Scribd
Upload
97 views

GR-3 Modem Upgrade RevC IM2

Topcon GR-3

Uploaded by

jiortegaluengo3640
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
97 views

GR-3 Modem Upgrade RevC IM2

Topcon GR-3

Uploaded by

jiortegaluengo3640
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 16

P O S I T I O N I N G

S Y S T E M S

GR-3 Modem to GSM/CDMA


Upgrade Installation Manual

Part Number 7010-0822


Rev. C

Copyright Topcon Positioning Systems, Inc.


November, 2007
All contents in this manual are copyrighted by Topcon. All rights reserved. The information contained herein may not be
used, accessed, copied, stored, displayed, sold, modified, published, distributed, or otherwise reproduced without express
written consent from Topcon.

Terms and Conditions


Thank you for buying this Topcon product. This manual has been prepared to assist you with the servicing of the product
and its use/maintenance is subject to these Terms and Conditions and any more fully set forth in an Operators Manual.
Usage and Safety
This product is designed for use/service by professionals. Always use safety precautions when operating/servicing this or
any Topcon product.
Copyrights
All information contained in this Manual is the intellectual property of, and copyrighted material of TPS. All rights are
reserved. You may not use, access, copy, store, display, create derivative works of, sell, modify, publish, distribute, or
allow any third party access to, any graphics, content, information or data in this Manual without TPS express written
consent and may only use such information for the care and operation of your Product. The information and data in this
Manual are a valuable asset of TPS and are developed by the expenditure of considerable work, time and money, and are
the result of original selection, coordination and arrangement by TPS.
Trademarks
GR-3 and Topcon are trademarks or registered trademark of Topcon Positioning Systems, Inc. Windows and Outlook are
registered trademarks of Microsoft Corporation. InstallShield is a registered trademark of InstallShield Software
Corporation. The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Topcon
Positioning Systems, Inc. is used under license.
Other product and company names mentioned herein may be trademarks of their respective owners.
Disclaimer of Warranty
EXCEPT FOR SUCH WARRANTIES AND LICENSES PROVIDED WITH THE PRODUCT, THIS MANUAL AND
THE PRODUCT ARE PROVIDED AS-IS. TOPCON AND ITS DISTRIBUTORS SHALL NOT BE LIABLE FOR
TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN; NOR FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE OR USE OF THIS
MATERIAL OR THE PRODUCT.
Please see the Operators/Users Manual for detailed information on warranties and the license agreement which may
apply to the Product.
License Agreement
Use of any computer programs or software supplied by Topcon or downloaded from the Topcon website in connection
with the Product implies acceptance of the Terms and Conditions here and in the Operators/Users Manual.
Please see the Operators/Users Manual for detailed information on warranties and the license agreement which may
apply to the Product.

Manual Conventions
This manual uses the following conventions.

NOTE

TIP

NOTICE

ECO#3181

Further information to note about the


configuration, maintenance, or setup of a
system.

Supplementary information that can help


you configure, maintain, or set up a system.

Supplementary information that can have


an affect on system operation, system
performance, measurements, or personal
safety.

CAUTION

WARNING

DANGER

Notification that an action has the potential


to adversely affect system operation,
system performance, data integrity, or
personal health.

Notification that an action will result in


system damage, loss of data, loss of
warranty, or personal injury.

Under no circumstances should this action


be performed.

TOC

Table of Contents
Chapter 1
Installing the FH915+ Modem Upgrade.........................1-1
Getting Started .....................................................................................
Parts List .........................................................................................
Installing the FH915+ Modem Module ...............................................

1-2
1-2
1-3

Chapter 2
Installing the Digital UHF Modem Upgrade ..................2-1
Getting Started .....................................................................................
Parts List .........................................................................................
Installing the Digital UHF Modem Module ........................................

P/N 7010-0822

2-2
2-2
2-3

Table of Contents

Notes:

ii

GR-3 Modem to GSM/CDMA Upgrade Installation Manual

Chapter 1

Installing the FH915+


Modem Upgrade
The GR-3 receiver is a multi-frequency, GPS+ receiver built to be the most advanced and compact
receiver for the surveying market. The following is a quick reference guide to the GR-3 Operators
Manual on installing the FH915+ Modem Upgrade.

Chapter Contents
Getting Started on page 2
Installing the FH915+ Modem Module on
page 3

P/N 7010-0822

1-1

Installing the FH915+ Modem Upgrade

Getting Started
You will need the following tools to complete the upgrade:
Bluetooth Antenna Cable Extraction Tool (P/N: 34-850402-01)
Phillips screwdriver

NOTICE

Review all safety information in the GR-3 Operators


Manual and disassembly procedures before beginning to
disassemble the GR-3.

NOTE

Be sure to record the IMEI number on the new GSM


module for future reference. This number is needed to set
up telephone service for the GSM. This number can also
be accessed using Modem-TPS.

Parts List
Before you begin installing the GR-3 FH915+ Modem Upgrade, make sure your upgrade kit includes
the items listed below.
Table 1. Upgrade Contents

1-2

Qty

Part Number

Description

30-060001-01

MODULE,G24,GSM,850/900/1800/1900MHZ,EDGE

16-040803-01

SPACER, ROUND NYLON, OD 4 X 3MM

16-040802-01

NUT, HEX M2 STAINLESS STEEL

16-040801-01

SCR, M2.0 X 8 PAN HEAD PHILLIPS

14-004061-01

CABLE UMP/MMCX RA (0.04M)

GR-3 Modem to GSM/CDMA Upgrade Installation Manual

Installing the FH915+ Modem Module

Installing the FH915+ Modem Module


Follow the directions in the GR-3 Assembly Manual to remove the card cage assembly.
These steps walk you through installing the GSM module onto the GR-3 receiver.

Step 2: Remove the modem subassembly

Step 1: Remove the screw

Step

Procedure

Illustration

Remove the remaining middle-level


screw.

Remove the modem subassembly.

P/N 7010-0822

1-3

Installing the FH915+ Modem Upgrade

Step 5: Secure the module using


nuts and screws

Step 4: Place the modem module


onto the subassembly

Step 3: Connect the cable to


to the modem

Step

1-4

Procedure

Illustration

Connect the UMP/MMCX RA cable


to the FH915+ modem module.

Place the FH915+ module onto the


modem subassembly using the two
round nylon spacers.

Secure the FH915+module using the


two screws (M2,0x8 metric pan head
Phillips) and the two nuts (M2 metric
hex nut stainless steel) provided.

NOTE

Before securing the FH


915+ module, make
sure the connectors are
completely aligned
with the modem.

GR-3 Modem to GSM/CDMA Upgrade Installation Manual

Installing the FH915+ Modem Module

Step 8: Secure middle-level screws

Step 7: Insert modem subassembly


into the card cage

Step 6: Connect the cable to the


modem subassembly

Step

Procedure

Illustration

Connect the UMP/MMCX RA cable


to the modem subassembly.

Insert the modem subassembly into


the middle level of the card cage.

Secure the middle-level screw (M3x5


metric machine screw, Phillips,
stainless steel, pan head) into the card
cage.

Follow the directions in the GR-3 Assembly Manual to reinsert the card cage assembly.

P/N 7010-0822

1-5

Installing the FH915+ Modem Upgrade

Notes:

1-6

GR-3 Modem to GSM/CDMA Upgrade Installation Manual

Chapter 2

Installing the Digital UHF


Modem Upgrade
The GR-3 receiver is a multi-frequency, GPS+ receiver built to be the most advanced and compact
receiver for the surveying market. The following is a quick reference guide to the GR-3 Operators
Manual on installing the Digital UHF Modem Upgrade.

Chapter Contents
Getting Started on page 2-2
Installing the Digital UHF Modem Module
on page 2-3

P/N 7010-0822

2-1

Installing the Digital UHF Modem Upgrade

Getting Started
You will need the following tools to complete the upgrade:
Bluetooth Antenna Cable Extraction Tool (P/N: 34-850402-01)

Phillips screwdriver

NOTICE

Review all safety information in the GR-3 Operators


Manual and disassembly procedures before beginning to
disassemble the GR-3.

NOTE

Be sure to record the IMEI number on the new GSM


module for future reference. This number is needed to set
up telephone service for the GSM. This number can also
be accessed using Modem-TPS.

Parts List
Before you begin installing the GR-3 Digital UHF Modem Upgrade, make sure your upgrade kit
includes one of the items listed below.
Table 1. Upgrade Contents

2-2

Qty

Part Number

Description

02-050915-02

PCBA ARWEST + EURO GSM

02-050915-03

PCBA Digital UHF + US GSM

02-050915-04

PCBA Digital UHF + Sprint CDMA

02-050915-05

PCBA Digital UHF + Verizon CDMA

GR-3 Modem to GSM/CDMA Upgrade Installation Manual

Installing the Digital UHF Modem Module

Installing the Digital UHF Modem Module


Follow the directions in the GR-3 Assembly Manual to remove the card cage assembly.
These steps walk you through removing the from the card cage.

Step 1: Remove the middle-level screw

Step

Procedure

Illustration

Remove the remaining middle-level


screw.

Step 2: Remove the modem subassembly

Remove the modem subassembly.

P/N 7010-0822

2-3

Step 4: Secure middle-level screw

Step 3: Insert the Digital UHF Modem

Installing the Digital UHF Modem Upgrade

Insert the Digital UHF Modem


module.

Secure the middle-level screw

Follow the directions in the GR-3 Assembly Manual to reinsert the card cage assembly.

2-4

GR-3 Modem to GSM/CDMA Upgrade Installation Manual

Installing the Digital UHF Modem Module

P/N 7010-0822

2-5

Installing the Digital UHF Modem Upgrade

Notes:

2-6

GR-3 Modem to GSM/CDMA Upgrade Installation Manual

You might also like