Scribd
Upload
217 views3 pages

FLR D

This document provides information on FLR Series flow meters for process control. The flow meters can accurately measure the flow of liquids and gases, providing outputs of flow rate and total flow. They are rugged sensors that can be installed in pipes of various sizes in any orientation. The flow meters offer adjustable settings to compensate for properties of different fluids and operating conditions. Specifications include operating temperature and pressure ranges, power requirements, accuracy levels, and enclosure construction materials. Dimensions and ordering information is also provided for selecting a flow meter based on the required flow range and medium.

Uploaded by

Charly Columb
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
217 views3 pages

FLR D

This document provides information on FLR Series flow meters for process control. The flow meters can accurately measure the flow of liquids and gases, providing outputs of flow rate and total flow. They are rugged sensors that can be installed in pipes of various sizes in any orientation. The flow meters offer adjustable settings to compensate for properties of different fluids and operating conditions. Specifications include operating temperature and pressure ranges, power requirements, accuracy levels, and enclosure construction materials. Dimensions and ordering information is also provided for selecting a flow meter based on the required flow range and medium.

Uploaded by

Charly Columb
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

FL0W METER PROCESS CONTROL

INFORMATION SYSTEMS
FLR Series

B2

Optional

FLR Flow Sensors


U 2% FS Accuracy
U No Straight Pipe
Run Required
U Mounts in Any Position
U 4 to 20 mA,
0 to 5 Vdc, and
0 to 10 Vdc
Standard Outputs
U Digital Flow Rate
and Total
Flow Indicator
U In-Field
Compensation for:
Specific Gravity
of All Fluids
 Viscosity of
Petroleum-Based Fluids
 Specific Gravity,
Pressure, and
Temperature of
Pneumatic Applications

FLR7330D shown
smaller than actual size.

Rugged In-Line Flow Sensors


Available in 13 mm (12"), 19 mm (34"), and 32 mm
(114") sizes with anodized aluminum or brass. Comes
with 4.5 m (15') of stripped end integral cable. In the
field, integral cable can be extended up to 300 m
(1000') with shielded copper cable. Units are securely

protected in a sturdy cast aluminum enclosure, and


are easy to install and mount in any position, vertical
or horizontal. Capable of monitoring fluids to 150 GPM
or pneumatic lines to 1000 SCFM.
B-67a

Specifications

Temperature Range:
-29 to 116C (-20 to 240F)
Maximum Pressure: 3500 psig
(liquids); 1000 psig (gases)
Power Requirement:

0 to 5 Vdc Output: 10 to 30 Vdc @
0.75 W maximum

0 to 10 Vdc Output: 12 to 30 Vdc @
0.75 W maximum

4 to 20 mA Output: Loop-powered,
30 Vdc maximum
Power Consumption: 25 mA maximum
Circuit Protection:
Reverse polarity and current limit
Repeatability: 0.5%
Non-Linearity: 0.05%
Isolation: Inherently isolated from
the piping system
Display: Fixed or toggle modes of
operation for rate and totalizer display.
8-digit, 0.70" high numeric display
for rate and total 8-digit 0.35" high
alphanumeric display for units
and setup
Response Time: 1.0 sec
Temperature Drift:
0.05% of span per C maximum

Analog Outputs:
4 to 20 mA into 1K maximum
0 to 5 Vdc into 10K minimum
0 to 10 Vdc into 10K minimum
User Connections:
15' pig-tail (standard)
Transmission Distance:
4 to 20 mA limited by cable resistance
0 to 5 Vdc 300 m (1000') maximum
0 to 10 Vdc 300 m (1000') maximum

Enclosure:

Material: Anodized and epoxy


powder-coated aluminum with
polycarbonate lens
Seals: Silicone gasket between
enclosure and lens/cover FKM
O-rings between enclosure and
flow meter body
Connection: 4-pin connection
(standard)
Fasteners: T303 SS
Rating: NEMA 12 and 13 (IP52/54)
Materials:
2024 - T351 anodized aluminum
body, piston and cone C360 brass
body, piston and cone petroleum (oil)
common parts

Spider Plate: T316 SS


Spring: T302 SS
Fasteners: T303 SS
Pressure Seals: FKM
Lens: Polycarbonate
Retaining Ring: SAE 1070/1090
carbon steel
Retaining Spring: SAE 1070/1090
carbon steel
Internal Magnet: PPS/ceramic
Enclosure Seal: Silicone gasket
water-based, water, air
common parts
Spider Plate: T316 SS
Spring: T302 SS
Fasteners: T303 SS
Pressure Seals: FKM
Lens: Polycarbonate
Retaining Ring: T316 SS
Retaining Spring: ST316 SS
Internal Magnet: PPS/ceramic
Enclosure Seal: Silicone gasket

Dimensions: mm (inch)
B C D E F G H I J K
Nominal
Port Size Length
Length Length
Width
Width
Width
Width
Depth
Offset Hole Dia.


168
134
163
152
82
76
107
75
38
8

(SAE 6) (6.60) (5.27) (6.41) (6.00) (3.23) (3.00) (4.20) (2.94) (1.51) (0.31)

168 134 163 152 82 76 107 75 38 8

(SAE 10) (6.60) (5.27) (6.41) (6.00) (3.23) (3.00) (4.20) (2.94) (1.51) (0.31)

183 134 179 152 91 76 107 75 32 8

(SAE 12) (7.20) (5.27) (7.04) (6.00) (3.60) (3.00) (4.20) (2.94) (1.27) (0.31)
1
183
134 179 152
91 76 107 75 32
8

(SAE 16) (7.20) (5.27) (7.04) (6.00) (3.60) (3.00) (4.20) (2.94) (1.27) (0.31)
1 310 271 296 194 123 97 128 114 56 8

(SAE 20) (12.20) (10.68) (11.65) (7.63) (4.84) (3.82) (5.02) (4.50) (2.20) (0.31)
1 310 271 296 194 123 97 128 114 56 8

(SAE 24) (12.20) (10.68) (11.65) (7.63) (4.84) (3.82) (5.02) (4.50) (2.20) (0.31)

B-67b

All shown smaller than actual size.

FLR9110D

FLR7130D
FLR6305D

B2

To Order




























Model No.
FLR6102D
FLR6105D
FLR6115D
FLR7120D
FLR7130D
FLR8140D
FLR8150D
FLR9175D
FLR9110D
FLR9115D
FLR6302D
FLR6305D
FLR6315D
FLR7320D
FLR7330D
FLR8340D
FLR8350D
FLR9375D
FLR9310D
FLR9315D
FLR6725D
FLR6750D
FLR7710D
FLR7715D
FLR8725D
FLR9740D
FLR9760D
FLR9710D

Flow Range
0.2 to 2.0 GPM
0.5 to 5.0 GPM
1 to 15 GPM
0.2 to 2.0 GPM
3 to 30 GPM
4 to 40 GPM
5 to 50 GPM
10 to 75 GPM
10 to 100 GPM
10 to 150 GPM
0.2 to 2.0 GPM
0.5 to 5.0 GPM
1 to 15 GPM
2 to 20 GPM
3 to 30 GPM
4 to 40 GPM
5 to 50 GPM
10 to 75 GPM
10 to 100 GPM
10 to 150 GPM
2 to 25 SCFM
5 to 50 SCFM
10 to 100 SCFM
15 to 150 SCFM
25 to 250 SCFM
25 to 400 SCFM
50 to 600 SCFM
100 to 1000 SCFM

Medium
Oil
Oil
Oil
Oil
Oil
Oil
Oil
Oil
Oil
Oil
Water
Water
Water
Water
Water
Water
Water
Water
Water
Water
Air 100 psi
Air 100 psi
Air 100 psi
Air 100 psi
Air 100 psi
Air 100 psi
Air 100 psi
Air 100 psi

NPT
Body
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
1
Aluminum
1
Aluminum
1 Aluminum
1 Aluminum
1 Aluminum
Brass
Brass
Brass
Brass
Brass
1
Brass
1
Brass
1 Brass
1 Brass
1 Brass
Aluminum
Aluminum
Aluminum
Aluminum
1
Aluminum
1 Aluminum
1 Aluminum
1 Aluminum

Comes complete with operators manual.


For 5-point NIST certificate add -NIST5 to model number for additional cost.
For British standard pipe thread parallel add -BSPP to model number, no additional cost.
Ordering Examples: FLR6105D, flow transmitter, 0.5 to 5.0 GPM for oil, with analog output FLR5101D, flow transmitter, 0.1 to 1.0 GPM for oil
with analog output.

B-67c

You might also like