Scribd
Upload
265 views

Modular Frls Parker

The document describes Mini Series pneumatic filters, regulators, lubricators (FRL) units. It discusses several modular Mini FRL systems with ports ranging from G1/8 to G3/4. The individual units are made of lightweight, durable polymer and can be connected together without pipes. Popular combinations of Mini FRL units are listed along with their part numbers and specifications. Flow rates, pressure ranges, and dimensions are provided for the different Mini FRL components.

Uploaded by

bmsengineering
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
265 views

Modular Frls Parker

The document describes Mini Series pneumatic filters, regulators, lubricators (FRL) units. It discusses several modular Mini FRL systems with ports ranging from G1/8 to G3/4. The individual units are made of lightweight, durable polymer and can be connected together without pipes. Popular combinations of Mini FRL units are listed along with their part numbers and specifications. Flow rates, pressure ranges, and dimensions are provided for the different Mini FRL components.

Uploaded by

bmsengineering
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 84

Modular FRLs

Pneumatic

Mini Series G1/8 - G1/4


Modular Junior Series G1/8 to G3/8
Modular Maxi Series G1/4 to G3/4
Modular Series G1

Catalogue no. 2158GB-ca

Mini FRLs
Mini FRLs
The Mini FRL range is designed for use in
small pneumatic systems or in control cabinets where
space is at a premium.
The system allows units to be connected together,
without the use of pipe connectors, saving space;
providing constant mounting centres; whilst
maintaining a modern aesthetically pleasing
appearance.

The individual filters, regulators, lubricators and


filter/regulators are all moulded in a quality engineering
polymer, and carry integral port threads G1/8 or G1/4 using
a metal insert, to give added strength when units are used
individually.
Overall the individual products are extremely light in
weight, a complete FRL unit weighs only 380 grams.

The Mini FRL system

Coloured knobs

Pneumatic

8 bar

Black

4 bar

Grey

2 bar

Blue

Mini FRLs
Popular combinations

P3A-CB11BGB

Mini FRL Combinations


5 micron elements, 8 bar regulator + gauge and wall mounting brackets
Ports

Bowl - Drain

G 1/ 8

Transparent Bowl
Manual Drain
P3A-CB11BGB

Transparent Bowl
Semi -Auto Drain
P3A-CB11CGB

G /4

P3A-CB12BGB

P3A-CB12CGB

Flow @ 6 bar
l/min
dm3/sec
420

480

P3A-CA11BGB

Filter/Regulator - Lubricator Combinations


5 micron elements, 8 bar regulator + gauge and wall mounting brackets
Ports

Bowl - Drain

G 1/ 8

Transparent Bowl
Manual Drain
P3A-CA11BGB

Transparent Bowl
Semi -Auto Drain
P3A-CA11CGB

G 1/ 4

P3A-CA12BGB

P3A-CA12CGB

Flow @ 6 bar
l/min
dm3/sec
420

480

Part numbers.
P3A-

Filter/Reg +
Lub combo

G 1/ 8

11

Transparent Bowl
Manual Drain

No
Gauge

FR L combo

G1 / 4

12

Gauge

FRL combo
+ Manifold
after Regulator

Transparent Bowl
Semi-Auto Drain

F/R L combo
+ Manifold after
Filter/Regulator

Pneumatic

Note: For materials see page 16


For dimensions see page 17

Mini FRLs
Popular combinations
Filter/Regulator and manual bistable dump valve
combinations with wall mounting brackets
5 micron element, 8 bar regulator spring
Dump valve with black knob and locking clip

P3A-CN12BGB

Filter regulator manual bistable dump valve


Ports

Locking dump valve


Transparent Bowl
Transparent Bowl
Manual Drain
Semi -Auto Drain
P3A-GN12BGB
P3A-GN12CGB

G 1/ 4

Flow @ 6 bar
l/min
dm3/sec
650

Part numbers.
P3A-

G 1/ 4

12

Note: For customised combinations consult


Technical Sales Department.

Pneumatic

Transparent
bowl manual
drain
Transparent
bowl semiauto drain

No Gauge

Gauge

Note: For materials see page 16


For dimensions see page 17

11

Mini FRLs
Popular combinations
Dump valve and soft start valve combinations
with wall mounting brackets and muffler

P3A-CS12QMB

Valves for other than 24 V DC to be ordered


less solenoid & solenoid ordered separately.
Muffler included with
each product.

Dump valve and soft start valve


Port

Solenoid operated dump valve + manual set point soft start valve

G /4
1

Flow @6 bar

24V DC

Less Solenoid

l/min

dm3/s

P3A-CS12GMB2CC

P3A-CS12GMB

1100

18.3

For solenoids see page 16

Dump valve and soft start valve


Port

Pilot operated dump valve + manual set point soft start valve

G /4
1

Flow @6 bar

P3A-CS12QMB

l/min

dm3/s

1100

18.3

Part numbers.
P3A-

G 1/ 4

12

15mm solenoids
8mm PIN centres G
on opposite side
Pilot port push-in

Note: For customised combinations consult


Technical Sales Department.

Note: For materials see page 16


For dimensions see page 17
For solenoids see page 16

Pneumatic

24V DC

2CC

Without
Solenoid

000

Mini FRLs
Filters

Symbols
1

Manual drain

Semi auto drain

High quality polyamide bowls standard.


Unique 'elastomatic' filter elements 5 micron standard,
40 micron optional.
Manual, Semi-auto drain or Pulse options.

Part numbers:

P3A - FA
G 1/ 8

11

Transparent Bowl
Manual Drain

G 1/ 4

12

Transparent Bowl
Semi-Auto Drain

Technical information

5 Micron - std

40 Micron

Dimensions (mm)

Max. inlet pressure

10 bar max.

Temperature range

-100C +500C

Bowl capacity

11 cm3

High capacity bowl

33 cm3

Flow*
G1/8

870 l/min - 14.5 dm3/s

G /4

1050 l/min - 17.5 dm3/s

Weight

75g

Note: For materials see page 16


Flow characteristics
1 1.6 2.5

0.7

6.3 7 8

* At 6 bar inlet,
0,7 bar
pressure drop.

0.6

Pressure drop bar

bar

0.5

* Modular connection kit


with each product

0.4
0.3
0.2
0.1
0
0

10

12

Flow dm3/s

Pneumatic

14

16

18

20

For Repair Kits and Spares


see pages 62 and 63.

Mini FRLs
Coalescing Filters and Adsorbers

Symbols
1

Manual drain

Semi auto drain

Part numbers:

P3A - FA
G1/8

11

Transparent Bowl
Manual Drain

G1/4

12

Transparent Bowl
Semi-Auto Drain

Technical information
Max. inlet pressure
Temperature range
Bowl capacity
High capacity bowl
Max flow*
Max flow*
Weight

Coalescing

Adsorber

Features: Coalescing filters

10 bar max.
-100C +500C
11 cm3
33 cm3
150 l/min - 2.5 dm3/s (Adsorber)
150 l/min - 2.5dm3/s (Coalescer)
75g

Note: For materials see page 16

Maximum solid particle passed 0.3 microns.


Maximum oil carry-over 0.02 mg/m3
High quality polyamide bowls standard,
metal bowl option.
Manual, Semi auto drain or Pulse options.

Features: Adsorbers

Flow characteristics
1 1.6 2.5 4

6.3 7 8

bar

Removes hydro-carbon vapours.


Removes oil vapour carry-over.

Pressure drop bar

Activated carbon element


For "breathable air" applications.

* Modular connection kit


with each product
Flow dm3/s

Coalescing filters
* Maximum recommended flow at 7 bar inlet pressure and
140 mbar pressure drop with element wet.
Adsorbers
* Maximum recommended flow at 7 bar inlet pressure
and 100 mbar pressure drop.
The use of a Coalescing pre-filter is essential.
Adsorber filters do not remove carbon monoxide
or carbon dioxide.

Pneumatic

For Repair Kits and Spares


see page 62 and 63.

Mini FRLs
Regulators

Symbols
3

2
Self bleed regulator
with gauge

Non bleed regulator

3 secondary pressure ranges available, 0.2 - 2 bar


0.2 - 4 bar, 0.2 - 8 bar.
Balanced diaphragm design, self relieving
standard, non relieving optional.
Push to lock non-rising control knob.
Colour coded adjustment knobs.
8 bar Black, 4 bar Grey, 2 bar Blue.

Tamperproof facility.

Part numbers:

P3A - RA

P
G 1/ 8

11

G 1/ 4

12

Relieving
Non -relieving

B
N

0,2 - 8 bar + Gauge


0,2 - 8 bar No Gauge
0,2 - 2 bar + Gauge
0,2 - 2 bar No Gauge
0,2 - 4 bar + Gauge
0,2 - 4 bar No Gauge

Technical information

G
N
Z
Y
M
L

Dimensions (mm)

Max. inlet pressure

10 bar max.

Temperature range

-100C +500C
G1/8 each side

Flow
4 - 8 bar

760 l/min - 12,7 dm3/s

2 bar

390 l/min - 6,5 dm3/s

Weight

85g

Note: For materials see page 16.


For pressure gauges see page 61.
55 approx

For Repair Kits and Spares see pages 62 and 63.


Flow characteristics

Regulation characteristics

8
7

Flow 1 dm3/s

Secondary pressure bar

Secondary pressure bar

4
3
2
1
0
0

10

12

14

16

18

Flow 5 dm3/s

4
3
2
1

20

Flow dm3/s
P3A-RA12BNN G1/4 ports, 8 bar spring
P3A-RA11BNN G1/8 ports, 8 bar spring

Pneumatic

Primary pressure bar

10

Mini FRLs
Filter regulator

Symbol
1

'Elastomatic' filter elements 5 micron


standard, 40 micron optional.
3 secondary pressure ranges, 0-2 bar, 0-4 bar
or 0-8 bar.
Push to lock, non-rising control knob.
Colour coded adjustment knobs.
8 bar Black, 4 bar Grey, 2 bar Blue.
Tamperproof facility.

Part numbers:

P3A - EA

G 1/ 8

11

Transparent Bowl
Manual Drain

G1 / 4

12

Transparent Bowl
Semi-Auto Drain

5 Micron-std

Relieving

40 Micron

NonRelieving

Technical information

0,2 - 8 bar + Gauge

0,2 - 8 bar No Gauge

0,2 - 2 bar + Gauge

0,2 - 2 bar No Gauge

0,2 - 4 bar + Gauge

0,2 - 4 bar No Gauge

Dimensions (mm)

Max. inlet pressure

10 bar max.

Temperature range

-100C +500C

Bowl capacity

11 cm3

High capacity bowl

33 cm3

Weight

132g

G1/8 each side

102

Note: For materials see page 16.


For pressure gauges see page 61.

Flow characteristics

Secondary pressure bar

Inlet 7 bar

* Modular connection kit


with each product

Flow (dm3/s)

Pneumatic

For Repair Kits and Spares


see page 62 and 63.

Mini FRLs
Lubricators

Symbols
1

Lubricator

Lubricator
with drain

High quality polyamide bowls standard.


3600 sight dome - drip control.
Low flow oil pick-up capability.

Part numbers:

P3A - LA

N
G 1/ 8

11

G1 /4

12

Transparent Bowl
with Manual Drain
Transparent Bowl
Without Drain
High Capacity
Transparent Bowl
Manual Drain
High Capacity
Transparent Bowl
No Drain

Technical information
10 bar max.

Temperature range

-100C +500C

Bowl capacity

26 cm3

High capacity bowl

48 cm3

Pre lubricants

G1/ 8

780 l/min - 13 dm3/s

G /4

1080 l/min - 18 dm3/s

B
A
6
7

Dimensions (mm)

Max. inlet pressure

Flow*

For preferred lubricants see page 63.


* At 7 bar inlet 5% pressure drop
Note: For materials see page 16.
Flow characteristics
8

Supply pressure bar

Minimum operating flow


both sizes

* Modular connection kit


with each product

5
G1/8
4
G1/4
3
2
Minimum recommended
flows
(Pressure drop 5% of supply
pressure)

3 4 5 6 78 91

Flow dm3/s

Pneumatic

4 5 6 7 8 910

15 20

For Repair Kits and Spares


see page 62 and 63.

Mini FRLs
Soft Start and Dump Valves
The controlled introduction of pressure can be an
important safety factor and prevent damage to tooling etc.
when air pressure is introduced at machine start up.
The soft start valve is an ideal method of providing a fully
adjustable controlled introduction of pressure.

Soft Start Valve Operation:


The switch point is set via the control knob and is fully
adjustable between 1 and 5 bar. Additionally the bleed
orifice which delays the rise in pressure is supplied as
standard in several diameters:1mm, 1,5mm, 2,2mm, and 3mm.
These are field interchangeable by removing the top plug
of the valve.

The soft start valve will, when set, allow the pressure to gradually
build to the set point before fully opening to deliver full flow at
line pressure.
In normal operation the soft start valve is assembled, in
series, with an accompanying air pilot, solenoid pilot or
manually actuated dump valve. This is used as an on - off
switch for line pressure, and for exhausting the system.

Typical combinations
Soft start and
dump valve

Fig. 1.

FRL

Air supply to
m/c or system

Air supply

Fig. 2.

FRL
Air supply

Air supply to
m/c or system

Soft start and


dump valve
Soft start and
dump valve

Air supply to
m/c or system

Fig.1. enables part of a system to be isolated and the air


dumped to atmosphere whilst operating another part
normally.

Fig. 2. shows the Soft Start and Dump valve assembled as part
of the main Mini FRL combination feeding an entire system.

Effect of orifice on flow characteristics


of pneumatic switch

Flow characteristics for ('Soft Start' valve)

15 seconds
to exhausts
7
7

A BC D E
F

5
Pressure drop bar

Inlet pressure 10 bar

3
2

4
3
2.5
2

Time
secs.

6.3

1.6
1

20

40

6 bar inlet
10 litre volume
1.5mm dia orifice

60

80

100

A zero switch point


B 1 turn
C 2 turns
D 3 turns
E 4 turns
F 5 turns

Pneumatic

10

20

30

40

Flow (dm3/s)

50

60

70

Mini FRLs
Symbol

Soft Start Valves

Manually operated
Controlled induction of pressure
Fully adjustable switch point

Part numbers:

P3A - SA
G 1/ 8

11

G1 /4

12

Manual adjustment

Manual + Gauge

Technical information
Max. inlet pressure

10 bar max.

Temperature range

-100C +500C

Flow @ 6 bar

1000 l/min - 16,7 dm3/s

Weight

85g

30

Note: For materials see page 16.


For pressure gauges see page 61.

* Modular connection kit


with each product

Pneumatic

Mini FRLs
Symbol

Remotely Operated Dump Valves

Air pilot or solenoid pilot operated dump valves


Low Watt solenoid coils
Valves for other than 24 V DC to be purchased less
solenoid & solenoid ordered separately.

Part numbers:
N

P3A - DA
G 1/ 4

12

Pilot Monostable
4mm Push-in

PQ

Solenoid (15mm)
Monostable

SG

No Solenoid
24V. D.C.

2CN

Less Solenoid
For alternative solenoids
see page 16.

Technical information
Max. inlet pressure

10 bar max.

Temperature range

-100C +500C

Flow @ 6 bar
Through valve

to exhaust
3

1300 l/min - 22 dm /s
Weight

1000 l/min - 17 dm3/s


85g

4mm Push-in
Air pilot connection

Note: For materials see page 16.

Operation
Remotely operated dump valves automatically shut off
upstream pressure and exhaust the downstream
pressure when the pilot pressure is released.
To maintain these units in the open position a pilot supply
to the air pilot operated version or an electrical signal to
the solenoid operated version mist be maintained.
The valve will automatically dump when the holding
signal is removed.
Flow characteristics:
Inlet to Secondary

30

* Modular connection kit


with each product

Flow (dm3/s)

Pneumatic

Mini FRLs
Manually Operated Dump Valves

Symbol

BISTABLE version
The dumping of downstream pressure is manually actuated
by depressing the knob.
To reset, both effective upstream pressure and a manual lift
of the knob is required.

MONOSTABLE version . 2 exhaust dump functions

Shuts off upstream and dumps downstream pressure.


Choice of red or black knobs.
G1/4 ports.
Ventral G1/4 exhaust port.
Padlockable version.

Manually, by maintaining the button thrust down during time


required to dump the downstream pressure.
Automatically, when the upstream pressure falls below the
set pressure threshold.
To reset, effective upstream pressure and a manual lift of the
knob is required.
MONOSTABLE dump valves are an important element in
machine safety considerations. After a unexpected upstream
pressure failure, e.g compressor break down), system
pressure reset will be only be obtained by lifting the knob
combined with having an effective upstream pressure.

Part numbers:
P3A - DA

G 1/ 4

12

Manual Monostable black knob

Non Locking

Manual monostable red knob

Locking*

Manual Bistable black knob

* Up to 3 padlocks

Manual Bistable red knob

Technical information
Max. inlet pressure

10 bar max.

Temperature range

-100C +500C

Flow @ 6 bar
Through valve

to exhaust

G /4 1800 l/min - 30 dm /s

1920 l/min - 32 dm3/s

Weight

75g
G1/4
Each side

Note: For materials see page 16.

1/8 Gauge port

Locking clip
Order code
P3A-KA00ASN

G1/4 Exhaust port

Flow characteristics:
Inlet to Secondary

Flow characteristics:
Secondary to exhaust

* Modular connection kit


with each product

Flow (dm3/s)

Pneumatic

Flow (dm3/s)

Mini FRLs
Materials
Solenoids for Dump Valves (15mm solenoid)

Filter
Body
Bowl (Transparent)
Louvre
Standard Element
Coalescing Element
Adsorber Element
Manual Drain
Semi-Auto Drain
Springs
Seals

Nylon 6 glass filled


Nylon
Acetal
Nylon 6
Borosilicate and felt glass fibre
Activated charcoal
Acetal
Acetal / Brass
Stainless Steel
Nitrile

Supplied with cable plug and non-locking flush


manual override
Voltage

Order code

12VDC
24VDC
12V 50Hz/60Hz
24V 50Hz
115V 50Hz/120VAC 60Hz
230V 50Hz/240VAC 60Hz

P2E-KV32BN
P2E-KV32CN
P2E-KV34BN
P2E-KV31CN
P2E-KV31FN
P2E-KV31JN

Cable plugs 15 mm (8 mm pin spacing) IP 65

Regulator

Description

Body
Bonnet
Control Knob
Adjustable Screw
Spring Rest (Upper)
Spring Rest (Lower)
Spring
Diaphragm
Valve Stem
Valve Guide
Valve Seat
Bottom Cap
Springs
Seals

Nylon 6 glass filled


Acetal
Acetal
Plated Steel
Brass
Steel / Brass
Plated Steel
Nitrile / Nylon
Brass
Acetal
Nitrile
Acetal
Stainless Steel
Nitrile

Lubricator

Order code

Large headed screw for


inaccessible or recess position
Standard to be wired universal
P8C-C
To be wired LED+protection 24 VDC P8C-C26C
With standard screw
Standard to be wired universal
P8C-D
To be wired LED+protection 24 VDC P8C-D26C
With cable and standard screw
Standard with 2 m cable
Standard with 5 m cable
LED+protection 24 VAC/DC, 2 m
LED+protection 24 VAC/DC, 5 m

P8L-C2
P8L-C5
P8L-C226C
P8L-C526C

Solenoids for Dump Valves (CNOMO solenoid)

Body
Bowl (Transparent)
Knob
Sight Glass
Venturi Valve
Transfer Tube
Tube Retainer
Spring
Seals

Nylon 6 glass filled


Nylon
Acetal
Polyamide
Acetal
Nylon
Brass
Stainless Steel
Nitrile

Supplied with cable plug and


non-locking override
Voltage
CNOMO-Solenoids

Order code

24VDC (48V 50Hz)


24V/50Hz/60Hz (11VDC)
110V/50Hz/60Hz (50VDC)
230V/50Hz/60Hz (120VDC)
12V/50Hz/60Hz (6VDC)

P2G-PV32C1
P2G-PV34C1
P2G-PV34E1
P2G-PV34J1
P2G-PV34B1

Accessory Products
Bodies
Housings
Valve Stems
Knobs
SSV Main Spring
Springs
Seals

Zinc
Aluminium
Brass
Acetal
Plated Steel
Stainless Steel
Nitrile

Pneumatic

Description
Order code
Cable plug, for CNOMO solenoid
24V, LED+Diode
24V AC/DC, LED+VDR
110V AC/DC, LED+VDR
240V AC/DC, LED+VDR
Black

9125 9980-04
9125 9980-06
9125 9980-08
9125 9980-10
451B

Mini FRLs
Combination dimensions
Filter, Regulator, Lubricator

Filter, Regulator,
Manifold, Lubricator.

Wall mountings

Pneumatic

Filter/Regulator, Lubricator

Filter/Regulator
& Dump Valve

DIN rail

Filter/Regulator, Lubricator,
Dump valve, Soft start valve

Neck mounting

Mini FRLs
Mounting assemblies
Assembly containing a regulator or filter regulator

Assembly without regulator or filter regulator

Wall brackets mounted at the ends of an assembly

Wall brackets mounted at the ends of an assembly

Wall brackets mounted inside an assembly

Wall brackets mounted inside an assembly

Pneumatic

Mini FRLs
Mounting Kits

DIN rail
Mounting
kit

Angle
Bracket
Mounting

Part no.

Mounting Style

P3A-KA00MKN

DIN rail clip for wall mounting


P3A-KA00CWN or
P3A-KA00MRN

Part no.

Mounting Style

P3A-KA00MRN

Regulator and
Filter/Regulator
bracket mounting

Part no.
Plastic panel
mounting ring

Rear Entry
Connector

Wall
Mounting
kit

Modular
Manifold
Block

Regulator
Tamperproof
Kit

P3A-KA00MPN

Part no.
Metal panel
mounting ring

P3A-KA00MMN

Part no.

Mounting Style

P3A-KA12CRN

Direct G1/4 ported or may


be mounted to butt directly
to machine bulkhead

Part no.

Mounting Style

P3A-KA00CWN

Basic kit for wall mounting


individual Regulator or
Filter/Regulator units

Part no.

Mounting Style

P3A - MA1V

Provides 5 outlets
May be connected in series

Part no.

Mounting Style

P3A - KA00ATN

Prevents unauthorised
adjustment

Pneumatic

x5 per kit

Adjustable Reset Pressure Switches

Modular FRLs

Adjustable Reset Pressure Switches


The Adjustable Reset Pressure Switch is designed to
provide a safeguard for pneumatic systems or machines,
which require a minimum operating pressure to operate
effectively. When the correct pressure is present the switch
provides a constant output signal which should be used to
operate a control valve or device to enable the system to
perform its normal function. If the operating pressure falls
below the set level, the constant output signal is cancelled,
allowing the control valve or device to stop the system in a
safe manner.
Once the pressure rises above the preset threshold, unlike
a conventional pressure switch, the Adjustable Reset
Pressure Switch must be reset before it can once again
transmit the output signal authorising operation. The reset
signal may be manual, pneumatic or electrical.
Versions are available to provide either pneumatic or
electrical output signals or both.

Electrical cable:
3-wire, 0.5mm2
length 2m

Pneumatic characteristics

Electrical characteristics

Pressure range

1,5 to 8 bar max

Electrical output

Temperature range

-100 to +550C

5A / 250V A.C.

Adjustment range

1,5 to 6 bar

5W / 48V D.C.

Precision

0,2 bar

Electrical reset = 1W

On/Off relay

Part nos. Switches

Micro-Solenoid Valve (Non-locking override)

Part no.

Description

Part no.

Description

P3E-KA11SAN

Pneumatic output, manual reset.

P2E-LV32B1

12V. D.C.

P3E-KA11SBN

Pneumatic output, reset.

P2E-LV32C1

24V. D.C.

P3E-KA11SCN

Electrical and pneumatic outputs, manual resets.

P2E-LV32D1

48V. D.C.

P3E-KA11SDN

Electrical and pneumatic outputs, pneumatic reset.

P2E-LV34B1

12V. 50/60Hz

P3E-KA11SEN

Electrical and pneumatic outputs, electrical reset

P2E-LV31C1

24V. 50Hz

P2E-LV33C1

24V. 60Hz

P2E-LV34D1

48 V. 50/60Hz

P2E-LV31F1

115V. 50Hz / 120V. 60Hz

P2E-LV31J1

230V. 50Hz / 240V. 60Hz

for pressure switch

Note: Micro-solenoid not included.


Micro-solenoid valve must be ordered separately.

See cable plugs Page 16


Pneumatic remote controlled reset

Direct pressure return

"On/Off"
indicator

ARPS with
pneumatic
output and
pneumatic
reset

Pressure return through


programmable control

Programmable controller
or other programmable
electronic control

Reset controlled
from the control
panel

Reset from control panel


on the console

Gauge
Pneumatic
push button

Pneumatic outputAdjustment
signal

Pressure taken
upstream of
the ARPS

ARPS with
electrical and
pneumatic
outputs and
with manual
or pneumatic
reset

Pneumatic reset

ARPS with
electrical and
pneumatic
outputs and
with electrical
reset

Adjusting the cut-off pressure

Electrical reset

Pneumatic output
signal
Tamper-proof
sealing plug

Electrical output signal


Adjustment by
allen key (H6)

On all ARPS, the tripping pressure is adjusted


by an allen key. Tamper proof sealing plug
prevents unauthorised adjustment.

Pneumatic

Electrical output signal

Pressure gauges

Modular FRLs
Wide range of pressure gauges
Rear entry and bottom entry options
Back pressure gauge for reclassifier-silencers
Round or square panel mounted gauges
Integrated thread sealing ring

Pressure gauges
Symbol

Description

Pressure
range,
bar

Port
size

Dial
mm

Rear entry

0-2,
0-4
0-10
0-20

G1/8
G1/8
G1/8
G1/8

40
40
40
40

0,062
0,062
0,062
0,062

P3D-KAB1AYN
P3D-KAB1ALN
P3D-KAB1ANN
P3D-KAB1AHN

Rear Entry

0-4
0-11
0-14

G1/8
G1/8
G1/8

50
50
50

0,068
0,068
0,068

P6G-ERB1040
P6G-ERB1110
P6G-ERB1140

Rear entry

0-4
0-14
0-20

G1/4
G1/4
G1/4

50
50
50

0,074
0,074
0,074

P6G-ERB2040
P6G-ERB2140
P6G-ERB2200

Bottom entry

0-11

G1/8

50

0,065

P6G-EBB1110

Panel Mounted Rear Entry

0-14
0-11
0-10

G1/8
G1/8
G1/4

50
63
85

0,066
0,080
0,180

P6G-EPA1140
P6G-FPA1V10
P6G-HPA1100

Square - Panel
Mounted - Rear Entry

0-10
0-4
0-10

G1/8
G1/8
G1/8

50x50
75x75
75x75

0,100
0,200
0,190

P6G-RPA1100
P6G-TPA1040
P6G-TPA1100

Rear Entry BackPressure


(Reclassifiers)

0-2

G1/8

40

0,062

P6G-DEB1020

Panel mounting gauges


Panel mounting gauges have a threaded body and are
supplied complete with a plastic mounting collar.

Pneumatic

Weight
Kg

Order code

Modular FRLs
Filter Spare Kits
Model

Spares and Replacement Parts


Mini Series
P3A

Junior Series
P3D

Maxi Series
P3E

G1 Series
P3N

Manual drain kit

P3E-KA00DBN

P3E-KA00DBN

P3E-KA00DBN

P3E-KA00DBN

Semi-auto drain kit

P3A-KA00DCN

P3A-KA00DCN

P3A-KA00DCN

P3A-KA00DCN

P3E-KA00DDN

P3E-KA00DDN

Drain Kits

Auto drain kit

Bowl Kits
Poly bowl
Poly bowl with manual drain

P3A-KA00BBA

P3D-KA00BBA

P3E-KA00BBA

Poly bowl with semi-auto drain

P3A-KA00BCA

P3D-KA00BCA

P3E-KA00BCA

Poly bowl with auto drain

P3E-KA00BDA

Metal bowl
Metal bowl with manual drain

P3A-KA00BPA

P3D-KA00BKA

P3E-KA00BKA

Metal bowl with semi-auto drain

P3A-KA00BQA

P3D-KA00BLA

P3E-KA00BLA

Metal bowl with auto drain

P3E-KA00BMA

Compact metal bowl with manual drain

P3E-KA00BTA

Compact metal bowl with semi-auto drain

P3E-KA00BVA

Compact metal bowl with auto drain

P3E-KA00BWA

Filter Element Kits


5 micron element

P3A-KA00EEN

P3D-KA00EEN

P3E-KA00EEN

P3A-KA00EGN

P3D-KA00EGN

P3E-KA00EGN

P3A-KA00ECN

P3D-KA00ECN

P3E-KA00ECN

5 micron element (compact bowl)


40 micron element

P3E-KA00ERN

40 micron element (compact bowl)


Coalescing element

P3NKA00ESG

P3E-KA00ESN

Coalescing element (compact bowl)


Adsorber element

P3NKA00ESE

P3NKA00ESC

P3E-KA00EPN
P3A-KA00EAN

P3D-KA00EAN

Adsorber element (compact bowl)

P3E-KA00EAN

P3NKA00ESA

P3E-KA00ENN

Seal Kits
Poly bowl seal (10 off)

P3A-KA00RZN

P3D-KA00RWN

P3E-KA00RZN

Metal bowl seal (10 off)

P3A-KA00RZN

P3D-KA00RWN

P3E-KA00RWN

Connector O ring (10 off)

P3A-KA00CYN

P3D-KA00CYN

P3E-KA00CYN

Repair kit (self-relieving)

P3D-KA00RRN

P3E-KA00RRN

P3NKA00RR

Repair kit (non-relieving)

P3D-KA00RNN

P3E-KA00RNN

P3NKA00RN

P3E-KA00MMN

Regulator Spare Kits

Metal panel mounting ring

P3A-KA00MMN

P3A-KA00MMN

Plastic panel mounting ring (5 off)

P3A-KA00MPN

P3A-KA00MPN

Tamperproof kit

P3A-KA00ATN

P3A-KA00ATN

Pneumatic

P3E-KA00ATN

Spares and Replacement Parts


Model

Modular FRLs

Mini Series
P3A

Junior Series
P3D

Maxi Series
P3E

G1 Series
P3N

P3A-KA00EEN

P3D-KA00EFA

P3E-KA00EFA

P3NKA00ESE

Filter/Regulator Spare Kits


5 micron element
5 micron element (compact bowl)

P3E-KA00ETA

40 micron element

P3A-KA00EGN

P3D-KA00EHA

40 micron element (compact bowl)

P3E-KA00EHA

P3NKA00ESG

P3E-KA00EVA

Repair kit (self-relieving)

P3D-KA00RRN

P3E-KA00REN

P3NKA00RR

Repair kit (non-relieving)

P3D-KA00RNN

P3E-KA00RGN

P3NKA00RN

P3A-KA00ATN

P3A-KA00ATN

P3E-KA00ATN

P3A-KA00BAA

P3D-KA00BAA

P3E-KA00BAA

Tamperproof kit
For Drain Kits - see Filters on page 62
For Bowl Kits - see Filters on page 62
For Bowl Seal Kit - see Filters on page 62

Lubricator Spare Kits


Plastic bowl without drain
For Manual Drain Kits - see Filters on page 62
For Bowl Kits with Manual Drain - see Filters on page 62
For Bowl Seal Kit - see Filters on page 62

Lubrication of airlines
Satisfactory operation of airline equipment and effective lubrication depends upon the proper selection of lubrication oil. Oils having
a viscosity below ISO3448 Grade 10 to 22 will satisfy most high-speed pneumatic tools and other light duty requirements.
Heavy duty tools and pneumatic valves and cylinders will normally require oils in the viscosity ISO3448 Grade 32 to 68.
Only Paraffinic based oils can be used and the following recommendations are given as a general guide to types of oil that are
suitable for use with Parker airline equipment.

High speed tools and systems

Air Cylinders and valves

Oil Company

ISO Grade

Grade

ISO Grade

Grade

Century Oils

Century P - 198

15

P.W.L.A

32

Alexander Duckham

Zurcon 2

15

Zurcon 4 32

Gulf

Harmony 38AW

15

Harmony 43AW

32

Shell (UK) Oil

Tellus 22

22

Tellus 37

37

Burmah Castrol

Hyspin AWS15

15

Hyspin AWS32

32

Edgar Vaughan

KSO 5L

10

Hydrodrive HP100

32

Esso Petroleum

NUTO 1115

15

NUTO H32

32

B.P.

HLP 22

22

HLP 32

32

Mobile Oil Company

Velocite No.6

10

DTE Oil - Light

32

VPI-A

32

Derwent 32

32

Mobile
Silkolene

Silkair GP22

22

Silkolene

Dove 15

15

Most Parker Pneumatic valves and cylinders are designed for use in non-lube operation. However airline lubrication will increase the
service life.
Note! If oil lubrication is used, it must be maintained for the service life of the product.
Some specialised lubricants, particular synthetic reclaimed oils and low temperature additives, may contain compounds which are
incompatible with certain materials, internal O rings and seals. They may also attack plastic piping or the transparent bowls of the airline
lubricator. Attention is drawn to BS6005 (Specification for moulded transparent polycarbonate bowls used in compressed air filters and
lubricators).
Do not use oils with additives, compounds oils containing solvents, graphite, detergents or synthetic oils.

Pneumatic

Modular Junior FRLs


The System
The Modular system allows units to be connected
together, without the use of pipe connectors, saving
space; providing constant mounting centres; whilst
maintaining a modern aesthetically pleasing
appearance.

The system also allows units to be removed from the


air line without disturbing the fixed pipe connections
greatly simplifying maintenance.
The Modular system comprises Filters, Coalescing
Filters, Adsorbers, Regulators, Combined Filter Regulators and air line Lubricators together with a wide
range of accessory products including Soft Start
Valves, Dump Valves, Manifolds and Rear Entry
Connectors.

The system comprises standard units with a common


body size, body connectors and separate port blocks
with a choice of port thread. This provides the
designer with a truly modular system which can be
adapted and expanded to suit the future needs of the
application.

Filter/regulator
Port
Block

Wall
Mounting
Regulator
angle
bracket kit

Rear Entry
Connector

Lubricator

Regulator

Filter
Dump valve
Body connector

Manifold

Coloured knobs
Ball valve

Pneumatic

16 bar

Orange

8 bar

Black

4 bar

Grey

2 bar

Blue

Soft Start Valve

Modular Junior FRLs


Popular combinations
1

/4" FRL Combinations

5 micron elements, 8 bar regulator + gauge and wall mounting brackets

P3D-CB12BGB

Ports

Bowl - Drain

Flow @ 6 bar

Transparent Bowl
Manual Drain

Transparent Bowl
Semi -Auto Drain

Metal Bowl
Manual Drain

Metal Bowl
Semi-Auto Drain

l/min

dm3/s

G1/4

P3D-CB12BGB

P3D-CB12CGB

P3D-CB12KGB

P3D-CB12LGB

1200

20

P3D-CB13BGB

P3D-CB13CGB

P3D-CB13KGB

P3D-CB13LGB

1200

20

G /8

Options:
Part no. P3DOptions:

Upstream
Ball Valve
as first
unit

Downstream
Ball Valve
as last unit

Combination
without Ball
Valve

Pneumatic

F/R+L
combination
F+R+L
combination
F/R L
Combination +
G1/4 ported body
connector after
Filter/Regulator
F/R L
Combination +
Manifold after
Filter/Regulator
FRL
combination
+ Manifold
after Regulator
FRL
combination
+ G1/4 ported
body connector
after Regulator

G1/4

12

Transparent Bowl
Manual Drain

No
Gauge

G3/8

13

Transparent Bowl
Semi-Auto Drain

With
Gauge

Metal Bowl
Manual Drain

Metal Bowl
Semi Auto Drain

Note: For customised combinations consult


Technical Sales Department.

Modular Junior FRLs


Popular combinations
Filter/Regulator - Lubricator Combinations
5 micron elements, 8 bar regulator + gauge and wall mounting brackets

P3D-CA12BGB

Ports

Bowl - Drain

Flow @ 6 bar

Transparent Bowl
Manual Drain

Transparent Bowl
Semi -Auto Drain

Metal Bowl
Manual Drain

Metal Bowl
Semi-Auto Drain

l/min

dm3/s

G1/4

P3D-CA12BGB

P3D-CA12CGB

P3D-CA12KGB

P3D-CA12LGB

1300

21.7

P3D-CA13BGB

P3D-CA13CGB

P3D-CA13KGB

P3D-CA13LGB

1300

21.7

G /8

Options:
Part no. P3DOptions:

Upstream
Ball Valve
as first
unit

Downstream
Ball Valve
as last unit

Combination
without Ball
Valve

Pneumatic

F/R+L
combination
F+R+L
combination
F/R L
Combination +
G1/4 ported body
connector after
Filter/Regulator
F/R L
Combination +
Manifold after
Filter/Regulator
FRL
combination
+ Manifold
after Regulator
FRL
combination
+ G1/4 ported
body connector
after Regulator

G1/4

12

Transparent Bowl
Manual Drain

No
Gauge

G3/8

13

Transparent Bowl
Semi-Auto Drain

With
Gauge

Metal Bowl
Manual Drain

Metal Bowl
Semi Auto Drain

Note: For customised combinations consult


Technical Sales Department.

Modular Junior FRLs


Popular combinations
Filter/Regulator and Ball valve combinations with wall
mounting brackets and port connectors, 5 element,
8 bar secondary pressure
P3D-AN12KGB

Ports Pressure

Metal Bowl

Transparent bowl

Flow @ 6 bar
l/min

dm3/s

P3D-AN12LGB

1100

18.3

P3D-AN13LGB

1380

23

P3D-AN12CGB

1100

18.3

P3D-AN13CGB

1380

23

max, bar

Manual

Semi-Auto

Manual

Semi-Auto

G /4

17

P3D-AN12KGB

G3/8

17

P3D-AN13KGB

G /4

10

P3D-AN12BGB

G3/8

10

P3D-AN13BGB

Options:

P 3 D

Ball valve
A

Upstream Ball
Valve as first unit

Downstream Ball
Valve as last unit

Thread
12

G1/4

13

G3/8

Note:
For customised combinations consult
Technical Sales Department.

Pneumatic

Bowl / drain
B

Transparent Bowl
Manual Drain

Transparent Bowl
Semi-Auto Drain

Metal Bowl
Manual Drain

Metal Bowl
Semi Auto Drain

Gauge
N

Without gauge

With gauge

Modular Junior FRLs


Popular combinations
Dump valve and soft start valve combinations
with wall mounting brackets

P3D-CS12QMS

Ports

Solenoid operated dump valve + manual set point soft start valve

Flow @ 6 bar

24V DC

Valve without Solenoid

l/min

dm3/s

G /4

P3D-CS12GMB2CC

P3D-CS12GMB000

2500

41.7

G3/8

P3D-CS13GMB2CC

P3D-CS13GMB000

2500

41.7

Valves other than 24 V DC to be purchased less solenoid and solenoid ordered separately.
Ports

Pilot operated dump valve + manual set point soft start valve

l/min

dm3/s

G1/4

P3D-CS12QMB

2500

41.7

P3D-CS13QMB

2500

41.7

G /8

Options:
Part no. P3D-

Options:

G1/4

12

Solenoid operated
dump valve

G3/8

13

Air pilot operated


dump valve

Note: For customised combinations consult


Technical Sales Department.

Pneumatic

24V DC

2CC

Valve without
solenoid

000

Modular Junior FRLs


Filters

Symbols
1

Manual drain

Semi auto drain

Choice of transparent nylon or metal bowls with convex


integral sight glasses.
Quick release bowl mechanism - added safety, bowl
cannot be removed whilst pressurised.
Sight glass can be located in 900 increments.
Elastomatic filter elements shrug off larger dirt particles
as flow varies.
5 micron elements as standard, option 40 micron.
No tools required for dismantling or cleaning element routine servicing without removing from line.

Options:
P3D - FA

G1/4

12

13

G /8

Without
00
Port blocks

Transparent Bowl
Manual Drain
Transparent Bowl
Semi Auto Drain
Metal Bowl
Manual Drain
Metal Bowl
Semi Auto Drain

5 Micron
Element
Std

40 Micron
Element

C
K
L
Note: For customised combinations consult
Technical Sales Department.

Technical information

53,5

66,5
59

34

43,5

M4

10
149

Weight (g)
without port blocks

31

130

Temperature range:

76,5

4,5

Flow @ 7 bar
Inlet 0.7 bar
pressure drop
Pressure range:

Standard 5 micron
Option 40 micron
1200 l/min - G1/8 20 dm3/s
1980 l/min - G1/4 33 dm3/s
2760 l/min - G3/8 46 dm3/s
10 bar max Nylon bowl
17 bar max Metal bowl
-10OC to +50OC Nylon bowl
-10OC to +75OC Metal bowl
276g Nylon bowl
450g Metal bowl

12 11

Filter element grade:

Dimensions (mm)

Flow characteristics
G1/8

G1/4

G3/8

Pressure drop (bar)

0,7
0,6

For accessories and port blocks see page 37.

0,5
0,4

For Repair Kits and Spares see page 62 and 63.

0,3
0,2
0,1
10

20
30
Air flow l/s at 7 bar inlet

Pneumatic

40

50

Modular Junior FRLs


Coalescing filters and Adsorbers
Coalescing filters
Removes oil and water aerosols.
Maximum oil carry over 0.02 mg/m3
All units interchangeable and removable without disturbing
pipework, by simply unscrewing retaining screws.
Captive retaining screws automatically realign and reseal
units when refitting.

Adsorbers
Removes hydro-carbon vapours.
Removes oil vapour carry-over.
Activated carbon element.
For breathable air applications.
Maximum oil carry over 0.005 mg/m3

Options:
P3D - FA

G1/4

12

13

G /8

Transparent Bowl
Manual Drain
Transparent Bowl
Semi Auto Drain
Metal Bowl
Manual Drain
Metal Bowl
Semi Auto Drain

Without
00
Port blocks

Coalescing
filter

Adsorber
filter

K
L
Note: For customised combinations consult
Technical Sales Department.

Technical information

31

53,5

66,5
59

34

43,5
M4

10

149

99.97% D.O.P. USA Federal


standard
0,3 microns

76,5

130

Maximum particle
passed

0 C to +50 C max.
10 bar max Nylon bowl
17 bar max Metal bowl
276g Transparent bowl
450g Metal bowl
240 l/min - 4 dm3/s at 7 bar inlet

4,5

Weight (g)
without port blocks
Maximum
recommended flow
Efficiency

Dimensions (mm)
O

12 11

Temperature range:
Pressure range:

For accessories and port blocks see page 37.


For Repair Kits and Spares see page 62 and 63.

Pneumatic

Modular Junior FRLs


Symbols

Regulators

3
1

Self bleed regulator


with gauge

Non bleed regulator

One balanced, self relieving, diagram operated unit for


all flows and combinations - optional non-relieving unit
available.
Simple push to lock non-rising adjustment knob with
low operating torque; easily tamperproofed.
Panel mounting ring available.
Excess secondary pressure relieves at low differential.
Four secondary pressure ranges available, with colour
coded adjustment knobs.
16 bar Orange, 8 bar Black, 4 bar Grey, 2 bar Blue

Options:
P3D - RA

G1/4

12

Relieving

G1/4

12

Non-relieving

G3/8

13

0,4 - 8 bar + Gauge


0,4 - 8 bar No Gauge
0,2 - 2 bar + Gauge
0,2 - 2 bar No Gauge
0,2 - 4 bar + Gauge
0,2 - 4 bar No Gauge
0,4 - 16 bar + Gauge
0,4 - 16 bar No Gauge

Without
Port blocks 00

Technical information

G
N
Z
Y
M
L
J
H

Note: For customised combinations


consult Technical Sales
Department.

Dimensions (mm)
1

Gauge port size


Maximum inlet pressure
Flow
Secondary pressure range

G /8
20 bar max
See performance characteristics
Low
0,2 to 2 bar max
Low
0,2 to 4 bar max
Medium 0,4 to 8 bar max
High
0,4 to 16 bar max
-10OC to +75OC
330

Temperature range
Weight (g)
without port blocks

Mounting
hole 30

For accessories and port blocks see page 37.


For Gauges see page 61.
Flow characteristics

Regulation characteristics

G1/4

3
G3/8

G1/8

2
G1/8
G1/8

G3/8

G1/4

31,0
30,3

2,0

6,0

50
12

10,0

2
4
6
8
10
Air flow l/s at 7 bar inlet

25,0

Pneumatic

5,3
5,2

31,5
31,0

20
30
40
Air flow l/s at 7 bar inlet

G1/4

R3,0

10

G1/4

G3/8

R18,0

Secondary pressure (bar)

G1/8

Flow 10 dm3/s
(1/4, 3/8 ports)

5,4
5,0

11,50

G3/8

Flow 1 dm3/s
(1/8, 1/4, 3/8 ports)

12,0

R5,0

Secondary pressure (bar)

Regulator angle bracket


2,85
2,75

52,0

Modular Junior FRLs


Symbol

Filter/Regulators

Choice of metal bowl with convex sight glass or


transparent nylon bowl.
Elastomatic filter elements shrug off larger dirt particles
as flow varies.
5 micron element as standard, option 40 micron.
One balanced, self relieving, diagram operated unit for
all flows and combinations - optional non-relieving unit
available.
Simple push to lock non-rising adjustment knob with low
operating torque; easily tamperproofed.
Four secondary pressure ranges available, with colour
coded adjustment knobs.
16 bar Orange, 8 bar Black, 4 bar Grey, 2 bar Blue

Options:
P3D - EA
G1/8
G1/4
G3/8

P
11
12
13

Without
00
Port blocks

Transparent Bowl
Manual Drain
Transparent Bowl
Semi Auto Drain
Metal Bowl
Manual Drain
Metal Bowl
Semi Auto Drain

5 Micron
Element
Std

C
K
L

40 Micron
Element

Secondary pressure range

Filter element grade


Temperature range

Relieving
Nonrelieving

B
N

Note: For customised combinations


consult Technical Sales
Department.

Technical information
Gauge port size
Maximum inlet pressure

0,4 - 8 bar + Gauge

0,4 - 8 bar No Gauge

0,2 - 2 bar + Gauge

0,2 - 2 bar No Gauge

0,2 - 4 bar + Gauge

0,2 - 4 bar No Gauge

0,4 - 16 bar + Gauge

0,4 - 16 bar No Gauge

Dimension (mm)
1

G /8
Metal bowls
17 bar max
Nylon bowls
10 bar max
Low
0,2 to 2 bar max
Low
0,2 to 4 bar max
Medium 0,4 to 8 bar max
High
0,4 to 16 bar max*
Standard 5 micron
Option
40 micron
-10OC to +50OC Nylon bowl
-10OC to +75OC Metal bowl

Mounting
hole 30

For performance graphs see Regulator page 27.

For accessories and port blocks see page 37.


For Gauges see page 61.
For Repair Kits and Spares see page 62 and 63.

Pneumatic

Modular Junior FRLs


Lubricators

Symbols

Lubricator

Lubricator
with drain

Choice of transparent nylon or metal bowls with convex


integral sight glasses.
Quick release bowl mechanism - added safety bowls
cannot be removed whilst pressurised.
Sight glass can be located in 900 increments.
Constant density lubrication with fingertip
adjustment.
Low flow oil pick up capability.
3600 drip rate sight glass gives all round visibility,
contained in separately serviceable cartridge.

Options:

Thread
11

G1/8

12

G1/4

13

G3/8

00

Without

Bowl / drain
A

Transparent Bowl
Without Drain

Transparent Bowl
Manual Drain

Metal Bowl
Manual Drain

Technical information

76,5
66,5
59

53,5
34
31

43,5

Flow characteristics
G1/8

7
Pressure drop (bar)

6
G1/4

5
4

G /8

3
2
1
2

10 12 14 16 18 20 22 24

Air flow dm3/sec at 7 bar inlet

Pneumatic

For accessories and port blocks see page 37.


For Repair Kits and Spares see page 62 and 63.

166,5

M4

10

149

Flow
Weight (g)
without port blocks
Minimum flow for oil pick up
Bowl capacity
Recommended lubricants

10 bar max Nylon bowl


17 bar max Metal bowl
-10OC to +50OC Nylon bowl
-10OC to +75OC Metal bowl
See performance characteristics
286g Nylon bowl
456g Metal bowl
0,25 dm3/s
55 cm3
See page 63

130

Temperature range:

Dimensions (mm)

4,5

Pressure range:

12 11

P 3 D

Modular Junior FRLs


The controlled introduction of pressure can be an
important safety factor and prevent damage to tooling etc.
when air pressure is introduced at machine start up.
The soft start valve is an ideal method of providing a fully
adjustable controlled introduction of pressure.

Soft Start Valve Operation:


The switch point is set via the control knob and is fully
adjustable between 1 and 5 bar. Additionally the bleed
orifice which delays the rise in pressure is supplied as
standard in several diameters:1,5mm, 2,2mm, 3mm, and 3,8mm.
These are field interchangeable by removing the top plug
of the valve.

The soft start valve will, when set, allow the pressure to
gradually build to the set point before fully opening to
deliver full flow at line pressure.
In normal operation the soft start valve is assembled, in
series, with an accompanying air pilot, solenoid pilot or
manually actuated dump valve. This is used as an on - off
switch for line pressure, and for exhausting the system.

Typical combinations
Soft start and
dump valve

Fig. 1.
FRL

Air supply to
m/c or system

Air supply

Fig. 2.
FRL
Air supply

Air supply to
m/c or system

Soft start and


dump valve
Soft start and
dump valve
Air supply to
m/c or system

Fig.1. enables part of a system to be isolated and the air


dumped to atmosphere whilst operating another part
normally.

Fig. 2. shows the Soft Start and Dump valve assembled as


part of the main 1/4" Modular FRL combination feeding an
entire system.

Effect of orifice on flow characteristics


of pneumatic switch (with 1.5mm bleed orifice)

Flow characteristics for ('Soft Start' valve)

10 seconds
to exhausts

A B C

Pressure drop (bar)

Inlet pressure 10 bar

6
5
4

6.3

4
2.5

1.6

1
0
Time
secs.

10

20

30

10 bar inlet
10 litre volume

40

50

60

70

80

A 1 to 3 turns
B 4 turns
C 5 turns
D 6 turns
E 7 turns
F 8 turns

Pneumatic

10

20

30

40
50
Flow (dm3/s)

60

70

80

90

Modular Junior FRLs


Soft Start Valves

Symbol

Manually operated
Controlled induction of pressure
Fully adjustable switch point

Options:
P 3 D

0
Thread

Technical information
Max. inlet pressure

10 bar max.

Temperature range

-100C +500C

Flow @ 6 bar

2500 l/min - 41.7 dm3/s

Weight

428g

Note: For materials see page 34.

Pneumatic

Gauge

11

G1/8

Without

12

G1/4

With

13

G3/8

00

Without

Dimensions

Modular Junior FRLs


Symbol

Remotely Operated Dump Valves

Air pilot or solenoid pilot operated dump valves


Low Watt solenoid coils
Valves for other than 24 V DC to be purchased less
solenoid & solenoid ordered separately.

Options:
P 3 D

D A

Thread

Piloting

Solenoid

Voltage

G1/8

SG Solenoid

None

CN 24 VDC

12

G1/4

SC CNOMO
Solenoid

DC

00

13

G3/8

00

Without

11

PQ Air pilot

Without Solenoid

For alternative solenoids


see page 16.

Dimensions

Technical information
Max. inlet pressure

10 bar max.

Temperature range

-100C +500C

4 mm push-in
air-pilot connection

Flow @ 6 bar
Through valve

to exhaust
3

2500 l/min - 41.7 dm /s


Weight

2000 l/min - 33.3 dm3/s


484g

Note: For materials see page 34.

Operation
Remotely operated dump valves automatically shut off
upstream pressure and exhaust the downstream
pressure when the pilot pressure is released.
To maintain these units in the open position a pilot supply
to the air pilot operated version or an electrical signal to
the solenoid operated version mist be maintained.
The valve will automatically dump when the holding
signal is removed.

Pneumatic

Muffler included with each product.

Modular Junior FRLs


Manually Operated Dump Valves

Symbol

BISTABLE version
The dumping of downstream pressure is manually actuated
by depressing the knob.
To reset, both effective upstream pressure and a manual lift
of the knob is required.

MONOSTABLE version . 2 exhaust dump functions


Manually, by maintaining the button thrust down during time
required to dump the downstream pressure.
Automatically, when the upstream pressure falls below the
set pressure threshold.
To reset, effective upstream pressure and a manual lift of the
knob is required.

Shuts off upstream and dumps downstream pressure.


Choice of red or black knobs.
G1/8, G1/4 or G3/8 ports.
Ventral G1/4 exhaust port.
Padlockable version.
2 position or latching versions.

MONOSTABLE dump valves are an important element in


machine safety considerations. After a unexpected upstream
pressure failure, e.g compressor break down), system
pressure reset will be only be obtained by lifting the knob
combined with having an effective upstream pressure.

Options:
P 3 D

D A

Knob / Function

Thread

Locking Clip

11

G1/8

Black - 2 position

Without Locking Clip

12

G1/4

Red - 2 position

With Locking Clip

13

G3/8

Red - Latching

Without

Black - Latching

00

Technical information
Max. inlet pressure

10 bar max.

Temperature range

-100C +500C

Dimensions

Flow @ 6 bar
Through valve

to exhaust

2600 l/min - 43.3 dm3/s 2800 l/min - 46.7 dm3/s


Weight

360g

Note: For materials see page 34.


Flow characteristics:
Inlet to secondary

Flow characteristics:
Secondary to exhaust

Muffler included with each product.

Pneumatic

Solenoids for Soft Start and Dump Valves


Solenoids for Dump Valves (15mm solenoid)
Supplied with cable plug and non-locking flush
manual override
Voltage

Order code

12VDC
24VDC
12V 50Hz/60Hz
24V 50Hz
115V 50Hz/120VAC 60Hz
230V 50Hz/240VAC 60Hz

P2E-KV32BN
P2E-KV32CN
P2E-KV34BN
P2E-KV31CN
P2E-KV31FN
P2E-KV31JN

Cable plugs 15 mm (8 mm pin spacing) IP 65


Description

Order code

Large headed screw for


inaccessible or recess position
Standard to be wired universal
P8C-C
To be wired LED+protection 24 VDC P8C-C26C
With standard screw
Standard to be wired universal
P8C-D
To be wired LED+protection 24 VDC P8C-D26C
With cable and standard screw
Standard with 2 m cable
Standard with 5 m cable
LED+protection 24 VAC/DC, 2 m
LED+protection 24 VAC/DC, 5 m

P8L-C2
P8L-C5
P8L-C226C
P8L-C526C

Solenoids for Dump Valves (CNOMO solenoid)


Supplied with cable plug and
non-locking override
Voltage
CNOMO-Solenoids

Order code

24VDC (48V 50Hz)


24V/50Hz/60Hz (11VDC)
110V/50Hz/60Hz (50VDC)
230V/50Hz/60Hz (120VDC)
12V/50Hz/60Hz (6VDC)

P2G-PV32C1
P2G-PV34C1
P2G-PV34E1
P2G-PV34J1
P2G-PV34B1

Description
Order code
Cable plug, for CNOMO solenoid
24V, LED+Diode
24V AC/DC, LED+VDR
110V AC/DC, LED+VDR
240V AC/DC, LED+VDR
Black

Pneumatic

9125 9980-04
9125 9980-06
9125 9980-08
9125 9980-10
451B

Modular Junior FRLs


Junior Modular Ball Valve

Symbol

3
2

Positive bubble tight shut-off.


Upstream and downstream versions.
Padlockable version.
Ventral G1/4 exhaust port.

Connection

Pressure
max, bar

Actuation

Note

Weight
Kg

Order code

Flow @ 6 bar
l/min
dm3/s

Upstream

10

Hand

Standard

0,230

P3D-VA00A0N

1400

23.3

Downstream

10

Hand

Standard

0,230

P3D-VA00B0N

1400

23.3

Upstream

10

Hand

3 Padlock Facility

0,255

P3D-VA00P0N

1400

23.3

Downstream

10

Hand

3 Padlock Facility

0,255

P3D-VA00R0N

1400

23.3

Upstream

10

Hand

6 Padlock Facility

0,260

P3D-VA00Q0N

1400

23.3

Downstream

10

Hand

6 Padlock Facility

0,260

P3D-VA00S0N

1400

23.3

Note! Modular Ball valves have an integral body connector on one side and a slot to accept a port block or body connector on the other.
Note! Cannot be used separately.

Materials
Filter

Regulator

Body
Fixing Screws
Bowl (metal)
Bowl (transparent)
Sight Glass
Louvre
Element
Manual Drain
Semi-Auto Drain
Springs
Seals

Zinc
Plated Steel
Zinc
Polyamide
Polyamide
Acetal
Nylon 6
Acetal
Acetal / Brass
Stainless Steel
Nitrile

Lubricator

Body
Fixing Screws
Control Knob
Adjusting Screw
Spring Rest (upper)
Spring Rest (lower)
Spring
Diaphragm
Valve Stem
Valve Seat
Bottom Cap
Springs
Seals

Zinc
Plated Steel
Acetal
Plated Steel
Brass
Steel / Brass
Plated Steel
Nitrile / Nylon
Brass
Nitrile
Acetal
Stainless Steel
Nitrile

Accessory Products

Body
Fixing Screws
Bowl (metal)
Bowl (transparent)
Sight Glass
Knob
Venturi Valve
Transfer Tube
Tube Retainer
Springs
Seals
Fill Plug

Zinc
Plated Steel
Zinc
Polyamide
Polyamide
Acetal
Acetal
Nylon
Brass
Stainless Steel
Nitrile
Aluminium

Pneumatic

Bodies
Housings
Fixing Screws
Knobs
Valve Stems
SSV Main Spring
Springs
Seals
Body Connectors
Port Blocks

Zinc
Aluminium
Plated Steel
Acetal
Brass
Plated Steel
Stainless Steel
Nitrile
Zinc
Zinc

Modular Junior FRLs


Dimensions
The modular system ensures constant mounting centres;
assemblies are fixed to the special wall brackets by a
single fixing screw.

Filter, Regulator, Lubricator

Ball valve, Filter, Regulator,


Lubricator, Manifold

All dimensions in (mm).

Pneumatic

Filter/Regulator, Lubricator

Ball Valve +
Filter/Regulator

Filter/Regulator, Lubricator,
Dump valve, Soft start valve

Modular Junior FRLs


Mounting assemblies
Assembly containing a regulator or filter regulator

Assembly without regulator or filter regulator

Wall brackets mounted at the ends of an assembly

Wall brackets mounted at the ends of an assembly

Neck mounting bracket on Filter/Regulator

Popular combination with wall mounting brackets

Pneumatic

Adjustable Reset Pressure Switches

Modular FRLs

Adjustable Reset Pressure Switches


The Adjustable Reset Pressure Switch is designed to
provide a safeguard for pneumatic systems or machines,
which require a minimum operating pressure to operate
effectively. When the correct pressure is present the switch
provides a constant output signal which should be used to
operate a control valve or device to enable the system to
perform its normal function. If the operating pressure falls
below the set level, the constant output signal is cancelled,
allowing the control valve or device to stop the system in a
safe manner.
Once the pressure rises above the preset threshold, unlike
a conventional pressure switch, the Adjustable Reset
Pressure Switch must be reset before it can once again
transmit the output signal authorising operation. The reset
signal may be manual, pneumatic or electrical.
Versions are available to provide either pneumatic or
electrical output signals or both.

Electrical cable:
3-wire, 0.5mm2
length 2m

Pneumatic characteristics

Electrical characteristics

Pressure range

1,5 to 8 bar max

Electrical output

Temperature range

-100 to +550C

5A / 250V A.C.

Adjustment range

1,5 to 6 bar

5W / 48V D.C.

Precision

0,2 bar

Electrical reset = 1W

On/Off relay

Part nos. Switches

Micro-Solenoid Valve (Non-locking override)

Part no.

Description

Part no.

Description

P3E-KA11SAN

Pneumatic output, manual reset.

P2E-LV32B1

12V. D.C.

P3E-KA11SBN

Pneumatic output, reset.

P2E-LV32C1

24V. D.C.

P3E-KA11SCN

Electrical and pneumatic outputs, manual resets.

P2E-LV32D1

48V. D.C.

P3E-KA11SDN

Electrical and pneumatic outputs, pneumatic reset.

P2E-LV34B1

12V. 50/60Hz

P3E-KA11SEN

Electrical and pneumatic outputs, electrical reset

P2E-LV31C1

24V. 50Hz

P2E-LV33C1

24V. 60Hz

P2E-LV34D1

48 V. 50/60Hz

P2E-LV31F1

115V. 50Hz / 120V. 60Hz

P2E-LV31J1

230V. 50Hz / 240V. 60Hz

for pressure switch

Note: Micro-solenoid not included.


Micro-solenoid valve must be ordered separately.

See cable plugs Page 16


Pneumatic remote controlled reset

Direct pressure return

"On/Off"
indicator

ARPS with
pneumatic
output and
pneumatic
reset

Pressure return through


programmable control

Programmable controller
or other programmable
electronic control

Reset controlled
from the control
panel

Reset from control panel


on the console

Gauge
Pneumatic
push button

Pneumatic outputAdjustment
signal

Pressure taken
upstream of
the ARPS

ARPS with
electrical and
pneumatic
outputs and
with manual
or pneumatic
reset

Pneumatic reset

ARPS with
electrical and
pneumatic
outputs and
with electrical
reset

Adjusting the cut-off pressure

Electrical reset

Pneumatic output
signal
Tamper-proof
sealing plug

Electrical output signal


Adjustment by
allen key (H6)

On all ARPS, the tripping pressure is adjusted


by an allen key. Tamper proof sealing plug
prevents unauthorised adjustment.

Pneumatic

Electrical output signal

Pressure gauges

Modular FRLs
Wide range of pressure gauges
Rear entry and bottom entry options
Back pressure gauge for reclassifier-silencers
Round or square panel mounted gauges
Integrated thread sealing ring

Pressure gauges
Symbol

Description

Pressure
range,
bar

Port
size

Dial
mm

Rear entry

0-2,
0-4
0-10
0-20

G1/8
G1/8
G1/8
G1/8

40
40
40
40

0,062
0,062
0,062
0,062

P3D-KAB1AYN
P3D-KAB1ALN
P3D-KAB1ANN
P3D-KAB1AHN

Rear Entry

0-4
0-11
0-14

G1/8
G1/8
G1/8

50
50
50

0,068
0,068
0,068

P6G-ERB1040
P6G-ERB1110
P6G-ERB1140

Rear entry

0-4
0-14
0-20

G1/4
G1/4
G1/4

50
50
50

0,074
0,074
0,074

P6G-ERB2040
P6G-ERB2140
P6G-ERB2200

Bottom entry

0-11

G1/8

50

0,065

P6G-EBB1110

Panel Mounted Rear Entry

0-14
0-11
0-10

G1/8
G1/8
G1/4

50
63
85

0,066
0,080
0,180

P6G-EPA1140
P6G-FPA1V10
P6G-HPA1100

Square - Panel
Mounted - Rear Entry

0-10
0-4
0-10

G1/8
G1/8
G1/8

50x50
75x75
75x75

0,100
0,200
0,190

P6G-RPA1100
P6G-TPA1040
P6G-TPA1100

Rear Entry BackPressure


(Reclassifiers)

0-2

G1/8

40

0,062

P6G-DEB1020

Panel mounting gauges


Panel mounting gauges have a threaded body and are
supplied complete with a plastic mounting collar.

Pneumatic

Weight
Kg

Order code

Modular FRLs
Filter Spare Kits
Model

Spares and Replacement Parts


Mini Series
P3A

Junior Series
P3D

Maxi Series
P3E

G1 Series
P3N

Manual drain kit

P3E-KA00DBN

P3E-KA00DBN

P3E-KA00DBN

P3E-KA00DBN

Semi-auto drain kit

P3A-KA00DCN

P3A-KA00DCN

P3A-KA00DCN

P3A-KA00DCN

P3E-KA00DDN

P3E-KA00DDN

Drain Kits

Auto drain kit

Bowl Kits
Poly bowl
Poly bowl with manual drain

P3A-KA00BBA

P3D-KA00BBA

P3E-KA00BBA

Poly bowl with semi-auto drain

P3A-KA00BCA

P3D-KA00BCA

P3E-KA00BCA

Poly bowl with auto drain

P3E-KA00BDA

Metal bowl
Metal bowl with manual drain

P3A-KA00BPA

P3D-KA00BKA

P3E-KA00BKA

Metal bowl with semi-auto drain

P3A-KA00BQA

P3D-KA00BLA

P3E-KA00BLA

Metal bowl with auto drain

P3E-KA00BMA

Compact metal bowl with manual drain

P3E-KA00BTA

Compact metal bowl with semi-auto drain

P3E-KA00BVA

Compact metal bowl with auto drain

P3E-KA00BWA

Filter Element Kits


5 micron element

P3A-KA00EEN

P3D-KA00EEN

P3E-KA00EEN

P3A-KA00EGN

P3D-KA00EGN

P3E-KA00EGN

P3A-KA00ECN

P3D-KA00ECN

P3E-KA00ECN

5 micron element (compact bowl)


40 micron element

P3E-KA00ERN

40 micron element (compact bowl)


Coalescing element

P3NKA00ESG

P3E-KA00ESN

Coalescing element (compact bowl)


Adsorber element

P3NKA00ESE

P3NKA00ESC

P3E-KA00EPN
P3A-KA00EAN

P3D-KA00EAN

Adsorber element (compact bowl)

P3E-KA00EAN

P3NKA00ESA

P3E-KA00ENN

Seal Kits
Poly bowl seal (10 off)

P3A-KA00RZN

P3D-KA00RWN

P3E-KA00RZN

Metal bowl seal (10 off)

P3A-KA00RZN

P3D-KA00RWN

P3E-KA00RWN

Connector O ring (10 off)

P3A-KA00CYN

P3D-KA00CYN

P3E-KA00CYN

Repair kit (self-relieving)

P3D-KA00RRN

P3E-KA00RRN

P3NKA00RR

Repair kit (non-relieving)

P3D-KA00RNN

P3E-KA00RNN

P3NKA00RN

P3E-KA00MMN

Regulator Spare Kits

Metal panel mounting ring

P3A-KA00MMN

P3A-KA00MMN

Plastic panel mounting ring (5 off)

P3A-KA00MPN

P3A-KA00MPN

Tamperproof kit

P3A-KA00ATN

P3A-KA00ATN

Pneumatic

P3E-KA00ATN

Spares and Replacement Parts


Model

Modular FRLs

Mini Series
P3A

Junior Series
P3D

Maxi Series
P3E

G1 Series
P3N

P3A-KA00EEN

P3D-KA00EFA

P3E-KA00EFA

P3NKA00ESE

Filter/Regulator Spare Kits


5 micron element
5 micron element (compact bowl)

P3E-KA00ETA

40 micron element

P3A-KA00EGN

P3D-KA00EHA

40 micron element (compact bowl)

P3E-KA00EHA

P3NKA00ESG

P3E-KA00EVA

Repair kit (self-relieving)

P3D-KA00RRN

P3E-KA00REN

P3NKA00RR

Repair kit (non-relieving)

P3D-KA00RNN

P3E-KA00RGN

P3NKA00RN

P3A-KA00ATN

P3A-KA00ATN

P3E-KA00ATN

P3A-KA00BAA

P3D-KA00BAA

P3E-KA00BAA

Tamperproof kit
For Drain Kits - see Filters on page 62
For Bowl Kits - see Filters on page 62
For Bowl Seal Kit - see Filters on page 62

Lubricator Spare Kits


Plastic bowl without drain
For Manual Drain Kits - see Filters on page 62
For Bowl Kits with Manual Drain - see Filters on page 62
For Bowl Seal Kit - see Filters on page 62

Lubrication of airlines
Satisfactory operation of airline equipment and effective lubrication depends upon the proper selection of lubrication oil. Oils having
a viscosity below ISO3448 Grade 10 to 22 will satisfy most high-speed pneumatic tools and other light duty requirements.
Heavy duty tools and pneumatic valves and cylinders will normally require oils in the viscosity ISO3448 Grade 32 to 68.
Only Paraffinic based oils can be used and the following recommendations are given as a general guide to types of oil that are
suitable for use with Parker airline equipment.

High speed tools and systems

Air Cylinders and valves

Oil Company

ISO Grade

Grade

ISO Grade

Grade

Century Oils

Century P - 198

15

P.W.L.A

32

Alexander Duckham

Zurcon 2

15

Zurcon 4 32

Gulf

Harmony 38AW

15

Harmony 43AW

32

Shell (UK) Oil

Tellus 22

22

Tellus 37

37

Burmah Castrol

Hyspin AWS15

15

Hyspin AWS32

32

Edgar Vaughan

KSO 5L

10

Hydrodrive HP100

32

Esso Petroleum

NUTO 1115

15

NUTO H32

32

B.P.

HLP 22

22

HLP 32

32

Mobile Oil Company

Velocite No.6

10

DTE Oil - Light

32

VPI-A

32

Derwent 32

32

Mobile
Silkolene

Silkair GP22

22

Silkolene

Dove 15

15

Most Parker Pneumatic valves and cylinders are designed for use in non-lube operation. However airline lubrication will increase the
service life.
Note! If oil lubrication is used, it must be maintained for the service life of the product.
Some specialised lubricants, particular synthetic reclaimed oils and low temperature additives, may contain compounds which are
incompatible with certain materials, internal O rings and seals. They may also attack plastic piping or the transparent bowls of the airline
lubricator. Attention is drawn to BS6005 (Specification for moulded transparent polycarbonate bowls used in compressed air filters and
lubricators).
Do not use oils with additives, compounds oils containing solvents, graphite, detergents or synthetic oils.

Pneumatic

Modular Junior FRLs


Accessories
Description

Connection

Weight

Order code
Kg

Port connector kits


(2 port blocks + 2 seals)

G1/8

0,150

P3D-KA11CPN

G1/4

0,150

P3D-KA12CPN

G3/8

0,150

P3D-KA13CPN

Without port

0,088

P3D-KA00CBN

With G1/4
ventral port

0,088

P3D-KA12CAN

Wall mounting kit


(2 brackets + 2 screws)

0,048

P3D-KA00MWN

DIN rail mounting kit for


P3A-KA00MRN

0,010

P3A-KA00MKN

Regulator angle bracket kit


(Angle bracket + mounting ring)

0,020

P3A-KA00MRN

Plastic panel mounting ring

0,010

P3A-KA00MPN

Metal panel mounting ring

0,016

P3A-KA00MMN

Regulator Tamperproof kit


(Kit contains 5 pieces)

0,010

P3A-KA00ATN

Body connector

Modular manifold block*


(Includes port plugs)

1 x G1/8
2 x G1/4

0,208

P3D-MA1V

Rear entry connector kit

G1/4

0,120

P3D-KA12CRN

*Note: Modular manifold blocks have an integral Body Connector on one side and a slot to accept a Port Block or Body Connector on the other.

Pneumatic

Modular Maxi FRLs


The System
The Modular system allows units to be connected
together, without the use of pipe connectors, saving
space; providing constant mounting centres; whilst
maintaining a modern aesthetically pleasing
appearance.
The system comprises standard units with a common
body size, body connectors and separate port blocks
with a choice port thread. This provides the designer
with a truly modular system which can be adapted
and expanded to suit the future needs of the
application.

The system also allows units to be removed from the air


line without disturbing the fixed pipe connections greatly
simplifying maintenance.
The Modular system comprises Filters, Coalescing
Filters, Adsorbers, Regulators, Combined Filter Regulators and air line Lubricators together with a wide
range of accessory products including Soft Start Valves,
Dump Valves, Manifolds and Rear Entry Connectors.

Filter/regulator

Port
Block

Regulator
angle
bracket kit

Rear Entry
Connector
Lubricator

Regulator

Combined Soft
Start /Dump Valve

Filter
Body connector

Manifold

Ball valve

Coloured knobs

Pneumatic

16 bar

Orange

8 bar

Black

4 bar

Grey

Modular Maxi FRLs


Popular combinations

FRL Combinations
5 micron elements, 8 bar Regulator + Gauge and Wall Mounting Brackets
Port size High flow
Metal Bowl
Manual Drain
P3E-CB13KGB
G3/8
G1/2
P3E-CB14KGB
G3/4
P3E-CB16KGB

High flow
Metal Bowl
Semi-Auto Drain
P3E-CB13LGB
P3E-CB14LGB
P3E-CB16LGB

High Flow
Metal Bowl
Auto Drain
P3E-CB13MGB
P3E-CB14MGB
P3E-CB16MGB

Transparent
Bowl +
Manual Drain
P3E-CB13BGB
P3E-CB14BGB
P3E-CB16BGB

Transparent
Bowl +
Semi-Auto Drain
P3E-CB13CGB
P3E-CB14CGB
P3E-CB16CGB

Transparent Flow @ 6 bar


Bowl +
l/min dm3/s
Auto Drain
P3E-CB13DGB 3600 60
P3E-CB14DGB 3800 63.3
P3E-CB16DGB 3800 63.3

Filter/Regulator - Lubricator Combinations


5 micron elements, 8 bar Regulator + Gauge and Wall Mounting Brackets
Port size High flow
Metal Bowl
Manual Drain
P3E-CA13KGB
G3/8
G1/2
P3E-CA14KGB
G3/4
P3E-CA16KGB

High flow
Metal Bowl
Semi-Auto Drain
P3E-CA13LGB
P3E-CA14LGB
P3E-CA16LGB

High Flow
Metal Bowl
Auto Drain
P3E-CA13MGB
P3E-CA14MGB
P3E-CA16MGB

Transparent
Bowl +
Manual Drain
P3E-CA13BGB
P3E-CA14BGB
P3E-CA16BGB

Transparent
Bowl +
Semi-Auto Drain
P3E-CA13CGB
P3E-CA14CGB
P3E-CA16CGB

Transparent Flow @ 6 bar


Bowl +
l/min dm3/s
Auto Drain
P3E-CA13DGB 3600 60
P3E-CA14DGB 3600 60
P3E-CA16DGB 3600 60

Part no. P3EOptions:

Upstream
Ball Valve
as first
unit

Downstream
Ball Valve
as last unit

No Ball Valve

Pneumatic

F/R+L
combination
F+R+L
combination
F/R L
Combination +
G1/4 ported body
connector after
Filter/Regulator
F/R L
Combination +
Manifold after
Filter/Regulator
FRL
combination
+ Manifold
after Regulator
FRL
combination
+ G1/4 ported
body connector
after Regulator

G 3/ 8

13

Transparent Bowl
Manual Drain

G 1/ 2

14

Transparent Bowl
Semi-Auto Drain

G 3/ 4

16

Transparent Bowl
Auto Drain

00

High Flow Metal Bowl


Manual Drain
High Flow Metal Bowl
Semi Auto Drain

J
Without
port
blocks
H

High Flow Metal Bowl


Auto Drain
Compact Metal Bowl
Manual Drain
Compact Metal Bowl
Semi Auto Drain
Compact Metal Bowl
Auto Drain

K
L
M
T
V
W

Note: For customised combination consult


Technical Sales Department.

Modular Maxi FRLs


Popular combinations
Filter/Regulator and Ball valve combinations
with wall mounting brackets

Ports Pressure
max, bar

Metal Bowl
Manual

Semi-Auto

Transparent bowl
Auto

Manual

Flow @ 6 bar

Semi-Auto

l/min dm3/s

Auto

G1/2

17

P3E-AN14KGB P3E-AN14LGB P3E-AN14MGB

4000 66.7

G3/4

17

P3E-AN16KGB P3E-AN16LGB P3E-AN16MGB

4000 66.7

G /2

10

P3E-AN14BGB P3E-AN14CGB P3E-AN14DGB

4000 66.7

G3/4

10

P3E-AN16BGB P3E-AN16CGB P3E-AN16DGB

4000 66.7

Options:

P 3 E

Ball valve
A

Upstream Ball
Valve as first unit

Downstream Ball
Valve as last unit

Thread
13 G3/8
14 G1/2
16 G3/4

Transparent Bowl
Manual Drain

Transparent Bowl
Semi-Auto Drain

Transparent Bowl
Auto Drain

High Flow Metal Bowl


Manual Drain
High Flow Metal Bowl
Semi Auto Drain
High Flow Metal Bowl
Auto Drain
Note!
For customised combinations consult
Technical Sales Department.

Pneumatic

Compact Metal Bowl


Manual Drain
Compact Metal Bowl
Semi Auto Drain
Compact Metal Bowl
Auto Drain

K
L
M
T
V
W

Gauge
N

Without gauge

With gauge

Modular Maxi FRLs


Filters

Symbols
1

Manual drain

Auto drain

Semi auto drain

Choice of metal bowls with convex integral sight glasses


or transparent nylon bowls.
Quick release bowl mechanism - added safety, bowl
cannot be removed whilst pressurised.
Sight glass can be located in 900 increments.
Elastomatic filter elements shrug off larger dirt particles
as flow varies.
5 micron elements as standard, option 40 micron.
No tools required for dismantling or cleaning element routine servicing without removing from line.

Options:
P3E - FA

G /8

13

G1/2

14

G /4

Transparent Bowl
Manual Drain
Transparent Bowl
Semi-Auto Drain

16

Without
00
Port blocks

Transparent Bowl
Auto Drain
High Flow Metal Bowl
Manual Drain

High Flow Metal Bowl


Auto Drain
Compact Metal Bowl
Manual Drain
Compact Metal Bowl
Semi Auto Drain

Compact Metal Bowl


Auto Drain

High Flow Metal Bowl


Semi Auto Drain

B
C

Technical information

Flow
Pressure range:
Temperature range:
Weight (g)
without port blocks

For Repair Kits and Spares see pages 62 and 63.


For Accessories and Port Blocks see page 51.

Flow characteristics:
Compact bowl

5 Micron
Element

Note: For customised


combinations consult
Technical Sales Department.

Wall
mounting

Flow characteristics:
High flow bowl
G1/4

G3/8 G1/2 G3/4

G1/4

0,8

0,8

0,7

0,7

Pressure drop (bar)

Pressure drop (bar)

5 Micron
Element
Std

Dimensions (mm)

Standard 5 micron
Option 40 micron
See flow graphs below
10 bar max Nylon bowl
17 bar max Metal bowl
-10OC to +50OC Nylon bowl
-10OC to +75OC Metal bowl
Transparent Bowl
560
Compact Metal Bowl
832
High flow Metal Bowl
946

Compact 158 High flow 188

Filter element grade:

High flow 162,5

12

Compact 132,5

G1/4

0,6
0,5
0,4
0,3
0,2
0,1

G3/8

G1/2

0,6
0,5

G3/4

0,4
0,3
0,2
0,1

0
0

10

20 30 40

50

60 70

80

Air flow dm3/s at 7 bar inlet


0

Pneumatic

90 100

10

20

30 40

50 60 70

80 90 100 110 120

Air flow dm3/s at 7 bar inlet

Modular Maxi FRLs


Coalescing filters and Adsorbers
Coalescing filters
Removes oil and water aerosols.
Maximum oil carry over 0.02 mg/m3
Metal bowls with integral convex sight glasses as standard,
option of manual or auto drain
Sight glass can be located in 90O increments.

Adsorbers
Removes hydro-carbon vapours.
Removes oil vapour carry-over.
Activated carbon element.
For breathable air applications.
Maximum oil carry over 0.005 mg/m3

Options:
P3E - FA

13

G /2

14

G /4

16

Without port 00
blocks

Transparent Bowl
Auto Drain
High Flow Metal Bowl
Manual Drain

High Flow Metal Bowl


Auto Drain
Compact Metal Bowl
Manual Drain
Compact Metal Bowl
Semi Auto Drain

Compact Metal Bowl


Auto Drain

High Flow Metal Bowl


Semi Auto Drain

B
C

Technical information
Compact 420 l/min - 7 dm /s at 6 bar
High flow 720 l/min - 12 dm3/s at 6 bar
@0.7 bar pressure drop
Temperature range: 0OC to +50OC max.
Pressure range:
10 bar max Transparent bowl
17 bar max Metal bowl
Weight (g)
560g Transparent bowl
without port blocks
832g Compact metal bowl
946g High flow metal bowl
Efficiency
99.97% D.O.P. USA Federal
standard 2098
Maximum particle passed 0,3 microns

Flow characteristics:
Element fully saturated - inlet 10 bar

Pressure drop bar

Pressure drop bar

Coalescing C
Adsorber

T
V

Note:
For customised combinations
consult Technical Sales
Department. Adsorber filters
only available with K, T or B
bowl options

Dimensions (mm)

Maximum
recommended flow

Flow characteristics:
Element dry - inlet 10 bar

Flow (dm3/s)

Pneumatic

Flow (dm3/s)

High flow 162,5

G /8
3

Transparent Bowl
Manual Drain
Transparent Bowl
Semi-Auto Drain

Wall
mounting

Compact 132,5

12

Compact 158 High flow 188

G 1/ 4

For Repair Kits and Spares see page 62 and 63.


For Accessories and Port Blocks see page 51.

Modular Maxi FRLs


Symbols

Regulators

3
1

Self bleed regulator


with gauge

Non bleed regulator

One balanced, self relieving, diagram operated unit for


all flows and combinations - optional non-relieving unit
available.
Simple push to lock non-rising adjustment knob with
low operating torque; easily tamperproofed.
Panel mounting ring available.
Excess secondary pressure relieves at low differential.
Four secondary pressure ranges available, with colour
coded adjustment knobs.
16 bar Orange, 8 bar Black, 4 bar Grey

Options:
P3E - RA

G1/4

12

Relieving

G3/8

13

Non-relieving

G1/2

14

G3/4

16

0,4 - 8 bar + Gauge


0,4 - 8 bar No Gauge
0,2 - 4 bar + Gauge
0,2 - 4 bar No Gauge
0,4 - 16 bar + Gauge
0,4 - 16 bar No Gauge

G
N
M
L
J
H

Note: For customised combinations


consult Technical Sales
Department.

Without
00
Port blocks

Technical information

Dimensions (mm)
1

Gauge port size


Maximum inlet pressure
Flow
Secondary pressure range

G /8
20 bar max
See performance characteristics
Low
0,2 to 4 bar max
Medium 0,4 to 8 bar max
High
0,4 to 16 bar max
-10OC to +75OC
756

Temperature range
Weight (g)
without port blocks

Wall
mounting

Panel
mounting

For Accessories and Port Blocks see page 51.


For Repair Kits and Spares see pages 62 and 63.
For Gauges see page 61.
Regulation characteristics: (G1/2)

Flow characteristics

6
G1/2 & G3/4

5
G1/4

G3/8

4
G1/2 & G3/4

G1/4

2
G3/8

G1/4

G3/8
G1/2 & G3/4

Secondary pressure (bar)

Secondary pressure (bar)

5
5

25

3
2

50

5
25
50

5
25

50

5
25

50

0
0

10

20

30

40

50

60
3

70

80 90 100 110 120

Air flow dm /s at 7 bar inlet

Pneumatic

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14

Primary pressure (bar)

Modular Maxi FRLs


Symbol

Filter/Regulators

Choice of metal bowl with convex sight glass or


transparent nylon bowl.
Elastomatic filter elements shrug off larger dirt particles
as flow varies.
5 micron element as standard, option 40 micron.
One balanced, self relieving, diagram operated unit for
all flows and combinations - optional non-relieving unit
available.
Simple push to lock non-rising adjustment knob with low
operating torque; easily tamperproofed.
Four secondary pressure ranges available, with colour
coded adjustment knobs.
16 bar Orange, 8 bar Black, 4 bar Grey

Options:
P3E - EA

N
12

G3/8

13

G1/2

14

G3/4

16

Transparent Bowl
Manual Drain
Transparent Bowl
Semi-Auto Drain

High Flow Metal


B Bowl Auto Drain M
Compact Metal
C Bowl Manual Drain T

Transparent
Bowl Auto Drain

Compact Metal
D Bowl Semi Auto
Drain
High Flow Metal Bowl K
Manual Drain
Compact Metal
High Flow Metal Bowl L Bowl Auto Drain
Semi Auto Drain

Without
00
Port blocks

Technical information
Gauge port size
Filter element grade:
Flow
Max inlet pressure:
Secondary pressure range

Temperature range:
Weight (g)
without port blocks

Relieving

NonRelieving

5 Micron
Element Std

40 Micron
Element

0,4 - 8 bar + Gauge

0,4 - 8 bar No Gauge

0,2 - 4 bar + Gauge

0,2 - 4 bar No Gauge

0,4 - 16 bar + Gauge

0,4 - 16 bar No Gauge

Note: For customised combinations


consult Technical Sales
Department.

Dimensions (mm)
G1/8
Standard 5 micron
Option 40 micron
See characteristics of
Regulators page 43
10 bar max Nylon bowl
17 bar max Metal bowl
Low
0,2 to 4 bar max
Medium 0,4 to 8 bar max
High
0,4 to 16 bar max
-10OC to +50OC Nylon bowl
-10OC to +75OC Metal bowl
Transparent Bowl
808
Compact Metal Bowl
1154
High flow Metal Bowl
1196

Compact 231
High flow 261
Compact 158
High flow 188
Compact 132,5 High flow 162,5

G1/4

For Accessories and Port Blocks see page 51.


For Repair Kits and Spares see pages 62 and 63.
For Gauges see page 61.

Pneumatic

Wall
mounting

Modular Maxi FRLs


Lubricators

Symbols

Lubricator

Lubricator
with drain

Choice of metal bowls with integral sight glasses or


transparent nylon bowls.
Sight glass can be located in 900 increments.
Constant density lubrication with fingertip adjustment.
Low flow oil pick up capability.
3600 drip rate sight glass gives all round visibility,
contained in separately serviceable cartridge.
Internal shut off valve, operated by the filler plug allows
oil filling to be carried out without shutting off air supply.

Options:
-

Thread
12

G1/4

13

G3/8

14

G1/2

16

G3/4

00

Without

Transparent Bowl
Without Drain

Transparent Bowl
Manual Drain

Metal Bowl
Manual Drain

Compact Metal Bowl


Manual Drain

Technical information

Recommended lubricants

High flow 162,5


Compact 132,5

Minimum flow for oil pick up


Bowl capacity

High flow 224

Flow
Weight (g)
without port blocks

10 bar max Nylon bowl


17 bar max Metal bowl
-10OC to +50OC Nylon bowl
-10OC to +75OC Metal bowl
See performance characteristics
Transparent Bowl
588
Compact Metal Bowl
860
High flow Metal Bowl
976
See graph
Compact 100cm3.
High capacity 200cm3.
See page 63

High flow 188

Temperature range:

Dimensions (mm)

Compact 193

Pressure range:

Bowl / drain

Compact 158

P 3 E

Flow characteristics
8

Supply pressure (bar)

For Accessories and Port Blocks see page 51.

Minimum
operating
flow -all
sizes

G1/4

For Repair Kits and Spares see page 62 and 63.

G1/4

6
5
G
1/2

G3/4

3
2
Maximum
recommended
flows (pressure drop 5%
of supply pressure)

1
0

2 3 45 79

2 3 4 56 810

20

Air flow dm3/s at 7 bar inlet

Pneumatic

40 80 100

Wall
mounting

Modular Maxi FRLs


Combined Soft Start and Dump Valve

Symbol

Combines the functions of Soft Start and Dump Valves


Controlled induction of pressure
Fully adjustable bleed rate
Choice of 15mm or CNOMO solenoids
High flow G1/2 exhaust
Integral gauge ports

Options:

P 3 E

Thread

Piloting / gauge

Pilot options

Voltage

13

G3/8

Solenoid, without gauge

15 mm solenoid

00

14

G1/2

Solenoid, with gauge

CNOMO solenoid

CN 24 VDC

16

G3/4

Air pilot, without gauge

00

Without

Air pilot, with gauge

Pilot port threaded


G1/8 for air pilot

Pilot port Push-in


for air pilot version

For alternative solenoids


see page 16.

Technical information

Without Solenoid

Solenoid
0

None

DC

Dimensions

Max. inlet pressure

10 bar max.

Temperature range

-100C +500C

Note: For materials see page 48.


For Gauges see page 61.

Inlet 6.0 bar

Function:
Secondary exhaust

Pressure bar

Pressure bar

Flow characteristics:
Inlet - Secondary

Inlet 6.0 bar

Muffler included with each product.


Flow (dm3/s)

Pneumatic

Seconds

Solenoids for Soft Start and Dump Valves


Solenoids for Dump Valves (15mm solenoid)
Supplied with cable plug and non-locking flush
manual override
Voltage

Order code

12VDC
24VDC
12V 50Hz/60Hz
24V 50Hz
115V 50Hz/120VAC 60Hz
230V 50Hz/240VAC 60Hz

P2E-KV32BN
P2E-KV32CN
P2E-KV34BN
P2E-KV31CN
P2E-KV31FN
P2E-KV31JN

Cable plugs 15 mm (8 mm pin spacing) IP 65


Description

Order code

Large headed screw for


inaccessible or recess position
Standard to be wired universal
P8C-C
To be wired LED+protection 24 VDC P8C-C26C
With standard screw
Standard to be wired universal
P8C-D
To be wired LED+protection 24 VDC P8C-D26C
With cable and standard screw
Standard with 2 m cable
Standard with 5 m cable
LED+protection 24 VAC/DC, 2 m
LED+protection 24 VAC/DC, 5 m

P8L-C2
P8L-C5
P8L-C226C
P8L-C526C

Solenoids for Dump Valves (CNOMO solenoid)


Supplied with cable plug and
non-locking override
Voltage
CNOMO-Solenoids

Order code

24VDC (48V 50Hz)


24V/50Hz/60Hz (11VDC)
110V/50Hz/60Hz (50VDC)
230V/50Hz/60Hz (120VDC)
12V/50Hz/60Hz (6VDC)

P2G-PV32C1
P2G-PV34C1
P2G-PV34E1
P2G-PV34J1
P2G-PV34B1

Description
Order code
Cable plug, for CNOMO solenoid
24V, LED+Diode
24V AC/DC, LED+VDR
110V AC/DC, LED+VDR
240V AC/DC, LED+VDR
Black

Pneumatic

9125 9980-04
9125 9980-06
9125 9980-08
9125 9980-10
451B

Modular Maxi FRLs


Manually Operated Dump Valves

Symbol

BISTABLE version
The dumping of downstream pressure is manually actuated
by depressing the knob.
To reset, both effective upstream pressure and a manual lift
of the knob is required.

MONOSTABLE version . 2 exhaust dump functions


Manually, by maintaining the button thrust down during time
required to dump the downstream pressure.
Automatically, when the upstream pressure falls below the
set pressure threshold.
To reset, effective upstream pressure and a manual lift of the
knob is required.

Shuts off upstream and dumps downstream pressure.


Air latching or 2 position versions.
Choice of red or black knobs.

MONOSTABLE dump valves are an important element in


machine safety considerations. After a unexpected upstream
pressure failure, e.g compressor break down), system
pressure reset will be only be obtained by lifting the knob
combined with having an effective upstream pressure.

Ventral G1/4 exhaust port.


Padlockable version.

Options:
P 3 E

D A

Thread

Knob / Function

Locking Clip

13

G3/8

Black 2 Position

Without Locking Clip

14

G1/2

Red 2 Position

With Locking Clip

16

G3/4

Red Latching

00

Without

Black Latching

Technical information

Dimensions

Max. inlet pressure

20 bar max.

Operating pressure

7 bar max

Temperature range

-100C +750C

Flow @ 6 bar
Through valve

to exhaust
3

3300 l/min - 55 dm /s
Weight (g)

2700 l/min - 45 dm3/s


720g

Flow characteristics:
Inlet to secondary

Flow characteristics:
Secondary to exhaust

Muffler included with each product.

Pneumatic

Modular Maxi FRLs


Maxi Modular Ball Valve

Symbol
3
1

Positive bubble tight shut-off.


Upstream and downstream versions.
Key lockable versions.
Padlockable version.
Ventral G3/8 exhaust port.
Connection

Pressure

Actuation

Note

Weight

max, bar
Upstream

Order code

Flow @ 6 bar

Kg

10

Hand

l/min

dm3/s

Standard

0,470

P3E-VA00A0N

4000

66.7

Downstream

10

Hand

Standard

0,470

P3E-VA00B0N

4000

66.7

Upstream

10

Hand

Key Locking

0,670

P3E-VA00K0N

4000

66.7

Upstream

10

Hand

3 Padlock Facility

0,532

P3E-VA00P0N

4000

66.7

Downstream

10

Hand

3 Padlock Facility

0,532

P3E-VA00R0N

4000

66.7

Upstream

10

Hand

6 Padlock Facility

0,542

P3E-VA00Q0N

4000

66.7

Downstream

10

Hand

6 Padlock Facility

0,542

P3E-VA00S0N

4000

66.7

* Note! Modular Ball valves have an integral Body Connector on one side and a slot to accept a Port Block or Body Connector on the other.
Note! Cannot be used separately.

Materials
Filter

Regulator

Body
Fixing Screws
Bowl (metal)
Bowl (transparent)
Sight Glass
Louvre
Element
Manual Drain
Semi-Auto Drain
Auto-Drain
Springs
Seals

Zinc
Plated Steel
Zinc
Polyamide
Polyamide
Acetal
Nylon
Acetal
Plastic / Brass
Acetal / Brass
Stainless Steel
Nitrile

Body
Fixing Screws
Control Knob
Adjusting Screw
Spring Rest (upper)
Spring Rest (lower)
Spring
Diaphragm
Valve Stem
Valve Seat
Bottom Cap
Springs
Seals

Zinc
Plated Steel
Acetal
Plated Steel
Brass
Steel / Brass
Steel
Nitrile / Nylon
Brass
Nitrile
Nylon 6 glass filled
Stainless Steel
Nitrile

Accessory Products

Lubricator
Body
Fixing Screws
Bowl (metal)
Bowl (transparent)
Sight Glass
Knob
Venturi Valve
Transfer Tube
Tube Retainer
Springs
Seals
Fill Plug

Zinc
Plated Steel
Zinc
Polyamide
Polyamide
Acetal
Acetal
Nylon
Brass
Stainless Steel
Nitrile
Plastic

Pneumatic

Bodies
Housings
Fixing Screws
Knobs
Valve Stems
SSV Main Spring
Springs
Seals
Port Connectors
Body Connectors

Zinc
Aluminium
Plated Steel
Acetal
Brass
Plated Steel
Stainless Steel
Nitrile
Zinc
Zinc

Modular Maxi FRLs


Dimensions
The modular system ensures constant mounting
centres; assemblies are fixed to the special wall
brackets by a single fixing screw.

Filter, Regulator, Lubricator

Filter/Regulator, Lubricator

Ball Valve +
Filter/Regulator

3,0

* Transparent bowl option dimensions


identical to high capacity version.

Ball valve, Filter, Regulator,


Manifold, Lubricator.

All dimensions in (mm).

Pneumatic

Filter/Regulator, Lubricator,
Combined Soft start and Dump valve

Modular Maxi FRLs


Mounting assemblies
Assembly containing a regulator or filter regulator

Assembly without regulator or filter regulator

Wall brackets mounted at the ends of an assembly

Wall brackets mounted at the ends of an assembly

Neck mounting bracket on Filter/Regulator

Popular combination with wall mounting brackets

Pneumatic

Modular Maxi FRLs


Accessories
Description

Connection

Weight
Kg

Order code

Port connector kits


(2 port blocks + 2 seals)

G1/4

0,144

P3E-KA12CPN

G3/8

0,144

P3E-KA13CPN

G1/2

0,134

P3E-KA14CPN

G3/4

0,124

P3E-KA16CPN

Without port

0,156

P3E-KA00CBN

With G1/4
ventral port

0,156

P3E-KA12CAN

Wall mounting kit


(2 brackets + 2 screws)

0,140

P3E-KA00MWN

Regulator angle bracket kit


(Angle bracket + mounting ring)

0,800

P3E-KA00MSN

Panel mounting ring only

0,400

P3E-KA00MMN

Regulator Tamperproof kit


(Kit contains 5 pieces)

0,010

P3E-KA00ATN

Body connector

Modular manifold block*


(Includes port plugs)

1 x G1/8
1 x G1/4
2 x G1/2

0,340

P3E-MA1V

Rear entry connector kit

G1/2

0,240

P3E-KA14CRN

*Note: Modular manifold blocks have an integral Body Connector on one side and a slot to accept a Port Block or Body Connector on the other.

Pneumatic

Adjustable Reset Pressure Switches

Modular FRLs

Adjustable Reset Pressure Switches


The Adjustable Reset Pressure Switch is designed to
provide a safeguard for pneumatic systems or machines,
which require a minimum operating pressure to operate
effectively. When the correct pressure is present the switch
provides a constant output signal which should be used to
operate a control valve or device to enable the system to
perform its normal function. If the operating pressure falls
below the set level, the constant output signal is cancelled,
allowing the control valve or device to stop the system in a
safe manner.
Once the pressure rises above the preset threshold, unlike
a conventional pressure switch, the Adjustable Reset
Pressure Switch must be reset before it can once again
transmit the output signal authorising operation. The reset
signal may be manual, pneumatic or electrical.
Versions are available to provide either pneumatic or
electrical output signals or both.

Electrical cable:
3-wire, 0.5mm2
length 2m

Pneumatic characteristics

Electrical characteristics

Pressure range

1,5 to 8 bar max

Electrical output

Temperature range

-100 to +550C

5A / 250V A.C.

Adjustment range

1,5 to 6 bar

5W / 48V D.C.

Precision

0,2 bar

Electrical reset = 1W

On/Off relay

Part nos. Switches

Micro-Solenoid Valve (Non-locking override)

Part no.

Description

Part no.

Description

P3E-KA11SAN

Pneumatic output, manual reset.

P2E-LV32B1

12V. D.C.

P3E-KA11SBN

Pneumatic output, reset.

P2E-LV32C1

24V. D.C.

P3E-KA11SCN

Electrical and pneumatic outputs, manual resets.

P2E-LV32D1

48V. D.C.

P3E-KA11SDN

Electrical and pneumatic outputs, pneumatic reset.

P2E-LV34B1

12V. 50/60Hz

P3E-KA11SEN

Electrical and pneumatic outputs, electrical reset

P2E-LV31C1

24V. 50Hz

P2E-LV33C1

24V. 60Hz

P2E-LV34D1

48 V. 50/60Hz

P2E-LV31F1

115V. 50Hz / 120V. 60Hz

P2E-LV31J1

230V. 50Hz / 240V. 60Hz

for pressure switch

Note: Micro-solenoid not included.


Micro-solenoid valve must be ordered separately.

See cable plugs Page 16


Pneumatic remote controlled reset

Direct pressure return

"On/Off"
indicator

ARPS with
pneumatic
output and
pneumatic
reset

Pressure return through


programmable control

Programmable controller
or other programmable
electronic control

Reset controlled
from the control
panel

Reset from control panel


on the console

Gauge
Pneumatic
push button

Pneumatic outputAdjustment
signal

Pressure taken
upstream of
the ARPS

ARPS with
electrical and
pneumatic
outputs and
with manual
or pneumatic
reset

Pneumatic reset

ARPS with
electrical and
pneumatic
outputs and
with electrical
reset

Adjusting the cut-off pressure

Electrical reset

Pneumatic output
signal
Tamper-proof
sealing plug

Electrical output signal


Adjustment by
allen key (H6)

On all ARPS, the tripping pressure is adjusted


by an allen key. Tamper proof sealing plug
prevents unauthorised adjustment.

Pneumatic

Electrical output signal

Pressure gauges

Modular FRLs
Wide range of pressure gauges
Rear entry and bottom entry options
Back pressure gauge for reclassifier-silencers
Round or square panel mounted gauges
Integrated thread sealing ring

Pressure gauges
Symbol

Description

Pressure
range,
bar

Port
size

Dial
mm

Rear entry

0-2,
0-4
0-10
0-20

G1/8
G1/8
G1/8
G1/8

40
40
40
40

0,062
0,062
0,062
0,062

P3D-KAB1AYN
P3D-KAB1ALN
P3D-KAB1ANN
P3D-KAB1AHN

Rear Entry

0-4
0-11
0-14

G1/8
G1/8
G1/8

50
50
50

0,068
0,068
0,068

P6G-ERB1040
P6G-ERB1110
P6G-ERB1140

Rear entry

0-4
0-14
0-20

G1/4
G1/4
G1/4

50
50
50

0,074
0,074
0,074

P6G-ERB2040
P6G-ERB2140
P6G-ERB2200

Bottom entry

0-11

G1/8

50

0,065

P6G-EBB1110

Panel Mounted Rear Entry

0-14
0-11
0-10

G1/8
G1/8
G1/4

50
63
85

0,066
0,080
0,180

P6G-EPA1140
P6G-FPA1V10
P6G-HPA1100

Square - Panel
Mounted - Rear Entry

0-10
0-4
0-10

G1/8
G1/8
G1/8

50x50
75x75
75x75

0,100
0,200
0,190

P6G-RPA1100
P6G-TPA1040
P6G-TPA1100

Rear Entry BackPressure


(Reclassifiers)

0-2

G1/8

40

0,062

P6G-DEB1020

Panel mounting gauges


Panel mounting gauges have a threaded body and are
supplied complete with a plastic mounting collar.

Pneumatic

Weight
Kg

Order code

Modular FRLs
Filter Spare Kits
Model

Spares and Replacement Parts


Mini Series
P3A

Junior Series
P3D

Maxi Series
P3E

G1 Series
P3N

Manual drain kit

P3E-KA00DBN

P3E-KA00DBN

P3E-KA00DBN

P3E-KA00DBN

Semi-auto drain kit

P3A-KA00DCN

P3A-KA00DCN

P3A-KA00DCN

P3A-KA00DCN

P3E-KA00DDN

P3E-KA00DDN

Drain Kits

Auto drain kit

Bowl Kits
Poly bowl
Poly bowl with manual drain

P3A-KA00BBA

P3D-KA00BBA

P3E-KA00BBA

Poly bowl with semi-auto drain

P3A-KA00BCA

P3D-KA00BCA

P3E-KA00BCA

Poly bowl with auto drain

P3E-KA00BDA

Metal bowl
Metal bowl with manual drain

P3A-KA00BPA

P3D-KA00BKA

P3E-KA00BKA

Metal bowl with semi-auto drain

P3A-KA00BQA

P3D-KA00BLA

P3E-KA00BLA

Metal bowl with auto drain

P3E-KA00BMA

Compact metal bowl with manual drain

P3E-KA00BTA

Compact metal bowl with semi-auto drain

P3E-KA00BVA

Compact metal bowl with auto drain

P3E-KA00BWA

Filter Element Kits


5 micron element

P3A-KA00EEN

P3D-KA00EEN

P3E-KA00EEN

P3A-KA00EGN

P3D-KA00EGN

P3E-KA00EGN

P3A-KA00ECN

P3D-KA00ECN

P3E-KA00ECN

5 micron element (compact bowl)


40 micron element

P3E-KA00ERN

40 micron element (compact bowl)


Coalescing element

P3NKA00ESG

P3E-KA00ESN

Coalescing element (compact bowl)


Adsorber element

P3NKA00ESE

P3NKA00ESC

P3E-KA00EPN
P3A-KA00EAN

P3D-KA00EAN

Adsorber element (compact bowl)

P3E-KA00EAN

P3NKA00ESA

P3E-KA00ENN

Seal Kits
Poly bowl seal (10 off)

P3A-KA00RZN

P3D-KA00RWN

P3E-KA00RZN

Metal bowl seal (10 off)

P3A-KA00RZN

P3D-KA00RWN

P3E-KA00RWN

Connector O ring (10 off)

P3A-KA00CYN

P3D-KA00CYN

P3E-KA00CYN

Repair kit (self-relieving)

P3D-KA00RRN

P3E-KA00RRN

P3NKA00RR

Repair kit (non-relieving)

P3D-KA00RNN

P3E-KA00RNN

P3NKA00RN

P3E-KA00MMN

Regulator Spare Kits

Metal panel mounting ring

P3A-KA00MMN

P3A-KA00MMN

Plastic panel mounting ring (5 off)

P3A-KA00MPN

P3A-KA00MPN

Tamperproof kit

P3A-KA00ATN

P3A-KA00ATN

Pneumatic

P3E-KA00ATN

Spares and Replacement Parts


Model

Modular FRLs

Mini Series
P3A

Junior Series
P3D

Maxi Series
P3E

G1 Series
P3N

P3A-KA00EEN

P3D-KA00EFA

P3E-KA00EFA

P3NKA00ESE

Filter/Regulator Spare Kits


5 micron element
5 micron element (compact bowl)

P3E-KA00ETA

40 micron element

P3A-KA00EGN

P3D-KA00EHA

40 micron element (compact bowl)

P3E-KA00EHA

P3NKA00ESG

P3E-KA00EVA

Repair kit (self-relieving)

P3D-KA00RRN

P3E-KA00REN

P3NKA00RR

Repair kit (non-relieving)

P3D-KA00RNN

P3E-KA00RGN

P3NKA00RN

P3A-KA00ATN

P3A-KA00ATN

P3E-KA00ATN

P3A-KA00BAA

P3D-KA00BAA

P3E-KA00BAA

Tamperproof kit
For Drain Kits - see Filters on page 62
For Bowl Kits - see Filters on page 62
For Bowl Seal Kit - see Filters on page 62

Lubricator Spare Kits


Plastic bowl without drain
For Manual Drain Kits - see Filters on page 62
For Bowl Kits with Manual Drain - see Filters on page 62
For Bowl Seal Kit - see Filters on page 62

Lubrication of airlines
Satisfactory operation of airline equipment and effective lubrication depends upon the proper selection of lubrication oil. Oils having
a viscosity below ISO3448 Grade 10 to 22 will satisfy most high-speed pneumatic tools and other light duty requirements.
Heavy duty tools and pneumatic valves and cylinders will normally require oils in the viscosity ISO3448 Grade 32 to 68.
Only Paraffinic based oils can be used and the following recommendations are given as a general guide to types of oil that are
suitable for use with Parker airline equipment.

High speed tools and systems

Air Cylinders and valves

Oil Company

ISO Grade

Grade

ISO Grade

Grade

Century Oils

Century P - 198

15

P.W.L.A

32

Alexander Duckham

Zurcon 2

15

Zurcon 4 32

Gulf

Harmony 38AW

15

Harmony 43AW

32

Shell (UK) Oil

Tellus 22

22

Tellus 37

37

Burmah Castrol

Hyspin AWS15

15

Hyspin AWS32

32

Edgar Vaughan

KSO 5L

10

Hydrodrive HP100

32

Esso Petroleum

NUTO 1115

15

NUTO H32

32

B.P.

HLP 22

22

HLP 32

32

Mobile Oil Company

Velocite No.6

10

DTE Oil - Light

32

VPI-A

32

Derwent 32

32

Mobile
Silkolene

Silkair GP22

22

Silkolene

Dove 15

15

Most Parker Pneumatic valves and cylinders are designed for use in non-lube operation. However airline lubrication will increase the
service life.
Note! If oil lubrication is used, it must be maintained for the service life of the product.
Some specialised lubricants, particular synthetic reclaimed oils and low temperature additives, may contain compounds which are
incompatible with certain materials, internal O rings and seals. They may also attack plastic piping or the transparent bowls of the airline
lubricator. Attention is drawn to BS6005 (Specification for moulded transparent polycarbonate bowls used in compressed air filters and
lubricators).
Do not use oils with additives, compounds oils containing solvents, graphite, detergents or synthetic oils.

Pneumatic

Pneumatic

Service and Replacement Parts

P3A, P3D & P3E Series Modular Filters


Filter Elements
Description

Kit Part Number


P3A Mini Series

P3D Junior Series

P3E Maxi Series

5 micron element (standard)

P3A-KA00EEN

P3D-KA00EEN

P3E-KA00EEN

5 micron compact element

Not used

Not used

P3E-KA00ERN

40 micron element

P3A-KA00EGN

P3D-KA00EGN

P3E-KA00EGN

40 micron compact element

Not used

Not used

P3E-KA00ESN

Coalescing element

P3A-KA00ECN

P3D-KA00ECN

P3E-KA00ECN

Coalescing compact element

Not used

Not used

P3E-KA00EPN

Adsorber element

P3A-KA00EAN

P3D-KA00EAN

P3E-KA00EAN

Adsorber compact element

Not used

Not used

P3E-KA00ENN

Replacement Bowl Kits (Metal)


Description

Kit Part Number


P3A Mini Series

P3D Junior Series

P3E Maxi Series

Metal bowl with manual drain

P3A-KA00BPA

P3D-KA00BKA

P3E-KA00BKA

Metal bowl with semi-auto drain

P3A-KA00BQA

P3D-KA00BLA

P3E-KA00BLA

Metal bowl with auto drain

P3E-KA00BMA

Compact bowl/manual drain

Not used

Not used

P3E-KA00BTA

Compact bowl/semi-auto drain

Not used

Not used

P3E-KA00BVA

Compact bowl/auto drain

Not used

Not used

P3E-KA00BWA

Pneumatic

Service and Replacement Parts

P3A, P3D & P3E Series Modular Filters


Replacement Bowl Kits (Polyamide)
Kit Part Number

Description

P3A Mini Series

P3D Junior Series

P3E Maxi Series

Polyamide bowl with manual drain

P3A-KA00BBA

P3D-KA00BBA

P3E-KA00BBA

Polyamide bowl with semi-auto drain

P3A-KA00BCA

P3D-KA00BCA

P3E-KA00BCA

Polyamide bowl with auto drain

P3E-KA00BDA

Bowl Seal Kits (Contains 10 replacement Seals)

Description

Kit Part Number


P3A Mini Series

P3D Junior Series

P3E Maxi Series

Metal bowl

P3A-KA00RZN

P3D-KA00RWN

P3E-KA00RWN

Polyamide bowl

P3A-KA00RZN

P3D-KA00RWN

P3E-KA00RZN

Drain Kits
Description

Kit Part Number


P3A Mini Series

P3D Junior Series

P3E Maxi Series

Manual drain

P3E-KA00DBN

P3E-KA00DBN

P3E-KA00DBN

Semi-Auto Drain

P3A-KA00DCN

P3A-KA00DCN

P3A-KA00DCN

Auto-Drain

Available 2001

Available 2001

P3E-KA00DDN

Seal Kits
Description
Replacement seals

Kit Part Number


P3A Mini Series

P3D Junior Series

P3E Maxi Series

1539R

2539R

4539R

Pneumatic

Service and Replacement Parts

P3A, P3D & P3E Series Modular Pressure Regulators

Description

Kit Part Number


P3A Mini Series

P3D Junior Series

P3E Maxi Series

Repair Kit, Self-bleed

Non-repairable

P3D-KA00RRN

P3E-KA00RRN

Repair Kit, Non-bleed

Non-repairable

P3D-KA00RNN

P3E-KA00RRN

Panel Mounting Ring (metal)

P3A-KA00MMN

P3A-KA00MMN

P3E-KA00MMN

Panel Mounting Ring (plastic)

P3A-KA00MPN

P3A-KA00MPN

Not available

Tamperproof Kit ( 5 circlips)

P3A-KA00ATN

P3A-KA00ATN

P3E-KA00ATN

Gauge Port Plug (10 plugs)

P3D-KAB1APN

P3D-KAB1APN

P3D-KAB1APN

Pressure Gauges
Pressure Range

Gauge Part Number


P3A Mini Series

P3D Junior Series

P3E Maxi Series

0 10 bar (standard)

P3D-KAB1ANN

P3D-KAB1ANN

P3D-KAB1ANN

0 2 bar

P3D-KAB1AYN

P3D-KA001AYN

Not required

0 4 bar

P3D-KAB1ALN

P3D-KAB1ALN

P3D-KAB1ALN

0 20 bar

Not required

P3D-KAB1AHN

P3D-KAB1AHN

Pneumatic

Service and Replacement Parts

P3A, P3D & P3E Series Modular Filter- Regulators


Filter Elements
Description

Kit Part Number


P3A Mini Series

P3D Junior Series

P3E Maxi Series

5 micron element (standard)

P3A-KA00EEN

P3D-KA00EFA

P3E-KA00EFA

5 micron compact element

Not used

Not used

P3E-KA00ETA

40 micron element

P3A-KA00EGN

P3D-KA00EHA

P3E-KA00EHA

40 micron compact element

Not used

Not used

P3E-KA00EVA

Replacement Bowl Kits (Metal)


Description

Kit Part Number


P3A Mini Series

P3D Junior Series

P3E Maxi Series

Metal bowl with manual drain

P3A-KA00BPA

P3D-KA00BKA

P3E-KA00BKA

Metal bowl with semi-auto drain

P3A-KA00BQA

P3D-KA00BLA

P3E-KA00BLA

Metal bowl with auto drain

P3E-KA00BMA

Compact bowl/manual drain

Not used

Not used

P3E-KA00BTA

Compact bowl/semi-auto drain

Not used

Not used

P3E-KA00BVA

Compact bowl/auto drain

Not used

Not used

P3E-KA00BWA

Replacement Bowl Kits (Polyamide)


Description

Kit Part Number


P3A Mini Series

P3D Junior Series

P3E Maxi Series

Polyamide bowl with manual drain

P3A-KA00BBA

P3D-KA00BBA

P3E-KA00BBA

Polyamide bowl with semi-auto drain

P3A-KA00BCA

P3D-KA00BCA

P3E-KA00BCA

Polyamide bowl with auto drain

P3E-KA00BDA

Pneumatic

Service and Replacement Parts

P3A, P3D & P3E Series Modular Filter- Regulators

Bowl Seal Kits (Contains 10 replacement Seals)

Description

Kit Part Number


P3A Mini Series

P3D Junior Series

P3E Maxi Series

Metal bowl

P3A-KA00RZN

P3D-KA00RWN

P3E-KA00BRWN

Polyamide bowl

P3A-KA00RZN

P3D-KA00RWN

P3E-KA00RZN

Drain Kits
Description

Kit Part Number


P3A Mini Series

P3D Junior Series

P3E Maxi Series

Manual drain

P3E-KA00DBN

P3E-KA00DBN

P3E-KA00DBN

Semi-Auto Drain

P3A-KA00DCN

P3A-KA00DCN

P3A-KA00DCN

Auto-Drain

Available 2001

Available 2001

P3E-KA00DDN

Pneumatic

Service and Replacement Parts

P3A, P3D & P3E Series Modular Lubricators


Replacement Bowl Kits

Description

Kit Part Number


P3A Mini Series

P3D Junior Series

P3E Maxi Series

Polyamide Bowl, no drain

P3A-KA00BAA

P3D-KA00BAA

P3E-KA00BAA

Polyamide Bowl, manual drain

P3A-KA00BBA

P3D-KA00BBA

P3E-KA00BBA

Metal Bowl, manual drain

P3A-KA00BPA

P3D-KA00BKA

P3E-KA00BKA

Compact Metal Bowl, Man. Dr.

Not used

Not used

P3E-KA00BTA

Bowl Seal Kits (Contains 10 replacement Seals)

Description

Kit Part Number


P3A Mini Series

P3D Junior Series

P3E Maxi Series

Metal bowl

P3A-KA00RZN

P3D-KA00RWN

P3E-KA00RWN

Polyamide bowl

P3A-KA00RZN

P3D-KA00RWN

P3E-KA00RZN

Seal Kits
Description
Replacement seals

Kit Part Number


P3A Mini Series

P3D Junior Series

P3E Maxi Series

1589R

2589R

4589R

Drip Control Assembly


Description
Oil drip control assembly

Kit Part Number


P3A Mini Series

P3D Junior Series

P3E Maxi Series

5589-200

5589-200

5589-200

1" Modular FRLs


The System
The Modular system allows units to be connected
together, without the use of pipe connectors, saving
space; providing constant mounting centres; whilst
maintaining a modern aesthetically pleasing
appearance.

The 1" Series Regulators are designed to provide


quick response and accurate pressure regulation for
the most demanding Hi-flow industrial applications.
The unique solid piston was designed for long troublefree operation and will not rupture or tear under high
cycle or other demanding applications.

The 1" Series filters are specially designed to efficiently


filter out rust, dirt, moisture and other impurities from
compressed air lines. Operation is fully automatic with
a minimum of pressure drop.

The 1" Series mist lubricators are designed to provide


lubrication for many general purpose applications in a
pneumatic system.

Filter Regulator
Wall mounting
bracket
Regulator

Combination
mounting bolts
Lubricator

Filter
All units body ported
G1 (BSPP)
Optional port blocks
G3/4, G1, G11/2
Wall mounting
bracket

Pneumatic

52

1" Modular FRLs


Combinations

P3NCB18SEMNNLMB

P3NCA18SEMNNLMB

Typical Combination
1" FRL

Typical Combination
Filter/Regulator - Lubricato

5 micron elements, 8 bar regulator


+ wall mounting brackets

5 micron elements, 8 bar regulator


+ wall mounting brackets

P3N

Modular
Combinations
Units
Filter/reg +
Lubricator

Metal bowl with


sight glass

Port type
'G' Thread
1
(BSPP)

Filter+Regulator
B
+ Lubricator

Port size
3/4" ports
(1" units with 3/4" L
port extensions)
1" ports
(without port
8
extensions)
1" ports
M
(with 1" port
extensions)

Wall mounting
brackets

Filter elements
40 micron element
G
(Standard)
5 micron element
(Optional)

Regulator type
B
Relieving
Non-relieving N

Metal bowl
No drain

Filter drain options


M
Manual Drain
Semi-auto Drain S

1.1/2" ports
(1" units with 1.1/2" B
port extensions

Auto Drain

Lubricator drain
options
Metal bowl
M
Manual drain

Reg. Pressure
range
Without gauge
Y
0 - 2 bar
0 - 4 bar

0 - 8 bar

0 - 16 bar

With gauge

Pneumatic

53

0 - 2 bar

0 - 4 bar

0 - 8 bar

0 - 16 bar

1" Modular FRLs


Filters

Symbols
1

Manual drain

Auto drain

Semi auto drain

Port blocks available to provide G3/4 and G11/2 port


extension to G1 ported bodies.
Excellent water removal efficiency.
Metal bowl with sight gauge.
Larger filter element surface guarantees low pressure
drop and increased element life.
Manual drain, Semi-Auto or Auto Drain options.

Options:
P3N

Port type
'G' Thread
1
(BSPP)

Filter

Port size
3/4" ports
(1" units with 3/4" L
port extensions)
1" ports
8
(without port
extensions)
1.1/2" ports
(1" units with 1.1/2" B
port extensions

Technical information

Filter elements
40 micron element
G
(Standard)

Bowl/drain options
Metal bowl
SM
Manual drain

5 micron element
(Optional)

Metal bowl
Semi-auto drain

SS

Metal bowl
Auto drain

SA

Dimensions (mm)

Port size

G1

Filter element grade:

Standard 40 micron

Pressure range:

17 bar max

Temperature range:

-20OC to +80OC

Option 5 micron

Note: For materials see page 59.

Flow characteristics
Inlet pressure

Port size

Weight
(kg)

G1

92

254

35

92

1.6

For accessories and port blocks see page 59.

Pneumatic

54

1" Modular FRLs


Coalescing filters

Symbols
1

Manual drain

Auto drain

Semi auto drain

DPI indicator as standard


Port blocks available to provide G3/4 and G11/2 port
extension to G1 ported bodies.
Excellent water removal efficiency.
Metal bowl with sight gauge or plastic bowl with steel
cover available.
Larger filter element surface guarantees low pressure
drop and increased element life.
Manual drain as standard, optional auto drain or
semi-auto drain available.

Options:
P3N

Coalescing
Filter

Port type
'G' Thread
1
(BSPP)

Port size
3/4" ports
(1" units with 3/4" L
port extensions)
1" ports
(without port
8
extensions)
1.1/2" ports
(1" units with 1.1/2" B
port extensions

Technical information

Filter elements
Coalescing Grade 6
with pressure drop
indicator (Standard)
Coalescing Grade 10
with pressure drop
indicator
Adsorber element
with pressure drop
indictor
Adsorber element
without pressure
drop indictor

Bowl/drain options
Metal bowl
SM
Manual drain

Metal bowl
Semi-auto drain

SS

Metal bowl
Semi-auto drain

SA

Dimensions (mm)

Port size

G1

Coalescing element
grade:

0.3 micron Grade 6

Pressure range:

17 bar max

Temperature range:

-20OC to +80OC

Note: For materials see page 59.


Flow characteristics
Inlet pressure

Port size

Weight
(kg)

G1

92

254

35

92

1.6

For accessories and port blocks see page 59.

Pneumatic

55

1" Modular FRLs


Symbols

Regulators

3
1

Self bleed regulator


with gauge

Non bleed regulator

Port blocks available to provide G3/4 and G11/2 port


extension to G1 ported bodies
Self relieving feature plus balanced poppet provides
quick response and accurate pressure regulation.
Solid control piston for extended life.

Options:
P3N

Port type
'G' Thread
1
(BSPP)

Regulator

Port size
3/4" ports
(1" units with 3/4" L
port extensions)
1" ports
8
(without port
extensions)
1.1/2" ports
(1" units with 1.1/2" B
port extensions

Technical information

Regulator
Pressure range
With gauge
Without gauge
Y

0 - 2 bar

0 - 4 bar

0 - 4 bar

0 - 8 bar

0 - 8 bar

0 - 16 bar

0 - 16 bar

0 - 2 bar

Dimensions (mm)

Port size

G1

Gauge ports:

G1/4

Max inlet pressure (p1):

17 bar max

Secondary pressure range:

Standard:

0.1 to 8 bar

(p2)

Option 1:

0.1 to 2 bar

Option 2:

0.1 to 4 bar

Option 3:

0.3 to 16 bar

Temperature range:

Regulator type
B
Relieving
Non-relieving N

-20 C to +80OC

Note: For materials see page 59.


Flow characteristics
Inlet pressure

Port size

Weight
(kg)

G1

92

53

162

92

1.9

For accessories and port blocks see page 59.

Pneumatic

56

1" Modular FRLs


Symbol

Filter/Regulators

Port blocks are available to provide G3/4 and G11/2 port


extension to G1 ported bodies.
Self relieving feature plus balanced poppet provides
quick response and accurate pressure regulation.
Solid control piston for extended life.

Options:
P3N

Port size
3/4" ports
(1" units with 3/4" L
port extensions)

Filter/
Regulator
Port type
'G' Thread
1
(BSPP)

1" ports
(without port
8
extensions)
1.1/2" ports
(1" units with 1.1/2" B
port extensions

Filter elements
Bowl/drain options
40 micron element
Metal bowl
G
SM
(Standard)
Manual drain
5 micron element
(Optional)

Technical information

SS

Metal bowl
Auto drain

SA

Relieving
Spring rating
With gauge

Without gauge
Y
0 - 2 bar

0 - 2 bar

0 - 4 bar

0 - 4 bar

0 - 8 bar

0 - 8 bar

0 - 16 bar

0 - 16 bar

Dimensions (mm)

Port size

G1

Gauge ports:

G1/4

Max inlet pressure (p1):

17 bar max

Secondary pressure range:

Standard:

0.1 to 8 bar

(p2)

Option 1:

0.1 to 2 bar

Option 2:

0.1 to 4 bar

Option 3:

0.3 to 16 bar

Temperature range:

Metal bowl
Semi-auto drain

-20 C to +80OC

Note: For materials see page 59.


Flow characteristics
Inlet pressure

Port size

Weight
(kg)

G1

92

243

162

92

2.4

For accessories and port blocks see page 59.

Pneumatic

57

1" Modular FRLs


Lubricators

Symbols

Lubricator

Lubricator
with drain

Port blocks available to provide G3/4 and G11/2 port


extension to G1 ported bodies.
Proportional oil delivery over a wide range of air flows.
Bowl can be filled while air line is under pressure.
Transparent sight dome for 360O visibility.

Options:
P3N

L
Port type
'G' Thread
1
(BSPP)

Lubricator

Port size
3/4" ports
(1" units with 3/4" L
port extensions)

Bowl/drain options
Metal bowl
SM
Manual drain

1" ports
(without port
8
extensions)
1.1/2" ports
(1" units with 1.1/2" B
port extensions

SN

Technical information

Metal bowl
No drain

Dimensions (mm)

Port size

G1

Max inlet pressure (p1):

17 bar max

Min flow oil pickup:

3.7 l/sec

Bowl capacity:

300cc

Recommended lubricant:

See page 63

Temperature range:

-20OC to +80OC

Note: For materials see page 59.

Flow characteristics
Inlet pressure

Port size

Weight
(kg)

G1

92

230

71.3

92

1.6

For accessories and port blocks see page 59.

Pneumatic

58

1" Modular FRLs


Air pilot regulators
Port blocks available to provide G3/4 and G11/2 port
extension to G1 ported bodies.
Self relieving feature plus balanced poppet provides
quick response and accurate pressure regulation.
Solid control piston for extended life.

Order code

P3NRA18BPP

Port Block Kits

A (PB)

92

142

92

86

53

139

G1/4

Mounting brackets

Order code
Description

Connection

Weight
Kg

Order Code

Kits for single Units


or Combinations
without Lubricators
(2 port blocks + 2 seals)

G3 / 4
G1
G11/2

574
554
534

P3NKB16CP
P3NKB18CP
P3NKB1BCP

Kits for Combinations


with Lubricators
(2 port blocks + 2 seals)

G3 / 4
G1
G11/2

574
554
534

P3NKB16CL
P3NKB18CL
P3NKB1BCL

P3NKA00MW

For 3/4 & 1" sizes

P3NKB00MW For 1.1/2" port size

45

33

60

50

70

Body Covers
Order code
P3NKA00PM
Each kit contains two covers.

Materials
Filter

Regulator

Body
Bowl
Deflector
Drain
Seals
Element
Sight Glass

Aluminium
Aluminium
Plastic
Plastic
Nitril
Plastic
Polyamide

Adjustment Stem
Body
Bonnet
Knob
Piston
Poppet Assembly
Seals
Spring (Poppet & Control)

Steel
Aluminium
Aluminium
Plastic
Plastic
Brass
Nitrile
Steel

Filter/Regulator

Lubricator
Body
Bowl (metal)
Drains
Injector meter block & brass assembly
Seals
Sight glass
Sight dome

Pneumatic

Aluminium
Aluminium
Plastic
Plastic
Nitrile
Polyamide
Polycarbonate

Body, Bonnet & Bowl


Deflector
Drains
Seals
Element
Sight glass
Piston
Knob
Spring (Poppet & Control)

59

Aluminium
Plastic
Plastic
Nitrile
Plastic
Polyamide
Plastic
Plastic
Steel

Modular
FRLs
1" Modular
FRLs

Adjustable Reset Pressure Switches

Adjustable Reset Pressure Switches


The Adjustable Reset Pressure Switch is designed to
provide a safeguard for pneumatic systems or machines,
which require a minimum operating pressure to operate
effectively. When the correct pressure is present the switch
provides a constant output signal which should be used to
operate a control valve or device to enable the system to
perform its normal function. If the operating pressure falls
below the set level, the constant output signal is cancelled,
allowing the control valve or device to stop the system in a
safe manner.
Once the pressure rises above the preset threshold, unlike
a conventional pressure switch, the Adjustable Reset
Pressure Switch must be reset before it can once again
transmit the output signal authorising operation. The reset
signal may be manual, pneumatic or electrical.
Versions are available to provide either pneumatic or
electrical output signals or both.

Electrical cable:
3-wire, 0.5mm2
length 2m

Pneumatic characteristics

Electrical characteristics

Pressure range

1,5 to 8 bar max

Electrical output

Temperature range

-100 to +550C

5A / 250V A.C.

Adjustment range

1,5 to 6 bar

5W / 48V D.C.

Precision

0,2 bar

Electrical reset = 1W

On/Off relay

Part nos. Switches

Micro-Solenoid Valve (Non-locking override)

Part no.

Description

Part no.

Description

P3E-KA11SAN

Pneumatic output, manual reset.

P2E-LV32B1

12V. D.C.

P3E-KA11SBN

Pneumatic output, reset.

P2E-LV32C1

24V. D.C.

P3E-KA11SCN

Electrical and pneumatic outputs, manual resets.

P2E-LV32D1

48V. D.C.

P3E-KA11SDN

Electrical and pneumatic outputs, pneumatic reset.

P2E-LV34B1

12V. 50/60Hz

P3E-KA11SEN

Electrical and pneumatic outputs, electrical reset

P2E-LV31C1

24V. 50Hz

P2E-LV33C1

24V. 60Hz

P2E-LV34D1

48 V. 50/60Hz

P2E-LV31F1

115V. 50Hz / 120V. 60Hz

P2E-LV31J1

230V. 50Hz / 240V. 60Hz

for pressure switch

Note: Micro-solenoid not included.


Micro-solenoid valve must be ordered separately.

See cable plugs Page 16


Pneumatic remote controlled reset

Direct pressure return

"On/Off"
indicator

ARPS with
pneumatic
output and
pneumatic
reset

Pressure return through


programmable control

Programmable controller
or other programmable
electronic control

Reset controlled
from the control
panel

Reset from control panel


on the console

Gauge
Pneumatic
push button

Pneumatic outputAdjustment
signal

Pressure taken
upstream of
the ARPS

ARPS with
electrical and
pneumatic
outputs and
with manual
or pneumatic
reset

Pneumatic reset

ARPS with
electrical and
pneumatic
outputs and
with electrical
reset

Adjusting the cut-off pressure

Electrical reset

Pneumatic output
signal
Tamper-proof
sealing plug

Electrical output signal


Adjustment by
allen key (H6)

On all ARPS, the tripping pressure is adjusted


by an allen key. Tamper proof sealing plug
prevents unauthorised adjustment.

Pneumatic

60

Electrical output signal

1" Modular FRLs

Pressure gauges

Wide range of pressure gauges


Rear entry and bottom entry options
Back pressure gauge for reclassifier-silencers
Round or square panel mounted gauges
Integrated thread sealing ring

Pressure gauges
Symbol

Description

Pressure
range,
bar

Port
size

Dial
mm

Rear entry

0-2
0-4
0-10
0-20

G1/8
G1/8
G1/8
G1/8

40
40
40
40

0,062
0,062
0,062
0,062

P3D-KAB1AYN
P3D-KAB1ALN
P3D-KAB1ANN
P3D-KAB1AHN

Rear Entry

0-4
0-11
0-14

G1/8
G1/8
G1/8

50
50
50

0,068
0,068
0,068

P6G-ERB1040
P6G-ERB1110
P6G-ERB1140

Rear entry

0-4
0-14
0-20

G1/4
G1/4
G1/4

50
50
50

0,074
0,074
0,074

P6G-ERB2040
P6G-ERB2140
P6G-ERB2200

Bottom entry

0-11

G1/8

50

0,065

P6G-EBB1110

Panel Mounted Rear Entry

0-14
0-11
0-10

G1/8
G1/8
G1/4

50
63
85

0,100
0,080
0,180

P6G-EPA1140
P6G-FPA1V10
P6G-HPA1100

Square - Panel
Mounted - Rear Entry

0-10
0-4
0-10

G1/8
G1/8
G1/8

50x50
75x75
75x75

0,100
0,200
0,190

P6G-RPA1100
P6G-TPA1040
P6G-TPA1100

Rear Entry BackPressure


(Reclassifiers)

0-2

G1/8

40

0,062

P6G-DEB1020

Panel mounting gauges


Panel mounting gauges have a threaded body and are
supplied complete with a plastic mounting collar.

Pneumatic

61

Weight
Kg

Order code

Modular
FRLs
1" Modular
FRLs
Filter Spare Kits
Model

Spares and Replacement Parts


Mini Series
P3A

Junior Series
P3D

Maxi Series
P3E

G1 Series
P3N

Manual drain kit

P3E-KA00DBN

P3E-KA00DBN

P3E-KA00DBN

P3E-KA00DBN

Semi-auto drain kit

P3A-KA00DCN

P3A-KA00DCN

P3A-KA00DCN

P3A-KA00DCN

P3E-KA00DDN

P3E-KA00DDN

Drain Kits

Auto drain kit

Bowl Kits
Poly bowl
Poly bowl with manual drain

P3A-KA00BBA

P3D-KA00BBA

P3E-KA00BBA

Poly bowl with semi-auto drain

P3A-KA00BCA

P3D-KA00BCA

P3E-KA00BCA

Poly bowl with auto drain

P3E-KA00BDA

Metal bowl
Metal bowl with manual drain

P3A-KA00BPA

P3D-KA00BKA

P3E-KA00BKA

Metal bowl with semi-auto drain

P3A-KA00BQA

P3D-KA00BLA

P3E-KA00BLA

Metal bowl with auto drain

P3E-KA00BMA

Compact metal bowl with manual drain

P3E-KA00BTA

Compact metal bowl with semi-auto drain

P3E-KA00BVA

Compact metal bowl with auto drain

P3E-KA00BWA

Filter Element Kits


5 micron element

P3A-KA00EEN

P3D-KA00EEN

P3E-KA00EEN

P3A-KA00EGN

P3D-KA00EGN

P3E-KA00EGN

P3A-KA00ECN

P3D-KA00ECN

P3E-KA00ECN

5 micron element (compact bowl)


40 micron element

P3E-KA00ERN

40 micron element (compact bowl)


Coalescing element

P3NKA00ESG

P3E-KA00ESN

Coalescing element (compact bowl)


Adsorber element

P3NKA00ESE

P3NKA00ESC

P3E-KA00EPN
P3A-KA00EAN

P3D-KA00EAN

Adsorber element (compact bowl)

P3E-KA00EAN

P3NKA00ESA

P3E-KA00ENN

Seal Kits
Poly bowl seal (10 off)

P3A-KA00RZN

P3D-KA00RWN

P3E-KA00RZN

Metal bowl seal (10 off)

P3A-KA00RZN

P3D-KA00RWN

P3E-KA00RWN

Connector O ring (10 off)

P3A-KA00CYN

P3D-KA00CYN

P3E-KA00CYN

Repair kit (self-relieving)

P3D-KA00RRN

P3E-KA00RRN

P3NKA00RR

Repair kit (non-relieving)

P3D-KA00RNN

P3E-KA00RNN

P3NKA00RN

P3E-KA00MMN

Regulator Spare Kits

Metal panel mounting ring

P3A-KA00MMN

P3A-KA00MMN

Plastic panel mounting ring (5 off)

P3A-KA00MPN

P3A-KA00MPN

Tamperproof kit

P3A-KA00ATN

P3A-KA00ATN

Pneumatic

62

P3E-KA00ATN

Spares and Replacement Parts


Model

1" Modular FRLs

Mini Series
P3A

Junior Series
P3D

Maxi Series
P3E

G1 Series
P3N

P3A-KA00EEN

P3D-KA00EFA

P3E-KA00EFA

P3NKA00ESE

Filter/Regulator Spare Kits


5 micron element
5 micron element (compact bowl)

P3E-KA00ETA

40 micron element

P3A-KA00EGN

P3D-KA00EHA

40 micron element (compact bowl)

P3E-KA00EHA

P3NKA00ESG

P3E-KA00EVA

Repair kit (self-relieving)

P3D-KA00RRN

P3E-KA00REN

P3NKA00RR

Repair kit (non-relieving)

P3D-KA00RNN

P3E-KA00RGN

P3NKA00RN

P3A-KA00ATN

P3A-KA00ATN

P3E-KA00ATN

P3A-KA00BAA

P3D-KA00BAA

P3E-KA00BAA

Tamperproof kit
For Drain Kits - see Filters on page 62
For Bowl Kits - see Filters on page 62
For Bowl Seal Kit - see Filters on page 62

Lubricator Spare Kits


Plastic bowl without drain
For Manual Drain Kits - see Filters on page 62
For Bowl Kits with Manual Drain - see Filters on page 62
For Bowl Seal Kit - see Filters on page 62

Lubrication of airlines
Satisfactory operation of airline equipment and effective lubrication depends upon the proper selection of lubrication oil. Oils having
a viscosity below ISO3448 Grade 10 to 22 will satisfy most high-speed pneumatic tools and other light duty requirements.
Heavy duty tools and pneumatic valves and cylinders will normally require oils in the viscosity ISO3448 Grade 32 to 68.
Only Paraffinic based oils can be used and the following recommendations are given as a general guide to types of oil that are
suitable for use with Parker airline equipment.

High speed tools and systems

Air Cylinders and valves

Oil Company

ISO Grade

Grade

ISO Grade

Grade

Century Oils

Century P - 198

15

P.W.L.A

32

Alexander Duckham

Zurcon 2

15

Zurcon 4 32

Gulf

Harmony 38AW

15

Harmony 43AW

32

Shell (UK) Oil

Tellus 22

22

Tellus 37

37

Burmah Castrol

Hyspin AWS15

15

Hyspin AWS32

32

Edgar Vaughan

KSO 5L

10

Hydrodrive HP100

32

Esso Petroleum

NUTO 1115

15

NUTO H32

32

B.P.

HLP 22

22

HLP 32

32

Mobile Oil Company

Velocite No.6

10

DTE Oil - Light

32

VPI-A

32

Derwent 32

32

Mobile
Silkolene

Silkair GP22

22

Silkolene

Dove 15

15

Most Parker Pneumatic valves and cylinders are designed for use in non-lube operation. However airline lubrication will increase the
service life.
Note! If oil lubrication is used, it must be maintained for the service life of the product.
Some specialised lubricants, particular synthetic reclaimed oils and low temperature additives, may contain compounds which are
incompatible with certain materials, internal O rings and seals. They may also attack plastic piping or the transparent bowls of the airline
lubricator. Attention is drawn to BS6005 (Specification for moulded transparent polycarbonate bowls used in compressed air filters and
lubricators).
Do not use oils with additives, compounds oils containing solvents, graphite, detergents or synthetic oils.

Pneumatic

63

Pneumatic

Service and Replacement Parts

P3N 1 Series
Filter Elements
Description

Kit Part Number

5 micron

P3NKA00ESE

40 micron

P3NKA00ESG

Coalescing

P3NKA00ESC

Adsorber

P3NKA00ESA

Pressure Regulator
Part Number

Pressure Gauge

P3NRA18BNL

P6G-ERB2040

P3NRA18BNN

P6G-ERB2140

P3NRA18BNH

P6G-ERB2200

P3NRA18BPP

P6G-ERB2140

Repair Kit

P3NKA00RR

Lubricator
Part Number
P3NLA18LSN
P3NLA18LSM

Repair Kit
P3NKA00RL

Drip Control Assembly Fill Cap Kit


PS740P

P3NKA00PK

www.parker.com

Pneumatic Division
Sales Offices
Austria - Wr.Neustadt
Tel: +43 2622 23501
Fax: +43 2622 66212

Norway - Langhus
Tel: +47 6491 1000
Fax: +47 6491 1090

Belgium - Nivelles
Tel: +32 067 280 900
Fax: +32 067 280 999

Poland - Warsaw
Tel: +48 22 863 49 42
Fax: +48 22 863 49 44

Czech & Slovak


Republics - Prague
Tel: +420 283 085 221
Fax: +420 283 085 360

Portugal - Lea da
Palmeira
Tel: +351 22 999 7360
Fax: +351 22 996 1527

Denmark - Ishj
Tel: +45 43 560400
Fax: +45 43 733107
Finland - Vantaa
Tel: +358 9 4767 31
Fax: +358 9 4767 3201
France - Evreux
Tel: +33 820 825 239
Fax: +33 820 029 870
Germany - Mettmann
Tel: +49 2104 137-0
Fax: +49 2104 137-500
Greece - Athens
Tel: +30 10 933 6450
Fax: +30 10 933 6451
Hungary - Budapest
Tel: +36 1 220 4155
Fax: +36 1 422 1525
Italy - Corsico, Milan
Tel: +39 02 4519 21
Fax: +39 02 4479 340
Netherlands - Oldenzaal
Tel: +31 541 585000
Fax: +31 541 585459

Parker Hannifin plc


Pneumatic Division,
Walkmill Lane, Bridgtown,
Cannock, Staffs. WS11 3LR
United Kingdom
We reserve the right to make
alterations without prior notification.
Edition YY.MM

Romania - Bucharest
Tel: +40 21 252 3382
Fax: +40 21 252 3381
Russia - Moscow
Tel: +7 095 234 0054
Fax: +7 095 234 0528
Slovenia - Novo mesto
Tel: +386 7337 6650
Fax: +386 7337 6651
Spain - Madrid
Tel: +34 91 675 7300
Fax: +34 91 675 7711
Sweden - Spnga
Tel: +46 (0) 8 5979 5000
Fax: +46 (0) 8 5979 5110
Switzerland - Biel
Tel: +41 32 3653711
Fax: +41 32 3653730
UK - Cannock
Tel: +44 1543 456000
Fax: +44 1543 456001
Ukraine - Kiev
Tel: + 380 44 220 7432
Fax: + 380 44 220 6534

You might also like