Scribd
Upload
99 views

DMFC

Direct methanol fuel cells (DMFCs) have the potential to be a viable power source without the need for hydrogen storage if their power density, efficiency, and fuel utilization can be improved while lowering costs. Two key challenges are reducing the amount of platinum catalyst used while maintaining high power output, and preventing methanol from permeating the membrane and reducing performance. Work so far has reduced platinum loading over ten-fold while only slightly reducing power output. DMFCs could be used for portable power applications without needing purified fuel and offer advantages over hydrogen fuel cells like simpler design and eliminating fuel reforming. Further research aims to lower platinum use further and improve durability through larger fuel cell stacks.

Uploaded by

Phu Tran
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
99 views

DMFC

Direct methanol fuel cells (DMFCs) have the potential to be a viable power source without the need for hydrogen storage if their power density, efficiency, and fuel utilization can be improved while lowering costs. Two key challenges are reducing the amount of platinum catalyst used while maintaining high power output, and preventing methanol from permeating the membrane and reducing performance. Work so far has reduced platinum loading over ten-fold while only slightly reducing power output. DMFCs could be used for portable power applications without needing purified fuel and offer advantages over hydrogen fuel cells like simpler design and eliminating fuel reforming. Further research aims to lower platinum use further and improve durability through larger fuel cell stacks.

Uploaded by

Phu Tran
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Technical advances improve the

potential for a fuel cell which


eliminates the need to store or
generate hydrogen
Challenge

Direct
Methanol
Fuel Cell

Direct Methanol Fuel Cells (DMFCs) can


be a viable power source in many
applications if their power density,
energy conversion efficiency, and fuel
utilization can be increased, while also
reducing their cost. To realize these
improvements, two critical challenges
must be resolved: (1) lowering the
required amount, or loading, of
platinum catalyst while achieving a high
current (power density) level, and (2)
eliminating the crossover of methanol
through the membrane, a process that
decreases the air cathodes performance
and wastes fuel.

Technology
Description

Contacts
JoAnn Milliken
Manager, Fuel Cells R&D
202-586-2480
202-586-9811 fax
[email protected]
Robert Nowak
DARPA
703-696-7491
703-696-3999 fax
[email protected]
Piotr Zelenay
Los Alamos National
Laboratory
505-667-0197
505-665-4292 fax
[email protected]

April 2001

Similar to polymer electrolyte membrane (PEM)


fuel cells powered directly by hydrogen or
by reformate (hydrogen-rich gas produced
by reforming liquid fuels), in DMFCs oxygen
from the surrounding air is reduced at the
cathode, but liquid methanol, instead of
hydrogen, is the fuel oxidized directly at the
anode. Therefore a DMFC system does not
require a hydrogen storage tank or reformer,
which is why DMFC systems could be an
attractive alternative to direct hydrogen or
reformate systems.

Accomplishments
Work on DMFC designs has focused on the
tradeoff between reducing platinum catalyst
loading and peak power. Platinum catalyst
loadings have been reduced by over a factor
of ten, with only a 30% reduction in peak
power. For example, at a platinum loading of
2 g Pt/kW, a peak power level of 0.12 W/cm2
was demonstrated.

30-cell 45-cm2 direct methanol fuel cell stack.


New hardware developed and used in a
30-cell fuel stack with a 50-cm2 cross-sectional
area produced 80 W of power at near
ambient operating temperature and pressure.
The projected output power at higher
operating conditions (90 C and 30 psig)
is 200 W.
A DMFC system was successfully operated
using factory-grade methanol without further
purification. This indicates that special fuel cell
grade fuel will not be required for DMFCs.

Benefits
A Direct Methanol Fuel Cell offers a number of
advantages, including:
Using a liquid fuel for power.
A simpler system design, with the potential
for low-volume, lightweight packaging.
Eliminating the requirement for fuel
reforming and/or onboard hydrogen
storage.
Classification as a zero-emission power
system.

http://www.ott.doe.gov/success.html

Commercialization
Motorola and Los Alamos National Laboratory (LANL) collaborated in establishing a DMFC
Research Center at LANL to develop DMFCs for portable power applications, such as cellular
phones and laptop computers. Mechanical Technology, Inc. has licensed the LANL DMFC
technology and spun off a company to commercialize DMFC for portable power applications.
Commercial interest also exists for DMFCs in remote and auxiliary power applications ranging
from low-power instrumentation to higher power (5 kW) auxiliary units in cars and trucks. The
military is also interested in DMFCs as a battery replacement for combat personnel and for battlefield applications. The Defense Advanced Research Projects Agency (DARPA) is collaborating with
the U.S. Department of Energy (DOE) in sponsoring DMFC research and development.

Future Activities
Research and development efforts on DMFC systems will aim at further lowering precious metal
requirements while improving power density. To address water management and system level
issues, fuel cell stacks will be scaled up to 1 kW peak power. Long-term operation and durability
testing will be initiated.

Partners in Success
U.S. Department of Defense - DARPA
Los Alamos National Laboratory

http://www.ott.doe.gov/success.html

You might also like