Scribd
Upload
75 views

CS Power Meter CS 110: Technical Data

The CS Power Meter CS 110 is designed to measure the power consumption, current, voltage, and other parameters of a 3-phase load. It can be installed using hat rail, wall, or portable mounting and communicates measurements via Modbus/RTU. The device measures actual power in kW and accumulated energy in kWh using three current clamp sensors to monitor loads up to 690 kW. It has inputs for voltages up to 480V AC and current clamp ranges from 200A to 1000A.

Uploaded by

Yanuar Zulkarnain
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
75 views

CS Power Meter CS 110: Technical Data

The CS Power Meter CS 110 is designed to measure the power consumption, current, voltage, and other parameters of a 3-phase load. It can be installed using hat rail, wall, or portable mounting and communicates measurements via Modbus/RTU. The device measures actual power in kW and accumulated energy in kWh using three current clamp sensors to monitor loads up to 690 kW. It has inputs for voltages up to 480V AC and current clamp ranges from 200A to 1000A.

Uploaded by

Yanuar Zulkarnain
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

CS Power Meter CS 110

CS 110-W in wall mountable casing

CS 110 (top) hat rail mountable

The CS Power Meters are designed for easy installation and


high accuracy. It measures the actual power consumption
in kW and accumulates the Energy consumption in kWh of
a 3-phase load. Additionally other measured parameters such
as current, voltage, cos phi etc are available as well. Through
3 clamp sensors the current is sensed. Hat rail, wall mountable
and portable versions are available.

n
I
S

u
r
t
s

e
m

nt

C
)
ia

Technical Data

Nominal voltage (L-N, L-L)

s
A

,
.
o

.
d
Lt

277 / 480 V AC

Clamp sensor input range

0 ... 1 A

Available clamp sensors

200 A, 500 A, 1000 A

Power range

Up to 690 kW
(depending on clamp sensor)

Accuracy

Voltage: 0.2%
Current: 0.5%
Clamp: class 1
Energy: class 0.5
Modbus/RTU

(
s

Output
Supply
Operating Temperature
Dimensions

24 V DC / 4 W
-5...+55C
hat rail version: 110x90x31mm
wall version: 190x155x85mm
Portable:
177x177x60mm

CS 110-P, for connection


to DS 350-P

Current clamp sensor (right), easy snap on to


isolated conductors
DS 350 / 330 can be used as stationary
display of up to 16 power meters

-48-

CS Power Meter CS 110


Installation
Power supply compressor

Back

9
8
5

Ia+

7
6

Ia-

+5 V
0V
+ 24 V

Enter

DS 350

s
A

DS 350

(
s

.
d
Lt

Current
clamp

NC

IbIb+

NC

Ic+

16

GND

Power Meter

15

Data-

AC Current Clamps: 1 A

14

Data+

Supply

13

Va

Ic-

AC Voltage: 380 V

12

Vb

RS-485

11

Vc

Part number: 0554 0006


Power supply: 21...27 VDC
S/N:

10

17

N
L3
L2
L1

18

Voltage
connection

C
)
ia
L1

,
.
o
L2

Connection to DS 350

Compressor

L3

In above illustration a power meter is installed directly into the connection box of the compressor. The current clamps can be easily
fixed with fasteners around the supply wires. The voltage connection can be drawn from other available connection points. A separate
cable connects the CS power meter to the DS 3530/350 with Modbus/RTU and 24 VDC power supply. The power meter could also be
installed into the connection cabinet where the power supply for the compressor is coming from. If no hat rail mounting is available,
there is a wall mountable version of the CS power meter.

m
u

Order no.

t
n
e

r
t
s

Description

n
I
S

0554 0030
0554 0033

Power meter CS 110, hat rail, Modbus/RTU


Power meter CS 110-W, Modbus/RTU, 24 VDC supply, wall mountable

0554 0034

Portable power meter CS 110-P, Modbus/RTU, including 4 test leads, 4 test clips, connection cable to DS 350-P

0554 0040

Current clamp sensor, 1.8m cable, 200/1A

0554 0041

Current clamp sensor, 1.8m cable, 500/1A

0554 0042

Current clamp sensor, 1.8m cable, 1000/1A

0554 0061

Current clamp sensor, 1.8m cable, 200/1A, connector to CS 110-P

0554 0062

Current clamp sensor, 1.8 m cable, 500/1 A, connector to CS 110-P

0554 0063
0554 0035
0553 0121

Current clamp sensor, 1.8 m cable, 1000/1 A, connector to CS 110-P


Transport case DS 350-P for sensors and cables

Sensor cable, 6 pole, AWG22, 7.5mm outer diameter, w/shielding, black (per meter)

-49-

You might also like