1067

SideControl Positioner,
electropneumatic positioner
for pneumatic actuators

Type 1067 can be combined with...

Integral process controller (PID characteristic)

Digital electronics
Optional position feedback
Attachment to linear or rotary actuators to
NAMUR (DIN IEC 534-6, VDI/VDE 3845)
Compact design
Choice of internal or external position sensor

Type 2702

Type 8805

Type 8323

Globe control valve

Angle seat valve

Rotary actuator

Pressure
transmitter

acc. to NAMUR/IEC

The SideControl Positioner Type 1067 serves to position pneumatically

actuated positioner valves. SideControl nds applications in many areas
by attachment to Burkert process valves or to linear and rotary actuators
to IEC 534 or VDI/VDE 3845, or coupled to a separate position sensor
or pneumatic positioning system. The compact design of the aluminium

Technical data
Materials
Body
Fluidic manifold
Operating temperature
Control medium
Dust content
Particle density
Pressure dew point
Oil concentration
Pressure range
Air ow capacity
small
large
Control air consumption
in equilibrium
Port connection
Flow:
QNn-value for air (l/min)
Operating voltage
Electrical power
consumption
Signal input
Setpoint for positioner
and process controller
Process value for PID
controller binary input

Aluminium painted
Aluminium anodized
0 to +60 C
Quality classes acc. to DIN ISO 8573-1
Class 4 (15 m)
Class 5 (10 mg/m3)
Class 4 (+3C )
Class 5 (25 mg/m3)
-1 to 6 bar
35 l/min
70 l/min
0 l/min
G 1/8
Measured at +20 C, 6 bar pressure at
valve inlet and 1 bar pressure difference
24 V DC
< 10 W

body and the availability of versions for low air ow capacities enable
attachment to positioning valves of small nominal diameter and size. The
integral PID process controller may be activated to set up decentralized
control loops.

Technical data
Position sensor system
Intern/Extern
Electrical connection
Type of protection
Option
Statement of pressure
(bar)
Positioner
Rotation
Ext. position sensor sys.
Stroke
PID controller
Proportional action factor
(amplication)
Reset time
Rate time
Working point of controller

Rotary potentiometer with coupling shaft

Screw terminals 1.5 mm2
2 PG9 bushings
IP 65
Position feedback binary/analog
(4-20mA)
Excess pressure to atmospheric
Positioning range
0 to 180
0 to 25 mm
0 to 50 mm
Parameter range
0.0 to 999.9
0.5 to 999.9
0.0 to 999.9
0 to 100%

0 (4) to 20 mA oder
0 to 10 V
4 to 20 mA
make or break contact

back

next

Process Valves, 5 Caulside Drive, Antrim, Northern Ireland, BT41 2DU

www.process-valves.com, [email protected], Tel +44 (0) 28 9448 1809

1067
Functional diagram
Process setpoint
(external or internal)

External
position setpoint

Position sensor system

Actual position

Setpoint position

Process
controller

Positioner

Input air

Positioning
valve

Solenoid valves

Exhaust air

Sensor

Process value (e.g. pressure, ow rate, level, temperature)

Supplementary functions
Selection of a transfer characteristic (linear, equiprocentile or freely programmable) for correction of the ow or
operating characteristic of the valve
Determination of a dead band for the setpoint
Tight closure function to assure tight closure of the valve
Determination of safety position to be assumed under certain circumstances
Determination of the direction of action of the setpoint or actual value
Splitting of the entire setpoint range over several positioners
Stroke limitation
Limitation of positioning speed
PID controller

Process Valves, 5 Caulside Drive, Antrim, Northern Ireland, BT41 2DU

www.process-valves.com, [email protected], Tel +44 (0) 28 9448 1809

1067

Control function A
(spring closing),
single acting

external

Brkert piston actuators

(Type 2700, 2712)
Globe control valves

Control function A
(spring closing),
single acting

external

Linear diaphragm actuators

with mechanical interface
acc. to DIN IEC 534-6

single acting

internal

double acting

internal

single acting

internal

double acting

internal

single acting

internal

double acting

internal

Linear diaphragm actuators

with mechanical interface and
Analog position feedback board

80
100
125
175 and 225
80
100
125
175 and 225
small, 14 l/min
large, 35 l/min
double, 70 l/min
small, 14 l/min
large, 35 l/min
small, 14 l/min
large, 35 l/min
double, 70 l/m
small, 14 l/min
large, 35 l/min
large, 35 l/min
double, 70 l/m
large, 35 l/min

449105
449105
550690
550690
449105
449105
550690
550690
447787
416947
420093
444210
416948
447787
416947
420093
444210
416948
428629
428630
428532

651713
653020
653020
655534
651713
653020
653020
655534

Item no. for

associated
attachment
parts

Item no.
for external
position
sensor
system

Item no. for

positioner

Actuator
size [mm]
Actuator
version

Position
sensor
system

Brkert piston actuators

(Type 2730, 2731)
Control diaphragm valves

Rotary actuators
with bracket and mech.
interface VDI/VDE 3845

Circuit
function

Actuator type

Ordering table for positioner for attachment to a pneumatic actuator

(other versions on request)

642769
642769
642768
550622
642769
642768
642768
550622
420153
420153
420153
420153
420153
420152
420152
420152
420152
420152
420153
420153
420153

The bracket (also known as bridge) usually belongs to the scope of delivery of the actuator manufacturer or should be obtained from there.

The air ow capacity of the positioner must be selected according to the actuator volume and version. This choice affects the dynamics and control
performance of the entire control valve system.

Ordering chart for accessories

Version

Item no.

Console VA VDI/VDE3845-ISO5211 FO5 for mounting the pneumatic actuator of ball valve Type 8805

672243

Ordering note
On attachment to a Burkert positioning valve, the positioner SideControl 1067 is supplied only as a part of a complete control valve
(positioner, position sensor system, associated attachment parts and positioning valve).
For selection of a suitable positioning valve, please use the data sheets for the types 27XX.
For ordering a complete control valve please write your specications on the form supplied at the back of the separate datasheet.
For ordering a complete control valve, please state

the item no. of the positioner SideControl Type 1067,

the item no. of the position sensor system,
the item no. of the selected control valve and
the item no. of the associated attachment parts with the remark SideControl Type 1067 - control valve.

Burkert supplies a completely assembled and tested control valve.

Process Valves, 5 Caulside Drive, Antrim, Northern Ireland, BT41 2DU

www.process-valves.com, [email protected], Tel +44 (0) 28 9448 1809

642292

1067
Dimensions

Lever

Body dimensions
WxHxD=
125 x 80 x 80 mm3

M6

80

60.0d

36.0
50.0

G 1/8
32.5

125

NAMUR connection plate (rear side) of the positioner with internal position sensor system. The lever serves (with diaphragm
actuators only) to convert the stroke into a rotation (0 to 60). With rotary actuators, the rotation (0 to 90) is taken from the
actuator shaft by means of an adapter.

Process Valves, 5 Caulside Drive, Antrim, Northern Ireland, BT41 2DU

www.process-valves.com, [email protected], Tel +44 (0) 28 9448 1809