Safety instructions for product with Lithium battery .....................

4
Features .............................................................. 7
Glossary .............................................................. 7
Front panel ........................................................... 8
Interface ............................................................. 10
Introduction of Main Menu ............................................ 10
1. DVB-S/S2 System .................................................. 10
2. DVB-T System and DVB-C System ................................... 11
Operating Description ................................................ 12
a) SAT FIND.................................................... 12
1. DVB-S/S2 System ......................................... 12
2. DVB-T/T2 System .......................................... 15
3. DVB-C System ............................................ 17
b) Level ........................................................ 18
1. DVB-S/S2 System ......................................... 18
2. DVB-T/T2 System ......................................... 19
3. DVB-C System............................................ 19
c) Spectrum.................................................... 20
1. DVB-S/S2 System ......................................... 20
2. DVB-T/T2 system .......................................... 21
3. DVB-C System ............................................ 21
IV. Constellation.................................................. 22
1. DVB-S/S2 system ......................................... 22
2. DVB-T/T2 system .......................................... 24
3. DVB-C system ............................................ 25
V. USB......................................................... 25
1. PS Record ................................................ 26
2. TS-CH Record ............................................. 26
3. TS-TP Record ............................................. 26
4. Media Player .............................................. 26
5. TS- Parses ................................................ 29
VI. DiSEqC Kits ................................................. 31
1. Description of Menu Item .................................. 31
2. Description of Menu Information ........................... 33
3. Description of Menu Help .................................. 33
VII. GPS......................................................... 33
1. Description of Menu Information ............................ 33
VIII. Local Sat .................................................. 34
When you first entry to the local sat menu, need to wait for GPS data .... 34
1. Description of Menu Item .................................. 34
2. Description of Menu Information ........................... 35
3. Description of Menu Help .................................. 35
2

IX. Emulation ................................................... 36

1. Description of Menu Item .................................. 36
2. Description of Menu Information ........................... 37
X. System ...................................................... 37
1. System settings ........................................... 37
2. System information ........................................ 38
3. System password ......................................... 38
4. CA ....................................................... 38
5. CI ........................................................ 38
6. USB upgrade............. Fel! Bokmrket r inte definierat.
7. USB backup ............. Fel! Bokmrket r inte definierat.
8. PING ..................................................... 39
9. Internet local setting ....................................... 39
10. Internet Upgrade .......................................... 40
11. Factory Default ............................................ 40
XI. Specifications ............................................... 41

Safety instructions for product with Lithium battery

WARNING: Do not use this product in place where is possible to touch or

immerse in water. Do not put the product near ower vase, washbowls, kitchen
sinks, laundry tubs, swimming pools, etc.
WARNING: Do not place it near the fire or heater. Please keep the working
temperature within -20 to 60 degrees centigrade to prevent danger of re.
WARNING: As unit is with rechargeable lithium battery built-in, for the first time
use, please plug the power into the DC port until it is full charged and the unit can
only be charged with the matched adaptor.
WARNING: In case of leakage, overheating, explosion or fire, dont dismantle or
change the battery, or solder the battery. Consult your local dealer for technical
service if it is required to open
WARNING: Dont charge the battery with charging source that exceeds the
specified range
WARNING: Do not use the charger when there is short circuit or damage of the
power source, or it may possibly lead to damage to the charger, fire or even
electric shock.
WARNING: Dont charge in wet environment, for example bathroom. Keep it
away from water containers.
WARNING: Dont pull the adaptor, touch the power or power socket with wet
hand in case of electric shock, or other personal injury.
WARNING: Dont charge in the environment where there is direct sunlight, high
temperature, wet air or high vibration. Please make sure charging temperature
range from 0 to 45 degrees centigrade.
WARNING: Please charge every three mouths when stored for a long time
without use, otherwise it may possibly damage the product. Please make sure
4

storing temperature range from -20 to 45 degrees.

Note: To ensure proper use of this product, please read this User manual
carefully and retain for further reference.
Attachments: Never add any attachments or equipment without manufacturer
consent, or it may result in the risk of fire, electric shock, or other injury.
Object and Liquid Entry: Never open to put any kind of objects into this METER,
as they may touch dangerous voltage points or short-out parts that could result in
re or electric shock. Never spill any liquid on the METER.
Note: Moisture may be formed on the lens in the following conditions:
when the unit is suddenly moved from a cold environment or an air-condition
room to a warm place.
after a heater has been turned on immediately.
in a steamy or very humid room.
If the moisture forms inside the unit, it may not operate properly. To fix this
problem, turn on the power and wait about two hours, until the moisture
evaporates.
Parts Replacement: When the unit parts need to be replaced, user should make
sure the service technician use the replacement parts specied by the
manufacturer or having the same characteristics as the original part.
Unauthorized replacement may put the unit in the risk of re, electric shock or
other hazards.
Safety Check: When all the maintenances and repairs are done, user is required
to request the service technician to conduct an overall safety check to ensure the
machine is in the proper condition.
2. Environment protection

Attention!
The symbol above indicates that the used products cannot be mixed with other
waste, and it requires proper disposal..
Information on Disposal for Users (private households) in the European
Union
Used electrical and electronic equipment must be treated separately and in
accordance with legislation that requires proper treatment, recovery and recycling
of used electrical and electronic equipment. Following the implementation by
5

member states, private households within the EU states may return their used
electrical and electronic equipment to designated collection facilities free of
charge. In some countries, your local retailer may also take back your old product
without charge if you purchase a new similar one. Please contact your local
authority for further details. If your electrical or electronic equipment has batteries
or accumulators, please dispose of these separately beforehand according to
local requirements. By disposing of this product correctly, you will help ensure that
the waste undergoes the necessary treatment, recovery and recycling, to prevent
potential negative eects on the environment and human health, which could
otherwise arise due to inappropriate waste handling.
3Basic parameter
Rated Capacity
Storing temperature
Charge temperature
Working temperature
SYMBOL

4100mAH
-2040
045
-2060
CHARGE LEVEL
75%~100%
30%~75%
10%~30%
<10%
Charge in progress

Battery Charging
To fully charge the battery, connect the instrument to the external DC charger
without activating the power on process. The time it takes to recharge it depends
on the condition of the battery, if they are very low, it will take about 4 hours and
the charger indicator should remain lit.
When the battery charging process is completed with the instrument
Off, the fan will stop.
Importance:
The instrument battery needs to be kept charging between 30% and 50% of
its capacity when it is not in work. The battery needs to be fully charged for best
result.

Features
Full Measurement for DVB-S2 & DVB-T2 & DVB-C
Asynchronous Serial Interface Supported
Annex A/C Supported by DVB-C tuner
Real-time and multi-Analyzing Spectrum
Constellation Chart
GPS /LCN
BER, S/N (MER), FEC Measurement
Auto Search, Blind Search, NIT Search, Manual Search
Satellite Name & Degree Auto Detective & Display
Auto DiSEqC1.0/DiSEqC1.1/DiSEqC1.2, USALS
MDU & Unicable
Local satellites list showing automatically
Transport Stream Recording Supported
H.264 HDTV 1080P
AV-OUT for External Display, TV
AV-IN Function for STB
Easy upgrading by Ethernet & USB & RS232 Port
Satellite List Editable by Editor via PC
FTP, Data Backup
Conax/CA Embedded
Common Interface Supported
13V/18V, 22K supported
Dish Antenna Angle Calculator
Multi-Language OSD: English, German, French, Spanish, Italian, etc.
Global/Local Satellite list
Build-in GPS receiver
7 Inch High Definition TFT LCD Screen
LED (Red/Green) & Audio Indication for Signal Lock

Glossary
Selecting the measurements
The type of measurements available depends on the operating band
(cable/terrestrial of satellite).
1. DVB-S/S2 System
Level: Level measurement of the currently tuned carrier
C/N: Ratio between the modulated signal power and the equivalent noise
power for a same bandwidth
MER: Modulation error ratio
CBER: BER measurement (Bit error rate) for the digital signal before error
correction (BER before FEC)
VBER: BER measurement (Bit error rate) for the digital signal after error
7

correction (BER before Viterbi)

2. DVB-C and DVB-T system
Chanel power: Channel power is measured assuming that power spectral
density is uniform throughout channel bandwidth.
To measure it correctly, it is indispensable to define the
CHANNEL BW.
C/N: out-channel measurement, Noise level is measured at f noise=ftuning1/2*
Channel BW, to measure it correctly digital channel must be tuned at its
central frequency
MER: Modulation error ratio
CBER: BER measurement (Bit error rate) for the digital signal before error
correction (BER before FEC)
VBER: BER measurement (Bit error rate) for the digital signal before error
correction (BER after FEC)

Front panel

(1) number keyboard: press number key to select channel

(2) cursors: through the different menus and submenus that appear in the monitor
8

(3) main key board: 16 keys to select functions and entering alphanumeric data
0/22K: switch 22k ON or OFF during watching TV programs
H/V: switch polarity to Horizontal or Vertical during watching TV programs
Local sat: display the local sat menu during watching TV programs
DiSEqC: press this key move to DiSEqC kits menu
GPS: press this key move to GPS menu
Level: display the Level menu during watching TV programs
Spectrum: display the spectrum menu during watching TV programs
Constellation: display the constellation menu during watching TV programs
USB: display the USB menu during watching TV programs
Find: display the SAT find menu during watching TV programs
: To switch BNC or F-type connect
The LED remains lighted when the equipment works with the connected
type
: To switch DVB-Satellite, Cable or Terrestrial TV system
The led remains lighted when the equipment works with the TV system
: To switch AV signal input or output
The led remains lighted when the equipment works with the AV signal
status
: Display the emulation menu during watching TV programs

: Press save key to save setting parameters

: Press this key can exit the current menu to last menu or close the current
menu, and display the main menu during watching TV programs
(4) Function key: different function on the submenus
F4: one of its functions is to power on/off the equipment: press F4 key
for more than three seconds until the presentation screen appears;
(5) Rotary selector-button: this has many different functions
Press one time to enter to the menu; turning, moving between the various on
screen menus and submenus, and valid of the different options;
Its also as a reset button: enable the user to restart the instrument if any
irregularity when operating (hold the rotary selector pressed for six
seconds)
(6) LED display: display signal strength
When the equipment is connected to the POWER, the charger LED remains
lighted
9

(7) Indicator light: display LNB status

(8) Monitor: 7 Inch High Definition TFT LCD Screen
(9) Gradienter: measure if the device has been placed horizontal

Interface
HDMI: Audio and Video output socket for TV set with HDMI Input Jack only.
Ethernet: Network port, you can get a new software update from this port.
RS232: To transfer the data to PC by RS-232 cable
CA: supported Conax condition access
USB: 1 USB2.0 Port, USB media player to play back the media in USB flash disk
or USB HDD or USB card reader with memory card.
CI: support common interface
AV IN/OUT: to switch AV signal input for equipment or output for external
equipment
DVB-S/S2 F-Female connector: Connect the coaxial cable from LNB of your Dish
by F-female connector
DVB-S/S2 BNC: Connect the coaxial cable from LNB of your Dish by BNC
connector
T2/T/C connector: Connect the coaxial cable

Introduction of Main Menu

1. DVB-S/S2 System

There are ten menu items in the Main menu, as following:

1.

Sat Find:

Used for program searching.

2.

Level:

Used for connecting the antenna and set DiSEqc

3.

Spectrum:
10

Used to display and save the spectrum within a frequency range

4.

Constellation:

Used to display the signal phase and quality of current frequency

5.

USB:

Used to display and save the spectrum within a frequency range

6.

DiSEqc Kits:

Used to display the signal phase and quality of current frequency

7.

GPS:

Used to show local geography information and the number of GPS Sat in use

8.

Local Sat:

Used to view and search the local satellite

9.

Emulation:

Used for calculating the required azimuth, elevation angle and polarization angle

10.

System

Including property settings for the system, USB upgrade or backup, Internet setup
and upgrade, and restore to factory defaults.

2. DVB-T System and DVB-C System

1 Find:
Used for program searching.
2 Level:
Used for connecting the antenna and set DiSEqc
3 Spectrum:
Used to display and save the spectrum within a frequency range
4 Constellation:
Used to display the signal phase and quality of current frequency
5 USB:
Used to display and save the spectrum within a frequency range
6. System
Including property settings for the system, USB upgrade or backup, Internet setup
and upgrade, and restore to factory defaults.

11

Operating Description
a)

SAT FIND
1.

DVB-S/S2 System
On the DVB-S/S2 system, press S2/T2/C key to switch other system when
the focus on the main menu

1.1 Description of Menu Item

1) Satellite:
Options of the satellite name and satellite longitude. Press the OK key to get a
drop-down list, move the cursor with the arrow keys and press the OK button to
select the desired satellite.
2) LNB Freq:
LNB Frequency option. Press the OK key to get a drop-down list, move the cursor
with the arrow keys and press the OK button to select the desired LNB frequency.
3) Transponder:
Transponder option which include three parameters: frequency, polarization and
symbol rate. Press the OK key to get a drop-down list, move the cursor with the
arrow keys and press the OK button to select the desired transponder.
4) 22K:
22K switch which include On and Off options. There is no need to make choice as
it becomes Auto when the LNB Freq is selected Universal.
5) Scan type:
Search Type options. Press the OK key to get a drop-down list, move the cursor
with the arrow keys and press the OK button to select the desired search type.
6) Start scan:
Press the button, it will start program searching by the scan type you choose.
1.2 Description of Menu Information
1) Level:
Show the strength of signal.
12

2) Quality:
Show the quality of signal.
3) BER:
Short of Bit Error Rate, show the error rate of signal.
4) Sat Name Identify:
Show satellite name or satellite longitude detected from the network
automatically.
1.3 Description of Menu Help
1) F1:
Press to enter the Satellite edit menu.

On the satellite edit menupress[RED] button to Edit satellite when the cursor on
the satellite list, you can edit the satellite name and longitude

Press [Green] button to add the satellite

13

[Blue] button to delete the satellite

2) F2:
Press to enter the transponder edit menu.

On the transponder edit menu,

- [Red] key: To edit TP Frequency / Symbol Rate / Polarity

14

- [Green] key: To add a new TP

- [Yellow] key: To delete the certain TP which you dont want.

- [Blue] key: It is used to begin to search a selected TP in the TP list which is

highlighted.

2.

DVB-T/T2 System

15

On the DVB-T/T2 system, press S2/T2/C key to switch other system when the
focus on the main menu

2.1 Description of Menu Item

1) Auto search

On the Auto search mode, the equipment will scan channel by default
transponder list
2) Manual search

When the cursor on the Search, press OK key to start channel search by current
transponder
16

The manual search support NIT search when your select Network search mode is
ON
The Antenna power mode support OFF/5V/12V/24V
3) Level information

On the level information menu will display some transponder level information
You can press F1 button to setting transponder form CH01 to CH 08

3.

DVB-C System
On the DVB-C system, press S2/T2/C key to switch other system when the
focus on the main menu
3.1 Description of Menu Item

1) Auto search

17

On the auto search mode, the equipment will scan channel by default
transponder
2) Manual search

On the manual search modethe equipment will scan channel by current

parameter
The equipment will detector the symbol rate with network

b)

Level
1.
DVB-S/S2 System
On the DVB-S/S2 system, press S2/T2/C key to switch other system when the
focus on the main menu
1.1 Description of Menu Item
1) Satellite:
Options of the satellite name and satellite longitude. Press the OK key to get a
drop-down list, move the cursor with the arrow keys and press the OK button to
select the desired satellite.
2) LNB Freq:
LNB Frequency option. Press the OK key to get a drop-down list, move the cursor
with the arrow keys and press the OK button to select the desired LNB frequency.
3) Transponder:
Transponder option which include three parameters: frequency, polarization and
symbol rate. Press the OK key to get a drop-down list, move the cursor with the
arrow keys and press the OK button to select the desired transponder.
4) 22K:
22K switch which include On and Off options. There is no need to make choice as
it becomes Auto when the LNB Freq is selected Universal.
5) DiSEqc1.0:
DiSEqc1.0 port option. Press the OK key to get a drop-down list, move the cursor
with the arrow keys and press the OK button to select the satellite connection
port.
6) DiSEqc1.1:
DiSEqc1.1 cascading options, including first cascade port and second cascade
port. Press the OK key to get a drop-down list, move the cursor with the arrow
keys and press the OK button to select the desired Cascade type and port.
18

7) Motor Type:
Motor type options, including Fixed, Diseqc1.2 and USALS. Press the
key or
key to select the motor type used.
8) Limit setup:
This menu item exists only when the Motor Type is chose Diseqc1.2 or USALS.
Press the button to enter the Motor limit position setup menu.
1.2 Description of Menu Information
1) Level:
Show the strength of signal.
2) Quality:
Show the quality of signal.
2. DVB-T/T2 System
On the DVB-S/S2 system, press S2/T2/C key to switch other system when the
focus on the main menu

2.1 Description of Menu Item

1) Frequency
When focusing on the Frequency option, press the OK key to get a drop-down list,
move the cursor with the arrow keys and press the OK button to select the desired
frequency.
2) Bandwidth
When focusing on the bandwidth option, press the OK key to get a drop-down list,
move the cursor with the arrow keys and press the OK button to select the desired
bandwidth
3) Network search
2.2 Description of Menu Information
Display the parameter information of the current signal (like C/NPowerMER
CBERVBER)
3.

DVB-C System

On the DVB-S/S2 system, press S2/T2/C key to switch other system

19

3.1 Description of Menu Item

1 Frequency
When focusing on the Frequency option, press the OK key to get a drop-down list,
move the cursor with the arrow keys and press the OK button to select the desired
frequency.
3.2 Description of Menu information
Display the parameter information of the currently signal (like C/NPowerMER
CBERVBER)

c)

Spectrum
1. DVB-S/S2 System
1.1 Description of Menu Information

1) Start:
Start frequency of spectrum.
2) End:
End frequency of spectrum.
3) Cur:
Current frequency of spectrum, marked with a green vertical line.
4) Span:
Frequency coverage of spectrum

20

Move the Rotary selector-button to moving the focus

Press Spectrum key to switch FFT and AGC mode
Press Level key to switch different display scale
1.2 Description of Menu Help
1) FREQ:
Press F1 key to set Start and End frequency of spectrum.
2) Span:
Press F2 key to set Frequency coverage of spectrum.
3) File:
Press F3 key to Capture the Current picture and save in the USB device
4) Locking:
Press F4 key to locking the current frequency
2.

DVB-T/T2 system

1) Start:
Start frequency of spectrum.
2) End:
End frequency of spectrum.
3) Cur:
Current frequency of spectrum, marked with a green vertical line.
4) Span:
Frequency coverage of spectrum
Move the Rotary selector-button to moving the focus
1.3 Description of Menu Help
1) FREQ:
Press F1 key to set Start and End frequency of spectrum.
2) Span:
Press F2 key to set Frequency coverage of spectrum.

3.

DVB-C System

21

1) Start:
Start frequency of spectrum.
2) End:
End frequency of spectrum.
3) Cur:
Current frequency of spectrum, marked with a green vertical line.
4) Span:
Frequency coverage of spectrum
Move the Rotary selector-button to moving the focus
1.4 Description of Menu Help
1) FREQ:
Press F1 key to set Start and End frequency of spectrum.
2) Span:
Press F2 key to set Frequency coverage of spectrum.

IV. Constellation
1.

DVB-S/S2 system

1.1 Description of Menu Information

22

1) xxxMHz:
Frequency of current TP
2) QPSK:
Displays the current phase, there may be QPSK, 8PSK, 16PSK or 32PSK.
3) BER:
Short of Bit Error Rate: show the error rate of signal.
4) FEC:
Short of Forward Error Correction, display FEC rate of the current frequency
signal
5) C/N:
Displays signal carrier to noise ratio of the current frequency.
6) MER:
Display modulation error ratio of the current frequency
7) Power:
Display the signal quality of the current frequency
8) Sat Name Identify:
Display the actual satellite name and satellite longitude of current frequency when
signal is locked.
1.2 Description of Menu Help
1) F1: Press to enter the TP LIST menu, choose a certain TP to display its
constellation.

23

2) F2: Press to enter the level menu, which displays information of current satellite
constellation, including satellite name, satellite longitude, current TP parameters,
C/N, power, MER, BER

3) F3: Press to caption the current screen

2. DVB-T/T2 system

1.1 Description of Menu Information

1xxxMHz:
Frequency of current TP
2TX Mode:
Modulation mode
3RAGER:
The number of current carriers received
1.2 Description of Menu Help
1) F2:
Press F2 to edit modulation mode

24

2) F3:
Press F3 key to Capture the Current picture and save in the USB device
3.

DVB-C system

1.1 Description of Menu Information

1) xxxMHZ:
Frequency of current TP
2BER:
Short of Bit Error Rate: show the error rate of signal
3C/N:
Displays signal carrier to noise ratio of current frequency.
4) Power:
1.2 Description of Menu Help
1) F3:
Press F3 key to Capture the Current picture and save in the USB device

V.

USB

25

1.
PS Record
Press this key, the recording program is PS stream.
When highlight on the PS Record item, press ok key to start recording of current
program with PS stream format.
You can press STOP key to stop the current recording.
2.
TS-CH Record
When highlight on the TS-CH record item, press ok key to start recording of
current program with TS stream format.
3.
TS-TP Record
When highlight on the TS-TP record item, press ok key to start recording of
current transponder with TS stream format.
4.
Media Player
If you want to view media files which are stored in your USB device, select Music,
Photo or Movie in the main menu. The screen shows up the supported MP3 files
stored in your USB device.
Note: If no USB Memory Device (like HDD or USB Memory Stick) inserted to the
equipment, this menu will be not available.

26

This menu provides the media playback functions, including 4 kinds of Media type,
Record, Music, Image, Video; users can switch the present playing type by
pressing F1 button, in the top of the menu, the highlight icon shows the media
type.
1). In Music menu, you can choose the Music file (MP3 file) and enjoy the music.

Green key: To sort by some mode

2) The menu for Photo offers the similar functions with the music menu. See
Music Menu for the detailed Photo operation.
Green key: To sort by some mode with photo file.
Yellow key: To display all of picture with multi-view mode

27

3) The menu for video offers the similar functions with the music menu

Press F2 key to sort by some mode

You can do fast forward, fast backward and seek with

trick keys on
remote controller.
FB (fast backward) and FF (fast forward) keys support x2, x4, x8, x16, x24.
PLAY / PAUSE keys: to pause and play the file when you press play / pause
key.
STOP key: To stop the playing file.
PREV key: To move to the previous file.
28

NEXT key: To move to the next file.

STEP key: To Jump forward by chapter.

The menu of record

Press F2 key to rename the recording file

You can do fast forward, fast backward and seek with
trick keys on
remote controller.
FB (fast backward) and FF (fast forward) keys support x2, x4, x8, x16, x24.
PLAY / PAUSE keys: to pause and play the file when you press play / pause
key.
STOP key: To stop the playing file.
PREV key: To move to the previous file.
NEXT key: To move to the next file.
STEP key: To Jump forward by chapter.
5.
TS- Parses
1). Connect USB storage device, enter TS Parse menu:

2). Select TS file which is required to analyze:

3). Press OK button:

29

4). Press green button to enter TS grammar:

5). Press number keyboard to insert PCR data, then it will show detail analysis:

6. Safe remove usb

Choose safe remove usb option, press OK button to unmount file system,and
take out usb equipment safely
7. USB upgrade
Press to enter USB upgrading menu when the USB is connected.
30

When you enter Upgrade by USB menu, you can download new software to
this receiver by external USB memory device. (Upgrade Mode has options: total
flash, firmware, user date).
1) total flash : You can upgrade whole file to you equipment flash. Please
rename your new file name to be the format .abs, which means any other
string is acceptable, but the extension name must be .abs. Then Press OK key
to start upgrade by USB.
When you use the total flash mode, please makesure the Battery is
fully charged
2) firmware : the upgrade without bootloader
8. USB backup
Press to enter USB backup menu when USB is connected.
When you enter Backup by USB menu, you can store the changed
parameters and searched channels, etc.
1) Insert the external USB memory device to USB slot of this receiver.
2) Select the mode you want to backup among user data, total flash, etc.
3) Press start to start backup for USB memory device.

VI. DiSEqC Kits

1. Description of Menu Item
1) Satellite:

Options of the satellite name and satellite longitude. Press the OK key to get a
drop-down list, move the cursor with the arrow keys and press the OK button to
select the desired satellite.
2) LNB Freq:

31

LNB Frequency option. Press the OK key to get a drop-down list, move the cursor
with the arrow keys and press the OK button to select the desired LNB frequency.
3) Transponder:
Transponder option which includes three parameters: frequency, polarization and
symbol rate. Press the OK key to get a drop-down list, move the cursor with the
arrow keys and press the OK button to select the desired transponder.
4) 22K:
22K switch which include On and Off options. There is no need to make choice as
it becomes Auto when the LNB Freq is selected Universal.
5) Diseqc1.0:
Diseqc1.0 port option. Press the OK key to get a drop-down list, move the cursor
with the arrow keys and press the OK button to select the satellite connection
port.
6) Diseqc1.1:
Diseqc1. 1 cascading options, including first cascade port and second cascade
port. Press the OK key to get a drop-down list, move the cursor with the arrow
keys and press the OK button to select the desired Cascade type and port.
7) Motor Type:
Motor type options, including Fixed, Diseqc1.2 and USALS. Press the
key or
key to select the motor type used.
NOTE: How to set-up DiSEqC 1.2 Motor or USALS Positioner
DiSEqC 1.2 Set-up
Go to Motor Setting to setup the followings..
Position No. & Save: You can press [Vol +/-] key or number key to input
Position No.
Go to X: You can go to X-position or go to reference.
West / East : To adjust antenna position to EAST or WEST by pressing
<VOL> button
Save: After select Satellite and Position No & Save, press [OK] to save
the position.
Recalculation: Press [OK] key to recalculate the position of satellite
antenna motor.
Delete All: To delete all satellite positions. This item is only valid in
DiSEqC1.2 Mode.
Limit Setup :
- To setup the East limit and West limit of antenna position by pressing
[VOL +/-] keys. Press OK button to save the each limits.
- Go to Reference: If you press [OK] key, it will go to the center position
of the positioner.
USALS Set-up
Input the Local Longitude and Local Latitude of your present location. And,
USALS can move dish automatically.
Go to Motor Setting to setup the followings
Select satellite and transponder to move the dish to the right place.
32

 Limit Setup :
- To setup the East limit and West limit of antenna position by pressing
[VOL +/-] keys. Press OK button to save the each limits.
- Go to Reference: If you press [OK] key, it will go to the center position
of the positioner.
8) Limit setup:
This menu item exists only when the Motor Type is chose Diseqc1.2 or USALS.
Press the button to enter the Motor limit position setup menu.
2. Description of Menu Information
1) Level:
Show the strength of signal.
2) Quality:
Show the quality of signal.
3. Description of Menu Help
1) F1:
Press to enter Auto Diseqc1.0 menu, which can detect the satellites connected to
Diseqc1.0 port automatically.
2) F2:
Press to show the constellation corresponding to current satellite and
transponder.
3) F3:
Press to set the Beep ON/OFF
4) F4
Press to show the LEVEL menu

VII. GPS
1. Description of Menu Information
Enter GPS, it will show local geography information, including heading, longitude,
latitude, altitude, and UTC time, and it will also the number of GPS Sat in use.

33

VIII.

Local Sat

When you first entry to the local sat menu, need to wait for GPS data

If accept the GPS data, the Location will display location longitude and latitude

1.
Description of Menu Item
1) Location:
Press the F4 key to get a drop-down list, move the cursor with the arrow keys and
press the OK button to select a certain location. At this point, the screen will show
all satellites within 40 degrees of longitude around the region, including the green
marked indicating the current satellite.
Press the F3 key to display local city list

34

F1: to edit the location longitude and latitude

F2: to add the local city
2) The name and longitude of satellite showing in the upper part of the screen:
The name and longitude of current satellite marked in green. By press
/
you can switch to other satellite.
2.
Description of Menu Information
1) Level:
Show the strength of signal.
2) Quality:
Show the quality of signal.
3) Azimuth:
Show the required antenna azimuth to align current satellite in the current region.
4) Pol:
Show the required antenna polarization angle to align current satellite in the
current region.
5) Elevation:
Show the required antenna elevation angle to align current satellite in the current
region.
3.
Description of Menu Help
1)
/
: Press the
/
to switch the current satellite.
2) F1: Press to enter the Search menu, searching for current satellite programs.
3) F2: Press to enter the Satellite Edit menu
4) F4: Press to display local list
Press up/down key to move the highlight to choose the current location

35

IX. Emulation

Press right/left key to select the satellite and which one want to set
First, you can Move the screen up or down to set elevation, it like the LNB face to
the satellite
On the elevation menu, the left item display the emulation elevation parameter, if
the practical elevation set correct, the right item will display ok
The second, move the equipment left or right to set emulation azimuth parameter
if the practical azimuth set correct, the right item will display ok

1.
Description of Menu Item
1) Satellite:
Options of the satellite name and satellite longitude. Press the OK key to get a
drop-down list, move the cursor with the arrow keys and press the OK button to
select the desired satellite.
2) Sat Degree:
Display longitude of selected satellite, which can be edited.
3) Local Longitude:
Local longitude, which can be edited
4) Local Latitude:
Local latitude, which can be edited
36

5) Calculate:
Press to calculate the required antenna Azimuth, elevation and polarization, to
align current satellite and show the result at the bottom of the screen.
Move the equipment left or right to set azimuth
Move the screen up or down to set elevation
2.
Description of Menu Information
1) Azimuth:
Show the required antenna azimuth to align current satellite in the current region.
2) Elevation:
Show the required antenna elevation angle to align current satellite in the current
region.
3) Polarization:
Show the required antenna polarization angle to align current satellite in the
current region.
If the compass no workingplease make the equipment move to like 8
pattern

X.

System

1. System settings
When with highlight on the system setting item, press OK key and entry system
setting menu will display like:
1) City:
Options of city or area. Press the OK key to get a drop-down list, move the cursor
with the arrow keys and press the OK button to select the desired city.
2) OSD Language:
Press the OK key to get a drop-down list, move the cursor with the arrow keys and
press the OK button to select the desired language.
3) OSD Transparency:
Press the OK key to get a drop-down list, move the cursor with the arrow keys and
press the OK button to select the desired transparency.
There are 5 levels of transparency, 10%, 20%, 30%, and 40% and OFF (means
no transparency function).
4) OSD style
37

Press the ok key to get an OSD style list, move the cursor with the arrow key to
switch the OSD style
5) LNB Power:
LNB power supply options.
LNB Power: The receiver will supply power to satellite antenna in On mode.
2.
System information
Enter Information menu, it will show information about this equipment

3.
System password
Select system password menu and there will be pop-up message to input the
password. Default password is 0000
4.
CA
We provide CA slots for user. Receiver has been built in smart card module with
CONAX system. By using cards provided by operators in this system, it is
possible to watch many scrambled channels coded in this system. This menu
shows detailed information about card inserted into card reader module. It allows
inserted in order to help messages visible on the bottom of the screen.
Note:
All information showed in this menu and submenu is coming from inserted
card. If anything is wrong, it could be card problem. After inserting the card
correctly at any time, a message-box will show on the screen with message
about detecting the card, in "card info" menu all available information will
be displayed
5.
CI
We provide CI slot for user to use. Using different CAM & cards provided by
different CAS operator, user can view many type or scrambled channels.
We provide this menu to display the detail information of the CAM & cards
inserted in the slots. User can check all this information by the message at the
bottom of each menu.

38

When you insert the CAM correctly at any time, a message will be showed in the
screen to tell you which CAM has been detected by the receiver and it is available
now.
Note:
All information showed in this menu and submenu is coming from inserted
card. If anything is wrong, it could be card problem. After inserting the card
correctly at any time, a message-box will show on the screen with message
about detecting the card, in "card info" menu all available information will
be displayed
6.
PING
When you enter Internet PING menu, you will see a screen like below:

.Set Ping Mode option for 5times or forever

.Set Ping time out by 1~10sec
Set Ping Target by String and Number
When the highlight on the Ping Run, press OK key to run PING function
7.
Internet local setting
Press to enter internet local setting menu.
When you enter Network Local Setting menu, you can select DHCP or input the
IP address manually.

39

The default setting for network is DHCP and it will be able to automatically obtain
network settings.
If you select DHCP off, you can input IP Address, Subnet Mask, Gateway, DNS
Preferred, DNS Alternate and Mac Address. And select Apply to save the
changed figures.
8.
Internet Upgrade
Press to enter internet upgrade menu.

When you enter Upgrade By Network menu, you will see a screen like below:
1). Set Protocol options for HTTP and upgrading will be processed according to
HTTP protocol.
2). Set Protocol options for FTP and file will be able to be transferred according to
FTP protocol.
3). Set URL Type option for String and you can access to the URL by string
(alphabet)
4). Set URL Type options for Number and you can access to URL by IP numbers
5). Press OK button for upgrading
9.
Factory Default
Press to enter factory default menu.

When you press [OK] key in the Factory Default item, It will show a warning
message to inquiry you The operation will delete all of your data.
40

If you select Yes option, the all revised parameters of the receiver will reset to
default value. Please carefully to use this function.
10. Delete

When you enter to Delete menu, you can Delete all TV and Radio channels

XI. Specifications

tuner
DVB-S/S2

Connector

F type, male

Frequency
range

950MHz-2150MHz

LNB supply

13/18V,max500mA

LNB switch
control

22KHz

Power range 42dBV~82dBV

Impedance

75

Front end

QPSK/8PSK/16APSK

demodulator Symbol rate

Spectral
inversion

tuner
DVB-C

2Mbps~45Mbps
Auto conversion

Connector

BNC

Frequency
range

117MHz-858MHz

Bandwidth

5/6/7/8 Mhz,

Power range 42dBV~82dBV

demodulator Front end

16/32/64/128/256QAM
41

tuner
DVB-T/T2

Symbol rate

1000 to 7000 Kbauds

Carriers
Frequency
range
Bandwidth

2K/8K
170MHz-858MHz
5/6/7/8 Mhz,

Power range 42dBV~82dBV

demodulator

Video Decoder

MPEG Audio

Port

Power Supply

Battery

Impedance

75

Front end

QPSK/16QAM/64QAM/256QAM

Carriers

2K/8K
ISO/IEC 11172-2 MPEG1,ISO/IEC
MPEG 2
13818-2 MPEG2 MP@HL,
ISO/IEC 14496,MPEG4 Compliant
Data Rate
Support SP@l3 to ASP@L5,
ISO/IEC 14496-10 AVC high, Profile @
Resolution
level 4.1 Main profile @ level 4.1
Video format PAL/NTSC
Decoding

MPEG1 Layer1/2,MPEGII LayerII

Mode
Sampling
rates
Connector
Li-ioN
Battery
Supply
voltage
charger
Temperature
range:

Mono/Stereo/Left/Right

Consumption
Panel Connectors
Physical Specification

Monitor

32,44.1 and 48KHz

USB,RS232,Ethernet,AV-OUT, DC
4100 mAH
15V 1.5A
90-240V
-20 c - 60 c
Max. 22 W

Digital tuner
input
Size

F type, Male
255x143x55mm

Weight(Net)
Display
Screen
Signal
Strength
Display

1.35kg
7.0 Inch TFT
Yes

42

XII.

43