Scribd
Upload
1K views

P2P Wireless IP Camera User Manual For PC

1. This document provides instructions for installing and using a P2P wireless IP camera. 2. Setup is simplified as there is no need to configure ports, DDNS, or the router. Installation takes about one minute. 3. To add the camera, download the PC client software, search locally or enter the camera's UID to add it remotely over the internet.

Uploaded by

Henry Ezeilo
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
1K views

P2P Wireless IP Camera User Manual For PC

1. This document provides instructions for installing and using a P2P wireless IP camera. 2. Setup is simplified as there is no need to configure ports, DDNS, or the router. Installation takes about one minute. 3. To add the camera, download the PC client software, search locally or enter the camera's UID to add it remotely over the internet.

Uploaded by

Henry Ezeilo
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

P2P Wireless IP camera User Manual

PC client version 2.1

Brief Instruction:
Real Plug and Play(P2P) is brand new technology for ip camera market.
The ip cameras could be more easy to install and use.
With the p2p ip camera:
1.No need to set up port forward
2.No need to apply additional DDNS
3.No need to change routers configuration
4.No need to watch the live video stream remotely by IE link via internet.
What you need to do,its just follow our brief instruction,and all installation could
be accomplished around one minute.

1.Install the pc client for local lan and remote watch by internet.
A:Please download the pc client from our official software website:
www.netcam360.com
B:Please double click the software icon.

During the download and installation period,maybe your computer anti virus
protection system will remind you this software is not safe,please ignore it.
C:Follow the software instruction and choose the language you need.

D:Accomplish the software installation,and you will get the icon on your computer.

2.Add camera:
A:General PC client user interface

B:Add camera under Lan network situation


1.1 local area network search
*Please make sure your computer and camera are connected with the same router.
*Please click "Device Set" at the lower-left corner.
*Please click Open search tools.

*Please Click Search and you will get camera list under same lan.

*Please add the camera as you need by double click:

*The camera will be on the above list.


*You could add another or more cameras by click add too by input information
Manually.
*You also could add another or more cameras directly double click the camera list in
the search camera list
*You could modify the cameras default name by clickmodify
*You could delete the camera by clickdelete

*The cameras icon is yellow,that means its disconnect by pc client.

*Please drag the icon to right window,after connect,the icon will become green.
The camera now is online watch workable.

C:Add camera remotely by internet.


*Please click the Device set
*Please directly click the Add
*Please directly input below information:
1:UID information,you could find it from the label which is on the bottom of camera.
2:Please note:default user name is admin,no password.
and after you get the camera,please change the password for security reason a.s.a.p.
3.You could name the device as you like.
4.Other info is default setting.
*After above steps,you already add the camera.

Main Functions Of PC client:


*After the camera is online,please double click the green cameras name.

*Main function:
1.User name and password change,and user level setting:

2.Email setting:for motion detection alarm push by email

3.DDNS setting(no necessary,just for the purpose if you want to share the live stream
video by URL link quickly)

4.Alarm:You could set up the motion detection alarm as you need.

5.Wireless Setting:Please note,at the first time,if you want to set up wireless,you need
to set up wireless under wired mode with cable.after setting completed,the camera
Will restart,it will cost around one minute,then you could unplug the cable.the camera
wireless setting is completed successfully.

Other Functions:

IE version:
Actually the IE user interface is almost as same as pc client.as first use,
Please choose the mode according to your default browser and install plugin if need.

Any questions during you install and use the camera,and if you could not
find answers from this manual,please directly contact our brand re-sellers.
Distributions,or,you also could directly contact us.The below after service
Supplied by professional tech staff from 9AM-6PM,local china time.
1.Online tech support
2.Remote assistance by team viewer
3.RMA policy,please directly contact the seller.
4.Your email will be replied within 24 hours since email sent.

You also could call our overseas brand re-sellers for help.

Hereby,Hope you enjoy our cameras and smart home products.


Any feedback,we will appreciated.
We hope you could join us,and help us make our products be
More easy use and better.

You might also like