What Is Flight Testing?

Or

"How Do We Know Something Will Fly Right?"

Grades 5-8
Objective: Upon completing this lesson, the student will be able to explain the
flight testing process. They will be able to describe testing maneuvers and the
forces that define their motion.
National Science Standards:
Standard A: Science as inquiry - Abilities necessary to do scientific
inquiry
Standard B: Physical Science - Position and motion of objects
Vocabulary:
Flight Testing method to determine how well a vehicle performs in the air
Flight Vehicle - airplane, helicopter, balloon, rocket, anything that flies
through the air.
Axis System graphical way to represent forces and moments acting on an
aircraft.
Maneuvers controlled motions of an aircraft along a flight path
Force a push or pull that causes movement of an object
Moments rotation of a body that occurs when a force is applied
Lift - upward force
Thrust - forward force
Weight/gravity - downward force
Drag - backward force

Websites:
http://www.grc.nasa.gov/WWW/K-12/airplane/forces.html
Forces of flight
http://www.ehow.com/how_2247750_explain-bernoullis-theoremexperiment-kids.html#ixzz1PIpjwHo6
How to Explain Bernoulli's Theorem Experiment to Kids | eHow.com
http://www.grc.nasa.gov/WWW/K-12/BGA/BGAindex.html
Aerospace Activities and Lessons
http://www.grc.nasa.gov/WWW/K12/TRC/Aeronautics/AeronauticActivitiesHome2.htm
Aeronautics Classroom Activities
http://www.grc.nasa.gov/WWW/K-12/aerores.htm
Aerospace Resources
http://women.nasa.gov/a2i/
Women in Science, Technology, Engineering & Math Careers Info

What Is Flight Testing?

Flight testing is a method to gather information, called data, which will describe
how a particular vehicle will perform. Flight testing of a vehicle is done when
very little data exists to prove that the vehicle will be safe and perform as desired.
The data obtained from flight tests are then used to design future vehicles. In flight
testing various motions, called maneuvers, are used to obtain this data. These
maneuvers will be discussed later.
What Is An Axis System?
To understand the data that comes from a flight test, it is necessary to understand
what an axis system is. An axis system is a graphical way to show how forces,
moments, and other test data describe aircraft motion. Aircraft motion is described
in terms of motion in three different directions, in which each direction is a
different axis. Figure 1 shows the direction of these motions. The translational or
straight line motion of an aircraft can be described as movement forward and back
in the x-direction, movement side to side in the y-direction, and up and down in the
z-direction. The 3 pictures below on the left side of the page show these motions.
The rotational motion of an aircraft can be described as rotation around the same x,
y, and z axes, where pitch rotation, where the nose rotates up or down, is around
Figure 1

Source: NASA

the y-axis, roll rotation, where one wing rotates up or down, is around the x-axis,
and yaw rotation, where the nose rotates right or left, is around the z-axis. The 3
pictures on the right side of the previous page show these rotations.
What Is Performance?
Once we know what an axis system is, we can describe how the aircraft performs
in the air. Performance refers to the motion of the airplane along its flight path,
forward and aft, up or down, right or left, as described on the axis system. The
term "Performance" also refers to how fast, how slow, how high and how far. It
may also refer to the ability of an airplane to successfully do its job, or what it is
trying to accomplish. Performance includes such items as minimum and
maximum speed, maximum altitude, maximum rate of climb, maximum range and
speed, rate that fuel is used, distance to take-off and land, and the weight of what it
can carry.
What Are Flight Test Maneuvers?
Maneuvers are the motions of the aircraft done by the pilot to determine aircraft
performance. A maneuver is a translational or rotational motion of the aircraft
during a flight test to obtain performance data. There are specific test maneuvers
which are used to measure these performance qualities for each airplane.
Sometimes, flight testing is a competition to select the best airplane to do a
particular job. All of the performance measurements are strongly affected by
differences in the weather conditions, such as temperature, pressure, humidity, and
wind.
What Is a Flight Envelope?
Source:
NASA

Figure 2

The graph in Figure 2 shows how much

a particular aircraft can do. The graph is
a plot of altitude on the vertical axis and
speed on the horizontal axis.
The
orange-colored area is called the flight
envelope. The orange area shows at
what altitudes and at what speeds the
aircraft can fly. The left edge of the
orange flight envelope is the minimum
speed in which the aircraft can safely fly.
4

Any slower and the aircraft will stall and begin to fall. The right edge of the
orange graph is the maximum speed the aircraft can fly at that altitude due to
engine power. The very top of the orange graph shows the maximum altitude for
the aircraft. The flight envelope is determined by obtaining flight test data.
What is Stability?
Stability refers to the rotational motion of an airplane about its three axes; roll,
pitch, and yaw. "Stability" is defined as the tendency of an object to return to its
initial position when it is disturbed or moved from its initial position.
What Is a Stable Condition?
Figure 3 shows the three cases of
stability. In case (3a), a marble
placed in the bottom of a shallow
trough is said to be stable. When
moved, the marble will tend to return
to that resting place at the bottom of
the trough. It may overshoot and
move (or oscillate) back and forth,
but it will continue to seek the lowest
point in the trough (see the red line in
the trough). Static stability is a
Source: NASA
Figure 3
measure of how quickly the marble
will return to the bottom of the trough. A trough with steep sides will result in a
higher level of static stability for the marble than one with shallow sides. This
motion that results from a statically stable condition is called "oscillatory".
What Is a Neutral Condition?
If we set the marble on a flat table (Figure 3b), there is no tendency for it to return
to its initial position. The marble will stay in any location that it is placed on the
table. This condition is called "neutral stability". The motion resulting from a
condition of neutral stability is called "non-oscillatory".

What Is an Unstable Condition?

If we turn the trough upside down (Figure 3c), we can balance the marble at one
point on the top of the trough, but when disturbed it will tend to move away from
the balance point at an increasing rate. This is an example of an unstable
condition, or "static instability". The motion that results from static instability is
called a "divergence".
What Is Damping?
Damping is resistance to motion. Damping
Source: NASA
only exists when actual movement is
occurring. For an airplane, it is usually
characterized as being proportional to the
rate of movement, or velocity. (Note that
"velocity" can be either translational speed, or rotational - revolutions).
Figure 4
Damping is usually related to some form
of friction. In Figure 4, if we line the
trough referred to in the stability example with a towel, the marble will still seek
the lowest point in the trough (still statically stable), but the towel has increased the
friction between the marble and the smooth sides. The marble will not move as
rapidly and will not oscillate back and forth as much as in the previous example
(Figure 3a). The towel has added damping to the motion of the marble.
What Are Specific Maneuvers?
A maneuver is defined as the controlled change of flight path by changing the
speed and direction of an airplane. A highly maneuverable airplane, such as a
fighter plane, has a capability to
accelerate or slow down very quickly,
and also to turn sharply, Figure 5.
Quick, sharp turns place large forces on
the wings, as well as the pilot. These
forces, or loads, are referred to as "g
forces" and the ability to "pull g's" is
considered
one
measure
of
maneuverability. One g is the force
Source: NASA
acting on the airplane in level flight Figure 5
6

imposed by the gravitational pull of the earth. Five gs in a maneuver means that
5 times the gravitational force of the earth is felt by the airplane and the pilot.
Flight tests of other aircraft, such as a passenger plane, experiences much lower
gs while in flight.

Fact Sheet
Flight Testing
"Forces of Flight"
Four Forces of Flight
Lift, thrust, weight, drag
Sir Isaac Newton (1642 - 1727)
First presented his three laws of motion in the "Principia Mathematica
Philosophiae Naturalis" in 1686.
Newton's Laws of Motion
Newton's First Law of Motion states that a body at rest will remain at
rest unless an outside force acts on it, and a body in motion at a constant
velocity will remain in motion in a straight line unless acted upon by an
outside force.
The Second Law of Motion states that if an unbalanced force acts on a
body, that body will experience acceleration ( or deceleration), that is, a
change of speed.
The Third law of Motion states that for every action force there is
always an equal and opposite reaction force.
Bernoulli's Principle
States that an increase in the speed of moving air or a flowing fluid is
accompanied by a decrease in the air or fluid's pressure.

Flight Testing
K-W-L
K-

What do I know about flight testing?

________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________

W-

What do I want to know about flight testing?

________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________

L-

What did I learn about flight testing?

________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________