Scribd
Upload
263 views

Kubler 5810 Incremental Encoders

This document provides information on the Rotary Measuring Technology Economy Type 5810 incremental encoder. It has an IP64 rated 58mm housing, operates at speeds up to 6000 rpm, and has push-pull outputs with a supply voltage of 10-30V DC. It provides incremental encoder signals with a maximum frequency of 20kHz and short-circuit proof outputs.

Uploaded by

Tito David Paredes
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
263 views

Kubler 5810 Incremental Encoders

This document provides information on the Rotary Measuring Technology Economy Type 5810 incremental encoder. It has an IP64 rated 58mm housing, operates at speeds up to 6000 rpm, and has push-pull outputs with a supply voltage of 10-30V DC. It provides incremental encoder signals with a maximum frequency of 20kHz and short-circuit proof outputs.

Uploaded by

Tito David Paredes
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Rotary Measuring Technology

Incremental encoders
Economy Type 5810 (shaft)

Incremental Encoders

58 mm housing
Short-circuit proof outputs
Customized versions also available
High mechanical protection
Push-pull output
(10 ... 30 V supply voltage)

RoHS

2/22

Mechanical characteristics:
Speed:
Rotor moment of inertia:
Starting torque:
Radial load capacity of shaft:
Axial load capacity of shaft:
Weight:
Protection acc. to EN 60 529:
EX approval for hazardous areas:
Working temperature:
Shaft:
Shock resistance acc. to DIN-IEC 68-2-27
Vibration resistance acc. to DIN-IEC 68-2-6:

max. 6000 min-1


approx. 0.6 x 10-6 kgm2
< 0.01 Nm
40 N
20 N
approx. 0.4 kg
IP 64
Housing (IP 67 with cable, IP 50 with connector)
optional zone 2 and 22
0 C ... +65 C
stainless steel
1000 m/s2, 6 ms
100 m/s2, 10...2000 Hz

Electrical characteristics:
Output circuit:
Push-pull
Supply voltage:
10 ... 30 V DC
Power consumption (no load)
without inverted signal:
max. 80 mA
Permissible load/channel:
max. 30 mA
Pulse frequency:
max. 20 kHz
Signal level high:
min. UB 2.5 V
Signal level low:
max. 1.5V
Rise time tr
max. 1 s
Fall time tf
max. 1 s
Short circuit proof outputs:1)
yes
Reverse connection protection at UB:
yes
Conforms to CE requirements acc. to EN 61000-6-1, EN 61000-6-4 and EN 61000-6-3
RoHS compliant acc. to EU guideline 2002/95/EG
1) If supply voltage correctly applied

Terminal assignment
Signal:
5 pin plug, Pin:
Colour

0V
1
WH

+UB
2
BN

A
3
GN

B
4
YE

0 or. 0
5
GY

Shield
PH1)

Top view of mating side, male contact


base:
5-pin plug

1) PH = Shield is attached to connector housing


Isolate unused outputs before initial startup.

Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]

Rotary Measuring Technology


Incremental encoders
Economy Type 5810 (shaft)
Dimensions
Clamping flange 58

48 [1.89]
20
[

0.7
9

36 [1.42]

58 [2.28]

12
0

X
13 [0.51]
10 [0.39]

30

37,2 [1.46]

Synchronous flange 58

42 [1.65]

50 [1.97]

58 [2.28]

12
0

47,2 [1.86]

ma
x.2
6[1
.

02
]

4 [0.16]
3 [0.12]
3 [0.12]

12 [0.47]

Mounting advice:
The flanges and shafts of the encoder and drive
should not both be rigidly coupled together at the
same time! We recommend the use of suitable
couplings (see Accessories section).

1 3xM3, 6 [0,24] deep


2 3xM4, 6 [0,24] deep

Order code:

30

8.5810.XXXX.XXXX
Pulse rate
10, 50, 100, 200, 360, 500, 512

Type

(e.g.. 250 pulses => 0250)


Other pulse rates on request

Flange
1=
2=

Clamping flange 58
Synchronous flange 58

Type of connection
2 = Cable radial (1 m PVC-Cable)
5 = radial 5 pin plug without
mating connector

Shaft
1 = 6 mm x 10 mm
2 = 10 mm x 20 mm
Output circuit
3 = Push-pull, Channel A and B

are
types
d
e
r
r
e
Pref d in bold
te
indica

Accessories:
Corresponding mating connector of connection type 5: Order-No. 8.0000.5022.0000
Cables and connectors, also pre-assembled, can be found in the chapter Connection
Technology
Mounting attachments and couplings can
be found in the chapter Accessories

Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]

You might also like