPCCH
Boosting
Function
Switch),
DCMIMO_HS
DPA(Cell DCHSDPA
Combined with
MIMO Function
Switch),

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

50

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
E_DRX
(Enhanced
Discontinuous
Reception
Function
Switch),
DC_HSUPA
(Cell DCHSUPA
Function
Switch),
HSDPA_4C_M
IMO(4CHSDPA
+MIMO
Function
Switch),
HSDPA_4C
(4C-HSDPA
Function
Switch),
DBMIMO_HS
DPA(DBHSDPA
+MIMO
Function
Switch),
DB_HSDPA
(DB-HSDPA
Function
Switch)
Unit:None
Actual Value
Range:64QAM,
MIMO,
E_FACH,
DTX_DRX,
HS_SCCH_LE
SS_OPERATIO
N,
DL_L2ENHAN
CED,
64QAM_MIM
O, UL_16QAM,
DC_HSDPA,
UL_L2ENHAN
CED,

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

51

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
EDPCCH_BOO
STING,
DCMIMO_HS
DPA, E_DRX,
DC_HSUPA,
HSDPA_4C_M
IMO,
HSDPA_4C,
DBMIMO_HS
DPA,
DB_HSDPA
Default Value:
64QAM:
0,MIMO:
0,E_FACH:
0,DTX_DRX:
0,HS_SCCH_L
ESS_OPERATI
ON:
0,DL_L2ENHA
NCED:
0,64QAM_MI
MO:
0,UL_16QAM:
0,DC_HSDPA:
0,UL_L2ENHA
NCED:
0,EDPCCH_BO
OSTING:
0,DCMIMO_H
SDPA:
0,E_DRX:
0,DC_HSUPA:
0,HSDPA_4C_
MIMO:
0,HSDPA_4C:
0,DBMIMO_H
SDPA:
0,DB_HSDPA:
0

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

52

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

HspaPlusSwitch

BSC6910

ADD
UCELLALGOS
WITCH

WRFD-010699

DC-HSDPA
+MIMO

Meaning:This
parameter is
used to select a
feature related to
HSPA+. If a
feature is
selected, it
indicates that the
corresponding
algorithm is
enabled. If a
feature is not
selected, it
indicates that the
corresponding
algorithm is
disabled. Note
that other factors
such as license
and the physical
capability of
NodeB restrict
whether a
feature can be
used even if this
feature is
selected. The
EFACH/MIMO
switch
determines
whether the cell
supports the EFACH/MIMO
feature but does
not affect the
establishment of
the E-FACH and
the MIMO cell.
1. 64QAM:
When the switch
is on, 64QAM
can be
configured for
the HSDPA
service. 2.
MIMO: When
the switch is on,
MIMO can be

MOD
UCELLALGOS
WITCH

WRFD-010401
WRFD-010504
WRFD-010693
WRFD-010695
WRFD-010694
WRFD-010697
WRFD-010696

Background
QoS Class
DL 64QAM
+MIMO

WRFD-010501

UL Layer 2
Improvement

WRFD-010615
01

UL 16QAM

WRFD-150250

E-DPCCH
Boosting

WRFD-010610
08

DC-HSDPA

WRFD-010612
06
WRFD-140204
WRFD-010609
01
WRFD-010609
03
WRFD-010609
02

Conversational
QoS Class
Combination of
Two PS
Services
3C-HSDPA
Interactive and
Background
Traffic Class on
HSDPA

WRFD-010609

Interactive and
Background
Traffic Class on
HSUPA

WRFD-010510

DC-HSUPA

WRFD-010688

Combination of
Two CS
Services
(Except for Two
AMR Speech
Services)

WRFD-010702
WRFD-010701

WRFD-010686
WRFD-010687
WRFD-010684
WRFD-010685
WRFD-010683
WRFD-021000
WRFD-010503
WRFD-010615
02
Issue Draft A (2014-01-20)

System
Information
Broadcasting

Combination of
Two CS
Services and
One PS Service
(Except for Two
AMR Speech
Services)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

53

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description

WRFD-010615
03

Combination of
One CS Service
and One PS
Service

configured for
the HSDPA
service.The
MIMO switch
determines
whether the cell
supports the
MIMO feature
but does not
affect the
establishment of
the the MIMO
cell. 3.
E_FACH: When
the switch is on,
E_FACH can be
configured for
the HSDPA
service.The
E_FACH switch
determines
whether the cell
supports the
E_FACH
feature but does
not affect the
establishment of
the the MIMO
cell. 4.
DTX_DRX:
When the switch
is on,
DTX_DRX can
be configured
for the HSPA
service. 5.
HS_SCCH_LE
SS_OPERATIO
N: When the
switch is on, HSSCCH Less
Operation can
be configured
for the HSPA
service. 6.
DL_L2ENHAN
CED: When the
switch is on,

WRFD-010502
WRFD-010615
04
WRFD-010615
05
WRFD-022000
WRFD-150207
WRFD-150227
WRFD-150208
WRFD-150223
WRFD-020900
WRFD-150209
WRFD-010615
WRFD-010632
WRFD-010630

Enhanced DRX
Uplink
Enhanced
CELL_FACH
Multiple RAB
Introduction
Package (PS
RAB < 2)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release
Downlink
Enhanced
CELL_FACH
CPC - DTX /
DRX
CPC - HSSCCH less
operation
2x2 MIMO
Downlink
Enhanced L2
Downlink
64QAM
Transport
Channel
Management
Interactive QoS
Class
Combination of
One CS Service
and Two PS
Services
Combination of
Three PS
Services

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

54

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description

Streaming QoS
Class

DL_L2ENHAN
CED can be
configured for
the HSDPA
service. 7.
64QAM_MIM
O: When the
switch is on and
the switches for
64QAM and
MIMO are on,
64QAM
+MIMO can be
configured for
the HSDPA
service 8.
UL_16QAM:
When the switch
is on, 16QAM
can be
configured for
the HSUPA
service. 9.
DC_HSDPA:
When the switch
is on, DC can be
configured for
the HSDPA
service. 10.
UL_L2ENHAN
CED: When the
switch is on,
UL_L2ENHAN
CED can be
configured for
the HSUPA
service. 11.
EDPCCH_BOO
STING: When
the switch is on,
Boosting can be
configured for
the HSUPA
service. 12.
DCMIMO_HS
DPA: When this
switch is turned
on, DC+MIMO

Combination of
One CS Service
and Three PS
Services
Combination of
Four PS
Services
Physical
Channel
Management
4C-HSDPA
DB-HSDPA
+MIMO
Flexible Dual
Carrier HSDPA
MC-HSDPA
+MIMO
Logical Channel
Management
DB-HSDPA
Multiple RAB
Package(PS
RAB >= 2)
Streaming
Traffic Class on
HSUPA
Streaming
Traffic Class on
HSDPA

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

55

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
can be
configured for
the HSDPA
service. 13.
E_DRX: When
the switch is on,
E_DRX can be
configured for
the HSUPA
service. 14.
DC_HSUPA:
When this
switch is turned
on, the DCHSUPA
function can be
enabled for
HSUPA
services. 15.
HSDPA_4C_M
IMO: Whether
the MC-HSDPA
+MIMO feature
is allowed for
HSDPA
services. When
this switch is
turned on, the
MC-HSDPA
+MIMO (3CHSDPA
+MIMO and
4C-HSDPA
+MIMO)
feature is
allowed for
HSDPA
services. 16.
HSDPA_4C:
Whether the 3CHSDPA or 4CHSDPA feature
is allowed for
HSDPA
services. When
this switch is
turned on, the
3C-HSDPA or

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

56

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
4C-HSDPA
feature is
allowed for
HSDPA
services. 17.
DBMIMO_HS
DPA: Whether
the DB-HSDPA
+MIMO feature
is allowed for
HSDPA
services. When
this switch is
turned on, the
DB-HSDPA
+MIMO feature
is allowed for
HSDPA
services. 18.
DB_HSDPA:
Whether the
DB-HSDPA
feature is
allowed for
HSDPA
services. When
this switch is
turned on, the
DB-HSDPA
feature is
allowed for
HSDPA
services.
GUI Value
Range:64QAM
(Cell 64QAM
Function
Switch), MIMO
(Cell MIMO
Function
Switch),
E_FACH(Cell
E_FACH
Function
Switch),
DTX_DRX
(Cell

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

57

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
DTX_DRX
Function
Switch),
HS_SCCH_LE
SS_OPERATIO
N(Cell
HS_SCCH
LESS
OPERATION
Function
Switch),
DL_L2ENHAN
CED(Cell DL
L2ENHANCED
Function
Switch),
64QAM_MIM
O(Cell 64QAM
+MIMO
Function
Switch),
UL_16QAM
(Cell UL
16QAM
Function
Switch),
DC_HSDPA
(Cell DCHSDPA
Function
Switch),
UL_L2ENHAN
CED(Cell UL
L2ENHANCED
Function
Switch),
EDPCCH_BOO
STING(Cell EDPCCH
Boosting
Function
Switch),
DCMIMO_HS
DPA(Cell DCHSDPA
Combined with
MIMO Function
Switch),

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

58

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
E_DRX
(Enhanced
Discontinuous
Reception
Function
Switch),
DC_HSUPA
(Cell DCHSUPA
Function
Switch),
HSDPA_4C_M
IMO(4CHSDPA
+MIMO
Function
Switch),
HSDPA_4C
(4C-HSDPA
Function
Switch),
DBMIMO_HS
DPA(DBHSDPA
+MIMO
Function
Switch),
DB_HSDPA
(DB-HSDPA
Function
Switch)
Unit:None
Actual Value
Range:64QAM,
MIMO,
E_FACH,
DTX_DRX,
HS_SCCH_LE
SS_OPERATIO
N,
DL_L2ENHAN
CED,
64QAM_MIM
O, UL_16QAM,
DC_HSDPA,
UL_L2ENHAN
CED,

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

59

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
EDPCCH_BOO
STING,
DCMIMO_HS
DPA, E_DRX,
DC_HSUPA,
HSDPA_4C_M
IMO,
HSDPA_4C,
DBMIMO_HS
DPA,
DB_HSDPA
Default Value:
64QAM:
0,MIMO:
0,E_FACH:
0,DTX_DRX:
0,HS_SCCH_L
ESS_OPERATI
ON:
0,DL_L2ENHA
NCED:
0,64QAM_MI
MO:
0,UL_16QAM:
0,DC_HSDPA:
0,UL_L2ENHA
NCED:
0,EDPCCH_BO
OSTING:
0,DCMIMO_H
SDPA:
0,E_DRX:
0,DC_HSUPA:
0,HSDPA_4C_
MIMO:
0,HSDPA_4C:
0,DBMIMO_H
SDPA:
0,DB_HSDPA:
0

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

60

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

CfgSwitch

BSC6900

SET
UCORRMALG
OSWITCH

WRFD-010699

DC-HSDPA
+MIMO

Meaning:Chann
el configuration
strategy switch
group. 1.
CFG_DC_MIM
O_DYNAMIC_
SELECT_SWIT
CH: When this
switch is turned
on, the RNC
determines
whether to
enable the DCHSDPA or
MIMO feature
for a newly
admitted user
based on the cell
load and the
number of
HSDPA users.
2.
CFG_DL_BLIN
D_DETECTIO
N_SWITCH:
When the switch
is on, the DL
blind transport
format detection
function is used
for single SRB
and AMR+SRB
bearers. Note
that the UE is
only required to
support the blind
transport format
stipulated in
3GPP 25.212
section 4.3.1. 3.
CFG_EDPCCH
_BOOSTING_S
WITCH: When
the switch is on,
Boosting can be
configured for
the HSUPA
service. 4.

WRFD-010693
WRFD-010694
WRFD-010697
WRFD-010696
WRFD-150250
WRFD-010101
WRFD-010510
WRFD-011500
WRFD-010686
WRFD-010687
WRFD-010684
WRFD-010683
WRFD-010615
02
WRFD-010615
03

DL 64QAM
+MIMO
UL 16QAM
E-DPCCH
Boosting
DC-HSDPA
3C-HSDPA
3GPP R9
Specifications
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010615
01

PDCP Header
Compression
(RFC2507)

WRFD-010615
04

CPC - DTX /
DRX

WRFD-150207

CPC - HSSCCH less

operation

WRFD-150227
WRFD-020605
04
WRFD-150223
WRFD-150209
WRFD-010615
WRFD-010617
WRFD-020134

2x2 MIMO
Downlink
64QAM
Combination of
One CS Service
and Two PS
Services
Combination of
Three PS
Services
Combination of
Two PS
Services
Combination of
One CS Service
and Three PS
Services

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

61

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description

4C-HSDPA

CFG_FREE_U
SER_SWITCH:
When this
switch is turned
on, special
handling for free
access user is
enabled. 5.
CFG_HSDPA_
64QAM_SWIT
CH: When the
switch is on,
64QAM can be
configured for
the HSDPA
service. 6.
CFG_HSDPA_
DCMIMO_SWI
TCH: When this
switch is turned
on, DC+MIMO
can be
configured for
the HSDPA
service. 7.
CFG_HSDPA_
DC_SWITCH:
When the switch
is on, DC can be
configured for
the HSDPA
service. 8.
CFG_HSDPA_
MIMO_SWITC
H: When the
switch is on,
MIMO can be
configured for
the HSDPA
service. 9.
CFG_HSDPA_
MIMO_WITH_
64QAM_SWIT
CH: When the
switch is on and
the switches for
64QAM and
MIMO are on,

DB-HSDPA
+MIMO
Lossless SRNS
Relocation
MC-HSDPA
+MIMO
DB-HSDPA
Multiple RAB
Package(PS
RAB >= 2)
VoIP over
HSPA/HSPA+
Push to Talk

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

62

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
64QAM
+MIMO can be
configured for
the HSDPA
service 10.
CFG_HSDPA_
4C_MIMO_SW
ITCH: Whether
the 4C-HSDPA
+MIMO feature
is allowed for
HSDPA
services. When
this switch is
turned on, the
MC-HSDPA
+MIMO (4CHSDPA
+MIMO and
3C-HSDPA
+MIMO)
feature is
allowed for
HSDPA
services. 11.
CFG_HSDPA_
4C_SWITCH:
Whether the 3CHSDPA or 4CHSDPA feature
is allowed for
HSDPA
services. When
this switch is
turned on, the
3C-HSDPA or
4C-HSDPA
feature is
allowed for
HSDPA
services. 12.
CFG_HSDPA_
DBMIMO_SWI
TCH: Whether
the DB-HSDPA
+MIMO feature
is allowed for
HSDPA

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

63

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
services. When
this switch is
turned on, the
DB-HSDPA
+MIMO feature
is allowed for
HSDPA
services. 13.
CFG_HSDPA_
DB_SWITCH:
Whether the
DB-HSDPA
feature is
allowed for
HSDPA
services. When
this switch is
turned on, the
DB-HSDPA
feature is
allowed for
HSDPA
services. 14.
CFG_HSPA_D
TX_DRX_SWI
TCH: When the
switch is on,
DTX_DRX can
be configured
for the HSPA
service. 15.
CFG_HSPA_H
SSCCH_LESS_
OP_SWITCH:
When the switch
is on, HS-SCCH
Less Operation
can be
configured for
the HSPA
service. 16.
CFG_HSUPA_
16QAM_SWIT
CH: When the
switch is on,
16QAM can be
configured for
the HSUPA

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

64

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
service. 17.
CFG_HSUPA_
DC_SWITCH:
When this
switch is turned
on, the DCHSUPA
function can be
enabled for
HSUPA
services. 18.
CFG_IMS_SUP
PORT_SWITC
H: When the
switch is on and
the IMS license
is activated, the
RNC supports
IMS signaling.
19.
CFG_LOSSLE
SS_DLRLC_P
DUSIZECHG_
SWITCH:
Whether the
UTRAN
supports the
function of
lossless RLC
PDU size
change. When
this switch is
turned on,
downlink
channel
reconfiguration
between the
DCH and HSDSCH does not
cause RLC PDU
size change
which results in
packet loss. This
function takes
effect only on
the UEs enabled
with this
function. For

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

65

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
details about this
function, see
3GPP TS
25.331. 20.
CFG_LOSSLE
SS_RELOC_CF
G_SWITCH:
When the switch
is on and the UE
supports lossless
relocation, the
RNC configures
lossless
relocation for
PDCP
parameters if the
requirements of
RLC mode,
discard mode,
and sequential
submission are
met. Then,
lossless
relocation is
used for the UE.
21.
CFG_MULTI_
RAB_SWITCH
: When the
switch is on, the
RNC supports
multi-RABs
combinations
such as 2CS,
2CS+1PS, 1CS
+2PS, and 2PS.
22.
CFG_PDCP_IP
V6_HEAD_CO
MPRESS_SWI
TCH: When the
switch is on and
the PDCP
Header
compression
license is
activated, the
PDCP header

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

66

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
compression
algorithm for
IPv6 is used at
the RNC. 23.
CFG_PDCP_R
FC2507_HC_S
WITCH: When
the switch is on
and the PDCP
Header
compression
license is
activated, the
PDCP RFC2507
header
compression
algorithm is
used for the
RNC. 24.
CFG_PDCP_R
FC3095_HC_S
WITCH: When
the switch is on
and the PDCP
ROHC license is
activated, the
PDCP RFC3095
header
compression
algorithm is
used for the
RNC. 25.
CFG_PTT_SWI
TCH: When this
switch is on, the
RNC identifies
the PTT user
based on the
QoS attributes in
the RAB
assignment
request
message. Then,
the PTT users
are subject to
special
processing. 26.
CFG_RAB_RE

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

67

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
L_RMV_HSPA
PLUS_SWITC
H: When this
switch is on and
if an RAB
release is
performed, the
RNC decides
whether to fall
back a certain
HSPA(HSPA+)
feature based on
the requirement
of remaining
traffic carried by
the UE. That is,
if an HSPA+
feature is
required by the
previously
released RAB
connection but
is not required in
the initial bearer
policy of the
remaining
traffic, the RNC
falls back the
feature to save
the transmission
resources. The
HSPA+ features
that support the
fallback are
MIMO,
64QAM, MIMO
+64QAM, UL
16QAM, DCHSDPA, UL
TTI 2ms, and
DC-HSUPA.
27.
CFG_RCS_E_S
WITCH:
Indicates
whether to
enable the RCSe (Rich

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

68

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
Communication
Suit enhanced)
service that
supports voice
services carried
in the CS
domain and
video services
carried in the PS
domain. When
this switch is
turned off, the
RCS-e service is
disabled. When
this switch is
turned on, the
RCS-e service is
enabled. 28.
CFG_FACH_A
M_RLC_RETR
ANSMIT_PAR
A_SWITCH:
Switch for AM
RLC
retransmission
parameters for
UEs in the
CELL_FACH
state.When this
switch is turned
on, the
"TimerPoll" and
"NoDiscardMax
DAT"
parameters in
the "SET
UFACHCFGPA
RA" command
are used for the
AM RLC
retransmission
parameters
specific to PS
services and
SRBs.When this
switch is turned
off, the
"TimerPoll" and

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

69

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
"NoDiscardMax
DAT"
parameters in
the "ADD
UTYPSRBRLC
" command are
used for the AM
RLC
retransmission
parameters
specific to
SRBs. In
addition, the
"TimerPoll" and
"NoDiscardMax
DAT" in the
"ADD
UTYPRABRLC
" command are
used for the AM
RLC
retransmission
parameters
specific to PS
services. 29.
CFG_DCH_SR
B_AM_RLC_R
ETRANS_PAR
A_SWITCH:
Switch
controlling the
configuration
mode of AM
RLC SDU
retransmission
parameters for
UEs in the
CELL_DCH
state. When this
switch is turned
on and UEs in
the CELL_DCH
state, on the
RNC, the
transmitting side
of an AM RLC
entity uses the
values of the

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

70

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
"TimerPoll" and
"NoDiscardMax
DAT"
parameters in
the "ADD
UTYPSRBDCH
RNCRLC" or
"MOD
UTYPSRBDCH
RNCRLC"
command for
SDU
retransmission.
When this
switch is turned
off or UEs not in
the CELL_DCH
state, on the
RNC, the
transmitting side
uses the values
of these
parameters in
the "ADD
UTYPSRBRLC
" or "MOD
UTYPSRBRLC
" command for
SDU
retransmission.
GUI Value
Range:CFG_DL
_BLIND_DETE
CTION_SWIT
CH,
CFG_HSDPA_
64QAM_SWIT
CH,
CFG_HSDPA_
MIMO_SWITC
H,
CFG_HSPA_D
TX_DRX_SWI
TCH,
CFG_HSPA_H
SSCCH_LESS_
OP_SWITCH,

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

71

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
CFG_IMS_SUP
PORT_SWITC
H,
CFG_LOSSLE
SS_DLRLC_P
DUSIZECHG_
SWITCH,
CFG_LOSSLE
SS_RELOC_CF
G_SWITCH,
CFG_MULTI_
RAB_SWITCH
,
CFG_PDCP_IP
V6_HEAD_CO
MPRESS_SWI
TCH,
CFG_PDCP_R
FC2507_HC_S
WITCH,
CFG_PDCP_R
FC3095_HC_S
WITCH,
CFG_HSDPA_
MIMO_WITH_
64QAM_SWIT
CH,
CFG_HSDPA_
DC_SWITCH,
CFG_HSUPA_
16QAM_SWIT
CH,
CFG_RAB_RE
L_RMV_HSPA
PLUS_SWITC
H,
CFG_PTT_SWI
TCH,
CFG_EDPCCH
_BOOSTING_S
WITCH,
CFG_HSDPA_
DCMIMO_SWI
TCH,
CFG_FREE_U
SER_SWITCH,
CFG_DC_MIM
O_DYNAMIC_

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

72

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
SELECT_SWIT
CH,
CFG_HSUPA_
DC_SWITCH,
CFG_HSDPA_
4C_MIMO_SW
ITCH,
CFG_HSDPA_
4C_SWITCH,
CFG_HSDPA_
DBMIMO_SWI
TCH,
CFG_HSDPA_
DB_SWITCH,
CFG_RCS_E_S
WITCH,
CFG_FACH_A
M_RLC_RETR
ANSMIT_PAR
A_SWITCH,
CFG_DCH_SR
B_AM_RLC_R
ETRANS_PAR
A_SWITCH
Unit:None
Actual Value
Range:CFG_D
C_MIMO_DY
NAMIC_SELE
CT_SWITCH,
CFG_DL_BLIN
D_DETECTIO
N_SWITCH,
CFG_EDPCCH
_BOOSTING_S
WITCH,
CFG_FREE_U
SER_SWITCH,
CFG_HSDPA_
64QAM_SWIT
CH,
CFG_HSDPA_
DCMIMO_SWI
TCH,
CFG_HSDPA_
DC_SWITCH,
CFG_HSDPA_

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

73

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
MIMO_SWITC
H,
CFG_HSDPA_
MIMO_WITH_
64QAM_SWIT
CH,
CFG_HSDPA_
4C_MIMO_SW
ITCH,
CFG_HSDPA_
4C_SWITCH,
CFG_HSDPA_
DBMIMO_SWI
TCH,
CFG_HSDPA_
DB_SWITCH,
CFG_HSPA_D
TX_DRX_SWI
TCH,
CFG_HSPA_H
SSCCH_LESS_
OP_SWITCH,
CFG_HSUPA_
16QAM_SWIT
CH,
CFG_HSUPA_
DC_SWITCH,
CFG_IMS_SUP
PORT_SWITC
H,
CFG_LOSSLE
SS_DLRLC_P
DUSIZECHG_
SWITCH,
CFG_LOSSLE
SS_RELOC_CF
G_SWITCH,
CFG_MULTI_
RAB_SWITCH
,
CFG_PDCP_IP
V6_HEAD_CO
MPRESS_SWI
TCH,
CFG_PDCP_R
FC2507_HC_S
WITCH,
CFG_PDCP_R

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

74

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
FC3095_HC_S
WITCH,
CFG_PTT_SWI
TCH,
CFG_RAB_RE
L_RMV_HSPA
PLUS_SWITC
H,
CFG_RCS_E_S
WITCH,
CFG_FACH_A
M_RLC_RETR
ANSMIT_PAR
A_SWITCH,
CFG_DCH_SR
B_AM_RLC_R
ETRANS_PAR
A_SWITCH
Default
Value:CFG_DC
_MIMO_DYN
AMIC_SELEC
T_SWITCH:
0,CFG_DL_BL
IND_DETECTI
ON_SWITCH:
1,CFG_EDPCC
H_BOOSTING
_SWITCH:
0,CFG_FREE_
USER_SWITC
H:
0,CFG_HSDPA
_64QAM_SWI
TCH:
1,CFG_HSDPA
_DCMIMO_S
WITCH:
0,CFG_HSDPA
_DC_SWITCH:
0,CFG_HSDPA
_MIMO_SWIT
CH:
1,CFG_HSDPA
_MIMO_WITH
_64QAM_SWI
TCH:

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

75

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
0,CFG_HSDPA
_4C_MIMO_S
WITCH:
0,CFG_HSDPA
_4C_SWITCH:
0,CFG_HSDPA
_DBMIMO_S
WITCH:
0,CFG_HSDPA
_DB_SWITCH:
0,CFG_HSPA_
DTX_DRX_S
WITCH:
0,CFG_HSPA_
HSSCCH_LES
S_OP_SWITC
H:
0,CFG_HSUPA
_16QAM_SWI
TCH:
0,CFG_HSUPA
_DC_SWITCH:
0,CFG_IMS_S
UPPORT_SWI
TCH:
1,CFG_LOSSL
ESS_DLRLC_P
DUSIZECHG_
SWITCH:
0,CFG_LOSSL
ESS_RELOC_
CFG_SWITCH:
0,CFG_MULTI
_RAB_SWITC
H:
1,CFG_PDCP_I
PV6_HEAD_C
OMPRESS_SW
ITCH:
0,CFG_PDCP_
RFC2507_HC_
SWITCH:
0,CFG_PDCP_
RFC3095_HC_
SWITCH:
0,CFG_PTT_S
WITCH:
0,CFG_RAB_R

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

76

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
EL_RMV_HSP
APLUS_SWIT
CH:
0,CFG_RCS_E
_SWITCH:
0,CFG_FACH_
AM_RLC_RET
RANSMIT_PA
RA_SWITCH:
0,CFG_DCH_S
RB_AM_RLC_
RETRANS_PA
RA_SWITCH:0

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

77

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

CfgSwitch

BSC6910

SET
UCORRMALG
OSWITCH

WRFD-010699

DC-HSDPA
+MIMO

Meaning:Chann
el configuration
strategy switch
group. 1.
CFG_DC_MIM
O_DYNAMIC_
SELECT_SWIT
CH: When this
switch is turned
on, the RNC
determines
whether to
enable the DCHSDPA or
MIMO feature
for a newly
admitted user
based on the cell
load and the
number of
HSDPA users.
2.
CFG_DL_BLIN
D_DETECTIO
N_SWITCH:
When the switch
is on, the DL
blind transport
format detection
function is used
for single SRB
and AMR+SRB
bearers. Note
that the UE is
only required to
support the blind
transport format
stipulated in
3GPP 25.212
section 4.3.1. 3.
CFG_EDPCCH
_BOOSTING_S
WITCH: When
the switch is on,
Boosting can be
configured for
the HSUPA
service. 4.

WRFD-010693
WRFD-010694
WRFD-010697
WRFD-010696
WRFD-150250
WRFD-010101
WRFD-010510
WRFD-011500
WRFD-010686
WRFD-010687
WRFD-010684
WRFD-010683
WRFD-010615
02
WRFD-010615
03

DL 64QAM
+MIMO
UL 16QAM
E-DPCCH
Boosting
DC-HSDPA
3C-HSDPA
3GPP R9
Specifications
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010615
01

PDCP Header
Compression
(RFC2507)

WRFD-010615
04

CPC - DTX /
DRX

WRFD-150207

CPC - HSSCCH less

operation

WRFD-150227
WRFD-020605
04
WRFD-150223
WRFD-150209
WRFD-010615
WRFD-010617
WRFD-020134

2x2 MIMO
Downlink
64QAM
Combination of
One CS Service
and Two PS
Services
Combination of
Three PS
Services
Combination of
Two PS
Services
Combination of
One CS Service
and Three PS
Services

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

78

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description

4C-HSDPA

CFG_FREE_U
SER_SWITCH:
When this
switch is turned
on, special
handling for free
access user is
enabled. 5.
CFG_HSDPA_
64QAM_SWIT
CH: When the
switch is on,
64QAM can be
configured for
the HSDPA
service. 6.
CFG_HSDPA_
DCMIMO_SWI
TCH: When this
switch is turned
on, DC+MIMO
can be
configured for
the HSDPA
service. 7.
CFG_HSDPA_
DC_SWITCH:
When the switch
is on, DC can be
configured for
the HSDPA
service. 8.
CFG_HSDPA_
MIMO_SWITC
H: When the
switch is on,
MIMO can be
configured for
the HSDPA
service. 9.
CFG_HSDPA_
MIMO_WITH_
64QAM_SWIT
CH: When the
switch is on and
the switches for
64QAM and
MIMO are on,

DB-HSDPA
+MIMO
Lossless SRNS
Relocation
MC-HSDPA
+MIMO
DB-HSDPA
Multiple RAB
Package(PS
RAB >= 2)
VoIP over
HSPA/HSPA+
Push to Talk

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

79

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
64QAM
+MIMO can be
configured for
the HSDPA
service 10.
CFG_HSDPA_
4C_MIMO_SW
ITCH: Whether
the 4C-HSDPA
+MIMO feature
is allowed for
HSDPA
services. When
this switch is
turned on, the
MC-HSDPA
+MIMO (4CHSDPA
+MIMO and
3C-HSDPA
+MIMO)
feature is
allowed for
HSDPA
services. 11.
CFG_HSDPA_
4C_SWITCH:
Whether the 3CHSDPA or 4CHSDPA feature
is allowed for
HSDPA
services. When
this switch is
turned on, the
3C-HSDPA or
4C-HSDPA
feature is
allowed for
HSDPA
services. 12.
CFG_HSDPA_
DBMIMO_SWI
TCH: Whether
the DB-HSDPA
+MIMO feature
is allowed for
HSDPA

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

80

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
services. When
this switch is
turned on, the
DB-HSDPA
+MIMO feature
is allowed for
HSDPA
services. 13.
CFG_HSDPA_
DB_SWITCH:
Whether the
DB-HSDPA
feature is
allowed for
HSDPA
services. When
this switch is
turned on, the
DB-HSDPA
feature is
allowed for
HSDPA
services. 14.
CFG_HSPA_D
TX_DRX_SWI
TCH: When the
switch is on,
DTX_DRX can
be configured
for the HSPA
service. 15.
CFG_HSPA_H
SSCCH_LESS_
OP_SWITCH:
When the switch
is on, HS-SCCH
Less Operation
can be
configured for
the HSPA
service. 16.
CFG_HSUPA_
16QAM_SWIT
CH: When the
switch is on,
16QAM can be
configured for
the HSUPA

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

81

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
service. 17.
CFG_HSUPA_
DC_SWITCH:
When this
switch is turned
on, the DCHSUPA
function can be
enabled for
HSUPA
services. 18.
CFG_IMS_SUP
PORT_SWITC
H: When the
switch is on and
the IMS license
is activated, the
RNC supports
IMS signaling.
19.
CFG_LOSSLE
SS_DLRLC_P
DUSIZECHG_
SWITCH:
Whether the
UTRAN
supports the
function of
lossless RLC
PDU size
change. When
this switch is
turned on,
downlink
channel
reconfiguration
between the
DCH and HSDSCH does not
cause RLC PDU
size change
which results in
packet loss. This
function takes
effect only on
the UEs enabled
with this
function. For

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

82

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
details about this
function, see
3GPP TS
25.331. 20.
CFG_LOSSLE
SS_RELOC_CF
G_SWITCH:
When the switch
is on and the UE
supports lossless
relocation, the
RNC configures
lossless
relocation for
PDCP
parameters if the
requirements of
RLC mode,
discard mode,
and sequential
submission are
met. Then,
lossless
relocation is
used for the UE.
21.
CFG_MULTI_
RAB_SWITCH
: When the
switch is on, the
RNC supports
multi-RABs
combinations
such as 2CS,
2CS+1PS, 1CS
+2PS, and 2PS.
22.
CFG_PDCP_IP
V6_HEAD_CO
MPRESS_SWI
TCH: When the
switch is on and
the PDCP
Header
compression
license is
activated, the
PDCP header

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

83

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
compression
algorithm for
IPv6 is used at
the RNC. 23.
CFG_PDCP_R
FC2507_HC_S
WITCH: When
the switch is on
and the PDCP
Header
compression
license is
activated, the
PDCP RFC2507
header
compression
algorithm is
used for the
RNC. 24.
CFG_PDCP_R
FC3095_HC_S
WITCH: When
the switch is on
and the PDCP
ROHC license is
activated, the
PDCP RFC3095
header
compression
algorithm is
used for the
RNC. 25.
CFG_PTT_SWI
TCH: When this
switch is on, the
RNC identifies
the PTT user
based on the
QoS attributes in
the RAB
assignment
request
message. Then,
the PTT users
are subject to
special
processing. 26.
CFG_RAB_RE

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

84

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
L_RMV_HSPA
PLUS_SWITC
H: When this
switch is on and
if an RAB
release is
performed, the
RNC decides
whether to fall
back a certain
HSPA(HSPA+)
feature based on
the requirement
of remaining
traffic carried by
the UE. That is,
if an HSPA+
feature is
required by the
previously
released RAB
connection but
is not required in
the initial bearer
policy of the
remaining
traffic, the RNC
falls back the
feature to save
the transmission
resources. The
HSPA+ features
that support the
fallback are
MIMO,
64QAM, MIMO
+64QAM, UL
16QAM, DCHSDPA, UL
TTI 2ms, and
DC-HSUPA.
27.
CFG_RCS_E_S
WITCH:
Indicates
whether to
enable the RCSe (Rich

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

85

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
Communication
Suit enhanced)
service that
supports voice
services carried
in the CS
domain and
video services
carried in the PS
domain. When
this switch is
turned off, the
RCS-e service is
disabled. When
this switch is
turned on, the
RCS-e service is
enabled. 28.
CFG_FACH_A
M_RLC_RETR
ANSMIT_PAR
A_SWITCH:
Switch for AM
RLC
retransmission
parameters for
UEs in the
CELL_FACH
state.When this
switch is turned
on, the
"TimerPoll" and
"NoDiscardMax
DAT"
parameters in
the "SET
UFACHCFGPA
RA" command
are used for the
AM RLC
retransmission
parameters
specific to PS
services and
SRBs.When this
switch is turned
off, the
"TimerPoll" and

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

86

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
"NoDiscardMax
DAT"
parameters in
the "ADD
UTYPSRBRLC
" command are
used for the AM
RLC
retransmission
parameters
specific to
SRBs. In
addition, the
"TimerPoll" and
"NoDiscardMax
DAT" in the
"ADD
UTYPRABRLC
" command are
used for the AM
RLC
retransmission
parameters
specific to PS
services. 29.
CFG_DCH_SR
B_AM_RLC_R
ETRANS_PAR
A_SWITCH:
Switch
controlling the
configuration
mode of AM
RLC SDU
retransmission
parameters for
UEs in the
CELL_DCH
state. When this
switch is turned
on and UEs in
the CELL_DCH
state, on the
RNC, the
transmitting side
of an AM RLC
entity uses the
values of the

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

87

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
"TimerPoll" and
"NoDiscardMax
DAT"
parameters in
the "ADD
UTYPSRBDCH
RNCRLC" or
"MOD
UTYPSRBDCH
RNCRLC"
command for
SDU
retransmission.
When this
switch is turned
off or UEs not in
the CELL_DCH
state, on the
RNC, the
transmitting side
uses the values
of these
parameters in
the "ADD
UTYPSRBRLC
" or "MOD
UTYPSRBRLC
" command for
SDU
retransmission.
GUI Value
Range:CFG_DL
_BLIND_DETE
CTION_SWIT
CH,
CFG_HSDPA_
64QAM_SWIT
CH,
CFG_HSDPA_
MIMO_SWITC
H,
CFG_HSPA_D
TX_DRX_SWI
TCH,
CFG_HSPA_H
SSCCH_LESS_
OP_SWITCH,

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

88

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
CFG_IMS_SUP
PORT_SWITC
H,
CFG_LOSSLE
SS_DLRLC_P
DUSIZECHG_
SWITCH,
CFG_LOSSLE
SS_RELOC_CF
G_SWITCH,
CFG_MULTI_
RAB_SWITCH
,
CFG_PDCP_IP
V6_HEAD_CO
MPRESS_SWI
TCH,
CFG_PDCP_R
FC2507_HC_S
WITCH,
CFG_PDCP_R
FC3095_HC_S
WITCH,
CFG_HSDPA_
MIMO_WITH_
64QAM_SWIT
CH,
CFG_HSDPA_
DC_SWITCH,
CFG_HSUPA_
16QAM_SWIT
CH,
CFG_RAB_RE
L_RMV_HSPA
PLUS_SWITC
H,
CFG_PTT_SWI
TCH,
CFG_EDPCCH
_BOOSTING_S
WITCH,
CFG_HSDPA_
DCMIMO_SWI
TCH,
CFG_FREE_U
SER_SWITCH,
CFG_DC_MIM
O_DYNAMIC_

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

89

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
SELECT_SWIT
CH,
CFG_HSUPA_
DC_SWITCH,
CFG_HSDPA_
4C_MIMO_SW
ITCH,
CFG_HSDPA_
4C_SWITCH,
CFG_HSDPA_
DBMIMO_SWI
TCH,
CFG_HSDPA_
DB_SWITCH,
CFG_RCS_E_S
WITCH,
CFG_FACH_A
M_RLC_RETR
ANSMIT_PAR
A_SWITCH,
CFG_DCH_SR
B_AM_RLC_R
ETRANS_PAR
A_SWITCH
Unit:None
Actual Value
Range:CFG_D
C_MIMO_DY
NAMIC_SELE
CT_SWITCH,
CFG_DL_BLIN
D_DETECTIO
N_SWITCH,
CFG_EDPCCH
_BOOSTING_S
WITCH,
CFG_FREE_U
SER_SWITCH,
CFG_HSDPA_
64QAM_SWIT
CH,
CFG_HSDPA_
DCMIMO_SWI
TCH,
CFG_HSDPA_
DC_SWITCH,
CFG_HSDPA_

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

90

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
MIMO_SWITC
H,
CFG_HSDPA_
MIMO_WITH_
64QAM_SWIT
CH,
CFG_HSDPA_
4C_MIMO_SW
ITCH,
CFG_HSDPA_
4C_SWITCH,
CFG_HSDPA_
DBMIMO_SWI
TCH,
CFG_HSDPA_
DB_SWITCH,
CFG_HSPA_D
TX_DRX_SWI
TCH,
CFG_HSPA_H
SSCCH_LESS_
OP_SWITCH,
CFG_HSUPA_
16QAM_SWIT
CH,
CFG_HSUPA_
DC_SWITCH,
CFG_IMS_SUP
PORT_SWITC
H,
CFG_LOSSLE
SS_DLRLC_P
DUSIZECHG_
SWITCH,
CFG_LOSSLE
SS_RELOC_CF
G_SWITCH,
CFG_MULTI_
RAB_SWITCH
,
CFG_PDCP_IP
V6_HEAD_CO
MPRESS_SWI
TCH,
CFG_PDCP_R
FC2507_HC_S
WITCH,
CFG_PDCP_R

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

91

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
FC3095_HC_S
WITCH,
CFG_PTT_SWI
TCH,
CFG_RAB_RE
L_RMV_HSPA
PLUS_SWITC
H,
CFG_RCS_E_S
WITCH,
CFG_FACH_A
M_RLC_RETR
ANSMIT_PAR
A_SWITCH,
CFG_DCH_SR
B_AM_RLC_R
ETRANS_PAR
A_SWITCH
Default
Value:CFG_DC
_MIMO_DYN
AMIC_SELEC
T_SWITCH:
0,CFG_DL_BL
IND_DETECTI
ON_SWITCH:
1,CFG_EDPCC
H_BOOSTING
_SWITCH:
0,CFG_FREE_
USER_SWITC
H:
0,CFG_HSDPA
_64QAM_SWI
TCH:
1,CFG_HSDPA
_DCMIMO_S
WITCH:
0,CFG_HSDPA
_DC_SWITCH:
0,CFG_HSDPA
_MIMO_SWIT
CH:
1,CFG_HSDPA
_MIMO_WITH
_64QAM_SWI
TCH:

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

92

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
0,CFG_HSDPA
_4C_MIMO_S
WITCH:
0,CFG_HSDPA
_4C_SWITCH:
0,CFG_HSDPA
_DBMIMO_S
WITCH:
0,CFG_HSDPA
_DB_SWITCH:
0,CFG_HSPA_
DTX_DRX_S
WITCH:
0,CFG_HSPA_
HSSCCH_LES
S_OP_SWITC
H:
0,CFG_HSUPA
_16QAM_SWI
TCH:
0,CFG_HSUPA
_DC_SWITCH:
0,CFG_IMS_S
UPPORT_SWI
TCH:
1,CFG_LOSSL
ESS_DLRLC_P
DUSIZECHG_
SWITCH:
0,CFG_LOSSL
ESS_RELOC_
CFG_SWITCH:
0,CFG_MULTI
_RAB_SWITC
H:
1,CFG_PDCP_I
PV6_HEAD_C
OMPRESS_SW
ITCH:
0,CFG_PDCP_
RFC2507_HC_
SWITCH:
0,CFG_PDCP_
RFC3095_HC_
SWITCH:
0,CFG_PTT_S
WITCH:
0,CFG_RAB_R

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

93

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
EL_RMV_HSP
APLUS_SWIT
CH:
0,CFG_RCS_E
_SWITCH:
0,CFG_FACH_
AM_RLC_RET
RANSMIT_PA
RA_SWITCH:
0,CFG_DCH_S
RB_AM_RLC_
RETRANS_PA
RA_SWITCH:0

DtxCycle1

BSC6900

SET
UDTXDRXPA
RA

WRFD-010686

CPC - DTX /
DRX

Meaning:Size of
patterns, that is,
the number of
subframes that
can be
transmitted on
the UL DPCCH.
For details about
this parameter,
see 3GPP TS
25.214.
GUI Value
Range:D1, D4,
D5, D8, D10,
D16, D20
Unit:None
Actual Value
Range:1, 4, 5, 8,
10, 16, 20
Default
Value:D5

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

94

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

DtxCycle1

BSC6910

SET
UDTXDRXPA
RA

WRFD-010686

CPC - DTX /
DRX

Meaning:Size of
patterns, that is,
the number of
subframes that
can be
transmitted on
the UL DPCCH.
For details about
this parameter,
see 3GPP TS
25.214.
GUI Value
Range:D1, D4,
D5, D8, D10,
D16, D20
Unit:None
Actual Value
Range:1, 4, 5, 8,
10, 16, 20
Default
Value:D5

MacDtxCycle

BSC6900

SET
UDTXDRXPA
RA

WRFD-010686

CPC - DTX /
DRX

Meaning:Patter
n of time
instances where
the start the
uplink E-DCH
transmission
after inactivity is
allowed. For
details about this
parameter, see
3GPP TS
25.321.
GUI Value
Range:D1, D4,
D5, D8, D10,
D16, D20
Unit:None
Actual Value
Range:1, 4, 5, 8,
10, 16, 20
Default
Value:D5

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

95

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

MacDtxCycle

BSC6910

SET
UDTXDRXPA
RA

WRFD-010686

CPC - DTX /
DRX

Meaning:Patter
n of time
instances where
the start the
uplink E-DCH
transmission
after inactivity is
allowed. For
details about this
parameter, see
3GPP TS
25.321.
GUI Value
Range:D1, D4,
D5, D8, D10,
D16, D20
Unit:None
Actual Value
Range:1, 4, 5, 8,
10, 16, 20
Default
Value:D5

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

96

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

InactThsForCyc
le2

BSC6900

SET
UDTXDRXPA
RA

WRFD-010686

CPC - DTX /
DRX

Meaning:Numb
er of
consecutive
EDCH TTIs
carrying no data,
which triggers
the interval at
which two
consecutive
patterns are
transmitted on
the UL DPCCH
to be changed
from
"DtxCycle1" to
"DtxCycle2".
The value of
"DtxCycle2" is
an integer
multiple of the
value of
"DtxCycle1".
For details about
this parameter,
see 3GPP TS
25.214.
GUI Value
Range:D1, D4,
D8, D16, D32,
D64, D128,
D256
Unit:None
Actual Value
Range:1, 4, 8,
16, 32, 64, 128,
256
Default
Value:None

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

97

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

InactThsForCyc
le2

BSC6910

SET
UDTXDRXPA
RA

WRFD-010686

CPC - DTX /
DRX

Meaning:Numb
er of
consecutive
EDCH TTIs
carrying no data,
which triggers
the interval at
which two
consecutive
patterns are
transmitted on
the UL DPCCH
to be changed
from
"DtxCycle1" to
"DtxCycle2".
The value of
"DtxCycle2" is
an integer
multiple of the
value of
"DtxCycle1".
For details about
this parameter,
see 3GPP TS
25.214.
GUI Value
Range:D1, D4,
D8, D16, D32,
D64, D128,
D256
Unit:None
Actual Value
Range:1, 4, 8,
16, 32, 64, 128,
256
Default
Value:None

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

98

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

DtxLongPream
ble

BSC6900

SET
UDTXDRXPA
RA

WRFD-010686

CPC - DTX /
DRX

Meaning:Numb
er of preamble
timeslots sent
before data is
transmitted on
the DPCCH
when patterns
with the size of
"DtxCycle2" are
transmitted on
the DPCCH. For
details about this
parameter, see
3GPP TS
25.214.
GUI Value
Range:D2, D4,
D15
Unit:timeslot
Actual Value
Range:2, 4, 15
Default
Value:D2

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

99

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

DtxLongPream
ble

BSC6910

SET
UDTXDRXPA
RA

WRFD-010686

CPC - DTX /
DRX

Meaning:Numb
er of preamble
timeslots sent
before data is
transmitted on
the DPCCH
when patterns
with the size of
"DtxCycle2" are
transmitted on
the DPCCH. For
details about this
parameter, see
3GPP TS
25.214.
GUI Value
Range:D2, D4,
D15
Unit:timeslot
Actual Value
Range:2, 4, 15
Default
Value:D2

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

100

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

MacInactiveThreshold

BSC6900

SET
UDTXDRXPA
RA

WRFD-010686

CPC - DTX /
DRX

Meaning:Period
during which no
data is
transmitted on
the E-DCH. For
details about this
parameter, see
3GPP TS
25.321.
GUI Value
Range:D1, D2,
D4, D8, D16,
D32, D64,
D128, D256,
D512,
INFINITY
Unit:None
Actual Value
Range:1, 2, 4, 8,
16, 32, 64, 128,
256, 512,
INFINITY
Default
Value:None

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

101

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

MacInactiveThreshold

BSC6910

SET
UDTXDRXPA
RA

WRFD-010686

CPC - DTX /
DRX

Meaning:Period
during which no
data is
transmitted on
the E-DCH. For
details about this
parameter, see
3GPP TS
25.321.
GUI Value
Range:D1, D2,
D4, D8, D16,
D32, D64,
D128, D256,
D512,
INFINITY
Unit:None
Actual Value
Range:1, 2, 4, 8,
16, 32, 64, 128,
256, 512,
INFINITY
Default
Value:None

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

102

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

DpcchBurst1

BSC6900

SET
UDTXDRXPA
RA

WRFD-010686
WRFD-010703

Feature Name

Description
Meaning:Numb
er of
consecutive
DPCCH
subframes that
can be
transmitted over
the uplink
DPCCH in one
pattern
transmission
period specified
by "DtxCycle1".
For details about
this parameter,
see 3GPP TS
25.214.
GUI Value
Range:D1, D2,
D5
Unit:None
Actual Value
Range:1, 2, 5
Default
Value:D1

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

103

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

DpcchBurst1

BSC6910

SET
UDTXDRXPA
RA

WRFD-010686
WRFD-010703

Feature Name

Description
Meaning:Numb
er of
consecutive
DPCCH
subframes that
can be
transmitted over
the uplink
DPCCH in one
pattern
transmission
period specified
by "DtxCycle1".
For details about
this parameter,
see 3GPP TS
25.214.
GUI Value
Range:D1, D2,
D5
Unit:None
Actual Value
Range:1, 2, 5
Default
Value:D1

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

104

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

DpcchBurst2

BSC6900

SET
UDTXDRXPA
RA

WRFD-010686
WRFD-010703

Feature Name

Description
Meaning:Numb
er of
consecutive
DPCCH
subframes that
can be
transmitted over
the uplink
DPCCH in one
pattern
transmission
period specified
by "DtxCycle2".
For details about
this parameter,
see 3GPP TS
25.214.
GUI Value
Range:D1, D2,
D5
Unit:None
Actual Value
Range:1, 2, 5
Default
Value:D1

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

105

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

DpcchBurst2

BSC6910

SET
UDTXDRXPA
RA

WRFD-010686
WRFD-010703

Feature Name

Description
Meaning:Numb
er of
consecutive
DPCCH
subframes that
can be
transmitted over
the uplink
DPCCH in one
pattern
transmission
period specified
by "DtxCycle2".
For details about
this parameter,
see 3GPP TS
25.214.
GUI Value
Range:D1, D2,
D5
Unit:None
Actual Value
Range:1, 2, 5
Default
Value:D1

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

106

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

Drxvalid

BSC6900

SET
UDTXDRXPA
RA

WRFD-010686

CPC - DTX /
DRX

Meaning:Wheth
er the
parameters
related to DRX
are valid. The
parameters
related to DRX
are optional and
they can be set
only when the
parameters
related to DTX
are configured.
OFF indicates
that the
parameters
related to DRX
are invalid and
DRX cannot be
configured. ON
indicates that the
parameters
related to DRX
are valid.
GUI Value
Range:OFF, ON
Unit:None
Actual Value
Range:ON, OFF
Default
Value:ON

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

107

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

Drxvalid

BSC6910

SET
UDTXDRXPA
RA

WRFD-010686

CPC - DTX /
DRX

Meaning:Wheth
er the
parameters
related to DRX
are valid. The
parameters
related to DRX
are optional and
they can be set
only when the
parameters
related to DTX
are configured.
OFF indicates
that the
parameters
related to DRX
are invalid and
DRX cannot be
configured. ON
indicates that the
parameters
related to DRX
are valid.
GUI Value
Range:OFF, ON
Unit:None
Actual Value
Range:ON, OFF
Default
Value:ON

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

108

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

DrxCycle

BSC6900

SET
UDTXDRXPA
RA

WRFD-010686

CPC - DTX /
DRX

Meaning:Size of
patterns (that is,
the number of
subframes) that
can be received
on the HSSCCH. For
details about this
parameter, see
3GPP TS
25.214.
GUI Value
Range:D4, D5,
D8, D10, D16,
D20
Unit:None
Actual Value
Range:4, 5, 8,
10, 16, 20
Default
Value:D5

DrxCycle

BSC6910

SET
UDTXDRXPA
RA

WRFD-010686

CPC - DTX /
DRX

Meaning:Size of
patterns (that is,
the number of
subframes) that
can be received
on the HSSCCH. For
details about this
parameter, see
3GPP TS
25.214.
GUI Value
Range:D4, D5,
D8, D10, D16,
D20
Unit:None
Actual Value
Range:4, 5, 8,
10, 16, 20
Default
Value:D5

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

109

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

InactThsForDrx
Cycle

BSC6900

SET
UDTXDRXPA
RA

WRFD-010686

CPC - DTX /
DRX

Meaning:Numb
er of
consecutive
subframes that
the UE needs to
monitor on each
HS-SCCH of the
HS-SCCH set
immediately
after the data
reception on the
HS-SCCH or
HS-PDSCH. For
details about this
parameter, see
3GPP TS
25.214.
GUI Value
Range:D0, D1,
D2, D4, D8,
D16, D32, D64,
D128, D256,
D512
Unit:None
Actual Value
Range:0, 1, 2, 4,
8, 16, 32, 64,
128, 256, 512
Default
Value:D4

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

110

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

InactThsForDrx
Cycle

BSC6910

SET
UDTXDRXPA
RA

WRFD-010686

CPC - DTX /
DRX

Meaning:Numb
er of
consecutive
subframes that
the UE needs to
monitor on each
HS-SCCH of the
HS-SCCH set
immediately
after the data
reception on the
HS-SCCH or
HS-PDSCH. For
details about this
parameter, see
3GPP TS
25.214.
GUI Value
Range:D0, D1,
D2, D4, D8,
D16, D32, D64,
D128, D256,
D512
Unit:None
Actual Value
Range:0, 1, 2, 4,
8, 16, 32, 64,
128, 256, 512
Default
Value:D4

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

111

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

CQIFbCkinInDTXDRXm
ode

BSC6900

SET
UDTXDRXPA
RA

WRFD-010686

CPC - DTX /
DRX

Meaning:CQI
feedback cycle
in DTX-DRX
mode. If the
NodeB uses
WBBPb boards,
the value of this
parameter can
be set to only
D2. For details
about this
parameter, see
3GPP TS
25.214.
GUI Value
Range:D0, D2,
D4, D8, D10,
D20, D40, D80,
D160, D16,
D32, D64
Unit:ms
Actual Value
Range:0, 2, 4, 8,
10, 20, 40, 80,
160, 16, 32, 64
Default
Value:D2

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

112

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

CQIFbCkinInDTXDRXm
ode

BSC6910

SET
UDTXDRXPA
RA

WRFD-010686

CPC - DTX /
DRX

Meaning:CQI
feedback cycle
in DTX-DRX
mode. If the
NodeB uses
WBBPb boards,
the value of this
parameter can
be set to only
D2. For details
about this
parameter, see
3GPP TS
25.214.
GUI Value
Range:D0, D2,
D4, D8, D10,
D20, D40, D80,
D160, D16,
D32, D64
Unit:ms
Actual Value
Range:0, 2, 4, 8,
10, 20, 40, 80,
160, 16, 32, 64
Default
Value:D2

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

113

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

MaxTargetUlLo
adFactor

BSC6900

ADD
UCELLHSUPA

WRFD-140222

MOD
UCELLHSUPA

WRFD-010612
03

Adaptive
Adjustment of
HSUPA Small
Target
Retransmissions

Meaning:The
parameter sets
the target value
of the uplink
load. HSUPA
power control
on the NodeB
side keeps
uplink load
close to the
target value. For
details about this
parameter, see
3GPP TS
25.433.

WRFD-140211

Dynamic Target
RoT Adjustment
HSUPA Power
Control

GUI Value
Range:0~100
Unit:%
Actual Value
Range:0~100
Default Value:
75
MaxTargetUlLo
adFactor

BSC6910

ADD
UCELLHSUPA

WRFD-140222

MOD
UCELLHSUPA

WRFD-010612
03

WRFD-140211

Adaptive
Adjustment of
HSUPA Small
Target
Retransmissions
Dynamic Target
RoT Adjustment
HSUPA Power
Control

Meaning:The
parameter sets
the target value
of the uplink
load. HSUPA
power control
on the NodeB
side keeps
uplink load
close to the
target value. For
details about this
parameter, see
3GPP TS
25.433.
GUI Value
Range:0~100
Unit:%
Actual Value
Range:0~100
Default Value:
75

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

114

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

PROCESSSWI
TCH2

BSC6900

SET
URRCTRLSWI
TCH

WRFD-150215

SRVCC from
LTE to UMTS
with PS
Handover

Meaning:1)
LOAD_IRAT_
HO_RNC_FILL
_TL (Cell Load
Information TL
Input Switch)
During interRAT handovers
from 3G cells to
2G cells, the
RNC can
records
information
about load on 3G
cells in the
RELOCATION
REQUIRED
container in the
Tag Length
Value (TLV)
format. 1: This
switch is turned
on. The RNC
records the Tag
Length in the
container. 0:
This switch is
turned off. The
RNC does not
record the Tag
Length. 2)
SEND_IDT_JU
DGE_IU_RESE
T (Switch for
Transferring
INITIAL UE
Messages in the
IU Reset State)
1: This switch is
turned on. The
RNC discards
the INITIAL UE
message from a
CN node if the Iu
interface is in the
reset state. 0:
This switch is
turned off. The

WRFD-010101
WRFD-030011
WRFD-020500
WRFD-140224
WRFD-020400
WRFD-140205

3GPP R9
Specifications
Enhanced Fast
Dormancy
Fast CS
Fallback Based
on RIM
DRD
Introduction
Package
Voice Service
Experience
Improvement
for Weak
Reception Ues

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

115

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
RNC handles
the INITIAL UE
message from a
CN node if the Iu
interface is in the
reset state. 3)
RNC_RBRECF
G_DRD_FAIL_
ROLLBACK_S
WITCH (RB
Reconfiguration
DRD Rollback
Switch) 1: This
switch is turned
on. The RNC
supports
rollback caused
by failed
directed retry
decisions
(DRDs) of RB
reconfiguration.
0: This switch is
turned off. The
RNC does not
support rollback
caused by failed
DRDs of RB
reconfiguration.
4)
RNC_CS_QUE
RY_UE_IMEI_
SWITCH (CS
IMEI Request
Switch) 1: This
switch is turned
on. The RNC
rather than the
CN sends an
IDENTITY
REQUEST
message to
obtain the
international
mobile
equipment
identity (IMEI)
of a UE. Note:

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

116

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
When the CN
checks the serial
number of direct
transfer
messages and
the
SEND_MSG_N
ULL_SWITCH
switch is turned
off, turning on
this switch leads
to inconsistency
in the serial
number of direct
transfer
messages
between the CN
and the UE. This
causes CS
service setup
failures.
Therefore, you
are not advised
to turn on this
switch. Before
turning on this
switch, test the
interworking
between the
RNC and the
CN. If the CN
checks the serial
number of direct
transfer
messages, turn
on
SEND_MSG_N
ULL_SWITCH
under
"PROCESSSWI
TCH4" in the
"SET
URRCTRLSWI
TCH"
command. 0:
This switch is
turned off. The
RNC does not

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

117

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
send an
IDENTITY
REQUEST
message to
obtain the IMEI
of a UE. 5)
RNC_PS_QUE
RY_UE_IMEI_
SWITCH (PS
IMEI Request
Switch) 1: This
switch is turned
on. The RNC,
rather than the
CN, sends an
IDENTITY
REQUEST
message to
obtain the IMEI
of a UE. 0: This
switch is turned
off. The RNC
does not send an
IDENTITY
REQUEST
message to
obtain the IMEI
of a UE. 6)
FACH_DTCH_
CONGEST_P2
D (P2D Switch
for Congested
FACH or
DTCH) 1: This
switch is turned
on. UEs using
PS services
trigger the
CELL_PCH-toCELL_DCH
procedure (P2D
procedure for
short) on a
congested
FACH or
DTCH. 0: This
switch is turned
off. UEs using

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

118

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
PS services do
not trigger the
P2D procedure
on a congested
FACH or
DTCH. 7)
RNC_RBSETU
P_DRD_FAIL_
ROLLBACK_S
WITCH (RB
Establishment
DRD Rollback
Switch) 1: This
switch is turned
on. The RNC
supports
rollback caused
by failed DRDs
of RB
establishment.
0: This switch is
turned off. The
RNC does not
support rollback
caused by failed
DRDs of RB
establishment.
However, the
RNC cannot
control the
scenario where
the RB fast setup
function is used
for RB
establishment
accompanied by
DRDs. 8)
PS_NOTIFYC
N_NOTDOWN
SIZE_SWITCH
(Switch for Not
Triggering Rate
Reduction
Negotiation
Between the CN
and the RNC
After a PS
Service Access

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

119

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
Failure) 1: This
switch is turned
on. The access
rate is not
negotiated
between the
RNC and the CN
if a PS service
fails to be
admitted. 0: This
switch is turned
off. The access
rate is
negotiated
between the
RNC and the CN
if a PS service
fails to be
admitted. 9)
ASU_RSP_TIM
EOUT_HAND
LE_SWITCH
(Switch for
Performing the
Optimized SoftHandover
Timeout
Procedure) 1:
This switch is
turned on. The
RNC considers
that it has
received an
ACTIVE SET
UPDATE
COMPLETE
message during
soft handover
procedure after
the message has
expired. 0: This
switch is turned
off. RABs are
directly released
during soft
handover
procedure after
the ACTIVE

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

120

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
SET UPDATE
COMPLETE
message has
expired. 10)
RB_RECFG_U
SER_INACT_S
WITCH (Switch
for Performing
the Optimized
RRC
Connection
Release
Procedure with
No Data
Transmitted on
the UE upon UE
State Transition
Timeout) 1: This
switch is turned
on. The RNC
initiated the
release process
with the cause of
user inactive
when the UE
have no data to
transmit. 0: This
switch is turned
off. The RNC
initiated the
release process
with other
causes when the
UE have no data
to transmit. 11)
RRC_SCRI_N
ORM_REL_S
WITCH (Switch
for Performing
the Optimized
RRC
Connection
Release
Procedure on
Receipt of a
SIGNALLING
CONNECTION
RELEASE

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

121

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
INDICATION
Message) 1:
This switch is
turned on. The
RNC initiated
the normal
release process
after receive
SIGNALLING
CONNECTION
RELEASE
INDICATION
message from
UE. 0: This
switch is turned
off. The RNC
does not handle
SIGNALLING
CONNECTION
RELEASE
INDICATION
message during
the process. 12)
CELLUPT_RL
FAILURE_SRB
REESTAB_SW
ITCH (Switch
for SRB
Reestablishment
During a Cell
Update with the
Cause Value of
RL Failure) 1:
This switch is
turned on. SRBs
are reestablished
during cell
update
procedure with
the "RL Failure"
cause value. 0:
This switch is
turned off. SRBs
are not
reestablished
during cell
update
procedure with

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

122

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
the "RL Failure"
cause value. 13)
CU_OVERLAP
_DSCR_SWIT
CH (Switch for
Performing the
Optimized
Procedure for
Concurrent RB
and Cell Update,
Hard handover,
or DRD) 1: This
switch is turned
on. The DSCR
procedure is
performed if
RNC can not
handles
different
processes
performed
simultaneously.
0: This switch is
turned off. The
DSCR
procedure is not
performed in
this scenes. 14)
TRB_RST_DS
CR_SWITCH
(Switch for
Performing the
Optimized TRB
Reset Procedure
for PS BE
Services) 1: This
switch is turned
on. The DSCR
procedure is
performed if a
Layer 2 data
transmission
error occurs. 0:
This switch is
turned off. The
DSCR
procedure is not
performed if a

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

123

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
Layer 2 data
transmission
error occurs. 15)
RNC_FD_SCRI
_FORCE_REL_
SWITCH
(Signaling
Connection
Release Switch
for UEs
Supporting Fast
Dormancy) 1:
This switch is
turned on. If the
RNC receives a
SIGNALING
CONNECTION
RELEASE
INDICATION
from UE with
the cause of "UE
Requested PS
Data session
end", the RNC
triggers the state
transition for the
UE. Otherwise,
the RNC
releases the
signaling
connection. 0:
This switch is
turned off. If the
RNC receives a
SIGNALING
CONNECTION
RELEASE
INDICATION
from UE, the
RNC triggers
the state
transition for the
UE. 16)
USRPLN_PRO
RATION_SHA
RED_ALO
(Algorithm
Switch for Inter-

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

124

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
Subrack Load
Sharing on the
User Plane) 1:
This switch is
turned on. Load
sharing can be
performed based
on the ratio of
available user
plane resources
to total user
plane resources
in a subrack. 0:
This switch is
turned off. Load
sharing cannot
be performed
based on the
ratio of available
user plane
resources to
total user plane
resources in a
subrack. 17)
FP_IUUP_TRA
CE_SWITCH
(Switch for
Tracing UEs
Failing in FP
Synchronization
) 1: This switch
is turned on.
UEs using FP
can be traced in
terms of data
streams. 0: This
switch is turned
off. UEs using
FP cannot be
traced in terms
of data streams.
18)
RNC_PCHR_O
UTPUT_CTRL
_SWITCH
(Switch for
Reducing PCHR
Log Information

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

125

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
for Normal
Procedure) The
switch
RNC_PCHR_O
UTPUT_CTRL
_SWITCH
controls whether
the RNC
reduces
information
recorded in a
PCHR log for a
normal
procedure. 1:
This switch is
turned on. The
RNC reduces
information in a
performance
call history
record (PCHR)
log recorded
during a normal
procedure and
reports only the
following
information
blocks: RRC_RELEAS
ECS_RAB_SET
UP PS_RAB_SET
UP CS_RAB_REL
-PS_RAB_REL
-SHO SYS_HO_OUT
INTRA_FREQ_
NET_OPT STAT CS_RAB_QUA
LITY_STAT PS_RAB_QUA
LITY_STAT A
procedure is
abnormal only

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

126

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
when either of
the following
conditions is
met: -The RRC
connection
setup fails. -The
RAB setup fails.
-The RAB is
abnormally
released. -The
value of the
information
element (IE)
NAS-PDU
contained in a
DIRECT
TRANSFER
message is
ATTACH
REJECT, RAU
REJECT, or
LAU REJECT.
0: This switch is
turned off. The
RNC does not
reduce
information
recorded in a
PCHR log. 19)
DTMF_SWITC
H (DTMF
Switch) 1: This
switch is turned
on. The RNC
starts tracing
after receiving a
special
RANAP_DIRE
CT_TRANSFE
R message from
a UE. 0: This
switch is turned
off. The RNC
does not start
tracing after
receiving a
special
RANAP_DIRE

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

127

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
CT_TRANSFE
R message from
a UE. 20)
FAST_CS_FB_
BASEDON_RI
M_SWITCH
(Switch for fast
CSFB based on
RIM) 1: This
switch is turned
on. The RNC
supports fast
CSFB(CS
fallback) based
on RIM. 0: This
switch is turned
off. The RNC
does not support
fast CSFB(CS
fallback) based
on RIM. 21)
L2U_SRVCC_
WITH_PS_HO
_SWITCH
Whether to
support LTE-toUMTS CS and
PS handovers
simultaneously.
1: This switch is
turned on. LTEto-UMTS CS
and PS
handovers can
happen
simultaneously.
0: This switch is
turned off. LTEto-UMTS CS
and PS
handovers
cannot happen
simultaneously.
22)
ULTRA_FLAS
H_CSFB_SWIT
CH(Ultra-Flash
CSFB Function

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

128

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
Switch)
Whether the
Ultra-Flash
CSFB function
takes effect. 1:
This switch is
turned on. The
RNC supports
the Ultra-Flash
CSFB function,
and the delay of
CSFB is
reduced,
improving user
experience. 0:
This switch is
turned off. The
RNC does not
support the
Ultra-Flash
CSFB function,
and the delay of
CSFB is long,
affecting user
experience. 23)
RNC_PS_QUE
RY_UE_IMEIS
V_SWITCH
(Support RNC
PS Querying UE
IMEISV)
Whether the
RNC sends an
Identity Request
message to the
UE, requesting
the UE's
international
mobile station
equipment
identity and
software version
(IMEISV). 1:
This switch is set
to on. The RNC
sends an Identity
Request
message to the

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

129

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
UE, requesting
the UE's
IMEISV. 0: This
switch is set to
off. The RNC
does not send an
Identity Request
message to the
UE. If this
switch is
enabled together
with the
RNC_PS_QUE
RY_UE_IMEI_
SWITCH, the
RNC queries the
UE's IMEISV,
not IMEI.
Disuse
Statement:This
switch
USRPLN_PRO
RATION_SHA
RED_ALO will
be deleted from
later versions.
Although the
configuration
interface in this
version supports
delivery of the
setting of this
switch, the
system does not
use this switch.
Therefore, this
switch is not
recommended.
GUI Value
Range:LOAD_I
RAT_HO_RNC
_FILL_TL,
SEND_IDT_JU
DGE_IU_RESE
T,
RNC_RBRECF
G_DRD_FAIL_

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

130

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
ROLLBACK_S
WITCH,
RNC_CS_QUE
RY_UE_IMEI_
SWITCH,
RNC_PS_QUE
RY_UE_IMEI_
SWITCH,
FACH_DTCH_
CONGEST_P2
D,
RNC_RBSETU
P_DRD_FAIL_
ROLLBACK_S
WITCH,
PS_NOTIFYC
N_NOTDOWN
SIZE_SWITCH
,
ASU_RSP_TIM
EOUT_HAND
LE_SWITCH,
RB_RECFG_U
SER_INACT_S
WITCH,
RRC_SCRI_N
ORM_REL_S
WITCH,
CELLUPT_RL
FAILURE_SRB
REESTAB_SW
ITCH,
CU_OVERLAP
_DSCR_SWIT
CH,
TRB_RST_DS
CR_SWITCH,
RNC_FD_SCRI
_FORCE_REL_
SWITCH,
USRPLN_PRO
RATION_SHA
RED_ALO,
FP_IUUP_TRA
CE_SWITCH,
RNC_PCHR_O
UTPUT_CTRL
_SWITCH,

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

131

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
DTMF_SWITC
H,
FAST_CS_FB_
BASEDON_RI
M_SWITCH,
L2U_SRVCC_
WITH_PS_HO
_SWITCH,
ULTRA_FLAS
H_CSFB_SWIT
CH,
RNC_PS_QUE
RY_UE_IMEIS
V_SWITCH
Unit:None
Actual Value
Range:LOAD_I
RAT_HO_RNC
_FILL_TL,
SEND_IDT_JU
DGE_IU_RESE
T,
RNC_RBRECF
G_DRD_FAIL_
ROLLBACK_S
WITCH,
RNC_CS_QUE
RY_UE_IMEI_
SWITCH,
RNC_PS_QUE
RY_UE_IMEI_
SWITCH,
FACH_DTCH_
CONGEST_P2
D,
RNC_RBSETU
P_DRD_FAIL_
ROLLBACK_S
WITCH,
PS_NOTIFYC
N_NOTDOWN
SIZE_SWITCH
,
ASU_RSP_TIM
EOUT_HAND
LE_SWITCH,
RB_RECFG_U

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

132

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
SER_INACT_S
WITCH,
RRC_SCRI_N
ORM_REL_S
WITCH,
CELLUPT_RL
FAILURE_SRB
REESTAB_SW
ITCH,
CU_OVERLAP
_DSCR_SWIT
CH,
TRB_RST_DS
CR_SWITCH,
RNC_FD_SCRI
_FORCE_REL_
SWITCH,
USRPLN_PRO
RATION_SHA
RED_ALO,
FP_IUUP_TRA
CE_SWITCH,
RNC_PCHR_O
UTPUT_CTRL
_SWITCH,
DTMF_SWITC
H,
FAST_CS_FB_
BASEDON_RI
M_SWITCH,
L2U_SRVCC_
WITH_PS_HO
_SWITCH,
ULTRA_FLAS
H_CSFB_SWIT
CH,
RNC_PS_QUE
RY_UE_IMEIS
V_SWITCH
Default
Value:LOAD_I
RAT_HO_RNC
_FILL_TL:
0,SEND_IDT_J
UDGE_IU_RE
SET:
0,RNC_RBREC

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

133

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
FG_DRD_FAIL
_ROLLBACK_
SWITCH:
1,RNC_CS_QU
ERY_UE_IMEI
_SWITCH:
0,RNC_PS_QU
ERY_UE_IMEI
_SWITCH:
0,FACH_DTC
H_CONGEST_
P2D:
0,RNC_RBSET
UP_DRD_FAIL
_ROLLBACK_
SWITCH:
0,PS_NOTIFY
CN_NOTDOW
NSIZE_SWITC
H:
0,ASU_RSP_TI
MEOUT_HAN
DLE_SWITCH:
0,RB_RECFG_
USER_INACT_
SWITCH:
0,RRC_SCRI_
NORM_REL_S
WITCH:
0,CELLUPT_R
LFAILURE_SR
BREESTAB_S
WITCH:
0,CU_OVERL
AP_DSCR_SW
ITCH:
0,TRB_RST_D
SCR_SWITCH:
0,RNC_FD_SC
RI_FORCE_RE
L_SWITCH:
0,USRPLN_PR
ORATION_SH
ARED_ALO:
0,FP_IUUP_TR
ACE_SWITCH:
1,RNC_PCHR_
OUTPUT_CTR

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

134

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
L_SWITCH:
1,DTMF_SWIT
CH:
1,FAST_CS_F
B_BASEDON_
RIM_SWITCH:
0,L2U_SRVCC
_WITH_PS_H
O_SWITCH:
0,ULTRA_FLA
SH_CSFB_SWI
TCH:
0,RNC_PS_QU
ERY_UE_IMEI
SV_SWITCH:0

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

135

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

PROCESSSWI
TCH2

BSC6910

SET
URRCTRLSWI
TCH

WRFD-150215

SRVCC from
LTE to UMTS
with PS
Handover

Meaning:1)
LOAD_IRAT_
HO_RNC_FILL
_TL (Cell Load
Information TL
Input Switch)
During interRAT handovers
from 3G cells to
2G cells, the
RNC can
records
information
about load on 3G
cells in the
RELOCATION
REQUIRED
container in the
Tag Length
Value (TLV)
format. 1: This
switch is turned
on. The RNC
records the Tag
Length in the
container. 0:
This switch is
turned off. The
RNC does not
record the Tag
Length. 2)
SEND_IDT_JU
DGE_IU_RESE
T (Switch for
Transferring
INITIAL UE
Messages in the
IU Reset State)
1: This switch is
turned on. The
RNC discards
the INITIAL UE
message from a
CN node if the Iu
interface is in the
reset state. 0:
This switch is
turned off. The

WRFD-010101
WRFD-030011
WRFD-020500
WRFD-140224
WRFD-020400
WRFD-140205

3GPP R9
Specifications
Enhanced Fast
Dormancy
Fast CS
Fallback Based
on RIM
DRD
Introduction
Package
Voice Service
Experience
Improvement
for Weak
Reception Ues

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

136

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
RNC handles
the INITIAL UE
message from a
CN node if the Iu
interface is in the
reset state. 3)
RNC_RBRECF
G_DRD_FAIL_
ROLLBACK_S
WITCH (RB
Reconfiguration
DRD Rollback
Switch) 1: This
switch is turned
on. The RNC
supports
rollback caused
by failed
directed retry
decisions
(DRDs) of RB
reconfiguration.
0: This switch is
turned off. The
RNC does not
support rollback
caused by failed
DRDs of RB
reconfiguration.
4)
RNC_CS_QUE
RY_UE_IMEI_
SWITCH (CS
IMEI Request
Switch) 1: This
switch is turned
on. The RNC
rather than the
CN sends an
IDENTITY
REQUEST
message to
obtain the
international
mobile
equipment
identity (IMEI)
of a UE. Note:

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

137

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
When the CN
checks the serial
number of direct
transfer
messages and
the
SEND_MSG_N
ULL_SWITCH
switch is turned
off, turning on
this switch leads
to inconsistency
in the serial
number of direct
transfer
messages
between the CN
and the UE. This
causes CS
service setup
failures.
Therefore, you
are not advised
to turn on this
switch. Before
turning on this
switch, test the
interworking
between the
RNC and the
CN. If the CN
checks the serial
number of direct
transfer
messages, turn
on
SEND_MSG_N
ULL_SWITCH
under
"PROCESSSWI
TCH4" in the
"SET
URRCTRLSWI
TCH"
command. 0:
This switch is
turned off. The
RNC does not

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

138

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
send an
IDENTITY
REQUEST
message to
obtain the IMEI
of a UE. 5)
RNC_PS_QUE
RY_UE_IMEI_
SWITCH (PS
IMEI Request
Switch) 1: This
switch is turned
on. The RNC,
rather than the
CN, sends an
IDENTITY
REQUEST
message to
obtain the IMEI
of a UE. 0: This
switch is turned
off. The RNC
does not send an
IDENTITY
REQUEST
message to
obtain the IMEI
of a UE. 6)
FACH_DTCH_
CONGEST_P2
D (P2D Switch
for Congested
FACH or
DTCH) 1: This
switch is turned
on. UEs using
PS services
trigger the
CELL_PCH-toCELL_DCH
procedure (P2D
procedure for
short) on a
congested
FACH or
DTCH. 0: This
switch is turned
off. UEs using

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

139

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
PS services do
not trigger the
P2D procedure
on a congested
FACH or
DTCH. 7)
RNC_RBSETU
P_DRD_FAIL_
ROLLBACK_S
WITCH (RB
Establishment
DRD Rollback
Switch) 1: This
switch is turned
on. The RNC
supports
rollback caused
by failed DRDs
of RB
establishment.
0: This switch is
turned off. The
RNC does not
support rollback
caused by failed
DRDs of RB
establishment.
However, the
RNC cannot
control the
scenario where
the RB fast setup
function is used
for RB
establishment
accompanied by
DRDs. 8)
PS_NOTIFYC
N_NOTDOWN
SIZE_SWITCH
(Switch for Not
Triggering Rate
Reduction
Negotiation
Between the CN
and the RNC
After a PS
Service Access

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

140

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
Failure) 1: This
switch is turned
on. The access
rate is not
negotiated
between the
RNC and the CN
if a PS service
fails to be
admitted. 0: This
switch is turned
off. The access
rate is
negotiated
between the
RNC and the CN
if a PS service
fails to be
admitted. 9)
ASU_RSP_TIM
EOUT_HAND
LE_SWITCH
(Switch for
Performing the
Optimized SoftHandover
Timeout
Procedure) 1:
This switch is
turned on. The
RNC considers
that it has
received an
ACTIVE SET
UPDATE
COMPLETE
message during
soft handover
procedure after
the message has
expired. 0: This
switch is turned
off. RABs are
directly released
during soft
handover
procedure after
the ACTIVE

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

141

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
SET UPDATE
COMPLETE
message has
expired. 10)
RB_RECFG_U
SER_INACT_S
WITCH (Switch
for Performing
the Optimized
RRC
Connection
Release
Procedure with
No Data
Transmitted on
the UE upon UE
State Transition
Timeout) 1: This
switch is turned
on. The RNC
initiated the
release process
with the cause of
user inactive
when the UE
have no data to
transmit. 0: This
switch is turned
off. The RNC
initiated the
release process
with other
causes when the
UE have no data
to transmit. 11)
RRC_SCRI_N
ORM_REL_S
WITCH (Switch
for Performing
the Optimized
RRC
Connection
Release
Procedure on
Receipt of a
SIGNALLING
CONNECTION
RELEASE

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

142

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
INDICATION
Message) 1:
This switch is
turned on. The
RNC initiated
the normal
release process
after receive
SIGNALLING
CONNECTION
RELEASE
INDICATION
message from
UE. 0: This
switch is turned
off. The RNC
does not handle
SIGNALLING
CONNECTION
RELEASE
INDICATION
message during
the process. 12)
CELLUPT_RL
FAILURE_SRB
REESTAB_SW
ITCH (Switch
for SRB
Reestablishment
During a Cell
Update with the
Cause Value of
RL Failure) 1:
This switch is
turned on. SRBs
are reestablished
during cell
update
procedure with
the "RL Failure"
cause value. 0:
This switch is
turned off. SRBs
are not
reestablished
during cell
update
procedure with

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

143

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
the "RL Failure"
cause value. 13)
CU_OVERLAP
_DSCR_SWIT
CH (Switch for
Performing the
Optimized
Procedure for
Concurrent RB
and Cell Update,
Hard handover,
or DRD) 1: This
switch is turned
on. The DSCR
procedure is
performed if
RNC can not
handles
different
processes
performed
simultaneously.
0: This switch is
turned off. The
DSCR
procedure is not
performed in
this scenes. 14)
TRB_RST_DS
CR_SWITCH
(Switch for
Performing the
Optimized TRB
Reset Procedure
for PS BE
Services) 1: This
switch is turned
on. The DSCR
procedure is
performed if a
Layer 2 data
transmission
error occurs. 0:
This switch is
turned off. The
DSCR
procedure is not
performed if a

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

144

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
Layer 2 data
transmission
error occurs. 15)
RNC_FD_SCRI
_FORCE_REL_
SWITCH
(Signaling
Connection
Release Switch
for UEs
Supporting Fast
Dormancy) 1:
This switch is
turned on. If the
RNC receives a
SIGNALING
CONNECTION
RELEASE
INDICATION
from UE with
the cause of "UE
Requested PS
Data session
end", the RNC
triggers the state
transition for the
UE. Otherwise,
the RNC
releases the
signaling
connection. 0:
This switch is
turned off. If the
RNC receives a
SIGNALING
CONNECTION
RELEASE
INDICATION
from UE, the
RNC triggers
the state
transition for the
UE. 16)
USRPLN_PRO
RATION_SHA
RED_ALO
(Algorithm
Switch for Inter-

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

145

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
Subrack Load
Sharing on the
User Plane) 1:
This switch is
turned on. Load
sharing can be
performed based
on the ratio of
available user
plane resources
to total user
plane resources
in a subrack. 0:
This switch is
turned off. Load
sharing cannot
be performed
based on the
ratio of available
user plane
resources to
total user plane
resources in a
subrack. 17)
FP_IUUP_TRA
CE_SWITCH
(Switch for
Tracing UEs
Failing in FP
Synchronization
) 1: This switch
is turned on.
UEs using FP
can be traced in
terms of data
streams. 0: This
switch is turned
off. UEs using
FP cannot be
traced in terms
of data streams.
18)
RNC_PCHR_O
UTPUT_CTRL
_SWITCH
(Switch for
Reducing PCHR
Log Information

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

146

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
for Normal
Procedure) The
switch
RNC_PCHR_O
UTPUT_CTRL
_SWITCH
controls whether
the RNC
reduces
information
recorded in a
PCHR log for a
normal
procedure. 1:
This switch is
turned on. The
RNC reduces
information in a
performance
call history
record (PCHR)
log recorded
during a normal
procedure and
reports only the
following
information
blocks: RRC_RELEAS
ECS_RAB_SET
UP PS_RAB_SET
UP CS_RAB_REL
-PS_RAB_REL
-SHO SYS_HO_OUT
INTRA_FREQ_
NET_OPT STAT CS_RAB_QUA
LITY_STAT PS_RAB_QUA
LITY_STAT A
procedure is
abnormal only

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

147

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
when either of
the following
conditions is
met: -The RRC
connection
setup fails. -The
RAB setup fails.
-The RAB is
abnormally
released. -The
value of the
information
element (IE)
NAS-PDU
contained in a
DIRECT
TRANSFER
message is
ATTACH
REJECT, RAU
REJECT, or
LAU REJECT.
0: This switch is
turned off. The
RNC does not
reduce
information
recorded in a
PCHR log. 19)
DTMF_SWITC
H (DTMF
Switch) 1: This
switch is turned
on. The RNC
starts tracing
after receiving a
special
RANAP_DIRE
CT_TRANSFE
R message from
a UE. 0: This
switch is turned
off. The RNC
does not start
tracing after
receiving a
special
RANAP_DIRE

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

148

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
CT_TRANSFE
R message from
a UE. 20)
FAST_CS_FB_
BASEDON_RI
M_SWITCH
(Switch for fast
CSFB based on
RIM) 1: This
switch is turned
on. The RNC
supports fast
CSFB(CS
fallback) based
on RIM. 0: This
switch is turned
off. The RNC
does not support
fast CSFB(CS
fallback) based
on RIM. 21)
L2U_SRVCC_
WITH_PS_HO
_SWITCH
Whether to
support LTE-toUMTS CS and
PS handovers
simultaneously.
1: This switch is
turned on. LTEto-UMTS CS
and PS
handovers can
happen
simultaneously.
0: This switch is
turned off. LTEto-UMTS CS
and PS
handovers
cannot happen
simultaneously.
22)
ULTRA_FLAS
H_CSFB_SWIT
CH(Ultra-Flash
CSFB Function

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

149

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
Switch)
Whether the
Ultra-Flash
CSFB function
takes effect. 1:
This switch is
turned on. The
RNC supports
the Ultra-Flash
CSFB function,
and the delay of
CSFB is
reduced,
improving user
experience. 0:
This switch is
turned off. The
RNC does not
support the
Ultra-Flash
CSFB function,
and the delay of
CSFB is long,
affecting user
experience. 23)
RNC_PS_QUE
RY_UE_IMEIS
V_SWITCH
(Support RNC
PS Querying UE
IMEISV)
Whether the
RNC sends an
Identity Request
message to the
UE, requesting
the UE's
international
mobile station
equipment
identity and
software version
(IMEISV). 1:
This switch is set
to on. The RNC
sends an Identity
Request
message to the

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

150

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
UE, requesting
the UE's
IMEISV. 0: This
switch is set to
off. The RNC
does not send an
Identity Request
message to the
UE. If this
switch is
enabled together
with the
RNC_PS_QUE
RY_UE_IMEI_
SWITCH, the
RNC queries the
UE's IMEISV,
not IMEI.
Disuse
Statement:This
switch
USRPLN_PRO
RATION_SHA
RED_ALO will
be deleted from
later versions.
Although the
configuration
interface in this
version supports
delivery of the
setting of this
switch, the
system does not
use this switch.
Therefore, this
switch is not
recommended.
GUI Value
Range:LOAD_I
RAT_HO_RNC
_FILL_TL,
SEND_IDT_JU
DGE_IU_RESE
T,
RNC_RBRECF
G_DRD_FAIL_

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

151

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
ROLLBACK_S
WITCH,
RNC_CS_QUE
RY_UE_IMEI_
SWITCH,
RNC_PS_QUE
RY_UE_IMEI_
SWITCH,
FACH_DTCH_
CONGEST_P2
D,
RNC_RBSETU
P_DRD_FAIL_
ROLLBACK_S
WITCH,
PS_NOTIFYC
N_NOTDOWN
SIZE_SWITCH
,
ASU_RSP_TIM
EOUT_HAND
LE_SWITCH,
RB_RECFG_U
SER_INACT_S
WITCH,
RRC_SCRI_N
ORM_REL_S
WITCH,
CELLUPT_RL
FAILURE_SRB
REESTAB_SW
ITCH,
CU_OVERLAP
_DSCR_SWIT
CH,
TRB_RST_DS
CR_SWITCH,
RNC_FD_SCRI
_FORCE_REL_
SWITCH,
USRPLN_PRO
RATION_SHA
RED_ALO,
FP_IUUP_TRA
CE_SWITCH,
RNC_PCHR_O
UTPUT_CTRL
_SWITCH,

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

152

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
DTMF_SWITC
H,
FAST_CS_FB_
BASEDON_RI
M_SWITCH,
L2U_SRVCC_
WITH_PS_HO
_SWITCH,
ULTRA_FLAS
H_CSFB_SWIT
CH,
RNC_PS_QUE
RY_UE_IMEIS
V_SWITCH
Unit:None
Actual Value
Range:LOAD_I
RAT_HO_RNC
_FILL_TL,
SEND_IDT_JU
DGE_IU_RESE
T,
RNC_RBRECF
G_DRD_FAIL_
ROLLBACK_S
WITCH,
RNC_CS_QUE
RY_UE_IMEI_
SWITCH,
RNC_PS_QUE
RY_UE_IMEI_
SWITCH,
FACH_DTCH_
CONGEST_P2
D,
RNC_RBSETU
P_DRD_FAIL_
ROLLBACK_S
WITCH,
PS_NOTIFYC
N_NOTDOWN
SIZE_SWITCH
,
ASU_RSP_TIM
EOUT_HAND
LE_SWITCH,
RB_RECFG_U

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

153

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
SER_INACT_S
WITCH,
RRC_SCRI_N
ORM_REL_S
WITCH,
CELLUPT_RL
FAILURE_SRB
REESTAB_SW
ITCH,
CU_OVERLAP
_DSCR_SWIT
CH,
TRB_RST_DS
CR_SWITCH,
RNC_FD_SCRI
_FORCE_REL_
SWITCH,
USRPLN_PRO
RATION_SHA
RED_ALO,
FP_IUUP_TRA
CE_SWITCH,
RNC_PCHR_O
UTPUT_CTRL
_SWITCH,
DTMF_SWITC
H,
FAST_CS_FB_
BASEDON_RI
M_SWITCH,
L2U_SRVCC_
WITH_PS_HO
_SWITCH,
ULTRA_FLAS
H_CSFB_SWIT
CH,
RNC_PS_QUE
RY_UE_IMEIS
V_SWITCH
Default
Value:LOAD_I
RAT_HO_RNC
_FILL_TL:
0,SEND_IDT_J
UDGE_IU_RE
SET:
0,RNC_RBREC

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

154

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
FG_DRD_FAIL
_ROLLBACK_
SWITCH:
1,RNC_CS_QU
ERY_UE_IMEI
_SWITCH:
0,RNC_PS_QU
ERY_UE_IMEI
_SWITCH:
0,FACH_DTC
H_CONGEST_
P2D:
0,RNC_RBSET
UP_DRD_FAIL
_ROLLBACK_
SWITCH:
0,PS_NOTIFY
CN_NOTDOW
NSIZE_SWITC
H:
0,ASU_RSP_TI
MEOUT_HAN
DLE_SWITCH:
0,RB_RECFG_
USER_INACT_
SWITCH:
0,RRC_SCRI_
NORM_REL_S
WITCH:
0,CELLUPT_R
LFAILURE_SR
BREESTAB_S
WITCH:
0,CU_OVERL
AP_DSCR_SW
ITCH:
0,TRB_RST_D
SCR_SWITCH:
0,RNC_FD_SC
RI_FORCE_RE
L_SWITCH:
0,USRPLN_PR
ORATION_SH
ARED_ALO:
0,FP_IUUP_TR
ACE_SWITCH:
1,RNC_PCHR_
OUTPUT_CTR

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

155

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
L_SWITCH:
1,DTMF_SWIT
CH:
1,FAST_CS_F
B_BASEDON_
RIM_SWITCH:
0,L2U_SRVCC
_WITH_PS_H
O_SWITCH:
0,ULTRA_FLA
SH_CSFB_SWI
TCH:
0,RNC_PS_QU
ERY_UE_IMEI
SV_SWITCH:0

DtxDrxEnablin
gDelay

BSC6900

SET UFRC

WRFD-010686

CPC - DTX /
DRX

Meaning:Delay
time for
DTX_DRX
being effective
after it is
enabled. For
details about this
parameter, see
3GPP TS
25.331.
GUI Value
Range:D0, D1,
D2, D4, D8,
D16, D32, D64,
D128
Unit:frame
Actual Value
Range:0, 1, 2, 4,
8, 16, 32, 64, 128
Default
Value:D32

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

156

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

DtxDrxEnablin
gDelay

BSC6910

SET UFRC

WRFD-010686

CPC - DTX /
DRX

Meaning:Delay
time for
DTX_DRX
being effective
after it is
enabled. For
details about this
parameter, see
3GPP TS
25.331.
GUI Value
Range:D0, D1,
D2, D4, D8,
D16, D32, D64,
D128
Unit:frame
Actual Value
Range:0, 1, 2, 4,
8, 16, 32, 64, 128
Default
Value:D32

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

157

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

RsvSwitch5

BSC6900

SET
UALGORSVP
ARA

None

None

Meaning:RRM
algorithm
reserved U32
Switch Para 5.
The 32-bit
parameter is
reserved for
further change
request use.
Disuse
statement: This
parameter is
used
temporarily in
patch versions
and will be
replaced with a
new parameter
in later versions.
The new
parameter ID
reflects the
parameter
function.
Therefore, this
parameter is not
recommended
for the
configuration
interface.
GUI Value
Range:RESER
VED_SWITCH
_5_BIT1,
RESERVED_S
WITCH_5_BIT
2,
RESERVED_S
WITCH_5_BIT
3,
RESERVED_S
WITCH_5_BIT
4,
RESERVED_S
WITCH_5_BIT
5,
RESERVED_S

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

158

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
WITCH_5_BIT
6,
RESERVED_S
WITCH_5_BIT
7,
RESERVED_S
WITCH_5_BIT
8,
RESERVED_S
WITCH_5_BIT
9,
RESERVED_S
WITCH_5_BIT
10,
RESERVED_S
WITCH_5_BIT
11,
RESERVED_S
WITCH_5_BIT
12,
RESERVED_S
WITCH_5_BIT
13,
RESERVED_S
WITCH_5_BIT
14,
RESERVED_S
WITCH_5_BIT
15,
RESERVED_S
WITCH_5_BIT
16,
RESERVED_S
WITCH_5_BIT
17,
RESERVED_S
WITCH_5_BIT
18,
RESERVED_S
WITCH_5_BIT
19,
RESERVED_S
WITCH_5_BIT
20,
RESERVED_S
WITCH_5_BIT
21,
RESERVED_S

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

159

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
WITCH_5_BIT
22,
RESERVED_S
WITCH_5_BIT
23,
RESERVED_S
WITCH_5_BIT
24,
RESERVED_S
WITCH_5_BIT
25,
RESERVED_S
WITCH_5_BIT
26,
RESERVED_S
WITCH_5_BIT
27,
RESERVED_S
WITCH_5_BIT
28,
RESERVED_S
WITCH_5_BIT
29,
RESERVED_S
WITCH_5_BIT
30,
RESERVED_S
WITCH_5_BIT
31,
RESERVED_S
WITCH_5_BIT
32
Unit:None
Actual Value
Range:RESER
VED_SWITCH
_5_BIT1,
RESERVED_S
WITCH_5_BIT
2,
RESERVED_S
WITCH_5_BIT
3,
RESERVED_S
WITCH_5_BIT
4,
RESERVED_S

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

160

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
WITCH_5_BIT
5,
RESERVED_S
WITCH_5_BIT
6,
RESERVED_S
WITCH_5_BIT
7,
RESERVED_S
WITCH_5_BIT
8,
RESERVED_S
WITCH_5_BIT
9,
RESERVED_S
WITCH_5_BIT
10,
RESERVED_S
WITCH_5_BIT
11,
RESERVED_S
WITCH_5_BIT
12,
RESERVED_S
WITCH_5_BIT
13,
RESERVED_S
WITCH_5_BIT
14,
RESERVED_S
WITCH_5_BIT
15,
RESERVED_S
WITCH_5_BIT
16,
RESERVED_S
WITCH_5_BIT
17,
RESERVED_S
WITCH_5_BIT
18,
RESERVED_S
WITCH_5_BIT
19,
RESERVED_S
WITCH_5_BIT
20,
RESERVED_S

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

161

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
WITCH_5_BIT
21,
RESERVED_S
WITCH_5_BIT
22,
RESERVED_S
WITCH_5_BIT
23,
RESERVED_S
WITCH_5_BIT
24,
RESERVED_S
WITCH_5_BIT
25,
RESERVED_S
WITCH_5_BIT
26,
RESERVED_S
WITCH_5_BIT
27,
RESERVED_S
WITCH_5_BIT
28,
RESERVED_S
WITCH_5_BIT
29,
RESERVED_S
WITCH_5_BIT
30,
RESERVED_S
WITCH_5_BIT
31,
RESERVED_S
WITCH_5_BIT
32
Default
Value:RESERV
ED_SWITCH_
5_BIT1:1,RESE
RVED_SWITC
H_5_BIT2:1,R
ESERVED_SW
ITCH_5_BIT3:
1,RESERVED_
SWITCH_5_BI
T4:1,RESERVE
D_SWITCH_5_

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

162

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
BIT5:1,RESER
VED_SWITCH
_5_BIT6:1,RES
ERVED_SWIT
CH_5_BIT7:1,
RESERVED_S
WITCH_5_BIT
8:1,RESERVE
D_SWITCH_5_
BIT9:1,RESER
VED_SWITCH
_5_BIT10:1,RE
SERVED_SWI
TCH_5_BIT11:
1,RESERVED_
SWITCH_5_BI
T12:1,RESERV
ED_SWITCH_
5_BIT13:1,RES
ERVED_SWIT
CH_5_BIT14:1,
RESERVED_S
WITCH_5_BIT
15:1,RESERVE
D_SWITCH_5_
BIT16:1,RESE
RVED_SWITC
H_5_BIT17:1,R
ESERVED_SW
ITCH_5_BIT18
:
1,RESERVED_
SWITCH_5_BI
T19:1,RESERV
ED_SWITCH_
5_BIT20:1,RES
ERVED_SWIT
CH_5_BIT21:1,
RESERVED_S
WITCH_5_BIT
22:1,RESERVE
D_SWITCH_5_
BIT23:1,RESE
RVED_SWITC
H_5_BIT24:1,R
ESERVED_SW
ITCH_5_BIT25
:

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

163

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
1,RESERVED_
SWITCH_5_BI
T26:1,RESERV
ED_SWITCH_
5_BIT27:1,RES
ERVED_SWIT
CH_5_BIT28:1,
RESERVED_S
WITCH_5_BIT
29:1,RESERVE
D_SWITCH_5_
BIT30:1,RESE
RVED_SWITC
H_5_BIT31:1,R
ESERVED_SW
ITCH_5_BIT32
:1

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

164

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

RsvSwitch5

BSC6910

SET
UALGORSVP
ARA

None

None

Meaning:RRM
algorithm
reserved U32
Switch Para 5.
The 32-bit
parameter is
reserved for
further change
request use.
Disuse
statement: This
parameter is
used
temporarily in
patch versions
and will be
replaced with a
new parameter
in later versions.
The new
parameter ID
reflects the
parameter
function.
Therefore, this
parameter is not
recommended
for the
configuration
interface.
GUI Value
Range:RESER
VED_SWITCH
_5_BIT1,
RESERVED_S
WITCH_5_BIT
2,
RESERVED_S
WITCH_5_BIT
3,
RESERVED_S
WITCH_5_BIT
4,
RESERVED_S
WITCH_5_BIT
5,
RESERVED_S

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

165

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
WITCH_5_BIT
6,
RESERVED_S
WITCH_5_BIT
7,
RESERVED_S
WITCH_5_BIT
8,
RESERVED_S
WITCH_5_BIT
9,
RESERVED_S
WITCH_5_BIT
10,
RESERVED_S
WITCH_5_BIT
11,
RESERVED_S
WITCH_5_BIT
12,
RESERVED_S
WITCH_5_BIT
13,
RESERVED_S
WITCH_5_BIT
14,
RESERVED_S
WITCH_5_BIT
15,
RESERVED_S
WITCH_5_BIT
16,
RESERVED_S
WITCH_5_BIT
17,
RESERVED_S
WITCH_5_BIT
18,
RESERVED_S
WITCH_5_BIT
19,
RESERVED_S
WITCH_5_BIT
20,
RESERVED_S
WITCH_5_BIT
21,
RESERVED_S

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

166

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
WITCH_5_BIT
22,
RESERVED_S
WITCH_5_BIT
23,
RESERVED_S
WITCH_5_BIT
24,
RESERVED_S
WITCH_5_BIT
25,
RESERVED_S
WITCH_5_BIT
26,
RESERVED_S
WITCH_5_BIT
27,
RESERVED_S
WITCH_5_BIT
28,
RESERVED_S
WITCH_5_BIT
29,
RESERVED_S
WITCH_5_BIT
30,
RESERVED_S
WITCH_5_BIT
31,
RESERVED_S
WITCH_5_BIT
32
Unit:None
Actual Value
Range:RESER
VED_SWITCH
_5_BIT1,
RESERVED_S
WITCH_5_BIT
2,
RESERVED_S
WITCH_5_BIT
3,
RESERVED_S
WITCH_5_BIT
4,
RESERVED_S

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

167

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
WITCH_5_BIT
5,
RESERVED_S
WITCH_5_BIT
6,
RESERVED_S
WITCH_5_BIT
7,
RESERVED_S
WITCH_5_BIT
8,
RESERVED_S
WITCH_5_BIT
9,
RESERVED_S
WITCH_5_BIT
10,
RESERVED_S
WITCH_5_BIT
11,
RESERVED_S
WITCH_5_BIT
12,
RESERVED_S
WITCH_5_BIT
13,
RESERVED_S
WITCH_5_BIT
14,
RESERVED_S
WITCH_5_BIT
15,
RESERVED_S
WITCH_5_BIT
16,
RESERVED_S
WITCH_5_BIT
17,
RESERVED_S
WITCH_5_BIT
18,
RESERVED_S
WITCH_5_BIT
19,
RESERVED_S
WITCH_5_BIT
20,
RESERVED_S

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

168

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
WITCH_5_BIT
21,
RESERVED_S
WITCH_5_BIT
22,
RESERVED_S
WITCH_5_BIT
23,
RESERVED_S
WITCH_5_BIT
24,
RESERVED_S
WITCH_5_BIT
25,
RESERVED_S
WITCH_5_BIT
26,
RESERVED_S
WITCH_5_BIT
27,
RESERVED_S
WITCH_5_BIT
28,
RESERVED_S
WITCH_5_BIT
29,
RESERVED_S
WITCH_5_BIT
30,
RESERVED_S
WITCH_5_BIT
31,
RESERVED_S
WITCH_5_BIT
32
Default
Value:RESERV
ED_SWITCH_
5_BIT1:1,RESE
RVED_SWITC
H_5_BIT2:1,R
ESERVED_SW
ITCH_5_BIT3:
1,RESERVED_
SWITCH_5_BI
T4:1,RESERVE
D_SWITCH_5_

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

169

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
BIT5:1,RESER
VED_SWITCH
_5_BIT6:1,RES
ERVED_SWIT
CH_5_BIT7:1,
RESERVED_S
WITCH_5_BIT
8:1,RESERVE
D_SWITCH_5_
BIT9:1,RESER
VED_SWITCH
_5_BIT10:1,RE
SERVED_SWI
TCH_5_BIT11:
1,RESERVED_
SWITCH_5_BI
T12:1,RESERV
ED_SWITCH_
5_BIT13:1,RES
ERVED_SWIT
CH_5_BIT14:1,
RESERVED_S
WITCH_5_BIT
15:1,RESERVE
D_SWITCH_5_
BIT16:1,RESE
RVED_SWITC
H_5_BIT17:1,R
ESERVED_SW
ITCH_5_BIT18
:
1,RESERVED_
SWITCH_5_BI
T19:1,RESERV
ED_SWITCH_
5_BIT20:1,RES
ERVED_SWIT
CH_5_BIT21:1,
RESERVED_S
WITCH_5_BIT
22:1,RESERVE
D_SWITCH_5_
BIT23:1,RESE
RVED_SWITC
H_5_BIT24:1,R
ESERVED_SW
ITCH_5_BIT25
:

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

170

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
1,RESERVED_
SWITCH_5_BI
T26:1,RESERV
ED_SWITCH_
5_BIT27:1,RES
ERVED_SWIT
CH_5_BIT28:1,
RESERVED_S
WITCH_5_BIT
29:1,RESERVE
D_SWITCH_5_
BIT30:1,RESE
RVED_SWITC
H_5_BIT31:1,R
ESERVED_SW
ITCH_5_BIT32
:1

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

171

WCDMA RAN
CPC Feature Parameter Description

7 Parameters

Parameter ID

NE

MML
Command

Feature ID

Feature Name

Description

NODEBRSVD
PARA1

BTS3900,
BTS3900
WCDMA

SET
NODEBRSVD
PARA

None

None

Meaning:Indicates the NodeB

reserved
parameter 1.

LST
NODEBRSVD
PARA

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

GUI Value
Range:RSVDBI
T1(Reserved
Switch 1),
RSVDBIT2
(Reserved
Switch 2),
RSVDBIT3
(Reserved
Switch 3),
RSVDBIT4
(Reserved
Switch 4),
RSVDBIT5
(Reserved
Switch 5),
RSVDBIT6
(Reserved
Switch 6),
RSVDBIT7
(Reserved
Switch 7),
RSVDBIT8
(Reserved
Switch 8),
RSVDBIT9
(Reserved
Switch 9),
RSVDBIT10
(Reserved
Switch 10),
RSVDBIT11
(Reserved
Switch 11),
RSVDBIT12
(Reserved
Switch 12),
RSVDBIT13
(Reserved
Switch 13),
RSVDBIT14
(Reserved
Switch 14),

172

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
RSVDBIT15
(Reserved
Switch 15),
RSVDBIT16
(Reserved
Switch 16),
RSVDBIT17
(Reserved
Switch 17),
RSVDBIT18
(Reserved
Switch 18),
RSVDBIT19
(Reserved
Switch 19),
RSVDBIT20
(Reserved
Switch 20),
RSVDBIT21
(Reserved
Switch 21),
RSVDBIT22
(Reserved
Switch 22),
RSVDBIT23
(Reserved
Switch 23),
RSVDBIT24
(Reserved
Switch 24),
RSVDBIT25
(Reserved
Switch 25),
RSVDBIT26
(Reserved
Switch 26),
RSVDBIT27
(Reserved
Switch 27),
RSVDBIT28
(Reserved
Switch 28),
RSVDBIT29
(Reserved
Switch 29),
RSVDBIT30
(Reserved
Switch 30),

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

173

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
RSVDBIT31
(Reserved
Switch 31),
RSVDBIT32
(Reserved
Switch 32)
Unit:None
Actual Value
Range:RSVDBI
T1, RSVDBIT2,
RSVDBIT3,
RSVDBIT4,
RSVDBIT5,
RSVDBIT6,
RSVDBIT7,
RSVDBIT8,
RSVDBIT9,
RSVDBIT10,
RSVDBIT11,
RSVDBIT12,
RSVDBIT13,
RSVDBIT14,
RSVDBIT15,
RSVDBIT16,
RSVDBIT17,
RSVDBIT18,
RSVDBIT19,
RSVDBIT20,
RSVDBIT21,
RSVDBIT22,
RSVDBIT23,
RSVDBIT24,
RSVDBIT25,
RSVDBIT26,
RSVDBIT27,
RSVDBIT28,
RSVDBIT29,
RSVDBIT30,
RSVDBIT31,
RSVDBIT32
Default
Value:RSVDBI
T1:OFF,
RSVDBIT2:OF
F,
RSVDBIT3:OF
F,

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

174

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
RSVDBIT4:OF
F,
RSVDBIT5:OF
F,
RSVDBIT6:OF
F,
RSVDBIT7:OF
F,
RSVDBIT8:OF
F,
RSVDBIT9:OF
F,
RSVDBIT10:O
FF,
RSVDBIT11:O
FF,
RSVDBIT12:O
FF,
RSVDBIT13:O
FF,
RSVDBIT14:O
FF,
RSVDBIT15:O
FF,
RSVDBIT16:O
FF,
RSVDBIT17:O
FF,
RSVDBIT18:O
FF,
RSVDBIT19:O
FF,
RSVDBIT20:O
FF,
RSVDBIT21:O
FF,
RSVDBIT22:O
FF,
RSVDBIT23:O
FF,
RSVDBIT24:O
FF,
RSVDBIT25:O
FF,
RSVDBIT26:O
FF,
RSVDBIT27:O
FF,

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

175

WCDMA RAN
CPC Feature Parameter Description

Parameter ID

NE

7 Parameters

MML
Command

Feature ID

Feature Name

Description
RSVDBIT28:O
FF,
RSVDBIT29:O
FF,
RSVDBIT30:O
FF,
RSVDBIT31:O
FF,
RSVDBIT32:O
FF

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

176

WCDMA RAN
CPC Feature Parameter Description

8 Counters

Counters

Table 8-1 Counter description

Counter ID

Counter Name

Counter
Description

NE

Feature ID

Feature Name

50331748

VS.CPC.DTXC
fg.UserNum

Number of
UL_DTX users
in a cell

NodeB

Multi-mode:
None

CPC - DTX /
DRX

GSM: None
UMTS:
WRFD-010686
LTE: None

50331749

VS.CPC.DTXA
ct.UserNum

User Numbers
with the status of
UL_DTX and
actived
Configuration

NodeB

Multi-mode:
None

CPC - DTX /
DRX

GSM: None
UMTS:
WRFD-010686
LTE: None

50331750

VS.CPC.DRXC
fg.UserNum

Number of
DL_DRX users
in a cell

NodeB

Multi-mode:
None

CPC - DTX /
DRX

GSM: None
UMTS:
WRFD-010686
LTE: None

50331751

VS.CPC.DRXA
ct.UserNum

User Numbers
with the status of
UL_DRX and
actived
Configuration

NodeB

Multi-mode:
None

CPC - DTX /
DRX

GSM: None
UMTS:
WRFD-010686
LTE: None

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

177

WCDMA RAN
CPC Feature Parameter Description

8 Counters

Counter ID

Counter Name

Counter
Description

NE

Feature ID

Feature Name

50331752

VS.CPC.LesOp
Cfg.SceduledN
um

Number of users
in Less mode in
a cell

NodeB

Multi-mode:
None

CPC - HSSCCH less

operation

GSM: None
UMTS:
WRFD-010687
LTE: None

50331753

VS.CPC.LesOp
Cfg.LesModeN
um

Issue Draft A (2014-01-20)

Schedule
Numbers to the
user configured
Less opration
Mode and
actually used
less transferred

NodeB

Multi-mode:
None
GSM: None

CPC - HSSCCH less

operation

UMTS:
WRFD-010687
LTE: None

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

178

WCDMA RAN
CPC Feature Parameter Description

9 Glossary

Glossary

For the acronyms, abbreviations, terms, and definitions, see Glossary.

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

179

WCDMA RAN
CPC Feature Parameter Description

10 Reference Documents

10

Reference Documents

1.

3GPP TS 25.214, "Multiplexing and channel coding (FDD)"

2.

3GPP TS 25.321, "Medium Access Control (MAC) protocol specification"

3.

3GPP TS 25.212, "Physical layer procedures (FDD)"

4.

HSDPA Feature Parameter Description

5.

HSUPA Feature Parameter Description

6.

Radio Bearers Feature Parameter Description

7.

Transmission Resource Management Feature Parameter Description

8.

Power Control Feature Parameter Description

9.

Handover Feature Parameter Description

10. State Transition Feature Parameter Description

11. DC-HSDPA Feature Parameter Description
12. DC-HSUPA Feature Parameter Description
13. DB-HSDPA Feature Parameter Description
14. MC-HSDPA Feature Parameter Description
15. Flexible Dual Carrier HSDPA Feature Parameter Description

Issue Draft A (2014-01-20)

Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

180