NOZZLE, FLANGES FROM NPS 1.5 TO 24= ASME B16.

ABOVE NPS 24 TO 60= ASME B 16.47

BOILERS= ASME SECTION I

Subsection A - General Requirements

Part UG - General Requirements for All Methods of Construction and All Materials

Materials: UG-4 through to UG-15

Design: UG-16 through to UG-35

Openings and Reinforcements: UG-36 through to UG-46

Braced and Stayed Surfaces: UG-47 through to UG-50

Fabrication: UG-75 through to UG-85

Inspection and Tests: UG-90 through to UG-103

Marking and Reports: UG-115 through to UG-120

Overpressure Protection: UG125 through to UG-140

Subsection B - Requirements Pertaining to Methods of Fabrication of Pressure

Part UW - Requirements for Pressure Vessels Fabricated by Welding

General: UW-1 through to UW-3

Materials: UW-5

Design: UW-8 through to UW-21

Fabrication: UW-26 through to UW-42

Inspection and Tests: UW-46 through to UW-54

Marking and Reports: UW-60

Pressure Relief Devices: UW-65

Part UF - Requirements for Pressure Vessels Fabricated by Forging

General: UF-1

Materials: UF-5 through to UF-7

Design: UF-12 through to UF-25

Fabrication: UF-26 through to UF-43

Inspection and Tests: UF-45 through to UF-55

Marking and Reports: UF-115

Pressure Relief Devices: UF-125

Part UB - Requirements for Pressure Vessels Fabricated by Brazing

General: UB-1 through to UB-3

Materials: UB-5 through to UB-7

Design: UB-9 through to UB-22

Fabrication: UB-30 through to UB-37

Inspection and Tests: UB-40 through to UB-50

Marking and Reports: UB-55

Pressure Relief Devices: UB-60

Subsection C - Requirements Pertaining to Classes of Materials

Part UCS - Requirements for Pressure Vessels Constructed of Carbon and Low Alloy
Steels

General: UCS-1

Materials: UCS-5 through to UCS-12

Design: UCS-16 through to UCS-57

Low Temperature Operation: UCS-65 through to UCS-68

Fabrication: UCS-75 through to UCS-85

Inspection and Tests: UCS-90

Marking and Reports: UCS-115

Pressure Relief Devices: UCS-125

Nonmandatory Appendix CS: UCS-150 through to UCS-160

Part UNF - Requirements for Pressure Vessels Constructed of Nonferrous Materials

General: UNF-1 through to UNF-4

Materials: UNF-5 through to UNF-15

Design: UNF-16 through to UNF-65

Fabrication: UNF-75 through to UNF-79

Inspection and Tests: UNF-90 through to UNF-95

Marking and Reports: UNF-115

Pressure Relief Devices: UNF-125

Appendix NF: Characteristics of the Nonferrous Materials (Informative and

Part UHA Requirements for Pressure Vessels Constructed of High Alloy Steel

General: UHA-1 through to UHA-8

Materials: UHA-11 through to UHA-13

Design: UHA-20 through to UHA-34

Fabrication: UHA-40 through to UHA-44

Inspection and Tests: UHA-50 through to UHA-52

Marking and Reports: UHA-60

Pressure Relief Devices: UHA-65

Appendix HA: Suggestions on the Selection and Treatment of Austenitic Chromium

Part UCI - Requirements for Pressure Vessels Constructed of Cast Iron

General: UCI-1 through to UCI-3

Materials: UCI-5 through to UCI-12

Design: UCI-16 through to UCI-37

Fabrication: UCI-75 through to UCI-78

Inspection and Tests: UCI-90 through to UCI-101

Marking and Reports: UCI-115

Pressure Relief Devices: UCI-125

Part UCL - Requirements for Welded Pressure Vessels Constructed of Material With
Corrosion Resistant Integral Cladding, Weld Metal Overlay Cladding, or With Applied Linings

General: UCL-1 through to UCL-3

Materials: UCL-10 through to UCL-12

Design: UCL-20 through to UCL-27

Fabrication: UCL-30 through to UCL-46

Inspection and Tests: UCL-50 through to UCL-52

Marking and Reports: UCL-55

Pressure Relief Devices: UCL-60

Part UCD - Requirements for Pressure Vessels Constructed of Cast Ductile Iron

General: UCD-1 through to UCD-3

Materials: UCD-5 through to UCD-12

Design: UCD-16 through to UCD-37

Fabrication: UCD-75 through to UCD-78

Inspection and Tests: UCD-90 through to UCD-101

Marking and Reports: UCD-115

Pressure Relief Devices: UCD-125

Part UHT Requirements for Pressure Vessels Constructed of Ferritic Steels With Tensile
Properties Enhanced by Heat Treatment.

General: UHT-1

Materials: UHT-5 through to UHT-6

Design: UHT-16 through to UHT-57

Fabrication: UHT-75 through to UHT-86

Inspection and Tests: UHT-90

Marking and Reports: UHT-115

Pressure Relief Devices: UHT-125

Part ULW Requirements for Pressure Vessels Fabricated by Layered Construction

Introduction: ULW-1 through to ULW-2

Materials: ULW-5

Design: ULW-16 through to ULW-26

Welding: ULW-31 through to ULW-33

Nondestructive Examination of Welded Joints: ULW-50 through to ULW-57

Fabrication: ULW-75 through to ULW-78

Inspection and Tests: ULW-90

Marking and Reports: ULW-115

Pressure Relief Devices: ULW-125

Part ULT Alternative Rules for Pressure Vessels Constructed of Materials Having Higher
Allowable Stresses at Low Temperature

General: ULT-1 through to ULT-5

Design: ULT-16 through to ULT-57

Fabrication: ULT-76 through to ULT-86

Inspection and Tests: ULT-90 through to ULT-100

Marking and Reports: ULT-115

Pressure Relief Devices: ULT-125

Part UHX - Rules for Shell-and-Tube Heat Exchangers

General: UIG-1 through to UIG-3

Materials: UIG-5 through to UIG-8

Design: UIG-22 through to UIG-60

Fabrication: UIG-75 through to UIG-84

Inspection and Tests: UIG-90 through to UIG-112

Marking and Reports: UIG-115 through to UIG-121

Pressure Relief Devices: UIG-125

MANDATORY APPENDICES: 1 through to 44

NONMANDATORY APPENDICES: A through to NN

BOILERS & PRESSSURE VESSEL (HIGH PRESSURE)= ASME SECTION VIII DIV.2
STORAGE TANKS= API
MIN. SPOOL LENGTH= 75mm
NPS VALUE ABOVE 12 IS EQUAL TO ITS OUTER DIA
ALL OPEN TOP TANKS REQUIRE TOP WIND GRIDER REGARDLESS OF ITS
HEIGHT & THICKNESS