Scribd
Upload
45 views20 pages

L2 State Processe

Thermodynamics Lecture 2 covered key concepts including: 1. A system's state is defined by its thermodynamic properties and can be in thermal equilibrium. 2. A process is a change in a system's equilibrium state due to interactions across its boundary. 3. Work is the mechanical energy transferred when forces act to change a system's volume, while heat is the energy transferred due solely to temperature differences. 4. Work done by a system is calculated as the path-dependent integral of pressure with respect to volume change, and can be positive or negative depending on perspective.

Uploaded by

Samuel Tan Juan Yu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
45 views20 pages

L2 State Processe

Thermodynamics Lecture 2 covered key concepts including: 1. A system's state is defined by its thermodynamic properties and can be in thermal equilibrium. 2. A process is a change in a system's equilibrium state due to interactions across its boundary. 3. Work is the mechanical energy transferred when forces act to change a system's volume, while heat is the energy transferred due solely to temperature differences. 4. Work done by a system is calculated as the path-dependent integral of pressure with respect to volume change, and can be positive or negative depending on perspective.

Uploaded by

Samuel Tan Juan Yu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 20

Mech. Eng.

Sci 5
ThermoFluid B58EE

Thermodynamics Lecture 2:
Thermodynamics State and processes
Work done and heat
Baixin Chen
E Mail: [email protected]
Tel: 451 4305
Room 1.22 James Nasmyth Building

Timetables Updated
Lectures, weeks 2 to 8
Monday,
Tuesday,
Wednesday,
Wednesday,

09.15 in LT4
12.15 in PGG01
10:15 in LT1
13:15 in PGG01 (?)

(Thermo from week2)


(usually Thermo)
(usually Thermo)
(Fluid from week 2)

Thursday,

16.15 in LT3

(usually Fluid)

Tutorial classes, weeks 2 to 12


1 hr per week on Wednesday 13:15 in EM244 (wks 2 9)

Laboratory classes, weeks 9 to 12


2

One Thermodynamics laboratory


One Fluid Mechanics laboratory

Last week:
Basic definitions:

Thermodynamic systems
Closed System and Open System
Thermal properties

Ref: Chapter 1.1 1.3 of Applied Thermodynamics by Eastop & McConkey, 5th Edition

Today:
Description of system

Thermal State and processes


Work and Heat

Ref: Chapter 1.3 1.5 of Applied Thermodynamics by Eastop &


McConkey, 5th Edition
3

2.1. States and Processes


State of a system: Condition of the system that
can be described completely by
thermal properties (P, T, v, ..)
boundary

m = 2.0 kg
T2 = 350 K
V2 = 2.5 m3

The state 1 of the


thermal system

The state 2 of the


thermal system

m = 2.0 kg
T1 = 300K
V1 = 1.5 m3

2.1 (b) Thermal Equilibrium State


Equilibrium: No unbalanced
potentials within the system
20OC

State 2

P2

25 OC
30 OC

35 OC

40OC

P1

Sate 1

42 OC
T1

Non-TE state
20OC

21 OC

20 OC
20 OC
P1 20OC
20 OC
Quasi-TE state

50OC

T
T2
P-T diagram
51 OC

50 OC
50 OC
P2 50OC
50 OC
Quasi-TE state

2.1 (b-II) Thermal Equilibrium (TE) State


Equilibrium state: Can be
described, in general, by
two properties, such as P
and T, or P and v, or .

State 2

P2

P1

Example:

Sate 1

State1: P = 1.0 bar and T = 20 oC

T1

State 2: P = 5.0 bar and T = 50 oC

20OC

21 OC

20 OC
20 OC OP1 = 1.0 bar O
20 C
20 C
Quasi-TE state 1

50OC

T
T2
P-T diagram
51 OC

50 OC
50 OC O P2= 5 bar O
50 C
50 C
Quasi-TE state 2

10

2.1 (c) Other Equilibrium


Mechanical Equilibrium:
Forces (P, ..) balanced in the system
Phase Equilibrium:
No changes in Phases in the system at given
state, but changes in phase may occur from
state to state

Chemical Equilibrium:
No change in components in the system at
given state, but changes in components may
occure from state to state

11

2.2 Thermal Process


Definition of a Thermal
process:
Changes that a system
undergoes from one
equilibrium state to another
due to interactions
(heat/work) crossing system
boundary.

State 2

P2
Process 2

P1

21 OC

Heating 2

Sate 1

T1

Note: Direction & interactions

20OC

Process 1

50OC

T
T2
P-T diagram
51 OC

20 OC
50 OC
20 OC
P1 20OC
50 OC
P2 50OC
Heating 1
20 OC
50 OC
Quasi-TE state
Another Quasi-TE state

Summary of 2.1 and 2.2


State:
The condition of the system is called state. The state
of a system is described by a set of thermodynamic
properties.
Is independent of processes and interactions

Equilibrium state,
No unbalanced potential within the system at given
state
T = 0; Thermal Equilibrium
P=0; F = 0; Mechanical Equilibrium
Yk = 0 Chemical equilibrium

Thermal process
Change in TE states due to interactions (W, Q)
crossing system boundary. (direction;
interactions dependent)

13

2.3 (a) Interactions of a Thermal System I: Work


Interactions across the boundary of system:

Work:
Form of mechanical energy
Definition: Work is done by a system if the
sole effect on the surrounding could be the
raising of a weight.
(Note: raising of a weight means mechanical energy)
Q Surroundings, Tsurr

m, V, Tsys, P,
Paddle Wheel

W
1
4

2.3 (a) Interactions of a Thermal System I: Work


1). Work done by a
closed system:
Moving boundary work

2). Work done by an


open system:
Shaft work

Surroundings, Tsurr

m, V
P, Tsys, ..

Moving
boundary work:

Surroundings

Shaft work:

Ws

1
5

2.3 (b). Work done +ve or ve?


For system: Work done by a
system on the surroundings is
negative
Surroundings
W+

W_
System

For system: Work done on a


system by the surroundings is
positive
Surroundings
W_

W+
System

16

2.4: Work Done by a close system


A: area of the piston
piston

Process path

F
2
p

dx
Work = W = F dx
F = p A (linked the property of system
(P and A) to surrounding (F) by assumption of no friction
between piston and cylinder), then we have:

W = p A dx = p dV,

V2

V1 V

and

W1,2 =

p(V) dV = m
1

W1,1,2 =

p(v) dv = Area 12V2V11 (in above p-v diagram)


2

p(V) dV p(V) dV = Area 11 2 V2V11 (in above p-v diagram)


1

*: Work is path (process) dependent

17

Example of work done


pw = Mass x Gravity/ Area
= 100 x 9.81 / 0.2
= 4905 Pa
p0 = 101,000 Pa

Metal disc
Mass = 100 kg
Area=0.2m2

p
pw
0

p0
pw

p = pw + p0= 101,000 + 4905


= 105905 Pa (N/m2)
2

Work Done =

P(V) dV
2

= P dV = P (V2 V1)
1

= 105,905 (N/m2) x (3-1) (m3)


= 211819 J (N-m)= 212. kJ

18

2.4 (a). Summary of the work


Path A
o Work Done is path
dependent

o Acting to the system


crossing the boundary
Path B

o Can be only calculated by


state properties by
assumption of no friction
(reversible process)

19

2.4 (b). Interactions of a Thermal System II: Heat


Surroundings, Tsurr

Interactions across the boundary of system:

Heat:
Form of Thermal Energy
Definition: Heat is the energy transferred across
the boundary of a system to another system or
the surrounding solely driving by temperature
difference (T=T2T1 or T= Tsys - Tsurr)

m, V
P, Tsys, ..

Q Surroundings, Tsurr

m, V, Tsys, P,
Paddle Wheel

W
20

2.4 (c). Heat interaction +ve or ve ?

Surrounding

Q+

Heat transferred into the


system is positive

Q_

Heat transferred from a


system is negative

System

21

Note on variables in thermodynamics (1)


There are only two kinds of thermal variables
Property and Interaction
1). The properties of system: P, T, V, v, ., which are the
variables independent of processes.
o Those properties are designated by dx, where x is some
property, and d represents an exact differential.
o

The change of the property (x) from state 1 to state 2 can be


calculated by,
2

dx

= x2 x1

For example: If x represents pressure (P):


2

dP = P

1
2

dT
1

P 1 = P

If X represents temperature (T):

= T2 T1 = T

22

Note on variables in thermodynamics (2)


2: The interaction variable: W and Q
o
o

W and Q are the variable depending on the process


interacting with system.
Work, (W) is designated by W, where W is an
interaction variable dependant on the process. W is
a function of path (processes), and represents an
inexact differential

For example, the moving boundary work can be calculated by:


2

W 1 2 =

W
1

= p ( V ) dV
1

The results depending on what the relation between P and V: P(V)

Same as Heat Q

23

Summary
Sate, Equilibrium, and process
Work interaction is path dependent:
W =

V2

V1

p(V ) dV

Next Lecture
Calculation of work
First Law of Thermodynamics
Note: Wednesday Lecture from week 2:
12:15 13:15 in EC 203
24

You might also like