Scribd
Upload
864 views

Oil Gas Field Development

The document outlines the main steps of an oil or gas field development project which are discovery, evaluation, development, production, and abandonment. It describes key activities at each step such as seismic surveys, drilling exploration and appraisal wells, reservoir modeling, field design, production operations over 15-30 years, and site restoration upon abandonment.

Uploaded by

Martin Guerrero
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
864 views

Oil Gas Field Development

The document outlines the main steps of an oil or gas field development project which are discovery, evaluation, development, production, and abandonment. It describes key activities at each step such as seismic surveys, drilling exploration and appraisal wells, reservoir modeling, field design, production operations over 15-30 years, and site restoration upon abandonment.

Uploaded by

Martin Guerrero
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

IFP SCHOOL

THE GRADUATE SCHOOL FOR ENERGY AND TRANSPORTATION PROFESSIONS

What are the main steps of an


oil or gas field development
project?
hydrocarbon field has a long life cycle:
From the discovery of a petroleum deposit to the first oil/gas, exploration and production activities are
spread over several decades. Five main steps can be distinguished in the life of an oil or gas field:

The amount of
reserves?

The production
facilities design
and
implementation

Oil and gas


production

Where is
the field?

1
DISCOVERY

2
EVALUATION

3
DEVELOPMENT

1-5 years

EXPLORATION
5-10 years

4
PRODUCTION

Site
restitution

ABANDONMENT

15-30 years

PRODUCTION
15-30 years
Sea level

1 | Field discovery
>>oil and gas are trapped in reservoir rocks buried underground (on shore/ off shore),

Depth

EXPLORATION AND EVALUATION


Sea bed
Geological
layers

Oil field

>>to locate hydrocarbon accumulation, geoscientists analyze images of the earths


subsurface produced by seismic echography. They build a model of geological layering
of the subsurface, and then identify potential reservoirs called prospects,
>>exploration wells need to be drilled to check if the identified prospect does indeed
contain hydrocarbons. These wells are typically several kilometers deep.

3D cross section of geological


layers showing a reservoir
confirmed by a well.

2 | Field evaluation
Platform

Once discovery has been confirmed, 3D numerical reservoir simulation models are built:
>>to estimate the initial volume of oil and gas in the reservoir,

Oil volume

>>to simulate the reservoir fluid flow behavior and optimize the field development scenario
(number, type and location of wells, level of field production, etc).
Appraisal wells are drilled to improve the field description through further data acquisition.
Reservoir model showing oil in
place and where appraisal wells
need to be drilled.

An economic assessment is performed taking into account revenue


according to production forecasts and the estimated development costs.
If the required economic criteria are met, the field is developed and then
produced.

OIL & GAS PRODUCTION


3 | Field development
A field development plan establishes the following:
>> the number of wells to be drilled to reach production objectives,
>> the recovery techniques to be used to extract the fluids within the reservoir,
>> the type and cost of installations, such as platforms, depending on the marine
environment (tides, storms, waves, winds, corrosion, ),
>> the separation systems for gas and fluids,
>> the treatment systems needed to preserve the environment.
An offshore production platform. Its construction
represents 2 to 3 years of work for thousands of
workers.

N.B.

Rotary drilling is the most widespread drilling technique and has been constantly
upgraded: deviated wells, horizontal wells and, more recently, multi- drain wells. Those
new technologies allow to mitigate the surface foot print of the project and to increase
well productivity.

4 | Field production
The time period over which hydrocarbons may be extracted varies between 15 to 30 years
and may be extended up to 50 years or more for giant fields.
The lifetime of a reservoir is composed of different successive phases:
> a period of production increase,
> a stabilization phase or plateau,
>> injection phases (water, gas or chemical products) to assist the hydrocarbon
recovery and thus maintain a satisfactory volume of produced resources,
>> the depletion period when hydrocarbon production declines progressively.

Significant t echnological d evelopments h ave b een r ecently m ade i n e xploration and


production deep offshore (more than 1000 m water depth). Many wells have already been
drilled in this range of depth but producing deep offshore fields r emains particularly
complex and expensive and still represents, today, a technological challenge.

An offshore floating production system: the well-heads


are fixed to the sea-bed and are connected to the ships
through production flexible tubulars.

5 | Field abandonment
When the hydrocarbon production rate becomes non economical, the reservoir is
abandoned.
Before abandoning the field, the oil companies:
> dismantle facilities such as platforms,
> put the well in a safe state,
> preserve the fields residual hydrocarbon reserves of the field, >
clean, depollute and rehabilitate the site.
Example of a petroleum platform rehabilitation,
transformed into a floating luxury hotel in Malaysia
For more information:

IFP School
228-232, avenue Napolon Bonaparte

Useful link:

www.ifpenergiesnouvelles.fr/espace-decouverte/les-cles-pour-comprendre/les-

www.ifp-school.com

sources-d-energie/le-petrole

Document printed on 100% FSC-certified paper, partially recycled in a printing plant with the Imprim'Vert printing
label. CREAV Communication - IFP School, October 2014.

Deep offshore

You might also like