Scribd
Upload
1K views

PT ASNT Levels I II III Questions Answers 27

pt question

Uploaded by

Anonymous gFcnQ4go
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
1K views

PT ASNT Levels I II III Questions Answers 27

pt question

Uploaded by

Anonymous gFcnQ4go
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 2
Liquid Penetrant Testing Method, Level II Level II Answers Liquid Penetrant Testing Method Seenavasene "1 12. 13, 14, 15. 16. 17 18, 19, 20. ¢ > 58 2a a 59. 22. a b 60. a 2. ¢ © 61. a med a 2 d 2. ¢ d Bb 2%. a > 64. c 7 a 6. ob 2c b 66. ¢ 2%. a d 67. a 30. d 4 68. a 3c b 0. 32. d e 1. a 3. Ob b mb 34.0 a c Rd 35. d a 36. ¢ e 37. a b 38d a 27 55, 56, 31, 58. Developing powder should always be: 39, a, highly Muorescent ». applied wet «, colorless 4. evenly applied ly app ~ When viewing parts, uorescent background may indicate: poor washing b. insufficient emulsifying time (postemulsification method) «. porous material and coating 4. improper cleaning before penetrant cycle «. all of the above 32.33 In the absence of a written acceptance criteria, rejection or acceptance of parts should be based 61. on the: 4. inspector's education '. design of the part and its intended application ©. appropriate penetrant standard 4d. selection of the penetrant Daa ‘When improper processing causes inspection difficulties, what should the inspector do? a a. swab parts with a solvent bs. use a correct bleedback procedure «erase nonrelevant fluorescence: .reprocess the part processes paia2 Which of the following is most likely to render the postemulsification test ineffective? a. the penetrant time is too Tong, the developing time is to long ¢. the emulsifying time is too long 4. none of the above D.28-32 23 Liquid Penetrant Testing Method, Level II ry developer should be applied: 4. so that a heavy coat of developer covers all surfaces b. so that a Tight dusting covers all surfaces to be inspected . with a dry paint brush d. by dipping pas Which factor would apply in determining the dwell time required for the penetrant to be effective? 1. type of discontinuity sought ©. shape of part «size of part 4. surface roughness 26-32 ‘The partisan aluminum forging. Description — the indication is sharp, halimoon shaped, not deep. Ibis called: a. alap b. centerline porosity a heat treat crack 4. false indication Dat ‘The part is a 13 mm (0.5 in.) thick aluminum plate with « V weld. Description — the indication ‘appears in an area that is somewhat dish shaped. ‘The indication extends out from the center in a spoke formation. The indication is: 1. shrinkage », nonrelevant cc. aquench crack 4. a crater crack Dat

You might also like