Real Estate Modeling

Quick Reference Real Estate Development

http://breakingintowallstreet.com

The Real Estate Development Process

While real estate development models may look complex, the actual concepts are simpler than what you see
for normal companies.
Real estate development modeling is different because its more granular, happens in months rather than years,
and because you start with nothing and generate revenue only when the building is complete.
If youre acquiring real estate thats already operational, its more like modeling a normal company see the
hotel acquisition and renovation tutorial for more on that.

Step 1: Determine the Size, Parameters and Construction Timeline for the Property
Lot and Unit Assumptions - Bateman Apartments
Lot Square Meters:
Minimum Square Meters Per Unit:
Apartment Units:
Average Apartment Unit Size:

You start with the Lot Size in square feet or square meters,
and then base the number of units, rooms, or gross area of
10,000 sq. m.
the building on that. In more complex models you look at
50 sq. m.
200 the FAR (Floor Area Ratio) and local zoning requirements
to determine the exact size.
50 sq. m.

Also in more complex models, you would distinguish between Gross Area and Rentable Area, especially for
office and retail developments the Rentable Area is always smaller due to walls, elevators, stairs, and so on.
Next, you estimate the average rent per square foot or square meter, or per unit if its an apartment complex;
for hotels you would look at the Average Daily Rate (ADR) per room instead.
You also determine the operating expenses and property taxes
per unit or per square foot or square meter at this stage.
If your building has a parking structure attached, you
estimate the spots required for that as well; that may be based
on an assumed number of spots per unit or per rentable
square foot / square meter.

Average Monthly Rent Per Square Meter:

Average Monthly Parking Fees Per Spot:
Average Monthly Rent Per Unit:

$
$
$

50.00
150.00
2,500

Monthly Operating Expenses Per Unit:

Monthly Property Taxes Per Unit:
Total OpEx and Taxes Per Unit:

300.00
150.00
450.00

Required Parking Spots Per Unit:

Parking Spots:
Assumed Vacancy Rate at Stabilization:

Finally, you should pick a stabilized Vacancy Rate to reflect

the fact that youll never fill the building 100% with tenants at any given time.

You speak with local real estate agents, other developers, and property owners in the area to determine the
proper figures to use for all of the metrics above.
Pre-Construction # Months:
Construction Start Month:
Construction # Months:
Rental Period Start Month:

3
4
6
10

The Construction Timeline may be either simple or

complex depending on your model in this example

1.5
300
5.0%

Real Estate Modeling

Quick Reference Real Estate Development
http://breakingintowallstreet.com
with only 1 year, we include only the Pre-Construction, Construction, and Post-Construction periods.
In a more complex model over many years, you would also include events such as the Tenant Move-In Dates
(rather than assuming everyone moves in at once), the FF&E and TI purchase dates, and so on.
You may also assume a Sale Date here to indicate the exact month in which the building will be sold.

Step 2: Estimate the Revenue, Expenses, and NOI for the Property
Annual Property Income Statement:
Gross Potential Annual Apartment Revenue:
Gross Potential Annual Parking Revenue:
Less: Vacancy Allowance:
Annual Net Revenue:
Annual Operating Expenses:
Annual Property Taxes:
Total Property-Level Expenses:

$ 6,000,000
540,000
(327,000)
6,213,000
720,000
360,000
1,080,000

This is the easy part: Rental Income is rentable area * average

rent per square foot or square meter; you could also use units
for apartments, or rooms, days, and the ADR for hotels.
Parking Revenue is based on the number of spots times the
monthly fees times the months in a year.

You must also subtract the Vacancy Allowance to determine

net revenue (except for hotels, where you normally look at the
occupancy rate as part of the revenue buildup) the entire building will never be fully occupied.
Current Year Net Operating Income:

$ 5,133,000

So if you were expecting to earn $100,000 in Rental Income but you also expect a 5% Vacancy Rate, you would
net the $5,000 against the $100,000 to get $95,000 in net revenue.
Operating expenses and property taxes are based on the cost per unit, room, square foot, or square meter and
the total area or units/rooms.
Then, Net Revenue Operating Expenses Property Taxes = Net Operating Income.
In more complex models, you also have to account for the fact that revenue scales up over time as tenants
move in, and you have to decide on Gross Area vs. Rentable Area when calculating expenses.

Step 3: Estimate the Development Costs for the Project

The main expense categories are Land Acquisition Costs, Hard Costs, Soft Costs, FF&E, and Tenant
Improvements (see the Real Estate Development Key Terms PDF for definitions).
Project Cost Assumptions - Bateman Apartments
Project Costs:
Hard Costs and FF&E:
Soft Costs:
Land Acquisition Costs:
Capitalized Interest:
Total Project Cost:

Per Unit:
Total:
$ 130,000 $26,000,000
50,000 10,000,000
70,000 14,000,000
684,809
$50,684,809

You can go in-depth and project all of these on a fixed cost +

variable cost (tied to square feet/meters) basis (see the office
development course for an example of that).
Or you can stay at a high level and estimate lump sum amounts
for everything (see estimates on the left).

Real Estate Modeling

Quick Reference Real Estate Development
http://breakingintowallstreet.com

You must also include hidden costs such as Capitalized Financing fees, the Operating Deficit, and the
Origination Costs of Debt.
This part is tricky because theres inherent circularity you can determine these expenses only once youve
already built the rest of the model.
The convention in real estate is to assume that loan interest is capitalized when the building is still under
construction; the Operating Deficit corresponds to the period when you start paying expenses but do not yet
have sufficient net income to cover everything.
With all of these expenses, you need to speak with local real estate agents, developers, and property owners to
get a sense of what your building might cost based on its size, location, and function the numbers here are
not necessarily representative of a real property.

Step 4: Create a Sources & Uses Schedule and Determine the Debt and Equity Levels
Once you know the Total Development Costs (TDC) you can assume a Loan-to-Cost (LTC) Ratio, an interest
rate on the debt, and determine the required debt and equity:
Project Cost Assumptions - Bateman Apartments
Project Costs:
Hard Costs and FF&E:
Soft Costs:
Land Acquisition Costs:
Capitalized Interest:
Total Project Cost:

Per Unit:
Total:
$ 130,000 $26,000,000
50,000 10,000,000
70,000 14,000,000
684,809
$50,684,809

Debt & Equity Assumptions:

Loan to Cost (LTC) Ratio:
Debt Interest Rate:
Required Equity:
Loan Amount:
Equity Amount:

70.0%
8.0%
30.0%
$ 35,479,366
15,205,443

In a more complex model, you would include both Developer Equity and Investor Equity, and you might
have multiple tranches of debt (such as Senior Notes and Mezzanine) with different interest rates.
The proper amounts for all of these and the Loan-to-Cost Ratio are based on comparable property
developments you would use whatever nearby, similar buildings have done recently.
You might need those additional equity levels and additional tranches of debt because investors are only
willing to invest up to a certain amount you, the developer, might only have $3 million to invest, in which
case you would need to recruit 3rd party investors to cover the rest of the equity.

Step 5: Build an Income Statement Down to Net Operating Income or Net Income

Real Estate Modeling

Quick Reference Real Estate Development
http://breakingintowallstreet.com
This part involves checking which
Development Phase youre in and then
linking in the appropriate numbers.
In this example, we assume a stabilized
Vacancy Rate and 100% of monthly net
revenue and monthly expenses as soon as
construction finishes.

might add the following:

In more complex models (see the office

development example on the site), we

1. Scale up revenue over time as more tenants move in over many months;
2. Model in expenses before revenue, since it takes a while to attract tenants and sign leases;
3. Assume a higher Vacancy Rate until it declines to a stabilized level.
Ideally, you will also project Interest Expense to calculate Net Income rather than the NOI weve stopped at
above here, it doesnt matter much because the NOI is more than sufficient to cover cash interest.
But if it were not, we would need to draw on additional debt or equity.
Normally you dont look at Depreciation in real estate development models, but you may include it in real
estate acquisition models if the property is already built; it doesnt make a difference because you would add it
back when calculating cash flows anyway (and there are no corporate taxes, so no tax savings either).

Step 6: Distribute the Development Costs and Determine the Debt and Equity Required
In this model, we simply straight-line expenses over the Pre-Construction and Construction Phases:

In more complex models, you might create a normalized distribution schedule for Hard Costs and something
more random for Soft Costs; others such as FF&E, TIs, and Land Acquisition Costs would be straight-lined.

Real Estate Modeling

Quick Reference Real Estate Development
http://breakingintowallstreet.com
You pay for the Land Acquisition Costs in the Pre-Construction phase; Hard Costs occur mostly in the
Construction Phase; Soft Costs are distributed throughout all phases; and you pay for FF&E and TIs in the
Post-Construction Phase, just before the tenants move in (simplified in the example above).
Unlike an LBO, where you pay for everything upfront, with real estate development the expenses occur
gradually over time.
Thats important because the debt and equity draws (see below) also occur over time, which affects the
internal rate of return (IRR).

Step 7: Draw on Equity and Debt as Necessary

You assume that you draw on equity until you reach the maximum amount that you can draw on.
For example, if you have a maximum draw of $10 million and you need $5 million in the first month, you can
use equity for that first $5 million. But if you need $10 million in the second month, you must use a
combination of debt and equity since you only have $5 million of equity remaining to draw on.

The Funds Required above equals the Total Construction Costs + Capitalized Interest Net Operating
Income; in a more complex model you would use Net Income rather than NOI to capture the cash interest
expense, and youd take into account Loan Origination Costs and the Operating Deficit as well.
When you have multiple equity investors and multiple tranches of debt, you start with Developer Equity first,
then draw on Investor Equity, then Mezzanine, and then Senior Notes (riskiest least risky).
Then, based on the average debt balances (or the beginning debt balances to avoid circularity), you can
calculate the Interest Expense each month and link that up to the income statement.

Step 8: Assume an Exit Cap Rate and Stabilized NOI, and Determine the Net Sale Proceeds
Just as with an LBO model, its impossible to earn an acceptable IRR unless you sell the property in the future.

Real Estate Modeling

Quick Reference Real Estate Development
http://breakingintowallstreet.com

Thats because the cash flows over the months or years that you own the property dont come close to what
you earn when you sell it. In an LBO model, you assume an exit multiple, and in a real estate development
model you assume an Exit Cap Rate:

This Exit Cap Rate should be based on what similar properties in the area have sold for recently.
The Stabilized NOI After Maintenance CapEx line item here just means, After we account for revenue and
expense inflation a certain number of years into the future, and we subtract out the required Maintenance
CapEx each year, what is our Net Operating Income at that future date?
You dont have to take into account inflation and Maintenance CapEx, but it is common to see in real estate
models. Its more important if youre looking at the property over 3-5 years rather than 1 year, because
inflation is much more significant then.
You take into account inflation because both rent and expenses increase over time, and you take into account
Maintenance CapEx because most buyers will subtract that from the NOI figures you quote.
To determine the Net Sale Proceeds, you must also subtract the Selling Costs (similar to paying for the
financial advisors in an M&A deal) and the remaining Debt Principal that must be repaid.

Step 9: Calculate the Internal Rate of Return (IRR)

You could use either the IRR or XIRR function for this (XIRR is for when the cash flows occur on an irregular
schedule).
You track the Equity Invested each month with negative signs and then link in the Net Sale Proceeds at the
end of the period.

Real Estate Modeling

Quick Reference Real Estate Development
http://breakingintowallstreet.com
In more advanced models this gets complicated when you have features like Developer Promotes i.e. the
developer gets a higher percentage when the IRR reaches a certain level but in the basic model here its as
simple as calculating the IRR in an LBO model:

If you want to see how this can get more complex, take a look at the office development lessons on the site, in
particular the one on Allocating Returns where we go through a full waterfall schedule.
That isnt a requirement, but you will sometimes see that type of schedule in real estate if the investors want to
incentivize the developers to perform well.
One final note: the return here is exceptionally high because of the compressed timeline, and because our
assumption for the Exit Cap Rate is quite aggressive (7.0% vs. the Yield on Cost figure of 10.3%).
In real life, investors aim for a 20-25% IRR, similar to what private equity firms target in a leveraged buyout.