IACSIT International Journal of Engineering and Technology, Vol. 8, No.

2, April 2016

Manual Rendering Techniques in Architecture

Ali Dashti Shafii, Babak Monir Abbasi, and Shiva Jabari
other arts. Never should it be oriented towards painting and
caricature. The more proper statement is that line drawing of
an architect must be perfect because it results to an estate,
not just a painting compass!
In fact, architecture is an experimental technique of art
which comes from continuous experience leading to
elaboration of skills. An ideal architectural work results
from a perfect observation of architectural designing. This
quality of an architect is a fruit of their elaborate subtle style
[3].

AbstractOne of the most important roles of architects is

the spiritization of designing by means of proper tools and
techniques; this is done by a good rendering job. A good hand
rendering task employs correct colorings into itself to express
all the details, materials, shadows and textures. Recently,
though, due to rendering software for drawing a perspective
and finalizing it, a growing number of young architects and
designers just hop straight onto their computers and work
their ideas out. I believe they should work out hands, since
nothing is better to get a point across in a design meeting than
to be able to sketch it up real quick right in front of the client.
Many clients are still wowed by hand drawn drawings. Hand
rendering can soften drawings and even make computer
generated images look more personal. In this short paper, we
are trying to present some essential and delicate points in hand
rendering (rendu). It would be helpful for designers who wish
to improve their manual rendering techniques.
Index TermsArchitectural
techniques, textures.

rendering,

coloring,

III. SHADOW

fast

I. INTRODUCTION
Human being employs various expressions to
communicate and convey their thoughts. The most
important way of expression among humans is language,
which is used in direct communication. Of course there are
other means for man to relate their ideas. Art is the kind of
expression which is used to conduct emotional, sensational
and indirect communication of ideas.
Designing is the expression for architecture. Architecture
must be designed before being built. The idea behind an
architect's plan is conveyed through designing. So designing,
a very important expression, is a must in architectural
education [1]. To learn architectural concepts, scholars must
learn architectural expression and architectural designing.
The more skilled in this field they are, the more successful
in their presentation of ideas they would be. Thus, designing
is very important and superior in architecture.

Great architectural works of art always have shadow

designed as their architectural component (see Fig. 1). It is
absolutely a climatic component and differs from climate to
climate. As an aesthetic viewpoint, it brings climate and
movement to the space of an architecture.
A scientific shadowing requires projection angle, plan,
light source and its illustration. These all may not be always
available. There are six reasons to apply shadow in
architecture:
y
y
y
y
y
y

Definition of form
Definition of site
Definition of light direction (direction of light defines
the main axle in buildings cities)
Definition of time
Definition of different climate conditions
Rendering of work, out of paper's white background

Designers pay a special attention to the shadow

component of landscape architecture. Especially, in climate
conditions that require particular conservation of human
facilities [3].

II. THE IMPORTANCE OF LINE DRAWING

Line drawing is the first and superior requirement in
architectural designing process. In fact, the line drawing of
an architect is the signature and personality of their
architecture [2]. Their line may be fair and sensational, so
becomes the outcome of the designing, like French and
Italian architecture. Or it may be solid and strong line, so
becomes the result, like German architecture. Architectural
line is very dear and cannot be compared to line drawings of

Fig. 1. Shadow.

IV. BASICS OF COLOR RENDERING

Architectural rendering is the art of presenting
architecture. Rendering can be applied to a whole building;
on a plan, cross-section, facade, details etc. We usually
apply rendering to spatial fixtures such as shelves,

Manuscript received June 15, 2014; revised August 13, 2014.

The authors are with the Shomal Universty of Amol, Iran (e-mail:
[email protected])

DOI: 10.7763/IJET.2016.V8.874

141

IACSIT International Journal of Engineering and Technology, Vol. 8, No. 2, April 2016

projections, hollows and so on [4].

To express the mood of environment, unfixed furniture is
used, such as table and chair; there is no need in full
coloring (see Fig. 2). A technical way of rendering is to
show large or big components without coloring. Large
surfaces like ground, water and sky need no specific color.
To show water without the use of color, you can draw a
reflection.

building's surfaces, because:

y
y
y

it reduces the use of color

materials are employed to functions, climate and
ecosystem of the estate
it harmonizes the estate

To draw various materials, one should be highly creative

in genesis of diverse textures. This kind of creativity comes
from a keen observation of materials and abstract sketching
of them. Such designing knowledge and skill comes to
architects as a result of drawing diverse textures which
belong to different climate conditions [5].
VII. ARCHITECTURAL RENDERING TECHNIQUES
Rendering is a technique which is done by any tool if one
has the knowledge of coloring and applying the correct rules;
in fact, rendering means the better presentation of one work.
Architectural rendering techniques include magic marker,
water-color, colored pencil, normal pencil, charcoal, pastel,
water-ink, match-ink, linear rendering, tea, bleach, dry/fresh
black marker, dry colored marker, scrubber, correction fluid,
white roller-ball pen, acetone...

Fig. 2. Color rendering.

VIII. MAGIC MARKER RENDERING

Magic marker can be used to color (paint) surfaces and
planes in a rendering sheet. It also can be used to draw
various textures on planes [5]. For magic marker rendering
you should first outline the plan by a red pencil (because it
can be mixed with markers color), then after finishing the
outline, the direction of light must be defined. In this style
of rendering, you render minor surfaces instead of coloring
large surfaces (e.g. glasses, water).
Using ink-pen and white roller-ball pen to draw materials
on various surfaces, makes your work more seasoned.

Fig. 3. Texture.

First, one should imagine correctly, then apply a correct

color; then architecturally render the sheet. Various
techniques for rendering exist; one of the professional tools
for architectural rendering is the magic marker technique.

IX. WATER-INK

V. THE DIFFERENCE BETWEEN ARCHITECTURE AND THE

ART OF PAINTING/GRAPHICS
Lines and borders are very dear in architecture. Coloring is
a means to define surfaces, the atmosphere, and the
separation of planes between lines. In painting and graphics,
borders are defined by colors. In fact, color acts as line for
painting and graphics.
VI. TEXTURE
There exist various solutions to present components of a
building such as plan, facade, cross-section and perspective.
It depends upon the architect's creativity and knowledge to
choose from, e.g. coloring and collage-making [4].
A crucial part of architectural designing is to choose
material and the right type of it in the right place (see Fig. 3).
The most technical way of projecting these elements is to
draw the building materials with regard to climate,
ecosystem and time. This is superior to mere coloring of
142

This is the one of the most professional rendering styles;

it uses different tones of a same color on different surfaces
of an architecture to express it [6].
This tool can be used easily to create any texture, and to
show the light and its direction. Colors are usual on a
building and the use of brown, indigo and black is usual in
this kind of rendering. It is important to choose and use a
quality ink for this style (see Fig. 4). This rendering usually
is done on large sheets on which an application of color
contrasts makes the design more attractive to eyes.
Also in this technique, you should sketch by a smooth
pencil, so that the sketch can be removed easily at the end
and the result becomes more natural; in this manner the
most beautiful skies and waters can be drawn [6].
X. MONOTONE BLACK RENDERING
This is one of the fastest professional rendering styles
(see Fig. 5). Its application is comparable to water-ink
technique. Due to high color-contrast, this style is very

IACSIT International Journal of Engineering and Technology, Vol. 8, No. 2, April 2016

attractive in terms of visuals. White roller-ball pen can be

used easily to draw materials and textures on the surfaces of
this rendering.

application of scream-colors results to a more attractive

work.

Fig. 7. Monotone rendering by magic marker.

Fig. 4. Water-ink.

XIII. WATER-COLOR
Due to numerous varieties of colors and facility of
combining, this is one of the best rendering tools. It is used
for more realistic illustrations; the quality of the water-color
in use is of significant importance [6]. The more quality of
the water-color be, the sooner its colors shall be dried and
mat.
XIV. MATCH RENDERING
Fig. 5. Monotone black rendering.

XI. LINEAR RENDERING

This is a fast rendering style which uses minimum tools
and means at the best timing to show any target on a
building architecture (see Fig. 6). Use this rendering style
when defining many textures; and also when you are going
to define light direction on the architectures different layers,
providing the observation of line density.

Lines in this style are porous and hollow, so they gain a

specific importance. For the nature of this style, surfaces
acquire a filled-blank pattern, as if the planes are made of
piled match sticks [7].
For the purpose of this style, a 2mm mechanical pencil is
used. Match stick is stripped using a cutter. Then, as a lead,
it is driven into the mechanical pencils leadholder. A
quality ink (with a specific color) is selected, then
matchhead soaked with the ink gives you a kind of brush.
Use it to draw your design on the sheet.
XV. BLEACH
Bleach rendering can be operated on a colored card stock.
A bleach removes papers color and gives it a white or
brighter color (see Fig. 8). Bleach can be mixed with various
colors to create a specific color. Combination of bleach with
different amounts of water, gives different color intensities.
It is applied on the card using a brush; other tools like white
ink, magic marker and roller-ball pen can be used too. To do
this you should outline the primary work on a sheet (card
stock) by a pencil, then begin to render it using brush and
bleach [7].

Fig. 6. Linear rendering.

XII. MONOTONE RENDERING BY MAGIC MARKER

(EXCLUDING BLACK MARKER)
Be audacious! Choose only one color among markers and
let go of others (see Fig. 7). Draw your work by pencil or
roller-ball pen, and then define the direction of light. Begin
with coloring of darker layers, that is back-lighted layers,
and then go through brighter layers like ceiling, floor, and
front-lighted layers. Re-coloring of darker layers by the
marker, gives you more intense colors. Usually, an

Fig. 8. Bleach rendering.

143

IACSIT International Journal of Engineering and Technology, Vol. 8, No. 2, April 2016

Pen among them, is slightly different, because both its

powder and solid forms can be employed (see Fig. 11).
though the solid form is a more professional approach. Eye
shadow should be of the dry and non-rosemary kind.

XVI. RENDERING INDOOR PERSPECTIVE

When working on indoor perspectives, sometimes it is
needed to show them in a better way or to express their
spatial dimensions. Then it comes to perspective rendering.
There are some techniques and tools to do this (see Fig. 9)
This first step normally deals with coloring of sequences to
define the depth of space. Large surfaces like floor, ceiling,
and walls should not be rendered much, because the use
of color increases and the work becomes a painting.

XVIII. COMPOSITE RENDERING

Most creative rendering works are made up of several
techniques and tools that are combined and presented in an
artistic fashion. To do this you should master more
rendering applications and qualities (see Fig. 12). When
bigger sheets are needed for a work, or it comes to diversity,
you as an architect can use combination of methods [8].

Fig. 9. Indoor perspective.

To decrease the use of color, light direction should be

defined and shadows of different objects on floor and
surfaces should be drawn. Some effects like reflection on
the floor and glasses give a more vivid semblance to the
work.

Fig. 12. Composite rendering.

XVII. PEN, PASTEL, EYE-SHADOW RENDERING

XIX. RENDERING OF FAADE

To use such tools you should be very careful, firstly

because they need to be fixed on paper, and secondly
because the expressive power delivered by them isnt much
like marker or water-color rendering [8] (see Fig. 10). They
are used for fast rendering and are very handy and
accessible.These tools are used merely to render sky or large
surfaces in many occasions.

Architectural lines are technical components, so in faade

rendering you shouldnt deteriorate them when designing.
Drawing of sky and trees is allowed in non-technical
rendering, but for the purpose of technical rendering,
drawing trees and sky just for beatifying motives is not
appropriate [9].
Technical rendering methods in architecture include
shadowing, drawing ground, drawing various textures,
drawing soft shadows, inclusion of very abstract shapes of
figures and trees without any color and just for scaling,
defining glasses as transparent element
XX. RENDERING OF SITE PLAN
The purpose of this rendering is to define the plan in a
better and more understandable fashion; usually site is
colored more detailed, but on rendering a site plan, dont
involve yourself with colors, because it shall take you much
time. On technical rendering of plan, dont use color inside
of it, let there be completely clean and white. At most, you
can apply shadows to walls [9]. Render around the plan so
that it project itself. For minimum use of color and increased
readability, dont apply colors to both routs and spaces
between; color just one of them. White segments of work
leads to a more attractive and breathy product.
For site rendering you can use a monotone color or a
selection of scream colors. That is personal and not
obligatory to choose what types of colors. When a plan is
defined as a component of sketch sheet, it should be
rendered in harmony with the whole sheet and its elements.

Fig. 10. Eye-shadow rendering.

Fig. 11. Pastel rendering.

144

IACSIT International Journal of Engineering and Technology, Vol. 8, No. 2, April 2016
[8]

XXI. CONCLUSION
A good architectural rendering job which is smart and
elaborate (and is considerate about lines, shadows, coloring
rules, color psychology, textures, various renderings like
faade, plan and site) gives spirit to your work and is
pleasing to the sight of observers. Always be careful and
loyal to rendering basics and rules so as to present a correct
and professional rendering job.

[9]

Ali Dashti Shafii was borin in Iran, 1949. He

recevied his PhD. in architecture venice, Italy in
1976, he is a professional urban planner, Venice,
Italy in 1977, he has been worked over forty years
of professional architectural experience.
He
published with over 100 papers (including 40 ISI
essays).
An authenticated author of urban
planning: the author of modern planning, building
a project, fiber carbon for quake-resistance.

REFERENCES
[1]
[2]
[3]
[4]
[5]
[6]
[7]

M. M. Mahmoodi and K. Taghizadeh, Information Technology and

Instructional changes in Architectural engineering, presented at the
National Instructional Conference on Engineering, Iran, Tehran, 1999.
H. Karimi, Teaching architectural drawing through information
technology, presented at the National Conference on Urban Planning
and Architecture, Iran, Tabriz, April, 2012.

E. Tayefe, How to draw architecturally 1, Elme Memar Institution,

2008, ch. 5, pp. 98-99.
E. Tayefe, How to draw architecturally 2, Elme Memar Institution,
2009, ch. 2.
E. Tayefe, How to draw architecturally 3, Elme Memar Institution,
2010, pp. 44-45.
Q. Akrami, The introduction section of previous book, in How to
dram How to draw architecturally 3, E. Tayefe, Ed. 2010.
H. R. Derakhshan, Drawing skills tutural and its role in Architectural
drawing presented at the third National Architecture conference,
Iran, March 15-16, 2013.
E. K. Motlagh, Creativing in architectural form and methods of
creativing development, presented at the international conference of
Civil Engineering and Architecture, Iran, 2013.
S. Gheishavizade and A. R. Taghizadeh, Use of software: a new
approach in architectural drawing, presented at the first national
conference on Urban Planning and Architecture across times, Iran,
Tehran, 2013.

Babak Monir Abbasi holds master of architecture from Shabestar, Iran

and he teaches at different universities such as Parand Payam Noor, Parand
Islamic Azad University. Now he is working with Dr. Dashti on some
project. He as an assistant.
Miss Shiva Jabari was born in Iran, 1992. She is a scholar at Shomal
Univevrsity of Amol, Iran. She has good English language skills, She has
worked as the corresponding author and she is Mr. Dashtis editorial
assistant. She mainly works as a translator and editor.

145