®

Handler 187 217920

230 VAC, Single-Phase Wire Welding Package Feb. 2010

Ranked Best in its Class by .030 –.035 in. (0.8 – 0.9 mm). Seven output voltage
Weld Talk Forum Experts settings with wire feed tracking make the unit easy
to set and adjust for different materials, thicknesses
7 Voltage Selections for Finer
and wires. Supplied with a sample spool of wire and
Control with Improved Performance adaptable for using 4 or 8 in. (102 or 203 mm) spools.
PROCESSES Comes complete with:
MIG (GMAW) Rugged constant-voltage DC welder power source
Welding Durable built-in wire feeder
Built-in gas solenoid valve
Flux Cored (FCAW) Dual-gauge regulator and gas hose
Welding Comfortable 10 ft. (3 m) H10 MIG torch
10 ft. (3 m) work lead with clamp
Spare .030 in. (0.8 mm) contact tips
B uilt with Hobart quality and durability, the Handler
187 is a wire welding package with industrial
performance capable of operating on 230/240 volt
Sample spool of .030 in. (0.8 mm) self-shielded
flux cored welding wire
circuits. The broad output range of 25 –185 amps Weld set-up and information chart
allows you to weld 24 gauge up to 5/16 inch steel. Power cord with plug
It is also capable of running the following wires: mild
Owner’s Manual with parts lists, installation,
steel or stainless steel .023 –.035 in. (0.6 – 0.9 mm),
operation, maintenance and MIG welding guidelines
flux cored .030 –.045 in. (0.8 –1.2 mm), aluminum

FEATURES BENEFITS
7 voltage selections, enhanced Offers easier fine control of the output parameters for improved arc performance with less spatter for a better bead
magnetics and infinite wire feed appearance and less clean up.
speed control
Door chart with initial settings Quickly reference initial settings for different wires, gases, materials and thicknesses. Provides quick starting point for
novices and professionals alike.
Proven built-in wire feeder with Provides positive feed with adjustable tension. Easy access for threading wire.
quick-release tension lever
Replaceable, built-in contactor Eases use and excellent safety feature which makes wire electrically “cold” when not welding.
Convenient polarity changeover with Access makes it quick and easy to change polarity for solid or tubular wire. Includes convenient storage holes for
tip holder spare tips.
Quick-change, dual-groove drive roll Easy to change from one wire size to another .023/.025 in. (0.6 mm) or .030 –.035 in. (0.8 – 0.9 mm).
Short circuit protection Protects unit against current overload.
Self-resetting thermal overload Protects power transformer to ensure reliability.
Solid-state motor protection Protects wire feed system from overload, no fuses to change or circuit breaker buttons to reset.
Hobart’s 5/3/1 Industrial Warranty Five-year warranty on transformer and stabilizer; three years on electronics (drive motors, rectifiers); and one year on
AND Technical Assistance MIG torch. AND Worldwide Service Network and 1-800-332-3281 Tech Help Line for prompt service and assistance.

SPECIFICATIONS (SUBJECT TO CHANGE WITHOUT NOTICE.) INDUSTRIAL

Current Max. Open Wire Feed Amps Input at Rated Load, 60 Hz Net Shipping
Rated Output Range Circuit Voltage Speed Range 230 V KVA KW Dimensions Weight Weight
130 A, 21.5 VDC at 25 – 185 A 31 V 40 – 700 IPM, 20.5 4.7 3.88 H: 12-3/8 in. (315 mm) 68 lb. 78 lb.
30% Duty Cycle on 60 Hz, 50 – 740 IPM W: 10-5/8 in. (270 mm) (31 kg) (35.5 kg)
20% Duty Cycle at 50 Hz at no load D: 19-1/2 in. (495 mm)

Certified by Canadian Standards Association to both Canadian and U.S. Standards.

Hobart Welders An Illinois Tool Works Company Web Site HobartWelders.com

Hobart Retail Sales Phone 800-626-9420 FAX 800-424-1544
U.S. Distributor Sales Phone 920-735-4576 FAX 800-637-2315
Canadian Sales Phone 888-489-9353 FAX 519-421-0480
International Sales Phone 920-735-4509 FAX 920-735-4125
 HANDLER 187 WELDING GUIDE
Settings are approximate. Adjust as required. Thicker materials can be Recommended Voltage and Wire Speed Settings for thickness of metal being welded.
welded using proper technique, joint preperation and multiple passes. Number on left of slash is Voltage Setting/Number on right of slash is Wire Feed Setting.

CFH

Flux Cored ~ 1/35 1/40 2/40 4/60 5/40 6/40* ~

E71T-11 Good for windy or ~ 1/30 1/35 2/40 3/50 5/50 6/60 7/60*
“Set Polarity outdoor applications
for (DCEN)” ~ ~ ~ 1/25 3/30 4/35 5/35 6/35*

1/30 2/40 3/50 4/60 5/80 6/90 ~ ~

Solid Wire
ER70S-6 ~ 1/40 2/50 3/50 5/60 6/60 6/70* 7/80*
“Set Polarity Produces less spatter.
for (DCEP)” Better appearance
~ 3/40 4/40 5/40 5/50 6/50 7/50* 7/60*

~ ~ 3/35 5/40 5/60 6/80 7/90* ~

Solid Wire
ER70S-6 ~ ~ 4/40 5/40 5/50 6/50 7/50* 7/50*
“Set Polarity
for (DCEP)” ~ ~ 3/25 4/25 5/40 6/40 7/40* 7/40*

~ 3/40 3/40 4/50 6/60 7/70 ~ ~

Stainless
Steel
~ 3/30 3/35 4/30 5/35 6/50 7/50* ~
“Set Polarity
for (DCEP)”
~ 3/15 3/35 4/30 5/40 7/40 7/50*
~

Aluminum** ~ ~ ~ 2/90 6/90 7/90 ~ ~

“Set Polarity
for (DCEP)” ~ ~ ~ 2/100 6/90 7/90 ~ ~

Match feedroll groove to diameter of wire being used. Set Tension Knob CAUTION! Do not change Voltage switch position while Wire Speed listed is a starting value only. Wire Speed setting can be fine-tuned while welding.
Setting to 3 at start. Adjust tension per instructions in the manual. welding. See owners manual for more information Wire Speed also depends on other variables such as stick out, travel speed, weld angle, cleanliness
of metal, etc.
*Multiple passes required. **Aluminum wire is soft so feedability is not as good. Make sure that hub tension is not too tight and
keep the as torch straight as possible. A “push angle” for the torch is recommended.

CONTROL PANEL
1
ON

OFF

WIRE FEED POWER

1. Wire Speed Control
3
4
5 2. Voltage Switch
2 6
3. Power Switch
Handler 187 ®

1 7 DO NOT SWITCH
WHILE WELDING
NE PAS CHANGER
2 DE PROCÉDÉ

MADE IN
V
VOLTAGE

PERFORMANCE DATA
DUTY CYCLE VOLT/AMP CURVE
200 30
180
130
OUTPUT AMPERES

100 25
80
60 20
VOLTAGE

6 7
5
40 4
15 3
1 2

20 10

5
10
10 20 30 40 50 60 70 80 100
0
DUTY CYCLE % 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200
AMPERAGE

2
 OPTIONS/ACCESSORIES

Drive Rolls
Dual-Groove, V-Smooth #237338
For .023/.025 in. (0.6 mm) and .030 –.035 in.
(0.8 –0.9 mm) wire.
Spool Gun 3035-20 #300143
Small Running Gear/Cylinder Rack #194776 Comes Complete With: Dual-Groove, V-Knurled #202926
Durable construction. For gas cylinders no 20 ft. (6.1 m) cable and gas hose For .030 –.035 in. (0.8 – 0.9 mm) and .045 in.
larger than 7 in. (178 mm) diameter, maximum Threaded nozzle and contact tips (1.2 mm) flux cored wire.
weight 75 lb. (34 kg). Spool gun conversion kit consisting of
Purchase #500527 and receive the Handler 187 control switch and gas diverter valve Contact Tips
and #194776 cart packaged together. Enclosed wire spool compartment with (See chart on below)
internal spool hub tension adjustment
for 4 in. (102 mm) rolls of wire
MIG Nozzle
For .030 –.035 in. (0.8 – 0.9 mm) aluminum,
(See chart below)
steel and stainless steel
Protects tip adapter and
Rated 150 amps, 60% duty cycle.
focuses gas coverage.

Gasless Flux Cored Nozzle

(See chart below)
For use with self-shielding
Running Gear/Cylinder Rack #770187 flux cored wires. Improves
Heavy-duty construction. For gas cylinders no visibility, eases access in
SGA 100 Spool Gun Control #043856 tight corners, protects tip adapter/gas diffuser
larger than 7 in. (178 mm) diameter, maximum
Required to connect spool gun to the from spatter and from shorting to the work piece.
weight 100 lb. (45 kg).
Handler® 135, 140, 175, 180 or 187. Allows Usable with H9, H10, H14, M10, and M15 torches.
you to connect a spool gun to virtually any
similar MIG welder — Hobart or other brands.
Includes 10 ft. (3 m) 115 VAC power cable Tip Adapter
and plug, 6 ft. (1.8 m) interconnecting cable, (See chart below)
and 5 ft. (1.5 m) gas hose.

H100S2-10 Replacement MIG Torch

Protective Cover #195186 #245924 Replacement Liners
Weather-resistant nylon resists stains and For .030 –.035 in. (0.8 – 0.9 mm) wire. (See chart below)
mildew, and protects the finish of your welder. Includes 10 ft. (3 m) cable.

CONSUMABLES
Item Hobart Package Part #* Miller Package Part #**
Contact Tips
.023/.025 in. (0.6 mm) #770174 (5 per package) #087 299 (10 per package)
.030 in. (0.8 mm) #770177 (5 per package) #000 067 (10 per package)
.035 in. (0.9 mm) #770180 (5 per package) #000 068 (10 per package)
.045 in. (1.2 mm) #770183 (5 per package) #000 069 (10 per package)

MIG Nozzle (Standard) #770404 #169 715

Gasless Flux Cored Nozzle #770487 #226 190
Tip Adapter #770402 #169 716

Replacement Liners
.023/.025 in. (0.6 mm) #196139 #194 010
.030/.035 in. (0.8/0.9 mm) #196139 #194 011
.035/.045 in. (0.9/1.2 mm) #196140 #194 012
*Available at farm and tool supply retailers.
**Available at Hobart/Miller welding distributors.

3
 TYPICAL INSTALLATION FOR SPOOL GUN TO WELDER REQUIRING AN SGA SPOOL GUN ADAPTER

For Handler® 187, combine Spool Gun 3035-20 with Gas Hose to Gas Regulator
SGA 100 to weld 14 gauge to 3/16 in. thick aluminum.
115 VAC Power Cord
Spool Gun Trigger Spool Gun
To weld aluminum with comparable, competitive
Control Cord
power sources, the spool gun may also be used with SGA 100
the SGA unit. Control Box
Spool Gun Gas Hose
Note: Refer to SGA Owner’s Manual for complete Typical MIG welder
installation instructions. Interconnecting Cord
Spool Gun Weld Cable

ORDERING INFORMATION AND SYSTEM CHECKLIST

Equipment and Options Stock No. Description Qty. Price

Handler® 187 #500525 230/240 VAC, 60 Hz with gas valve, regulator and hose
UPC: #715959355681; Shipping Weight: 78 lb. (35.5 kg); Carton Dimensions: 24 x 13-3/8 x 19 in. (610 x 340 x 483 mm);
Pallet Qty: 12; Pallet Dimensions: 48 x 40 x 43 in. (1219 x 1016 x 1080 mm); Pallet Weight: 966 lb. (439 kg)

Handler 187 with small running #500527 230/240 VAC, 60 Hz with gas valve, regulator and hose
gear/cylinder rack Packaged with #194776 cart
UPC: #7715959366151; Shipping Weight: 104 lb. (47.3 kg); Carton Dimensions: 31-1/2 x 16-1/2 x 15-1/2 in.
(800 x 419 x 394 mm); Pallet Qty: 6; Pallet Dimensions: 34 x 34 x 48-1/2 in. (864 x 864 x 1232 mm)

Accessories
Small Running Gear/Cylinder Rack #194776
Running Gear/Cylinder Rack #770187
Protective Cover #195186
Spool Gun 3035-20 #300143 Includes 20 ft. (6.1 m) cable
SGA 100 Spool Gun Control #043856
H100S2-10 MIG Torch #245924* 10 ft. (3 m), .030 –.035 in. (0.8 – 0.9 mm)
Dual-Groove Drive Rolls #237338* V-Smooth 023/.025 in. (0.6 mm) and
.030 –.035 in. (0.8 – 0.9 mm)
#202926 V-Knurled .030 –.035 in. (0.8 – 0.9 mm) and
.045 in. (1.2 mm)
Contact Tips See chart on page 3
Nozzles See chart on page 3
Tip Adapter See chart on page 3
Replacement Liners See chart on page 3
Other
Date: Total Quoted Price:

*Standard with Unit

DISTRIBUTED BY:

Litho in USA