Scribd
Upload
102 views2 pages

CMG-DM24: 3 To 12 Channel Broadband Digitisers

The CMG-DM24 is a high-quality digitizer from Guralp Systems for broadband seismic data recording. It can record 3 to 12 channels of data at 24-bit resolution and features low power consumption, multiple data storage and transmission options, integrated GPS for precise timing, and remote control and calibration of Guralp sensors. The digitizer provides high dynamic range, low noise, and flexible sampling rates up to 1000 samples per second.

Uploaded by

Pangestu Wibisono
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
102 views2 pages

CMG-DM24: 3 To 12 Channel Broadband Digitisers

The CMG-DM24 is a high-quality digitizer from Guralp Systems for broadband seismic data recording. It can record 3 to 12 channels of data at 24-bit resolution and features low power consumption, multiple data storage and transmission options, integrated GPS for precise timing, and remote control and calibration of Guralp sensors. The digitizer provides high dynamic range, low noise, and flexible sampling rates up to 1000 samples per second.

Uploaded by

Pangestu Wibisono
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

CMG-DM24

3 to 12 channel broadband digitisers


The Gralp Systems CMG-DM24 is a high-quality digitiser with full 24bit resolution, designed for data quality and durability with models
available for 3, 6, 9, or 12 channel recording.

Key Features:
4 low-noise 24-bit ADCs (expandable to 7, 14)
Fourth channel for user signals and calibration
8 environmental channels with 20-bit resolution (3
mass position, 5 user)
Low power 32-bit DSP and ARM processor (<1W
recording 4 channels at 100 sps)
Multiple concurrent data rates, up to 1000 sps
STA/LTA, level, external and software triggering
Simultaneous output of triggered and continuous
streams
Event selection and download over data port
Full control of Gralp broadband sensors including
remote lock, unlock and centre
Calibration using on-board sinewave, impulse or
broadband signal generators
Remotely configurable using Gralp data modules
and software
UTC time-stamped data using low power GPS
Up to 8 Gb Flash storage (64 Mb standard)
USB Flash drive memory storage option
Optional LCD panel with status information
Optional FireWire interface for external disk storage
Ethernet and USB interface options
Multiple storage and transmission modes
Built-in modem support
Available in surface, borehole and integrated
packages or as a retro-fit to existing sensors for
instant digital seismic stations

GRALP SYSTEMS LTD | W: guralp.com | T: +44 118 981 9056 | E: [email protected] | Seismology | Energy | Civil Engineering | Security

Specifications
CMG-DM24

Signal channels
Auxiliary / calibration channels
Input voltage range (surface)
Input impedance (surface)
Input impedance (cylindrical)
Inputs (borehole and integrated)
Environmental channels
Environmental channel range
ADC converter type
Output format
Dynamic range
Absolute accuracy
Common-mode rejection

3, 6, 9, 12 @ 24 bits
1, 1, 2, 2 @ 24 bits
10 V (20 V optional) differential
33 k / 10 nF
113 k / 10 nF
Matched to sensor
8 @ 4 samples/s, 16-bit resolution
10 V single-ended
5th-order single-bit low pass -
24-bit (32-bit low-noise option)
137dB (141dB) @ 40 samples/s
0.5% (0.1 %)
120 dB @ 10 Hz

DSP sampling rate


Output rates available
Highest output capability

32 kHz
1000 .. 1 samples/s
3 channel: 3 1000 + 1 500
6 channel: 3 1000 + 4 500
2, 4, 5, 24, 25
3-pole
FIR (other options available)
140 dB
140 dB
STA/LTA, level, external, software

Decimation filters
Anti-alias filters
Low pass filters
Out-of-band rejection
In-band ripple
DSP trigger modes
Timing source precision
Optional precision RTC
Calibration signal generator
Flash storage
Sensor control commands
Optional smart sensor interface
Operating temperature
Power supply
Current at 12 V DC

-7

8 10
-8
1.7 10 (30 mW power cost)
Amplitude/frequency adjustable
sine wave, step or broadband noise
64 Mb (options to 8 Gb), external flash
memory stick option
Remote lock, unlock, centre
2
SSI I C/1-wire interface
40 to +60 C
10 28 V DC
3 channel: 77 mA = 0.92 W
6 channel: 120 mA = 1.44 W
GPS: 35 mA = 0.42 W

GRALP SYSTEMS LTD | W: guralp.com | T: +44 118 981 9056 | E: [email protected] | Seismology | Energy | Civil Engineering | Security
DAS-D24-0004 Issue I

You might also like