Scribd
Upload
1K views

4.1.2.4 Lab - Identifying Network Devices and Cabling

The document describes a lab activity where students will identify different network devices and cabling by filling out identification tables. They will record information about network equipment such as manufacturer, model, type, functionality and physical characteristics. They will also identify and describe different types of network media including copper, fiber optic and wireless.

Uploaded by

Andrey Nochvay
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
1K views

4.1.2.4 Lab - Identifying Network Devices and Cabling

The document describes a lab activity where students will identify different network devices and cabling by filling out identification tables. They will record information about network equipment such as manufacturer, model, type, functionality and physical characteristics. They will also identify and describe different types of network media including copper, fiber optic and wireless.

Uploaded by

Andrey Nochvay
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Lab A - Identifying Network Devices and Cabling

Objectives
Part 1: Identify Network Devices

Describe the functions and physical characteristics of the network device.

Part 2: Identify Network Media

Describe the functions and physical characteristics of the media.

Background / Scenario
As a member of the networking support staff, you must be able to identify different networking equipment.
You must also understand the function of equipment in the appropriate part of the network. In this lab, you will
have access to network devices and media. You will identify the type and characteristics of the network
equipment and media.

Part 1: Identify Network Devices


Your instructor will provide various network devices for identification. Each will be tagged with an ID number.
Fill in the table below with the device tag ID number, manufacturer, device model, type (hub, switch, and
router), functionality (wireless, router, switch, or combination), and other physical characteristics, such as
number of interface types. The first line is filled out as a reference.

2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.

Page 1 of 3

Lab A - Identifying Network Devices and Cabling

ID

Manufacturer

Cisco

Model

1941

Type

Router

Functionality

Router

Physical Characteristics
2 GigabitEthernet Ports
2 EHWIC slots
2 CompactFlash slots
1 ISM slot
2 Console ports: USB, RJ-45

Part 2: Identify Network Media


Your instructor will provide various network media for identification. You will name the network media, identify
the media type (copper, fiber optic, or wireless), and provide a short media description including what device
types it connects. Use the table below to record your findings. The first line in the table has been filled out as
a reference.

2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.

Page 2 of 3

Lab A - Identifying Network Devices and Cabling

ID

Network Media

UTP

Type

Copper

Connect wired NIC and Ethernet ports on network devices


Cat 5 straight-through wired. Connects PCs and routers to
switches and wiring panels.

Twisted-Pair

Copper

Wires are twisted to prevent against crosstalk


Used for telephone communication and modern Ethernet
networks

Shielded
Twisted-Pair

Copper

Wires are wrapped in foil and twisted to prevent crosstalk and


outside interference

Coaxial

Copper

connects networks
can run for longer distances than utp

Description and to What It Connects

4
Wireless

uses radio frequencies to transmit data


used for cellular phones, satellite

Reflection
After you have identified the network equipment, where would you find more information about the
equipment?
On manufacturer's website

2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.

Page 3 of 3

You might also like