Tool and Supplies List: Portland Community College Aviation Maintenance Technology
Tool and Supplies List: Portland Community College Aviation Maintenance Technology
SCREWDRIVERS
MAGNA TIP or equivalent - approx. 8" long with four replaceable 1/4" hex
Apex style tips. Ratcheting recommended. Tips should be the following:
_____#1 Phillips,
_____#2 Phillips (plus 4 extras),
_____small straight slot,
_____medium straight slot
DZUS (special fastener) Quarter turn tool
SCREWDRIVER SET - 9 Piece minimum (must include straight slot and
Phillips. Blade lengths should range from 3" to 12")
STRAIGHT SLOT STUBBY- approx. 1" long blade, 1/4" blade width (may
be included in above set)
PHILLIPS STUBBY- approx. 1" blade length with #2 tip (can be included in
above set)
METAL WORKING TOOLS
Hammer blow CENTER PUNCH Required
Automatic CENTER PUNCH - Optional
SCRIBE (one 90 degree end & one straight end)
HACK SAW FRAME, 12"
______Blade, 18 tpi
______Blade, 24 tpi
______Blade, 32 tpi
FILE, flat, smooth, single cut, 8"
FILE, flat, medium, double cut, 8"
FILE, Round, smooth, 8"
FILE HANDLES, Wood or plastic (One for each file)
FILE CARD and BRUSH
PIN PUNCH, sized in inches - 1/16, 3/32, 1/8, 5/32, 3/16, 1/4, 5/16.
SAFETY EQUIPMENT
MECHANICS GLOVES
WELDING GLOVES, all leather, gauntlet-type *
RESPIRATOR, Half-face, Organic Vapor/Dust, activated charcoal type,
similar to 3M-4251, with storage bag.
DUST MASK, disposable*
HEARING PROTECTION, Ear-muff style and Ear Plugs *
EYE PROTECTION must meet ANSI Z87.
Clear lens, non-tinted. Over glasses style for prescription lens/frames or
prescription lens/frames meeting ANSI Z87.*
OTHER TOOLS
BALL PEEN HAMMER - 12 oz.
DEAD BLOW HAMMER - 10 to 16 oz., soft faced, (no exposed metal)
MAGNETIC PICK UP TOOL, Telescoping
MECHANICAL FINGERS (flexible pick-up tool with spring jaws)
HEX KEY WRENCH SET (Allen wrench) fractional, .050" to 3/16" range
WIRE STRIPPERS, 10 22 AWG range, (heavy duty, automatic preferred)
TERMINAL CRIMPING TOOL, 10 22 AWG, (ratcheting style preferred)*
TIRE VALVE CORE TOOL, Low profile
TOOL BOX
TOOL BOX , (Students are allowed only one box, Top or Roller.)
- Top box
MAXIMUM dimensions
-Width - 26
-Height - 20
-Depth - 16
- Bottom or Roller box ONLY by space permitting
MAXIMUM dimensions
-Width - 26
- Height - 37
CABLE or CHAIN with LOCK (used to secure boxes, top or roller style, in
designated toolbox storage areas.)
SUPPLIES
1/4" GRAPH PAPER*
COLORED HIGHLIGHTING MARKERS*
COLORED PENCILS or CRAYONS*
#2 PENCILS*
"ULTRA FINE POINT" PERMANENT MARKER, Sharpie style (used to
mark sheet metal) *
CLIP BOARD*
PENCIL COMPASS*
PLASTIC PROTRACTOR*
CALCULATOR, must be non-programmable (scientific, with inverting
capability) for use during tests*
* Indicates tools or supplies that are available in the Rock Creek Bookstore.